Jeep Grand Cherokee SRT8 (2008) manuale d’uso

T ABLE OF CONTENTS SECTION P AGE 1 INTRODUCTION .............................................................3 2 THINGS TO KNOW BEFORE ST AR TING YOUR VEHICLE ............................... 9 3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE ............................... 6 9 4 UNDERST ANDING YOUR INSTRUMENT P ANEL ..................................[...]

[...]

INTRODUCTION CONTENTS m Introduction ........................... 4 m Rollover W arning ........................ 4 m How T o Use This Manual .................. 5 m W arnings And Cautions ................... 7 m V ehicle Identification Number ............... 7 m V ehicle Modifications/Alterations ............ 8 1[...]

INTRODUCTION This manual has been prepar ed with the assistance of service and engineering specialists to acquaint you with the operation and maintenance of your new vehicle. It is supplemented by a W arranty Information Booklet and various customer oriented documents. Y ou are urged to read these publications car efully . Following the instruc- ti[...]

Failure to use driver and passenger seat belts provided is a major cause of severe or fatal injury . In fact, the U.S. government notes that the universal use of existing seat belts could cut the highway death toll by 10,000 or more each year , and could reduce disabling injuries by 2 million annually . In a rollover crash, an unbelted person is si[...]

6 INTRODUCTION[...]

W ARNINGS AND CAUTIONS This manual contains W ARNINGS against operating procedur es, which could result in an accident or bodily injury . It also contains CAUTIONS against procedures, which could result in damage to your vehicle. If you do not read this entir e manual, you may miss important information. Observe all W arnings and Cautions. VEHICLE [...]

VEHICLE MODIFICA TIONS/AL TERA TIONS W ARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to an accident resulting in serious injury or death. 8 INTRODUCTION[...]

THINGS T O KNOW BEFORE ST ARTING YOUR VEHICLE CONTENTS m A W ord About Y our Keys .................. 1 2 ▫ W ireless Ignition Node (WIN) ............. 1 2 ▫ FOB W ith Integrated Key (FOBIK) .......... 1 3 ▫ Ignition Key Removal ................... 1 4 ▫ Key-In-Ignition Reminder ................ 1 5 m Sentry Key ............................ [...]

▫ Programming Additional T ransmitters ........ 2 3 ▫ T ransmitter Battery Service ............... 2 3 ▫ General Information .................... 2 4 m Remote Starting System — If Equipped ........ 2 4 m Door Locks ............................ 2 6 ▫ Manual Door Locks ..................... 2 6 ▫ Power Door Locks ..................... 2 7[...]

m Engine Break-In Recommendations ........... 6 6 m Safety T ips ............................ 6 6 ▫ Exhaust Gas .......................... 6 6 ▫ Safety Checks Y ou Should Make Inside The V ehicle .............................. 6 7 ▫ Safety Checks Y ou Should Make Outside The V ehicle .............................. 6 8 THINGS TO KNOW BEFORE ST[...]

A WORD ABOUT YOUR KEYS Y our vehicle uses a keyless ignition system. This system consists of a Fob with Integrated Key and a W ireless Ignition Node (WIN) with integral ignition switch. Y ou can insert the double-sided integrated key into the igni- tion switch with either side up. Wireless Ignition Node (WIN) The W ireless Ignition Node (WIN) opera[...]

Fob with Integrated Key (FOBIK) The Fob with Integrated Key operates the ignition switch. It also contains the Remote Keyless Entry (RKE) trans- mitter and a valet key , which stores in the rear of the Fob. The valet key allows for entry into the vehicle should the battery in the vehicle or the Fob go dead. Y ou can keep the valet key with you when[...]

Ignition Key Removal Place the selector lever in “P” (Park). T urn the key to the LOCK position, and remove the key . NOTE: • If you try to remove the key befor e you place the selector lever in “P” (Park), it may become trapped temporarily in the ignition switch. If this occurs, rotate the key to the right slightly , then remove the key [...]

CAUTION! An unlocked car is an invitation to thieves. Always remove key from the ignition and lock all doors when leaving the vehicle unattended. Key-In-Ignition Reminder If you open the driver’s door and the key is in the ignition, a chime will sound to remind you to r emove the key . NOTE: The Key-In-Ignition reminder only sounds when the ignit[...]

flash after the bulb check, it indicates that someone used an invalid Fob to start the engine. Either of these condi- tions will result in the engine being shut of f after two (2) seconds. If the V ehicle Security Alarm Indicator Light turns on during normal vehicle operation (vehicle running for longer than 10 seconds), it indicates that there is [...]

location. This number is requir ed for dealer replacement of Fobs. Duplication of Fobs may be performed at an authorized dealer or by using the Customer Key Pro- gramming procedur e. This procedur e consists of pro- gramming a blank Fob to the vehicle electronics. A blank Fob is one, which has never been programmed. NOTE: When having the Sentry Key[...]

NOTE: If a programmed key is lost, see your dealer to have all remaining keys erased fr om the systems memory . This will prevent the lost key from starting your vehicle. The remaining keys must then be r epro- grammed. All vehicle keys must be taken to the dealer at the time of service to be repr ogrammed. General Information The Sentry Key system[...]

the door lock plunger located on the inside of the doors or with the driver’s door key lock cylinder , will not set the alarm. T o Disarm the System T o disarm the system, use the remote keyless entry transmitter . If something has triggered the system in your absence, the horn will sound three times when you unlock the doors. Check the vehicle f[...]

NOTE: Inserting the Fob with Integrated Key into the ignition switch disables all buttons on that transmitter; however , the buttons on the remaining transmitters will continue to work. Shifting the vehicle out of “P” (Park) disables all transmitter buttons for all Fobs. T o Unlock the Doors Press and r elease the “Unlock” button on the tra[...]

Flash Lights with Remote Key Lock This feature will cause the turn signal lights to flash when the doors are locked or unlocked with the transmitter . This feature can be turned on or of f. T o change the current setting, pr oceed as follows: • For vehicles equipped with the Electronic V ehicle Information Center (EVIC), refer to “Flash Lights [...]

Remote Key Lock,” under “Personal Settings (Cus- tomer Programmable Featur es),” under “Electronic V ehicle Information Center (EVIC)” in Section 4 of this manual for details. T o Release the Liftgate Flipper Glass Press the “Flipper Glass/T runk Release” button on the transmitter two times to release the flipper glass. W ARNING! Driv[...]

• Y ou may need to be less than 23 feet (7 meters) from the vehicle when using the transmitter to turn off the panic alarm due to the radio frequency noises emitted by the system. Programming Additional T ransmitters Refer to SENTR Y KEY “Customer Key (Fob) Program- ming.” If you do not have a programmed transmitter , contact your dealer for [...]

2. Remove and replace the batteries. A void touching the new batteries with your fingers. Skin oils may cause battery deterioration. If you touch a battery , clean it with rubbing alcohol. 3. Reposition the access door panel over the battery opening and snap into place. General Information This device complies with part 15 of the FCC rules and RSS [...]

T o remote start your vehicle, press the “Remote Start” button on the key fob twice within three seconds. T o indicate that the vehicle is about to start, the parking lights will flash and the horn will sound briefly (if programmed). T o turn the horn on or off, refer to “Electronic V ehicle Information Center/Customer Pro- grammable Features[...]

Remote start will also cancel if any of the following occur: • If the engine stalls or RPM exceeds 2500 • Any engine warning lamps come on • The hood is opened • The hazard switch is pr essed • The transmission is moved out of P (Park). • The brake pedal is pressed. The vehicle can be started remotely up to a maximum of two times. The v[...]

Power Door Locks The power door lock switch is located on each front door panel. Press the switch to lock or unlock the doors. If the plunger is down when the door is closed, the door will lock. Therefor e, make sure the keys ar e not inside the vehicle before closing the door . If you press the door lock switch while the keys ar e in the ignition [...]

N (Neutral). Refer to “Electronic V ehicle Information Center (EVIC) — Customer Programmable Featur es” in Section 4 of this manual or see your authorized dealer . Child Protection Door Lock The rear doors of your vehicle ar e equipped with child protection locks. If you push up on the lever on the open edge of the door it cannot be opened fr[...]

WINDOWS Power Windows The power window controls ar e located on the driver’s door trim panel. There is a single switch on the fr ont passenger door/rear doors which operates the fr ont passenger/rear passenger door windows. The window controls will operate only when the ignition switch is in the ON or ACC position. The power window switches remai[...]

the first detent, release, and the window will go down automatically . T o cancel the “Auto Down” movement, operate the switch in either the up or down direction and release the switch. T o stop the window from going all the way down during the auto-down operation, pull up on the switch briefly . T o open the window part way , press to the firs[...]

Resetting the Auto-Up Feature Should the Auto-Up feature stop working the window probably needs to be r eset. T o reset Auto-Up: Pull the window switch up and close the window com- pletely , then pull and hold the switch for 1 second. W indow Lockout Switch The window lockout switch on the driver’s door allows you to disable the window control on[...]

open or partially open positions. This is a normal occur- rence and can be minimized. If the buf feting occurs with the sunroof open, adjust the sunr oof opening to minimize the buffeting. LIFTGA TE T o open the liftgate, pull up (squeeze) on the handle and lift. Manually unlocking the vehicle doors with the plunger or a key in the lock cylinder wi[...]

W ARNING! Driving with the liftgate open can allow poisonous exhaust gases into your vehicle. Y ou and your pas- sengers could be injured by these fumes. Keep the liftgate closed when you are operating the vehicle. Liftgate Flipper Glass The liftgate flipper glass is also unlocked when the liftgate is unlocked. T o open the flipper glass, push up o[...]

Once the liftgate flipper glass has been opened, connec- tion to the rear window wiper is interr upted, preventing activation of the rear wiper blade while the flipper glass is open. NOTE: If a power malfunction to the power liftgate latch should occur , an emergency liftgate latch r elease can be used to open the liftgate. The emergency liftgate l[...]

NOTE: The front airbags have a multi stage inflator design. This allows the airbag to have differ ent rates of inflation that are based on collision severity . Please pay close attention to the information in this section. It tells you how to use your restraint system properly to keep you and your passengers as safe as possible. W ARNING! In a coll[...]

Lap/Shoulder Belts All seating positions in your vehicle have combination lap/shoulder belts. The belt webbing retractor is de- signed to lock during very sudden stops or collisions. This feature allows the shoulder part of the belt to move freely with you under normal conditions. But in a colli- sion, the belt will lock and reduce the risk of you [...]

Lap/Shoulder Belt Operating Instructions 1. Enter the vehicle and close the door . Sit back and adjust the seat. 2. The seat belt latch plate is above the back of your seat. Grasp the latch plate and pull out the belt. Slide the latch plate up the webbing as far as necessary to make the belt go around your lap. Latch Plate THINGS TO KNOW BEFORE ST [...]

3. When the belt is long enough to fit, insert the latch plate into the buckle until you hear a “click.” W ARNING! A belt that is buckled into the wrong buckle will not protect you properly . The lap portion could ride too high on your body , possibly causing internal injuries. Always buckle your belt into the buckle nearest you. A belt that is[...]

4. Position the lap belt across your thighs, below your abdomen. T o remove slack in the lap portion, pull up a bit on the shoulder belt. T o loosen the lap belt if it is too tight, tilt the latch plate and pull on the lap belt. A snug belt reduces the risk of sliding under the belt in a collision. W ARNING! A lap belt worn too high can increase th[...]

6. T o release the belt, push the r ed button marked PRESS on the buckle. The belt will automatically retract to its stowed position. If necessary , slide the latch plate down the webbing to allow it to retract fully . W ARNING! A frayed or torn belt could rip apart in a collision and leave you with no protection. Inspect the belt system periodical[...]

As a guide, if you are shorter than average, you will prefer a lower position, and if you ar e taller than average, you’ll prefer a higher position. When you r elease the anchorage, try to move it up or down to make sure that it is locked in position. Automatic Locking Mode — If Equipped In this mode, the shoulder belt is automatically pre- loc[...]

W ARNING! • The belt and retractor assembly must be replaced if the seat belt assembly “automatic locking retrac- tor” feature or any other seat belt function is not working properly when checked according to the procedures in the Service Manual. • Failure to replace the belt and retractor assembly could increase the risk of injury in colli[...]

seconds or until the driver’s seat belt is buckled. The Enhanced W arning System (BeltAlert) will be reactivated if the driver’s seat belt is unbuckled for more than 10 seconds and the vehicle speed is greater than 5 mph (8 km/h). The Enhanced W arning System (BeltAlert) can be en- abled or disabled by your authorized dealer or by following the[...]

Seat Belts and Pregnant Women W e recommend that pregnant women use the seat belts throughout their pr egnancy . Keeping the mother safe is the best way to keep the baby safe. Pregnant women should wear the lap part of the belt across the thighs and as snug acr oss the hips as possible. Keep the belt low so that it does not come across the abdomen.[...]

Driver And Front Passenger Supplemental Restraint Systems (SRS) This vehicle has airbags for both the driver and right front passenger as a supplement to the seat belt r estraint systems. The driver’s front airbag is mounted in the steering wheel. The passenger side airbag is mounted in the instrument panel, above the glove compartment. The words[...]

