Intel Intel Core Duo/Solo 945GM manuale d’uso

P/N: 600C0026050 10 ADE - 6050 Intel Core Duo/Solo 945GM Mini ITX Board User ’ s Manual Rev. 1.0 2007 /1/ 8[...]

ADE - 6050 User ’ s Manual 2 / 48 Copyright All rights reserved. The information contained in this guide has been validated and reviewed for accuracy. No patent liability is assumed with re spect to the use of the information contained herein. While every precaution has been taken in the preparation of this guide, the Manufacturer assumes no resp[...]

ADE - 6050 User ’ s Manual 3 / 48 How to Use This Manual This manual is written for the system integrator, PC technician and knowledgeable PC end user. It describes how to configure your system boa rd to meet various operating requirements. The user’s manual is divided into four chapters, with each chapter addressing a basic concept and operati[...]

ADE - 6050 User ’ s Manual 4 / 48 Table of Content 1. Introduction .......................................................................................................................... 8 1.1 De scription ....................................................................................................................... 8 1.2 Packing Check[...]

ADE - 6050 User ’ s Manual 5 / 48 3. System Installation ......................................................................................................... 23 3.1 Socket 478 Processors ................................................................................................ 23 3.1.1 Installing CPU ...................................[...]

ADE - 6050 User ’ s Manual 6 / 48[...]

ADE - 6050 User ’ s Manual 7 / 48 CHAPTER 1[...]

ADE - 6050 User ’ s Manual 8 / 48 1. Introduction 1.1 Description The ADE - 6050 all - in - one Mini - ITX is designed to fit a high performance Intel R Core TM Duo based processor and compatible for high - end comput er system applications with PCI bus architecture to meet today ’ s demanding pace and keep complete compatibility with hardware [...]

ADE - 6050 User ’ s Manual 9 / 48 1.2 Pac king Check List The ADE - 6050 package includes the following basic items accompany with this manual. Ø One Mini ITX ADE - 6050 SBC Ø One Installation Guide for ADE - 6050 Ø One 40 - pin IDE cable Ø One Serial ATA cable Ø One USB cable Ø One Serial port for RS232 cable Ø One I /O S hield cover Ø O[...]

ADE - 6050 User ’ s Manual 10 / 48 1.3 Specifications System CPU I ntel ® Core ™ Duo / Solo and Celeron ® M processor (Yonah Core) I ntel ® Core ™ 2 Duo Mobile processor on Napa refresh (Merom/Socket M) FSB FSB 533/667 MHz BIOS Award BIOS with 4 Mb Flash ROM System Chipset Intel ® 945GM + ICH7 M I/O Chip ITE ® IT 8712 F System Memory 2 x[...]

ADE - 6050 User ’ s Manual 11 / 48 Audio AC97 Codec Realtek ® ALC 655 5.1CH 3D audio code c Audio Interface Line in, Line out , Mic in by jack , CD - in by pin header Ethernet Chipset Dual Marvell ® 88E8053 PCI - E Gigabit Ethernet controllers Ethernet Interface IEEE 802.3 10/100 /1000 BASE - T X Mechanical & Environmental Power Requirement[...]

ADE - 6050 User ’ s Manual 12 / 48 1.4 System Architecture All of details operating relations are shown in ADE - 6050 s ystem b lock d iagram. Micro FCPGA for Intel Cor e Du o Solo Processor / CK-410M IMVP6 GMCH (945GM) 1466 FCBGA ICH7M 652 mBGA DDR 2 S O DIMM 533/667 X2 - CRT & LCD Super I/O IT8712F ATA100 USB2.0 Keyboard Mouse COM 1 / 2 PCI[...]

ADE - 6050 User ’ s Manual 13 / 48 1.5 Dimensions 33.0 10.2 132.1 6 . 2 1 6 3 . 7 1 7 0 170 10.51 0 39.5 78.51 106.17 128.61 146.35 6.5 22.0 35.5 G G Unit: mm[...]

ADE - 6050 User ’ s Manual 14 / 48 CHAPTER 2[...]

ADE - 6050 User ’ s Manual 15 / 48 2. Hardware Configuration Setting This chapter gives the definitions and shows the positions of jumpers, headers and connectors. All of the configuration jumpers on the board are in the proper po sition. The default settings shipped from factory are marked with an asterisk ( « ). In general, jumpers on the boar[...]

