Jeep Grand Cherokee (2013) manuale d’uso

Gr and Cher ok ee Chrysler Group LLC O WNER’S MANU AL 2013 Gr and Cherok ee 13WK741-126-AB Second Edition Printed in U.S.A. 2013 I n f o r m a t i o n P r o v i d e d b y :[...]

VEHICLES SOLD IN CANADA With respect to any V ehicles Sold in Canada, the name Chrysler Gr oup LLC shall be deemed to be deleted and the name Chrysler Canada Inc. used in substitution therefor e. DRIVING AND ALCOHOL Drunken driving is one of the most frequent causes of accidents. Y our driving ability can be seriously impaired with blood alcohol le[...]

T ABLE OF CONTENTS SECTION P AGE 1 INTRODUCTION ............................................................. 3 2 THINGS TO KNOW BEFORE ST AR TING YOUR VEHICLE ............................ 1 1 3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE ............................ 1 1 9 4 UNDERST ANDING YOUR INSTRUMENT P ANEL .................................. [...]

I n f o r m a t i o n P r o v i d e d b y :[...]

INTRODUCTION CONTENTS 䡵 INTRODUCTION ........................ 4 䡵 ROLLOVER W ARNING ................... 5 䡵 HOW TO USE THIS MANUAL .............. 7 䡵 W ARNINGS AND CAUTIONS .............. 9 䡵 VEHICLE IDENTIFICA TION NUMBER ........ 9 䡵 VEHICLE MODIFICA TIONS/AL TERA TIONS . . .10 1 I n f o r m a t i o n P r o v i d e d b y :[...]

INTRODUCTION Congratulations on selecting your new Chrysler Group LLC vehicle. Be assured that it represents precision workmanship, distinctive styling, and high quality - all essentials that are traditional to our vehicles. This is a specialized utility vehicle. It can go places and perform tasks that conventional passenger cars are not intended. [...]

read these publications carefully . Following the instruc- tions and recommendations in this manual will help assure safe and enjoyable operation of your vehicle. NOTE: After reviewing the owner information, it should be stored in the vehicle for convenient referenc- ing and remain with the vehicle when sold. When it comes to service, r emember tha[...]

Do not attempt sharp turns, abrupt maneuvers, or other unsafe driving actions that can cause loss of vehicle control. Failure to operate this vehicle safely may result in a collision, rollover of the vehicle, and severe or fatal injury . Drive carefully . Failure to use the driver and passenger seat belts pr o- vided is a major cause of sever e or [...]

HOW TO USE THIS MANUAL Consult the T able of Contents to determine which section contains the information you desire. Since the specification of your vehicle depends on the items of equipment order ed, certain descriptions and illustrations may differ from your vehicle’s equipment. The detailed index at the back of this Owner’s Manual contains [...]

8 INTRODUCTION I n f o r m a t i o n P r o v i d e d b y :[...]

W ARNINGS AND CAUTIONS This Owners Manual contains W ARNINGS against oper- ating procedures that could result in a collision or bodily injury . It also contains CAUTIONS against procedures that could result in damage to your vehicle. If you do not read this entire Owners Manual, you may miss important information. Observe all W arnings and Cautions[...]

NOTE: It is illegal to remove or alter the VIN. VEHICLE MODIFICA TIONS/AL TERA TIONS W ARNING! Any modifications or alterations to this vehicle could seriously af fect its roadworthiness and safety and may lead to a collision resulting in serious injury or death. Right Front Body VIN Location 10 INTRODUCTION I n f o r m a t i o n P r o v i d e d b [...]

THINGS T O KNOW BEFORE ST ARTING YOUR VEHICLE CONTENTS 䡵 A WORD ABOUT YOUR KEYS ............. 1 4 ▫ W ireless Ignition Node (WIN) ............. 1 4 ▫ K e y F o b ............................. 1 5 ▫ Removing Key Fob From Ignition .......... 1 6 ▫ Key-In-Ignition Reminder ................ 1 8 䡵 SENTR Y KEY 威 ......................... 1 [...]

▫ Using The Panic Alarm .................. 2 7 ▫ Programming Additional T ransmitters ........ 2 7 ▫ T ransmitter Battery Replacement ........... 2 7 ▫ General Information .................... 2 9 䡵 REMOTE ST ARTING SYSTEM — IF EQUIPPED .......................... 3 0 ▫ How T o Use Remote Start ................ 3 0 䡵 DOOR LOCKS .....[...]

▫ Seat Belt Pretensioners .................. 6 4 ▫ Supplemental Active Head Restraints (AHR) . . .65 ▫ Enhanced Seat Belt Use Reminder System (BeltAlert 威 ) .......................... 6 9 ▫ Seat Belt Lock Out ...................... 7 0 ▫ Seat Belts And Pregnant W omen ........... 7 0 ▫ Seat Belt Extender ..................... 7 1 ▫ [...]

A WORD ABOUT YOUR KEYS Y our vehicle uses a keyless ignition system. This system consists of a Key Fob with Remote Keyless Entry (RKE) transmitter and a W ireless Ignition Node (WIN) with integral ignition switch. Y ou can insert the Key Fob into the ignition switch with either side up. Keyless Enter-N-Go™ Feature This vehicle is equipped with th[...]

Key Fob The Key Fob operates the ignition switch. Insert the square end of the key fob into the ignition switch located on the instrument panel and rotate to the desired posi- tion. It also contains the Remote Keyless Entry (RKE) transmitter and an emergency key , which stor es in the rear of the Key Fob. The emergency key allows for entry into the[...]

T o remove the emergency key , slide the mechanical latch at the top of the Key Fob sideways with your thumb and then pull the key out with your other hand. NOTE: Y ou can insert the double-sided emergency key into the lock cylinders with either side up. Removing Key Fob From Ignition Place the shift lever in P ARK. T urn the Key Fob to the OFF pos[...]

• The power window switches, radio, power sunroof (if equipped), and power outlets will remain active for up to 10 minutes after the ignition switch is turned to the OFF position. Opening either front door will cancel this feature. The time for this featur e is programmable. Refer to “Electronic V ehicle Information Center (EVIC)/Personal Setti[...]

W ARNING! (Continued) • Do not leave the Key Fob in or near the vehicle, or in a location accessible to children, and do not leave Keyless Enter-N-Go™ in the ACC or ON/ RUN mode. A child could operate power windows, other controls, or move the vehicle. • Do not leave children or animals inside parked vehicles in hot weather . Interior heat bu[...]

SENTR Y KEY 姞 The Sentry Key 威 Immobilizer system prevents unauthor- ized vehicle operation by disabling the engine. The system does not need to be armed or activated. Operation is automatic, regardless of whether the vehicle is locked or unlocked. The system uses the factory-mated Key Fob with Remote Keyless Entry (RKE) transmitter and W irele[...]

Replacement Keys NOTE: Only Key Fobs that are programmed to the vehicle electronics can be used to start and operate the vehicle. Once a Key Fob is programmed to a vehicle, it cannot be programmed to any other vehicle. CAUTION! • Always remove the Key Fobs from the vehicle and lock all doors when leaving the vehicle unattended. • For vehicles e[...]

• This device must accept any interference that may be received, including interfer ence that may cause unde- sired operation. VEHICLE SECURITY ALARM — IF EQUIPPED This V ehicle Security Alarm monitors the vehicle doors, liftgate, liftgate flipper glass, and ignition for unauthorized operation. When the alarm is activated, the interior switches[...]

• For vehicles not equipped with Keyless Enter-N-Go™, make sure the vehicle ignition system is ⬙ OFF ⬙ and the key is physically removed from the ignition. 2. Perform one of the following methods to lock the vehicle: • Press LOCK on the interior power door lock switch with the driver and/or passenger door open. • Press the LOCK button o[...]

NOTE: • The driver’s door key cylinder and the liftgate button on the RKE transmitter cannot arm or disarm the V ehicle Security Alarm. • The V ehicle Security Alarm remains armed during power liftgate entry . Pressing the liftgate button will not disarm the V ehicle Security Alarm. If someone enters the vehicle through the liftgate and opens[...]

This feature also turns on the approach lighting in the outside mirrors (if equipped). Refer to “Mirrors” in “Understanding The Features Of Y our V ehicle” for fur- ther information. The lights will fade to off after approximately 30 seconds or they will immediately fade to of f once the ignition switch is turned to ON/RUN from the OFF posi[...]

T o Unlock The Doors Press and release the UNLOCK button on the RKE transmitter once to unlock the driver’s door or twice to unlock all doors. The turn signal lamps will flash to acknowledge the unlock signal. The illuminated entry system will also turn on. Refer to “Keyless Enter-N-Go™” under “Things T o Know Before Starting Y our V ehic[...]

Flash Lamps With Lock This feature will cause the turn signal lamps to flash when the doors ar e locked or unlocked with the RKE transmitter . This feature can be turned on or off. T o change the current setting, refer to “Electronic V ehicle Information Center (EVIC)/Personal Settings (Customer - Programmable Featur es)” in “Understanding Y [...]

Using The Panic Alarm T o turn the Panic Alarm feature on or off, press and hold the P ANIC button on the RKE transmitter for at least one second and release. When the Panic Alarm is on, the headlights turn on, the park lamps will flash, the horn will pulse on and off, and the interior lights will turn on. The Panic Alarm will stay on for three min[...]

1. Remove the emergency key by sliding the mechanical latch at the top of the RKE transmitter sideways with your thumb and then pull the key out with your other hand. 2. Insert the tip of the emergency key or a #2 flat blade screwdriver into the slot and gently pry the two halves of the RKE transmitter apart. Make sure not to damage the seal during[...]

3. Remove and replace the battery . When replacing the battery , match the + sign on the battery to the + sign on the inside of the battery clip, located on the back cover . A void touching the new battery with your fingers. Skin oils may cause battery deterioration. If you touch a battery , clean it with rubbing alcohol. 4. T o assemble the RKE tr[...]

If your RKE transmitter fails to operate from a normal distance, check for these two conditions: 1. A weak battery in the RKE transmitter . The expected life of the battery is a minimum of three years. 2. Closeness to a radio transmitter such as a radio station tower , airport transmitter , and some mobile or CB radios. REMOTE ST ARTING SYSTEM — [...]

• System not disabled from previous r emote start event • V ehicle theft alarm not active • Ignition in Off position for Keyless Enter-N-Go™ vehicle • Fuel level meets minimum requir ement W ARNING! • Do not start or run an engine in a closed garage or confined area. Exhaust gas contains Carbon Mon- oxide (CO) which is odorless and colo[...]

T o Enter Remote Start Mode Press and release the REMOTE ST ART button on the RKE transmitter twice within five sec- onds. The vehicle doors will lock, the parking lights will flash and the horn will chirp twice (if programmed). Then, the engine will start and the vehicle will remain in the Remote Start mode for a 15 minute cycle. NOTE: • If an e[...]

doors and disarm the V ehicle Security Alarm (if equipped). Then, prior to the end of the 15 minute cycle, press and release the ST AR T/STOP button. If the ST AR T/STOP button is not present, insert the Key Fob into the ignition switch and turn the switch to the ON/RUN position. NOTE: • For vehicles not equipped with the Keyless Enter-N- Go™ f[...]

The Remote Start Comfort System can be activated and deactivated through the Electronic V ehicle Information Center (EVIC). For more information on Remote Start Comfort System operation refer to “Electronic V ehicle Information Center (EVIC)/Customer-Pr ogrammable Features (SETUP)” in “Understanding Y our Instrument Panel”. DOOR LOCKS The p[...]

W ARNING! (Continued) • When leaving the vehicle, always remove the Key Fob from the ignition and lock your vehicle. • Never leave children alone in a vehicle, or with access to an unlocked vehicle. • Allowing children to be in a vehicle unattended is dangerous for a number of reasons. A child or others could be seriously or fatally injured. [...]

If a rear door is locked, it cannot be opened from inside the vehicle without first unlocking the door . The door may be unlocked manually by raising the lock knob. Automatic Door Locks — If Equipped When enabled, the door locks will lock automatically when the vehicle’s speed exceeds 15 mph (24 km/h). The auto door lock featur e can be enabled[...]

W ARNING! A void trapping anyone in a vehicle in a collision. Remember that the rear doors can only be opened from the outside when the Child-Protection locks are engaged (locked). Child-Protection Door Lock Location Child-Protection Door Lock Function 2 THINGS T O KNOW BEFORE ST ARTING YOUR VEHICLE 37 I n f o r m a t i o n P r o v i d e d b y :[...]

NOTE: For emergency exit fr om the rear seats when the Child-Protection Door Lock System is engaged, manually raise the door lock knob to the unlocked position, roll down the window , and open the door using the outside door handle. KEYLESS ENTER-N-GO™ The Passive Entry system is an enhancement to the vehicle’s Remote Keyless Entry (RKE) system[...]

NOTE: If “Unlock All Doors 1st Press” is programmed all doors will unlock when you grab hold of the driver ’s front door handle. T o select between “Unlock Driver Door 1st Press” and “Unlock All Doors 1st Press”, refer to “Electronic V ehicle Information Center (EVIC)/Personal Settings (Customer-Programmable Features)” in “Under[...]

Preventing Inadvertent Locking Of Passive Entry RKE T ransmitter In V ehicle T o minimize the possibility of unintentionally locking a Passive Entry RKE transmitter inside your vehicle, the Passive Entry system is equipped with an automatic door unlock feature which will function if there is no Key Fob present in the ignition. If one of the vehicle[...]

NOTE: If “Unlock All Doors 1st Press” is programmed in EVIC, all doors will unlock when you push the button on the liftgate. If ⬙ Unlock Driver Door 1st press ⬙ is programmed in EVIC, the liftgate and Flipper glass will unlock when you press the button on the liftgate For further information, refer to “Electronic V ehicle Informa- tion Ce[...]

W ith one of the vehicle’s Passive Entry RKE transmitters within 5 ft (1.5 m) of the driver or passenger front door handle, press the door handle LOCK button to lock all four doors and liftgate. NOTE: • After pr essing the door handle LOCK button, you must wait two seconds before you can lock or unlock the doors, using either Passive Entry door[...]

WINDOWS Power Windows The power window controls are located on the driver’s door trim panel. There is a single switch on the front passenger door and rear doors which operate the front passenger and rear passenger door windows. The win- dow contr ols will operate only when the ignition switch is in the ON/RUN or ACC position. The power window swi[...]

W ARNING! Never leave children in a vehicle with the key in the ignition switch or leave a vehicle with Keyless Enter - N-Go™ in the ACC or ON/RUN position. Occupants, particularly unattended children, can become en- trapped by the windows while operating the power window switches. Such entrapment may result in serious injury or death. Auto-Down [...]

NOTE: If the window runs into any obstacle during Auto Up it will reverse direction and then go back down. Remove the obstacle and use the window switch again to close the window . Any impact due to rough road condi- tions may trigger the auto reverse function unexpectedly during Auto Up. If this happens, pull the switch lightly to the first detent[...]

W indow Lockout Button The W indow Lockout button on the driver’s door allows you to disable the window controls on the rear doors. T o disable the window controls on the r ear doors, pr ess the W indow Lockout button. T o enable the window controls, press the W indow Lockout button again. Wind Buffeting W ind buf feting can be described as the p[...]

[...]

Liftgate Flipper Glass The liftgate flipper glass is also unlocked when the liftgate is unlocked. T o open the flipper glass, push up on the window switch located on the liftgate. NOTE: The liftgate flipper glass will not open if the liftgate is ajar . Once the liftgate flipper glass has been opened, connec- tion to the rear window wiper is interru[...]

NOTE: If a malfunction to the liftgate latch should occur , an emergency liftgate latch release can be used to open the liftgate. The emergency liftgate latch release can be accessed through a snap-in cover located on the liftgate trim panel. W ARNING! Driving with the flipper glass open can allow poi- sonous exhaust gases into your vehicle. Y ou a[...]

When the LIFTGA TE button on the RKE transmitter is pressed two times, the turn signals will flash twice to signal that the liftgate is opening or closing (if Flash Lamps with Lock is enabled in the EVIC) and the liftgate chime will be audible. For further information, refer to ⬙ Customer-Pr ogrammable Featur es (System Setup)/ Electronic V ehicl[...]

• If anything obstructs the power liftgate while it is closing or opening, the liftgate will automatically reverse to the closed or open position, provided it meets sufficient resistance. • There are also pinch sensors attached to the side of the liftgate. Light pr essure anywhere along these strips will cause the liftgate to return to the open[...]

W ARNING! • Driving with the liftgate open can allow poisonous exhaust gases into your vehicle. Y ou and your passengers could be injured by these fumes. Keep the liftgate closed when you are operating the vehicle. • If you are required to drive with the liftgate open, make sure that all windows are closed, and the climate control blower switch[...]

• Knee bolsters for front seat occupants • Front seat belts incorporate pr etensioners that may enhance occupant pr otection by managing occupant energy during an impact event • All seat belt systems (except the driver ’s) include Automatic Locking Retractors (ALRs), which lock the seat belt webbing into position by extending the belt all t[...]

Children that are not big enough to wear the vehicle seat belt properly (see section on Child Restraints) should be secured in the rear seat in child restraints or belt- positioning booster seats. Older children who do not use child restraints or belt-positioning booster seats should ride properly buckled up in the rear seat. Never allow children t[...]

W ARNING! • Relying on the air bags alone could lead to more severe injuries in a collision. The air bags work with your seat belt to restrain you properly . In some collisions, the air bags won’t deploy at all. Always wear your seat belts even though you have air bags. • Being too close to the steering wheel or instrument panel during Advanc[...]

Research has shown that seat belts save lives, and they can reduce the seriousness of injuries in a collision. Some of the worst injuries happen when people are thrown from the vehicle. Seat belts reduce the possibility of ejection and the risk of injury caused by striking the inside of the vehicle. Everyone in a motor vehicle should be belted at a[...]

W ARNING! (Continued) • It is dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seriously injured or killed. • Do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts. • Be sure everyone in your vehicle is in a se[...]

3. When the belt is long enough to fit, insert the latch plate into the buckle until you hear a “click.” W ARNING! • A belt that is buckled into the wrong buckle will not protect you properly . The lap portion could ride too high on your body , possibly causing internal injuries. Always buckle your belt into the buckle nearest you. • A belt[...]

W ARNING! (Continued) • A belt that is worn under your arm is dangerous. Y our body could strike the inside surfaces of the vehicle in a collision, increasing head and neck injury . A belt worn under the arm can cause internal injuries. Ribs aren’t as strong as shoulder bones. W ear the belt over your shoulder so that your strongest bones will [...]

5. Position the shoulder belt on your chest so that it is comfortable and not resting on your neck. The retrac- tor will withdraw any slack in the belt. 6. T o release the belt, push the r ed button on the buckle. The belt will automatically retract to its stowed posi- tion. If necessary , slide the latch plate down the webbing to allow it to retra[...]

Lap/Shoulder Belt Untwisting Procedure Use the following procedur e to untwist a twisted lap/ shoulder belt. 1. Position the latch plate as close as possible to the anchor point. 2. At about 6 to 12 in (15 to 30 cm) above the latch plate, grasp and twist the belt webbing 180 degrees to create a fold that begins immediately above the latch plate. 3.[...]

button, verify the shoulder belt anchorage is latched by pulling downward on the shoulder belt anchorage until it is locked into position. NOTE: The adjustable upper shoulder belt anchorage is equipped with an Easy Up feature. This feature allows the shoulder belt anchorage to be adjusted in the upwar d position without pushing the r elease button.[...]

Automatic Locking Retractor Mode (ALR) — If Equipped In this mode, the shoulder belt is automatically pre- locked. The belt will still retract to remove any slack in the shoulder belt. The Automatic Locking Mode is avail- able on all passenger-seating positions with a combina- tion lap/shoulder belt. Use the Automatic Locking Mode anytime a child[...]

W ARNING! • The belt and retractor assembly must be replaced if the seat belt assembly Automatic Locking Retractor (ALR) feature or any other seat belt function is not working properly when checked according to the procedures in the Service Manual. • Failure to replace the belt and retractor assembly could increase the risk of injury in collisi[...]

Supplemental Active Head Restraints (AHR) These head restraints are passive, deployable compo- nents, and vehicles with this equipment cannot be readily identified by any markings, only through visual inspec- tion of the head restraint. The head r estraint will be split in two halves, with the front half being soft foam and trim, the back half bein[...]

However if during a front impact, a secondary rear impact occurs, the AHR may deploy based on the severity and type of the impact. CAUTION! All occupants, including the driver , should not oper- ate a vehicle or sit in a vehicle’s seat until the head restraints are placed in their proper positions in order to minimize the risk of neck injury in t[...]

Resetting Active Head Restraints (AHR) If the Active Head Restraints are triggered in a collision, you must reset the head r estraint on the driver ’s and front passenger seat. Y ou can recognize when the Active Head Restraint has been triggered by the fact that they have moved forward (as shown in step three of the resetting procedur e). 1. Gras[...]

3. Pull down then rearward towards the rear of the vehicle then down to engage the locking mechanism. 1 — Downward Movement 2 — Rearward Movement 3 — Final Downward Movement T o Engage Locking Mechanism 68 THINGS TO KNOW BEFORE ST ARTING YOUR VEHICLE I n f o r m a t i o n P r o v i d e d b y :[...]

4. The AHR front soft foam and trim half should lock into the back decorative plastic half. NOTE: • If you have dif ficulties or problems resetting the Active Head Restraints, see an authorized dealer . • For safety reasons, have the Active Head Restraints checked by a qualified specialist at an authorized dealer . Enhanced Seat Belt Use Remind[...]

Light remains illuminated until the respective seat belts are fastened. The driver should instruct all other occu- pants to fasten their seat belts. If a front seat belt is unbuckled while traveling at speeds greater than 5 mph (8 km/h), BeltAlert 威 will provide both audio and visual notification. The fr ont passenger seat BeltAlert 威 is not ac[...]

Pregnant women should wear the lap part of the belt across the thighs and as snug acr oss the hips as possible. Keep the belt low so that it does not come across the abdomen. That way the str ong bones of the hips will take the force if there is a collision. Seat Belt Extender If a seat belt is too short even when fully extended and when the adjust[...]

Supplemental Restraint System (SRS) — Air Bags This vehicle has Advanced Front Air Bags for both the driver and front passenger as a supplement to the seat belt restraint systems. The driver’s Advanced Front Air Bag is mounted in the center of the steering wheel. The passenger’s Advanced Front Air Bag is mounted in the instrument panel, above[...]

The Advanced Front Air Bags have a multistage inflator design. This allows the air bag to have differ ent rates of inflation based on several factors, including the severity and type of collision. This vehicle may be equipped with driver and/or front passenger seat track position sensors that may adjust the inflation rate of the Advanced Front Air [...]

• Instrument Panel • Knee Impact Bolster • Driver Advanced Front Air Bag • Passenger Advanced Front Air Bag • Supplemental Seat-Mounted Side Air Bags (SAB) • Supplemental Side Air Bag Inflatable Curtains (SABIC) • Front and Side Impact Sensors • Front Seat Belt Pretensioners, Seat Belt Buckle Switch, and Seat T rack Position Sensors[...]

W ARNING! (Continued) • Do not put anything on or around the air bag covers or attempt to open them manually . Y ou may damage the air bags and you could be injured because the air bags may no longer be functional. The protective covers for the air bag cushions are designed to open only when the air bags are inflating. • Do not drill, cut or ta[...]

Supplemental Side Air Bag Inflatable Curtain (SABIC) SABIC air bags may offer side-impact and vehicle roll- over protection to fr ont and rear seat outboar d occupants in addition to that provided by the body structure. Each air bag features inflated chambers placed adjacent to the head of each outboard occupant that reduce the potential for side-i[...]

• Being too close to the SAB and SABIC air bags during deployment could cause you to be severely injured or killed. • Should a vehicle rollover occur , the pretensioners and/or SAB and SABIC air bags on both sides of the vehicle may deploy . The system includes side impact sensors that ar e cali- brated to deploy the Supplemental Seat-Mounted S[...]

W ARNING! (Continued) • SAB and SABIC air bags are a supplement to the seat belt restraint system. Occupants, including children who are up against or very close to SAB or SABIC air bags can be seriously injured or killed. Occupants, especially children, should not lean on or sleep against the door , side windows, or area where the SAB or SABIC a[...]

appropriate sized child restraint, infant restraint or booster seat recommended for the size and weight of the child. Knee Impact Bolsters The Knee Impact Bolsters help protect the knees of the driver and the front passenger , and position front occu- pants for the best interaction with the Advanced Front Air Bag. Along with seat belts and pretensi[...]

impact, Advanced Fr ont Air Bags may deploy in crashes with little vehicle front-end damage but that produce a severe initial deceleration. The side air bags will not deploy in all side collisions. Side air bag deployment will depend on the severity and type of collision. Because air bag sensors measure vehicle deceleration over time, vehicle speed[...]

noted that could affect the air bag system. The diagnos- tics also record the nature of the malfunction. W ARNING! Ignoring the Air Bag W arning Light in your instru- ment panel could mean you won’t have the air bags to protect you in a collision. If the light does not come on as a bulb check when the ignition is first turned on, stays on after y[...]

The ORC determines if a side collision requires the side air bags to inflate, based on the severity and type of collision. Based on the severity and type of collision, the side air bag inflator on the crash side of the vehicle may be triggered, releasing a quantity of non-toxic gas. The inflating SAB exits through the seat seam into the space betwe[...]

NOTE: In a rollover the pretensioners and/or SAB and SABIC air bags may deploy on both sides of the vehicle. Front And Side Impact Sensors In fr ont and side impacts, impact sensors can aid the ORC in determining appropriate response to impact events. Enhanced Accident Response System In the event of an impact causing air bag deployment, if the com[...]

If you do have a collision which deploys the air bags, any or all of the following may occur: • The nylon air bag material may sometimes cause abrasions and/or skin reddening to the driver and front passenger as the air bags deploy and unfold. The abrasions are similar to friction rope burns or those you might get sliding along a carpet or gymnas[...]

Maintaining Y our Air Bag System W ARNING! • Modifications to any part of the air bag system could cause it to fail when you need it. Y ou could be injured if the air bag system is not there to protect you. Do not modify the components or wiring, including adding any kind of badges or stickers to the steering wheel hub trim cover or the upper rig[...]

Air Bag W arning Light Y ou will want to have the air bags ready to inflate for your protection in a collision. The Air Bag W arning Light monitors the internal circuits and interconnecting wiring associated with air bag system electrical components. While the air bag system is designed to be maintenance free. If any of the following occurs, have a[...]

time, typically 30 seconds or less. The EDR in this vehicle is designed to recor d such data as: • How various systems in your vehicle were operating; • Whether or not the driver and passenger safety belts were buckled/fastened; • How far (if at all) the driver was depressing the accelerator and/or brake pedal; and, • How fast the vehicle w[...]

There are different sizes and types of restraints for children from newborn size to the child almost lar ge enough for an adult safety belt. Always check the child seat Owner ’s Manual to make sur e you have the correct seat for your child. Before buying any restraint system, make sure that it has a label certifying that it meets all applicable S[...]

Summary Of Recommendations For Restraining Children In V ehicles Child Size, Height, W eight or Age Recommended T ype of Child Restraint Infants and T oddlers Children who ar e two years old or younger and who have not reached the height or weight limits of their child restraint Either an Infant Carrier or a Convertible Child Restraint, facing rear[...]