This vehicle is equipped with window bags to protect the driver , front, and r ear passengers sitting next to a win- dow . They are located above the side windows. Their covers are also labeled SRS/AIRBAG. NOTE: Airbag covers may not be obvious in the interior trim; but they will open to allow airbag deployment. W ARNING! • Do not put anything on[...]

NOTE: Do not use a clothing bar mounted to the coat hooks in this vehicle. A clothing bar will impede the proper performance of the window bags. The front airbags have a multi stage inflator design. This allows the airbag to have differ ent rates of inflation that are based on collision severity . Along with the seat belts, front airbags work with [...]

seat as far back as possible, and use the proper child restraint. See “Child Restraint” in this section. Y ou should read the instructions pr ovided with your child restraint to make sur e that you are using it pr operly . 2. All occupants should use their lap and shoulder belts properly . 3. The driver and front passenger seats should be moved[...]

Airbag System Components The airbag system consists of the following: • Occupant Restraint Control Module • Airbag W arning Light • Driver Airbag • Passenger Airbag • Side Curtain Airbags above Side W indows • Side Remote Acceleration Sensors • Steering Wheel and Column • Instrument Panel • Interconnecting W iring • Knee Impact [...]

Also, the ORC turns on the “Airbag W arning Light” for 6 to 8 seconds for a self-check when the ignition is first turned on. After the self-check, the “Airbag W arning Light” will turn off. If the ORC detects a malfunction in any part of the system, it turns on the “Airbag W arning Light” either momentarily or continuously . A single ch[...]

• The Side Impact SRS Side Curtain Airbags are de- signed to activate only in certain side or rollover collisions. When the ORC (with side impact option) detects a collision requiring the side curtain airbag to inflate, it signals the inflators on the crash side of the vehicle. A quantity of nontoxic gas is generated to inflate the side curtain a[...]

They are not permanent and normally heal quickly . However , if you haven’t healed significantly within a few days, or if you have any blistering, see your doctor immediately . • As the airbags deflate you may see some smoke-like particles. The particles are a normal by-pr oduct of the process that generates the nontoxic gas used for airbag inf[...]

Maintaining Y our Airbag System W ARNING! • Modifications to any part of the airbag system could cause it to fail when you need it. Y ou could be injured if the airbag system is not there to protect you. Do not modify the components or wiring, including adding any kind of badges or stickers to the steering wheel hub trim cover or the upper right [...]

Event Data Recorder (EDR) In the event of an accident, your vehicle is designed to recor d up to 5-seconds of specific vehicle data parameters (see the following list) in an event data recor der prior to the moment of airbag deployment, or near deployment, and up to a quarter second of high-speed deceleration data during and/or after air bag deploy[...]

provided to the custodial entity upon r equest. General data that does not identify particular vehicles or crashes may be released for incorporation in aggr egate crash databases, such as those maintained by the US govern- ment and various states. Data of a potentially sensitive nature, such as would identify a particular driver , ve- hicle, or cra[...]

• Cruise contr ol status • T raction/stability control status • T ire pressur e monitoring system status Child Restraint Everyone in your vehicle needs to be buckled up all the time — babies and children, too. Every state in the United States and all Canadian provinces r equire that small children ride in pr oper restraint systems. This is [...]

Infants and Child Restraints • Safety experts recommend that childr en ride rearwar d-facing in the vehicle until they are at least one year old and weigh at least 20 lbs (9 kg). T wo types of child restraints can be used r earward-facing: infant carriers and “convertible” child seats. • The infant carrier is only used rearwar d-facing in t[...]

Here ar e some tips for getting the most out of your child restraint: • Before buying any r estraint system, make sure that it has a label certifying that it meets all applicable Safety Standards. The manufactur er also recommends that you try a child restraint in the vehicle seats wher e you will use it before you buy it. • The restraint must [...]

buckle or latch plate is too close to the belt path opening on the restraint. Disconnect the latch plate from the buckle and twist the short buckle-end belt several times to shorten it. Insert the latch plate into the buckle with the release button facing out. • If the belt still cannot be tightened, or if pulling and pushing on the restraint loo[...]

belt-positioning booster seat. The child and belt- positioning booster seat are held in the vehicle by the lap/shoulder belt. Children T oo Large for Booster Seats Children who ar e large enough to wear the shoulder belt comfortably , and whose legs are long enough to bend over the front of the seat when their back is against the seat back, should [...]

kits or retr o-fit kits. Y ou are urged to take advantage of all the available attachments provided with your child r e- straint in any vehicle. NOTE: When using the LA TCH attaching system to install a child restraint, please ensur e that all seat belts not being used for occupant restraints ar e stowed and out of reach of childr en. Remind all ch[...]

install the child restraint. Y ou will easily feel them if you run your finger along the intersection of the seatback and seat cushion surfaces. In addition, there ar e tether strap anchorages behind each rear seating position located on the back of the seat. Many , but not all restraint systems will be equipped with separate straps on each side, w[...]

hook for attachment to the tether strap anchorage and a means of adjusting the tension of the strap. Y ou will first loosen the adjusters on the lower straps and on the tether strap so that you can more easily attach the hooks or connectors to the vehicle anchorages. Next attach the lower hooks or connectors over the top of the anchorage bars, push[...]

however , any seat belt system will loosen with time, so check the belt occasionally and pull it tight if necessary . For seat belts having an automatic locking retractor , pull the belt from the r etractor until there is enough to allow you to pass through the child r estraint and slide the latch plate into the buckle. Then, pull the belt until it[...]

W ARNING! An incorrectly anchored tether strap could lead to increased head motion and possible injury to the child. Use only the anchor positions directly behind the child seat to secure a child restraint top tether strap. T ransporting Pets Airbags deploying in the front seat could harm your pet. An unrestrained pet will be thr own about and poss[...]

ENGINE BREAK-IN RECOMMENDA TIONS A long break-in period is not r equired for the engine in your new vehicle. Drive moderately during the first 300 miles (500 km). After the initial 60 miles (100 km), speeds up to 50 or 55 mph (80 or 90 km/h) are desirable. While cruising, brief full-thr ottle acceleration, within the limits of local traffic laws, c[...]

• Do not inhale exhaust gases. They contain carbon monoxide, a colorless and odorless gas which can kill. Never run the engine in a closed ar ea, such as a garage, and never sit in a parked vehicle with the engine running for a extended period. If the vehicle is stopped in an open area with engine r unning for more than a short period, adjust the[...]

Defrosters Check operation by selecting the defrost mode and place the blower control on high speed. Y ou should be able to feel the air directed against the windshield. See your authorized dealer for service if your defroster is inoper - able. Safety Checks Y ou Should Make Outside The V ehicle T ires Examine tires for excessive tr ead wear or une[...]

UNDERST ANDING THE FEA TURES OF YOUR VEHICLE CONTENTS m Mirrors ............................... 7 4 ▫ Automatic Dimming Mirror ............... 7 4 ▫ Outside Mirrors ....................... 7 5 ▫ Exterior Mirrors Folding Featur e ........... 7 5 ▫ Driver’s And Front Passenger Outside Automatic Dimming Mirror — If Equipped .... 7 6 ▫ Po[...]

▫ Front Manual Seat Adjustment ............ 1 0 4 ▫ Front Seat Adjustment — Recline .......... 1 0 4 ▫ Manual Lumbar Support Adjustment ....... 1 0 6 ▫ 8 - W ay Driver’s Power Seat .............. 1 0 6 ▫ 4 - W ay Passenger’s Power Seat — If Equipped ......................... 1 0 7 ▫ Head Restraints ...................... 1 0 7 ?[...]

▫ Automatic Headlight Leveling — HID Headlights Only ...................... 1 2 3 ▫ Lights-On Reminder ................... 1 2 3 ▫ Fog Lights — If Equipped ............... 1 2 3 ▫ T urn Signals ......................... 1 2 4 ▫ High Beam Switch .................... 1 2 4 ▫ Passing Light ........................ 1 2 4 ▫ Headlight T[...]

▫ TCS (T raction Control System) ............ 1 3 5 ▫ BAS (Brake Assist System) ............... 1 3 6 ▫ ERM (Electronic Roll Mitigation) .......... 1 3 7 ▫ ESP (Electr onic Stability Program) ......... 1 3 8 ▫ TSC (T railer Sway Control) .............. 1 4 0 ▫ ESP/BAS W arning Lamp And ESP/TCS Indicator Light ....................... 1 4[...]

▫ General Information ................... 1 5 4 m Power Sunroof — If Equipped ............. 1 5 5 ▫ Opening Sunroof - Expr ess .............. 1 5 6 ▫ Closing Sunroof - Expr ess ............... 1 5 6 ▫ Pinch Protect Featur e ................... 1 5 6 ▫ Pinch Protect Override ................. 1 5 6 ▫ V enting Sunroof - Express ........[...]

MIRRORS Automatic Dimming Mirror This mirror automatically adjusts for annoying headlight glare fr om vehicles behind you. Y ou can turn the feature on or off by pr essing the button at the base of the mirror . A light next to the button will indicate when the dimming feature is activated. Automatic Dimming Mirror 74 UNDERST ANDING THE FEA TURES OF[...]

CAUTION! T o avoid damage to the mirror during cleaning, never spray any cleaning solution directly onto the mirror . Apply the solution onto a clean cloth and wipe the mirror clean. Outside Mirrors T o receive maximum benefit, adjust the outside mirrors to center on the adjacent lane of traffic with a slight overlap of the view obtained on the ins[...]

Driver’s and Front Passenger Outside Automatic Dimming Mirror — If Equipped If your vehicle is equipped with a outside automatic dimming mirrors, they will operate when the inside automatic dimming mirror is on. The outside mirr ors operate off the inside mirr or switch and will automati- cally adjust for annoying headlight glare when the insid[...]

Heated Remote Control Mirrors — If Equipped These mirrors ar e heated to melt frost or ice. This feature is activated whenever you turn on the r ear window defrost. Lighted V anity Mirrors — If Equipped T o access a lighted vanity mirror , flip down one of the visors. Lift the cover to reveal the mirr or . The light will turn on automatically .[...]

UConnect t is a voice-activated, hands-free, in- vehicle communications system. UConnect t allows you to dial a phone number with your cellular phone using simple voice commands (e.g., 9 Call” { “Mike” { ”W ork 9 or 9 Dial” { “248-555-1212 9 ). Y our cellular phone’s audio is trans- mitted through your vehicle’s audio system; the sy[...]

Only one linked (or paired) cellular phone can be used with the system at a time. The system is available in English, Spanish, or French languages (as equipped). Phone Button The rearview mirr or contains the microphone for the system (depending on the type of mirror and radio equipped), and either the radio or the mirror has the two contr ol butto[...]

Operation V oice commands can be used to operate the UConnect t system and to navigate through the UConnect t menu structur e. V oice commands are r equired after most UConnect t system prompts. Y ou will be prompted for a specific command and then guided through the available options. • Prior to giving a voice command, one must wait for the beep[...]

Cancel Command At any prompt, after the beep, you can say 9 Cancel 9 and you will be returned to the main menu. However , in a few instances the system will take you back to the previous menu. Pair (Link) UConnect t System to a Cellular Phone T o begin using your UConnect t system, you must pair your compatible Bluetooth™ enabled cellular phone. [...]

use if multiple cellular phones are in the vehicle at the same time. For example, if priority 3 and priority 5 phones are pr esent in the vehicle, the UConnect t system will use the priority 3 cellular phone when you make a call. Y ou can select to use a lower priority cellular phone at any time (refer to 9 Advanced Phone Connectivity 9 ). Dial by [...]

• After the 9 Ready 9 prompt and the following beep, say the name of the person you want to call. For example, you can say 9 John Doe, 9 where John Doe is a pr evi- ously stored name entry in the UConnect t phone book. Refer to 9 Add Names to Y our UConnect t Phone- book, 9 to learn how to store a name in the phone book. • The UConnect t system[...]

The UConnect t system will allow you to enter up to 32 names in the phone book with each name having up to four associated phone numbers and designations. Each language has a separate 32-name phone book accessible only in that language. Phonebook Download UConnect t allows the user to download entries from their phone via Bluetooth. T o use this fe[...]

• Y ou will then be asked for the name of the phone book entry that you wish to edit. • Next, choose the number designation (home, work, mobile, or pager) that you wish to edit. • When prompted, r ecite the new phone number for the phone book entry that you are editing. After you are finished editing an entry in the phone book, you will be gi[...]

• After you enter the name, the UConnect t system will ask you which designation you wish to delete, home, work, mobile, pager , or all. Say the designation you wish to delete. • Note that only the phone book entry in the current language is deleted. Delete All Entries in the UConnect t Phonebook • Press the “Phone” button to begin. • A[...]

Phone Call Features The following features can be accessed thr ough the UConnect t system if the feature(s) ar e available on your cellular service plan. For example, if your cellular service plan provides thr ee-way calling, this feature can be accessed through the UConnect t system. Check with your cellular service provider for the featur es that[...]

