Intel KEMX-2030 manuale d’uso

I KEM X - 2030 User’s Manua l KEMX-2030 Industrial Motherboard in Mini-ITX form factor with Intel® Atom N270 User’s Guide[...]

II KEM X - 2030 User’s Manua l Contact Info: Quanmax Inc. 4F, No. 415, Ti-Ding Blvd. Sec. 2NeiHu District, Taipei 114Taiwan Tel: +886-2-2799-2789 Fax: +886-2-2799-7399 Visit our site at: www.quanmax.com © 2008 Quanmax Inc. All rights reserved . The information in this user’ s guide is provided for reference o nly. Quanmax does not a ssume any [...]

Content 3 KEM X - 2030 User’s Manua l Content Content ....................................................................................................................... 3 Figures ....................................................................................................................... 5 T ables ..................................[...]

Content 4 KEM X - 2030 User’s Manua l Security Menu ........................................................................................ 49 　 Exit Menu ............................................................................................... 50 Chapter 5 Driver Installa tion ............................................................[...]

Figures 5 KEM X - 2030 User’s Manua l Figures Figure 1 Blo ck Diagram ............................................................................. 18 Figure 2 Mechanica l Dimensio ns ............................................................... 19 Figure 3 Jumper Connec tor ......................................................................[...]

Tables 6 KEM X - 2030 User’s Manua l Tables T able 1 KEMX-2030 S pecification .............................................................. 17 T able 2 Jum per List .................................................................................... 22 T able 3 JP1 Backlight Enable Se lection .................................................. 22[...]

Tables 7 KEM X - 2030 User’s Manua l T able 35 MPCI1, Mi ni-PCI Socket .............................................................. 33 T able 36 PCI1, PCI sl ots ............................................................................ 35 T able 37 A TX1, +12V Po wer Input Connector ............................................ 36 T able 38 P[...]

Safety Instructions 8 KEM X - 2030 User’s Manua l Safety Instructions  Before Y ou Begin Before handling the product, read the instru ctions and safety guidelines on the following pages to prevent damage to the product and to ensure your own personal safety . Refer to the “Advisories” section in the Preface for advis ory conventions used i[...]

Safety Instructions 9 KEM X - 2030 User’s Manua l 3. Follow the guidelin es provided in “Preventing Electrostatic Discharge” on the following page. 4. Disconnect any telephone or telecomm unications lines from the computer . In addition, take note of these sa fety guidelines when appropriate:  T o help avoid possible damage to system board[...]

Safety Instructions 10 KEM X - 2030 User’s Manua l or packaging.  Handle all sensitive components at an ESD workstation. If possible, use antistatic floor p ads and workbench pads.  Handle components and boards with care . Don’t touch the component s or contact s on a board. Hold a board by its edges or by it s metal mounting bracket. [...]

Preface 11 KEM X - 2030 User’s Manua l Preface  How to Use This Guide This guide is designed to be used as step-by-step instructions for installation, and as a reference for operation, troubleshooting, and upgrades. NOTE Driver downloads and additional in formation are available under Downloads on our web site: www .quanmax. com.  Unp ackin[...]

Preface 12 KEM X - 2030 User’s Manua l area (domestic environment) is likely to cause harmful interference, in which case the user will be required to correct the interference (take adequate measures) at their own expense. Changes or modifications not expressly app roved by Quanmax co uld void the user's authority to operate the equipment. N[...]

Preface 13 KEM X - 2030 User’s Manua l date of purchase. T o reduce risk of damage, returns of pr oduct must be in a Quanmax shipping container . If the original container has been lost or damaged, new shipping containers may be obt ained from Quanmax Cu stomer Service at a nominal cost. Quanmax owns all part s removed from repaired products. Qua[...]

Preface 14 KEM X - 2030 User’s Manua l properties as electrical resistance and thermal conductivity . Extreme moisture buildup inside the system can result in electrical shorts, which can cause serious damage to the system. Buildings in which climate is controlled usually maintain an acceptable level of humidity for system equipment. However , if[...]