Infants And Child Restraints Safety experts recommend that children ride rearward- facing in the vehicle until they are two years old or until they reach either the height or weight limit of their rear facing child safety seat. T wo types of child restraints can be used rearward-facing: infant carriers and convertible child seats. The infant carrie[...]

remain in a forward-facing child seat with a harness for as long as possible, up to the highest weight or height allowed by the child seat. All children whose weight or height is above the forward-facing limit for the child seat should use a belt-positioning booster seat until the vehicle’s seat belts fit properly . If the child cannot sit with k[...]

Children T oo Large For Booster Seats Children who are large enough to wear the shoulder belt comfortably , and whose legs are long enough to bend over the front of the seat when their back is against the seatback, should use the seat belt in a rear seat. Use this simple 5-step test to decide whether the child can use the vehicle’s seat belt alon[...]

Recommendations For Attaching Child Restraints Restraint T ype Combined W eight of the Child + Child Restraint Use any attachment method shown with an “X” Below LA TCH – Lower Anchors Only Seat Belt Only LA TCH – Lower Anchors + T op T ether Anchor Seat Belt + T op T ether Anchor Rear-Facing Child Restraint Up to 65 lbs (29.5 kg) XX Rear-Fa[...]

Lower Anchors and T ethers for Children (LA TCH) Restraint System Y our vehicle is equipped with the child r estraint anchor - age system called LA TCH, which stands for Lower Anchors and T ethers for CHildren. The LA TCH system has thr ee vehicle anchor points for installing LA TCH- equipped child seats. There are two lower anchorages located at t[...]

LA TCH Positions For Installing Child Restraints In This V ehicle Lower Anchorage Symbol 2 anchorages per seating position T op T ether Anchorage Symbol 2 THINGS T O KNOW BEFORE ST ARTING YOUR VEHICLE 95 I n f o r m a t i o n P r o v i d e d b y :[...]

What is the weight limit (child’s weight + weight of the child restraint) for using the LA TCH anchorage system to attach the child restraint? 65 lbs (29.5 kg) Use the LA TCH anchorage system until the combined weight of the child and the child restraint is 65 lbs (29.5 kg). Use the seat belt and tether anchor instead of the LA TCH system once th[...]

Can two child restraints be attached using a common lower LA TCH anchorage? No Never “share” a LA TCH anchorage with two or more child restraints. If the center position does not have dedicated LA TCH lower anchorages, use the seat belt to in- stall a child seat in the center position next to a child seat using the LA TCH anchor- ages in an out[...]

Locating The LA TCH Anchorages The lower anchorages are round bars that are found at the rear of the seat cushion where it meets the seatback. They are just visible when you lean into the rear seat to install the child restraint. Y ou will easily feel them if you run your finger along the gap between the seatback and seat cushion. Locating The LA T[...]

you lean into the rear seat to install the child restraint. Y ou will easily feel them if you run your finger along gap between the seatback and seat cushion. Locating The LA TCH Anchorages In addition, there are tether strap anchorages behind each r ear seating position located on the back of the seat. T o access the top tether strap anchorages be[...]

LA TCH-compatible child restraint systems will be equipped with a rigid bar or a flexible strap on each side. Each will have a hook or connector to attach to the lower anchorage and a way to tighten the connection to the anchorage. Forward-facing child restraints and some rear -facing infant r estraints will also be equipped with a tether strap. Th[...]

Always follow the directions of the child restraint manu- facturer when installing your child r estraint. Not all child restraint systems will be installed as described here. V ehicles With A Center Arm Rest T ether For r earward facing infant seats secured in the center seat position with the vehicle seat belts, the rear center seat position has a[...]

3. Raise the armrest and attach the tether hook to the strap located on the front of the arm rest. T o Install A LA TCH-compatible Child Restraint 1. If the selected seating position has a Switchable Auto- matic Locking Retractor (ALR) seat belt, stow the seat belt, following the instructions below . See the section “Installing Child Restraints U[...]

4. Attach the lower hooks or connectors of the child restraint to the lower anchorages in the selected seat- ing position. 5. If the child r estraint has a tether strap, connect it to the top tether anchorage. See the section “Installing Child Restraints Using the T op T ether Anchorage” for direc- tions to attach a tether anchor . 6. T ighten [...]

W ARNING! Improper installation of a child restraint to the LA TCH anchorages can lead to failure of the re- straint. The child could be badly injured or killed. Follow the child restraint manufacturer ’ s directions exactly when installing an infant or child restraint. Installing Child Restraints Using The V ehicle Seat Belt The seat belts in th[...]

Lap/Shoulder Belt Systems for Installing Child Restraints in this V ehicle 2 THINGS T O KNOW BEFORE ST ARTING YOUR VEHICLE 105 I n f o r m a t i o n P r o v i d e d b y :[...]

[...]

Installing A Child Restraint with a Switchable Automatic Locking Retractor (ALR) 1. Place the child seat in the center of the seating position. For some second row seats, you may need to recline the seat and/or raise the head restraint to get a better fit. 2. Pull enough of the seat belt webbing fr om the r etractor to pass it through the belt path[...]

8. If the child restraint has a top tether strap and the seating position has a top tether anchorage, connect the tether strap to the anchorage and tighten the tether strap. Refer to “Lower Anchors and T ethers for Chil- dren (LA TCH) Restraint System” for directions to attach a tether anchor . 9. T est that the child restraint is installed tig[...]

5. If the child restraint has a top tether strap and the seating position has a top tether anchorage, connect the tether strap to the anchorage and tighten the tether strap. Refer to “Lower Anchors and T ethers for Chil- dren (LA TCH) Restraint System” for directions to attach a tether anchor . 6. T est that the child restraint is installed tig[...]

Installing Child Restraints Using The T op T ether Anchorage 1. Look behind the seating position where you plan to install the child restraint to find the tether anchorage. Y ou may need to move the seat forward to provide better access to the tether anchorage. If there is no top tether anchorage for that seating position (see the charts above), mo[...]

3. Route the tether strap to provide the most direct path for the strap between the anchor and the child seat. If your vehicle is equipped with adjustable rear head restraints, raise the head r estraint, and where possible, route the tether strap under the head restraint and between the two posts. If not possible, lower the head restraint and pass [...]

5. Attach the tether strap hook of the child restraint to the top tether anchorage as shown in the diagram. 6. Remove slack in the tether strap according to the child restraint manufacturer ’s instructions. W ARNING! The top tether anchorages are not visible until the gap panel is folded down. Do not use the visible cargo tie down hooks, located [...]

T ransporting Pets Air Bags deploying in the front seat could harm your pet. An unrestrained pet will be thrown about and possibly injured, or injure a passenger during panic braking or in a collision. Pets should be restrained in the rear seat in pet harnesses or pet carriers that are secured by seat belts. ENGINE BREAK-IN RECOMMENDA TIONS A long [...]

NOTE: A new engine may consume some oil during its first few thousand miles (kilometers) of operation. This should be considered a normal part of the break-in and not interpreted as an indication of difficulty . SAFETY TIPS T ransporting Passengers NEVER TRANSPOR T P ASSENGERS IN THE CARGO AREA. W ARNING! • Do not leave children or animals inside[...]

Exhaust Gas W ARNING! Exhaust gases can injure or kill. They contain carbon monoxide (CO), which is colorless and odorless. Breathing it can make you unconscious and can eventually poison you. T o avoid breathing (CO), follow these safety tips: • Do not run the engine in a closed garage or in confined areas any longer than needed to move your veh[...]

Safety Checks Y ou Should Make Inside The V ehicle Seat Belts Inspect the belt system periodically , checking for cuts, frays, and loose parts. Damaged parts must be replaced immediately . Do not disassemble or modify the system. Front seat belt assemblies must be replaced after a collision. Rear seat belt assemblies must be replaced after a collis[...]

W ARNING! Pedals that cannot move freely can cause loss of vehicle control and increase the risk of serious per- sonal injury . • Always make sure that floor mats are properly attached to the floor mat fasteners. • Never place or install floor mats or other floor coverings in the vehicle that cannot be properly secured to prevent them from movi[...]

Periodic Safety Checks Y ou Should Make Outside The V ehicle T ires Examine tir es for excessive tread wear and uneven wear patterns. Check for stones, nails, glass, or other objects lodged in the tread or sidewall. Inspect the tread for cuts and cracks. Inspect sidewalls for cuts, cracks and bulges. Check the wheel nuts for tightness. Check the ti[...]

UNDERST ANDING THE FEA TURES OF YOUR VEHICLE CONTENTS 䡵 MIRRORS ........................... .126 ▫ Inside Day/Night Mirror ............... .126 ▫ Automatic Dimming Mirror — If Equipped ........................ .127 ▫ Outside Mirrors ..................... .128 ▫ Outside Mirrors Folding Feature ......... .128 ▫ Outside Automatic Dimming[...]

▫ Phone Call Features ................... .150 ▫ Uconnect 威 Phone Features .............. .153 ▫ Advanced Phone Connectivity ........... .158 ▫ Things Y ou Should Know About Y our Uconnect 威 Phone ..................... .160 ▫ General Information .................. .171 䡵 VOICE COMMAND — IF EQUIPPED ...... .171 ▫ V oice Command S[...]

▫ Linking And Unlinking The Remote Keyless Entry T ransmitter T o Memory ............ .198 ▫ Memory Position Recall ................ .199 ▫ Easy Entry/Exit Seat .................. .200 䡵 TO OPEN AND CLOSE THE HOOD ........ .201 䡵 LIGHTS ............................ .203 ▫ Headlight Switch .................... .203 ▫ Automatic Headligh[...]

䡵 WINDSHIELD WIPERS AND W ASHERS ..... .214 ▫ W indshield W iper Operation ............ .215 ▫ Intermittent W iper System .............. .216 ▫ W indshield W asher Operation ............ .216 ▫ Mist .............................. .217 ▫ Rain Sensing W ipers — If Equipped ....... .218 䡵 TIL T/TELESCOPING STEERING COLUMN . . .220 䡵 [...]

▫ T o V ary The Speed Setting .............. .235 ▫ Setting The Following Distance In ACC ..... .236 ▫ Adaptive Cruise Control (ACC) Menu ...... .240 ▫ Display W arnings And Maintenance ....... .241 ▫ Precautions While Driving W ith ACC ...... .245 ▫ General Information .................. .249 ▫ Normal (Fixed Speed) Cruise Control Mod[...]

▫ Sunglasses Bin Door .................. .270 䡵 GARAGE DOOR OPENER — IF EQUIPPED . . .270 ▫ Before Y ou Begin Programming HomeLink 威 . . .272 ▫ Programming A Rolling Code ............ .272 ▫ Programming A Non-Rolling Code ........ .274 ▫ Canadian/Gate Operator Programming ..... .276 ▫ Using HomeLink 威 .................... .277 ?[...]

▫ Closing Sunroof — Manual Mode ......... .285 ▫ Opening Power Shade — Express ......... .285 ▫ Opening Power Shade — Manual Mode .... .285 ▫ Closing Power Shade — Express .......... .285 ▫ Closing Power Shade — Manual Mode ..... .285 ▫ Pinch Protect Feature .................. .286 ▫ W ind Buffeting ...................... .2[...]

MIRRORS Inside Day/Night Mirror A single ball joint mirror is provided in the vehicle. It is a twist on mirror that has a fixed position at the wind- shield. The mirror installs on the windshield button with a counterclockwise rotation and requir es no tools for mounting. The mirror head can be adjusted up, down, left, and right for various drivers[...]

Automatic Dimming Mirror — If Equipped This mirror automatically adjusts for headlight glare from vehicles behind you. Y ou can turn the feature on or off by pressing the button at the base of the mirror . A light in the button will illuminate to indicate when the dim- ming feature is activated. The mirror is twisted on the windshield button coun[...]

Outside Mirrors T o receive maximum benefit, adjust the outside mirrors to center on the adjacent lane of traffic with a slight overlap of the view obtained on the inside mirror . W ARNING! V ehicles and other objects seen in the passenger side convex mirror will look smaller and farther away than they really are. Relying too much on your passenger[...]

Power Mirrors The power mirror switch is located on the driver’s side door trim panel. The power mirror controls consist of mirror select but- tons and a four-way mirror control switch. T o adjust a mirror , pr ess the mirror select button for the mirror that you want to adjust. Using the mirror contr ol switch, press on any of the four arrows fo[...]

Power mirror preselected positions can be controlled by the optional Memory Seat Feature. Refer to “Driver Memory Seat” in “Understanding The Features Of Y our V ehicle” for further information. Heated Mirrors — If Equipped These mirrors ar e heated to melt frost or ice. This feature is activated whenever you turn on the rear window defro[...]

Sun Visor Extension — If Equipped This feature has a pull out extension on the sun visor for increased coverage. BLIND SPOT MONITORING — IF EQUIPPED The Blind Spot Monitoring (BSM) system uses two radar- based sensors, located inside the rear bumper fascia, to detect highway licensable vehicles (automobiles, trucks, motorcycles, etc.) that ente[...]

When the vehicle is started, the BSM warning light will momentarily illuminate in both outside r ear view mirrors to let the driver know that the system is operational. The BSM system sensors operate when the vehicle is in any forward gear or REVERSE and enters stand-by mode when the vehicle is in P ARK. The BSM detection zone covers approximately [...]

The BSM system notifies the driver of objects in the detection zones by illuminating the BSM warning light located in the outside mirrors in addition to sounding an audible (chime) alert and reducing the radio volume. Refer to “Modes Of Operation” for further information. The BSM system monitors the detection zone from three differ ent entry po[...]

Entering From The Side V ehicles that move into your adjacent lanes from either side of the vehicle. Entering From The Rear V ehicles that come up from behind your vehicle on either side and enter the rear detection zone with a relative speed of less than 30 mph (48 km/h). Side Monitoring Rear Monitoring 134 UNDERST ANDING THE FEA TURES OF YOUR VEH[...]

Overtaking T raffic If you pass another vehicle slowly (with a r elative speed less than 10 mph (16 km/h) and the vehicle remains in the blind spot for approximately 1.5 seconds, the warning light will be illuminated. If the difference in speed between the two vehicles is greater than 10 mph (16 km/h), the warning light will not illuminate. Overtak[...]

The BSM system is designed not to issue an alert on stationary objects such as guardrails, posts, walls, foliage, berms, etc. However , occasionally the system may alert on such objects. This is normal operation and your vehicle does not requir e service. Overtaking/Passing Stationary Objects 136 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE I n f o[...]

The BSM system will not alert you of objects that are traveling in the opposite direction of the vehicle in adjacent lanes. W ARNING! The Blind Spot Monitoring system is only an aid to help detect objects in the blind spot zones. The BSM system is not designed to detect pedestrians, bicy- clists, or animals. Even if your vehicle is equipped with th[...]

Rear Cross Path The Rear Cross Path (RCP) feature is intended to aid the driver when backing out of parking spaces where their vision of oncoming vehicles may be blocked. Proceed slowly and cautiously out of the parking space until the rear end of the vehicle is exposed. The RCP system will then have a clear view of the cr oss traffic and if an onc[...]

NOTE: In a parking lot situation, oncoming vehicles can be obscured by vehicles parked on either side. If the sensors are blocked by other structures or vehicles, the system will not be able to alert the driver . When RCP is on and the vehicle is in REVERSE, the driver is alerted using both the visual and audible alarms, including reducing the radi[...]

Blind Spot Alert Lights/Chime When operating in Blind Spot Alert Lights/Chime mode, the BSM system will provide a visual alert in the appro- priate side view mirror based on a detected object. If the turn signal is then activated, and it corresponds to an alert present on that side of the vehicle, an audible chime will also be sounded. Whenever a t[...]

display the message “ Blind spot system unavailable- Astronomy zone”. The side mirrors LED’s will be lit up and stay lit until the vehicle exits the zone. Uconnect 姞 Phone — IF EQUIPPED Uconnect 威 Phone is a voice-activated, hands-free, in- vehicle communications system. Uconnect 威 Phone al- lows you to dial a phone number with your m[...]

W ARNING! Any voice commanded system should be used only in safe driving conditions following all applicable laws, including laws regarding phone use. All atten- tion should be focused on safely operating the ve- hicle. Failure to do so may result in a collision causing serious injury or death. Uconnect 威 Phone Button The radio or steering wheel [...]

The radio display will be used for visual prompts from the Uconnect 威 Phone such as “CELL” or caller ID on certain radios. Operation V oice commands can be used to operate the Uconnect 威 Phone and to navigate thr ough the Uconnect 威 Phone menu structure. V oice commands are requir ed after most Uconnect 威 Phone prompts. Y ou will be pro[...]

T o activate the Uconnect 威 Phone, simply pr ess the button and follow the audible prompts for directions. Uconnect 威 Phone sessions begin with a press of the button on the radio control head. Cancel Command At any prompt, after the beep, you can say “Cancel” and you will be returned to the main menu. However , in a few instances the system[...]

• Y ou will then be asked to give your mobile phone a priority level between one and seven, with one being the highest priority . Y ou can pair up to seven mobile phones to your Uconnect 威 Phone. However , at any given time, only one mobile phone can be in use, connected to your Uconnect 威 System. The priority allows the Uconnect 威 Phone to[...]

or downloaded phonebook. T o learn how to store a name in the phonebook, r efer to “Add Names to Y our Uconnect 威 Phonebook”, in the phonebook. • The Uconnect 威 system will confirm the name and then dial the corresponding phone number , which may appear in the display of certain radios. Phonebook Download – Automatic Phonebook T ransfer[...]

• This downloaded phonebook cannot be edited or deleted on the Uconnect 威 Phone. These can only be edited on the mobile phone. The changes are trans- ferred and updated to Uconnect 威 Phone on the next phone connection. Add Names T o Y our Uconnect 威 Phonebook NOTE: Adding names to the Uconnect 威 Phonebook is recommended when the vehicle i[...]

Edit Uconnect 威 Phonebook Entries NOTE: • Editing names in the phonebook is recommended when the vehicle is not in motion. • Automatic downloaded phonebook entries cannot be deleted or edited. • Press the button to begin. • After the “Ready” prompt and the following beep, say “Phonebook Edit Entry”. • Y ou will then be asked for[...]

• After you enter the Phonebook Delete menu, you will then be asked for the name of the entry that you wish to delete. Y ou can either say the name of a phonebook entry that you wish to delete or you can say “List Names” to hear a list of the entries in the phonebook from which you choose. T o select one of the entries from the list, press th[...]

• After the “Ready” prompt and the following beep, say “Phonebook List Names”. • The Uconnect 威 Phone will play the names of all the phonebook entries, including the downloaded phone- book entries, if available. • T o call one of the names in the list, pr ess the but- ton during the playing of the desired name, and say “Call”. N[...]

mobile phone. Press the button to place the current call on hold and answer the incoming call. NOTE: The Uconnect 威 Phone compatible phones in the market today do not support rejecting an incoming call when another call is in progr ess. Therefore, the user can only answer an incoming call or ignore it. Making A Second Call While Current Call Is I[...]

Three-W ay Calling T o initiate thr ee-way calling, press the button while a call is in progr ess, and make a second phone call, as described under “Making a Second Call While Current Call is in Progress”. After the second call has established, press and hold the button until you hear a double beep, indicating that the two calls have been joine[...]

ends, or until the vehicle battery condition dictates cessation of the call on the Uconnect 威 Phone and transfer of the call to the mobile phone. • After the ignition key is cycled to OFF , a call can continue on the Uconnect 威 Phone for a certain dura- tion, after which the call is automatically transferred from the Uconnect 威 Phone to the[...]

If the phone is not reachable and the Uconnect 威 Phone is operational, you may r each the emergency number as follows: • Press the button to begin. • After the “Ready” prompt and the following beep, say “Emergency” and the Uconnect 威 Phone will instruct the paired mobile phone to call the emergency number . This featur e is supporte[...]

NOTE: • The roadside assistance number dialed is based on the country where the vehicle is purchased (1-800-528-2069 for the U.S., 1-877-213-4525 for Canada, 55-14-3454 for Mexico City and 1-800-712-3040 for outside Mexico City in Mexico). Please r efer to the “Roadside Assistance” coverage details on the DVD in the W arranty Informa- tion Bo[...]

button and say the sequence you wish to enter , followed by the word “Send”. For example, if r equired to enter your PIN followed with a pound, ( 3746# ) ,y o u can press the button and say , “ 3746# Send”. Saying a number , or sequence of numbers, followed by “Send”, is also to be used for navigating through an automated customer servi[...]

T urning Confirmation Prompts ON/OFF T urning confirmation prompts off will stop the system from confirming your choices (e.g., the Uconnect 威 Phone will not repeat a phone number before you dial it). • Press the button to begin. • After the “Ready” prompt and the following beep, say one of the following: – “Setup Confirmation Prompts[...]

Mute/Un-Mute (Mute ON/OFF) When you mute the Uconnect 威 Phone, you will still be able to hear the conversation coming from the other party , but the other party will not be able to hear you. In order to mute the Uconnect 威 Phone: • Press the button. • Following the beep, say “Mute”. In order to un-mute the Uconnect 威 Phone: • Press [...]

• When prompted, say “List Phones”. • The Uconnect 威 Phone will play the phone names of all paired mobile phones in or der from the highest to the lowest priority . T o “Select” or “Delete” a paired phone being announced, press the button and say “Se- lect” or “Delete”. Also, see the next two sections for an alternate way [...]

Things Y ou Should Know About Y our Uconnect 姞 Phone Uconnect 威 Phone T utorial T o hear a brief tutorial of the system features, press the button and say “Uconnect 威 T utorial.” V oice T raining For users experiencing difficulty with the system recogniz- ing their voice commands or numbers, the Uconnect 威 Phone V oice T raining feature[...]

This will delete all phone pairing, phone book entries, and other settings in all language modes. The System will prompt you before resetting to factory settings. V oice Command • For best performance, adjust the rearview mirror to provide at least ½ in (1 cm) gap between the overhead console (if equipped) and the mirror . • Always wait for th[...]

• Phonebook (Downloaded and Uconnect 威 Phone Lo- cal) name recognition rate is optimized when the entries are not similar . • Numbers must be spoken in single digits. “800” must be spoken “eight-zero-zero” not “eight hundred”. • Y ou can say “O” (letter “O”) for “0” (zero). • Even though international dialing for m[...]

SMS Uconnect 威 Phone can read or send new messages on your phone. Read Messages: If you receive a new text message while your phone is connected to Uconnect 威 Phone, an announcement will be made to notify you that you have a new text message. If you wish to hear the new message: • Press the button. • After the “Ready” prompt and the fol[...]

3. Where are you? 4. I need more direction. 5. L O L 6. Why 7. I love you 8. Call me 9. Call me later 10. Thanks 1 1. See Y ou in 15 minutes 12. I am on my way 13. I’ll be late 14. Are you there yet? 15. Where are we meeting? 16. Can this wait? 17. Bye for now 18. When can we meet? 19. Send number to call 20. Start without me 164 UNDERST ANDING T[...]

T urn SMS Incoming Announcement ON/OFF T urning the SMS Incoming Announcement OFF will stop the system from announcing the new incoming mes- sages. • Press the button. • After the “Ready” prompt and the following beep, say “Setup, SMS Incoming Message Announcement,” you will then be given a choice to change it. Bluetooth 威 Communicati[...]

166 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE I n f o r m a t i o n P r o v i d e d b y :[...]

3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 167 I n f o r m a t i o n P r o v i d e d b y :[...]

168 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE I n f o r m a t i o n P r o v i d e d b y :[...]

V oice Commands Primary Alternate (s) zero one two three four five six seven eight nine star (*) plus (+) pound (#) add location V oice Commands Primary Alternate (s) all call cancel confirmation prompts continue delete dial download edit emergency English erase all Espanol Francais 3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 169 I n f o r m a t[...]

V oice Commands Primary Alternate (s) help home language list names list phones mobile mute mute off new entry no other pair a phone phone pairing pairing phonebook phone book V oice Commands Primary Alternate (s) previous recor d again redial return to main menu return or main menu select phone select send set up phone settings or phone set up tow[...]

General Information This device complies with Part 15 of the FCC rules and RSS 210 of Industry Canada. Operation is subject to the following conditions: • Changes or modifications not expressly approved by the party r esponsible for compliance could void the user’s authority to operate the equipment. • This device may not cause harmful interf[...]

W ARNING! Any voice commanded system should be used only in safe driving conditions following all applicable laws. All attention should be focused on safely operating the vehicle. Failure to do so may result in a collision causing serious injury or death. When you press the V oice Command button, you will hear a beep. The beep is your signal to giv[...]

T o hear the first available Menu, press the V oice Com- mand button and say “Help” or “Main Menu”. Commands The V oice Command system understands two types of commands. Universal commands are available at all times. Local commands are available if the supported radio mode is active. Changing The V olume 1. Start a dialogue by pressing the [...]

Radio AM (Or Radio Long W ave Or Radio Medium W ave — If Equipped) T o switch to the AM band, say “AM” or “Radio AM”. In this mode, you may say the following commands: • “Frequency #” (to change the frequency) • “Next Station” (to select the next station) • “Previous Station” (to select the previous station) • “Menu [...]

• “Previous T rack” (to play the previous track) • “Play” (to play a Artist Name, Playlist Name, Album Name, T rack Name, etc.) Bluetooth 威 Streaming (BT) Mode T o switch to Bluetooth 威 Streaming (BT) mode, say “Bluetooth Streaming”. In this mode, you may say the following commands: • “Next T rack” (to play the next track)[...]

System Setup T o switch to system setup, you may say on of the following: • “Change to system setup” • “Main menu system setup” • “Switch to system setup” • “Change to setup” • “Main menu setup” or • “Switch to setup” In this mode, you may say the following commands: • “Language English” • “Language Fre[...]

2. Repeat the words and phrases when pr ompted by Uconnect 威 V oice. For best results, the V oice T raining session should be completed when the vehicle is parked, engine running, all windows closed, and the blower fan switched off. This procedur e may be re- peated with a new user . The system will adapt to the last trained voice only . SEA TS S[...]

Power Seats — If Equipped Some models may be equipped with eight-way power driver and fr ont passenger seats. The power seat switches are located on the outboard side of the seat. Ther e ar e two switches that control the movement of the seat cushion and the seatback. Power Seat Switches 1 — Seatback Switch 2 — Seat Switch 178 UNDERST ANDING [...]

Adjusting The Seat Forward Or Rearward The seat can be adjusted both forwar d and rearward. Push the seat switch forward or rearward, the seat will move in the direction of the switch. Release the switch when the desired position has been reached. Adjusting The Seat Up Or Down The height of the seats can be adjusted up or down. Pull upward or push [...]

W ARNING! (Continued) • Do not ride with the seatback reclined so that the shoulder belt is no longer resting against your chest. In a collision you could slide under the seat belt, which could result in serious injury or death. CAUTION! Do not place any article under a power seat or impede its ability to move as it may cause damage to the seat c[...]

Power Lumbar — If Equipped V ehicles equipped with power driver or passenger seats are also equipped with power lumbar . The power lumbar switch is located on the outboard side of the power seat. Push the switch forward to incr ease the lumbar support. Push the switch rearwar d to decrease the lumbar sup- port. Pushing upward or downward on the s[...]

Manual Front Seats Forward/Rearward Adjustment Some models may be equipped with manual front driver or passenger seats. The seats can be adjusted forward or rearwar d by using a bar located by the front of the seat cushion, near the floor . While sitting in the seat, lift up on the bar located under the seat cushion and move the seat forwar d or re[...]

Manual Front Passenger Seatback Adjustment — Recline T o adjust the seatback, lift the lever located on the outboard side of the seat, lean back to the desired position and release the lever . T o return the seatback, lift the lever , lean forward and release the lever . W ARNING! Do not ride with the seatback reclined so that the shoulder belt i[...]