Making a Second Call while Current Call in Progress T o make a second call while you are currently in a call, press the ’V oice Recognition’ button and say 9 Dial 9 or 9 Call 9 followed by the phone number or phone book entry you wish to call. The first call will be on hold while the second call is in progr ess. T o go back to the first call, r[...]

Call T ermination T o end a call in progress, momentarily pr ess the “Phone” button. Only the active call(s) will be terminated and if there is a call on hold, it will become the new active call. If the active call is terminated by the far end, a call on hold may not become active automatically . This is cell phone dependent. T o bring the call[...]

UConnect T System Features Language Selection T o change the language that the UConnect t system is using, • Press the “Phone” button to begin. • After the 9 Ready 9 prompt and the following beep, say the name of the language you wish to switch to (English, Espanol, or Francais, if so equipped). • Continue to follow the system prompts to [...]

The UConnect t system does slightly lower your chances of successfully making a phone call as to that for the cell phone directly . Y our phone must be turned on and paired to the UConnect t system to allow use of this vehicle feature in emergency situations when the cell phone has network coverage and stays paired to the UConnect t system. T owing[...]

service or automated customer service. Some services requir e immediate response selection, in some instances, that may be too quick for use of UConnect t system. When calling a number with your UConnect t system that normally requir es you to enter in a touch-tone sequence on your cellular phone keypad, you can push the “V oice Recognition” bu[...]

a { , 9 you could press the “V oice Recognition” button and say 9 Pair a Phone 9 to select that option without having to listen to the rest of the voice pr ompt. T urning Confirmation Prompts On/Off T urning confirmation prompts off will stop the system from confirming your choices (e.g., the UConnect t sys- tem will not repeat a phone number b[...]

may feel that the call did not go through even though the call is in progr ess. Once your call is answered, you will hear the audio. Mute/Un-Mute (Mute Off) When you mute the UConnect t system, you will still be able to hear the conversation coming from the other party , but the other party will not be able to hear you. In order to mute the UConnec[...]

List Paired Cellular Phone Names • Press the “Phone” button to begin. • After the “Ready” prompt and the following beep, say “Setup Phone Pairing.” • When prompted, say 9 List Phones. 9 • The UConnect t system will play the phone names of all paired cellular phones in or der from the highest to the lowest priority . T o “selec[...]

• Y ou can also press the “V oice Recognition” button anytime while the list is being played, and then choose the phone you wish to delete. Things Y ou Should Know About Y our UConnect T System UConnect t T utorial T o hear a brief tutorial of the system features, press the “Phone” button and say “UConnect t T utorial.” V oice T raini[...]

• Always wait for the beep before speaking. • Speak normally , without pausing, just as you would speak to a person sitting approximately eight (8) feet away from you. • Make sure that no one other than you is speaking during a voice recognition period. • Performance is maximized under: • low-to-medium blower setting, • low-to-medium ve[...]

• Even though international dialing for most number combinations is supported, some shortcut dialing number combinations may not be supported. • In a convertible vehicle, system performance may be compromised with the convertible top down. Far End Audio Performance • Audio quality is maximized under: • low-to-medium blower setting, • low-[...]

UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 99 3[...]

100 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE[...]

UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 101 3[...]

V oice Commands Primary Alternate(s) zero one two three four five six seven eight nine star (*) plus (+) pound (#) add location all V oice Commands Primary Alternate(s) call cancel confirmation prompts. continue delete dial download edit emergency English erase all Espanol Francais help home 102 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE[...]

V oice Commands Primary Alternate(s) language list names list phones mobile mute mute off new entry no pager pair a phone phone pairing pairing phonebook phone book previous recor d again redial V oice Commands Primary Alternate(s) return to main menu return or main menu select phone select send set up phone settings or phone set up towing assistan[...]

General Information This device complies with part 15 of the FCC rules and RSS 210 of Industry Canada. Operation is subject to the following conditions: • This device may not cause harmful interference. • This device must accept any interference r eceived, including interference that may cause undesir ed op- eration. SEA TS Front Manual Seat Ad[...]

W ARNING! Do not ride with the seatback reclined so that the seat belt is no longer resting against your chest. In a collision you could slide under the seat belt and be seriously or even fatally injured. Use the recliner only when the vehicle is parked. W ARNING! • It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle[...]

Manual Lumbar Support Adjustment The manual lumbar support adjustment lever is located on the right side of the driver’s seat (all models) and on the left side of the passenger’s seat (if equipped). Moving the lumbar control lever for e and aft increases or de- creases the lumbar support. 8 - W ay Driver’s Power Seat The driver’s power seat[...]

4 - W ay Passenger’s Power Seat — If Equipped The front passenger’s power seat switches ar e located on the outboard side of the passenger seat lower side trim. The bottom switch controls forwar d/rearwar d adjust- ment. The top switch controls the seatback r ecline adjust- ment. NOTE: The 4 - way seat does not have an up/down adjustment. Hea[...]

center of the instrument panel. After turning on the ignition, you can choose from High, Low , or Off heat settings. Amber LEDs on the side of each switch indicate the level of heat in use. T wo LEDs are illuminated for high, one for low , and none for off. Pressing the switch once will select high-level heating. Pressing the switch a second time w[...]

W ARNING! Persons who are unable to feel pain to the skin because of advanced age, chronic illness, diabetes, spinal cord injury , medication, alcohol use, exhaus- tion or other physical condition must exercise care when using the seat heater . It may cause burns even at low temperatures, especially if used for long periods of time. Do not place an[...]

T wo LEDs are illuminated for high, one for low , and none for off. Pr essing the switch once will select high-level heating. Pressing the switch a second time will select low-level heating. Pressing the switch a thir d time will shut the heating elements off. When high-temperature heating is selected, the heaters provide a boosted heat level durin[...]

60/40 Split Rear Seat T o Lower Rear Seat Either side of the rear seat can be lower ed to allow for extended cargo space and still maintain some r ear seating room. NOTE: Be sure that the fr ont seats are fully upright and positioned forward. This will allow the r ear seatback to fold down easily . 1. Pull the release strap (toward the fr ont of th[...]

2. Fold the rear seat completely forward. T o Raise Rear Seat Raise the rear seatback and lock it into place. If interfer - ence from the car go area pr events the seatback from fully locking, you will have difficulty r eturning the seat to its proper position. W ARNING! The cargo area in the rear of the vehicle (with the rear seatbacks in the lock[...]

Storage — Rear Seat Armrest (If Equipped) The rear seat may be equipped with a center storage armrest. Press the latch and lift the top of the armr est to access the storage bin. Rear Seat Armrest Armrest Storage Bin UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 113 3[...]

DRIVER MEMOR Y SEA T — IF EQUIPPED Once programmed, the memory buttons 1 and 2 on the driver’s door panel can be used to recall the driver’s seat, driver’s outside mirror , adjustable brake and accelerator pedals, and radio station preset settings. Y our Remote Key- less Entry transmitters can also be programmed to r ecall the same position[...]

3. Adjust the driver’s seat, recliner , and driver’s side view mirror to the desir ed positions. 4. Adjust the brake and accelerator pedals to the desired positions. 5. T urn on the radio and set the radio station presets (up to 10 AM and 10 FM stations can be set). 6. T urn the ignition switch to the LOCK position and remove the key . 7. Press[...]

Memory Position Recall NOTE: The vehicle must be in P (Park) to r ecall memory positions. If a recall is attempted when the vehicle is not in P (Park), a message will be displayed in the Electr onic V ehicle Information Center (EVIC). T o recall the memory settings for driver one, press memory button number 1 on the driver’s door or the “Unlock[...]

T o disable another transmitter linked to either memory position, repeat steps 1-5 for each transmitter . NOTE: Once programmed, all transmitters linked to memory can be easily enabled or disabled at one time. Refer to Remote Linked to Memory under 9 Electronic V ehicle Information Center (EVIC) — Customer Pro- grammable Features 9 in Section 4 f[...]

Each stored memory setting will have an associated Easy Entry and Easy Exit position. NOTE: The Easy Entry Easy Exit feature is not enabled when the vehicle is delivered fr om the factory . The Easy Entry Easy Exit feature is enabled (or later disabled) through the pr ogrammable features in the Electr onic V ehicle Information Center (EVIC). Refer [...]

W ARNING! If the hood is not fully latched, it could fly up when the vehicle is moving and block your forward vision. Be sure all hood latches are fully latched before driving. LIGHTS Multi-Function Control Lever The multi-function control lever contr ols the operation of the headlights, turn signals, headlight beam selection, instrument panel ligh[...]

Normal operation will resume when the ignition is turned ON or when the headlight switch is turned to another position. Headlights and Parking Lights T urn the end of the multi-function control lever to the first detent for parking light operation. T urn to the second detent for headlight operation. T urn to the third detent for “Auto” headligh[...]

This system performs two functions. W ith the engine running and the multi-function contr ol lever in the A (Auto) position, the headlights will turn on and off based on the surrounding light levels. Headlights On Automatically W ith W ipers If your vehicle is equipped with Automatic Headlights it also has this customer programmable featur e. When [...]

T o Activate 1. Select “Auto Headlamp Low/High Beams? — Low/ High Beam.” Refer to “EVIC — Customer Programmable Features” in Section 4 of this manual. 2. T urn the end of the multi-function control lever to the A (Auto) headlight position. 3. Push the multi-function control lever away from you (toward fr ont of vehicle) to engage the hi[...]

even when the doors and liftgate are open. While in the “Off” position the instr ument panel lighting is at the lowest light level and may not be suitable for night driving. Daytime Running Lights — If Equipped The high beam headlights come on at a low intensity level whenever the engine is running, and the transmis- sion in not in the P (Par[...]

NOTE: Proper aim and adjustments of the fr ont fog lights should be made to prevent excessive glar e for other drivers. T urn Signals Move the multi-function control lever up or down and the arrows on each side of the instr ument cluster will flash to show proper operation of the fr ont and rear turn signal lights. Y ou can signal a lane change by [...]

time. Refer to “EVIC- Customer Programmable Featur es” in Section 4 to turn this feature “On/Of f” or set the time interval. Interior Lights The interior lighting consists of courtesy lights mounted below the instrument panel, an over head console light assembly which contains both driver and passenger reading lights, r eading lights locate[...]

WINDSHIELD WIPERS AND W ASHERS The front and r ear wipers and washers are operated by a switch in the right side control lever . T urn the end of the control lever to select “Lo,” “Hi,” or one of the five speed sensitive intermittent windshield wiper speeds. Refer to “Speed Sensitive Intermittent W iper System” in this section. For info[...]

T o use the washer , pull the lever toward you and hold while spray is desired. If the lever is pulled while in the delay range, the wiper will operate for several seconds after the lever is released, and then r esume the intermit- tent interval previously selected. If the lever is pulled while in the OFF position, the wipers will operate for sever[...]

Rain Sensing Wipers—If Equipped This feature senses moistur e on the windshield and automatically activates the wipers for the driver . The feature is especially useful for r oad splash or overspray from the windshield washers of the vehicle ahead. Rotate the end of the multi-function lever to one of five settings to activate this feature. The se[...]

• Low Ambient T emperature — When the ignition is first turned ON, the rain sensing system will not operate until the wiper switch is moved, vehicle speed is greater than 0 mph (0 km/h), or the outside tem- perature is gr eater than 32°F (0°C). • T ransmission in N (Neutral) Position — When the ignition is ON, and the transmission is in t[...]

W ARNING! Do not adjust the steering wheel while driving. The telescoping adjustment must be locked while driv- ing. Adjusting the steering wheel while driving or driving without the telescoping adjustment locked could cause the driver to lose control of the vehicle. ADJUST ABLE PEDALS — IF EQUIPPED This feature allows both the brake and accelera[...]

• The pedals can be adjusted while driving. • The pedals cannot be adjusted when the vehicle is in R (Reverse) or when the Speed Control is ON. A message will be displayed in the Electronic V ehicle Information Center (EVIC) if the pedals are attempted to be ad- justed when the system is locked out (“Adjustable Pedal Disabled — Cruise Contr[...]

T o Activate Push the ON/OFF button. The CRUISE indicator in the instrument cluster will illuminate. T o turn the system OFF , push the ON/OFF button a second time. The CRUISE indicator will turn off. The system should be turned OFF when not in use. W ARNING! Leaving the Speed Control system on when not in use is dangerous. Y ou could accidentally [...]

T o Resume Speed T o resume a previously set speed, push the “RESUME ACCEL” lever up and release. Resume can be used at any speed above 25 mph (40 km/h). T o V ary The Speed Setting When the speed control is ON, speed can be incr eased by pushing up and holding “RESUME ACCEL”. Release the lever when the desired speed is r eached, and the ne[...]

NOTE: The speed control system maintains speed up and down hills. A slight speed change on moderate hills is normal. On steep hills a greater speed loss or gain may occur so it may be preferable to drive without speed contr ol. ELECTRONIC BRAKE CONTROL SYSTEM Y our vehicle is equipped with an advanced electronic brake control system that includes A[...]

W ARNING! ABS (Anti-Lock Brake System) cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase the traction afforded by prevailing road conditions. ABS cannot prevent accidents, in- cluding those resulting from excessive speed in turns, driving on very slippery surfaces, or hydro- planing. Only a safe, attentive, [...]

