Intel ECB-865 manuale d’uso

Part No.2047865000 User’s Manual ECB-865 Intel 815E Tualatin Pentium III / Celeron Full-size CPU Card 1 st Ed. – 7 February 2002[...]

ECB-865 Evalue Technolog y Inc. FCC STA TEMENT THIS DEVICE COMPLIES W ITH PART 15 FCC RULES. OPERATION IS SU BJECT TO THE FOLLOW ING TW O CONDITIONS: (1) THIS DE VICE MAY NOT CA USE HARMFUL INT ERFERENCE. (2) THIS DEVICE M UST ACCEPT ANY INTERFER ENCE RECEIVED INCL UDING INTERFERENCE THAT MA Y CAUSE UNDESIRE D OPERATION. THIS EQUIPMENT HAS BEEN T E[...]

User’s Manual Evalue Technolog y Inc. Copy right Notice Copyr ight  2000, 2001, Ev alue Technology Inc., ALL RIGHTS RESERVED. No part of this document may be reproduced, copi ed, translated, or tr ansmitted in any form or by any means, electronic or mechanical, for any purpose, without the prior wr itten permission of the orig inal manufacture[...]

ECB-865 Evalue Technolog y Inc. A Message to the Customer Evalue C ustomer Serv ices Each and every Evalue’s pr oduct is built to the most ex acting speci fications to ensure reliabl e performance in the harsh and demanding conditions typi cal of industrial envir onments. W hether your new Eval ue device i s destined for the laborator y or the fa[...]

User’s Manual Evalue Technolog y Inc. Product Warranty Evalue warrants to you, the original purchaser, that each of its products w ill be free from defects in materials and w orkmanship for tw o years from the date of purchase. This war ranty does not appl y to any products whi ch hav e been r epaired or altered by persons other than repai r pers[...]

ECB-865 Evalue Technolog y Inc. Packing List Before you begin installing y our single board, please make sure that the following materials hav e been shipped:  1 ECB-865 Full -size C eleron / Pentium III sing le board  1 Quick Installation Gui de  1 CD-R OM contains the followi ngs: — User’s Manual (this manual in PDF file) — Etherne[...]

User’s Manual Evalue Technolog y Inc. 1. MA NUAL OBJECTIVES .............................................................................................1 2. INTRODUCTION .........................................................................................................2 2.1 Sy stem Ov erview ................................................[...]

ECB-865 Evalue Technolog y Inc. 3.10 Setting Jumpers ...................................................................................................20 3.10.1 Clear C MOS (JP9) ..................................................................................................... 21 3.10.2 W atchdog T imer .........................................[...]

User’s Manual Evalue Technolog y Inc. 4.2 A MI BIOS Setup Main Menu ................................................................................ 51 4.3 CMOS Setup Reference Table .............................................................................52 4.3.1 Standard CM OS Setup M enu.....................................................[...]

ECB-865 Evalue Technolog y Inc. Document A mendment History Revision Date By Comment 1 st Feb. 02. Harris C hen Initial Rel ease[...]

ECB-865 ECB-865 Us er’s Manual 1 1. Manual Objectives This manual describes i n detail the Eval ue Technology EC B-865 Singl e Board. W e have tried to incl ude as much information as possible but w e have not dupli cated information that is prov ided in the standard IBM Technical References, unless it prov ed to be necessary to aid in the unders[...]

User’s Manual 2 ECB-865 Us er’s Manual 2. Introducti on 2.1 Sy stem Overv iew The ECB-865 is an all -in-one Ful l-siz e Pentium III / Celeron Si ngle Board C omputer (SBC) designed w ith Intel embedded chipset 815E- B which suppor ts the latest Intel FC-PGA/FC- PGA2 Pentium III / Celeron pr ocessor (Copper Mine and Tualatin) up to 1.1GH z or ab[...]

ECB-865 ECB-865 Us er’s Manual 3 2.2 Sy stem Specifications General Functi ons • Bus Interface: PIC MG 2.0 Compliant • ISA Driving Capacity : Built-in Address/Data buffer supports dri ving capaci ty up to 64mA • CPU: Supports Intel FCPGA/FCPGA2 Pentium III / Celer on processor up to 1GHz or above ( with sy stem bus f requenci es of 66/100/1[...]

User’s Manual 4 ECB-865 Us er’s Manual • Interrupt: 15 interrupt lev e ls ( 8259 equiv alent) • Hardwa re Status Monitoring: Monitor ing sy stem temperature, v oltage, and cooling fan status. Auto throttli ng control w hen CPU ov erheats • Powe r Management: Supports ATX pow er supply . Supports PC98, LAN w ake up and modem ring -in funct[...]

ECB-865 ECB-865 Us er’s Manual 5 Mechanical and Environmental • Powe r Supply Voltage: +5V (4.75V to 5.25V) , +12V (11.4V to 12.6V), and - 12V (- 11.4V to -12.6V) • Ty pical Powe r Requirement: +5V @ 6.5A, +12V @ 140mA, - 12V @ 30mA w/ Intel Celer on 466MHz CPU and 128MB SDR AM • Operating Temperature: 32 to 140 °F (0 to 60 °C) • Board [...]

User’s Manual 6 ECB-865 Us er’s Manual 2.3 A rchitecture Overv iew The following block diagr am shows the archi tecture and main components of ECB-865. Two maj or chipsets on board are the 82815E Gr aph Memory Control Hub and 82801BA ICH2. These two devices provi de interface to Socket370 processor, supports CR T display, SDRAM w ith ECC, PCI b[...]