Front Passenger Seat Fold-Flat Feature — If Equipped T o fold the seatback to the flat load-floor position, lift the recline lever and push the seatback forward. T o return to the seating position, raise the seatback and lock it into place. Heated Seats — If Equipped On some models, the front and rear seats may be equipped with heaters in both [...]

W ARNING! (Continued) • Do not place anything on the seat or seatback that insulates against heat, such as a blanket or cushion. This may cause the seat heater to overheat. Sitting in a seat that has been overheated could cause serious burns due to the increased surface tempera- ture of the seat. V ehicles Equipped with Remote Start On models tha[...]

60 minutes of continuous operation. At that time, the num- ber of illuminated LEDs changes from two to one, indicating the change. The LOW -level setting will turn OFF automati- cally after approximately 45 minutes. Rear Heated Seats On some models, the two outboard seats are equipped with heated seats. There are two heated seat switches that allow[...]

Y ou can choose from HIGH, LOW or OFF heat settings. Amber indicator lights in each switch indicate the level of heat in use. T wo indicator lights will illuminate for HIGH, one for LOW and none for OFF . Press the switch once to select HIGH-level heating. Pr ess the switch a second time to select LOW -level heating. Pr ess the switch a third time [...]

The ventilated seat switches ar e located on the switch bank in the center stack of the instrument panel, just below the climate controls. The ventilated seat switches are used to control the speed of the fans located in the seat. Pr ess the switch once to choose HIGH, press it a second time to choose LOW . Pressing the switch a third time will tur[...]

Active Head Restraints — Front Seats Active Head Restraints are passive, deployable compo- nents, and vehicles with this equipment cannot be readily identified by any markings, only through visual inspec- tion of the head restraint. The head r estraint will be split in two halves, with the front half being soft foam and trim, the back half being [...]

For comfort the Active Head Restraints can be tilted forward and rearward. T o tilt the head restraint closer to the back of your head, pull forward on the bottom of the head restraint. Push rearward on the bottom of the head restraint to move the head restraint away from your head. NOTE: • The head r estraints should only be removed by quali- fi[...]

• In the event of deployment of an Active Head Re- straint, refer to “Occupant Restraints/Resetting Active Head Restraints (AHR)” in “Things T o Know Before Starting Y our V ehicle” for further information. W ARNING! • Do not place items over the top of the Active Head Restraint, such as coats, seat covers or portable DVD players. These[...]

Head Restraints — Rear Seats The head restraints on the outboard seats are not adjust- able. They automatically fold forward when the rear seat is folded to a load floor position but do not r eturn to their normal position when the rear seat is raised. After returning either seat to its upright position, raise the head restraint until it locks in[...]

W ARNING! (Continued) collision. Always make sure the outboard head re- straints are in their upright positions when the seat is to be occupied. NOTE: For proper routing of a Child Seat T ether refer to “Occupant Restraints” in “Things to Know Before Start- ing Y our V ehicle” for further information. 60/40 Split Rear Seat T o Lower Rear Se[...]

• Do not fold the 40% rear seat down with the right outboard seat belt buckled. 2. Fold the rear seat completely forward. T o Raise Rear Seat Raise the rear seatback and lock it into place. If interfer- ence from the car go area prevents the seatback fr om fully locking, you will have difficulty returning the seat to its proper position. W ARNING[...]

Reclining Rear Seat T o recline the seatback, lift the lever located on the outboard side of the seat, lean back and r elease the lever at the desired position. T o return the seatback, lift the lever , lean forward and release the lever . W ARNING! Do not ride with the seatback reclined so that the shoulder belt is no longer resting against your c[...]

NOTE: Y our vehicle is equipped with two RKE trans- mitters. One or both RKE transmitters can be linked to either memory position. The memory system can accom- modate up to four RKE transmitters, each one linked to either of the two memory positions. The memory seat switch is located on the driver ’s door trim panel. The switch consists of three [...]

Programming The Memory Feature NOTE: T o create a new memory profile, perform the following: V ehicles Equipped With Keyless Enter-N-Go 1. W ithout pressing the brake pedal, push the ENGINE ST AR T/STOP button and cycle the ignition to the ON/RUN position (Do not start the engine). 2. Adjust all memory profile settings to desired prefer - ences (i.[...]

NOTE: • Memory profiles can be set without the vehicle in P ARK, but the vehicle must be in P ARK to recall a memory profile. • The Recall Memory with Remote Linked to Memory feature can be enabled through the Electronic V ehicle Information Center (EVIC), refer to “Electronic V ehicle Information Center (EVIC)/Customer-Programmable Features?[...]

4. Press and release the LOCK button on the RKE transmitter within 10 seconds. NOTE: Y our RKE transmitters can be unlinked to your memory settings by pressing the SET (S) button followed by the UNLOCK button on the RKE transmitter in Step 4 above. Memory Position Recall NOTE: The vehicle must be in P ARK to recall memory positions. If a r ecall is[...]

NOTE: When recall is requested with the RKE transmit- ter and the Easy Entry/Exit Seat is turned ON, the seat will go to the Easy Entry position. When the ignition is placed in the ON/RUN position, the seat will then automatically return to the set memory position. A recall can be cancelled by pressing any of the MEMOR Y buttons on the drivers door[...]

• The Easy Entry/Easy Exit feature is disabled when the driver seat position is less than 0.9 in (22.7 mm) forward of the rear stop. At this position, there is no benefit to the driver by moving the seat for Easy Exit or Easy Entry . Each stored memory setting will have an associated Easy Entry and Easy Exit position. NOTE: The Easy Entry/Exit fe[...]

2. Reach under the hood, move safety latch to the left and lift the hood. CAUTION! T o prevent possible damage, do not slam the hood to close it. Use a firm downward push at the center of the hood to ensure that both latches engage. W ARNING! Be sure the hood is fully latched before driving your vehicle. If the hood is not fully latched, it could o[...]

LIGHTS Headlight Switch The headlight switch is located on the left side of the instrument panel, next to the steering wheel. The head- light switch controls the operation of the headlights, parking lights, instrument panel lights, cargo lights and fog lights (if equipped). T o turn on the headlights, rotate the headlight switch clockwise. When the[...]

NOTE: • Y our vehicle is equipped with plastic headlight and fog light (if equipped) lenses that are lighter and less susceptible to stone breakage than glass lights. Plastic is not as scratch r esistant as glass and therefor e dif fer- ent lens cleaning procedur es must be followed. • T o minimize the possibility of scratching the lenses and r[...]

Information Center (EVIC)/Customer-Pr ogrammable Features” in “Understanding Y our Instrument Panel” for further information. If your vehicle is equipped with a “Rain Sensitive W iper System” and it is activated, the headlights will automati- cally turn on after the wipers complete five wipe cycles within appr oximately one minute, and th[...]

T o Activate 1. Enable the Automatic High Beams. Refer to “Elec- tronic V ehicle Information Center (EVIC)/Customer- Programmable Features” in “Understanding Y our In- strument Panel” for further information. 2. T urn the headlight switch to the AUTO headlight position. 3. Push the multifunction lever away from you (toward front of vehicle)[...]

Automatic Headlight Leveling — HID Headlights Only This feature prevents the headlights from interfering with the vision of oncoming drivers. Headlight leveling automatically adjusts the height of the headlight beam in reaction to changes in vehicle pitch. Headlight Delay T o aid in your exit, your vehicle is equipped with a headlight delay that [...]

Fog Lights — If Equipped The fog lights ar e turned on by rotating the headlight switch to the parking light or headlight position and pushing in the headlight rotary control. The fog lights will operate only when the parking lights are on or when the vehicle headlights are on low beam. An indicator light located in the instrument cluster will il[...]

The brightness of the instrument panel lighting can be regulated by r otating the dimmer control up (brighter) or down (dimmer). When the headlights are on you can supplement the brightness of the odometer , trip odom- eter , radio and overhead console by rotating the control to its farthest position up until you hear a click. This feature is terme[...]

Battery Saver T o protect the life of your vehicle’s battery , load shedding is provided for both the interior and exterior lights. If the ignition is OFF and any door is left ajar for 10 minutes or the dimmer control is rotated all the way up to the dome ON position for 10 minutes, the interior lights will automatically turn off. If the headligh[...]

Each light can be turned on by pressing a switch on either side of the console. These buttons are backlit for night time visibility . T o turn the lights off, press the switch a second time. The lights will also turn on when the UNLOCK button on the Remote Keyless Entry (RKE) is pressed. Courtesy Lights The courtesy lights can be turned on by press[...]

Ambient Light The overhead console is equipped with an ambient light feature. This light casts illumination for impr oved visibil- ity of the floor center console and PRNDL ar ea. Multifunction Lever The multifunction lever is located on the left side of the steering column. Ambient Light Multifunction Lever 212 UNDERST ANDING THE FEA TURES OF YOUR[...]

T urn Signals Move the multifunction lever up or down and the arr ows on each side of the instrument cluster flash to show proper operation of the front and r ear turn signal lights. NOTE: If either light remains on and does not flash, or there is a very fast flash rate, check for a defective outside light bulb. If an indicator fails to light when [...]

WINDSHIELD WIPERS AND W ASHERS The windshield wiper/washer controls are located on the multifunction lever on the left side of the steering col- umn. The front wipers are operated by rotating a switch, located on the end of the lever . For information on the rear wiper/washer , refer to “Rear W indow Features” in “Understanding The Features O[...]

Windshield Wiper Operation Rotate the end of the lever to one of the first four detent positions for intermittent settings, the fifth detent for low wiper operation and the sixth detent for high wiper operation. CAUTION! Always remove any buildup of snow that prevents the windshield wiper blades from returning to the “park” position. If the win[...]

Intermittent Wiper System Use one of the four intermittent wiper settings when weather conditions make a single wiping cycle, with a variable delay between cycles, desirable. At driving speeds above 10 mph (16 km/h), the delay can be regulated from a maximum of appr oximately 18 seconds between cycles (first detent), to a cycle every one second (fo[...]

lever is pushed while in the intermittent setting, the wipers will turn on and operate for several wipe cycles after the end of the lever is released, and then resume the intermittent interval previously selected. If the end of the lever is pushed while the wipers are in the of f position, the wipers will operate for several wipe cycles, then turn [...]

NOTE: The mist featur e does not activate the washer pump; ther efore, no washer fluid will be sprayed on the windshield. The wash function must be used in order to spray the windshield with washer fluid. Rain Sensing Wipers — If Equipped This feature senses moisture on the windshield and automatically activates the wipers for the driver . The fe[...]

• The Rain Sensing feature may not function properly when ice, or dried salt water is present on the windshield. • Use of Rain-X 威 or products containing wax or silicone may reduce Rain Sensing performance. • A customer programmable feature in the Electr onic V ehicle Information Center (EVIC) allows the Rain Sensing feature to be turned of[...]

TIL T/TELESCOPING STEERING COLUMN This feature allows you to tilt the steering column upward or downward. It also allows you to lengthen or shorten the steering column. The tilt/telescoping lever is located below the steering wheel at the end of the steering column. T o unlock the steering column, push the lever downwar d (toward the floor). T o ti[...]

POWER TIL T/TELESCOPING STEERING COLUMN — IF EQUIPPED This feature allows you to tilt the steering column upward or downward. It also allows you to lengthen or shorten the steering column. The power tilt/telescoping steering column lever is located below the multifunction lever on the steering column. T o tilt the steering column, move the lever [...]

NOTE: For vehicles equipped with Driver Memory Seat, you can use your Remote Keyless Entry (RKE) transmit- ter or the memory switch on the driver’s door trim panel to return the tilt/telescopic steering column to pre- programmed positions. Refer to “Driver Memory Seat” in this section for further information. W ARNING! Do not adjust the steer[...]

NOTE: The engine must be running for the heated steering wheel to operate. V ehicles Equipped W ith Remote Start On models that are equipped with remote start, the heated steering wheel can be programmed to come on during a remote start. Refer to “Remote Starting System — If Equipped” in “Things to Know Before Starting Y our V ehicle” for[...]

The Electronic Speed Control buttons are located on the right side of the steering wheel. NOTE: In order to ensure pr oper operation, the Elec- tronic Speed Control System has been designed to shut down if multiple Speed Contr ol functions are operated at the same time. If this occurs, the Electronic Speed Control System can be reactivated by pushi[...]

W ARNING! Leaving the Electronic Speed Control system on when not in use is dangerous. Y ou could accidentally set the system or cause it to go faster than you want. Y ou could lose control and have an accident. Always leave the system OFF when you are not using it. T o Set A Desired Speed T urn the Electr onic Speed Contr ol ON. When the vehicle h[...]

T o decrease speed while the Electronic Speed Control is set, push the SET (-) button. If the button is continually held in the SET (-) position, the set speed will continue to decrease until the button is released. Release the button when the desired speed is reached, and the new set speed will be established. Pressing the SET (-) button once will[...]

ADAPTIVE CRUISE CONTROL (ACC) — IF EQUIPPED Adaptive Cruise Contr ol (ACC) increases the driving convenience provided by cruise control while traveling on highways and major roadways. However , it is not a safety system and not designed to prevent collisions. ACC will allow you to keep cruise control engaged in light to moderate traffic condition[...]

W ARNING! • Adaptive Cruise Control (ACC) is a convenience system. It is not a substitute for active driving involvement. It is always the driver ’ s responsibility to be attentive of road, traffic, and weather condi- tions, vehicle speed, distance to the vehicle ahead; and, most importantly , brake operation to ensure safe operation of the veh[...]

W ARNING! Y ou should switch off the ACC system: • When driving in fog, heavy rain, heavy snow , sleet, heavy traffic, and complex driving situations (i.e., in highway construction zones). • When entering a turn lane or highway off ramp; when driving on roads that are winding, icy , snow- covered, slippery , or have steep uphill or downhill slo[...]

NOTE: The system will not react to preceding vehicles. Always be aware of the mode selected. Y ou can change the mode by using the Cruise Control buttons. The two control modes function differ ently . Always confirm which mode is selected. Adaptive Cruise Control (ACC) Operation The speed control buttons (located on the right side of the steering w[...]

NOTE: Any chassis/suspension modifications to the ve- hicle will effect the performance of the Adaptive Cruise Control. Activating Adaptive Cruise Control (ACC) Y ou can only activate ACC if the vehicle speed is above 18 mph (30 km/h). When the system is turned on and in the READY state, the Electronic V ehicle Information Center (EVIC) dis- plays [...]

T o Activate Push and release the ON/OFF button. The ACC menu in the EVIC displays “Adaptive Cruise Control Ready .” T o turn the system OFF , push and release the ON/OFF button again. At this time, the system will turn off and the EVIC will display “Adaptive Cruise Control Of f.” W ARNING! Leaving the Adaptive Cruise Control (ACC) system o[...]

Remove your foot from the accelerator pedal. If you do not, the vehicle may continue to accelerate beyond the set speed. If this occurs: • The message “DRIVER OVERRIDE” will display in the EVIC. • The system will not be contr olling the distance be- tween your vehicle and the vehicle ahead. The vehicle speed will only be determined by the p[...]

T o Cancel The system will disable ACC without erasing the memory if: • Y ou softly tap the brake pedal. • Y ou depress the brake pedal. • Y ou press the CANCEL switch. • The speed of the vehicle goes below 15 mph (25 km/h). • An Anti-Lock Brake System (ABS) event occurs. • A T railer Sway Control (TSC) event occurs. • The transmissio[...]

T o T urn Off The system will turn off and erase the set speed in memory if: • Y ou push the ON/OFF button. • Y ou turn OFF the ignition. • Y ou switch to Four-Wheel Drive Low . T o Resume Speed Press the RES + button and release. Then remove your foot fr om the accelerator pedal. The EVIC will display the last set speed. NOTE: Y ou can resum[...]

Pressing the RES + button once will result i na1m p h (1.6 km/h) increase in set speed. Each subsequent tap of the button results in an increase of 1 mph (1.6 km/h). While ACC is set, the set speed can be decreased by pressing and holding the SET - button. If the button is continually pressed, the set speed will continue to de- crease in 5 mph (8 k[...]

Distance Setting 3 Distance Setting 2 3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 237 I n f o r m a t i o n P r o v i d e d b y :[...]

T o change the distance setting, press the Distance button and release. Each time the button is pressed, the distance setting adjusts between long, medium, and short. If there is no vehicle ahead, the vehicle will maintain the set speed. If a slower moving vehicle is detected in the same lane, the EVIC displays the “Sensed V ehicle Indi- cator”[...]

The maximum braking applied by ACC is limited; how- ever , the driver can always apply the brakes manually , if necessary . NOTE: The brake lights will illuminate whenever the ACC system applies the brakes. A Proximity W arning will alert the driver if ACC predicts that its maximum braking level is not sufficient to maintain the set distance. If th[...]

Adaptive Cruise Control (ACC) Menu The EVIC displays the current ACC system settings. The EVIC is located in the upper part of the instrument cluster between the speedometer and the tachometer . The information it displays depends on ACC system status. Menu Button Press the MENU button (located on the steer- ing wheel) repeatedly until one of the f[...]

The ACC screen will display once again if any ACC activity occurs, which may include any of the following: • Set Speed Change • Distance Setting Change • System Cancel • Driver Override • System Off • ACC Proximity W arning • ACC Unavailable W arning • The EVIC will return to the last display selected after five seconds of no ACC di[...]

The “Clean Radar Sensor In Front Of V ehicle” message can sometimes be displayed while driving in highly reflective areas (i.e. tunnels with r eflective tiles, or ice and snow). The ACC system will recover after the vehicle has left these areas. Under rar e conditions, when the radar is not tracking any vehicles or objects in its path this warn[...]

If weather conditions are not a factor , the driver should examine the sensor . It may requir e cleaning or r emoval of an obstruction. The sensor is located in the center of the vehicle behind the lower grille. T o keep the ACC System operating pr operly , it is impor- tant to note the following maintenance items: • Always keep the sensor clean.[...]

• Installing a snow plow , front-end protector , an after- market grille or modifying the grille is not recom- mended. Doing so may block the sensor and inhibit ACC operation. Removing ACC Sensor For Off-Roading NOTE: When off-r oading, it may be advisable to remove the ACC sensor . The sensor is located behind the front lower grille in the cente[...]

T o reinstall the sensor and bracket assembly reverse the process above. The fastener torque requir ed to assembly the bracket back to the beam is 6.6 ft lbs (9 N·m). ACC Unavailable W arning If the system turns off, and the EVIC displays “ACC/ FCW Unavailable, V ehicle System Err or”, there may be a temporary malfunction that limits ACC funct[...]

Offset Driving ACC may not detect a vehicle in the same lane that is offset from your direct line of travel. There will not be sufficient distance to the vehicle ahead. The offset vehicle may move in and out of the line of travel, which can cause your vehicle to brake or accelerate unexpectedly . T urns And Bends When driving on a curve with ACC en[...]

Using ACC On Hills When driving on hills, ACC may not detect a vehicle in your lane. Depending on the speed, vehicle load, traffic conditions, and the steepness of the hills, ACC perfor- mance may be limited. Lane Changing ACC will not detect a vehicle until it is completely in the lane in which you ar e traveling. In the illustration shown, ACC ha[...]

it is completely in the lane. There will not be sufficient distance to the lane-changing vehicle. Always be atten- tive and ready to apply the brakes if necessary . Narrow V ehicles Some narrow vehicles traveling near the outer edges of the lane or edging into the lane ar e not detected until they have moved fully into the lane. There will not be s[...]

Stationary Objects And V ehicles ACC does not react to stationary objects and stationary vehicles. For example, ACC will not react in situations where the vehicle you are following exits your lane and the vehicle ahead is stopped in your lane. Always be attentive and ready to apply the brakes if necessary . General Information FCC Requirements For [...]

W ARNING! In the normal Cruise Control mode, the system will not react to vehicles ahead. In addition, the proximity warning does not activate and no alarm will sound even if you are too close to the vehicle ahead since neither the presence of the vehicle ahead nor the vehicle-to-vehicle distance is detected. Be sure to maintain a safe distance bet[...]

T o Resume Press the RES + button and then remove your foot from the accelerator pedal. The EVIC will display the last set speed. T o T urn Off The system will turn off and erase the set speed in memory if: • Y ou push the ON/OFF button. • Y ou turn off the ignition. • Y ou engage Four-Wheel Drive Low . If the Cruise Contr ol system is turned[...]

system determines a collision with the vehicle in front of you is no longer probable, the warning message will be deactivated. NOTE: • The minimum speed for FCW activation is 10 mph (16 km/h). • When entering or driving in a curve, the FCW alerts may be triggered on objects other than vehicles such as guard rails or sign posts based on the cour[...]

Changing FCW Status The FCW feature can be set to far , set to near or turned of f in the Electr onic V ehicle Information Center (EVIC) refer to “Electronic V ehicle Information Center (EVIC)” in “Understanding Y our Instrument Panel” for further in- formation. The FCW Status Off, Near or Far will be displayed in the EVIC. FCW settings can[...]

Changing the FCW status to the “Near” setting, allows the system to warn you of a possible collision with the vehicle in front of you when you are much closer . This setting provides less reaction time than the “Far” setting, which allows for a more dynamic driving experience. Changing the FCW status to “Off” prevents the system from wa[...]

NOTE: • The system will retain the last setting selected by the driver after ignition shut down. • FCW will not react to irrelevant objects such as over- head objects, ground r eflections, objects not in the path of the car , stationary objects that are far away , oncom- ing traffic, or leading vehicles with the same or higher rate of speed. ?[...]

there is an internal system fault. Although the vehicle is still drivable under normal conditions, have the system checked by an authorized dealer . P ARKSENSE 姞 REAR P ARK ASSIST — IF EQUIPPED The ParkSense 威 Rear Park Assist system provides visual and audible indications of the distance between the r ear fascia and a detected obstacle when [...]

ParkSense 姞 W arning Display The ParkSense 威 W arning screen will only be displayed if Sound and Display is selected from the Customer- Pro- grammable Features section of the Electronic V ehicle Information Center (EVIC). Refer to “Electronic V ehicle Information Center (EVIC)/Personal Settings (Customer - Programmable Featur es)” in “Und[...]

ParkSense 姞 Display When the vehicle is in REVERSE, the warning display will turn ON indicating the system status. The system will indicate a detected obstacle by showing three solid arcs and will produce a one-half second tone. As the vehicle moves closer to the object the EVIC display will show fewer arcs and the sound tone will change from slo[...]

Slow T one Fast T one 3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 259 I n f o r m a t i o n P r o v i d e d b y :[...]

The vehicle is close to the obstacle when the EVIC display shows one flashing arc and sounds a continuous tone. The following chart shows the warning alert operation when the system is detecting an obstacle: Continuous T one 260 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE I n f o r m a t i o n P r o v i d e d b y :[...]

W ARNING ALER TS Rear Distance (in/cm) Greater than 79 in (200 cm) 79-39 in (200-100 cm) 39-25 in (100-65 cm) 25-12 in (65-30 cm) Less than 12 in (30 cm) Audible Alert Chime None Single 1/2 Second T one Slow Fast Continuous Arcs None 3 Solid (Continuous) 3 Slow Flashing 2 Slow Flashing 1 Slow Flashing Radio Mute No Y es Y es Y es Y es NOTE: ParkSen[...]

“Electronic V ehicle Information Center (EVIC)” in “Un- derstanding Y our Instrument Panel” for further informa- tion. When the shift lever is moved to REVERSE and the system is disabled, the EVIC will display the “P ARK ASSIST SYSTEM OFF” message for as long as the vehicle is in REVERSE. The ParkSense 威 switch LED will be ON when Par[...]

ParkSense 姞 System Usage Precautions NOTE: • Ensure that the r ear bumper is free of snow , ice, mud, dirt and debris to keep the ParkSense 威 system operat- ing properly . • Jackhammers, large trucks, and other vibrations could affect the performance of ParkSense 威 . • When you turn ParkSense 威 off, the instrument cluster will display[...]

• On vehicles equipped with a tailgate, ParkSense 威 should be disabled when the tailgate is in the lower ed or open position and the vehicle is in REVERSE. A lowered tailgate could provide a false indication that an obstacle is behind the vehicle. CAUTION! • ParkSense 威 is only a parking aid and it is unable to recognize every obstacle, inc[...]

W ARNING! (Continued) • Before using the Rear Park Assist system, it is strongly recommended that the ball mount and hitch ball assembly is disconnected from the ve- hicle when the vehicle is not used for towing. Failure to do so can result in injury or damage to vehicles or obstacles because the hitch ball will be much closer to the obstacle tha[...]

When displayed, static grid lines will illustrate the width of the vehicle while a dashed center-line will indicate the center of the vehicle to assist with aligning to a hitch/ receiver . The static grid lines will show separate zones that will help indicate the distance to the rear of the vehicle. The following table shows the approximate distanc[...]

CAUTION! • T o avoid vehicle damage, ParkV iew 威 should only be used as a parking aid. The ParkV iew 威 camera is unable to view every obstacle or object in your drive path. • T o avoid vehicle damage, the vehicle must be driven slowly when using ParkV iew 威 to be able to stop in time when an obstacle is seen. It is recom- mended that the [...]

OVERHEAD CONSOLE The overhead console contains courtesy/reading lights and storage for sunglasses. Universal Garage Door Opener (HomeLink 威 ), power liftgate and power sunr oof switches may also be included, if equipped. Front Map/Reading Lights Lights are mounted in the overhead console. Each light can be turned on by pressing the switch on eith[...]

T o turn the lights off, press the switch a second time. The lights also turn on when a door is opened. The lights will also turn on when the UNLOCK button on the RKE is pressed. Courtesy Lights The courtesy lights can be turned on by pressing the top corner of the lens. T o turn the lights off, pr ess the lens a second time. Courtesy Lights 3 UNDE[...]

Sunglasses Bin Door At the front of the console a compartment is pr ovided for the storage of a pair of sunglasses. The storage compart- ment access is a “push/push” design. Push the chrome pad on the door to open. Push the chrome pad on the door to close. GARAGE DOOR OPENER — IF EQUIPPED HomeLink 威 replaces up to three hand-held transmitte[...]

NOTE: HomeLink 威 is disabled when the V ehicle Secu- rity Alarm is active. HomeLink 威 Buttons/Overhead Consoles HomeLink 威 Buttons/Sunvisor/Headliner 3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 271 I n f o r m a t i o n P r o v i d e d b y :[...]

Before Y ou Begin Programming HomeLink 姞 Be sure that your vehicle is parked outside of the garage before you begin programming. For more efficient programming and accurate transmis- sion of the radio-frequency signal it is recommended that a new battery be placed in the hand-held transmitter of the device that is being programmed to the HomeLink[...]

1. Cycle the ignition to the ON/RUN position. 2. Place the hand-held transmitter 1 to 3 in (3 to 8 cm) away from the HomeLink 威 button you wish to program while keeping the HomeLink 威 indicator light in view . 3. Simultaneously press and hold both the HomeLink 威 button you want to program and the hand-held trans- mitter button. 4. Continue to[...]

5. At the garage door opener motor (in the garage), locate the “LEARN” or “TRAINING” button. This can usually be found where the hanging antenna wire is attached to the garage door opener/device motor . Firmly press and release the “LEARN” or “TRAIN- ING” button. On some garage door openers/devices there may be a light that blinks w[...]

1. Cycle the ignition to the ON/RUN position. 2. Place the hand-held transmitter 1 to 3 in (3 to 8 cm) away from the HomeLink 威 button you wish to program while keeping the HomeLink 威 indicator light in view . 3. Simultaneously press and hold both the HomeLink 威 button you want to program and the hand-held trans- mitter button. 4. Continue to[...]