Preface 15 KEM X - 2030 User’s Manua l Uninterruptible power supply (UPS) systems offer the most complete protection against variations on power because they use battery power to keep the server running when AC power is lost. The battery is charged by the AC power while it is available, so when AC power is los t, the battery can provide power to [...]

Chapter 1 16 KEM X - 2030 User’s Manua l Chapter 1 Introduction  Overview The KEMX-2030 is a Mini-ITX form factor i ndustrial motherboard combining the latest Intel 45nm Intel® Atom™ processor with t he high integr ation of the Intel® 945GSE/ ICH7-M chipset. The new architecture of Atom™ N270 enable the lowest power consumption and small[...]

Chapter 1 17 KEM X - 2030 User’s Manua l  Product S pecifications KEMX-2030` CPU Support Intel® Atom™ N270 Chipset Intel® 945GSE + ICH7-M Memory 1x DDR2 400/533 SO-DIMM Socket, up to 2GB BIOS AMI PnP 8Mb SPI ROM Display Integrated on Intel® 945GSE Chipset 18/24-bit dual-channel LVDS from Chrontel CH7308 18-bit Dual channel LVDS from 945GS[...]

Chapter 1 18 KEM X - 2030 User’s Manua l  System Block Diagram Figure 1 Block Diagram[...]

Chapter 1 19 KEM X - 2030 User’s Manua l  Mechanical Dimensions Figure 2 Mechanical Dimensio ns[...]

Chapter 2 20 KEM X - 2030 User’s Manua l Chapter 2 Hardware Settings  Overview This chapter provides the definitions and locations of jumpers, headers, and connectors. Jumpers The product has several jumpers which mu st be properly configured to ensure correct operation. Figure 3 Jumper Connector For a three-pin jumper (see Figure 3 ), the jum[...]

Chapter 2 21 KEM X - 2030 User’s Manua l  Jumper Settings and Pin Definitions For jumper and connector locations, please refer to the diagrams below . J1 CN10 CN1 CN9 USB2 AUDIO1 JP4 MPCI 1 CN3 CN1 1 SA T A 2 S A TA 1 FP1 FP2 IDE1 L VDS1 CN2 LPT1 JP2 JP1 JP3 PCI 1 PCIE 1 COM2 DIMM1 COM3 COM4 USB4 USB3 CN4 CN5 CN6 CN7 CN8 JP9 ATX1 JP8 JP5 JP6 J[...]

Chapter 2 22 KEM X - 2030 User’s Manua l Jumper Settings T o ensure correct system configuration, t he following section describes how to set the jumpers to enable/disable or change fu nctions. For jumper descriptions, please refer to the table below . T able 2 Jumper List Label Function JP1 Backlight Enable Selection JP2 Backlight & Panel Po[...]

Chapter 2 23 KEM X - 2030 User’s Manua l Table 6 JP4 COM1 Signal / Power Selection Jumper Setting Function 1 1-3 Short Pin 1 of COM1 = +12V 3-5 Short Pin 1 of COM1 = +5V 5-7 Short Pin 1 of COM1 = +5V 7-9 Short Pin 1 of COM1 = DCD@RS232, TX-@RS422, DA T A-@RS485 (Default) 2 2-4 Short Pin 9 of COM1 = +12V 4-6 Short Pin 9 of COM1 = +5V 6-8 Short Pin[...]

Chapter 2 24 KEM X - 2030 User’s Manua l Rear Panel Pin Assignments Figure 5 Rear Panel IO T able 10 Rear Panel Connector List Label Function AUDIO1 3-Port Audio phone jack USB2 USB2.0 Port 2 , 3 T ype A Connector CN9 USB2.0 Port 0, 1 T ype A Connec tor & 10/100 Ethernet RJ-45 Connector CN1 VGA Connector & RS-232(422/ 485) Port A DB-9 Con[...]

Chapter 2 25 KEM X - 2030 User’s Manua l T able 13 CN9, USB2.0 Port 0, 1 Connector & Ethernet RJ-45 Connector Pin Signal Pin Signal 1 MDI[0]+ U1 +5V 2 MDI[0]- U2 USB0- 3 MDI[1]+ U3 USB0+ 4 MDI[1]- U4 GND 5 MDI[2]+ U5 +5V 6 MDI[2]- U6 USB1- 7 MDI[3]+ U7 USB1+ 8 MDI[3]- U8 GND USB*2/RJ45*1+TFM+LED(10/100)22P DIP 90° [UDE RU1-161A1Z1F(XB)] T ab[...]

