Intel XP-P41533E manuale d’uso

M - 040 6 0 2 XP-P4I533E Intel ® Pentium ® 4 Processor Motherboard User's Manual[...]

Motherboard XP-P4I533E May 18, 2004 May 18, 2004 XP-P4I533E Motherboard Copyright Declaration © 2004 Gigatrend Technology Co., Ltd. All rights reserved. No part of this manual may be reproduced, copied, translated, or transmitted in any form or by any means without express permission from Gigatrend Technology. Companies and product names mentioned[...]

Contents Motherboard Layout ........................................................................ 4 1. Production Introduction ............................................................... 5 1.1. Feature Summary ............................................................................. 5 1.2. I/O Back Panel and Connectors&Jumper Setting[...]

4 English Motherboard Layout XP-P4I533E KB_MS COMA ATX_12V CD_IN F_AUDIO F_PANEL BAT Intel ICH4 Intel 845E SOCKET 478 CPU_FAN ATX FDD IDE2 P C I 1 P C I 2 PCI3 DDR1 CODEC SMSC BIOS COMB IDE1 CLR_CMOS F_USB1 PWR_LED USB LAN DDR2 LPT GAME LINE_IN LINE_OUT MIC_IN RTL8100C DDR3 AGP PCI4 PCI5 SYS_FAN[...]

English 5 CPU Socket 478 for Intel ® Pentium ® 4 (Northwood) with HT Technology Intel ® Pentium ® 4 400/533MHz FSB 2nd cache depends on CPU Chipset North Bridge: Intel ® 845 E South Bridge: Intel ® I CH 4 Memory 3 184-pin DDR DIMM sockets, supports up to 3GB DRAM (Max) Supports DDR200/DDR266 DIMM Supports only 2.5V DDR SDRAM Slots 1 AGP slot [...]

6 English PS/2 Keyboard PS/2 Mouse LAN USB COMB Parallel Port COM A Game Port Line Out MIC In 1.2. I/O Back Panel and Connectors&Jumper Setting 1.2.2. Connectors&Jumper Setting FDD (Floppy Disk Drive Connector) The FDD connector is able to connect a single floppy disk drive via a FDD cable. Usually one edge of the FDD cable is marked in red[...]

English 7 CPU_FAN (CPU Fan Power Connector); SYS_FAN (System Fan Power Connector) The CPU_Fan power connector provides the largest amount of power to the CPU fan at 600mA. You can connect the casing fan to the SYS_FAN connector to enhance system cooling. ATX_12V (+12V Power Connector) The ATX_12V power connector provides power to the CPU. If this c[...]

8 English F_AUDIO (Front Audio Connector) Connects to the audio connector located on the front panel of the system casing (dependent on case design). When use of the front panel audio connector is required, please remove the 5-6 pin, 9-10pin jumper. Please note that use of only the front panel audio connector or the rear panel audio connector is pe[...]

English 9 The improper removal of the battery can result in harm. When replacing a battery, please make sure you use one that is of similar brand and model number. For information related to battery specifications and precautions, please refer to the manufacturer instructions. If you wish to delete the data stored in the CMOS, please follow the ste[...]

10 English 3 Position and attach the clips on one end of the fan sink firmly atop the CPU. Please do the same for the clips on the other end of the fan sink. 2 When the CPU is inserted into its position, gently press the metal lever downwards until a click is heard. Then add an even layer of heat sink paste between the CPU and fan sink for heat dis[...]

English 11 2.3. Installation of the Graphics Card 1. Before installing the graphics card, please carefully read the accompanying user manual. As well, make sure the computer power is turned off. 2. When installing or removing the graphics card, first pull out the white AGU knob before insertion or removal. Releasing the AGU knob will hold the graph[...]

12 English[...]

English 13 3. BIOS Setup BIOS (Basic Input and Output System) stores all the information of the motherboard settings that is needed for system initiation within the CMOS. The CMOS SETUP utility allows the user to make changes in BIOS configurations that are required or to activate certain features. The CMOS SETUP saves each item configuration in th[...]

14 English <F6> Gives the list of options available for each item <F7> Return to Optimized default values (not applicable to main setup screen) <F8> Enters Expert-Flash feature <F9> Displays system information <F10> Saves settings and exits setup 3.2. Standard CMOS Features ø Includes the settings for items such as da[...]