BAS (Brake Assist System) The BAS is designed to optimize the vehicle’s braking capability during emergency braking maneuvers. The system detects an emergency braking situation by sens- ing the rate and amount of brake application and then applies optimum pressur e to the brakes. This can help reduce braking distances. The BAS complements the ant[...]

ERM (Electronic Roll Mitigation) This system anticipates the potential for wheel lift by monitoring the driver ’s steering wheel input and the speed of the vehicle. When ERM determines that the rate of change of the steering wheel angle and vehicles speed are suf ficient to potentially cause wheel lift, it then applies the appropriate brake and m[...]

ESP (Electronic Stability Program) This system enhances directional contr ol and stability of the vehicle under various driving conditions. ESP cor - rects for over/under steering of the vehicle by applying the brake of the appropriate wheel to assist in counter - acting the over/under steer condition. Engine power may also be reduced to help the v[...]

W ARNING! ESP (Electronic Stability Program) cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase the traction afforded by prevailing road conditions. ESP cannot prevent accidents, in- cluding those resulting from excessive speed in turns, driving on very slippery surfaces, or hydro- planing. Only a safe, atten[...]

turn ESP on again, momentarily depr ess the 9 ESP OFF” switch. This will restor e the normal “ESP On” mode of operation. NOTE: T o improve the vehicle’s traction when driving with snow chains, or starting off in deep snow , sand, or gravel, it may be desirable to switch to the “ESP Partial Off” mode by pr essing the “ESP OFF” switch[...]

flash, the engine power may be reduced and you may feel the brakes being applied to individual wheels to attempt to stop the trailer from swaying. TSC is disabled when the ESP system is in the Partial Of f mode. W ARNING! If TSC activates while driving, slow the vehicle down, stop at the nearest safe location, and adjust the trailer load to elimina[...]

• The ESP Contr ol System will make buzzing or clicking sounds when it is active. This is normal; the sounds will stop when ESP becomes inactive following the maneuver that caused the ESP activation. REAR P ARK ASSIST SYSTEM— IF EQUIPPED The Rear Park Assist System pr ovides visual and audible indications of the distance between the rear fascia[...]

Rear Park Assist W arning Display The Rear Park Assist W arning Display , located in the headliner near the flipper glass, provides both visual and audible warnings to indicate the distance between the rear fascia and the detected obstacle. When the ignition is changed to the ON position, the warning display will turn ON all of its LEDs for about 1[...]

W ARNING DISPLA Y DIST ANCES DISPLA Y LED OBST ACLE DIST ANCE FROM: LED COLOR AUDIBLE SIGNAL REAR CORNERS REAR CENTER 1st LED 59 in. (150 cm) Y ellow None 2nd LED 51 in. (130 cm) Y ellow None 3rd LED 45 in. (1 15 cm) Y ellow None 4th LED 31.5 in. (80 cm) 39 in. (100 cm) Y ellow None 5th LED 25.5 in. (65 cm) 33.5 in. (85 cm) Y ellow None 6th LED 20 [...]

Enable/Disable the Rear Park Assist System The Rear Park Assist System can be enabled and disabled with a switch located on the upper switch bank of the instrument panel. When the switch is pressed to disable the system, the instrument cluster will display the 9 P ARK ASSIST DIS- ABLED 9 message. Refer to “Electronic V ehicle Informa- tion Center[...]

Cleaning the Rear Park Assist System Clean the Rear Park Assist Sensors with water , car wash soap and a soft cloth. Do not use rough or har d cloths. Do not scratch or poke the sensors. Otherwise, you could damage the sensors. REAR CAMERA — IF EQUIPPED V ehicles with a Navigation radio may be equipped with a rear view camera (located on the r ea[...]

2. Select “ON” at the “Rear Camera” screen. Highlight “DONE” and press ENTER. The r ear camera is now enabled. 3. When the vehicle is shifted into R (Reverse), the CAUTION screen will appear , followed by an image of the rear of the vehicle. 4. When the vehicle is shifted out of R (Reverse), the rear camera mode is exited and the Naviga[...]

Courtesy/Reading Lights At the forward end of the console ar e two courtesy/ reading lights. Press the lens to turn these lights on. Pr ess a second time to turn the lights off. The lights also turn on when a front door or r ear door is opened. The lights will also turn on when the unlock button on the remote keyless entry transmitter is pr essed. [...]

W ARNING! Y our motorized door or gate will open and close while you are training the Universal T ransceiver . Do not train the transceiver if people or pets are in the path of the door or gate. Only use this transceiver with a garage door opener that has a “stop and reverse” feature as required by federal safety stan- dards. This includes most[...]

It is recommended that a new battery be placed in the hand-held transmitter of the device being programmed to HomeLink t for more ef ficient training and accurate transmission of the radio-frequency signal. Y our vehicle should be parked outside of the garage while training. 1. T urn the ignition switch to the ON/RUN position. 2. Place the hand-hel[...]

NOTE: After training a HomeLink t channel, if the garage door does not operate with HomeLink t and the garage door opener was manufactured after 1995, the garage door opener may have rolling code. If so, pr oceed to the heading “Programming A Rolling Code System.” 5. PROGRAMMING A ROLLING CODE SYSTEM At the garage door opener motor (in the gara[...]

7. Return to the vehicle and press the programmed HomeLink t button twice (holding the button for 2 sec- onds each time). If the device is plugged in and activates, programming is complete. If the device does not activate, press the button a thir d time (for 2 seconds) to complete the training. If you are have any pr oblems, or requir e assistance,[...]

Then proceed with Step 4 under “Pr ogramming HomeLink.” earlier in this section. Using HomeLink T T o operate, simply press and release the pr ogrammed HomeLink t button. Activation will now occur for the trained device (i.e. garage door opener , gate operator , security system, entry door lock, home/office lighting, etc. The hand-held transmit[...]

T roubleshooting Tips If you are having tr ouble programming HomeLink t , her e are some of the most common solutions: • Replace the battery in the original transmitter . • Press the Learn Button on the Garage Door Opener to complete the training for Rolling Code. • Did you unplug the device for training, and remember to plug it back in? If y[...]

POWER SUNROOF — IF EQUIPPED The power sunroof switch is located between the sun visors on the overhead console. W ARNING! • Never leave children in a vehicle, with the keys in the ignition switch. Occupants, particularly unat- tended children, can become entrapped by the power sunroof while operating the power sunroof switch. Such entrapment ma[...]

Opening Sunroof - Express Press the switch r earward and r elease, and the sunroof will open automatically from any position. The sunr oof will open fully , then stop automatically . This is called Express Open. During Expr ess Open operation, any movement of the sunroof switch will stop the sunr oof. Closing Sunroof - Express Press the switch forw[...]

Sunshade Operation The sunshade can be opened manually . However , the sunshade will open automatically as the sunroof opens. NOTE: The sunshade cannot be closed if the sunroof is open. Wind Buffeting W ind buffeting can be described as the perception of pressur e on the ears or a helicopter type sound in the ears. Y our vehicle may exhibit wind bu[...]

POWER OUTLETS Front Power Outlet T o the left and right of the convenience tray (lower center of instrument panel) is an outlet for electrically power ed accessories. Pull lightly on the tab of the plastic cover to access the outlet. Rear Power Outlet — If Equipped The rear power outlet (if equipped) is located in the left rear car go area. The r[...]

CAUTION! Electrical Outlet Use W ith Engine Off • Many accessories that can be plugged in draw power from the vehicle’s battery , even when not in use (i.e., cellular phones, etc.). Eventually , if plugged in long enough, the vehicle’s battery will discharge sufficiently to degrade battery life and/or prevent engine starting. • Accessories [...]

Press the power inverter switch (located on the upper switch bank) to turn the power on to the outlet. Press the switch again to turn the power off. NOTE: When the power inverter switch is pressed, there will be a delay of appr oximately 1 second before the inverter status indicator turns ON. The status indicator of the AC power inverter indicates [...]

CUP HOLDERS In the center console there ar e two cup holders for the front seat passengers. NOTE: The cup holder insert is removable, fr om the console, for cleaning. It can be reinstalled with the lar ger cup depression towar ds the passenger seat, but the top surface will not be flush with the console surface. The rear passengers have access to t[...]

CARGO AREA FEA TURES Cargo Light The cargo ar ea light is activated by opening the liftgate, opening any door , or by rotating the dimmer contr ol on the multi-function control lever to the extr eme top posi- tion. If all doors are closed and only the liftgate is open, pushing on the cargo light lens surface will turn of f all interior lamps. Push [...]

Retractable Cargo Area Cover NOTE: The purpose of this cover is for privacy , not to secure loads. It will not pr event cargo fr om shifting or protect passengers fr om loose cargo. T o cover the cargo area: 1. Grasp the cover at the center handle. Pull it over the cargo ar ea. 2. Insert the pins on the ends of the cover into the slots in the pilla[...]

W ARNING! In an accident a cargo cover loose in the vehicle could cause injury . It could fly around in a sudden stop and strike someone in the vehicle. Do not store the cargo cover on the cargo floor or in the passenger compart- ment. Remove the cover from the vehicle when taken from its mounting. Do not store in the vehicle. Cargo Tie-Down Hooks [...]

W ARNING! Cargo tie-down hooks are not safe anchors for a child seat tether strap. In a sudden stop or collision a hook could pull loose and allow the child seat to come loose. A child could be badly injured. Use only the anchors provided for child seat tethers. W ARNING! The weight and position of cargo and passengers can change the vehicle center[...]

W ARNING! T o help protect against personal injury , passengers should not be seated in the rear cargo area. The rear cargo space is intended for load carrying purposes only , not for passengers, who should sit in seats and use seat belts. Cargo Load Floor The panel in the load floor is reversible for added utility . One side is carpeted and the ot[...]

1. Flip up pull loop(s) so they are perpendicular (straight up) to the top surface of the tray . 2. Pull up on loop(s) and twist 90 degrees, so they are parallel to the slotted hole in tray . 3. Lift tray over loop(s), and reposition tray . 4. Pull up on loop(s) and twist 90 degrees, so they are perpendicular (straight up) to the slotted hole in tr[...]

If the liftgate flipper glass is open, connection to the rear window wiper is interrupted pr eventing activation of the rear wiper blade. When the liftgate flipper glass is closed, the rear wiper switch or the ignition switch needs to be turned OFF and ON to restart the r ear wiper . Adding W asher Fluid The fluid reservoir for the windshield washe[...]

UNDERST ANDING YOUR INSTRUMENT P ANEL CONTENTS m Instrument Panel And Controls ............. 1 7 2 m Instrument Cluster ...................... 1 7 3 m Instrument Cluster Description ............. 1 7 4 m Electronic V ehicle Information Center (EVIC) . . . 182 ▫ Electronic V ehicle Information Center (EVIC) Displays ............................ 1 [...]

▫ Operating Instructions - Radio Mode ....... 1 9 7 ▫ Operation Instructions - (Disc Mode For CD And MP3/WMA Audio Play , DVD-V ideo) .... 2 0 5 ▫ Notes On Playing MP3/WMA Files ........ 2 0 7 ▫ List Button (Disc Mode For MP3/WMA Play) .............................. 2 1 0 ▫ Info Button (Disc Mode For MP3/WMA Play) ........................[...]

▫ Electronic Serial Number/Sirius Identification Number (ENS/SID) .................... 2 2 2 ▫ Selecting Satellite Mode ................. 2 2 2 ▫ Satellite Antenna ...................... 2 2 2 ▫ Reception Quality ..................... 2 2 3 ▫ Operating Instructions - Satellite Mode ...... 2 2 3 ▫ Operating Instructions - Hands Fr ee Pho[...]

INSTRUMENT P ANEL AND CONTROLS 1 — Air Outlet 5 — Upper Switch Bank 9 — Lower Switch Bank 2 — Instrument Cluster 6 — Power Outlet/Cigar Lighter 10 — Climate Controls 3 — Radio 7 — Storage Bin 1 1 — Ignition Switch 4 — Glove Box 8 — Power Outlet 12 — Storage Bin 172 UNDERST ANDING YOUR INSTRUMENT P ANEL[...]

INSTRUMENT CLUSTER UNDERST ANDING YOUR INSTRUMENT P ANEL 173 4[...]

INSTRUMENT CLUSTER DESCRIPTION 1. Speedometer Indicates vehicle speed. 2. Brake W arning Light The BRAKE warning light will come on when the ignition is first turned on, and stay on briefly as a bulb check. If the bulb does not come on during starting, have the bulb re- paired pr omptly . If the light stays on longer , it may be an indication that [...]

before engine start. If the bulb does not come on when turning the key from OFF to ON, have the condition checked promptly . Certain conditions such as a loose or missing gas cap, poor fuel quality , etc. may illuminate the light after engine start. The vehicle should be serviced if the light stays on through several of your typical driving cycles.[...]

8. T achometer The red segments indicate the maximum permissible engine revolutions-per -minute (r .p.m. x 1000) for each gear range. Before r eaching the red ar ea, ease up on the accelerator . 9. Security Alarm System Indicator Light — If Equipped This light will flash rapidly for approximately 15 seconds when the vehicle theft alarm is arming.[...]