Canadian/Gate Operator Programming For programming transmitters in Canada/United States that require the transmitter signals to “time-out” after several seconds of transmission. Canadian radio frequency laws requir e transmitter sig- nals to time-out (or quit) after several seconds of trans- mission – which may not be long enough for HomeLink[...]

• T o program the two remaining HomeLink 威 buttons, repeat each step for each r emaining button. DO NOT erase the channels. If you unplugged the garage door opener/device for programming, plug it back in at this time. Reprogramming A Single HomeLink 威 Button T o r eprogram a channel that has been previously trained, follow these steps: 1. Cyc[...]

T roubleshooting Tips If you are having tr ouble pr ogramming HomeLink 威 , her e are some of the most common solutions: • Replace the battery in the original hand-held transmitter . • Press the LEARN button on the Garage Door Opener to complete the training for a Rolling Code. • Did you unplug the device for programming and remember to plug[...]

General Information This device complies with FCC rules Part 15 and Industry Canada RSS-210. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference that may be received including interference that may cause unde- sired operation. NOTE: • The transmitter [...]

POWER SUNROOF — IF EQUIPPED The power sunroof switch is located between the sun visors on the overhead console. W ARNING! • Never leave children in a vehicle with the key in the ignition switch (or with the ignition in the Accessory or Run position, for vehicles equipped with Keyless Enter-N-Go™). Occupants, particu- larly unattended children[...]

Opening Sunroof — Express Press the switch rearwar d and release it within one-half second and the sunr oof will open automatically fr om any position. The sunroof will open fully and stop automati- cally . This is called “Express Open”. During Express Open operation, any movement of the sunroof switch will stop the sunroof. Opening Sunroof ?[...]

NOTE: If three consecutive sunr oof close attempts result in Pinch Protect reversals, the fourth close attempt will be a Manual Close movement with Pinch Protect disabled. V enting Sunroof — Express Press and r elease the V ent button within one half second and the sunroof will open to the vent position. This is called “Expr ess V ent”, and i[...]

Ignition OFF Operation The power sunroof switches remain active for up to approximately ten minutes after the ignition switch has been turned OFF . Opening either front door will cancel this feature. The time is programmable. Refer to “Elec- tronic V ehicle Information Center (EVIC)/Personal Set- tings (Customer-Pr ogrammable Features)” in “U[...]

W ARNING! • Never leave children in a vehicle with the key in the ignition switch (or with the ignition in the Accessory or Run position, for vehicles equipped with Keyless Enter-N-Go™). Occupants, particu- larly unattended children, can become entrapped by the power sunroof while operating the power sunroof switch. Such entrapment may result i[...]

position. The sunroof will close fully and stop automati- cally . This is called “Express Close”. During Express Close operation, any movement of the switch will stop the sunroof. Closing Sunroof — Manual Mode T o close the sunroof, press and hold the switch in the forward position. Any r elease of the switch will stop the movement and the su[...]

Pinch Protect Feature This feature will detect an obstruction in the opening of the sunr oof during Express Close operation. If an ob- struction in the path of the sunroof is detected, the sunroof will automatically retract. Remove the obstruc- tion if this occurs. Next, press the switch forward and release to Express Close. NOTE: If three consecut[...]

Ignition OFF Operation The power sunroof switches can be programmed to remain active for up to approximately ten minutes after the ignition switch has been turned OFF . Refer to “Elec- tronic V ehicle Information Center (EVIC)/Customer- Programmable Features (System Setup)” in “Under- standing Y our Instrument Panel” for further information[...]

CAUTION! Power outlets are designed for accessory plugs only . Do not insert any other object in the power outlets as this will damage the outlet and blow the fuse. Improper use of the power outlet can cause damage not covered by your New V ehicle Limited W arranty . The front power outlet is located inside the storage area on the center stack of t[...]

The rear power outlet is located in the right rear cargo area. Center Console Outlet Rear Power Outlet 3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 289 I n f o r m a t i o n P r o v i d e d b y :[...]

NOTE: The rear power outlet can be switched to “bat- tery” powered all the time by switching the power outlet right rear quarter panel fuse in the fuse panel. Power Outlet Right Rear Quarter Panel Fuse Power Outlet Fuse Locations 1 — M7 Fuse 20 A Y ellow Power Outlet Right Rear Quarter Panel 2 — M6 Fuse 20 A Y ellow Cigar Lighter Instrument[...]

W ARNING! T o avoid serious injury or death: • Only devices designed for use in this type of outlet should be inserted into any 12 V olt outlet. • Do not touch with wet hands. • Close the lid when not in use and while driving the vehicle. • If this outlet is mishandled, it may cause an electric shock and failure. CAUTION! • Many accessori[...]

POWER INVERTER — IF EQUIPPED There is a 1 15 V olt, 150 W att inverter outlet located on the back of the center console to convert DC current to AC current. This outlet can power cellular phones, electron- ics and other low power devices requiring power up to 150 W atts. Certain high-end video games, such as Play- station3 and XBox360 will exceed[...]

may have to be reset manually . T o reset the inverter manually press the power inverter button OFF and ON. T o avoid overloading the circuit, check the power ratings on electrical devices prior to using the inverter . The power inverter switch is located on the switch bank below the Climate Con- trols. T o turn on the power outlet, press the switc[...]

CUPHOLDERS There are two cupholders for the front seat passengers located in the center console. There are two cupholders for the rear seat passengers located in the fold-down center armrest. Front Cupholders Rear Cupholders 294 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE I n f o r m a t i o n P r o v i d e d b y :[...]

STORAGE Glove Compartment The glove compartment is located on the right side of the instrument panel. T o open the glove compartment, pull outwar d on the latch and lower the glove box door . Glove Compartment Opened Glove Compartment 3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 295 I n f o r m a t i o n P r o v i d e d b y :[...]

Door Storage Large storage ar eas are built into the door panels for easy access. Center Console The center console contains both an upper and a lower storage area. T o open the upper storage compartment, pull upward on the small latch located on the lid. Door Panel Storage Storage Compartment 296 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE I n f [...]

Lift upwar d on the lar ger of the latches to access the lower storage compartment. W ARNING! Do not operate this vehicle with a console compart- ment lid in the open position. Cellular phones, music players, and other handheld electronic devices (Continued) Storage Compartment Latches Lower Storage Compartment 3 UNDERST ANDING THE FEA TURES OF YOU[...]

W ARNING! (Continued) should be stowed while driving. Use of these devices while driving can cause an accident due to distrac- tion, resulting in death or injury . CARGO AREA FEA TURES Rechargeable Flashlight The rechargeable flashlight is mounted on the left side of the cargo area. The flashlight snaps out of the bezel when needed. The flashlight [...]

Cargo Storage Bins There are four removable storage bins located in the rear cargo area. There are two storage bins located on either side of the cargo area. Three-Press Switch Rear Storage Bins 3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 299 I n f o r m a t i o n P r o v i d e d b y :[...]

T wo additional storage bins are located under the load floor . T o access the lower storage bins, raise the load floor and attach the tether hook (attached to the bottom of the load floor) to the liftgate opening. T ether Strap Lower Storage Bins 300 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE I n f o r m a t i o n P r o v i d e d b y :[...]

Retractable Cargo Area Cover — If Equipped NOTE: The purpose of this cover is for privacy , not to secure loads. It will not prevent cargo from shifting or protect passengers from loose cargo. T o cover the cargo area: 1. Grasp the cover at the center handle. Pull it over the cargo area. 2. Insert the pins on the ends of the cover into the slots [...]

W ARNING! (Continued) cover on the cargo floor or in the passenger compart- ment. Remove the cover from the vehicle when taken from its mounting. Do not store it in the vehicle. Rear Cargo Tie-Downs The rear cargo tie-downs, located on the cargo area floor , should be used to safely secure loads when the vehicle is moving. Rear Cargo T ie-Downs 302[...]

W ARNING! • T o help protect against personal injury , passengers should not be seated in the rear cargo area. The rear cargo space is intended for load carrying purposes only , not for passengers, who should sit in seats and use seat belts. • Cargo tie-down hooks are not safe anchors for a child seat tether strap. In a sudden stop or accident,[...]

REAR WINDOW FEA TURES Rear Window Wiper/W asher The rear wiper/washer controls are located on the mul- tifunction lever on the left side of the steering column. The r ear wiper/washer is operated by rotating a switch, located at the middle of the lever . Rotate the center portion of the lever upward to the first detent for intermittent operation an[...]

Rotating the center portion upward once more will activate the washer pump which will con- tinue to operate as long as the switch is held. Upon release of the switch, the wipers will resume the continuous rear wiper operation. When this rotary con- trol is in the OFF position, rotating it downward will activate the rear washer pump which will conti[...]

CAUTION! Failure to follow these cautions can cause damage to the heating elements: • Use care when washing the inside of the rear window . Do not use abrasive window cleaners on the interior surface of the window . Use a soft cloth and a mild washing solution, wiping parallel to the heating elements. Labels can be peeled off after soaking with w[...]

desired position, keeping the cr ossbars parallel to the rack frame. Once the crossbar is in the desired position, retighten the with the wrench to lock the crossbar into position. NOTE: • T o help control wind noise when the crossbars are not in use, place the front and rear crossbars appr oxi- mately 24 in (61 cm) apart. Optimal noise reduction[...]

CAUTION! (Continued) • T ravel at reduced speeds and turn corners carefully when carrying large or heavy loads on the roof rack. Wind forces, due to natural causes or nearby truck traffic, can add sudden upward lift to a load. This is especially true on large flat loads and may result in damage to the cargo or your vehicle. W ARNING! Cargo must b[...]

UNDERST ANDING YOUR INSTRUMENT P ANEL CONTENTS 䡵 INSTRUMENT P ANEL FEA TURES ......... .313 䡵 INSTRUMENT CLUSTER — PREMIUM ...... .314 䡵 INSTRUMENT CLUSTER DESCRIPTIONS .... .315 䡵 ELECTRONIC VEHICLE INFORMA TION CENTER (EVIC) ...................... .325 ▫ Electronic V ehicle Information Center (EVIC) Displays ..........................[...]

▫ Keyless Enter-N-Go™ Display — If Equipped ........................ .347 ▫ Compass / T emperatur e Display ......... .347 ▫ Customer-Programmable Featur es (System Setup) ...................... .350 䡵 UCONNECT 威 730N/430/430N CD/DVD/HDD/ NA V — IF EQUIPPED .................. .359 ▫ Operating Instructions (V oice Command System) ?[...]

▫ Connecting The iPod 威 Or External USB Device ............................ .385 ▫ Using This Feature .................... .386 ▫ Controlling The iPod 威 Or External USB Device Using Radio Buttons .................. .387 ▫ Play Mode ......................... .387 ▫ List Or Browse Mode .................. .388 ▫ Bluetooth Streaming Aud[...]

▫ System Information ................... .413 䡵 STEERING WHEEL AUDIO CONTROLS — IF EQUIPPED .......................... .428 ▫ Radio Operation ..................... .429 ▫ CD Player .......................... .430 䡵 CD/DVD DISC MAINTENANCE .......... .430 䡵 RADIO OPERA TION AND MOBILE PHONES . .431 䡵 CLIMA TE CONTROLS ...............[...]

INSTRUMENT P ANEL FEA TURES 1 — Air Outlet 6 — Lower Switch Bank 1 1 — Hood Release 2 — Instrument Cluster 7 — Hazard Switch 12 — Fuel Door Release 3 — Radio 8 — Storage Bin 13 — Headlight Switch 4 — Glove Compartment 9 — ESC Button 14 — Dimmer Control 5 — Climate Controls 10 — Ignition Switch 4 UNDERST ANDING YOUR INSTR[...]

INSTRUMENT CLUSTER — PREMIUM 314 UNDERST ANDING YOUR INSTRUMENT P ANEL I n f o r m a t i o n P r o v i d e d b y :[...]

INSTRUMENT CLUSTER DESCRIPTIONS 1. T achometer Indicates the engine speed in revolutions per minute (RPM x 1000). 2. Air Bag W arning Light This light will turn on for four to eight seconds as a bulb check when the ignition switch is first turned to the ON/RUN position. If the light is either not on during starting, stays on, or turns on while driv[...]

CAUTION! Prolonged driving with the MIL on could cause damage to the engine control system. It also could affect fuel economy and drivability . If the MIL is flashing, severe catalytic converter damage and power loss will soon occur . Immediate service is required. W ARNING! A malfunctioning catalytic converter , as referenced above, can reach high[...]

Each time the ignition is turned to ON/RUN, the ESC system will be ON, even if it was turned off previously . The ESC system will make buzzing or clicking sounds when it is active. This is normal; the sounds will stop when ESC becomes inactive following the maneuver that caused the ESC activation. 5. TOW/HAUL Indicator Light — If Equipped This li[...]

10. Electronic V ehicle Information Center (EVIC) Display/Odometer Display The odometer display shows the total distance the ve- hicle has been driven. U.S. Federal regulations r equire that upon transfer of vehicle ownership, the seller certify to the purchaser the correct mileage that the vehicle has been driven. If your odometer needs to be repa[...]

Accordingly , when the low tire pressure telltale illumi- nates, you should stop and check your tires as soon as possible, and inflate them to the pr oper pressur e. Driving on a significantly under-inflated tire causes the tir e to overheat and can lead to tire failure. Under-inflation also reduces fuel efficiency and tire tread life, and may affe[...]

CAUTION! (Continued) equipped on your vehicle. Undesirable system opera- tion or sensor damage may result when using re- placement equipment that is not of the same size, type, and/or style. Aftermarket wheels can cause sensor damage. Do not use tire sealant from a can or balance beads if your vehicle is equipped with a TPMS, as damage to the senso[...]

System (ABS) / Electr onic Stability Control (ESC) system. In this case, the light will remain on until the condition has been corrected. If the problem is related to the brake booster , the ABS pump will run when applying the brake and a brake pedal pulsation may be felt during each stop. The dual brake system provides a reserve braking capac- ity[...]

The light also will turn on when the parking brake is applied with the ignition switch in the ON/RUN position. NOTE: This light shows only that the parking brake is applied. It does not show the degree of brake application . 15. Anti-Lock Brake (ABS) Light This light monitors the Anti-Lock Brake System (ABS). The light will turn on when the ignitio[...]

17. Speedometer Indicates vehicle speed. 18. Fuel Door Reminder The fuel pump symbol points to the side of the vehicle where the fuel door is located. 19. Fuel Gauge The pointer shows the level of fuel in the fuel tank when the ignition switch is in the ON/RUN position. 20. Electronic V ehicle Information Center (EVIC) White T elltale Area This are[...]

24. V ehicle Security Light This light will flash rapidly for approximately 15 seconds when the vehicle theft alarm is arming. The light will flash at a slower speed continuously after the alarm is set. The security light will also come on for about three seconds when the ignition is first turned on. 25. T emperature Gauge The temperature gauge sho[...]

W ARNING! A hot engine cooling system is dangerous. Y ou or others could be badly burned by steam or boiling coolant. Y ou may want to call an authorized dealer for service if your vehicle overheats. If you decide to look under the hood yourself, see “Maintaining Y our V ehicle”. Follow the warnings under the Cooling System Pressure Cap paragra[...]

The system allows the driver to select information by pressing the following buttons mounted on the steering wheel: UP Button Press and r elease the UP button to scroll up- ward through the main menus (Fuel Economy , V ehicle Info, T ire PSI, Cruise, Messages, Units, System Setup, V ehicle Speed, T rip Info, T urn Menu Off and sub-menus. DOWN Butto[...]

BACK Button Press the BACK button to scroll back to a previous menu or sub-menu. Electronic V ehicle Information Center (EVIC) Displays The EVIC display consists of three sections: 1. The top line where compass direction, odometer line and outside temperature are displayed. 2. The main display area where the menus and pop up messages are displayed.[...]

• Unstored Messages This message type is displayed indefinitely or until the condition that activated the message is clear ed. Examples of this message type are “T urn Signal On” (if a turn signal is left on) and “Lights On” (if driver leaves the vehicle). • Unstored Messages Until RUN These messages deal primarily with the Remote Start[...]

• Left front turn signal lamp out • Right front turn signal lamp out • Left rear turn signal lamp out • Right rear turn signal lamp out • Low T ire Pressur e • ESC System Off • Service blind spot system • Blind spot detection unavailable • Blind spot system off • Blind spot system unavailable sensor blocked • Normal Cruise Rea[...]

• Driver Override — If you apply the accelerator after setting the desired speed in the ACC system. Refer to “Adaptive Cruise Control (ACC)” in “Understanding The Features Of Y our V ehicle” (if equipped). • Distance Set — After changing the desired following distance in the ACC system, this message will display momentarily . Refer [...]

• Coolant low • Service air suspension system • Oil change due • Key in ignition • Lights on • Key in Ignition Lights On • Ignition or Accessory On • Ignition or Accessory On. Lights On • T urn signal on • Park assist on • W arning object detected • Remote start aborted — Door ajar • Remote start aborted — Hood ajar ?[...]

• Function currently unavailable — Power Liftgate • Unlock to operate — Power Liftgate • Put in Park to operate — Power Liftgate • Automatic high beams on • Automatic high beams off • Service Four Wheel Drive System • ECO — Fuel Saver Indicator • T errain Settings — Automatic • T errain Settings — Rock • T errain Set[...]

• Off Road Ride Height Level 2 — This message is displayed (for 5 seconds) when the vehicle has achieved the Off Road Height Level 2. • V ehicle Lowered T o Entry/Exit (Park) Height — This message is displayed (for 5 seconds) when the vehicle has achieved the Park Height. • Entry/Exit (Park) Height in Pr ogress — This message is display[...]

• V ehicle Cannot Be Lowered – Door Open — This message is displayed if a door or the liftgate is ajar and level control is suspended. • Air Suspension T emporarily Disabled For Jacking And T ire Change • Aerodynamic Ride Height — This is displayed (for 5 seconds) when the vehicle has achieved the Aerody- namic Height. EVIC White T ellt[...]

• Adaptive Cruise Control (ACC) ON This light will turn on when the ACC is ON. For further information, refer to “Adaptive Cruise Control (ACC)” in “Understanding The Features Of Y our V ehicle.” • Adaptive Cruise Control (ACC) SET This light will turn on when the ACC is SET . For further information, refer to “Adaptive Cruise Control[...]

EVIC Amber T elltale Lights This area will show reconfigurable amber caution tell- tales. These telltales include: • Forward Collision W arning (FCW) OFF This light warns the driver of a potential colli- sion with the vehicle in front and pr ompts the driver to take action in order to avoid the collision. For further information, refer to “Adap[...]

A loose, improperly installed, or damaged fuel filler cap may also turn on the Malfunction Indicator Light (MIL). • Windshield W asher Fluid Low Indicator This light will turn on to indicate the wind- shield washer fluid is low . • SER V 4WD The SER V 4WD light monitors the electric shift 4WD system. If the SER V 4WD light stays on or comes on [...]

• Oil Pressure W arning Light This telltale indicates low engine oil pressure. If the light turns on while driving, stop the vehicle and shut off the engine as soon as possible. A chime will sound for four minutes when this light turns on. Do not operate the vehicle until the cause is corrected. This light does not show how much oil is in the eng[...]

requir ed. Y ou may experience reduced performance, an elevated/rough idle or engine stall and your vehicle may requir e towing. • Engine T emperatur e W arning Light This light warns of an overheated engine condi- tion. As temperatures rise and the gauge ap- proaches H, this indicator will illuminate and a single chime will sound after reaching [...]

W ARNING! If the T ransmission T emperature W arning Light is illuminated and you continue operating the vehicle, in some circumstances you could cause the fluid to boil over , come in contact with hot engine or exhaust components and cause a fire. Engine Oil Change Indicator System Oil Change Due Y our vehicle is equipped with an engine oil change[...]

V ehicles Not Equipped W ith Keyless Enter-N-Go™ 1. T urn the ignition switch to the ON/RUN position (Do not start the engine.) 2. Fully depress the accelerator pedal, slowly , thr ee times within 10 seconds. 3. T urn the ignition switch to the OFF/LOCK position. NOTE: If the indicator message illuminates when you start the vehicle, the oil chang[...]

(MDS) (if equipped) allows the engine to operate on four cylinders, or if you are driving in a fuel efficient manner . This feature allows you to monitor when you are driving in a fuel efficient manner , and it can be used to modify driving habits in order to increase fuel economy . Distance T o Empty (DTE) Shows the estimated distance that can be [...]

Cruise Control Press and r elease the UP or DOWN button until “ACC” (if equipped with Adaptive Cruise Control) or “Cruise” is highlighted in the EVIC. Status of the ACC or Cruise is displayed in the menu line also. Press and release the SELECT (right arr ow) button to display the following information: • If equipped with ACC, one of sever[...]

T rip Info T rip A Shows the total distance traveled for T rip A since the last reset. T rip B Shows the total distance traveled for T rip B since the last reset. Elapsed T ime Shows the total elapsed time of travel since the last reset when the ignition switch is in the ACC position. Elapsed time will increment when the ignition switch is in the O[...]

V ehicle Info (Customer Information Features) Press and release the UP or DOWN button until “V ehicle Info” displays in the EVIC and press the SELECT button. Press the UP and DOWN button to scroll thr ough the available information displays, then press SELECT to display any one of the following choices. • Coolant T emp Displays the actual coo[...]

• T ire Pressur e Monitor System (shows the current pres- sure of all four road tires). For additional information, refer to “T ire Pressure Monitor System” in “Starting And Operating”. NOTE: • T ires heat up during normal driving conditions. Heat will cause the tire pressur e to increase from 2 to 6 psi (14 to 41 kPa) during normal dri[...]

than one message to step through the remaining stored messages. Pressing the BACK button takes you back to the Main Menu. T urn Menu OFF Select from Main Menu using the DOWN button. Press- ing the SELECT button blanks the menu display . Pressing any one of the four steering wheel buttons brings the menu back. Keyless Enter-N-Go™ Display — If Eq[...]

new , the compass may appear erratic and the EVIC will display CAL until the compass is calibrated. Y ou may also calibrate the compass by completing one or more 360–degree turns (in an area free from large metal or metallic objects) until the CAL indicator displayed in the EVIC turns off. The compass will now function normally . NOTE: A good cal[...]

1. T urn the ignition switch ON. 2. Press the UP or DOWN button until the Setup (Customer-Pr ogrammable Features) menu is reached, then press the SELECT button. 3. Press the DOWN button until the “Compass V ariance” message is displayed in the EVIC, then press the SELECT button. The last variance zone number dis- plays in the EVIC. 4. Press and[...]

1. T urn ON the ignition switch. 2. Press the UP or DOWN button until the Setup (Customer-Pr ogrammable Features) menu is reached, then press the SELECT button. 3. Press the DOWN button until “Calibrate Compass” is displayed in the EVIC. 4. Press and release the SELECT button to start the calibration. The “CAL” indicator will be displayed i[...]

to select English, Spanish (Español), French (Français), Italian (Italiano), German (Deutsch), and Dutch (Neder- lands). Then, as you continue, the information will dis- play in the selected language. Nav–T urn By T urn When this feature is selected, the navigation system utilizes voice commands, guiding through the drive route, mile by mile, t[...]

NOTE: If the vehicle is equipped with Keyless Enter-N- Go™ (Passive Entry) and the EVIC is programmed to Unlock All Doors 1st Press, all doors will unlock no matter which Passive Entry equipped door handle is grasped. If Driver Door 1st Press is programmed, only the driver ’s door will unlock when the driver ’s door is grasped. W ith Passive [...]

a check-mark appears next to the feature showing the system has been activated or the check-mark is r emoved showing the system has been deactivated. Horn W ith Remote Lock When this feature is selected, a short horn sound will occur when the RKE transmitter LOCK button is pr essed. This feature may be selected with or without the “Flash Lamps wi[...]

then press and release the SELECT button until a check- mark appears next to the setting, showing that the setting has been selected. Headlamps W ith W ipers (A vailable with Automatic Headlamps Only) When this feature is selected, and the headlight switch is in the AUTO position, the headlights will turn on ap- proximately 10 seconds after the wip[...]

REVERSE position. The mirrors will move back to their previous position when the transmission is shifted out of REVERSE. T o make your selection, press and release the SELECT button until a check-mark appears next to the feature showing the system has been activated or the check-mark is r emoved showing the system has been deactivated. Key-Off Powe[...]

or unlock buttons. T o make your selection, press and release the SELECT button until a check-mark appears next to the featur e showing the system has been activated or the check-mark is removed showing the system has been deactivated. Refer to “Keyless Enter-N-Go™” in “Things T o Know Before Starting Y our V ehicle”. Auto High Beams (A v[...]

Blind Spot Alert There are thr ee selections when operating Blind Spot Alert. By pressing and releasing the SELECT button once, the Blind Spot Alert feature can be activated in “Blind Spot: Lights Only” mode. When this mode is selected the Blind Spot Monitor (BSM) system is activated and will only show a visual alert in the outside mirrors. By [...]

and release the SELECT button until a check-mark ap- pears next to the feature showing the system has been activated or the check-mark is r emoved showing the system has been deactivated. For further information, refer to ”Adaptive Cruise Con- trol (ACC)” in “Understanding The Features Of Y our V ehicle.” Park Assist System The Rear Park As[...]

Calibrate Compass Refer to “Compass Display” for more information. Compass V ariance Refer to “Compass Display” for more information. UCONNECT 姞 730N/430/430N CD/DVD/HDD/NA V — IF EQUIPPED Refer to your Uconnect 威 730N, 430 or 430N user’s manual for detailed operating instructions. Operating Instructions (V oice Command System) — [...]

Power Switch/V olume Control (Rotary) Push the ON/VOLUME control knob to turn on the radio. Push the ON/VOLUME control knob a second time to turn off the radio. Electronic V olume Control The electronic volume control turns continuously (360 degrees) in either direction, without stopping. T urn- ing the ON/VOLUME control knob to the right increases[...]

R W/FF Pressing the R W (Rewind) or FF (Fast Forward) buttons causes the tuner to search for the next frequency in the direction of the arrows. This feature operates in either AM or FM frequencies. TUNE Control T urn the rotary TUNE/SCROLL control knob clockwise to incr ease or counterclockwise to decr ease the fr equency . Setting the T one, Balan[...]

AM/FM Button Press the buttons to select either AM or FM mode. SET/RND Button — T o Set the Pushbutton Memory When you are receiving a station that you wish to commit to pushbutton memory , press the SET/RND button. The symbol SET 1 will now show in the display window . Select the button (1 to 6) you wish to lock onto this station and pr ess and [...]

Operation Instructions — CD MODE For CD And MP3 Audio Play NOTE: • The ignition switch must be in the ON or ACC position to operate the radio. • This radio is capable of playing compact discs (CD), recor dable compact discs (CD-R), rewritable compact discs (CD-RW), compact discs with MP3 tracks and multisession compact discs with CD and MP3 t[...]

SEEK Button Press the right SEEK button for the next selection on the CD. Press the left SEEK button to return to the beginning of the current selection, or return to the beginning of the previous selection if the CD is within the first second of the current selection. Pressing and holding the SEEK button will allow faster scrolling through the tra[...]

Supported Media (Disc T ypes) The MP3 file recor ding media supported by the radio are CDDA, CD-R, CD-RW , MP3, and CDDA+MP3. Supported Medium Formats (File Systems) The medium formats supported by the radio are ISO 9660 Level 1 and Level 2 and includes the Joliet extension. When reading discs recorded using formats other than ISO 9660 Level 1 and [...]

Supported MP3 File Formats The radio will recognize only files with the *.MP3 exten- sion as MP3 files. Non-MP3 files named with the *.MP3 extension may cause playback problems. The radio is designed to recognize the file as an invalid MP3 and will not play the file. When using the MP3 encoder to compress audio data to an MP3 file, the bit rate and[...]