English 15 n n n n n Floppy 3 Mode Support Allows user to configure a Japanese standard 3 Mode floppy drive. Options: Disabled (No 3 Mode drive installed) Drive A (3 Mode Drive installed in A:) Drive B (3 Mode Drive installed in B:) Both (3 Mode Drive installed in A: and B:) n n n n n Halt on T ells the BIOS specifically which types of errors will [...]

16 English " # " If the installed CPU is an Intel Pentium 4 CPU supporting Hyper-Threading Technology, the system will automatically provide this option. 3.3. Advanced BIOS Features ø Allows the configuration of advanced settings such as boot sequence, password check, etc. n n n n n First / Second / Third Boot Device The user can select [...]

English 17 3.4. Integrated Peripherals ø This menu allows you to control the various ports of the computer such as IDE, SA T A, USB, IEEE1394, COM port, LPT port, AC97 audio, etc. n n n n n On-Chip Primary PCI IDE Allows the user to enable or disable the first onboard IDE channel. (default:Enabled) n n n n n On-Chip Secondary PCI IDE Allows the us[...]

18 English n n n n n USB Mouse Support Allows user to use a USB-based mouse (Enable if you are using a USB mouse, otherwise Disable) (default:Disabled) n n n n n AC97 Audio Allows the user to use the onboard AC97 audio (default:Auto) n n n n n Onboard H/W LAN Allows the user to enable or disable the onboard LAN (default:Enabled) n n n n n Onboard L[...]

English 19 n n n n n Game Port Address Allows the user to select the Game Port Address Options: 201, 209, Disabled (default:201) n n n n n Midi Port Address Allows the user to select the Midi Port Address Options: 300, 330, 290, Disabled (default:Disabled) n n n n n Midi Port IRQ This feature can be configured when "Midi Port Address" is [...]

English 20 3.5. Power Management Setup ø This is used to control the various power saving features of the PC. n n n n n ACPI Suspend T ype Allows user to select the Advanced Configuration and Power Interface(ACPI) as S1/ POS (Power On Suspend) or S3/STR(Suspend T o RAM) (default:S1/POS) n n n n n Power LED in S1 state Allows user to select the sys[...]

21 English 3.6. PnP/PCI Configuration ø This menu allows you to configure your PCI slots. Y ou can assign IRQ's for various PCI slots. n n n n n PCI 1 / PCI 5 IRQ Assignment Allows you to assign an IRQ for the 1st / 5th PCI slot. Options: Auto,3,4,5,7,9,10,1 1,12,14, 15 (default:Auto) n n n n n PCI 2 IRQ Assignment Allows you to assign an IRQ[...]

English 22 3.7. PC Health Status ø This menu displays the current CPU temperature, the fan speeds, voltages etc. n n n n n Current CPU / SYSTEM T emperature Automatically checks CPU & SYSTEM temperature n n n n n Current Voltage(V) Vcore / +3.3V / +5V / +12V / +1.8V Automatically checks system voltage n n n n n Current CPU / SYSTEM F AN Speed [...]

23 English 3.8. Frequency/V oltage Control ø This allows user to configure CPU frequency and voltage settings. ø This section is very dangerous for inexperienced users, and therefore it is not recom mended that these settings be altered. An incorrect setting can result in system instability , corrupt data, or permanent hardware damage. n n n n n [...]

English 24 n n n n n Fixed PCI/AGP Frequency This feature can be configured when the "CPU Host Frequency" is set to Enabled and allows the user to adjust the PCI/AGP Frequency without af fecting the CPU Frequency . n n n n n Host/DRAM Clock Ratio Allows the user to set the Host/DRAM Clock Ratio. If the FSB(Front Side Bus) is at 400MHz. 2.[...]

25 English 3.9. T op Performance ø "T op Performance" allows faster system start. However, the result may dif fer depending on system specifications (includes hardware and OS). For example, certain hardware may become unstable under Windows XP but work reliably under the Windows NT operating system. Thus, select Disabled under "T op[...]

English 26 4. Driver Installation Driver installation for the Windows 98/98SE/200/ME/XP operating systems is simple. Once you insert the provided driver disks into your optical drive, the AUTORUN screen will appear . If this screen does not appear, you can use "D:setup.exe" (with "D" being the specified drive) to bring up the s[...]