Chapter 2 26 KEM X - 2030 User’s Manua l T able 15 CN 10, PS/2 KB/MS Connector Pin Signal Function 1 KBDA T Keyboard Data 2 NC No Conn ect 3 GND Ground 4 KB5V +5VSB Power Source 5 KBCLK Keyboard Clock 6 NC No Conn ect 7 MSDA T Mouse Data 8 NC No Conn ect 9 GND Ground 10 KB5V +5VSB Power Source 1 1 MSCLK Mouse Clock 12 NC No Connect MINI DIN DIP 6[...]

Chapter 2 27 KEM X - 2030 User’s Manua l Main Board Pin Assignments T able 17 Internal Connector List Label Function CN2 Panel Backlight W afer CN3 Digital Input / Output Pin Header CN4 Front Panel Audio Pin Header CN5 CD-In Connector Pin Header CN6 SPDIF Pin Header CN7 Audio AMP Right Output W afer CN8 Audio AMP Left Output Wa fer CN1 1 A T Powe[...]

Chapter 2 28 KEM X - 2030 User’s Manua l T able 19 CN3, Digital Input / Output Pin Header Pin Signal Pin Signal 1 Digital Output 0 2 Digital Input 0 3 Digital Output 1 4 Digital Input 1 5 Digital Output 2 6 Digital Input 2 7 Digital Output 3 8 Digital Input 3 9 +5V 10 GND Pitch:2.54mm [YIMTEX 3322*05SAGR(6T] T able 20 CN4, Front Panel Audio Pin H[...]

Chapter 2 29 KEM X - 2030 User’s Manua l T able 23 CN7, Audio AM P Right Output W afer Pin Signal Name 1 S peaker+ 2 S peaker- Pitch=2.0mm W AFER [YIMTEX 503PW1*02STR] T able 24 CN8, Audio AMP Left Output W afer Pin Signal Name 1 S peaker+ 2 S peaker- Pitch=2.0mm W AFER [YIMTEX 503PW1*02STR] T able 25 CN1 1, A T Power Output W afer Pin Signal Nam[...]

Chapter 2 30 KEM X - 2030 User’s Manua l T able 27 FP2, Front Panel 2 Pin Header Pin Signal Pin Signal 1 Power LED + 2 Power Button + 3 NC 4 Power Button - 5 Power LED - 6 NC 7 Keyboard Lock 8 SMBus Data 9 GND 10 SMBus Clock Pitch:2.54mm [YIMTEX 3322*05SAGR(6T] T able 28 L VDS1, L VDS Panel Connector Pin Signal Name Pin Signal Name 1 NC 2 NC 3 L [...]

Chapter 2 31 KEM X - 2030 User’s Manua l T able 29 IDE1, Primary 44-pin IDE Box Header Signal Name Pin Pin Signal Name Reset IDE 1 2 GND IDE Data 7 3 4 IDE Data 8 IDE Data 6 5 6 IDE Data 9 IDE Data 5 7 8 IDE Data 10 IDE Data 4 9 10 IDE Data 1 1 IDE Data 3 1 1 12 IDE Dat a 12 IDE Data 2 13 14 IDE Data 13 IDE Data 1 15 16 IDE Data 14 IDE Data 0 17 [...]

Chapter 2 32 KEM X - 2030 User’s Manua l T able 31 USB3, USB2.0 Port 4, 5 Pin Header Pin Signal Name Pin Signal Name 1 +5V 2 +5V 3 USB4- 4 USB5- 5 USB4+ 6 USB5+ 7 GND 8 GND 9 KEY 10 GND Pitch:2.54mm [YIMTEX 3322*05SAGR(6T) -09] T able 32 USB4, USB2.0 Port 6, 7 Pin Header Pin Signal Name Pin Signal Name 1 +5V 2 +5V 3 USB6- 4 USB7- 5 USB6+ 6 USB7+ [...]