Playback of MP3 Files When a medium containing MP3 data is loaded, the radio checks all files on the medium. If the medium contains a lot of folders or files, the radio will take more time to start playing the MP3 files. Loading times for playback of MP3 files may be affected by the following: • Media - CD-RW media may take longer to load than CD[...]

NOTE: The AUX device must be turned on and the device’s volume set to proper level. If the AUX audio is not loud enough, turn the device’s volume up. If the AUX audio sounds distorted, turn the device’s volume down. TIME Button (Auxiliary Mode) Press this button to change the display to time of day . The time of day will display for five seco[...]

Operating Instructions — Radio Mode NOTE: The ignition switch must be in the ON/RUN or ACC position to operate the radio. Power Switch/V olume Control (Rotary) Push the ON/VOLUME control knob to turn on the radio. Push the ON/VOLUME control knob a second time to turn off the radio. Electronic V olume Control The electronic volume control turns co[...]

If your vehicle is not equipped with or this featur e is not available on your vehicle, a “Not Equipped W ith Uconnect Phone” message will display on the radio screen. TIME Button Press the TIME button to alternate display of the time and radio frequency . Clock Setting Procedure 1. Press and hold the TIME button until the hours blink. 2. Adjus[...]

R W/FF Pressing the R W (Rewind) or FF (Fast Forward) buttons causes the tuner to search for the next frequency in the direction of the arrows. This feature operates in either AM or FM frequencies. TUNE Control T urn the rotary TUNE/SCROLL control knob clockwise to incr ease or counterclockwise to decr ease the fr equency . Setting the T one, Balan[...]

or turning the TUNE/SCROLL control knob within five seconds will allow the program format type to be se- lected. Many radio stations do not currently br oadcast Music T ype information. T oggle the MUSIC TYPE button to select the following format types: Program T ype 16-Digit Character Display No program type or undefined None Adult Hits Adlt Hit C[...]

Program T ype 16-Digit Character Display Sports Sports T alk T alk T op 40 T op 40 W eather W eather By pressing the SEEK button when the Music T ype icon is displayed, the radio will be tuned to the next frequency station with the same selected Music T ype name. The Music T ype function only operates when in the FM mode. If a preset button is acti[...]

button. The symbol SET 1 will now show in the display window . Select the button (1–6) you wish to lock onto this station and press and release that button. If a button is not selected within five seconds after pressing the SET/ RND button, the station will continue to play but will not be stored into pushbutton memory . Y ou may add a second sta[...]

Inserting Compact Disc(s) Gently insert one CD into the CD player with the CD label facing up. The CD will automatically be pulled into the CD player and the CD icon will illuminate on the radio display . If a CD does not go into the slot more than 1.0 in (2.5 cm), a disc may already be loaded and must be ejected before a new disc can be loaded. If[...]

A disc can be ejected with the radio and ignition OFF . NOTE: Ejecting with the ignition OFF is not allowed on convertible or soft-top models (if equipped). SEEK Button Press the right SEEK button for the next selection on the CD. Press the left SEEK button to return to the beginning of the current selection, or return to the beginning of the previ[...]

Notes On Playing MP3 Files The radio can play MP3 files; however , acceptable MP3 file recor ding media and formats are limited. When writing MP3 files, pay attention to the following restrictions. Supported Media (Disc T ypes) The MP3 file recor ding media supported by the radio are CDDA, CD-R, CD-RW , MP3, and CDDA+MP3. Supported Medium Formats ([...]

Multisession disc formats are supported by the radio. Multisession discs may contain combinations of normal CD audio tracks and computer files (including MP3 files). Discs cr eated with an option such as ⬙ keep disc open after writing ⬙ are most likely multisession discs. The use of multisession for CD audio or MP3 playback may result in longer[...]

Playback of MP3 Files When a medium containing MP3 data is loaded, the radio checks all files on the medium. If the medium contains a lot of folders or files, the radio will take more time to start playing the MP3 files. Loading times for playback of MP3 files may be affected by the following: • Media - CD-RW media may take longer to load than CD[...]

Press and hold the INFO button again for three seconds to return to ⬙ elapsed time ⬙ display . Operation Instructions - Auxiliary Mode The auxiliary (AUX) jack is an audio input jack which allows the user to plug in a portable device such as an MP3 player or cassette player and utilize the vehicle’s audio system to amplify the source and play[...]

System Activation Sirius Satellite Radio service is pr e-activated, and you may begin listening immediately to the one year of audio service that is included with the factory-installed satellite radio system in your vehicle. Sirius will supply a wel- come kit that contains general information, including how to setup your on-line listening account. [...]

decreased performance. Larger luggage items such as bikes should be placed as far rearwar d as possible, within the loading design of the rack. Do not place items directly on or above the antenna. Reception Quality Satellite reception may be interrupted due to one of the following reasons: • The vehicle is parked in an undergr ound parking struct[...]

INFO Button Pressing the INFO button will cycle the display informa- tion between Artist, Song T itle, and Composer (if avail- able). Also, pressing and holding the INFO button for an additional thr ee seconds will make the radio display the Song T itle all of the time (press and hold again to return to normal display). R W/FF Pressing the R W (Rew[...]

SETUP Button Pressing the SETUP button allows you to select the following items: • Display Sirius ID number — Pr ess the AUDIO/ SELECT button to display the Sirius ID number . This number is used to activate, deactivate, or change the Sirius subscription. SET Button – T o Set the Pushbutton Memory When you are receiving a channel that you wis[...]

iPod 姞 /USB/MP3 CONTROL — IF EQUIPPED This feature allows an iPod 威 or external USB device to be plugged into the USB port, located in the center console or glove compartment. iPod 威 control supports Mini, 4G, Photo, Nano, 5G iPod 威 and iPhone 威 devices. Some iPod 威 software versions may not fully support the iPod 威 control features[...]

NOTE: The center console will have a position where the iPodt or consumer electronic audio device cable can be routed through without damaging the cable when clos- ing the lid. A factory cut out space for the cable to be routed may be located in the base of the center console on either the front or side. This allows routing of the cable without dam[...]

Controlling The iPod 姞 Or External USB Device Using Radio Buttons T o get into the iPod 威 /USB/MP3 contr ol mode and access a connected audio device, either press the “AUX” button on the radio faceplate or press the VR button and say ⬙ USB ⬙ or ⬙ Switch to USB ⬙ . Once in the iPod 威 /USB/MP3 control mode, audio tracks (if availabl[...]

during play mode will jump to the next track in the list, or press the VR button and say ⬙ Next or Previous T rack ⬙ . • While a track is playing, press the INFO button to see the associated metadata (artist, track title, album, etc.) for that track. Pressing the INFO button again jumps to the next screen of data for that track. Once all scre[...]

• T urning it clockwise (forward) and counter clockwise (backward) scrolls through the lists, displaying the track detail on the radio display . Once the track to be played is highlighted on the radio display , press the TUNE control knob to select and start playing the track. T urning the TUNE control knob fast will scroll through the list faste[...]

• MUSIC TYPE button: The MUSIC TYPE button is another shortcut button to the genre listing on your audio device. CAUTION! • Leaving the iPod 威 or external USB device (or any supported device) anywhere in the vehicle in ex- treme heat or cold can alter the operation or dam- age the device. Follow the device manufacturer ’ s guidelines. • P[...]

Play Mode When switched to BTSA mode, some audio devices can start playing music over the vehicle’s audio system, but some devices r equire the music to be initiated on the device first, then it will get streamed to the Uconnect 威 phone system. Seven devices can be paired to the Uconnect 威 phone system, but just one can be selected and played[...]

UCONNECT 姞 MUL TIMEDIA — VIDEO ENTERT AINMENT SYSTEM (VES)™ — If Equipped Getting Started • Screen located in the overhead console : Unfold the overhead LCD scr een by pushing the button in the center of the overhead console behind the screen. • W ith the ignition switch in the ON or ACC position, turn the radio on by pushing the ON/OFF[...]

• When the V ideo Scr een ar e open and a DVD is inserted into the VES™ player , the screen turns on automati- cally , the headphone transmitters turn on and play- back begins. Single Video Screen NOTE: T ypically there are two different ways to operate the featur es of the V ideo Entertainment System (VES)™. • The Remote Control • The T [...]

Using The Remote Control 1. Press the MODE button on the Remote Control. 2. While looking at Screen 1, highlight DISC by either pressing Up/Down/Left/Right buttons or by repeat- edly pressing the MODE button, then press ENTER. NOTE: • Channel/Screen 1 select mode information is shown on the left side of the screen. • Channel/Screen 2 select mod[...]

Using The T ouch-Screen Radio Controls 1. Press the MENU hard-key on the radio faceplate. 2. T ouch the Rear VES soft-key to display the Rear VES Controls. If a channel list appears on the right side of the screen, touch the HIDE LIST soft-key to display the Rear VES Controls screen. 3. T ouch the 1 soft-key and then the DISC soft-key in the MEDIA [...]

NOTE: The “1” and “2” soft-keys are displayed for the headphone channels. T ouch 1 or 2 based on which channel you want to change, select the new mode from the available list on the right. Modes that are unavailable are greyed-out. NOTE: • T o view a DVD on the radio pr ess the RADIO/MEDIA hard-key , on the radio faceplate, then touch the[...]

• V iewing a DVD on the T ouch-Scr een radio screen is not available in all states/provinces, and the vehicle must be stopped, and the shift lever must be in the P ARK position for vehicles with automatic transmis- sion. In vehicles with manual transmission the parking brake must be engaged. • T ouching the screen on a T ouch-Screen radio while[...]

When connecting an external sour ce to the AUX input, be sure to follow the standard color coding for the VES™ jacks: NOTE: Certain high-end video games, such as Playsta- tion3 and XBox360 will exceed the power limit of the vehicle’s Power Inverter . Refer to the Power Inverter section in your vehicle’s Owner’s Manual for more information. [...]

2. T ouch the Rear VES soft-key to display the Rear VES Controls. If a channel list is displayed, press the HIDE LIST soft-key to display the Rear VES Controls screen. 3. T ouch the 1 soft-key and then touch AUX 1 in the VES column. T o exit press the back arrow soft-key at the top of the screen. Rear VES Soft-Key Select Channel/Screen 1 And AUX 1 [...]

Listen T o An Audio Source On Channel 2 While A Video Is Playing On Channel 1 Ensure the Remote Control and Headphone switch is on Channel 2. Using The Remote Control 1. Press the MODE button on the Remote Control and the Mode Select Screen will display , unless a video is playing then only a small banner will appear on the bottom of the screen. 2.[...]

2. T ouch the Rear VES soft-key to display the Rear VES Controls. If a channel list is displayed, press the HIDE LIST soft-key to display the Rear VES Controls screen. 3. T o listen to an audio source on Channel 2 while a video is playing on Channel 1, touch the 2 soft-key and choose an audio source. T o exit touch the back arrow soft-key at the to[...]

Important Notes For Single Video Screen System • VES™ is able to transmit two channels of stereo audio simultaneously . • In split scr een mode the left side equates to Channel 1 and right side equates to Channel 2. • If a video source is selected on Channel 1, then Channel 2 is for audio only . Selecting a video source (DVD) will not show [...]

Using The Remote Control 1. Press the MODE button on the Remote Control. 2. While looking at Screen 1, highlight DISC by either pressing Up/Down/Left/Right buttons or by repeat- edly pressing the MODE button, then press ENTER. NOTE: • Channel/Screen 1 select mode information is shown on the left side of the screen. • Channel/Screen 2 select mod[...]

Using The T ouch-Screen Radio Controls 1. Press the MENU hard-key on the radio faceplate. 2. T ouch the Rear VES soft-key to display the Rear VES Controls. If a channel list is displayed, press the HIDE LIST soft-key to display the Rear VES Controls screen. 3. T ouch the 1 or 2 soft-key and then the DISC soft-key in the MEDIA column. T o exit touch[...]

NOTE: • T o view a DVD on the radio pr ess the RADIO/MEDIA hard-key , on the radio faceplate, then touch the DISC tab soft-key and then the VIEW VIDEO soft-key . • V iewing a DVD on the T ouch-Scr een radio screen is not available in all states/provinces, and the vehicle must be stopped, and the shift lever must be in the P ARK position for veh[...]

2. Channel Selector Indicators – When a button is pressed, the currently affected channel or channel button is illuminated momentarily . 3. Light – T urns the remote control backlighting on or of f. The remote backlighting turns off automatically after five seconds. 4. Channel/Screen Selector Switch - Indicates which channel is being controlled[...]

8. 䉴 / 㥋 (Play/Pause) – Begin/resume or pause disc play . 9. ▪ (Stop) – Stops disc play . 10. PROG Up/Down – When listening to a radio mode, pressing PROG Up selects the next pr eset and press- ing PROG Down selects the previous preset stored in the radio. When listening to compressed audio on a data disc, PROG Up selects the next direc[...]

17. 䉳䉳 – In radio modes, press to seek to the previous tunable station. In disc modes, press and hold to fast rewind through the current audio track or video chapter . In satellite video mode, press to advance to the previous channel. In menu modes use to navigate in the menu. 18. ENTER – Press to select the highlighted option in a menu. 19[...]

Locking The Remote Control All remote contr ol functionality can be disabled as a parental control featur e. • T o disable the Remote Control from making any changes, pr ess the V ideo Lock button on the DVD player (if equipped). If the vehicle is not equipped with a DVD player , follow the radio’s instructions to turn V ideo Lock on. The radio[...]

Headphones Operation The headphones receive two separate channels of audio using an infrared transmitter from the video screen. Front seat occupants receive some headphone audio coverage to allow them to adjust the headphone volume for the young rear seat occupants that may not be able to do so for themselves. If no audio is heard after increasing [...]

Controls The headphone power indicator and contr ols are located on the right ear cup. NOTE: The r ear video system must be turned on before sound can be heard from the headphones. T o conserve battery life, the headphones will automatically turn off approximately three minutes after the r ear video system is turned off. Changing the Audio Mode for[...]

Replacing The Headphone Batteries Each set of headphones requir es two AAA batteries for operation. T o replace the batteries: • Locate the battery compartment on the left ear cup of the headphones, and then slide the battery cover downward. • Replace the batteries, making sure to orient them according to the polarity diagram shown. • Replace[...]

may not allow the exclusion or limitation of incidental or consequential damages, so the above limitation may not apply to you. This warranty gives you specific legal rights. Y ou may also have other rights, which vary fr om jurisdiction to jurisdiction. What Will Unwired 威 Do? Unwired 威 , at its option, will repair or replace any defective Pro[...]

mode, but not change stations until the radio mode is changed to a mode that is differ ent from the VES™ selected radio mode. When shared, the radio has priority over the VES™ or all radio modes (FM, AM, and SA T). The VES™ has the ability to switch tuner (AM/FM), SEEK, SCAN, TUNE, and recall presets in radio modes as long as it is not in sha[...]

1. Channel 1 Mode 2. Channel 1 Shared Status 3. Channel 1 Audio Only/Mute 4. Channel 2 Mode 5. Channel 2 Shared Status 6. Channel 2 Audio Only/Mute 7. Channel 1 ENTER Button Action 8. Channel 2 ENTER Button Action 9. Clock 10. V ideo Lock 1 1. Not A vailable / Error 12. Disc Changer Status Numeric Keypad Menu When the display for either Channel 1 o[...]

screen makes it easy to enter a specific tuner frequency , satellite channel, or track number . T o enter the desired digit: 1. Press the remote control’s navigation buttons ( 䉱 , 䉲 , 䉴 , 䉳 ) to navigate to the desired digit. 2. When the digit is highlighted, press the remote con- trol’s ENTER button to select the digit. Repeat these st[...]

screen makes it easy to enter a specific tuner frequency , satellite channel, or track number . T o enter the desired digit: 1. Press the remote control’s navigation buttons ( 䉱 , 䉲 , 䉴 , 䉳 ) to navigate to the desired digit. 2. When the digit is highlighted, press the remote con- trol’s ENTER button to select the digit. Repeat these st[...]

Disc Menu When listening to a CD Audio or CD Data disc, pressing the remote control’s MENU button displays a list of all com- mands which contr ol playback of the disc. Using the options you can activate or cancel Scan play and Random play . Display Settings When watching a video source (DVD V ideo with the disc in Play mode, Aux V ideo, SIRIUS B[...]

T o change the settings, press the remote control’s navi- gation buttons ( 䉱 , 䉲 ) to select an item, then press the remote control’s navigation buttons ( 䉴 , 䉳 ) to change the value for the currently selected item. T o reset all values back to the original settings, select the Default Settings menu option and press the remote control?[...]

Disc Formats The VES™ DVD player is capable of playing the follow- ing types of discs (12 mm or 8 mm diameter): • DVD-V ideo discs (MPEG-2 video compression) (see notes about DVD Region Codes) • DVD-Audio discs (2 channel audio output only) • Audio Compact Discs (CDs) • CD Data discs with MP3 and WMA compr essed audio format files • V i[...]

If you r ecord a disc using a personal computer , ther e may be cases where the VES™ DVD player may not be able to play some or the entire disc, even if it is recor ded in a compatible format and is playable on other players. T o help avoid playback problems, use the following guide- lines when recording discs. • Open sessions are ignored. Only[...]

Compressed Audio Files (MP3 and WMA) The DVD player is capable of playing MP3 (MPEG-1 Audio Layer 3) and WMA (W indows Media Audio) files from a CD Data disc (usually a CD-R or CD-RW). • The DVD player always uses the file extension to determine the audio format, so MP3 files must always end with the extension ⬙ .mp3 ⬙ or ⬙ .MP3 ⬙ and WMA[...]

Disc Errors If the DVD player is unable to r ead the disc, a ⬙ Disc Error ⬙ message is displayed on the VES™ and Radio displays and the disc is automatically ejected. A dirty , damaged, or incompatible disc format are all potential causes for a ⬙ Disc Error ⬙ message. If a disc has a damaged track which results in audible or visible error[...]

All of the Language settings have a special ⬙ Other ⬙ setting to accommodate languages other than Japanese or Eng- lish. These languages are selected using a special four - digit code. T o enter a new language code, activate the DVD Setup Menu and follow these additional instructions: • Using the r emote control Up and Down cursor but- tons, [...]

them where lower numbers are designated for all audi- ences and higher numbers are designated for more adult audiences. When a DVD-V ideo disc is loaded, its rating is compared to the setting in the DVD player . If the rating of the disc is higher than the setting in the player , a Passwor d screen is displayed. In or der to watch the disc, the r e[...]

T o set the password, activate the DVD Setup Menu and follow these additional instructions: • Using the remote control Left and Right cursor but- tons, select the Rating tab. • Highlight ⬙ Change Password ⬙ , and then press the remote control’s ENTER button. • Enter the current password. Select a digit, use the remote control Up and Dow[...]

T o set the rating, activate the DVD Setup Menu and follow these additional instructions: • Using the remote control’s Left and Right cursor buttons, select the Rating tab. • Highlight ⬙ Change Rating ⬙ , and then press the remote control’s ENTER button. • Enter the current password. Select a digit, use the remote control’s Up and D[...]

• Using the remote control’s Up and Down cursor buttons, select the new rating level, and then press the remote control’s ENTER button to accept the change. Product Agreement This product incorporates copyright protection technol- ogy that is protected by U.S. patents and other intellec- tual property rights. Use of this copyright protection [...]

The right-hand control is a rocker -type switch with a pushbutton in the center and controls the volume and mode of the sound system. Pressing the top of the rocker switch will increase the volume, and pressing the bottom of the rocker switch will decrease the volume. Pressing the center button will make the radio switch between the various modes a[...]

CD Player Pressing the top of the switch once will go to the next track on the CD. Pressing the bottom of the switch once will go to the beginning of the current track, or to the beginning of the pr evious track if it is within one second after the current track begins to play . If you press the switch up or down twice, it plays the second track; t[...]

6. Do not expose the disc to direct sunlight. 7. Do not store the disc wher e temperatures may become too high. NOTE: If you experience difficulty in playing a particu- lar disc, it may be damaged (i.e., scratched, reflective coating removed, a hair , moisture or dew on the disc) oversized, or have protection encoding. T ry a known good disc before[...]

Dual-Zone Manual Heating And Air Conditioning The Dual-Zone Manual Climate Controls allow both driver and front passenger seat occupants to select indi- vidual comfort settings. The controls consist of a series of outer rotary dials and inner push knobs. Blower Control Rotate this contr ol to regulate the amount of air forced through the ven- tilat[...]

• Passenger T emperature Control Rotate this control to regulate the tem- perature of the air inside the passenger compartment for the right front seat occupant. Rotating the dial left into the blue area of the scale indicates cooler temperatures, while rotating right into the red area indicates warmer tem- peratures. NOTE: If your air conditioni[...]

NOTE: For all settings, except full cold or full hot, there is a dif ference in temperature between the upper and lower outlets. The warmer air flows to the floor outlets. This feature gives improved comfort during sunny but cool conditions. Floor Air is dir ected through the floor outlets with a small amount flowing through the defr ost and side w[...]

Recirculation Control Pressing the Recirculation Control button will put the system in recirculation mode. This can be used when outside conditions such as smoke, odors, dust, or high humidity are pres- ent. Activating recirculation will cause the LED in the control button to illuminate. NOTE: • Continuous use of the Recirculation mode may make t[...]

Air Conditioning Control Press this button to engage the Air Con- ditioning. A light will illuminate when the Air Conditioning system is engaged. Rotating the dial left into the blue area of the scale indicates cooler temperatures, while rotating right into the red area indicates warmer temperatures. NOTE: The air conditioning compressor will not e[...]

• When occupants in the vehicle select an Auto mode operation, Auto blower operation is set by using a push button on the control unit and a comfort tem- perature setting by using the temperature up and down buttons. • The system provides set-and-forget operation for op- timum comfort and convenience. • The system can also be controlled manua[...]

2. Recirculation Control Button Press and release to change the current setting, the indicator illuminates when ON. 3. Left Front Seat Occupant T emperature Display This display shows the temperature setting for the left front seat occupant. 4. Mode Display This display shows the current Mode selection (Panel, Bi-Level, Floor , Mix). 5. Blower Cont[...]

10. Auto T emperatur e Control Button Controls airflow temperature, distribution, volume, and the amount of air recirculation automatically . Press and release to select. Refer to “Automatic Operation” for more information. Performing this function will cause the A TC to switch between manual mode and automatic modes. 1 1. Blower Control There [...]

Automatic Operation 1. Press the AUTO button on the Automatic T emperatur e Control (A TC) Panel. 2. Next, adjust the temperature you would like the system to maintain by adjusting the driver and front passenger temperature control buttons. Once the de- sired temperature is displayed, the system will achieve and automatically maintain that comfort [...]

Blower Control There are seven fixed blower speeds. Use the outer dial control to regulate the amount of air forced through the system in any mode you select. The blower speed increases as you move the control clockwise and decreases when you move the control counter- clockwise. The blower fan speed can be set to any fixed speed by adjusting the bl[...]

Floor Mode Air comes from the floor outlets. A slight amount of air is directed through the defrost and side window demister outlets. Mix Mode Air comes fr om the floor , defr ost and side window demist outlets. This mode works best in cold or snowy conditions. It allows you to stay comfortable while keeping the windshield clear . Defrost Mode Air [...]

NOTE: • If the system is in Mix, Floor or Defrost Mode, the A/C can be turned off, but the A/C system shall remain active to prevent fogging of the windows. • If fog or mist appears on the windshield or side glass, select Defrost mode and increase blower speed. Recirculation Control When outside air contains smoke, odors, or high humidity , or [...]

As the temperature gets colder , it may be necessary to direct air onto the windshield. Adjust the temperature control and blower speed to maintain comfort. Higher blower speeds will reduce fogging. Interior fogging on the windshield can be quickly removed by selecting the Defrost mode. Regular cleaning of the inside of the windows with a non-filmi[...]

Operating T ips Chart 4 UNDERST ANDING YOUR INSTRUMENT P ANEL 445 I n f o r m a t i o n P r o v i d e d b y :[...]

I n f o r m a t i o n P r o v i d e d b y :[...]

ST ARTING AND OPERA TING CONTENTS 䡵 ST ARTING PROCEDURES ............... .453 ▫ Automatic T ransmission ............... .453 ▫ Keyless Enter-N-Go™ ................. .454 ▫ Normal Starting ...................... .455 ▫ Extreme Cold W eather (Below –20°F Or −29°C) ............... .457 ▫ If Engine Fails T o Start ................ .[...]

▫ Quadra-T rac II 威 Operating Instructions/ Precautions – If Equipped .............. .482 ▫ Shift Positions ....................... .483 ▫ Shifting Procedures ................... .484 ▫ Quadra-Drive 威 II System – If Equipped ..... .487 䡵 SELEC-TERRAIN™ — IF EQUIPPED ....... .488 ▫ Description ......................... .488 ?[...]

▫ Power Steering Fluid Check ............. .504 䡵 FUEL SA VER TECHNOLOGY (IF EQUIPPED) — 5.7L ENGINE ONL Y .................... .505 䡵 P ARKING BRAKE ..................... .505 䡵 ELECTRONIC BRAKE CONTROL SYSTEM . . . .507 ▫ Anti-Lock Brake System (ABS) ........... .508 ▫ T raction Control System (TCS) ........... .508 ▫ Brake Assist[...]

▫ T ire Pressur es For High Speed Operation . . . .535 ▫ Radial Ply T ires ..................... .535 ▫ All Season T ires – If Equipped ........... .535 ▫ Summer Or Three Season T ires – If Equipped . .536 ▫ Snow T ires ......................... .536 ▫ Spare T ire Matching Original Equipped T ire And Wheel – If Equipped ..........[...]

▫ MMT In Gasoline .................... .557 ▫ Materials Added T o Fuel ............... .558 ▫ Fuel System Cautions .................. .558 ▫ Carbon Monoxide W arnings ............ .559 䡵 FLEXIBLE FUEL (3.6L ENGINE ONL Y) — IF EQUIPPED .......................... .560 ▫ E-85 General Information .............. .560 ▫ Ethanol Fuel (E-85[...]

▫ T owing T ips ........................ .584 䡵 SNOW PLOW ........................ .585 䡵 RECREA TIONAL T OWING (BEHIND MOTORHOME, ETC.) .................. .586 ▫ T owing This V ehicle Behind Another V ehicle . .586 ▫ Recreational T owing – T wo-Wheel Drive Models ............................ .587 ▫ Recreational T owing – Quadra-T r[...]

ST ARTING PROCEDURES Before starting your vehicle, adjust your seat, adjust the inside and outside mirrors, fasten your seat belt, and if present, instruct all other occupants to buckle their seat belts. W ARNING! • When leaving the vehicle, always remove the key fob from the ignition and lock your vehicle. • Never leave children alone in a veh[...]

CAUTION! Damage to the transmission may occur if the follow- ing precautions are not observed: • Do not shift from REVERSE, P ARK, or NEUTRAL into any forward gear when the engine is above idle speed. • Shift into P ARK only after the vehicle has come to a complete stop. • Shift into or out of REVERSE only after the vehicle has come to a comp[...]

Installing And Removing The ENGINE ST AR T/STOP Button Installing The Button 1. Remove the key fob from the ignition switch. 2. Insert the ENGINE ST AR T/STOP button into the ignition switch with the lettering facing up and readable. 3. Press firmly on the center of the button to secure it into position. Removing The Button 1. The ENGINE ST AR T/ST[...]