ADE - 6050 User ’ s Manual 16 / 48 2.1 Board Layout CN12 CN2 CN8 CN11 95P08 EXT. KB/MS KB/MS COM1 USB 45 / USB 67 / LVDS-CONN LIN E OUT CN3 CN4 CRT DVI CN7 COM2 CN6 CN5 CN1 A UD I O CN9 SATA2 SATA1 IDE1 P C I 1 P C I E X 1 CN18 COM3 CN19 COM4 CF CN20 CN21 JP2 JP4 CN14 CN15 CN16 JP3 D I MM 1 D I MM 2 CN10 JP1 LIN E OUT C D IN - LAN 2 USB 23 / LAN [...]

ADE - 6050 User ’ s Manual 17 / 48 2.2 Jumpers & Connectors JUMPERS FUNCTION REMARK JP1 LVDS power select 1 x 3 header JP2 Clear CMOS s elect 1 x 3 header JP3 Auto power on select 1 x 2 header JP4 BI OS write protection s elect 1 x 3 header CONNECTORS FU NCTION REMARK CN1 Audio connector CN2 COM1/2 RS232 serial port connectors CN3 PS/2 mouse [...]

ADE - 6050 User ’ s Manual 18 / 48 2.3 Jumpers - Setting & Conn ectors description 2.3.1 LCD power setting select : J P1 2.3.2 Clear CMOS s etting s elect: J P2 PIN No. Description 1 - 2 3.3V « 2 - 3 5V PIN No. Description 1 - 2 Normal operation « 2 - 3 Clear CMOS 2.3.3 Auto power on select: JP3 2.3.4 BI OS write protection setting: JP4 PIN[...]

ADE - 6050 User ’ s Manual 19 / 48 2.3.9 LAN 1 + USB 0/1 & LAN 2 + USB 2/3 Connectors: CN6 & CN5 LAN 1/2 PIN No. Description PIN No. Description 1 MDI0+ 5 MDI2+ 2 MDI0 - 6 MDI2 - 3 MDI1+ 7 MDI3+ 4 MDI1 - 8 MDI3 - USB 0/1/2/3 PIN No. Description PIN No. Description 1 +5 V (fused) 5 +5 V (fused) 2 USBP0 - /2 - 6 USBP1 - /3 - 3 USBP0+ /2+ 7 [...]

ADE - 6050 User ’ s Manual 20 / 48 2.3.13 Line out Connector: C N9 2.3.14 LVDS Connector: CN10 PIN No. Description 1 LOUT_L 2 Ground 3 Ground 4 LOUT_R Description PIN No. PIN No. Description NC 2 1 NC Ground 4 3 Ground LVDS_YAM1 6 5 LVDS_YAM0 LVDS_YAP1 8 7 LVDS_YAP0 Ground 10 9 Ground LVDS_CLKAM 12 11 LVDS_YAM2 LVDS_CLKAP 14 13 LVDS_YAP2 Ground 1[...]

ADE - 6050 User ’ s Manual 21 / 48 2.3.19 8 - bit Digital I/O Connector: CN20 2.3.20 Front Panel Connector: CN21 Description PIN No. PIN No. Description EXT_VDD 1 2 I1 O1 3 4 I2 O2 5 6 I3 O3 7 8 I4 O4 9 10 EXT_VSS Description PIN No. PIN No. Description IR DA RESET +5V 1 2 RESET+ NC 3 4 RE SET - IRRX 5 SPEAKER Ground 7 8 SPEAKE R IRTX 9 10 BUZZ H[...]

ADE - 6050 User ’ s Manual 22 / 48 CHAPTER 3[...]

ADE - 6050 User ’ s Manual 23 / 48 3. System Installation This chapter prov ides you with instructions on ho w to setup your system. The additional information shows you how to install CPU / FAN and memory . 3.1 Socket 478 Processors 3.1.1 Installing CPU w Check and confirm that you are going to install correctly CPU type and pin numbers . w Take[...]

ADE - 6050 User ’ s Manual 24 / 48 3.3 Main Memory The f igure s display the notch marks and what they should look like on your SO - DIMM memory module. SO - DIMM ha s 200 - pins and two notches, that will match with the onboard SO - DIMM socket. M emory modules are installed by placing the chip firmly into the socket at a parallel angle and pres[...]

ADE - 6050 User ’ s Manual 25 / 48 CHAPTER 4[...]

ADE - 6050 User ’ s Manual 26 / 48 4. BIOS Setup 4.1 Entering Setup PHOE NIX - AWARD ™ has a built - in setup program that allows users to modify the basic system configuration. This information is stored in CMOS RAM whose power is supplied by a battery so that it can retain the setup information even when the power is turned off. P ress the ke[...]