Chapter 2 33 KEM X - 2030 User’s Manua l T able 34 PCIE1 PCIE slots PCIE slot s Pin Side B Side A 1 12V 3.3V 2 12V 3.3V 3 3.3VSB Ground 4 PCIE_W AKE# CLK100_PCIE+ 5 PCI_RST# CLK100_PCIE- 6 Ground Ground 7 PCIE_TXP2 PCIE_RXP2 8 PCIE_TXN2 PCIE_RXN2 9 Ground Ground 10 PCIE_TXP3 PCIE_RXP3 1 1 PCIE_T XN3 PCIE_RXN3 12 Ground Ground 13 Ground Ground 14 [...]

Chapter 2 34 KEM X - 2030 User’s Manua l 33 AD31 34 PME# 35 AD29 36 NC 37 GND 38 AD30 39 AD27 40 +3.3V 41 AD25 42 AD28 43 NC 44 AD26 45 CBE3# 46 AD24 47 AD23 48 IDSEL 49 GND 50 GND 51 AD21 52 AD22 53 AD19 54 AD20 55 GND 56 P AR 57 AD17 58 AD18 59 CBE2# 60 AD16 61 IRDY# 62 GND 63 +3.3V 64 FRAME# 65 NC 66 TRDY# 67 SERR# 68 STOP# 69 GND 70 +3.3V 71 [...]

Chapter 2 35 KEM X - 2030 User’s Manua l T able 36 PCI1, PCI slots 5V Board PCI Revisio n 2.1 Pin Side B Side A Comments 1 -12V TRST_L 32-bit start 2 TCK +12V 3 Ground TMS 4 TDO TDI 5 +5V +5V 6 +5V INT A_L 7 INTB_L INTC_L 8 INTD_L +5V 9 PRSNT1_L Reserved 10 Reserved +5V 1 1 PRSNT2_L Reserved 12 Ground Ground 3.3V key 13 Ground Ground 3.3V key 14 [...]

Chapter 2 36 KEM X - 2030 User’s Manua l 5V Board PCI Revisio n 2.1 Pin Side B Side A Comments 50 KEYW A Y KEYW A Y 5V key 51 KEYW A Y KEYW A Y 5V key 52 AD[08] C/BE[0]_L 53 AD[07] +3.3V 54 +3.3V AD[06] 55 AD[05] AD[04] 56 AD[03] Ground 57 Ground AD[02] 58 AD[01] AD[00] 59 +5V +5V 60 ACK64_L REQ64_L 61 +5V +5V 62 +5V +5V 32-bit end PCI 60*2P 180D[...]

Chapter 3 37 KEM X - 2030 User’s Manua l Chapter 3 System Inst allation  Expansive Interfaces The board comes with one PCIex1 slot , one PCI slot and one Mini-PCI interface. 1x PCIe riser for 3x PCIe x1 32-bit, 33MHz PCI slot 32-bit, 33MHz Mini-PCI socket Figure 6 Expansive Interfa ce s NOTE When adding or removing expansion cards, make sure t[...]

Chapter 3 38 KEM X - 2030 User’s Manua l 3. To make sure the correct DDR2 SO -DIMM notches should match with the DDR2 SO-DIMM. 4. Hold the SO-DIMM with its notch a ligned with the memory socket of the board and insert it at a 30-degree angle into the socket. Figure 7 Align the SO-DIMM Memory Module with the onbo ard socket 5. Fully insert the mod[...]

Chapter 4 39 KEM X - 2030 User’s Manua l Chapter 4 AMI BIOS Setup  Overview This chapter provides a description of the AMI BIOS. The BIOS setup menus and available selections may vary from those of your product. For specific information on the BIOS for your product, please contact Quanmax. NOTE: The BIOS menus and selections fo r your product [...]

Chapter 4 40 KEM X - 2030 User’s Manua l  Main Menu The BIOS Setup is accessed by pressing the DEL key after the Power-On Self-T est (POST) memory test begins and before the operating syst em boot begins. Once you enter the BIOS Setup Utilit y , the Main Menu will appear on the screen. The Main Menu provides System Overview information and all[...]

