IOGear GMFPSU01 manuale d’uso

User Manual (GMFPSU01) USB Print Server[...]

[...]

3 W elcome Thank you f or purchasing this 1-port USB Pr int Server that allows any network ed computer to share a USB printer. It complies with USB 1.1 specifications, and provides users with an auto-sensing 10/100Base-T por t. It works with either 10BaseT or 100BaseT networks. The b uilt-in web management feature pro vides more conv enience by al[...]

4 T able of Contents P ackage Contents 05 Features 06 System Requirements 07 Introduction 08 Hardware Setup 09 Software Installation 10 Software Configuration 22 Web Administr ation 33 T echnical Support 41 Limited Warr anty 42[...]

5 P ackage Contents This package contains: • 1 USB Multi-Function Print Ser ver • 1 CA T5 patch cable • 1 User manual • 1 Installation CD • 1 Warr anty/registration card • 1 P ower adapter * If any items are damaged or missing, please contact your dealer .[...]

6 Features • Allows multiple users to share a Multi-Function Printer (MFP) ov er the network to Print, Scan, and Fax from any networked computer •Print text documents and color photos without compromising quality •F ax documents ov er the network and at the conv enience of your desk without the clutter •Scan documents or photos in high-reso[...]

7 System Requirements This USB print ser ver supports: • Windows 2000/XP • Printer with USB connection[...]

8 Introduction IOGEAR’ s palm-sized USB Multi-Function Print Server allows any netw orked computer to share a USB Multi-Function Printer (MFP). This multi-function server goes a step bey ond ordinary pr int servers by allowing multiple network users to Print, Scan, and F ax using the same Multi-Function Printer . This elimi- nates the need to pur[...]

9 Hard ware Setup Hardware Setup 1) Plug the included power adapter into the print server and a power outlet near the m ultifunction printer. 2) Plug the network por t of the print ser ver into a netw ork switch or av ailable LAN port on a router using standard Ethernet patch cable. 3) Plug the USB cable from y our multifunction printer into the US[...]

10 Software Installation Software Installation (repeat on each networked computer) 1) Inser t the Setup CD into your computer . 2) Click the Installation b utton on the window that opens.[...]

11 Software Installation 3) Choose a language to use for installation and clic k OK.[...]

12 Software Installation 4) Click Next at the first screen of the setup wizard.[...]

13 Software Installation 5) Choose a folder to install the print server software or just clic k Next.[...]

14 Software Installation 6) Choose a folder in the start menu to launch the software from or just click Ne xt.[...]

15 Software Installation 7) On Windows XP , a windo w may come up w arning you that this software has not been tested by Microsoft and certified by their Windows Logo program. If so, simply clic k Continue Anywa y to continue with installation.[...]

16 Software Installation 8) When the installation is complete, click OK.[...]

17 Software Installation 9) If you would lik e the print ser ver softw are to run automatically when star ting your computer (recom mended), leav e the box chec ked and clic k Finish.[...]

18 Software Installation On Windows XP systems, the F ound New Hardw are wizard may pop up during installation. Y ou will need to do the follo wing to complete the driver installation: 1) If asked if Windows can connect to the internet to search for softw are, clic k the No, not this time option and then click Next.[...]

19 Software Installation 2) When asked how the wizard should install softw are, lea ve Install the software automatically selected and click Next.[...]

20 Software Installation 3) If you see another warning that the software has not been Windows Logo certified by Microsoft, click Continue Anywa y .[...]

21 Software Installation 4) Click Finish to complete the F ound New Hardw are wizard.[...]

22 Software Configuration Software Configuration (repeat on each networked computer) 1) Launch the IOGear MFP Utility program from the start menu or icon on the desktop.[...]

23 Software Configuration 2) If you ha ve Windows XP and the Windo ws Firewall is enab led you will see this windo w pop up when the Utility is first launched. Make sure y ou click the Unb lock button to allo w communication with the print ser ver . Other softw are firewalls ma y displa y similar options – make sure the print server software i[...]

24 Software Configuration 3) The Utility will search your network f or the print ser ver and displa y it in the window . If no print ser ver is found please mak e sure any third party firewalls such as Norton Inter net Security , McAfee P ersonal Firew all, or ZoneAlarm have been disabled or b ypassed and click the Sear ch button to try again.[...]

25 Software Configuration 4) If your printer software has already been installed, skip ahead to step 7. Otherwise, once the print server has been found, close the windo w with the X button in the top right corner ( NOT the one labeled Exit ) to hide the Utility for no w .[...]