ADE - 6050 User ’ s Manual 27 / 48 4.2.1 Standard CMOS Features 4.2.1.1 Date (mm/date/year) : Set the system date. Note that the ‘Day ’ automatically changes when you set the date. 4.2.1.2 Time (hh/mm/ss) : Set the system time. 4.2.1.3 IDE Channel 0 / 1 Master : Press <Enter> to enter the sub menu of detailed options. 4.2.1.4 IDE Channe[...]

ADE - 6050 User ’ s Manual 28 / 48 4.2.1.7 Halt On : Select the situation in which you want the BIOS to stop the POST process and notify you. The Choice: All Errors/No Errors/All, but Keyboard/All, but Diskette/ All, but Disk/Key . 4.2.1.8 Base Memory : Displays the amount of conventional memory detected during boot up. 4.2.1.9 Extended Memory : [...]

ADE - 6050 User ’ s Manual 29 / 48 4.2.2.1 CPU Feature 4.2.2.1.1 Delay Prior to Thermal : Select this item allows the delay prior to thermal time. The Choice: Auto, 4, 8, 16, 32Min . 4.2.2.1.2 Execute Disable Bit: Select when disable, forces the XD feature flag to always return 0. T he choice: Enabled, Disabled. 4.2.2.2 Virus Warning : Allow you [...]

ADE - 6050 User ’ s Manual 30 / 48 4.2.2.4 Quick Power On Self Test This category speeds up Power On Self Test (POST) after you power up the computer. If it is set to Enable, BIOS will shorten or skip some check items during POST. The choice: Enabled, Disabled. 4.2.2.5 Boot Up NumLock Status Select power on st ate for NumLock. The choice: On, Off[...]

ADE - 6050 User ’ s Manual 31 / 48 4.2.2.13 OS Se lect For DRAM > 64MB Select the operating system that is running with greater than 64MB of RAM on the system. The choice: Non - OS2, OS2. 4.2.2.14 Cache Setup 4.2.2.14.1 CPU L1& L2 Cache These two categories speed up memory access. However, it depends on CPU/chipset desig n. The choice: Ena[...]

ADE - 6050 User ’ s Manual 32 / 48 4.2.2.15 Boot Seq & Floppy Setup 4.2.2.15.1 Hard Disk Boot Priority Press Enter and It shows Bootable add - in Card. 4.2.2.15.2 First/Second/Third Boot Device The BIOS attempts to load the operating system from the devices in the sequence selected in these items. The choice: Floppy, LS/ZIP, HDD, SCSI, CDROM [...]

ADE - 6050 User ’ s Manual 33 / 48 4.2.3 Advanced Chipset Features 4.2.3.1 DRAM Timing Selectable Select the operating system that is selecting DRAM timing, so select SPD for setting SDRAM timing by SPD. Th e Choice: Manual, By SPD . 4.2.3.2 CAS Latency Time When synchronous DRAM is installed, the number of clock cycles of CAS latency depends on [...]

ADE - 6050 User ’ s Manual 34 / 48 4.2.3.4 DRAM RAS# Precharge If an insufficient number of cycles are allowed for the RAS to accumulate its charge before DRAM refresh, the refresh may be incomplete and the DRAM may fail to retain data. Fast gives faster performance; and Slow gives more stable performance. This field applies only when synchronous[...]

ADE - 6050 User ’ s Manual 35 / 48 4.2.3.10 PCI Express Root Port Function 4.2.3.10.1 PCI Express x1 Slot This item allows you to active PCI Express . The choice: Auto, Enabled, Disabled. 4.2.3.10.2 PCI - E Compliancy Mode This item allows you to choose PCI - E Compliancy Mode. The choice: v1.0a, v1.0. 4.2.3.11 P EG/Onchip VGA Control This item a[...]

ADE - 6050 User ’ s Manual 36 / 48 4.2.3.14 DVMT/FIXED Memory Size This item allows you to select the DVMT or FIXED memory size. 4.2.3.15 Boot Display This item allows you to select the boot display device. 4.2.3.16 Panel Scaling This item allows you to enable or disable the Scaling function. The choice: AUTO, ON, OFF. 4.2.3.17 Panel Number This [...]