T o T urn Off The Engine Using ENGINE ST AR T/STOP Button 1. Place the shift lever in P ARK, then press and release the ENGINE ST ART/ST OP button. 2. The ignition switch will return to the OFF position. 3. If the shift lever is not in P ARK, the ENGINE ST AR T/ STOP button must be held for two seconds and vehicle speed must be below 5 mph (8 km/h)[...]

• Press the ENGINE ST AR T/STOP button a second time to change the ignition switch to the RUN position (EVIC displays “IGNITION MODE RUN”), • Press the ENGINE ST AR T/STOP button a third time to return the ignition switch to the OFF position (EVIC displays “IGNITION MODE OFF”). Extreme Cold Weather (Below –20°F Or −29°C) T o ensur[...]

W ARNING! (Continued) • If the vehicle has a discharged battery , booster cables may be used to obtain a start from a booster battery or the battery in another vehicle. This type of start can be dangerous if done improperly . Refer to “Jump Starting” in “What T o Do In Emergen- cies” for further information. Clearing A Flooded Engine (Usi[...]

The starter motor will disengage automatically in 10 sec- onds. Once this occurs, r elease the accelerator pedal, turn the ignition switch to the LOCK position, wait 10 to 15 seconds, then repeat the “Normal Starting” pr ocedure. CAUTION! T o prevent damage to the starter , wait 10 to 15 sec- onds before trying again. After Starting The idle sp[...]

AUTOMA TIC TRANSMISSION CAUTION! Damage to the transmission may occur if the follow- ing precautions are not observed: • Shift into P ARK only after the vehicle has come to a complete stop. • Shift into or out of REVERSE only after the vehicle has come to a complete stop and the engine is at idle speed. • Do not shift between P ARK, REVERSE, [...]

W ARNING! (Continued) • It is dangerous to shift out of P ARK or NEUTRAL if the engine speed is higher than idle speed. If your foot is not firmly pressing the brake pedal, the vehicle could accelerate quickly forward or in re- verse. Y ou could lose control of the vehicle and hit someone or something. Only shift into gear when the engine is idli[...]

turned to the ON/RUN position (engine r unning or not; engine running, for vehicles with 8-speed transmission) and the brake pedal must be pressed. In 8-speed vehicles, the brake pedal must also be pressed to shift from NEUTRAL into DRIVE or REVERSE when the vehicle is stopped or moving at low speeds. Five-Speed Automatic T ransmission (3.6L Engine[...]

Gear Ranges DO NOT race the engine when shifting from P ARK or NEUTRAL into another gear range. If there is a need to restart the engine, be sure to cycle the ignition to the LOCK/OFF position before restarting. T ransmission gear engagement may be delayed after restarting the engine if the key is not cycled to the LOCK/OFF position first. NOTE: Af[...]

move the shift lever out of P ARK. As an added precau- tion, turn the front wheels towar d the curb on a downhill grade and away from the curb on an uphill grade. W ARNING! • Never use the P ARK position as a substitute for the parking brake. Always apply the parking brake fully when parked to guard against vehicle move- ment and possible injury [...]

W ARNING! (Continued) • Unintended movement of a vehicle could injure those in or near the vehicle. As with all vehicles, you should never exit a vehicle while the engine is running. Before exiting a vehicle, always apply the parking brake, shift the transmission into P ARK turn the engine OFF , and remove the key fob. When the ignition is in the[...]

CAUTION! • Before moving the shift lever out of P ARK, you must turn the ignition switch from the OFF posi- tion to the ON/RUN position, and also press the brake pedal. Otherwise, damage to the shift lever could result. • DO NOT race the engine when shifting from P ARK or NEUTRAL into another gear range, as this can damage the drivetrain. The f[...]

W ARNING! (Continued) practices that limit your response to changing traffic or road conditions. Y ou might lose control of the vehicle and have a collision. CAUTION! T owing the vehicle, coasting, or driving for any other reason with the transmission in NEUTRAL can cause severe transmission damage. Refer to “Recreational T owing” in “Startin[...]

in dir ect gear regar dless of which forwar d gear is se- lected. P ARK, REVERSE, and NEUTRAL will continue to operate. The Malfunction Indicator Light (MIL) may be illuminated. Limp Home Mode allows the vehicle to be driven to an authorized dealer for service without dam- aging the transmission. In the event of a momentary problem, the transmissio[...]

Y ou can switch between DRIVE and ERS mode at any vehicle speed. When the shift lever is in the DRIVE position, the transmission will operate automatically , shifting between all available gears. T apping the shift lever to the left (-) will downshift the transmission, activate ERS mode, display the current gear in the instrument cluster , and main[...]

Overdrive Operation The automatic transmission includes an electr onically controlled Overdrive (fifth gear). The transmission will automatically shift into Overdrive if the following con- ditions are present: • the shift lever is in the DRIVE position, • vehicle speed is sufficiently high, and • the driver is not heavily pressing the acceler[...]

Gear Ranges DO NOT race the engine when shifting from P ARK or NEUTRAL into another gear range. NOTE: After selecting any gear range, wait a moment to allow the selected gear to engage before accelerating. This is especially important when the engine is cold. P ARK This range supplements the parking brake by locking the transmission. The engine can[...]

W ARNING! • Never use the P ARK position as a substitute for the parking brake. Always apply the parking brake fully when parked to guard against vehicle move- ment and possible injury or damage. • Y our vehicle could move and injure you and others if it is not completely in P ARK. Check by trying to move the shift lever rearward (with the brak[...]

W ARNING! (Continued) • Unintended movement of a vehicle could injure those in or near the vehicle. As with all vehicles, you should never exit a vehicle while the engine is running. Before exiting a vehicle, always apply the parking brake, shift the transmission into P ARK turn the engine OFF , and remove the key fob. When the ignition is in the[...]

CAUTION! • Before moving the shift lever out of P ARK, you must turn the ignition switch from the OFF posi- tion to the ON/RUN position, and also press the brake pedal. Otherwise, damage to the shift lever could result. • DO NOT race the engine when shifting from P ARK or NEUTRAL into another gear range, as this can damage the drivetrain. The f[...]

W ARNING! Do not coast in NEUTRAL and never turn off the ignition to coast down a hill. These are unsafe practices that limit your response to changing traffic or road conditions. Y ou might lose control of the vehicle and have a collision. CAUTION! T owing the vehicle, coasting, or driving for any other reason with the transmission in NEUTRAL can [...]

range will impr ove performance and extend transmission life by reducing excessive shifting and heat buildup. If the transmission temperature exceeds normal operat- ing limits, the powertrain controller will modify the transmission shift schedule and expand the range of torque converter clutch engagement. This is done to prevent transmission damage[...]

T ransmission Limp Home Mode T ransmission function is monitored electronically for abnormal conditions. If a condition is detected that could result in transmission damage, T ransmission Limp Home Mode is activated. In this mode, the transmission r emains in dir ect gear regar dless of which forwar d gear is se- lected. P ARK, REVERSE, and NEUTRAL[...]

Electronic Range Select (ERS) Operation The Electronic Range Select (ERS) shift control allows the driver to limit the highest available gear when the shift lever is in the DRIVE position. For example, if you shift the transmission into 3 (third gear), the transmission will never shift above third gear , but will shift down into second and first ge[...]

W ARNING! Do not downshift for additional engine braking on a slippery surface. The drive wheels could lose their grip and the vehicle could skid, causing an accident or personal injury . NOTE: T o select the proper gear position for maximum deceleration (engine braking), simply press and hold the shift lever to the left (-). The transmission will [...]

When T o Use TOW/HAUL Mode When driving in hilly areas, towing a trailer , carrying a heavy load, etc., and frequent transmission shifting oc- curs, pr ess the T OW/HAUL switch to activate TOW/ HAUL mode. This will improve performance and reduce the potential for transmission overheating or failur e due to excessive shifting. When operating in T OW[...]

T orque Converter Clutch A feature designed to improve fuel economy has been included in the automatic transmission on your vehicle. A clutch within the torque converter engages automati- cally at calibrated speeds. This may result in a slightly differ ent feeling or response during normal operation in the upper gears. When the vehicle speed drops [...]

FOUR-WHEEL DRIVE OPERA TION Quadra-T rac I 姞 Operating Instructions/ Precautions – If Equipped The Quadra-T rac I 威 is a single-speed (HI range only) transfer case, which provides convenient full-time four- wheel drive. No driver interaction is requir ed. The Brake T raction Control (BTC) System, which combines standard ABS and T raction Cont[...]

When operating your vehicle in 4WD LOW , the engine speed is approximately three times that of the 4WD HI position at a given road speed. T ake car e not to overspeed the engine and do not exceed 25 mph (40 km/h). Proper operation of four-wheel drive vehicles depends on tires of equal size, type, and circumference on each wheel. Any differ ence wil[...]

NEUTRAL This range disengages both the front and r ear driveshafts from the powertrain. It is to be used for flat towing behind another vehicle. Refer to “Recreational T owing” in “Starting and Operating” for further information. 4WD LOW This range is for low speed four -wheel drive. It locks the front and rear driveshafts together and forc[...]

NOTE: If shift conditions/interlocks are not met, or a transfer case motor temperature pr otection condition exists, a “For 4x4 Low Slow Below 3 MPH or 5 KPH Put T rans in N Press 4 Low” message will flash fr om the Electronic V ehicle Information Center (EVIC). Refer to “Electronic V ehicle Information Center (EVIC)” in “Understanding Y [...]

NOTE: • If shift conditions/interlocks are not met, or a transfer case motor temperature protection condition exists, a “For 4x4 High Slow Below 3 MPH or 5 KPH Put T rans in N Press 4 Low” message will flash from the Elec- tronic V ehicle Information Center (EVIC). Refer to “Electronic V ehicle Information Center (EVIC)” in “Understandi[...]

5. Repeat Steps 1 to 4 to shift out of NEUTRAL. NOTE: If shift conditions/interlocks are not met, a “T o T ow V ehicle Safely , Read Neutral Shift Procedure in Owners Manual” message will flash from the Electronic V ehicle Information Center (EVIC). Refer to “Electronic V ehicle Information Center (EVIC)” in “Understanding Y our Instrumen[...]

W ith a traction difference between left and right wheels, the coupling will sense a speed difference. As one wheel begins to spin faster than the other , torque will automatically transfer from the wheel that has less traction, to the wheel that has traction. While the transfer case and axle coupling differ in design, their operation is similar . [...]

to allow more driver control of vehicle while maintain- ing safe handling controls. The vehicle will lower (if equipped with Air Suspension) to Aero Mode in High Range. 4WD Low is not available in SPORT mode, if 4WD Low is selected the Selec-T errain™ will auto- matically switch back to AUTO. • Snow – T uning set for additional stability in i[...]

equipped with air suspension, the vehicle level will change to Off-Road 2. If the Selec-T errain™ switch is in ROCK mode, and the transfer case is switched from 4WD Low to 4WD High, the Selec-T errain™ system will return to AUT O. Electronic V ehicle Information Center (EVIC) Display Messages When the appropriate conditions exist, a message wil[...]

• Normal Ride Height (NRH) – This is the standar d position of the suspension and is meant for normal driving. • Off-Road 1 (OR1) (Raises the vehicle approximately 1.3 in (33 mm) – This is the primary position for all off-r oad driving until OR2 is needed. A smoother and more comfortable ride will result. Press the “Up” button once from[...]

Selec-T errain™ knob is turned to the “SPORT” posi- tion. T urning the Selec-T errain™ knob to the “AUT O” position will return the system to normal operation. • Park Mode (Lowers the vehicle approximately 1.5 in (38 mm) – This position lowers the vehicle for easier passenger entry and exit as well as lowering the r ear of the vehic[...]

After the engine is turned off, it may be noticed that the air suspension system operates briefly , this is normal. The system is corr ecting the position of the vehicle to ensur e a proper appearance. T o assist with changing a spar e tire, the Quadra-Lift™ air suspension system has a feature which allows the auto- matic leveling to be disabled.[...]

lamps will show a position which the system is working to achieve. When raising, if multiple indicator lamps are flashing on the “Up” button, the highest flashing indica- tor lamp is the position the system is working to achieve. When lowering, if multiple indicators are flashing on the ⬙ Up ⬙ button the lowest solid indicator lamp is the p[...]

• Park Mode – Indicator lamp 3 will be illuminated when the vehicle is in Park Mode. If Park Mode is requested while vehicle speed is between 15 mph (24 km/h) and 25 mph (40 km/h), indicator lamp 4 will remain on solid and indicator lamp 3 will flash as the system waits for the vehicle to r educe speed. If vehicle speed is reduced to, and kept [...]

OFF-ROAD DRIVING TIPS NOTE: Prior to off-road driving, r emove the fr ont air dam to prevent damage. The front air dam is attached to the lower front fascia with seven quarter turn fasteners and can be removed by hand. Quadra-Lift™ – If Equipped When of f-roading, it is recommended that the lowest useable vehicle height that will clear the curr[...]

or terrain be selected. The vehicle height should then be raised as required by the changes in terrain. The Selec-T errain™ switch will automatically change the vehicle to the optimized height based on the Selec- T errain™ switch position. The vehicle height can be changed from the default height for each Selec-T errain™ mode by normal use of[...]

NOTE: Y our vehicle is capable of water for ding in up to 20 inches (51 cm) of water , while crossing small rivers or streams. T o maintain optimal performance of your vehi- cle’s heating and ventilation system it is r ecommended to switch the system into recirculation mode during water fording. CAUTION! When driving through water , do not exceed[...]

Maintenance After driving through deep water , inspect your vehicle fluids and lubricants (engine oil, transmission oil, axle, transfer case) to assure the fluids have not been contami- nated. Contaminated fluid (milky , foamy in appearance) should be flushed/changed as soon as possible to pre- vent component damage. Driving In Snow, Mud And Sand I[...]

W ARNING! If the engine stalls, you lose forward motion, or cannot make it to the top of a steep hill or grade, never attempt to turn around. T o do so may result in tipping and rolling the vehicle. Always back care- fully straight down a hill in REVERSE gear . Never back down a hill in NEUTRAL using only the brake. Remember , never drive diagonall[...]

• Completely inspect the underbody of your vehicle. Check tires, body structure, steering, suspension, and exhaust system for damage. • Inspect the radiator for mud and debris and clean as requir ed. • Check threaded fasteners for looseness, particularly on the chassis, drivetrain components, steering, and sus- pension. Retighten them, if req[...]

and increased ease of maneuverability in tight spaces. The system will vary its assist to provide light efforts while parking and good feel while driving. If the electro- hydraulic power steering system experiences a fault that prevents it fr om providing power steering assist, then the system will provide mechanical steering capability . CAUTION! [...]

NOTE: • Even if power steering assistance is no longer opera- tional, it is still possible to steer the vehicle. Under these conditions there will be a substantial increase in steering effort, especially at very low vehicle speeds and during parking maneuvers. • If the condition persists, see your authorized dealer for service. 5.7L Engine The [...]

W ARNING! Continued operation with reduced power steering assist could pose a safety risk to yourself and others. Service should be obtained as soon as possible. CAUTION! Prolonged operation of the steering system at the end of the steering wheel travel will increase the steering fluid temperature and it should be avoided when possible. Damage to t[...]

If necessary , add fluid to restor e to the proper indicated level. W ith a clean cloth, wipe any spilled fluid from all surfaces. Refer to “Fluids, Lubricants, and Genuine Parts” in “Maintaining Y our V ehicle” for further information. FUEL SA VER TECHNOLOGY (IF EQUIPPED) — 5.7L ENGINE ONL Y This feature offers improved fuel economy by s[...]

When the parking brake is applied with the ignition switch in the ON position, the “Brake W arning Light” in the instrument cluster will illuminate. NOTE: • When the parking brake is applied and the transmis- sion is placed in gear , the “Brake W arning Light” will flash. If vehicle speed is detected, a chime will sound to alert the drive[...]

W ARNING! (Continued) • Do not leave the key fob in or near the vehicle (or in a location accessible to children), and do not leave Keyless Enter-N-Go™ in the ACC or ON/ RUN mode. A child could operate power windows, other controls, or move the vehicle. • Be sure the parking brake is fully disengaged before driving; failure to do so can lead [...]

(BLD), Ready Alert Braking, Rain Brake Support and, if it has four-wheel drive with the MP 3023 two-speed trans- fer case, Hill Descent Control (HDC). Anti-Lock Brake System (ABS) This system aids the driver in maintaining vehicle control under adverse braking conditions. The system contr ols hydraulic brake pressure to prevent wheel lock-up and he[...]

on a driven axle is spinning faster than the other , the system will apply the brake of the spinning wheel. This will allow more engine torque to be applied to the wheel that is not spinning. This feature remains active even if ESC system is in the “Partial Off” mode. Refer to “Elec- tronic Stability Control (ESC)” in this section for furth[...]

speed of the vehicle. When ERM determines that the rate of change of the steering wheel angle and vehicle’s speed are sufficient to potentially cause wheel lift, it then applies the appropriate brake and may also reduce engine power to lessen the chance that wheel lift will occur . ERM will only intervene during very sever e or evasive driving ma[...]

path of the vehicle. When the actual path does not match the intended path, ESC applies the brake of the appro- priate wheel to assist in counteracting the oversteer or understeer condition. • Oversteer - when the vehicle is turning more than appropriate for the steering wheel position. • Understeer - when the vehicle is turning less than appro[...]

High Range (Four-Wheel Drive Models) Or T wo-Wheel Drive Models On This is the normal operating mode for ESC in 4WD HIGH range and in two-wheel drive vehicles. Whenever the vehicle is started or the transfer case (if equipped) is shifted fr om 4WD LOW range or NEUTRAL back to 4WD HIGH range, the ESC system will be in this “On” mode. This mode s[...]

NOTE: T o improve the vehicle’s traction when driving with snow chains, or starting off in deep snow , sand, or gravel, it may be desirable to switch to the “Partial Off” mode by pressing the “ESC OFF” switch. Once the situation r equiring ESC to be switched to the “Partial Off” mode is overcome, turn ESC back on by momen- tarily pr e[...]

W ARNING! If TSC activates while driving, slow the vehicle down, stop at the nearest safe location, and adjust the trailer load to eliminate trailer sway . Hill Start Assist (HSA) The HSA system is designed to assist the driver when starting a vehicle from a stop on a hill. HSA will maintain the level of brake pressur e the driver applied for a sho[...]

W ARNING! There may be situations on minor hills (i.e., less than 8%), with a loaded vehicle, or while pulling a trailer , when the system will not activate and slight rolling may occur . This could cause a collision with another vehicle or object. Always remember the driver is responsible for braking the vehicle. T owing With HSA HSA will provide [...]

W ARNING! (Continued) • HSA is not a parking brake. If you stop the vehicle on a hill without putting the transmission in P ARK and using the parking brake, it will roll down the hill and could cause a collision with another ve- hicle or object. Always remember to use the park- ing brake while parking on a hill, and that the driver is responsible[...]

Hill Descent Control (HDC) — Four-Wheel Drive Models With MP3023 T wo-Speed T ransfer Case Only HDC maintains vehicle speed while descending hills during off-road driving situations and is available in 4WD LOW range only . T o enable HDC, press the HDC switch or put the Selec-T errain™ system in “ROCK” mode (“ROCK” mode is only availabl[...]

The HDC speed may be adjusted by the driver to suit the driving conditions. The speed corresponds to the trans- mission gear selected. HDC operation can be overridden with brake application to slow the vehicle down below the HDC control speed. Conversely , if mor e speed is desired during HDC contr ol, the accelerator pedal will increase vehicle sp[...]

W ARNING! HDC is only intended to assist the driver in control- ling vehicle speed when descending hills. The driver must remain attentive to the driving conditions and is responsible for maintaining a safe vehicle speed. ESC Activation/Malfunction Indicator Light And ESC OFF Indicator Light The “ESC Activation/Malfunction Indicator Light” in t[...]

NOTE: • The “ESC Activation/Malfunction Indicator Light” and the “ESC OFF Indicator Light” come on momen- tarily each time the ignition switch is turned ON. • Each time the ignition is turned ON, the ESC system will be ON even if it was turned off pr eviously . • The ESC system will make buzzing or clicking sounds when it is active. T[...]

NOTE: • P (Passenger) - Metric tire sizing is based on U.S. design standards. P-Metric tires have the letter “P” molded into the sidewall preceding the size designa- tion. Example: P215/65R15 95H. • European-Metric tire sizing is based on European design standards. T ires designed to this standard have the tire size molded into the sidewall[...]

T ire Sizing Chart EXAMPLE: Size Designation: P = Passenger car tire size based on U.S. design standards ⴖ ....blank.... ⴖ = Passenger car tire based on European design standards LT = Light truck tire based on U.S. design standards To rS = T emporary spar e tire 31 = Overall diameter in inches (in) 215 = Section width in millimeters (mm) 65 = A[...]

EXAMPLE: Service Description: 95 = Load Index — A numerical code associated with the maximum load a tire can carry H = Speed Symbol — A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions — The maximum speed corresponding to the speed symbol should only be a[...]

EXAMPLE: Load Identification: ⴖ ....blank.... ⴖ = Absence of any text on the sidewall of the tire indicates a Standard Load (SL) tire Extra Load (XL) = Extra load (or reinforced) tir e Light Load (LL) = Light load tire C, D, E, F , G = Load range associated with the maximum load a tire can carry at a specified pressur e Maximum Load — Maximum[...]

EXAMPLE: DOT MA L9 ABCD 0301 DOT = Department of T ransportation — This symbol certifies that the tire is in compliance with the U.S. Department of T ransportation tire safety standards and is approved for highway use MA = Code repr esenting the tire manufacturing location (two digits) L9 = Code repr esenting the tire size (two digits) ABCD = Cod[...]

Tire T erminology And Definitions T erm Definition B-Pillar The vehicle B-Pillar is the structural member of the body located behind the front door . Cold T ire Inflation Pressure Cold tire inflation pressure is defined as the tire pressur e after the vehicle has not been driven for at least 3 hours, or driven less than 1 mile (1.6 km) after sittin[...]

Tire Loading And Tire Pressure T ire And Loading Information Placard Location NOTE: The pr oper cold tire inflation pr essure is listed on the driver ’s side B-Pillar or the rear edge of the driver’s side door . T ire Placard Location 5 ST ARTING AND OPERA TING 527 I n f o r m a t i o n P r o v i d e d b y :[...]

T ire And Loading Information Placard This placard tells you important information about the: 1) number of people that can be carried in the vehicle 2) total weight your vehicle can carry 3) tire size designed for your vehicle 4) cold tire inflation pressur es for the front, rear , and spare tires. Loading The vehicle maximum load on the tire must [...]

NOTE: Under a maximum loaded vehicle condition, gross axle weight ratings (GA WRs) for the fr ont and rear axles must not be exceeded. For further information on GA WRs, vehicle loading, and trailer towing, refer to “V ehicle Loading” in this section. T o determine the maximum loading conditions of your vehicle, locate the statement “The comb[...]

5. Determine the combined weight of luggage and cargo being loaded on the vehicle. That weight may not safely exceed the available cargo and luggage load capacity calculated in Step 4. 6. If your vehicle will be towing a trailer , load from your trailer will be transferred to your vehicle. Consult this manual to determine how this r educes the avai[...]

5 ST ARTING AND OPERA TING 531 I n f o r m a t i o n P r o v i d e d b y :[...]

W ARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle. Never overload them. TIRES — GENERAL INFORMA TION Tire Pressure Proper tire inflation pressur e is essential to the safe and satisfactory o[...]

W ARNING! (Continued) • Unequal tire pressures from one side of the vehicle to the other can cause the vehicle to drift to the right or left. • Always drive with each tire inflated to the recom- mended cold tire inflation pressure. Economy Improper inflation pressur es can cause uneven wear pat- terns to develop across the tir e tread. These ab[...]

CAUTION! After inspecting or adjusting the tire pressure, al- ways reinstall the valve stem cap. This will prevent moisture and dirt from entering the valve stem, which could damage the valve stem. Inflation pressures specified on the placard are always “cold tire inflation pressur e.” Cold tire inflation pressure is defined as the tire pressur[...]

Tire Pressures For High Speed Operation The manufactur er advocates driving at safe speeds within posted speed limits. Where speed limits or condi- tions are such that the vehicle can be driven at high speeds, maintaining correct tire inflation pressur e is very important. Increased tire pressur e and reduced vehicle loading may be requir ed for hi[...]

the tire sidewall. Use all season tir es only in sets of four; failure to do so may adversely affect the safety and handling of your vehicle. Summer Or Three Season Tires – If Equipped Summer tires provide traction in both wet and dry conditions, and are not intended to be driven in snow or on ice. Summer tires will not contain the all season des[...]

Spare Tire Matching Original Equipped Tire And Wheel – If Equipped Y our vehicle may be equipped with a spar e tire and wheel equivalent in look and function to the original equipment tire and wheel found on the front or rear axle of your vehicle. This spare tire may be used in the tire rotation for your vehicle. If your vehicle has this option r[...]

Since this tire has limited tread life the original equip- ment tire should be repaired (or replaced) and r einstalled on your vehicle at the first opportunity . Do not install a wheel cover or attempt to mount a conventional tire on the compact spare wheel, since the wheel is designed specifically for the compact spare tir e. Do not install mor e [...]

your original equipment tire, replace (or repair) the original equipment tire and reinstall on the vehicle at the first opportunity . W ARNING! Limited-use spares are for emergency use only . In- stallation of this limited-use spare tire af fects vehicle handling. W ith this tire, do not drive more than the speed listed on the limit-use spare wheel[...]

T read Wear Indicators T r ead wear indicators ar e in the original equipment tir es to help you in determining when your tires should be replaced. These indicators ar e molded into the bottom of the tr ead grooves. They will appear as bands when the tr ead depth becomes 1/16 in (2 mm). When the tread is worn to the tread wear indicators, the tire [...]

W ARNING! T ires and the spare tire should be replaced after six years, regardless of the remaining tread. Failure to follow this warning can result in sudden tire failure. Y ou could lose control and have a collision resulting in serious injury or death. Keep dismounted tires in a cool, dry place with as little exposure to light as possible. Prote[...]

W ARNING! • Do not use a tire, wheel size or rating other than that specified for your vehicle. Some combinations of unapproved tires and wheels may change sus- pension dimensions and performance characteris- tics, resulting in changes to steering, handling, and braking of your vehicle. This can cause unpredict- able handling and stress to steeri[...]

• Install on Rear T ires Only • Due to limited clearance, the Security Chain Company (SCC) Super Z6 low profile traction device or equiva- lent is r ecommended on P265/60R18 or 265/50R20 tires. W ARNING! Using tires of different size and type (M+S, Snow) between front and rear axles can cause unpredictable handling. Y ou could lose control and [...]

CAUTION! (Continued) • Observe the traction device manufacturer ’ s instruc- tions on the method of installation, operating speed, and conditions for use. Always use the suggested operating speed of the device manufac- turer ’ s if it is less than 30 mph (48 km/h). • Do not use traction devices on a compact spare tire. TIRE ROT A TION RECOM[...]

TIRE PRESSURE MONITOR SYSTEM (TPMS) The T ire Pressure Monitoring System (TPMS) will warn the driver of a low tire pressur e based on the vehicle recommended cold tire placard pr essure. The tire pressur e will vary with temperatur e by about 1 psi (7 kPa) for every 12°F (6.5°C). This means that when the outside temperature decreases, the tire pr[...]

The TPMS will continue to warn the driver of low tire pressur e as long as the condition exists, and will not turn off until the tire pressur e is at or above recommended cold tire placard pr essure. Once the low tir e pressure warning has been illuminated, the tire pressur e must be increased to the recommended cold tir e pressure in order for the[...]