12. T ire Pressur e Monitoring T elltale Light Each tire, including the spar e (if provided), should be checked monthly when cold and inflated to the inflation pressur e recommended by the vehicle manufacturer on the vehicle placard or tir e inflation pressur e label. (If your vehicle has tires of a dif ferent size than the size indicated on the ve[...]

of reasons, including the installation of r eplacement or alternate tires or wheels on the vehicle that pr event the TPMS from functioning pr operly . Always check the TPMS malfunction telltale after replacing one or mor e tires or wheels on your vehicle to ensur e that the replace- ment or alternate tires and wheels allow the TPMS to continue to f[...]

The gauge pointer will likely indicate a higher tempera- ture when driving in hot weather , up mountain grades, or when towing a trailer . It should not be allowed to exceed the upper limits of the normal operating range. CAUTION! Driving with a hot engine cooling system could damage your vehicle. If temperature gauge reads high, pull over and stop[...]

15. Electronic Stability Program (ESP) W arning Light/Brake Assist System (BAS) W arning Light — If Equipped The ESP/BAS warning light in the instrument cluster comes on when the ignition switch is turned to the “ON” position. The light should go out with the engine running. If the ESP/ BAS warning light comes on continuously with the engine [...]

19. T ransmission Range Indicator This display indicator shows the automatic transmission gear selection. 20. Fuel Gauge The pointer shows the level of fuel in the fuel tank when the ignition switch is in the ON position. 21. Electronic Throttle Contr ol (ETC) W arning Light This light informs you of a problem with the Electronic Thr ottle Control [...]

W arning Light may turn on and off again, especially during and after hard braking, accelerations, or turns. This occurs due to the shifting of the fuel in the tank. Also, a single chime will sound. ELECTRONIC VEHICLE INFORMA TION CENTER (EVIC) The Electronic V ehicle Information Center (EVIC) fea- tures a driver -interactive display . It is locate[...]

The system allows the driver to select information by pressing the following buttons mounted on the steering wheel: MENU Button Press and r elease the MENU button and the mode displayed will change between T rip Functions, Personal Settings, and System Sta- tus. FUNCTION SELECT Button Press the FUNCTION SELECT button to select the displayed functio[...]

• PROGRAMMING ACTIVE — NEW KEY PRO- GRAMMED • SER VICE SECURITY KEY • INV ALID KEY — TR Y AL TERNA TE KEY • DRIVER/P ASSENGER DOOR OPEN (with graphic) • LEFT/RIGHT REAR DOOR OPEN (with graphic) • X DOORS OPEN (with graphic) • LIFTGA TE OPEN (with graphic) • LIFTGA TE/DOOR OPEN (with graphic) • LIFTGA TE/DOORS OPEN (with graphi[...]

• AUTO HIGH BEAMS ON • AUTO HIGH BEAMS OFF • P ARK ASSIST DISABLED • SER VICE SUSPENSION • SER VICE P ARK ASSIST SYSTEM • TRANSMISSION OVER TEMP • LOW BRAKE FLUID LEVEL • W ARNING! LIMIT SPEED • CHECK GASCAP • ESP OFF • IOD FUSE OUT • MEMOR Y #1 POSITIONS SET • MEMOR Y #2 POSITIONS SET • MEMOR Y SYSTEM DISABLED — SEA T[...]

• LEFT REAR LOW PRESSURE (Premium TPM System Only) • RIGHT REAR LOW PRESSURE (Premium TPM Sys- tem Only) T rip Functions Press and r elease the MENU button until one of the following T rip Functions displays in the EVIC: • Distance T o Empty • T rip A • T rip B • Elapsed T ime • Service Distance • Engine Oil Pressur e • Engine Oil[...]

• When the DTE value is less than 30 miles (48 km) estimated driving distance, the DTE display will change to a text display of 9 LOW FUEL. 9 This display will continue until the vehicle runs out of fuel. Adding a significant amount of fuel to the vehicle will turn off the 9 LOW FUEL 9 text and a new DTE value will display . • T rip A Shows the[...]

Compass Display The compass readings indicate the dir ection the vehicle is facing. Press and r elease the compass button to display one of eight com- pass readings and the outside temperatur e. Automatic Compass Calibration This compass is self-calibrating, which eliminates the need to manually reset the compass. When the vehicle is new , the comp[...]

Compass V ariance Compass V ariance is the difference between magnetic North and Geographic North. In some areas of the country , the difference between magnetic and geographic North is great enough to cause the compass to give false readings. For the most accurate compass performance, the compass variance must be set using the following procedur e[...]

1. T urn the ignition switch ON. 2. Press and hold the compass button for approximately 2 seconds. 3. Press the SCROLL button until “Compass V ariance” message and the last variance zone number displays in the EVIC. 4. Press and release FUNCTION SELECT button until the proper variance zone is selected accor ding to the map. 5. Press and release[...]

Auto Door Locks When Y (YES) is selected, all of the doors will lock automatically when the vehicle reaches a speed of 15 mph (24 km/h). T o make your selection, press and release the FUNCTION SELECT button until “Y (YES)” or “N (NO)” appears. Auto Unlock On Exit When Y (YES) is selected, all of the doors will unlock when the vehicle is sto[...]

selected. T o make your selection, press and release the FUNCTION SELECT button until “Y (YES)” or “N (NO)” appears. Headlamp Off Delay When this feature is selected, the driver can choose to have the headlights remain on for 0, 30, 60, or 90 seconds when exiting the vehicle. T o make your selection, press and release the FUNCTION SELECT bu[...]

(NO)” appears. When N (NO) is selected, the system reverts to the standar d intermittent wiper operation. Service Interval When this feature is selected a service interval between 2,000 (3 200 km) and 6,000 miles (10 000 km) in 500 mile (800 km) increments may be selected. Pr essing the STEP button when in this display will select distances betwe[...]

after the ignition switch is turned off. Opening a vehicle door will cancel this feature. T o make your selection, press and r elease the FUNCTION SELECT button until “Off,” “45 sec.,” “5 min.,” or “10 min.” appears. Illuminated Approach When this feature is selected, the headlights will activate and remain on for up to 90 seconds w[...]

NOTE: T ires heat up during normal driving conditions. Heat will cause the tire pr essure to incr ease from 2 to 6 psi (14 to 41 kPa) during normal driving conditions. Refer to “T ire Inflation Pressur es” in Section 5 for additional information. NOTE: Y our system can be set to display pressure units in PSI, kPa, or BAR. RADIO GENERAL INFORMA [...]

T wo T ypes of Signals There ar e two basic types of radio signals... AM or Amplitude Modulation, in which the transmitted sound causes the amplitude, or height, of the radio waves to vary ... and FM or Frequency Modulation, in which the frequency of the wave is varied to carry the sound. Electrical Disturbances Radio waves may pick up electrical d[...]

Operating Instructions - Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio. Power Switch/V olume Control (Rotary) Press the ON/VOL control to turn the radio ON. Pr ess the ON/VOL a second time to turn OFF the radio. Electronic V olume Control The electronic volume contr ol turns continuously (360 degrees) i[...]

SCAN Button (Radio Mode) Pressing the SCAN button causes the tuner to sear ch for the next listenable station, in AM, FM or Satellite (if equipped) frequencies, pausing for 5 seconds at each listenable station before continuing to the next. T o stop the search, pr ess the SCAN button a second time. V oice Recognition Button (UConnect™ Hands Free [...]

3. After adjusting the hours, press the right side TUNE control knob to set the minutes. The minutes will begin to blink. 4. Adjust the minutes using the right side TUNE control knob. Press the TUNE contr ol knob to save time change. 5. T o exit, press any button/knob or wait 5 seconds. The clock can also be set by pressing the SETUP button and sel[...]

Press the r otary TUNE control knob a thir d time and TREBLE will display . T urn the TUNE control knob to the right or left to increase or decr ease the T reble tones. Press the r otary TUNE control knob a fourth time and BALANCE will display . T urn the TUNE control knob to the right or left to adjust the sound level from the right or left side s[...]

Program T ype 16 Digit-Character Display Nostalgia Nostalga Oldies Oldies Personality Persnlty Public Public Rhythm and Blues R & B Religious Music Rel Musc Religious T alk Rel T alk Rock Rock Soft Soft Soft Rock Soft Rck Soft Rhythm and Blues Soft R&B Sports Sports T alk T alk T op 40 T op 40 W eather W eather By pressing the SEEK button w[...]

• DVD Enter - When the disc is in DVD Menu mode, selecting DVD Enter will allow you to play the current highlighted selection. Use the remote contr ol to scroll up and down the menu (If Equipped). • DISC Play/Pause - Y ou can toggle between playing the DVD and pausing the DVD by pushing the SELECT button (If Equipped). • DVD Play Options - Se[...]

• Set Home Clock - Pressing the SELECT button will allow user to set the clock. T urn the TUNE control knob to adjust the hours and then press and turn the TUNE control knob to adjust the minutes. Pr ess the TUNE control knob again to save changes. • Player Defaults - Selecting this item will allow the user to scroll thr ough the following item[...]

Audio DRC — If Equipped Selecting this item will allow the user to limit maximum audio dynamic range - The default is set to 9 High, 9 and under this setting, dialogues will play at 1 1 db higher than if the setting is 9 Normal. 9 Aspect Ratio — If Equipped Selecting this item will allow the user to choose between wide screen, pan scan, and let[...]

window . Each button can be set for SET 1 and SET 2 in both AM and FM. This allows a total of 12 AM, 12 FM, and 12 Satellite (if equipped) stations to be stored into push-button memory . The stations stored in SET 2 memory can be selected by pressing the push-button twice. Every time a preset button is used, a corr esponding button number will disp[...]

NOTE: The ignition switch must be in the ON or ACC position to operate the radio. LOAD Button — Loading Compact Disc(s) Press the LOAD button and the push-button with the corresponding number (1-6) wher e the CD is being loaded. The radio will display PLEASE W AIT and prompt when to INSER T DISC. After the radio displays 9 INSER T DISC, 9 insert [...]

SCAN Button (CD MODE) Press the Scan button to scan thr ough each track on the CD currently playing. TIME Button (CD MODE) Press this button to change the display fr om a large CD playing time display to a small CD playing time display . R W/FF (CD MODE) Press and hold FF (Fast Forwar d) and the CD player will begin to fast forward until FF is r el[...]

The radio uses the following limits for file systems: • Maximum number of directory levels: 8 • Maximum number of files: 255 • Maximum number of folders: 100 • Maximum number of characters in file/folder names: • Level 1: 12 (including a separator 9 . 9 and a 3-character extension) • Level 2: 31 (including a separator 9 . 9 and a 3-char[...]

MPEG Specifi- cation Sampling Fre- quency (kHz) Bit rate (kbps) MPEG-1 Audio Layer 3 48, 44.1, 32 320, 256, 224, 192, 160, 128, 1 12, 96, 80, 64, 56, 48 MPEG-2 Audio Layer 3 24, 22.05, 16 160, 128, 144, 1 12, 96, 80, 64, 56, 48 WMA Specifi- cation Sampling Fre- quency (kHz) Bit Rate (kbps) WMA 44.1 and 48 48, 64, 96, 128, 160, 192 VBR ID3 T ag info[...]

LIST Button (DISC Mode for MP3/WMA Play) Pressing the LIST button will bring up a list of all folders on the disc. Scrolling up or down the list is done by turning the TUNE control knob. Selecting a folder by pressing the TUNE contr ol knob will begin playing the files contained in that folder (or the next folder in sequence if the selection does n[...]

SCAN Button (Auxiliary Mode) No function. EJECT Button (Auxiliary Mode) No function. TIME Button (Auxiliary Mode) Press this button to change the display fr om elapsed playing time to time of day . The time of day will display for 5 seconds. R W/FF (Auxiliary Mode) No function. SET Button (Auxiliary Mode) No function. Operating Instructions - Hands[...]

Macrovision This product incorporates copyright pr otection technol- ogy that is protected by U.S. patents and other intellec- tual property rights. Use of this copyright pr otection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineer[...]

Other special features include dir ect tune, music type selections, easy store pr esets, backup camera display for vehicles equipped with a backup camera, and on some models a dual display screen operation. Refer to your Radio Specific User’s Manual for detailed operating instructions. Operating Instructions — Satellite Radio (If Equipped) Refe[...]

Changing Daylight Savings T ime When selected, this feature will display the time of day in daylight savings time. Proceed as follows to change the current setting: 1. T urn on the system. 2. T ouch the screen wher e the time is displayed. The clock setting menu will appear on the screen. 3. When this feature is on, a check mark will appear in the [...]

want to select, touch the screen wher e the word “Page” is displayed to view additional time zones in the menu. 5. T ouch the screen wher e the word “Save” is displayed. SALES CODE RER — AM/FM/CD/DVD RADIO WITH NA VIGA TION SYSTEM — IF EQUIPPED NOTE: The radio sales code is located on the lower right side of your radio faceplate. Satell[...]