ADE - 6050 User ’ s Manual 37 / 48 4.2.4.1 Onchip IDE Device 4.2.4.2.1. IDE HDD Block Mode Block mode is also called block transfer, multiple commands, or multiple sector read/write. If your IDE hard drive suppor ts block mode (most new drives do), select Enabled for automatic detection of the optimal number of block read/writes per sector the dr[...]

ADE - 6050 User ’ s Manual 38 / 48 4.2.4.2.4. IDE Primary/Secondary Master/Slave PIO The four IDE PIO (Programmed Input/Output) fields let you set a PIO mode (0 - 4) for each of the four IDE devices that the onboard IDE interface supports. Modes 0 throug h 4 provide successively increased performance. In Auto mode, the system automatically determ[...]

ADE - 6050 User ’ s Manual 39 / 48 4.2.4.2 Onboard Device 4.2.4.2.1. Onboard Giga Lan 2 Select “Enabled” if your system has a LAN device installed on the system board and you wish to use it. The choice: Auto, Enabled, Disabled. 4.2.4.2.2. USB Controller Select “Enabled” if your system contains a Universal Serial Bus (USB) controller and y[...]

ADE - 6050 User ’ s Manual 40 / 48 4.2.4.2.5. USB Mous e Support Select “Enabled” if your system contains a Universal Serial Bus (USB) controller and you have a USB mouse . The choice: Enabled, Disabled. 4.2.4.2.6. Azalia/AC97 Audio Select This item allows you to select the chipset family to support AC97 Audio The choice : Auto, Azalia, AC97 [...]

ADE - 6050 User ’ s Manual 41 / 48 4.2.4.2.3. UR2 Duplex Mode Select the value required by the IR device connected to the IR port . Full - duplex mode permits simultaneous two - direction transmission. Half - duplex mode permits transmission in one direction only at a time. The choice: Half, Full. 4.2.4.2.4. PWRON After PWR - Fail This item allow[...]

ADE - 6050 User ’ s Manual 42 / 48 4.2.5.3 Power Management This category allows you to select the type (or degree) of power saving and is directly related to the following modes: 1. HDD Power Down , 2. Doze Mode , 3. Suspend Mode Min. Power Sav ing: Minimum power management. Doze Mode = 1 hr. Standby Mode = 1 hr., Suspend Mode = 1 hr., and HDD P[...]

ADE - 6050 User ’ s Manual 43 / 48 4.2.5.8 HDD Power Down When “Enabled” and after the set time of system inactivity, the ha rd disk drive will be powered down while all other devices remain active. The choice: Disabled, 1~15Min. 4.2.5.9 Sort - Off by PWR - BTTN Pressing the power button for more than 4 seconds forces the system to enter the [...]

ADE - 6050 User ’ s Manual 44 / 48 4.2.6 PnP/PCI /PCI - E Configurations 4.2.6.1 Init Display First This item allows you to decide to active whether PCI Slot or on - chip VGA first. 4.2.6.2 Reset Configuration Data Normally, you leave this field Disabled. Select “Enabled” t o reset Extended System Configuration Data (ESCD) when you exit Setup[...]

ADE - 6050 User ’ s Manual 45 / 48 4.2.6.3.1 IRQ Resources When resources are controlled manually, assign each system interrupt a type, dep ending on the type of device using the DMA channel. 4.2.6.4 PCI/VGA Palette Snoop This function determines if the graphics card should allow VGA palette snooping by a fixed function display card. It is only u[...]

ADE - 6050 User ’ s Manual 46 / 48 4.2.7.2 Vcore The voltage level of CPU (Vcore). 4.2.7.3 +3.3V/ +5V/+12V / - 12V/5Vsb Show you the voltage of +3.3V/ +5V/+12V / - 12V. 4.2.7.4 Voltage Battery Show you the voltage level of the battery. 4.2.7.5 S yste m/CPU Temp erature Show you the current system /CPU temperature. 4.2.7.6 System/ CPU F AN Speed S[...]

ADE - 6050 User ’ s Manual 47 / 48 4.2.10 Supervisor/User Password Setting You can set either supervisor or user password, or both of then. The differences between are: Set Supervisor Password: can enter and change the options of the setup menus. Set User Password: just can only enter but do not have the right to change the options of the setup m[...]

ADE - 6050 User ’ s Manual 48 / 48 4.2.11 Exit Selecting Save & Exit Setup Pressing <Enter> on this item asks for confirmation: Save to CMOS and EXIT (Y/N)? Y Pressing “Y” stores the select ions made in the menus in CMOS – a special section of memory that stays on after you turn your system off. The next time you boot your compute[...]