ECB-865 ECB-865 Us er’s Manual 7 2.3.1 82815 GMCH and 82801BA The Intel ® 815 chipset for use with the universal socket 370 is a hig h-flexibility chipset designed to ex tend from the basic gr aphics/multimedia PC pl atform up to the mainstream performance desktop platform. The chipset consists of the Intel_ 82815 Graphics and Memory Controller [...]

User’s Manual 8 ECB-865 Us er’s Manual 2.3.2 DRA M Interface The GMCH integ rates a system memor y controll er that supports a 64-bit 100/133 M Hz SDRAM ar ray. The only DRAM ty pe supported is i ndustry standard Sy nchronous DRAM (SDRAM ). The SDRAM control ler interface is fully conf igur able through a set of control register s. The DRAM con[...]

ECB-865 ECB-865 Us er’s Manual 9 2.3.4 PCI Interface The ICH2 PCI interface prov ides a 33 MHz , Rev. 2.2 compliant implementati on. All PCI signals ar e 5V tolerant, ex cept PME#. The ICH2 integr ates a PCI arbiter that suppor ts up to six ex ternal PCI bus master s in addition to the inter nal ICH2 req uests. 2.3.5 IDE Interface (Bus Master Cap[...]

User’s Manual 10 ECB-865 User ’s Manual 2.3.7.2 Intel 82559 The Ethernet inter face is based on an Intel 82559 Ethernet controll er that supports both 10BASE-T and 100BASE- TX. The 82559 consists of both the Media Access Control ler (MAC) and the physical l ayer (PH Y) inter face combined into a single component sol ution. The 32-bit PCI contro[...]

ECB-865 ECB-865 Us er’s Manual 11 3. Hardw ar e Configuration This chapter expl ains you the i nstructions of how to set up y our system. The additional information show s y ou how to instal l M-Sy stems’ Di skOnChip and prog ram the W atchdog Timer . 3.1 Installation Procedure 1. Turn off the power supply . 2. Insert the DIMM module (be carefu[...]

User’s Manual 12 ECB-865 User ’s Manual 3.3 Socket 370 Processor 3.3.1 Installing Celeron / Pentium III (Coppermine/Tualatin) CPU  Lift the handling lev er of CPU socket outw ards and upwards to the other end.  Align the pr ocessor pins w ith pin holes on the socket. Make sur e that the notched corner or dot mar k (pin 1) of the CPU cor r[...]

ECB-865 ECB-865 Us er’s Manual 13 3.5 M-Sy stems’ DiskOnChip Flash Disk ECB-865 r eserves a 32-pin DIP socket to suppor t M-Sy stems’ DiskOnChi p flash disk up to 288 MB. The DiskOnChip is based on pure ISA bus and wi thout PnP (Plug and Pl ay) function. Before the installation, make sure that the DiskOnChi p I/O address jumper is set properl[...]

User’s Manual 14 ECB-865 User ’s Manual 3.7.1 815E integrated Graphics Controller The on-board graphi cs controller i ntegrated in 815E(G MCH) chi pset that integrates hig h performance memory technol ogy for the graphics frame buffer. 32 –bit data interface,133 Mhz SDRAM interface only.Flexible AGP in-line Memory Module (AIMM) implementation[...]

ECB-865 ECB-865 Us er’s Manual 15 3.7.2 Intel 82559(or REA LTEK RTL8139C) & 82801BA (ICH2) + 82562ET (PHY ) Netw ork Controller The 82559 (or RTL8139C) and IC H2+PHY is fully integrated 10BASE- T/100BASE-TX LAN solution. The 32-bit PC I controller pr ovides enhanced scatter -gather bus master ing capabilities and enables the 8139C to perform [...]

User’s Manual 16 ECB-865 User ’s Manual 3.8 Watchdog Timer Programming W hen the W atch- D og T imer ( WDT ) function is enabled, a system reset w ill be generated unless an applicati on trigg ers the timer periodicall y w ithin time-out per iod. This allow s the system to restar t in an orderly way in case of any abnor mal condition is found. [...]

ECB-865 ECB-865 Us er’s Manual 17 3.9 Jumper & Connector 3.9.1 Jumper & Connector Lay out[...]

User’s Manual 18 ECB-865 User ’s Manual 3.9.2 Jumper & Connector List Connectors on the board are linked to ex ternal devices such as hard di sk driv es, keyboard, mouse, or floppy dr ives. In additi on, the board has a number of jumpers that allow you to configure y our system to sui t your appli cation. The following tables list the funct[...]

ECB-865 ECB-865 Us er’s Manual 19 Connectors Label Function Note J1 System reset connector 2 x 1 header, pitch 2.54mm J2 External speaker connector 4 x 1 header, pi tch 2.54mm J3 Key board lock and pow er indicator connector 4 x 1 header, pi tch 2.54mm J4 Primar y IDE / Secondary IDE active indicator connector 2 x 1 header, pi tch 2.54mm J5 Pri m[...]

User’s Manual 20 ECB-865 User ’s Manual 3.10 Setting Jumpers You can configure your board to match the needs of your appli cation by setti ng jumpers. A jumper is the si mplest kind of electric sw itch. It consists of two metal pins and a small metal cl ip (often protected by a plasti c cover) that slides ov er the pins to connect them. To “c[...]