4. Press the HOUR or MIN soft keys on the face of the radio. 5. The time setting will change each time you press the HOUR or MIN soft key . 6. Press the SA VE soft key on the face of the radio. Changing the T ime Zone 1. Press the T ime soft key on the lower left side of the face of the radio. 2. Press the Set T ime Zone soft key on the face of the[...]

UNIVERSAL CONSUMER INTERF ACE (UCI) — IF EQUIPPED NOTE: This section is for sales code RES and REQ radios only with UConnect.™ For sales code REN touch screen radio, r efer to the separate User’s Manual. This feature allows you to plug in an iPod t mobile digital device into the vehicle’s sound system through a connec- tor (UCI connector) u[...]

Play Mode When switched to UCI mode the iPod t will be in Play mode . In this Play mode , you may use the following buttons on the radio faceplate to control the iPod t and display data: TUNE/SCROLL Knob Use the “TUNE/SCROLL” knob to go to the next or previous track. The “TUNE/SCROLL” knob functions similar to the scroll wheel on the iPod t[...]

previous track in the list, if you pr ess this button at any other time in the current track it will go back to the beginning of the track. If the right (up) button is pressed during Play mode, it will go to the next track in the list. INFO Button Press the “INFO” button while a track is playing to see the information (T rack T itle, Artist, Al[...]

List or Browse Mode During Play mode, pressing any of the following buttons will take you to List mode. List mode enables you to scroll thr ough the list of menus and tracks on the iPod t device. TUNE/SCROLL Knob In the List mode, the “TUNE/SCROLL” knob functions in a similar manner as the scroll wheel on the iPod t . T urning the “TUNE/SCROL[...]

After pressing a pr eset button, you will see the list you are in on the top line and the first item in that list on the second line. T o exit the List mode without selecting a track, press the same preset button again to go back to Play mode. LIST Button Pressing the “LIST” button will take to the top level menu of the iPod t . This takes you [...]

www .siriuscanada.ca for Canadian residents. Please have the following information available when calling: 1. The Electronic Serial Number/Sirius Identification Number (ESN/SID). 2. Y our V ehicle Identification Number . Electronic Serial Number/Sirius Identification Number (ENS/SID) The Electronic Serial Number/Sirius Identification Num- ber is ne[...]

Reception Quality Satellite reception may be interr upted due to one of the following reasons: • The vehicle is parked in an undergr ound parking structur e or under a physical obstacle. • Dense tree coverage may interr upt reception in the form of short audio mutes. • Driving under wide bridges or along tall buildings can cause intermittent [...]

3 seconds will make the radio display the Song T itle all of the time (press and hold again to r eturn to normal display). R W/FF Pressing the R W (Rewind) or FF (Fast Forward) buttons causes the tuner to search for the next channel in the direction of the arr ows. TUNE Control (Rotary) T urn the right side rotary control clockwise to incr ease or [...]

Select the button (1-6) you wish to lock onto this channel and press and r elease that button. If a button is not selected within 5 seconds after pressing the SET button, the channel will continue to play but will not be stored into push-button memory . Y ou may add a second channel to each push-button by repeating the above pr ocedure with this ex[...]

The LCD screen is located on the headliner behind the front seats. Lowering the DVD Screen Remote Control Location 226 UNDERST ANDING YOUR INSTRUMENT P ANEL[...]

REMOTE SOUND SYSTEM CONTROLS — IF EQUIPPED The remote sound system contr ols are located on the r ear surface of the steering wheel. Reach behind the wheel to access the switches. The right hand control is a r ocker type switch with a push-button in the center and controls the volume and mode of the sound system. Pressing the top of the r ocker s[...]

Radio Operation Pressing the top of the switch will “Seek” up for the next listenable station and pressing the bottom of the switch will “Seek” down for the next listenable station. The button located in the center of the left hand control CD Player Pressing the top of the switch once will go to the next track on the CD. Pressing the bottom[...]

RADIO OPERA TION AND CELLULAR PHONES Under certain conditions, the cellular phone being On in your vehicle can cause erratic or noisy performance from your radio. This condition may be lessened or eliminated by relocating the cellular phone antenna. This condition is not harmful to the radio. If your radio performance does not satisfactorily “cle[...]

NOTE: The numbers on the temperature dial r epresent a comfort setting when the Mode knob is set to Auto, and not the actual air temperature. Operation of the system is quite simple. Begin by turning the right mode knob to AUTO, and place the blower control (left knob) to either LO AUT O or HI AUTO. The LO AUTO position should be used for front sea[...]

The air conditioning in this system is automatic. Pressing this button while in AUTO mode will cause the LED to flash three times and r emain off. This indicates that the system is in AUT O and requesting the air conditioning is not necessary . The system will automatically control r ecircu- lation. However , pressing this button will tem- porarily[...]

move your mode knob to panel, panel/floor or floor , then hit the Recirc button. This featur e will reduce the possibility of window fogging. Manual Operation This system offers a full complement of manual override features which consist of Blower Pr eferred Automatic, Mode Preferr ed Automatic with Manual Air T emperature Control and Manual. This [...]

UNDERST ANDING YOUR INSTRUMENT P ANEL 233 4[...]

NOTE: Regardless of the type of operation, when a temperature knob is set to the full clockwise or full counterclockwise position, the system will deliver full hot or full cold air out of the ducts, respectively . The operator can override the AUTO mode setting and select the direction of the air by r otating the right mode knob to one of the follo[...]

Air flows through the r egisters in the back of the center console, and under the front seats to the r ear seat passengers. These registers can be closed to block airflow . The center console outlets deliver conditioned air while the floor outlets deliver heated air . • Panel Air flows through the outlets located in the in- strument panel. Air fl[...]

Operating Tips W indow Fogging W indows will fog on the inside when the humidity inside the vehicle is high. This often occurs in mild or cool temperatures when it’s rainy or humid. In most cases turning on the Air-conditioning (pr essing the snowflake button) will clear the fog. Adjust the temperature control, air direction and blower speed to m[...]

Y our air conditioning system is also equipped with an automatic recir culation system. When the system senses a heavy load or high heat conditions, it may use partial Recirculation A/C mode to provide additional comfort. W inter Operation When operating the system during the winter months, make sure the air intake, located dir ectly in front of th[...]

[...]

ST ARTING AND OPERA TING CONTENTS m Starting Procedur es ..................... 2 4 2 ▫ Normal Starting ...................... 2 4 3 ▫ Extremely Cold W eather (Below 2 20°F Or 2 29°C) ............................. 2 4 3 ▫ If Engine Fails T o Start ................. 2 4 4 ▫ After Starting ........................ 2 4 5 m Automatic T ransmis[...]

m T ire Safety Information ................... 2 5 9 ▫ T ire Markings ........................ 2 5 9 ▫ T ire Identification Number (TIN) .......... 2 6 2 ▫ T ire Loading And T ire Pressur e ........... 2 6 3 m T ires — General Information ............... 2 6 7 ▫ Run Flat T ires ........................ 2 6 7 ▫ T ire Pressur e ..........[...]

▫ Carbon Monoxide W arnings .............. 2 8 1 m Adding Fuel .......................... 2 8 2 ▫ Fuel Filler Cap (Gas Cap) ............... 2 8 2 m T railer T owing ......................... 2 8 5 ▫ Common T owing Definitions ............. 2 8 5 ▫ T railer Hitch Classification ............... 2 8 9 ▫ T railer T owing W eights (Maximum T r[...]

ST ARTING PROCEDURES Before starting your vehicle, adjust your seat, adjust the inside and outside mirrors, fasten your seat belt, and if present, instr uct all other occupants to buckle their seat belts. W ARNING! • Never leave children alone in a vehicle. Leaving children in a vehicle unattended is dangerous for a number of reasons. A child or [...]

Normal Starting The gear selector must be in the “N” (Neutral) or “P” (Park) position before you can start the engine. Apply the brakes before shifting into any driving gear . NOTE: Normal starting of either a cold or a warm engine is obtained without pumping or depressing the accelerator pedal. Do not press the accelerator . Use the Fob wi[...]

If Engine Fails to Start W ARNING! • Never pour fuel or other flammable liquids into the throttle body air inlet opening in an attempt to start the vehicle. This could result in a flash fire causing serious personal injury . • Do not attempt to push or tow your vehicle to get it started. V ehicles equipped with an automatic transmission cannot [...]

After Starting The idle speed is controlled automatically and it will decrease as the engine warms up. AUTOMA TIC TRANSMISSION CAUTION! Damage to the transmission may occur if the follow- ing precautions are not observed: • Shift into P (Park) only after the vehicle has come to a complete stop. • Shift into or out of R (Reverse) only after the [...]

W ARNING! It is dangerous to shift the selector lever out of P (Park) or N (Neutral) if the engine speed is higher than idle speed. If your foot is not firmly on the brake pedal, the vehicle could accelerate quickly forward or in reverse. Y ou could lose control of the vehicle and hit someone or something. Only shift into gear when the engine is id[...]

5. Move the shift lever into the N (Neutral) position. 6. The vehicle may then be started in N (Neutral). Have your vehicle inspected by your local authorized dealer , if the shift lock manual override has been used. Brake/T ransmission Interlock System This system prevents you fr om moving the gear shift out of P (Park) and into any gear unless th[...]

W ARNING! It is dangerous to shift the selector lever out of P (Park) or N (Neutral) if the engine speed is higher than idle speed. If your foot is not firmly on the brake pedal, the vehicle could accelerate quickly forward or in reverse. Y ou could lose control of the vehicle and hit someone or something. Only shift into gear when the engine is id[...]

W ARNING! Unintended movement of a vehicle could injure those in and near the vehicle. As with all vehicles, you should never exit a vehicle while the engine is running. Before exiting a vehicle, you should apply the park brake, shift the transmission into P (Park), and remove the key from the ignition. Once the key is removed from the ignition the[...]

NOTE: The Electronic Stability Pr ogram (ESP) and T raction Control (if equipped) should be turned OFF before attempting to r ock the vehicle. Refer to “Electronic Brake Control System” in Section 3 of this manual. The least amount of accelerator pedal pressur e to main- tain the rocking motion without spinning the wheels or racing the engine i[...]

Autostick Operation By placing the shift lever in the D (Drive) position the lever can be moved from side to side. This allows the driver to engage the AutoStick mode. Moving the shift lever to the right (+) or the left (-) will engage the Autostick mode. In normal driving mode (Boxed “D” displayed in the PRNDL), moving the shift lever to the r[...]

When in the Autostick mode, as the engine RPM nears the engine maximum speed, an “UPSHIFT” message will appear in the Electronic V ehicle Information Center (EVIC) portion of your instrument cluster . This message appears in order to alert the driver that the engine speed is approaching it’s maximum value and a upshift to the next gear is req[...]

P ARKING BRAKE T o set the parking brake, pull the lever up as firmly as possible. When the parking brake is applied with the ignition ON, the “Brake W arning Light” in the instru- ment cluster will light. T o release the parking brake, pull up slightly , press the center button, then lower the lever completely . NOTE: The instrument cluster ?[...]

W ARNING! • Always fully apply the parking brake when leav- ing your vehicle, or it may roll and cause damage or injury . Also, be certain to leave the transmis- sion in P (Park). Failure to do so may allow the vehicle to roll and cause damage or injury . • Leaving children in a vehicle unattended is dan- gerous for a number of reasons. A child[...]

W ARNING! Significant over or under inflation of tires can lead to loss of braking effectiveness. The Anti-Lock Brake System conducts a low-speed self- test at about 12 mph (20 km/h). If you have your foot lightly on the brake while this test is occurring you may feel slight pedal movement. The movement can be more apparent on ice and snow . This i[...]

W ARNING! • The Anti-Lock Brake System (ABS) cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase braking or steering efficiency beyond that af forded by the condition of the vehicle brakes and tires or the traction afforded. • The ABS cannot prevent accidents, including those resulting from excessive speed[...]

W ARNING! T o use your brakes and accelerator more safely , follow these tips: • Do not “ride” the brakes by resting your foot on the pedal. This could overheat the brakes and r esult in unpredictable braking action, longer stopping dis- tances, or brake damage. • When descending mountains or hills, repeated brak- ing can cause brake fade w[...]

POWER STEERING The standard power steering system will give you good vehicle response and incr eased ease of maneuverability in tight spaces. The system will provide mechanical steering capability if power assist is lost. If for some reason the power assist is interr upted, it will still be possible to steer your vehicle. Under these condi- tions, [...]

TIRE SAFETY INFORMA TION Tire Markings NOTE: • P (Passenger)-Metric tir e sizing is based on U.S. design standards. P-Metric tir es have the letter “P” molded into the sidewall preceding the size designation. Ex- ample: P215/65R15 95H. • European Metric tir e sizing is based on European design standards. T ires designed to this standar d ha[...]

T ire Sizing Chart EXAMPLE: Size Designation: P = Passenger car tire size based on U.S. design standar ds ( ....blank.... ( = Passenger car tire based on Eur opean design standards LT = Light T ruck tire based on U.S. design standar ds T = T emporary Spare tire 31 = Overall Diameter in Inches (in) 215 = Section W idth in Millimeters (mm) 65 = Aspec[...]