Chapter 4 41 KEM X - 2030 User’s Manua l LBA/ Large Mode Enables or disables the LBA (Logical Block Addressing)/ Large mode. Setting to Auto enables the LBA mode if the device sup ports this mode, and if the device was not previously formatted with LBA m ode disabled. Options: Disabled, Auto DMA Mode Options: Auto S.M.A.R.T SMART stands for Smart[...]

Chapter 4 42 KEM X - 2030 User’s Manua l T able 43 Onboard I/O Conf iguration BIOS SETUP UTILITY Main Advanced B o o t C h i p s e t P o w e r S e c u r i t y E x i t Onboard I/O Configuration C O M 1 A d d r e s s [ 3 F 8 ] C O M 1 I R Q [ 4 ] COM1 Function T ype [RS232] C O M 2 A d d r e s s [ 2 F 8 ] C O M 2 I R Q [ 4 ] C O M 3 A d d r e s s [[...]

Chapter 4 43 KEM X - 2030 User’s Manua l Options: Normal, EPP, ECP, EPP+ECP Parallel Port IRQ Options: IRQ5, IRQ7 Table 44 OnBoard Peripheral s Configuration Settings BIOS SETUP UTILITY Main Advanced B o o t C h i p s e t P o w e r S e c u r i t y E x i t OnBoard Peripherals Configuration Settings U S B C o n t r o l l e r [ E n a b l e ] USB Dev[...]

Chapter 4 44 KEM X - 2030 User’s Manua l T able 45 T rusted Computing BIOS SETUP UTILITY Main Advanced B o o t C h i p s e t P o w e r S e c u r i t y E x i t Trusted Computing T C G / T P M S U P P O R T [ N O ] Enable/ Disable TPM TCG (TPM 1.1/1.2) supp in BIOS <> Select Screen ↑↓ Select Item +- Change Field Tab Select Field F1 Genera[...]

Chapter 4 45 KEM X - 2030 User’s Manua l  Boot Menu T able 47 Boot Menu BIOS SETUP UTILITY Main A d v a n c e d Boot C h i p s e t P o w e r S e c u r i t y E x i t Boot Settings Q u i c k B o o t [ E n a b l e d ] B o o t u p N u m - L o c k [ O N ] Wait For ’F1’ If E rror [Enabled] Hit ’DEL’Message Display [Enabled] Allow BIOS to Ski[...]

Chapter 4 46 KEM X - 2030 User’s Manua l  Chipset Menu T able 48 Chipset Menu BIOS SETUP UTILITY Main A d v a n c e d B o o t Chipset P o w e r S e c u r i t y E x i t Chipset Settings D R A M F r e q u e n c y [ A u t o ] Boots Graphic Adapter Prio rity [PEG/PCI] Internal Graphics Mode Select [Enabled, 8MB] Hyper Threading Technology [Enabled[...]

Chapter 4 47 KEM X - 2030 User’s Manua l  V ideo Function Configuration T able 49 V ideo Function Configuration BIOS SETUP UTILITY Main A d v a n c e d B o o t Chipset P o w e r S e c u r i t y E x i t Video Func tion Conf iguration DVMT Mode Select [DVMT Mode] D V M T / F I X E D M e m o r y [ 1 2 8 M ] B o o t D i s p l a y D e v i c e [ V G[...]

Chapter 4 48 KEM X - 2030 User’s Manua l  Power Menu T able 50 Power Menu BIOS SETUP UTILITY Main A d v a n c e d B o o t C h i p s e t Pow er S e c u r i t y E x i t Power Management Setting ACPI Function [Enabled] Suspend mode [S3 (STR)] Repost Video on S3 Resume [No] Suspend Time Out [Disabled] R e s t o r e o n A C P o w e r L o s s P o w [...]

Chapter 4 49 KEM X - 2030 User’s Manua l Security Menu T able 51 Security Menu BIOS SETUP UTILITY Main A d v a n c e d B o o t C h i p s e t P o w e r Security E x i t Security Setting Supervisor Password :Not Installed User Password :Not Installed Change Supervisor Passw ord Change User Password Install or Change the password. <> Select Sc[...]