ECB-865 ECB-865 Us er’s Manual 21 3.10.1 Clear CMOS (JP9) You can use JP9 to clear the C MOS data if necessary. To reset the CM OS data, short JP1 for just a few seconds, and then remov e the jumper back to open. Clear CMOS (JP1) Protect* Clear CM OS * default 3.10.2 Watchdog Timer 3.10.2.1 Enable / Disable Onboard Watchdog Timer (JP12) You can u[...]

User’s Manual 22 ECB-865 User ’s Manual 3.10.2.3 Watchdog Timer Time-Out Interval Select (JP10) You can set JP10 to select the W atchdog timer time- out interval to be 0.5, 1, 2, 4, 8, 16, 32, or 64 Sec. W atchdog Timer Tim-Out Interv al Select (JP10) 0.5 Sec. 1 Sec. * 2 Sec. 4 Sec. 8 Sec. 16 Sec. 32 Sec. 64 Sec. * default 3.10.3 COM2 RS-232/42[...]

ECB-865 ECB-865 Us er’s Manual 23 3.10.4 M-Sy stems DiskOnChip Memory A ddress Select (JP11) The M-sy stems DiskOnChip memor y address can be sel ected by JP11. The choice i s D0000~D1FFF, D2000~D3FFF, D4000~D5FFF, D6000~ D7FFF. M-sy stems DiskOnChi p Memory Addr ess Select (JP11) D0000* D2000 D4000 D 6000 * default 3.10.5 Proprietary PCI Bus Mas[...]

User’s Manual 24 ECB-865 User ’s Manual 3.11 Connector Definitions 3.11.1 System Reset Connector (J1) Signal PIN Reset 1 GND 2 3.11.2 External Speaker Connector (J2) Signal PIN SPK 1 NC 2 GND 3 VCC 4 3.11.3 Key board Lock & Pow e r Indicator Connector (J3) Signal PIN VCC 1 NC 2 GND 3 Key board Inhibit 4 GND 5 3.11.4 Primary IDE / Secondary [...]

ECB-865 ECB-865 Us er’s Manual 25 3.11.5 Primary ID E Connector (J5) Signal PIN Signal RESET# 1 2 GND PDD7 3 4 PDD8 PDD6 5 6 PDD9 PDD5 7 8 PDD10 PDD4 9 10 PDD11 PDD3 11 12 PDD12 PDD2 13 14 PDD13 PDD1 15 16 PDD14 PDD0 17 18 PDD15 GND 19 20 NC PDDREQ 21 22 GND PDIOW # 23 24 GND PDIOR# 25 26 GND PDIORDY 27 28 GND PDDACK# 29 30 GND IRQ14 31 32 NC PDA[...]

User’s Manual 26 ECB-865 User ’s Manual 3.11.6 Secondary IDE Connector (J10) Signal PIN Signal RESET# 1 2 GND SDD7 3 4 SDD8 SDD6 5 6 SDD9 SDD5 7 8 SDD10 SDD4 9 10 SDD11 SDD3 11 12 SDD12 SDD2 13 14 SDD13 SDD1 15 16 SDD14 SDD0 17 18 SDD15 GND 19 20 NC SDDREQ 21 22 GND SDIOW # 23 24 GND SDIOR# 25 26 GND SDIORDY 27 28 GND SDDACK# 29 30 GND IRQ15 31[...]

ECB-865 ECB-865 Us er’s Manual 27 3.11.7 Signal Description – Primary & Secondary IDE Connector (J5 & J10) PDA [2:0] Primary Disk A dd ress [2:0]. Thes e signals indicate which byte in either the ATA com m and block or control block is being addres sed. If the IDE signals ar e configured f or Prim ary and Secondary, these signals are co[...]

User’s Manual 28 ECB-865 User ’s Manual PDIOR# Primary Disk IO Read. In norm al IDE this is the com m and to the IDE device that it may drive data onto the PDD [15:0] lines. Data is latched by PIIX4 on the negation edge of PDIOR#. T he IDE device is s elected either by the ATA register f ile chip selects (PDCS1#, PDCS3#) and the PDA [2:0] lines[...]

ECB-865 ECB-865 Us er’s Manual 29 PDIORDY Primary IO Channel Ready. In normal IDE m ode, this input signal is dir ectly driven by the corres ponding IDE device IORDY signal. In an Ultra DMA/33 read cycle, this signal is used as STROBE, with the PIIX4 latc hing data on rising and falling edges of STRO BE. In an Ultra DMA/33 write cycle, this signa[...]

User’s Manual 30 ECB-865 User ’s Manual SDDACK# S econdary DMA A cknowledge. T his signal direct ly dr ives the IDE device DMACK# signal. It is asser ted by PIIX4 to indicate to IDE DMA s lave devices that a given data transf er cycle (asser tion of SDIOR# or SDIO W #) is a DMA data tr ansfer c y c le. This signal is used in conjunction with th[...]

ECB-865 ECB-865 Us er’s Manual 31 3.11.8 Floppy Connector (J6) Signal PIN Signal GND 1 2 DRVDEN0# GND 3 4 NC GND 5 6 DRVDEN1# GND 7 8 INDEX# GND 9 10 MOA# GND 11 12 DSB# GND 13 14 DSA# GND 15 16 MOB# GND 17 18 DIR# GND 19 20 ST EP# GND 21 22 WD # GND 23 24 WE # GND 25 26 TRAK0# GND 27 28 WP T # GND 29 30 RDAT A# GND 31 32 SIDE1# GND 33 34 DSKCHG#[...]