EXAMPLE: Service Description: 95 = Load Index —A numerical code associated with the maximum load a tire can carry . H = Speed Symbol —A symbol indicating the range of speeds at which a tire can carry a load corr esponding to its load index under certain operating conditions. —The maximum speed corresponding to the Speed Symbol should only be [...]

Tire Identification Number (TIN) The TIN may be found on one or both sides of the tire; however , the date code may only be on one side. T ires with white sidewalls will have the full TIN including date code located on the white sidewall side of the tire. Look for the TIN on the outboard side of black sidewall tir es as mounted on the vehicle. If t[...]

Tire Loading and T ire Pressure T ire Placard Location NOTE: The proper cold tir e inflation pressur e is listed on either the face of the driver’s door or the driver’s side “B” pillar . T ire and Loading Information Placard This placard tells you important information about the: 1) number of people that can be carried in the vehicle 2) the[...]

Loading The vehicle maximum load on the tire must not exceed the load carrying capacity of the tire on your vehicle. Y ou will not exceed the tire’s load carrying capacity if you adhere to the loading conditions, tir e size, and cold tire inflation pressur es specified on the “T ire and Loading Information” placard and in the “V ehicle Load[...]

5. Determine the combined weight of luggage and cargo being loaded on the vehicle. That weight may not safely exceed the available cargo and luggage load capacity calculated in Step 4. 6. If your vehicle will be towing a trailer , load from your trailer will be transferred to your vehicle. Consult this manual to determine how this reduces the avail[...]

266 ST ARTING AND OPERA TING[...]

W ARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle. Never overload them. TIRES — GENERAL INFORMA TION Run Flat Tires This vehicle is equipped with run flat tir es. Although the tires ar e des[...]

1. Safety— W ARNING! Improperly inflated tires are dangerous and can cause accidents. • Under inflation increases tire flexing and can result in tire failure. • Over inflation reduces a tire’s ability to cushion shock. Objects on the road and chuck holes can cause damage that results in tire failure. • Unequal tire pressures can cause ste[...]

Tire Inflation Pressures The proper cold tir e inflation pressur e is listed on either the face of the driver’s door , or the driver’s side “B” pillar . The pressur e should be checked and adjusted as well as inspecting for signs of tire wear or visible damage at least once a month. Use a good quality pocket-type gauge to check tire pr essu[...]

Check tire pr essures mor e often if subject to a wide range of outdoor temperatures, as tir e pressur es vary with temperature changes. T ire pressur es change by approximately 1 psi (7 kPa) per 12° F (7° C) of air temperature change. Keep this in mind when checking tire pr essure inside a garage especially in the winter . Example: If garage tem[...]

Radial-Ply Tires W ARNING! Combining radial ply tires with other types of tires on your vehicle will cause your vehicle to handle poorly . The instability could cause an accident. Al- ways use radial tires in sets of four . Never combine them with other types of tires. Cuts and punctures in radial tir es are r epairable only in the tread ar ea beca[...]

T read Wear Indicators T read wear indicators are in the original equipment tir es to help you in determining when your tires should be replaced. These indicators are molded into the bottom of the tr ead grooves and will appear as bands when the tr ead depth becomes 1/16 inch (2 mm). When the indicators appear in 2 or more adjacent gr ooves, the ti[...]

W ARNING! All tires should be replaced after six years, regardless of the remaining tread. Failure to follow this warning can result in sudden tire failure. Y ou could lose control and have an accident resulting in serious injury . Keep unmounted tires in a cool, dry place with as little exposure to light as possible. Pr otect tires fr om contact w[...]

W ARNING! • Do not use a tire, wheel size or rating other than that specified for your vehicle. Some combinations of unapproved tires and wheels may change suspension dimensions and performance characteristics, result- ing in changes to steering, handling, and braking of your vehicle. This can cause unpredictable handling and stress to steering a[...]

Improper alignment will not cause vehicle vibration. V ibration may be a result of tire and wheel out-of- balance. Proper balancing will r educe vibration and avoid tire cupping and spotty wear . TIRE ROT A TION RECOMMENDA TIONS Do not rotate the tir es as the wider rear tir es will not fit on the front of the vehicle. TIRE PRESSURE MONITOR SYSTEM [...]

one or more Low Pr essure messages (Left Fr ont, Left Rear , Right Front, Right Rear) for 3 seconds, and a graphic display of the pressur e value(s) with the low tire(s) flashing. Refer to “Electr onic V ehicle Information Center (EVIC)” in Section 4 of this manual. NOTE: Y our system can be set to display pressure units in PSI, kPa, or BAR. Sh[...]

NOTE: Y our system can be set to display pressure units in PSI, kPa, or BAR. If the ignition key is cycled, this sequence will repeat, providing the system fault still exists. If the system fault no longer exists, the “T ire Pressur e Monitoring T elltale Light” will no longer flash, the 9 CHECK TPM SYSTEM 9 text message will not be present, an[...]

any of the four active road tir es. The vehicle may need to be driven for up to 10 minutes above 15 mph (24 km/h) in order for the TPMS to r eceive this information. General Information This device complies with part 15 of the FCC rules and RSS 210 of Industry Canada. Operation is subject to the following conditions: • This device may not cause h[...]

Over 40 auto manufacturers worldwide have issued and endorsed consistent gasoline specifications (the W orld- wide Fuel Charter , WWFC) which define fuel properties necessary to deliver enhanced emissions, performance, and durability for your vehicle. The manufacturer r ecom- mends the use of gasoline that meets the WWFC speci- fications if they ar[...]

manufacturer . While MTBE is an oxygenate made from Methanol, it does not have the negative effects of Metha- nol. MMT In Gasoline MMT is a manganese containing metallic additive that is blended into some gasoline to increase octane. Gasoline blended with MMT provides no performance advantage beyond gasoline of the same octane number without MMT . [...]

• An out-of-tune engine, or certain fuel or ignition malfunctions, can cause the catalytic converter to overheat. If you notice a pungent burning odor or some light smoke, your engine may be out of tune or malfunctioning and may requir e immediate service. Contact your dealer for service assistance. • The use of fuel additives, which are now be[...]

• Guard against carbon monoxide with pr oper mainte- nance. Have the exhaust system inspected every time the vehicle is raised. Have any abnormal conditions repair ed promptly . Until repair ed, drive with all side windows fully open. • Keep the trunk closed when driving your vehicle to prevent carbon monoxide and other poisonous ex- haust gase[...]

CAUTION! Damage to the fuel system or emission control sys- tem could result from using an improper fuel cap (gas cap). A poorly fitting cap could let impurities into the fuel system. Also, a poorly fitting after- market cap can cause the MIL (Malfunction Indicator Light) to illuminate, due to fuel vapors escaping from the system. CAUTION! A poorly[...]

NOTE: T ighten the gas cap about 1/4 turn until you hear one click. This is an indication that cap is properly tightened. If the gas cap is not tighten properly , the Malfunction Indicator Light will come on. Be sure the gas cap is tightened every time the vehicle is refueled. W ARNING! A fire may result if gasoline is pumped into a portable contai[...]

W ARNING! • Never add fuel when the engine is running. • Never have any smoking materials lit in or near the vehicle when the fuel cap is removed or the tank filled. TRAILER TOWING In this section you will find safety tips and information on limits to the type of towing you can reasonably do with your vehicle. Before towing a trailer car efully[...]

Gross Combination W eight Rating (GCWR) The gross combination weight rating (GCWR) is the total permissible weight of your vehicle and trailer when weighed in combination. (Note that GCWR ratings in- clude a 150 lbs (68 kg) allowance for the presence of a driver). Gross Axle W eight Rating (GA WR) The GA WR is the maximum capacity of the front and [...]

W eight-Carrying Hitch A weight-carrying hitch supports the trailer tongue weight, just as if it were luggage located at a hitch ball or some other connecting point of the vehicle. These kind of hitches are the most popular on the market today and they’re commonly used to tow small- and medium-sized trailers. W eight-Distributing Hitch A weight-d[...]

W eight Distributing Hitch System Improper Adjustment of W eight Distributing System 288 ST ARTING AND OPERA TING[...]

T railer Hitch Classification The following chart provides the industry standar d for the maximum trailer weight a given trailer hitch class can tow and should be used to assist you in selecting the correct trailer hitch for your intended towing condition. Refer to the T railer T owing W eights (Maximum T railer W eight Ratings) chart for the Max. [...]

T railer T owing Weights (Maximum T railer Weight Ratings) The following chart provides the maximum trailer weight ratings towable for your given drivetrain. Engine/ T ransmission GCWR (Gross Combined Wt. Rating) Frontal Area Max. GTW (Gross T railer Wt.) Max. T ongue Wt. (See Note 1) 6.1L Automatic 8,800 lbs (3 992 kg) 40 Sq. Ft. (3.72 square mete[...]

Never exceed the maximum tongue weight stamped on your trailer hitch. Consider the following items when computing the weight on the front/r ear axles of the vehicle: • The tongue weight of the trailer . • The weight of any other type of cargo or equipment put in or on your vehicle. • The weight of the driver and all passengers. NOTE: Remember[...]

CAUTION! • A void towing a trailer for the first 500 miles (805 km) of vehicle operation. Doing so may damage your vehicle. • During the first 500 miles (805 km) of trailer towing, limit your speed to 50 mph (80 km/h). Perform the maintenance listed in Section 8 of this manual. When towing a trailer , never exceed the GA WR, or GCWR, ratings. W[...]

• Safety chains must always be used between your vehicle and trailer . Always connect the chains to the hook retainers of the vehicle hitch. Cr oss the chains under the trailer tongue and allow enough slack for turning corners. • V ehicles with trailers should not be parked on a grade. When parking, apply the parking brake on the tow vehicle. P[...]

− When replacing tir es, refer to “T ires–General Informa- tion” for proper tir e replacement pr ocedures. Replac- ing tires with a higher load carrying capacity will not increase the vehicle’s GVWR and GA WR limits. T owing Requirements — T railer Brakes − Do not interconnect the hydraulic brake system or vacuum system of your vehicl[...]

W ARNING! Do not connect trailer brakes to your vehicle’s hy- draulic brake lines. It can overload your brake sys- tem and cause it to fail. Y ou might not have brakes when you need them and could have an accident. T owing any trailer will increase your stopping dis- tance. When towing you should allow for additional space between your vehicle an[...]

T owing T ips — Electronic Speed Control (If Equipped) − Don’t use in hilly terrain or with heavy loads. − When using the speed control, if you experience speed drops gr eater than 10 mph (16 km/h), disengage until you can get back to cruising speed. − Use speed control in flat terrain and with light loads to maximize fuel efficiency . T [...]

WHA T T O DO IN EMERGENCIES CONTENTS m Hazard W arning Flashers ................. 2 9 8 m If Y our Engine Overheats ................. 2 9 9 m Jump Starting ......................... 3 0 0 6[...]

HAZARD W ARNING FLASHERS Y our vehicle’s hazard warning flasher is an emergency warning system. When you activate it, all front and r ear directional signals will flash intermittently . Use it when your vehicle is disabled on or near the road. It warns other drivers to steer clear of you and your vehicle. This is an emergency warning system, not [...]

IF YOUR ENGINE OVERHEA TS In any of the following situations, you can reduce the potential for overheating by taking the appr opriate ac- tion. • On the highways — Slow down. • In city traffic — While stopped, put transmission in N (Neutral), but do not increase engine idle speed. NOTE: There ar e steps that you can take to slow down an imp[...]

JUMP ST ARTING If the vehicle has a discharged battery , booster cables may be used to obtain a start from a booster battery or the battery in another vehicle. This type of start can be dangerous if done impr operly , so follow this procedure carefully . W ARNING! Battery fluid is a corrosive acid solution; do not allow battery fluid to contact eye[...]

1. Remove all metal jewelry such as watch bands or bracelets which might make an unintended electrical contact. 2. Park the booster vehicle within cable reach but with- out letting the vehicles touch. Set the parking brake on both vehicles, place the transmission in P (Park), and turn the ignition OFF . 3. T urn off the heater , radio, and all unne[...]

W ARNING! Any procedure other than above could result in: 1. Personal injury caused by electrolyte squirting out the battery vent; 2. Personal injury or property damage due to battery explosion; 3. Damage to charging system of booster vehicle or of immobilized vehicle. W ARNING! • Y ou should not try to start your vehicle by pushing or towing. ?[...]

MAINT AINING YOUR VEHICLE CONTENTS m Engine Compartment – 6.1L ............... 3 0 6 m Onboard Diagnostic System — OBD II ........ 3 0 7 ▫ Loose Fuel Filler Cap Message ............ 3 0 8 m Emissions Inspection And Maintenance Programs ............................ 3 0 8 m Replacement Parts ...................... 3 1 0 m Dealer Service .......[...]

▫ Power Steering Fluid Check .............. 3 2 0 ▫ Body Lubrication ..................... 3 2 1 ▫ W indshield W iper Blades ................ 3 2 2 ▫ W indshield W ashers — Front And Rear ..... 3 2 2 ▫ Exhaust System ...................... 3 2 3 ▫ Cooling System ....................... 3 2 4 ▫ Hoses And V acuum/V apor Harnesses ....[...]