Chapter 4 50 KEM X - 2030 User’s Manua l  Exit Menu T able 52 Exit Menu BIOS SETUP UTILITY Main A d v a n c e d B o o t C h i p s e t P o w e r S e c u r i t y Exit Exit Setting Save Changes and Exit Discard Changes and Exit Discard Changes Load Optimal Defaults Load Failsafe Defaults Exit System Setup after saving the changes. F10 key can be [...]

Chapter 4 51 KEM X - 2030 User’s Manua l Load Failsafe Defaults Load Optimal Default values for all the set up values. This option allows you to load failsafe default values for each of the parameters on the Set up menus, which will provide the most stable performance settings. The F8 key can be used for this operation.[...]

Chapter 5 52 KEM X - 2030 User’s Manua l Chapter 5 Driver Inst allation If your KEMX-2030 does not come with an operat ing system pre-inst alled, you will need to install an operating system and the necessary drivers to operate it. After you have finished assembling your system and connected the appropria te power source, power it up using the po[...]

Appendix A 53 KEM X - 2030 User’s Manua l Appendix A System Resources Interrupt Request (IRQ) Lines IRQ # Used For Comment 0 Timer0 1 keyboard controller 2 Cascade 3 COM2 Note (1) 4 COM1 Note (1) 5 Free 6 Floppy disk controller Note (1) 7 Free 8 Real Time Clock 9 ACPI-Compliant System 10 Free 1 1 COM3&4 Note (1) 12 PS/2 Mouse Note (1) 13 Floa[...]

Appendix A 54 KEM X - 2030 User’s Manua l DMA Channels DMA # Used For Comment 0 Memory Refresh 1 Sound Note (1) 2 Floppy disk controller Note (1) 3 free Unavailable if LPT used in ECP mode. 4 Cascade 5 Sound Note (1) 6 free 7 free Note: If the "Used For" device is disabl ed in setup, the corresponding interrupt is available for other de[...]

Appendix A 55 KEM X - 2030 User’s Manua l 44h – 47h (PS/2) 60h – 64h KeyBoard Controller 90h – 96h PS/2 P OS F0h – FFh Math Co-Processor, X87 Unit 170h – 177h Secondary IDE 1F0h – 1F7h Primary IDE 200h – 22Fh GAME I/O 220h – 22Fh Sound Blaster / AD Lib 279h, A79h Plug and Pl ay Configuration Register A15h, A16h HW Monitor Access P[...]

Appendix B 56 KEM X - 2030 User’s Manua l Appendix B DIO (Digital I/O) KIT User Guide The purpose of this document is to prov ide detail instruction on how to install and utilized the Quanmax DIO Tool on Microsoft Windows XP. W ARNING The program is platform specific. T herefore, do not use the DIO Tool to other platform to prevent adverse effect[...]

Appendix B 57 KEM X - 2030 User’s Manua l As the .NET Framework 2.0 is a pr erequisite, the installation program will prompt to install .NET Framework insta llation first should the .NET Framework 2.0 is not installed. The .NET Framework 2.0 installation w ould take a couple minutes to finish. Click “Next” to agree to st art installation prog[...]

Appendix B 58 KEM X - 2030 User’s Manua l After enter the path where you wish to install the DIO Test Package, Click “Next” to agree to continue the installation process Click “Next” to agree all setting m ade and start installation process After the installation process is comp lete, click “Close” to close down the installation progr[...]

Appendix B 59 KEM X - 2030 User’s Manua l How to run the test program: Click on “Start”->”All Programs”->”Quanmax DIO Tool”->”DIO TOOL” to start the DIO test program The test tool is launch. All output will be set to low as def ault value when program initialized. Click on “Switch Output” button can switch the corresp[...]

Appendix B 60 KEM X - 2030 User’s Manua l How to uninstall the test program: From Control Panel, select the “Add or Remove Program”. Select the “Quanmax DIO Tool”, click on “Remove” button to start the uninstall process Click on “Yes” button to confirm the removal of the DIO Tool Kit.[...]