User’s Manual 32 ECB-865 User ’s Manual 3.11.9 Signal Description – Floppy Connector (J6) RDATA# T he read data input signal from the FDD. W D# W rite data. This logic low open drain writes pre-c ompensation s erial data to the selected FDD. An open drain output. W E# W rite enable. An open drain output. MOA# Motor A On. W hen set to 0, this [...]

ECB-865 ECB-865 Us er’s Manual 33 3.11.10 A TX Power Button Connector (J8) Signal PIN Power Button Control Signal 1 GND 2 3.11.11 Parallel Port Connector (J11) Signal PIN Signal STB# 1 2 AF D# PD0 3 4 ERR# PD1 5 6 INIT# PD2 7 8 SLIN# PD3 9 10 GND PD4 11 12 GND PD5 13 14 GND PD6 15 16 GND PD7 17 18 GND ACK# 19 20 GND BUSY 21 22 GND PE 23 24 GND SL[...]

User’s Manual 34 ECB-865 User ’s Manual 3.11.12 DB25 Parallel Port Connector ( J11) Signal PIN Signal STB# 1 14 AFD# PD0 2 15 ERR# PD1 3 16 INIT# PD2 4 17 SLIN# PD3 5 18 GND PD4 6 19 GND PD5 7 20 GND PD6 8 21 GND PD7 9 22 GND ACK# 10 23 GND BUSY 11 24 GND PE 12 25 GND SLCT 13[...]

ECB-865 ECB-865 Us er’s Manual 35 3.11.13 Signal Description – Parallel Port Connector (J11) The following signal descr iption cover s the signal definiti ons, when the parall el port is operated in standard centr onic mode. The parallel por t controller also supports the fast EPP and ECP modes. Please refer to reference 2 for further i nformat[...]

User’s Manual 36 ECB-865 User ’s Manual 3.11.15 Serial Port 1 / Serial Port 2 with External DB9 Connector (J9, J12) Signal PIN Signal GND 5 9 RI DTR 4 8 CTS TxD 3 7 RTS RxD 2 6 DSR DCD 1 3.11.16 Signal Description – Serial Port 1 / Serial Port 2 in RS- 232 Mode (J9, J12) Tx D Serial output. This signal sends ser ial data to the comm unication[...]

ECB-865 ECB-865 Us er’s Manual 37 3.11.17 Box Header Serial Port 1 / Serial Port 2 Connect or in RS-422 (J9, J12) Signal PIN Signal NC 10 9 RI CTS 8 7 RT S DSR 6 5 GND TxD+ 4 3 TxD- RxD- 2 1 RxD+ 3.11.18 Signal Description – Serial Port 1 / Serial Port 2 in RS- 422 Mode (J9, J12) Tx D +/- Serial output. This differ ential signal pair sends ser [...]

User’s Manual 38 ECB-865 User ’s Manual 3.11.20 Signal Description – Serial Port 1 / Serial Port 2 in RS- 485 Mode (J9, J12) RxD/T xD +/- Bi-directional data signal pair . Received data is available in Serial Por t 2 Receiver Buff er Register. Data is transf erred fr om Serial Por t 2 Transm it Buff er Register to the com m unication line, if[...]

ECB-865 ECB-865 Us er’s Manual 39 3.11.21 USB Connector (J13, J19) Signal PIN CH2 CH1 Signal NC 9 10 VCC2 GND 7 8 D2- D1+ 5 6 D2+ D1- 3 4 GND VCC1 1 2 NC 3.11.22 Signal Description – USB Connector (J13, J19) D1+ / D1- Dif ferential bi-dir ectional data signal for USB c hannel 0. Clock is transm itted along with the data using NRZI encoding. T h[...]

User’s Manual 40 ECB-865 User ’s Manual 3.11.25 Signal Configuration – Fast & Standard IrD A Connector (J15) IRRX Infrared Rec eiver input IRTX Inf rared T ransmitter output 3.11.26 A TX Power Controller (J16) Signal PIN Power Good 1 5V Stand-by 2 Power On 3 GND 4 3.11.27 Smart Card Interface (J17) Signal PIN CH2 CH1 Signal NC 13 14 NC GN[...]

ECB-865 ECB-865 Us er’s Manual 41 3.11.28 10/100 BA SE-Tx Ethernet Connector (J18, J20) Signal PIN TXD+ 1 TXD- 2 RXD+ 3 NC 4 NC 5 RXD- 6 NC 7 NC 8 3.11.29 Signal Description – 10/100Base-Tx Ethernet Connector (J18, J20) TX D+ / TXD- Ethernet 10/100Base-Tx differential tr ansmitter outputs. RXD+ / RXD- Ethernet 10/100Base-Tx differ ential receiv[...]

User’s Manual 42 ECB-865 User ’s Manual 3.11.30 CRT Connector (J22) Signal PIN Signal 6 ANA-G ND RED 1 1 1 NC 7 ANA-G ND GREEN 2 1 2 DDCDAT 8 ANA-G ND BLUE 3 1 3 HSYNC 9 VCC NC 4 1 4 VSYNC 10 DIG-GND DIG-GND 5 1 5 DDCCLK 3.11.31 Signal Description – CRT Connector (J22) HSYNC CRT horizontal sy nchronis ation output. VSYNC CRT vertical synchron[...]