CAUTION! • The TPMS has been optimized for the original equipment tires and wheels. TPMS pressures have been established for the tire size equipped on your vehicle. Undesirable system operation or sensor damage may result when using replacement equip- ment that is not of the same size, type, and/or style. Aftermarket wheels can cause sensor damag[...]

• Seasonal temperature changes will affect tire pressur e, and the TPMS will monitor the actual tire pr essure in the tire. Base System The T ire Pressure Monitor System (TPMS) uses wireless technology with wheel rim-mounted electr onic sensors to monitor tire pr essure levels. Sensors, mounted to each wheel as part of the valve stem, transmit ti[...]

The T ire Pressur e Monitoring T elltale Light will flash on and off for 75 seconds, and r emain on solid when a system fault is detected. In addition, a “SER VICE TPM SYSTEM” message may be displayed for approximately 5 seconds when a system fault is detected, and a chime will sound. If the ignition switch is cycled, this sequence will repeat,[...]

switch cycle, a chime will sound, a “SER VICE TPM SYS- TEM” message will be displayed for a minimum of five sec- onds, and the T ire Pressure Monitoring T elltale Light will flash on and off for 75 seconds and then remain on solid. Once you repair or replace the original road tire, and reinstall it on the vehicle in place of the spare tire, the[...]

T ire Pressure Monitoring Low Pressure W arnings The T ire Pr essure Monitoring T elltale Light will illuminate in the instrument cluster , and an au- dible chime will be activated, when one or more of the four active road tire pressur es ar e low . In addition, the EVIC will display a “LOW TIRE PRESSURE” message for a minimum of five seconds, [...]

pressur e value(s) will stop “flashing,” and the T ire Pres- sure Monitoring T elltale Light will extinguish once the updated tire pressure(s) have been received. The vehicle may need to be driven for up to 20 minutes above 15 mph (24 km/h) to receive this information. SER VICE TPM SYSTEM W arning The T ire Pressur e Monitoring T elltale Light [...]

message will not be present, and a pressure value will be displayed instead of dashes. A system fault can occur by any of the following: 1. Jamming due to electronic devices or driving next to facilities emitting the same Radio Frequencies as the TPM sensors. 2. Installing some form of aftermarket window tinting that affects radio wave signals. 3. [...]

T ire Pr essure Monitoring T elltale Light will flash on and off for 75 seconds and then r emain on solid, and the EVIC will display a ⬙ SER VICE TPM SYSTEM ⬙ message for five seconds and then display dashes (- -) in place of the pr essure value. Once you repair or replace the original road tire, and reinstall it on the vehicle in place of the [...]

FUEL REQUIREMENTS 3.6L Engine – If Equipped This engine is designed to meet all emis- sions r egulations and provide excellent fuel economy and performance when using high-quality unleaded “regular” gasoline having an octane rating of 87. The use of premium gasoline is not recommended, as it will not provide any benefit over regular gasoline [...]

Reformulated Gasoline Many areas of the country requir e the use of cleaner burning gasoline r eferred to as “Reformulated Gasoline.” Reformulated gasolines contain oxygenates and are spe- cifically blended to reduce vehicle emissions and im- prove air quality . The manufactur er supports the use of r eformulated gaso- lines. Properly blended r[...]

If a Non-FFV vehicle is inadvertently fueled with E-85 fuel, the engine will have some or all of these symptoms: • operate in a lean mode • OBD II “Malfunction Indicator Light” on • poor engine performance • poor cold start and cold drivability • increased risk for fuel system component corrosion T o fix a Non-FFV vehicle inadvertentl[...]

Materials Added T o Fuel All gasoline sold in the United States is requir ed to contain effective detergent additives. Use of additional deter gents or other additives is not needed under normal conditions and they would result in additional cost. Therefore, you should not have to add anything to the fuel. Fuel System Cautions CAUTION! Follow these[...]

Carbon Monoxide Warnings W ARNING! Carbon monoxide (CO) in exhaust gases is deadly . Follow the precautions below to prevent carbon monoxide poisoning: • Do not inhale exhaust gases. They contain carbon monoxide, a colorless and odorless gas, which can kill. Never run the engine in a closed area, such as a garage, and never sit in a parked vehicl[...]

FLEXIBLE FUEL (3.6L ENGINE ONL Y) — IF EQUIPPED E-85 General Information The information in this section is for Flexible Fuel ve- hicles only . These vehicles can be identified by a unique fuel filler door label that states Ethanol (E-85) or Un- leaded Gasoline Only . This section only covers those subjects that are unique to these vehicles. Plea[...]

Ethanol Fuel (E-85) E-85 is a mixture of appr oximately 85% fuel ethanol and 15% unleaded gasoline. W ARNING! Ethanol vapors are extremely flammable and could cause serious personal injury . Never have any smok- ing materials lit in or near the vehicle when remov- ing the fuel filler tube cap (gas cap) or filling the tank. Do not use E-85 as a clea[...]

When you do switch fuel types it is recommended that: • you do not add less than 5 gallons (19 Liters) when refueling • you drive the vehicle immediately after r efueling for at least 5 miles (8 km) Observing these pr ecautions will avoid possible hard starting and/or significant deterioration in driveability during warm up. NOTE: • Use seaso[...]

Starting The characteristics of E-85 fuel make it unsuitable for use when ambient temperatures fall below 0°F (-18°C). In the range of 0°F (-18°C) to 32°F (0°C), you may experience an increase in the time it takes for your engine to start, and a deterioration in driveability (sags and/or hesitations) until the engine is fully warmed up. NOTE:[...]

ADDING FUEL Fuel Filler Cap (Gas Cap) The gas cap is located behind the locking fuel filler door , on the driver’s side of the vehicle. If the gas cap is lost or damaged, be sur e the replacement cap is for use with this vehicle. 1. Press the fuel filler door r elease switch (located under the headlamp switch). 2. Open the fuel filler door , and [...]

CAUTION! • Damage to the fuel system or emission control system could result from using an improper fuel cap (gas cap). A poorly fitting cap could let impu- rities into the fuel system. Also, a poorly fitting aftermarket cap can cause the “Malfunction Indi- cator Light (MIL)” to illuminate, due to fuel vapors escaping from the system. • A p[...]

W ARNING! • Never have any smoking materials lit in or near the vehicle when the gas cap is removed or the tank is being filled. • Never add fuel when the engine is running. This is in violation of most state and federal fire regula- tions and may cause the malfunction indicator light to turn on. • A fire may result if gasoline is pumped into[...]

5. Pull the release cable. Loose Fuel Filler Cap Message If the vehicle diagnostic system determines that the fuel filler cap is loose, improperly installed, or damaged, a loose gascap indicator will display in the EVIC telltale display area. Refer to “Electronic V ehicle Information Center (EVIC)” in “Understanding Y our Instrument Panel” [...]

Gross V ehicle W eight Rating (GVWR) The GVWR is the total permissible weight of your vehicle including driver , passengers, vehicle, options and cargo. The label also specifies maximum capacities of fr ont and rear axle systems (GA WR). T otal load must be limited so GVWR and front and rear GA WR are not exceeded. Payload The payload of a vehicle [...]

Curb W eight The curb weight of a vehicle is defined as the total weight of the vehicle with all fluids, including vehicle fuel, at full capacity conditions, and with no occupants or cargo loaded into the vehicle. The front and rear curb weight values are determined by weighing your vehicle on a commercial scale before any occupants or cargo are ad[...]

TRAILER TOWING In this section you will find safety tips and information on limits to the type of towing you can reasonably do with your vehicle. Before towing a trailer , carefully review this information to tow your load as efficiently and safely as possible. T o maintain warranty coverage, follow the requir ements and recommendations in this man[...]

W ARNING! (Continued) you use a standard weight-carrying hitch, you could lose control of your vehicle and cause a collision. Gross Combination W eight Rating (GCWR) The GCWR is the total permissible weight of your vehicle and trailer when weighed in combination. NOTE: The GCWR rating includes a 150 lbs (68 kg) allowance for the presence of a drive[...]

T railer Sway Control The trailer sway contr ol can be a mechanical telescoping link that can be installed between the hitch receiver and the trailer tongue that typically provides adjustable fric- tion associated with the telescoping motion to dampen any unwanted trailer swaying motions while traveling. If equipped, the electr onic T railer Sway C[...]

W ARNING! • An improperly adjusted weight-distributing hitch system may reduce handling, stability , and braking performance, and could result in a collision. • W eight-distributing hitch systems may not be compat- ible with Surge Brake Couplers. Consult with your hitch and trailer manufacturer or a reputable Recre- ational V ehicle dealer for [...]

W ith W eight-Distributing Hitch (Correct) Improper Adjustment Of W eight-Distributing Hitch (Incorrect) 574 ST ARTING AND OPERA TING I n f o r m a t i o n P r o v i d e d b y :[...]

T railer Hitch Classification The following chart provides the industry standard for the maximum trailer weight a given trailer hitch class can tow and should be used to assist you in selecting the correct trailer hitch for your intended towing condition. T railer Hitch Classification Definitions Class Max. T railer Hitch In- dustry Standards Class[...]

T railer T owing Weights (Maximum T railer Weight Ratings) The following chart provides the maximum trailer weight ratings towable for your given drivetrain. Engine Model Frontal Area Max. GTW (Gross T railer Wt.) Max. T railer T ongue Wt. (See Note) 3.6L 4x2 40 sq ft (3.72 sq m) 5,000 lbs (2 268 kg) 500 lbs (227 kg) 3.6L 4x4 40 sq ft (3.72 sq m) 5[...]

NOTE: The trailer tongue weight must be considered as part of the combined weight of occupants and cargo, and should never exceed the weight refer enced on the T ire and Loading Information placard. Refer to “T ire Safety Information” in “Starting and Operating” for further information. The addition of passengers and cargo may requir e redu[...]

• The weight of any other type of cargo or equipment put in or on your vehicle • The weight of the driver and all passengers. NOTE: Remember that everything put into or on the trailer adds to the load on your vehicle. Also, additional factory-installed options or dealer-installed options must be considered as part of the total load on your vehi[...]

W ARNING! Improper towing can lead to a collision. Follow these guidelines to make your trailer towing as safe as possible: • Make certain that the load is secured in the trailer and will not shift during travel. When trailering cargo that is not fully secured, dynamic load shifts can occur that may be dif ficult for the driver to control. Y ou c[...]

W ARNING! (Continued) • T otal weight must be distributed between the tow vehicle and the trailer such that the following four ratings are not exceeded: 1. GVWR 2. GTW 3. GA WR 4. T railer tongue weight rating for the trailer hitch utilized . T owing Requirements – T ires • Do not attempt to tow a trailer while using a compact spare tire. •[...]

T owing Requirements – T railer Brakes • Do not interconnect the hydraulic brake system or vacuum system of your vehicle with that of the trailer . This could cause inadequate braking and possible personal injury . • An electronically actuated trailer brake controller is requir ed when towing a trailer with electronically actuated brakes. Whe[...]

W ARNING! (Continued) • T owing any trailer will increase your stopping distance. When towing you should allow for addi- tional space between your vehicle and the vehicle in front of you. Failure to do so could result in an accident. T owing Requirements – T railer Lights And Wiring Whenever you pull a trailer , regar dless of the trailer size,[...]

Four-Pin Connector 1 — Female Pins 4 — Park 2 — Male Pin 5 — Left Stop/T urn 3 — Ground 6 — Right Stop/T urn Seven-Pin Connector 1 — Battery 5 — Ground 2 — Backup Lamps 6 — Left Stop/T urn 3 — Right Stop/T urn 7 — Running Lamps 4 — Electric Brakes 5 ST ARTING AND OPERA TING 583 I n f o r m a t i o n P r o v i d e d b y :[...]

T owing Tips Before setting out on a trip, practice turning, stopping and backing the trailer up in an area away from heavy traffic. Automatic T ransmission The DRIVE range can be selected when towing. The transmission controls include an adaptive drive strategy to avoid frequent shifting when towing. However , if frequent shifting does occur while[...]

Cooling System T o reduce potential for engine and transmission over - heating, take the following actions: City Driving When stopped for short periods of time, shift the trans- mission into NEUTRAL and increase engine idle speed. Highway Driving Reduce speed. Air Conditioning T urn off temporarily . SNOW PLOW Snow plows, winches, and other afterma[...]

RECREA TIONAL TOWING (BEHIND MOTORHOME, ETC.) T owing This V ehicle Behind Another V ehicle T owing Condition Wheel OFF the Ground T wo-Wheel Drive Models Four -Wheel Drive Models Flat T ow NONE NOT ALLOWED See Instructions • T ransmission in P ARK • T ransfer case in NEUTRAL (N) • T ow in forward direction Dolly T ow Front NOT ALLOWED NOT AL[...]

NOTE: V ehicles equipped with Quadra-Lift™ must be lowered to the “Park” (lowest) level, and have automatic leveling disabled, befor e tying them down (from the body) on a trailer or flatbed truck. Refer to “Quadra- Lift™ – If Equipped” in “Starting and Operating” for more information. If the vehicle cannot be lowered to the “Pa[...]

CAUTION! T owing with the rear wheels on the ground will cause severe transmission damage. Damage from improper towing is not covered under the New V ehicle Limited W arranty . Recreational T owing – Quadra-T rac I 姞 (Single-Speed T ransfer Case) Four-Wheel Drive Models Recreational towing is not allowed. These models do not have a NEUTRAL (N) [...]

CAUTION! • Front or rear wheel lifts must not be used. Internal damage to the transmission or transfer case will occur if a front or rear wheel lift is used when recreational towing. • T ow only in a forward direction. T owing this ve- hicle backwards can cause severe damage to the transfer case. • The transmission must be in P ARK for recrea[...]

W ARNING! (Continued) position disengages both the front and rear drive- shafts from the powertrain and will allow the vehicle to move, even if the transmission is in P ARK. The parking brake should always be applied when the driver is not in the vehicle. Use the following procedure to prepar e your vehicle for recr eational towing. CAUTION! It is [...]

7. Using the point of a ballpoint pen or similar object, press and hold the recessed transfer case NEUTRAL (N) button (located by the selector switch) for four seconds. The light behind the N symbol will blink, indicating shift in progress. The light will stop blinking (stay on solid) when the shift to NEUTRAL (N) is complete. A “FOUR WHEEL DRIVE[...]

1 1. Release the brake pedal for five seconds and ensure that there is no vehicle movement. 12. T urn the engine OFF , then turn the ignition switch back to the ON/RUN position without starting the engine. 13. Firmly apply the parking brake. 14. Shift the transmission into P ARK. CAUTION! Damage to the transmission may occur if the trans- mission i[...]

• A flashing NEUTRAL (N) position indicator light indicates that shift requir ements have not been met. Shifting Out Of NEUTRAL (N) Use the following procedure to prepar e your vehicle for normal usage. 1. Bring the vehicle to a complete stop, leaving it con- nected to the tow vehicle. 2. Firmly apply the parking brake. 3. Reconnect the negative [...]

NOTE: When shifting out of transfer case NEU- TRAL (N), turning the engine OFF may be required to avoid gear clash. 9. After the NEUTRAL (N) indicator light turns off, release the NEUTRAL (N) button. 10. After the NEUTRAL (N) button has been released, the transfer case will shift to the position indicated by the selector switch. 1 1. Shift the tran[...]

NOTE: • Steps 1 through 7 are requirements that must be met prior to pressing the NEUTRAL (N) button, and must continue to be met until the shift has been completed. If any of these requir ements are not met prior to pressing the NEUTRAL (N) button or are no longer met during the shift, the NEUTRAL (N) indicator light will flash continuously unti[...]

I n f o r m a t i o n P r o v i d e d b y :[...]

WHA T T O DO IN EMERGENCIES CONTENTS 䡵 HAZARD W ARNING FLASHERS .......... .598 䡵 IF YOUR ENGINE OVERHEA TS ........... .598 䡵 JACKING AND TIRE CHANGING ......... .599 ▫ Jack Location ....................... .600 ▫ Spare T ire Stowage ................... .600 ▫ Preparations For Jacking ............... .601 ▫ Jacking Instructions .....[...]

HAZARD W ARNING FLASHERS The Hazar d W arning flasher switch is located on the switch bank just above the climate controls. Press the switch to turn on the Hazard W arning flasher . When the switch is activated, all direc- tional turn signals will flash on and off to warn oncoming traffic of an emergency . Press the switch a second time to turn off[...]

CAUTION! Driving with a hot cooling system could damage your vehicle. If the temperature gauge reads HOT (H), pull over and stop the vehicle. Idle the vehicle with the air conditioner turned off until the pointer drops back into the normal range. If the pointer remains on HOT (H), and you hear continuous chimes, turn the engine off immediately and [...]

W ARNING! (Continued) • The jack is designed to be used as a tool for changing tires only . The jack should not be used to lift the vehicle for service purposes. The vehicle should be jacked on a firm level surface only . A void ice or slippery areas. Jack Location The scissor-type jack and tire changing tools are located in rear cargo area, belo[...]

Preparations For Jacking 1. Park the vehicle on a firm, level surface. A void ice or slippery surfaces. W ARNING! Do not attempt to change a tire on the side of the vehicle closest to moving traf fic, pull far enough off the road to avoid being hit when operating the jack or changing the wheel. 2. T urn on the Hazard W arning flasher . 3. Set the p[...]

Jacking Instructions W ARNING! Carefully follow these tire changing warnings to help prevent personal injury or damage to your vehicle: • Always park on a firm, level surface as far from the edge of the roadway as possible before raising the vehicle. • T urn on the Hazard W arning flasher . • Block the wheel diagonally opposite the wheel to b[...]

CAUTION! Do not attempt to raise the vehicle by jacking on locations other than those indicated in the Jacking Instructions for this vehicle. 1. Remove the spare tire, jack, and tools from storage. 2. Loosen (but do not remove) the wheel lug nuts by turning them to the left, one turn, while the wheel is still on the ground. 3. Assemble the jack and[...]

CAUTION! Do not attempt to raise vehicle by jacking on loca- tions other than those indicated in the Jacking In- structions for this vehicle. 4. For the front axle, place the jack on the body flange just behind the front tire as indicated by the triangular lift point symbol on the sill molding. Do not raise the vehicle until you are sure the jack i[...]

5. For a r ear tir e, place the jack in the slot on the rear tie-down bracket, just forward of the rear tir e (as indicated by the triangular lift point symbol on the sill molding). Do not raise the vehicle until you are sure the jack is fully engaged. Front Jacking Location Lift Point Symbol On Sill Molding 6 WHA T TO DO IN EMERGENCIES 605 I n f o[...]

6. Raise the vehicle by turning the jack screw clockwise. Raise the vehicle only until the tir e just clears the surface and enough clearance is obtained to install the spare tire. Minimum tire lift provides maximum stability . W ARNING! Raising the vehicle higher than necessary can make the vehicle less stable. It could slip off the jack and hurt [...]

CAUTION! Be sure to mount the spare tire with the valve stem facing outward. The vehicle could be damaged if the spare tire is mounted incorrectly . W ARNING! T o avoid the risk of forcing the vehicle off the jack, do not tighten the lug nuts fully until the vehicle has been lowered. Failure to follow this warning may result in personal injury . 9.[...]

11 . Lower the jack to the fully closed position and r eturn it and the tools to the proper positions in the foam tray . 12. Remove the small center cap and securely store the road wheel in the cargo ar ea. 13. Have the aluminum road wheel and tire repaired as soon as possible, properly secure the spare tire with the special wing nut torqued to 3.7[...]

2. Install the remaining lug nuts with the cone shaped end of the nut toward the wheel. Lightly tighten the lug nuts. W ARNING! T o avoid the risk of forcing the vehicle off the jack, do not tighten the lug nuts fully until the vehicle has been lowered. Failure to follow this warning may result in personal injury . 3. Lower the vehicle to the groun[...]

CAUTION! Do not use a portable battery booster pack or any other booster source with a system voltage greater than 12 V olts or damage to the battery , starter motor , alternator or electrical system may occur . W ARNING! Do not attempt jump-starting if the battery is frozen. It could rupture or explode and cause personal injury . Preparations For [...]

W ARNING! • T ake care to avoid the radiator cooling fan when- ever the hood is raised. It can start anytime the ignition switch is ON. Y ou can be injured by moving fan blades. • Remove any metal jewelry such as watch bands or bracelets that might make an inadvertent electrical contact. Y ou could be seriously injured. • Batteries contain su[...]

Jump-Starting Procedure W ARNING! Failure to follow this procedure could result in per- sonal injury or property damage due to battery ex- plosion. CAUTION! Failure to follow these procedures could result in damage to the charging system of the booster vehicle or the discharged vehicle. 1. Connect the positive (+) end of the jumper cable to the rem[...]

Once the engine is started, remove the jumper cables in the reverse sequence: 6. Disconnect the negative (-) jumper cable from the remote negative (-) post of the discharged vehicle. 7. Disconnect the negative end (-) of the jumper cable from the negative (-) post of the booster battery . 8. Disconnect the opposite end of the positive (+) jumper ca[...]

NOTE: Press the ⬙ ESC Off ⬙ switch, to place the Electronic Stability Control (ESC) system in ⬙ Partial Off ⬙ mode, before rocking the vehicle. Refer to “Electronic Brake Control” in “Starting And Operating” for further infor- mation. Once the vehicle has been freed, press the ⬙ ESC Off ⬙ switch again to restor e ⬙ ESC On ⬙ [...]

W ARNING! (Continued) explode and injure someone. Do not spin your vehi- cle’s wheels faster than 30 mph (48 km/h) or for longer than 30 seconds continuously without stop- ping when you are stuck and do not let anyone near a spinning wheel, no matter what the speed. EMERGENCY TOW HOOKS — IF EQUIPPED If your vehicle is equipped with tow hooks, t[...]

SHIFT LEVER OVERRIDE If a malfunction occurs and the shift lever cannot be moved out of the P ARK position, you can use the following procedure to temporarily move the shift lever: 1. T urn the engine OFF . 2. Firmly apply the parking brake. 3. Remove the rubber liner from the cupholder (located next to the shifter on the center console). 4. Using [...]

5. Press and maintain firm pressur e on the brake pedal. 6. Insert the screwdriver or similar tool into the access hole, and push and hold the override release lever down. 7. Move the shift lever to the NEUTRAL position. 8. The vehicle may then be started in NEUTRAL. 9. Reinstall the shift lever override access cover and cupholder liner . TOWING A [...]

T owing Condition Wheels OFF the Ground 2WD Models 4WD Models Flat T ow NONE If transmission is operable: • T ransmission in NEUTRAL • 30 mph (48 km/h) max speed • 15 miles (24 km) max distance See instructions in “Recreational T owing” under “Starting and Operating” • T ransmission in P ARK • T ransfer Case in NEUTRAL • To w i [...]

If you must use the accessories (wipers, defrosters, etc.) while being towed, the ignition must be in the ON/RUN position, not the ACC position. If the vehicle’s battery is discharged, refer to “Shift Lever Override” in “What to Do in Emergencies” for instruc- tions on shifting the automatic transmission out of the P ARK position for towi[...]

• The towing distance must not exceed 15 miles (24 km) for 6-speed transmission, or 30 miles (48 km) for 8-speed transmission. If the transmission is not operable, or the vehicle must be towed faster than 30 mph (48 km/h) or farther than 15 miles (24 km), for 6-speed transmission, or 30 miles (48 km) for 8-speed transmission tow with the rear whe[...]

If flatbed equipment is not available, and the transfer case is operable, vehicles with a two-speed transfer case may be towed (in the forward direction, with ALL wheels on the gr ound), IF the transfer case is in NEUTRAL and the transmission is in P ARK . Refer to “Recreational T owing” in “Starting And Operating” for detailed in- structio[...]

I n f o r m a t i o n P r o v i d e d b y :[...]

MAINT AINING YOUR VEHICLE CONTENTS 䡵 ENGINE COMP AR TMENT — 3.6L ......... .625 䡵 ENGINE COMP AR TMENT — 5.7L ......... .626 䡵 ONBOARD DIAGNOSTIC SYSTEM (OBD II) . . .627 ▫ Loose Fuel Filler Cap Message ........... .627 䡵 EMISSIONS INSPECTION AND MAINTENANCE PROGRAMS ......................... .628 䡵 REPLACEMENT P AR TS .............[...]

▫ Front/Rear Axle Fluid ................. .652 ▫ T ransfer Case ....................... .653 ▫ Automatic T ransmission ............... .654 ▫ Appearance Care And Protection From Corrosion .......................... .658 䡵 FUSES ............................. .664 ▫ T otally Integrated Power Module ......... .664 䡵 VEHICLE STORAGE .....[...]

ENGINE COMP ARTMENT — 3.6L 1 — T otally Integrated Power Module (Fuses) 6 — Air Cleaner Filter 2 — Engine Oil Dipstick 7 — W asher Fluid Reservoir 3 — Engine Oil Fill 8 — Coolant Pressure Cap (Radiator) 4 — Brake Fluid Reservoir 9 — Engine Coolant Reservoir 5 — Power Steering Fluid Reservoir 7 MAINT AINING YOUR VEHICLE 625 I n f[...]

ENGINE COMP ARTMENT — 5.7L 1 — T otally Integrated Power Module (Fuses) 6 — W asher Fluid Reservoir 2 — Automatic T ransmission Dipstick 7 — Engine Oil Dipstick 3 — Engine Oil Fill 8 — Coolant Pressure Cap (Radiator) 4 — Brake Fluid Reservoir 9 — Engine Coolant Reservoir 5 — Air Cleaner Filter 626 MAINT AINING YOUR VEHICLE I n f[...]

ONBOARD DIAGNOSTIC SYSTEM (OBD II) Y our vehicle is equipped with a sophisticated onboar d diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and automatic transmission control systems. When these systems are operating properly , your vehicle will provide excellent performance and fuel economy , as well [...]

Refer to “Electronic V ehicle Information Center (EVIC) in “Understanding Y our Instrument Panel” for further in- formation. T ighten the fuel filler cap properly and press the SELECT button to turn off the message. If the problem continues, the message will appear the next time the vehicle is started. A loose, improperly installed, or damage[...]

4. Approximately 15 seconds later , one of two things will happen: • The MIL will flash for about 10 seconds and then return to being fully illuminated until you turn OFF the ignition or start the engine. This means that your vehicle’s OBD II system is not ready and you should not proceed to the I/M station. • The MIL will not flash at all an[...]

available which include detailed service information for your vehicle. Refer to these Service Manuals before attempting any procedure yourself. NOTE: Intentional tampering with emissions control systems may void your warranty and could r esult in civil penalties being assessed against you. W ARNING! Y ou can be badly injured working on or around a [...]

CAUTION! (Continued) • Y our vehicle has been built with improved fluids that protect the performance and durability of your vehicle and also allow extended maintenance inter- vals. Do not use chemical flushes in these compo- nents as the chemicals can damage your engine, transmission, power steering or air conditioning. Such damage is not covere[...]

Change Engine Oil The oil change indicator system will remind you that it is time to take your vehicle in for scheduled maintenance. Refer to the “Maintenance Schedule” for further informa- tion. NOTE:Under no circumstances should oil change inter - vals exceed 10,000 miles (16,000 km) or twelve months, whichever occurs first. Engine Oil Select[...]

Engine Oil V iscosity – 3.6L Engine SAE 5W -20 engine oil is recommended for all operating temperatures. This engine oil improves low temperature starting and vehicle fuel economy . The engine oil filler cap also shows the recommended engine oil viscosity for your engine. For information on engine oil filler cap location, refer to the “Engine C[...]

the engine oil. Engine oil is an engineered pr oduct and its performance may be impaired by supplemental addi- tives. Disposing Of Used Engine Oil And Oil Filters Care should be taken in disposing of used engine oil and oil filters from your vehicle. Used oil and oil filters, indiscriminately discar ded, can pr esent a pr oblem to the environment. [...]