26 Software Configuration 5) Install the software that came with your printer . When the drivers f or the printer hav e finished installing OR the software asks you to plug in the printer using a USB cab le, you are ready to “connect” the device .[...]

27 Software Configuration 6) Y ou should see a small USB icon like this in the tra y in the lower right corner of your screen. Double-clic k on the icon to open the Utility window again.[...]

28 Software Configuration 7) Click the plus in front of the print server name to show the name of the attached printer . Then select the printer name and click the Connect button in the Utility .[...]

29 Software Configuration 8) The printer should be detected as if it was plugged directly into the computer . Finish any remaining setup needed by the printer software. Y our multifunction printer should be ready to use.[...]

30 Software Configuration 9) If you would lik e the connection to this printer to be restored automatically when the Utility software launches, you will need to add the de vice to y our fa vorites list. Clic k the plus in front of Connected devices and right-click the name of the printer . Choose Add to fa vorites from the men u that pops up.[...]

31 Software Configuration 10) Click OK to confirm that the printer is in your fa vorites list.[...]

32 Software Configuration 11) Once you hav e connected to the print server you can close the Utility window . Be sure to use the close box with an X in the top right corner so that the Utility continues to run in the background. The large button labeled Exit will shut down the Utility and disconnect y our computer from the printer .[...]

33 W eb Administration Web Administration (ad vanced options) Normally you will not need to change the name or IP address used by the print server . How ev er , if you hav e multiple print servers or want to ov erride these default settings f or another reason, you ma y do so using the Web Administration tool. This tool ma y also be used to upgr ad[...]

34 W eb Administration Changing the print server name The default name ma y not be conv enient if you ha ve m ultiple print ser vers . If you w ould like to change the print ser ver’ s name to something more meaningful such as “F ront Office” or “Accounting Scanner” you can do so with the W eb Admin tool. First click the Setup b utton, t[...]

35 W eb Administration Protecting the Admin tool with a passw ord If you would lik e to prev ent unauthorized access to the Admin tool, you can estab lish a pass word from the same System tab of the Setup section shown abov e. T ype in your passw ord twice to confirm it, then click Sa ve & Restart. When the server reboots , and for all future [...]

36 W eb Administration Changing the IP address Normally the ser ver requests an IP address automatically from y our router or other DHCP server on the network. If you w ould prefer to specify an address , you can do so by clic king the Setup button, then on the TCP/IP tab . Make sure the network settings you enter are v alid, or the print server ma[...]

37 W eb Administration Restoring factory default settings If you would lik e to restore all settings on the print ser ver to their original configuration and can still access the Web Admin tool, simply clic k on the Misc button and mak e sure the Factory Default tab is selected. Clicking OK will immediately reset all options to their def aults and[...]

38 W eb Administration Upgrading the firmware In some cases, a firmware upgrade ma y be necessary to get the full functionality of your MFP device , especially if you ha ve a brand ne w model. If y ou are experiencing any compatibility issues please check the Support section of the IOGEAR website at http://www.iogear .com for firmware upgrade ?[...]

39 W eb Administration Click the Br owse button and y ou will be asked to locate the firmware upgrade file y ou just downloaded. Select it and click Open.[...]

40 W eb Administration Y ou will see the location you selected in the box ne xt to the Br owse button. Click the button at the bottom labeled Firmware Upgrade to load the new firmware onto the server .[...]

41 If you need technical support, please check out our IOGEAR T ech Info Library (T .I.L.) at www .iogear .com/support for the latest tips, tricks , and troubleshooting. The IOGEAR T .I.L. was designed to provide y ou with the latest technical information about our products. Most of the answers to your ques- tions can be found here , so please try [...]

42 Limited W arranty IN NO EVENT SHALL THE DIRECT VENDOR’S LIABILITY FOR DIRECT , INDIRECT , SPECIAL, INCI- DENT AL OR CONSEQUENTIAL D AMA GES RESUL TING FROM THE USE OF THE PR ODUCT , DISK OR ITS DOCUMENT A TION EXCEED THE PRICE P AID FOR THE PR ODUCT . The direct vendor mak es no warranty or representation, e xpressed, implied, or statutory wit[...]

[...]

Contact Info. Hubble • Irvine, CA 92618 • (P) 949.453.8782 • (F) 949.453.8785 • www .iogear .com[...]