ECB-865 ECB-865 Us er’s Manual 43 3.11.32 Internal Key board Connector (J24) Signal PIN KCLK 1 KDAT 2 NC 3 GND 4 VCC 5 3.11.33 PS/2 Key board Connector (J26) Signal PIN Signal NC 6 5 KCLK VCC 4 3 GND NC 2 1 KDAT 3.11.34 Signal Description – Int. & PS/2 Keyboard Connector (J24, J26) KCLK Bi-directional clock signal used to st robe data/com m[...]

User’s Manual 44 ECB-865 User ’s Manual 3.11.37 Proprietary PCI Connector (J21) Signal PIN Signal +12V 1 2 AGND +12V 3 4 AGND VSYNC 5 6 RED GND 7 8 GREEN HSYNC 9 10 BLUE CLK 11 12 GND GND 13 14 PIRQ# REQ# 15 16 GNT# AD31 17 18 RST # AD29 19 20 +3.3V DEVSEL# 21 22 +3.3V AD27 23 24 AD30 AD25 25 26 AD28 C/BE3# 27 28 GND +3.3V 29 30 AD26 +3.3V 31 3[...]

ECB-865 ECB-865 Us er’s Manual 45 3.11.38 Signal Description – Proprietary PCI Connector (J21) 3.11.38.1 A ddress & Data AD [31::00] Address and Dat a are multiplexed on the sam e PCI pins. A bus transaction consist s of an addr ess phase followed by one or more data phases. PCI suppor ts both read and write bursts. The address phase is the[...]

User’s Manual 46 ECB-865 User ’s Manual 3.11.38.2 Sy stem CLK Clock pr ovides timing for all transactions on PCI and is an input to every PCI device. All other PCI sig nals, except RST #, INTA #, INTB #, INTC #, and INTD #, are sampled on the rising edg e of CLK and all other timing par ameters are def ined with respect to this edge. PCI operat[...]

ECB-865 ECB-865 Us er’s Manual 47 3.11.38.3 Interface Control FRAME# Cycle Fr ame is driven by the current mast er to indicate the beg inning and duration of an access. FRA ME# is assert ed to indicate a bus transact ion is beginning. W hile FRA M E# is asserted, dat a transf ers continue. W hen FRAME# is deasserted, t he transaction is in the f [...]

User’s Manual 48 ECB-865 User ’s Manual 3.11.38.4 A rbitration REQ# Request indicates to the arbit er that this ag ent desires use of the bus. This is a point to point sig nal. Every master has its own REQ# which must be tr i-stated while RST# is asserted. GNT# Grant indicates t o the agent that access to the bus has been grant ed. This is a po[...]

ECB-865 ECB-865 Us er’s Manual 49 3.11.38.6 Interrupts PIRQ# Interrupt s on PCI are optional and def ined as "level sensitive," asserted low (negat ive true), using open drain output dr ivers. The assertion and deasser tion of I NT x# is asynchronous to CLK . A device asserts its INTx# line w hen request ing attent ion from its device d[...]

User’s Manual 50 ECB-865 User ’s Manual 4. AMI BIOS Setup ECB-865 is eq uipped with the AM I BIOS stored in Flash ROM . This BIOS has a built-i n Setup progr am that allow user s to modify the basic sy stem configuration easil y. This type of information is stored in CM OS RAM so that it is retained during power- off periods. 4.1 Entering Setup[...]

ECB-865 ECB-865 Us er’s Manual 51 4.2 A MI BIOS Setup Main Menu Once you enter ECB-865 AMI BIOS COMS Setup Utility , the Main Menu “Standard CMOS Setup” will appear on the screen. The Main Menu allow s you to select from eleven Setup functions and two ex it choices. Use arr ow key s to switch the i tems and press <Enter> key to accept o[...]

User’s Manual 52 ECB-865 User ’s Manual 4.3 CMOS Setup Reference Table This Setup reference table includes all the Optimal , Failsafe, and other options setting in each BIOS setup item. It is v ery easy to take a look for crossing r eference. If you want to go details, y ou can directly refer to item descri ption in sub-section. 4.3.1 Standard [...]

ECB-865 ECB-865 Us er’s Manual 53 4.3.1.3 Master Disk, Slav e Disk Select the appropri ate values to configur e the hard disk ty pe you are using for the master and the slave. Av ailable types are 1~ 4 6, US ER, AUT O, No t Installe d, and CDRO M. The settings hav e not been preinstall ed. 4.3.1.4 Boot Sector Virus Protection Enabling this option[...]

User’s Manual 54 ECB-865 User ’s Manual 4.3.2 A dvanced C MOS Setup Defaults This Setup i ncludes all of the adv anced features in the system. The detail descr iptions are specified as below. 4.3.2.1 Quick Boot Set this option to Enabled to instruct AMIBIOS to boot quickl y w hen the computer is power ed on. Disabled: AMIBIOS tests all system m[...]

ECB-865 ECB-865 Us er’s Manual 55 4.3.2.2 1 st / 2 nd / 3 rd Boot Device These options determine the sequence of boot dri ves (floppy driv e A:, hard disk driv e C:, or CD- ROM driv e) that the AMIBIOS attempts to boot from after AMIBIOS POST completes. 4.3.2.3 Try Ot her Boot Dev ice Set this option to Yes to try other boot devi ce. The settings[...]