Engine Air Cleaner Filter Selection The quality of replacement engine air cleaner filters varies considerably . Only high quality filters should be used to assure most efficient service. MOP AR 威 engine air cleaner filters ar e a high quality filter and are r ecom- mended. Maintenance-Free Battery Y our vehicle is equipped with a maintenance-fr e[...]

CAUTION! • It is essential when replacing the cables on the battery that the positive cable is attached to the positive post and the negative cable is attached to the negative post. Battery posts are marked positive (+) and negative (-) and are identified on the battery case. Cable clamps should be tight on the terminal posts and free of corrosio[...]

W ARNING! • Use only refrigerants and compressor lubricants approved by the manufacturer for your air condi- tioning system. Some unapproved refrigerants are flammable and can explode, injuring you. Other unapproved refrigerants or lubricants can cause the system to fail, requiring costly repairs. Refer to W arranty Information Book, located on t[...]

A/C Air Filter Refer to the “Maintenance Schedule” for the proper maintenance intervals. W ARNING! Do not remove the A/C air filter while the blower is operating or personal injury may result. The A/C air filter is located in the fresh air inlet behind the glove box. Perform the following procedure to re- place the filter: 1. Open the glove com[...]

6. Install the A/C air filter with the arrow on the filter pointing towar d the floor . When installing the filter cover , make sure the retaining tabs fully engage the cover . CAUTION! The A/C air filter is identified with an arrow to indicate airflow direction through the filter . Failure to properly install the filter will result in the need to [...]

Operation of the wipers on dry glass for long periods may cause deterioration of the wiper blades. Always use washer fluid when using the wipers to r emove salt or dirt from a dry windshield. A void using the wiper blades to remove frost or ice from the windshield. Keep the blade r ubber out of contact with petroleum products such as engine oil, ga[...]

3. Grab the bottom of the wiper blade and rotate it forward to unsnap the blade pivot pin from the wiper blade holder . 4. Install the wiper blade pivot pin into the wiper blade holder at the end of the wiper arm, and firmly press the wiper blade until it snaps into place. 5. Lower the wiper blade and snap the pivot cap into place. Adding W asher F[...]

clean the wiper blades, this will help blade performance. T o prevent fr eeze-up of your windshield washer system in cold weather , select a solution or mixture that meets or exceeds the temperature range of your climate. This rating information can be found on most washer fluid containers. W ARNING! Commercially available windshield washer solvent[...]

W ARNING! • Exhaust gases can injure or kill. They contain carbon monoxide (CO), which is colorless and odorless. Breathing it can make you unconscious and can eventually poison you. T o avoid breathing CO, refer to “Safety T ips/Exhaust Gas” in “Things T o Know Before Starting Y our V ehicle” for further information. • A hot exhaust sy[...]

Under normal operating conditions, the catalytic converter will not require maintenance. However , it is important to keep the engine properly tuned to assure proper catalyst operation and prevent possible catalyst damage. NOTE: Intentional tampering with emissions control systems can result in civil penalties being assessed against you. In unusual[...]

Engine Coolant Checks Check the engine coolant (antifreeze) protection every 12 months (before the onset of freezing weather , where applicable). If the engine coolant (antifreeze) is dirty or rusty in appearance, the system should be drained, flushed and refilled with fresh engine coolant (anti- freeze). Check the front of the A/C condenser for an[...]

Selection Of Coolant Refer to “Fluids, Lubricants, and Genuine Parts” in “Maintaining Y our V ehicle” for further information. CAUTION! • Mixing of engine coolant (antifreeze) other than specified Organic Additive T echnology (OA T) en- gine coolant (antifreeze), may result in engine damage and may decrease corrosion protection. Organic A[...]

Please review these recommendations for using Organic Additive T echnology (OA T) engine coolant (antifreeze). When adding engine coolant (antifreeze): • W e recommend using MOP AR 威 Antifreeze/Coolant 10 Y ear/150,000 Mile Formula OA T (Organic Additive T echnology). • Mix a minimum solution of 50% OA T engine coolant and distilled water . U[...]

W ARNING! • The warning words “DO NOT OPEN HOT” on the cooling system pressure cap are a safety precaution. Never add engine coolant (antifreeze) when the engine is overheated. Do not loosen or remove the cap to cool an overheated engine. Heat causes pressure to build up in the cooling system. T o prevent scalding or injury , do not remove th[...]

When additional engine coolant (antifreeze) is needed to maintain the proper level, it should be added to the coolant bottle. Do not overfill. Points T o Remember NOTE: When the vehicle is stopped after a few miles/ kilometers of operation, you may observe vapor coming from the front of the engine compartment. This is nor- mally a result of moistur[...]

• Do not change the thermostat for Summer or W inter operation. If replacement is ever necessary , install ONL Y the corr ect type thermostat. Other designs may result in unsatisfactory engine coolant (antifreeze) performance, poor gas mileage, and increased emissions. Brake System In order to assure brake system performance, all brake system com[...]

W ith disc brakes, the fluid level can be expected to fall as the brake linings wear . However , an unexpected drop in fluid level may be caused by a leak and a system check should be conducted. Refer to “Fluids, Lubricants, and Genuine Parts” in “Maintaining Y our V ehicle” for further information. W ARNING! • Use only manufacturer’s r[...]

W ARNING! (Continued) • Do not allow petroleum based fluid to contaminate the brake fluid. Brake seal components could be damaged, causing partial or complete brake failure. This could result in a collision. Front/Rear Axle Fluid For normal service, periodic fluid level checks are not requir ed. When the vehicle is serviced for other reasons the [...]

CAUTION! Do not over tighten the plugs as it could damage then and cause them to leak. Selection Of Lubricant Use only the manufacturer’s recommended fluid. Refer to “Fluids, Lubricants, and Genuine Parts” in “Maintain- ing Y our V ehicle” for further information. T ransfer Case Fluid Level Check For normal service, periodic fluid level c[...]

Automatic T ransmission Selection Of Lubricant It is important to use the pr oper transmission fluid to ensure optimum transmission performance and life. Use only the manufacturer’s recommended transmission fluid. Refer to “Fluids, Lubricants, and Genuine Parts” in “Maintaining Y our V ehicle” for fluid specifications. It is important to [...]

CAUTION! Do not use chemical flushes in your transmission as the chemicals can damage your transmission compo- nents. Such damage is not covered by the New V ehicle Limited W arranty . Fluid Level Check – 3.6L Engine The fluid level is preset at the factory and does not requir e adjustment under normal operating conditions. Routine fluid level ch[...]

Fluid Level Check – 5.7L Engine It is best to check the fluid level when the transmission is at normal operating temperature (approximately 180°F / 82°C). This occurs after at least 15 miles (25 km) of driving. At normal operating temperature the fluid can- not be held comfortably between the fingertips. Use the following procedure to check the[...]

NOTE: If it is necessary to check the transmission below the operating temperature, the fluid level should be between the two “COLD” (lower) holes on the dipstick with the fluid at approximately 70°F (21°C) (room tem- perature). If the fluid level is corr ectly established at room temperature, it should be between the “HOT” (upper) refere[...]

Appearance Care And Protection From Corrosion Protection Of Body And Paint From Corrosion V ehicle body care requirements vary according to geo- graphic locations and usage. Chemicals that make roads passable in snow and ice, and chemicals that are sprayed on trees and road surfaces during other seasons, are highly corrosive to the metal in your ve[...]

• If insects, tar , or other similar deposits have accumu- lated on your vehicle, use MOP AR 威 Super Kleen Bug and T ar Remover to remove. • Use a high quality cleaner wax, such as MOP AR 威 Cleaner W ax to remove r oad film, stains and to protect your paint finish. T ake car e never to scratch the paint. • A void using abrasive compounds [...]

• If you carry special cargo such as chemicals, fertilizers, de-icer salt, etc., be sure that such materials are well packaged and sealed. • If a lot of driving is done on gravel roads, consider mud or stone shields behind each wheel. • Use MOP AR 威 T ouch Up Paint on scratches as soon as possible. Y our authorized dealer has touch up paint[...]

• For tough stains, apply MOP AR 威 T otal Clean, or a mild soap solution to a clean, damp cloth and remove stain. Use a fresh, damp towel to remove soap r esidue. • For grease stains, apply MOP AR 威 Multi-Purpose Cleaner to a clean, damp cloth and remove stain. Use a fresh, damp towel to remove soap residue. • Do not use any harsh solvent[...]

Cleaning Headlights Y our vehicle is equipped with plastic headlights and fog lights (if equipped) that are lighter and less susceptible to stone breakage than glass headlights. Plastic is not as scratch resistant as glass and therefore differ ent lens cleaning procedures must be followed. T o minimize the possibility of scratching the lenses and r[...]

Cleaning Plastic Instrument Cluster Lenses The lenses in front of the instruments in this vehicle are molded in clear plastic. When cleaning the lenses, care must be taken to avoid scratching the plastic. 1. Clean with a wet soft rag. A mild soap solution may be used, but do not use high alcohol content or abrasive cleaners. If soap is used, wipe c[...]

FUSES T otally Integrated Power Module The T otally Integrated Power Module is located in the engine compartment. This center contains cartridge fuses and mini fuses. A description of each fuse and compo- nent may be stamped on the inside cover , otherwise the cavity number of each fuse is stamped on the inside cover that corresponds to the followi[...]

Cavity Car- tridge Fuse Mini Fuse Description J02 30 Amp Pink Power Liftgate Module J03 30 Amp Pink T railer T ow J04 25 Amp Natural Driver Door Node J05 25 Amp Natural Passenger Door Node J06 40 Amp Green Antilock Brakes Pump/Stability Control System J07 30 Amp Pink Antilock Brakes V alve/Stability Control System Cavity Car- tridge Fuse Mini Fuse [...]

Cavity Car- tridge Fuse Mini Fuse Description J15 40 Amp Green Front Cabin Fan/ Blower J17 40 Amp Green Starter Motor Sole- noid J18 20 Amp Blue Powertrain Control Module/Powertrain Control Module T ransmission Range J19 60 Amp Y ellow Radiator Fan Motor HI/Radiator Fan Motor Low J20 30 Amp Pink Front W iper Cavity Car- tridge Fuse Mini Fuse Descri[...]

Cavity Car- tridge Fuse Mini Fuse Description M6 20 Amp Y ellow Cigar Lighter M7 20 Amp Y ellow Power Outlet #2 (Switchable) M8 20 Amp Y ellow Front Heated Seat & Steering Wheel M9 20 Amp Y ellow Rear Heated Seats M10 15 Amp Blue V ideo/Universal Garage Door Opener Cavity Car- tridge Fuse Mini Fuse Description M1 1 10 Amp Red Heating, V entilat[...]

Cavity Car- tridge Fuse Mini Fuse Description M15 20 Amp Y ellow Power Seat Module(s)/ Adaptive Cruise Control/Audio T elematics/ Daytime Running Lights Relay/Air Suspension Module/Instrument Cluster M16 10 Amp Red Occupant Restraint Controller M18 15 Amp Blue Stop Lamp Cavity Car- tridge Fuse Mini Fuse Description M19 25 Amp Natural Automatic Shut[...]

Cavity Car- tridge Fuse Mini Fuse Description M25 20 Amp Y ellow Fuel Pump Motor Output/Diesel Lift Pump (Export Only) M26 10 Amp Red Driver Door Switch Bank M27 10 Amp Red Ignition Switch/ W ireless Control Module/Keyless Entry Module M28 15 Amp Blue Powertrain Controller/ T ransmission Controller Cavity Car- tridge Fuse Mini Fuse Description M29 [...]

Cavity Car- tridge Fuse Mini Fuse Description M34 10 Amp Red Park Assist Module/Climate Control System Module/Infra Red Sensor/Compass Module M35 15 Amp Blue Left Rear Parklamps M36 20 Amp Y ellow Power Outlet M37 10 Amp Red Antilock Brakes/ Stability Control System Module M38 25 Amp Natural All Door Lock &Unlock CAUTION! • When installing th[...]

VEHICLE STORAGE If you are leaving your vehicle dormant for more than 21 days you may want to take steps to protect your battery . Y ou may: • Remove fuse #J13 in the T otally Integrated Power Module (TIPM) labeled Main Ignition-Off Draw (IOD). • Or , disconnect the negative cable from the battery . • Anytime you store your vehicle, or keep i[...]

Exterior Bulbs Bulb Number Headlamps (Low Beam) H1 1 Headlamps (High Beam) 9005 Headlamps (Low Beam) – High Intensity Discharge (HID) D1S (Serviced At Authorized Dealer) Daytime Running Lamp (DRL) 3157K Front Fog Lamps PSX24W Front Side Marker 194 Front Park/T urn Lamp 7444NA Aux Aperature Backup Lamps 7440 (W21W) Auxiliary Liftgate T ail Lamps W[...]

W ARNING! A transient high voltage occurs at the bulb sockets of High Intensity Discharge (HID) headlamps when the headlamp switch is turned ON. It may cause serious electrical shock or electrocution if not serviced prop- erly . See your authorized dealer for service. NOTE: On vehicles equipped with High Intensity Dis- charge (HID) headlamps , when[...]

CAUTION! Do not touch the new bulb with your fingers. Oil contamination will severely shorten bulb life. If the bulb comes in contact with any oily surface, clean the bulb with rubbing alcohol. Front Fog Lamps 1. Reach thr ough the cutout in the splash shield and disconnect the wiring harness from the fog lamp connector . 2. Firmly grasp the bulb b[...]

6. Firmly and evenly push the bulb straight into the lamp housing until both tabs snap firmly into place and ar e fully engaged. 7. Connect the wiring harness to the front fog lamp connector . Rear T ail, Stop, T urn Signal, And Backup Lamps 1. Raise the liftgate. 2. Remove the two push-pins from the tail lamp housing. 3. Grasp the tail lamp and pu[...]

Rear Liftgate Mounted T ail Lamp 1. Raise the liftgate. 2. Use a fiber stick or flat blade screw driver to pry the lower trim from the liftgate. 3. Once lower trim is loose, close the liftgate. 4. Open the flipper glass. 5. Pull up glass seal at bottom of window opening. 6. Remove small trim panel around liftgate glass striker . 7. Close flipper gl[...]

Center High-Mounted Stop Lamp (CHMSL) The center high-mounted stop lamp is an LED assembly . See your authorized dealer for replacement. Rear License Lamp 1. Use a screw driver to gently pry against the side of the snap tab to remove the license lamp lens. 2. Pull bulb from socket. 3. Replace bulb. 4. Reinstall lens. Center High-Mounted Stop Lamp 7[...]

FLUID CAP ACITIES U.S. Metric Fuel (Approximate) 3.6L and 5.7L Engines 25 Gallons 94 Liters Engine Oil With Filter 3.6L Engine (SAE 5W -20, API Certified) 6 Quarts 5.6 Liters 5.7L Engine (SAE 5W -20, API Certified) 7 Quarts 6.6 Liters Cooling System* 3.6L Engine (MOP AR 威 Antifreeze/Engine Coolant 10 Y ear/ 150,000 Mile Formula or equivalent) 10.[...]

FLUIDS, LUBRICANTS AND GENUINE P ARTS Engine Component Fluid, Lubricant, or Genuine Part Engine Coolant MOP AR 威 Antifreeze/Coolant 10 Y ear/150,000 Mile Formula OA T (Organic Additive T echnology) or equivalent meeting the requir ements of Chrysler Material Standard MS-12106. Engine Oil – 3.6L Engine Use API Certified SAE 5W -20 Engine Oil, me[...]

Chassis Component Fluid, Lubricant, or Genuine Part Automatic T ransmission MOP AR 威 A TF+4 威 Automatic T ransmission Fluid or equivalent licensed A TF+4 威 product. T ransfer Case – Single-Speed (Quadra-T rac I 威 ) Shell Automatic T ransmission Fluid 3353 or equivalent. T ransfer Case – T wo-Speed (Quadra-T rac II 威 ) MOP AR 威 A TF+[...]

Component Fluid, Lubricant, or Genuine Part Brake Master Cylinder MOP AR 威 DOT 3 Brake Fluid, SAE J1703 should be used. If DOT 3, SAE J1703 brake fluid is not available, then DOT 4 is acceptable. Use only recommended brake fluids or equivalent. Power Steering Reservoir – 3.6L Engine MOP AR 威 Hydraulic Fluid or equivalent meeting MS- 1 1655, s[...]

I n f o r m a t i o n P r o v i d e d b y :[...]

MAINTENANCE SCHEDULES CONTENTS 䡵 MAINTENANCE SCHEDULE ............ .684 ▫ Maintenance Chart .................... .686 8 M A I N T E N A N C E S C H E D U L E S I n f o r m a t i o n P r o v i d e d b y :[...]

MAINTENANCE SCHEDULE Y our vehicle is equipped with an automatic oil change indicator system. The oil change indicator system will remind you that it is time to take your vehicle in for scheduled maintenance. Based on engine operation conditions, the oil change indicator message will illuminate. This means that ser- vice is required for your vehicl[...]

Required Maintenance Refer to the Maintenance Schedules on the following pages for required maintenance. At Every Oil Change Interval As Indicated By Oil Change Indicator System: • Change oil and filter . • Rotate the tires. Rotate at the first sign of irregu- lar wear , even if it occurs before the oil indicator system turns on. • Inspect ba[...]

Maintenance Chart Mileage or time passed (whichever comes first) 20,000 30,000 40,000 50,000 60,000 70,000 80,000 90,000 100,000 1 10,000 120,000 130,000 140,000 150,000 Or Y ears: 2 3 4 5 6 7 8 9 10 1 1 12 13 14 15 Or Kilometers: 32,000 48,000 64,000 80,000 96,000 1 12,000 128,000 144,000 160,000 176,000 192,000 208,000 224,000 240,000 Additional [...]

Mileage or time passed (whichever comes first) 20,000 30,000 40,000 50,000 60,000 70,000 80,000 90,000 100,000 1 10,000 120,000 130,000 140,000 150,000 Or Y ears: 2 3 4 5 6 7 8 9 10 1 1 12 13 14 15 Or Kilometers: 32,000 48,000 64,000 80,000 96,000 1 12,000 128,000 144,000 160,000 176,000 192,000 208,000 224,000 240,000 Additional Maintenance Replac[...]

Mileage or time passed (whichever comes first) 20,000 30,000 40,000 50,000 60,000 70,000 80,000 90,000 100,000 1 10,000 120,000 130,000 140,000 150,000 Or Y ears: 2 3 4 5 6 7 8 9 10 1 1 12 13 14 15 Or Kilometers: 32,000 48,000 64,000 80,000 96,000 1 12,000 128,000 144,000 160,000 176,000 192,000 208,000 224,000 240,000 Change automatic transmission[...]

W ARNING! • Y ou can be badly injured working on or around a motor vehicle. Do only service work for which you have the knowledge and the right equipment. If you have any doubt about your ability to perform a service job, take your vehicle to a competent me- chanic. • Failure to properly inspect and maintain your ve- hicle could result in a com[...]

I n f o r m a t i o n P r o v i d e d b y :[...]

IF YOU NEED CONSUMER ASSIST ANCE CONTENTS 䡵 SUGGESTIONS FOR OBT AINING SER VICE FOR YOUR VEHICLE ...................... .693 ▫ Prepare For The Appointment ............ .693 ▫ Prepare A List ....................... .693 ▫ Be Reasonable W ith Requests ............ .693 䡵 IF YOU NEED ASSIST ANCE ............. .693 ▫ Chrysler Group LLC Cust[...]

䡵 DEP AR TMENT OF TRANSPOR T A TION UNIFORM TIRE QUALITY GRADES ................ .699 ▫ T readwear .......................... .699 ▫ T raction Grades ...................... .700 ▫ T emperature Grades ................... .700 692 IF YOU NEED CONSUMER ASSIST ANCE I n f o r m a t i o n P r o v i d e d b y :[...]

SUGGESTIONS FOR OBT AINING SERVICE FOR YOUR VEHICLE Prepare For The Appointment If you are having warranty work done, be sure to have the right papers with you. T ake your warranty folder . All work to be performed may not be covered by the warranty . Discuss additional charges with the service manager . Keep a maintenance log of your vehicle’s s[...]

facilities, factory-trained technicians, special tools, and the latest information to ensure the vehicle is fixed correctly and in a timely manner . This is why you should always talk to an authorized dealer service manager first. Most matters can be re- solved with this process. • If for some reason you are still not satisfied, talk to the gener[...]

In Mexico contact: A v . Prolongacion Paseo de la Reforma, 1240 Sante Fe C.P . 05109 Mexico, D. F . In Mexico City: 5081-7568 Outside Mexico City: 1-800-505-1300 Customer Assistance For The Hearing Or Speech Impaired (TDD/TTY) T o assist customers who have hearing dif ficulties, the manufacturer has installed special TDD (T elecommuni- cation Devic[...]

The manufacturer will not stand behind any service contract that is not the manufacturer’s service contract. It is not responsible for any service contract other than the manufacturer’s service contract. If you purchased a ser- vice contract that is not a manufacturer’s service contract, and you require service after the manufacturer’s New [...]

MOP AR 姞 P ARTS MOP AR 威 fluids, lubricants, parts, and accessories ar e available fr om an authorized dealer . They are recom- mended for your vehicle in or der to help keep the vehicle operating at its best. REPORTING SAFETY DEFECTS In The 50 United States And W ashington, D.C. If you believe that your vehicle has a defect that could cause a [...]

PUBLICA TION ORDER FORMS T o order the following manuals, you may use either the website or the phone numbers listed below . V isa, Mas- tercar d, American Express, and Discover orders are ac- cepted. If you prefer mailing your payment, please call for an order form. NOTE: A street address is requir ed when ordering manuals (no P .O. Boxes). Servic[...]

Call toll free at: • 1–800–890–4038 (U.S.) • 1–800–387–1 143 (Canada) Or V isit us on the W orldwide W eb at: • www .techauthority .com DEP ARTMENT OF TRANSPORT A TION UNIFORM TIRE QUALITY GRADES The following tir e grading categories wer e established by the National Highway T raffic Safety Administration. The specific grade rati[...]

T raction Grades The T raction grades, from highest to lowest, are AA, A, B, and C. These grades repr esent the tire’s ability to stop on wet pavement, as measured under controlled conditions on specified government test surfaces of asphalt and concrete. A tire marked C may have poor traction performance. W ARNING! The traction grade assigned to [...]

INDEX 10 I n f o r m a t i o n P r o v i d e d b y :[...]

Adaptive Cruise Control (ACC) (Cruise Control) . . .227 Adding Engine Coolant (Antifreeze) ........... .646 Adding Fuel ............................ .564 Additives, Fuel .......................... .558 Airbag .................................. 7 2 Airbag Deployment ........................ 8 3 Airbag Light ............................. 8 0 Airbag M[...]

Fluid and Filter Changes ................ .657 Fluid Change ........................ .657 Fluid Level Check ..................... .654 Fluid T ype .......................... .654 Special Additives ...................... .654 Autostick .............................. .468 Auxiliary Electrical Outlet (Power Outlet) ....... .287 Auxiliary Power Outlet [...]

Carbon Monoxide W arning .................. 1 1 5 Cargo Area Cover ........................ .301 Cargo Area Features ...................... .298 Cargo Compartment ...................... .298 Light .............................. .299 Cargo Light ............................ .299 Cargo T ie-Downs ........................ .302 Car W ashes ............[...]

Coolant Pressure Cap (Radiator Cap) .......... .647 Cooling System .......................... .644 Adding Coolant (Antifreeze) .............. .646 Coolant Capacity ...................... .678 Coolant Level ........................ .648 Disposal of Used Coolant ................ .648 Drain, Flush, and Refill ................. .645 Inspection ........[...]

Electrical Outlet, Auxiliary (Power Outlet) ....... .287 Electric Rear W indow Defrost ................ .305 Electric Remote Mirrors .................... .129 Electronic Brake Control System .............. .507 Brake Assist System .................... .509 Electronic Roll Mitigation (ERM) ............. .509 Electronic Speed Control (Cruise Control)[...]

Ethanol ............................... .556 Event Data Recorder ........................ 8 6 Exhaust Gas Caution ........................ 5 2 Exhaust System ........................... 1 1 5 Exterior Lights ........................... 1 1 8 Filters Air Cleaner .......................... .634 Air Conditioning ...................... .638 Engine Oil [...]

Systems ............................ .482 Four Wheel Drive Operation ................ .482 Freeing A Stuck V ehicle .................... .613 Front Axle (Differential) .................... .652 Fuel .................................. .555 Adding ............................. .564 Additives ........................... .558 Clean Air ................[...]

Gear Ranges ............................ .463 Gear Select Lever Override ................. .616 General Information ........................ 2 0 Glass Cleaning .......................... .662 Gross Axle W eight Rating .................. .571 Gross V ehicle W eight Rating ................. .570 GVWR ................................ .568 Hazard W arn[...]

Instrument Panel Lens Cleaning .............. .663 Integrated Power Module (Fuses) ............. .664 Interior Appearance Care ................... .661 Intermittent W ipers (Delay W ipers) ............ .216 Introduction .............................. 4 Inverter , Power .......................... .292 Jacking Instructions ....................... .60[...]

Bulb Replacement ..................... .672 C a r g o .............................. .299 Center Mounted Stop ................... .677 Daytime Running ..................... .206 Dimmer Switch, Headlight ............... .203 Electronic Stability Program (ESP) Indicator . . . .519 Exterior .............................. 1 1 8 F o g ..................[...]

Power Door ........................... 3 5 Lubrication, Body ........................ .639 Maintenance Free Battery ................... .635 Maintenance Procedures ................... .630 Maintenance Schedule ..................... .684 Malfunction Indicator Light (Check Engine) ...... .315 Manual, Service ......................... .698 Memory Feat[...]

Off-Road Driving (Off-Pavement) ............. .496 Oil Change Indicator ...................... .340 Oil Change Indicator , Reset ................. .340 Oil, Engine ............................. .631 Capacity ............................ .678 Change Interval ....................... .632 Dipstick ............................ .631 Disposal ...........[...]

Inverter ............................. .292 Lift Gate .............................. 4 9 Mirrors ............................. .129 Outlet (Auxiliary Electrical Outlet) ......... .287 Seats ............................... .178 Steering ............................ .501 Sunroof ............................. .280 T ilt/T elescoping Steering Column ..[...]

Refrigerant ............................. .637 Reminder , Seat Belt ......................... 6 9 Remote Control Starting System ......................... 3 0 Remote Keyless Entry (RKE) .................. 2 4 Remote Sound System (Radio) Controls ........ .428 Remote Starting System ...................... 3 0 Replacement Bulbs ......................[...]

[...]

Starting and Operating .................... .453 Starting Procedures ....................... .453 Steering Power .............................. .501 T ilt Column .......................... .220 Wheel, Heated ........................ .222 Wheel, T ilt .......................... .220 Steering Wheel Audio Controls .............. .428 Steering Wheel Mo[...]

Load Capacity ........................ .527 Pressur e Monitor System (TPMS) .......... .545 Pressur e W arning Light ................. .318 Quality Grading ...................... .699 Radial .............................. .535 Replacement ......................... .541 Rotation ............................ .544 Safety ..............................[...]

T ransmission Automatic ........................... .462 Maintenance ......................... .654 Shifting ............................. .460 T ransmitter Battery Service (Remote Keyless Entry) . .27 T ransmitter , Garage Door Opener (HomeLink 威 ) . . . .270 T ransmitter Programming (Remote Keyless Entry) . . .24 T ransmitter , Remote Keyless E[...]