User’s Manual 56 ECB-865 User ’s Manual 4.3.2.11 Boot To OS/2 Set this option to Yes to permit AMIBIOS to run wi th IBM OS/2. The settings are Yes or No. The def ault setti ng is No. 4.3.2.12 Sy stem BIOS Cacheable W hen this option is set to Enabled, the contents of the F0000h system memory segment can be read from or w ritten to L2 cache memo[...]

ECB-865 ECB-865 Us er’s Manual 57 4.3.3 A dvanced C hipset Setup Defaults This Setup is very important to keep system’s stability . If you are not technical person, do not attempt to change any parameters. The best way is to choose optimal default setting . 4.3.3.1 CPU Ratio Selection This option prov ides different CPU clock Rati os from 3.0x [...]

User’s Manual 58 ECB-865 User ’s Manual 4.3.3.3 Memory Hole This option allow s the end user to specify the location of a memory hole for memory space requir ement from ISA-bus cards. 4.3.3.4 DRA M Cy cle time (SCL Ks) This option selects the number of SCLKs for an access cycle. 4.3.3.5 CA S# Latency (SC LKs) This option controls the number of [...]

ECB-865 ECB-865 Us er’s Manual 59 4.3.4 Pow er Management Setup Defaults This APM (Adv anced Power Management) determines how much power ener gy setti ng below items to handle system pow er resource can save. The following descriptions w ill specify the definition of each item in detai ls. 4.3.4.1 A CPI A w are O/S This item allows y ou to enable[...]

User’s Manual 60 ECB-865 User ’s Manual 4.3.4.4 Stand by Time Out (Minute) This option speci fies the length of the period of system inactiv ity whil e the computer is in Full-On pow er state bef ore the computer is placed in Standby mode. W hen this length of time expi res, the computer enters Standby Timeout state. In Standby mode, some power[...]

ECB-865 ECB-865 Us er’s Manual 61 4.3.4.10 Pow er Button Function This item is used to handl e soft power on/off regardless of time counting (general ly speaking, it i s 4 sec) if you set it to On/Off . You can easily power on/off sy stem by pressing pow er button (toggle sw itch) directly . This feature is only availabl e on system w ith ATX pow[...]

User’s Manual 62 ECB-865 User ’s Manual 4.3.5 PCI / Plug and Play Setup Defaults This section describes config uring the PCI bus sy stem. PCI (Peripheral Component Interconnect) is a system that allows I/O devi ces to operate at speeds nearing CPU’s when they communicate w ith own speci al components. All of options described i n this section[...]

ECB-865 ECB-865 Us er’s Manual 63 4.3.5.2 Clear NVRA M This option is used to clear NVRAM and check or update ESCD (Ex tended System Configurati on Data) data after system pow er on. Set this option to No that will not clea r NVRAM and the operation of update ESCD is effective i n different ESCD data comparison. If you select the “Yes” settin[...]

User’s Manual 64 ECB-865 User ’s Manual 4.3.6 Peripheral Setup Defaults This section describes I/O r esources assignment for all of on-board per ipheral dev ices. 4.3.6.1 OnBoard FDC This option enables the floppy drive contr oller onboar d. The setting s are Aut o, Enabled, or Disable d. 4.3.6.2 OnBoard Serial Port1 This option enables seri al[...]

ECB-865 ECB-865 Us er’s Manual 65 4.3.6.4 On Board Parallel Port There are four optional i tems Para llel Port Mod e , EPP Versi on , Paralle l Port IRQ , and Parallel Port DMA C hannel used to control on- board parall el port interface w hile user select I/O base address manuall y. The followi ng lists ar e avail able options of on-board paralle[...]

User’s Manual 66 ECB-865 User ’s Manual 4.3.6.4.2 Parallel Port IRQ This option is only val id if the Onboard Parallel Port option is not set to D isabled . This option sets the IRQ used by the parallel por t. 4.3.6.4.3 Parallel Port DMA Channel This option is onl y av ailable i f On Board Parallel Port is set to fixed I/O address and the setti[...]

ECB-865 ECB-865 Us er’s Manual 67 4.3.7 Hardw are Monitor Setup Defaults This setup describes current CPU surface temperature status detected from hardw are monitor sensor. The status showed on screen will include: 4.3.7.1 Warning Temperature BIOS Setup Items Optimal Default Failsafe Default Other Options W arning T em perature 75°C /167°F 75°[...]

User’s Manual 68 ECB-865 User ’s Manual 4.3.7.2 CPU Temperature 4.3.7.3 Sy stem Temperature 4.3.7.4 Pow er Fan 4.3.7.5 Sy stem Fan 4.3.7.6 +Vb bat 4.3.7.7 +5VSB 4.3.7.8 +5.000V 4.3.7.9 +12.000V 4.3.7.10 -12.000V 4.3.7.11 -5.000V 4.4 Flash BIOS Utility Utilize AMI Flash BIOS programming utility to update on-board BIOS f or the f uture new BIOS v[...]

ECB-865 ECB-865 Us er’s Manual 69 5. Driver Inst allation 5.1 Driver Installat ion for Ethernet A dapter 5.1.1 Window s 9x The best way to install the dri ver for the Ethernet contr oller is to use the pl ug and play system of W indows 9x. The following procedures illustrate how the installation can be done. 1. If a dri ver for the Ethernet contr[...]

User’s Manual 70 ECB-865 User ’s Manual • If the ‘ Network adapter s ’ line is present, expand the l ine and remove the PC I Ethernet Adapter. This is done by selecting the line and clicki ng the ‘ Remove ’ button. Before removal of the adapter( s), your screen might l ook like this: • W hen all adapters are remov ed (or none were p[...]

ECB-865 ECB-865 Us er’s Manual 71 4. Click the ‘ Next ’ button to conti nue the driver installation. 5. Specify the location of netw ork adapter and cli ck ‘ Next ’ (see below ).[...]

User’s Manual 72 ECB-865 User ’s Manual 6. Click the ‘ Next ’ button to i nstall the networ k adapter driv er. 7. Click the ‘ Next ’ button.[...]

ECB-865 ECB-865 Us er’s Manual 73 8. Click the ‘ Finish ’ button. 9. To complete the install ation, reboot the computer by clicking the ‘ Yes ’ button in the wi ndow show n below. 10.After the sy stem restar ts, the network adapter should be installed. Pr otocols, clients etc. may now be instal led for the network in use. Further config u[...]

User’s Manual 74 ECB-865 User ’s Manual 5.1.2 Window s NT 4.0 Ethernet Installation A driver f or the Intel 82559 Ethernet controller on boar d is included i n the attached supporting CD-ROM. The dri ver for this adapter is denoted ‘Intel ® PRO Adapter’. This driv er may be i nstalled in tw o way s: • During the install ation process w h[...]

ECB-865 ECB-865 Us er’s Manual 75 2. Double cl ick the ‘ Network ’ icon and click the ‘ Adapters ’ tab on the followi ng w indow. A wi ndow as the one show n below shoul d now appear. 3. Click the ‘ Add... ’ button, and the following wi ndow should appear .[...]

User’s Manual 76 ECB-865 User ’s Manual 4. Click the ‘ Have Disk… ’ button to i nstall the Netw ork adapter dri ver from CD -ROM. A wi ndow as the one show n below shoul d now appear. 5. Locate the path of Network adapter driv er and click the ‘ OK ’ button.[...]

ECB-865 ECB-865 Us er’s Manual 77 6. Select the ‘ Intel® PRO Adapter ’ from the l ist (as show n below) and click the ‘ OK ’ button. The Network adapter driv er should now be installed. 7. After the dr iver installation is complete, Protocols, Serv ices etc. may now be config ured for the network to be used. An example is shown below .[...]

User’s Manual 78 ECB-865 User ’s Manual 8. Click ‘ Close ’ to accept the settings. 9. IP Address, DNS etc. may now be configur ed for the network to be used. Cl ick ‘ OK ’ to accept the settings. 10.To complete the driv er installati on, reboot the computer by cl icking the ‘ Yes ’ button in the wi ndow show n below.[...]

ECB-865 ECB-865 Us er’s Manual 79 5.2 Driver Installat ion for Display Ad apter 5.2.1 Window s 9x The fo llow ing steps will install the display driver fo r the ‘Chips & Technologies 69000 PCI’ display controller. 1. Click the ‘ Start ’ button on the task bar, select ‘ Settings ’ and ‘ C ontrol Panel ’ from the sub-menu. This [...]

User’s Manual 80 ECB-865 User ’s Manual 3. Click the ‘ Advanced… ’ button. This w ill show the following w indow. Click the ‘ C hange… ’ button in the Adapter Type frame to select another driver. Your display will probably have another dr iver then the ‘Standard PCI Graphi cs Adapter (VGA)’ installed at this moment. 4. Click the[...]

ECB-865 ECB-865 Us er’s Manual 81 5. Click the ‘ Next ’ to conti nue the display dr iver i nstallation. 6. Locate the path of Graphics adapter dri ver and cli ck the ‘ Next ’ button.[...]

User’s Manual 82 ECB-865 User ’s Manual 7. T he driv er files will now be read and the display adapter is shown as the followi ng. Click the ‘ Next ’ button to install the di splay dri ver. 8. Click the ‘ Finish ’ button. 9. T o complete the display driver instal lation, reboot the computer by cli cking the ‘ Yes ’ button in the wi [...]

ECB-865 ECB-865 Us er’s Manual 83 10.Further config uration of the display adapter may be made from the ‘ Di splay Properti es ’ wi ndow (follow step 1 above). The ‘ Settings ’ tab all ows y ou to change resol ution, number of colours etc. as show n below.[...]

User’s Manual 84 ECB-865 User ’s Manual 5.2.2 Window s NT 4.0 Display Installation A display driver for W indows NT 4.0 is supplied w ith the system on the Suppor ting CD - ROM. The driver installation may be perf ormed by following steps shown bel ow: 1. Star t the control panel by clicking the ‘ Start ’ button, cli ck ‘ Settings ’ and[...]

ECB-865 ECB-865 Us er’s Manual 85 3. Click the ‘ Displ ay Type… ’ button and the f ollowing window should appear. Click the ‘ Change… ’ button to sel ect another driv er. 4. Click the ‘ Have Disk… ’ button. 5. The director y for the driv ers may now be entered. Ty pe A:W INNT40 as shown below. Insert the ‘ Di splay driver dis[...]

User’s Manual 86 ECB-865 User ’s Manual 6. The display driver should now be listed as shown below. Click ‘ OK ’ to accept. 7. Since this d riv er is not p art of the NT 4.0 package , the following messa ge will be shown. 8. T o proceed the dri ver instal lation, click the ‘ Yes ’ butto n. The d river w ill now be installe d, and the fol[...]

ECB-865 ECB-865 Us er’s Manual 87 11.After the reboot, display resolution etc. may be configured in the ‘ D isplay Properti es ’ wi ndow (opened by followi ng steps 1 and 2 above) . An example i s shown bel ow. 12.Before accepting the new settings by pressing ‘ OK ’ , a test should be performed by clicking the ‘ Test ’ button.[...]

User’s Manual 88 ECB-865 User ’s Manual 6. Measurement Draw ing[...]

ECB-865 ECB-865 Us er’s Manual 89 A ppendi x A : BIOS Revisions BIOS Rev. New Features Bugs/Problems Solved Know n Problems[...]

User’s Manual 90 ECB-865 User ’s Manual A ppendix B: Sy stem Resources Memory Map The following table indicates memory map of ECB-865. The address ranges specify the runtime code leng th. A ddress Range Description Note 00000000h-0009FFFFh Sy stem board extension for ACPI BIOS 000A0000h-000AFFFFh Intel(R) 82815 Graphics Controller 000B0000h-000[...]

ECB-865 ECB-865 Us er’s Manual 91 I/O – Map Certain I/O addr esses are subject to change dur ing boot as PnP managers may relocate devices or functions. The addresses shown in the table ar e typical l ocations. I/O Port Description Note 0000h-000Fh Direc t mem ory access contr oller 0010h-001Fh Motherboar d resources 0020h-0021h Progr amm able [...]

User’s Manual 92 ECB-865 User ’s Manual I/O Port Description Note 03C0h-03DFh Intel(R) 82815 Graphics Controller 03F0h-03F3h Standard Floppy Disk Controller 03F4h-03F5h Standard Floppy Disk Controller 03F6h-03F6h Prim ary Ultra AT A Controller 03F8h-03FFh Com m unications Port (CO M1) 0400h-047Fh Motherboar d resources 0440h-044Fh Motherboard r[...]

ECB-865 ECB-865 Us er’s Manual 93 Interrupt Usage. The onboard Intel 82801BA provi des an ISA compatible interr upt controller w ith functionality as tw o 8259A interrupt controllers . The two controller s are cascaded to provi de 13 external interrupts. The actual interrupt setti ngs depend on the PnP handler, the table below indicates the typic[...]

User’s Manual 94 ECB-865 User ’s Manual DMA -channel Usage The DMA circuitr y i ncorporates the functionality of two 8237 DMA control lers w ith seven progr ammable channels. The controller s are referenced DMA C ontroller 1 for channels 0- 3 and D MA Contr oller 2 for channels 4-7. Channel 4 i s by default used to cascade the tw o contro llers[...]

ECB-865 ECB-865 Us er’s Manual 95 A ppendix C: AMIBIOS Power-On Self T est Every time the system is pow ered on, AMIBIOS executes a pow er-on self test. In case of errors they are r eported in one of tw o way s. If the error occurs before the di splay dev ice is initiali sed, a series of beeps sound. Beep codes indicate that a fatal error has occ[...]

User’s Manual 96 ECB-865 User ’s Manual A PPENDIX D: A M IBIOS POST Check Point List AMIBIOS prov ides all IBM standar d Power On Sel f Te st (POST) routines as w ell as enhanced AMIBIOS POST routines. The POST routines support CPU i nternal diagnosti cs. The POST checkpoint codes are accessible vi a the Manufacturing Test Port (I/O port 80h). [...]

ECB-865 ECB-865 Us er’s Manual 97 Bootblock Recov ery Codes — The bootblock recov ery checkpoint hex codes are lis ted in order of executi on: Code Descriptio n E0 The onboard f loppy controller if available is initialized. Next, beginning the base 512KB m emory test. E1 Initializing the interrupt vector table next. E2 Initializing the DMA and [...]

User’s Manual 98 ECB-865 User ’s Manual Uncompressed Initialization Codes — The fo llow ing runtime checkpoint hex codes are listed in or der of execution. These codes are uncompressed i n F0000h shadow RAM . Code Descriptio n 03 T he NMI is disabled. Next, chec king for a soft reset or a power on condition. 05 T he BIOS stack has been built.[...]

ECB-865 ECB-865 Us er’s Manual 99 Code Descriptio n 2A Bus initialization sy stem , static, output devic es will be done next, if present. 2B Passing control to the video RO M to perform any required configur ation before the video ROM test. 2C T o look f or optional video ROM and give control. 2D T he video ROM has returned c ontrol to BIOS POST[...]

User’s Manual 100 ECB-865 User ’s Manual Code Descriptio n 4B The am ount of m emor y above 1MB has been found and verified. Check ing for a sof t reset and clearing the m emor y below 1MB for the soft reset nex t. If this is a power on situation, going to check point 4Eh next. 4C T he mem ory below 1MB has been cleared via a s oft reset. Clear[...]

ECB-865 ECB-865 Us er’s Manual 101 Code Descriptio n 81 A k ey board reset err or or stuck key was found. Issuing the k eyboard Controller interf ace test com m and next. 82 T he keyboard controller interf ace test com pleted. W r iting the com mand byte and initializing the circular buff er next. 83 Com mand byte written, Global data init done. [...]

User’s Manual 102 ECB-865 User ’s Manual Code Descriptio n 9A Return after s etting timer and printer base address. G oing to set the RS-232 base addres s. 9B Returned after s etting the RS-232 base address. Per form ing any required Initialization before the Coproc essor test nex t. 9C Required initialization befor e the Coprocessor test is ov[...]