▫ Front T urn Signal ..................... 3 4 9 ▫ Front Fog Light ...................... 3 5 0 ▫ Rear T ail, Stop, T urn Signal, And Back-Up Lights ............................. 3 5 0 ▫ Center High Mounted Stop Light (CHMSL) . . . 351 m Fluid Capacities ........................ 3 5 2 m Fluids, Lubricants, And Genuine Parts ........ 3 5 3 ?[...]

ENGINE COMP ARTMENT – 6.1L 306 MAINT AINING YOUR VEHICLE[...]

ONBOARD DIAGNOSTIC SYSTEM — OBD II Y our vehicle is equipped with a sophisticated onboard diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and automatic transmission control systems. When these systems ar e operating properly , your vehicle will provide excellent performance and fuel economy , as wel[...]

Loose Fuel Filler Cap Message After fuel is added, the vehicle diagnostic system can determine if the fuel filler cap is loose, improperly installed, or damaged. A “CHECK GASCAP” message will be displayed in the EVIC (Refer to Section 4 of this manual). T ighten the gas cap until a 9 clicking 9 sound is heard. This is an indication that the gas[...]

For states which have an I/M (Inspection and Maintenance) requir ement, this check verifies the following: the MIL (Malfunction Indicator Lamp) is functioning and is not on when the engine is running, and that the OBD (On Board Diagnostic) system is r eady for testing. Normally , the OBD system will be ready . The OBD system may not be ready if you[...]

b. The MIL will not flash at all and will r emain fully illuminated until you turn off the ignition key or start the engine. This means that your vehicle’s OBD system is ready and you can proceed to the I/M station. If your OBD system is not ready , you should see your authorized dealer or repair facility . If your vehicle was recently serviced o[...]

W ARNING! Y ou can be badly injured working on or around a motor vehicle. Do only that service work for which you have the knowledge and the proper equipment. If you have any doubt about your ability to perform a service job, take your vehicle to a competent mechanic. MAINTENANCE PROCEDURES The pages that follow contain the required maintenance ser[...]

NOTE: Fill engine oil one quart at a time. CAUTION! Overfilling or underfilling will cause oil aeration or loss of oil pressure. This could damage your engine. CAUTION! Operating the engine with the oil levels below the safe zone, or operating with oil levels that exceed the top of the safe zone may cause engine damage. Change Engine Oil Road condi[...]

• More than 50% of your driving is at sustained high speeds during hot weather , above 90°F (32°C). • T railer towing. NOTE: If ANY of these apply to you then change your engine oil every 3,000 miles (5 000 km) or 3 months, whichever comes first. Refer to “Maintenance Schedule B” in Section 8 of this manual. If none of these apply to you,[...]

Engine Oil V iscosity SAE 0W -40 engine oil is preferred for use within the operating temperatures shown in the engine oil viscosity chart. SAE 5W -40 engine oil is also allowed. The proper SAE viscosity grade of engine oil should be selected based on the following recommendation and be within the operating temperature shown in the engine oil vis- [...]

Synthetic Engine Oils Y ou may use synthetic engine oils provided the recom- mended oil quality requir ements are met, and the r ecom- mended maintenance intervals for oil and filter changes are followed. Materials Added to Engine Oil The manufacturer str ongly recommends against the ad- dition of any additives (other than leak detection dyes) to t[...]

At the mileage indicated on the appropriate “Mainte- nance Schedule,” all belts and tensioner should be checked for condition. Improper belt tension can cause belt slippage and failure. Belts should be inspected for evidence of cuts, cracks, glazing, or frayed cords and r eplaced if there is indication of damage which could result in belt failu[...]

Fuel Filter A plugged fuel filter can cause stalling, limit the speed at which a vehicle can be driven or cause hard starting. Should an excessive amount of dirt accumulate in the fuel tank, filter replacement may be necessary . See your local dealer for service. Catalytic Converter The catalytic converter requir es the use of unleaded fuel only . [...]

W ARNING! A hot exhaust system can start a fire if you park over materials that can burn. Such materials might be grass or leaves coming into contact with your exhaust system. Do not park or operate your vehicle in areas where your exhaust system can contact anything that can burn. In unusual situations involving grossly malfunctioning engine opera[...]

CAUTION! It is essential when replacing the cables on the battery that the positive cable is attached to the positive post and the negative cable is attached to the negative post. Battery posts are marked (+) positive and negative (-) and identified on the battery case. Also, if a “fast charger” is used while battery is in the vehicle, disconne[...]

NOTE: Use only manufacturer appr oved A/C System Sealers, Stop Leak Products, Seal Conditioners, Compr es- sor Oil, or Refrigerants. Refrigerant Recovery and Recycling R-134a Air Conditioning Refrigerant is a hydrofluorocar - bon (HFC) that is endorsed by the Environmental Pr o- tection Agency and is an ozone-saving product. How- ever , the manufac[...]

W ARNING! Fluid level should be checked on a level surface with the engine off to prevent injury from moving parts, and to insure accurate fluid level reading. Do not overfill. Use only the manufacturer’s recommended fluid. If necessary , add fluid to restore to the pr oper indicated level. W ith a clean cloth, wipe any spilled fluid from all sur[...]

Windshield Wiper Blades The rubber edges of the wiper blades and the windshield should be cleaned periodically with a sponge or soft cloth and a mild nonabrasive cleaner . This will remove accu- mulations of salt or road film. Operation of the wipers on dry glass for long periods may cause deterioration of the wiper blades. Always use washer fluid [...]

W ARNING! Commercially available windshield washer solvents are flammable. They could ignite and burn you. Care must be exercised when filling or working around the washer solution. Exhaust System The best protection against carbon monoxide entry into the vehicle body is a properly maintained engine exhaust system. Whenever a change is noticed in t[...]

Cooling System W ARNING! • When working near the radiator cooling fan, dis- connect the fan motor lead or turn the ignition switch to the OFF position. The fan is temperature controlled and can start at any time the ignition switch is in the ON position. • Y ou or others can be badly burned by hot coolant or steam from your radiator . If you se[...]

drain from the coolant r ecovery bottle. DO NOT RE- MOVE THE COOLANT PRESSURE CAP WHEN THE COOLING SYSTEM IS HOT . Cooling System — Drain, Flush and Refill At the intervals shown on the appropriate “Maintenance Schedule,” the system should be drained, flushed and refilled. If the solution is dirty or contains a considerable amount of sediment[...]

Adding Coolant Y our vehicle has been built with an improved engine coolant that allows extended maintenance intervals. This coolant can be used up to 5 Y ears or 100,000 miles (160 000 km) before r eplacement. T o prevent reducing this extended maintenance period, it is important that you use the same coolant throughout the life of your vehicle. P[...]

The cap should be inspected and cleaned if there is any accumulation of foreign material on the sealing surfaces. W ARNING! • The warning words “DO NOT OPEN HOT” on the cooling system pressure cap are a safety pre- caution. Never add coolant when the engine is overheated. Do not loosen or remove the cap to cool an overheated engine. Heat caus[...]

service attendant of this. As long as the engine operating temperature is satisfactory , the coolant bottle need only be checked once a month. When additional coolant is needed to maintain the proper level, it should be added to the coolant bottle. Do not overfill. Points T o Remember NOTE: When the vehicle is stopped after a few miles (a few kilom[...]

• Keep the front of the radiator clean. If your vehicle is equipped with air conditioning, keep the front of the condenser clean, also. • Do not change the thermostat for summer or winter operation. If replacement is ever necessary , install ONL Y the correct type thermostat. Other designs may result in unsatisfactory coolant performance, poor [...]

W ARNING! Riding the brakes can lead to brake failure and possibly an accident. Driving with your foot resting or riding on the brake pedal can result in abnormally high brake temperatures, excessive lining wear , and possible brake damage. Y ou wouldn’t have your full braking capacity in an emergency . Brake And Power Steering Hoses When the veh[...]

should be replaced immediately! Eventual deterioration of the hose can take place resulting in a possibility of a burst failure. W ARNING! W orn brake hoses can burst and cause brake failure. Y ou could have an accident. If you see any signs of cracking, scuffing, or worn spots, have the brake hoses replaced immediately . Brake Fluid Level Check Th[...]

W ARNING! • Overfilling the brake fluid reservoir can result in spilling brake fluid on hot engine parts and the brake fluid catching fire. • Use of a brake fluid that has a lower initial boiling point than the recommended MOP AR DOT 3 product or a brake fluid that is unidentified as to FMVSS specification may result in sudden brake failure dur[...]

Automatic T ransmission Fluid Level Check Regular automatic transmission fluid level checks are not requir ed. For this reason the dipstick is omitted. If you notice fluid loss or gear shift malfunction, have your authorized dealer check the transmission fluid level. CAUTION! The fluid level is preset at the factory and does not require adjustment [...]

The most common causes are: • Road salt, dirt and moisture accumulation. • Stone and gravel impact. • Insects, tree sap and tar . • Salt in the air near seacoast localities. • Atmospheric fallout/industrial pollutants. W ashing • W ash your vehicle regularly . Always wash your ve- hicle in the shade using Mopar t Car W ash or a mild car[...]

Special Care • If you drive on salted or dusty roads or if you drive near the ocean, hose off the under carriage at least once a month. • It is important that the drain holes in the lower edges of the doors, rocker panels and tailgate must be kept clear and open. • If you detect any stone chips or scratches in the paint, touch them up immedia[...]

YES Essentials t Fabric Cleaning Procedure – If Equipped YES Essentials t seats may be cleaned in the following manner: • Remove as much of the stain as possible by blotting with a clean, dry towel. • Blot any remaining stain with a clean, damp towel. • For tough stains, apply Mopar t T otal Clean or a mild soap solution to a clean, damp cl[...]

do not use polishes, oils, cleaning fluids, solvents, deter- gents, or ammonia based cleaners to clean your leather upholstery . Application of a leather conditioner is not requir ed to maintain the original condition. W ARNING! Do not use volatile solvents for cleaning purposes. Many are potentially flammable, and if used in closed areas they may [...]

If the belts need cleaning, use Mopar t T otal Clean, a mild soap solution, or lukewarm water . Do not remove the belts from the vehicle to wash them. Replace the belts if they appear frayed or worn or if the buckles do not work properly . FUSE P ANEL Interior Fuses The fuse panel is on the lower instrument panel just to the left of the steering co[...]

Cav- ity Cartridge Fuse Mini Fuse Description 3 10 Amp Red Htd Mirror (EBL) 4 20 Amp Y ellow Rr Pwr Out (B+) 5 10 Amp Red Rr HV AC (R/O) (Commander Only) 6 Spare (B+) 7 20 Amp Y ellow Door Locks (B+) 8 15 Amp Blue Steer Col Lock (B+) (EL V) 9 20 Amp Y ellow Pwr Outlet (B+) Cav- ity Cartridge Fuse Mini Fuse Description 10 10 Amp Red Final Drive Cont[...]

Cav- ity Cartridge Fuse Mini Fuse Description 14 20 Amp Y ellow Cigar Ltr (R/A) 15 10 Amp Red T ire Pressur e T rans- ducers (R/O) 16 10 Amp Red Steering Control Mod- ule (SCM), Diag. Con- nector , Cluster (B+) 17 15 Amp Blue Flipper Glass (B+) 19 Spare (R/S) 20 10 Amp Red Sentry Key Remote Entry Module (SKREEM), Cluster (R/S) Cav- ity Cartridge Fu[...]

Underhood Fuses (Power Distribution Center) Cav- ity Cartridge Fuse Mini Fuse Description 1 50 Amp Green PTC Heater 1 (Diesel Only) Cav- ity Cartridge Fuse Mini Fuse Description 2 40 Amp Green HID Headlamps 3 50 Amp Green PTC Heater 2 (Diesel Only) 4 30 Amp Pink Power Outlets 5 50 Amp Red PTC Heater 3 (Diesel Only) 6 30 Amp Pink Cig Lighter , T rai[...]

Cav- ity Cartridge Fuse Mini Fuse Description 1 1 40 Amp Green HV AC Blower 12 30 Amp Pink Rear W iper , Ign R/O 13 40 Amp Green Rear W indow De- froster (EBL)/Heated Mirror 14 30 Amp Pink Rear HV AC (If Equipped) 15 — Spare 16 50 Amp Red ASD 17 30 Amp Pink ABS Pump 18 40 Amp Green Accessory Delay , Seats Cav- ity Cartridge Fuse Mini Fuse Descrip[...]

Cav- ity Cartridge Fuse Mini Fuse Description 27 20 Amp Y ellow HD W asher (If Equipped) 28 30 Amp Green ABS V alves 29 20 Amp Y ellow PCM Batt (Gasoline Only) 30 — Spar e 31 — Spar e 32 15 Amp Blue Powertrain Control Module (Diesel Only) 33 20 Amp Y ellow Final Drive Control Module (FDCM) E-Diff 34 — Spar e 35 20 Amp Y ellow T rail-T ow Mod [...]

Underhood Fuses (Integrated Power Module) Cav- ity Cartridge Fuse Mini Fuse Description 8 10 Amp Red Lt Park Lamps Cav- ity Cartridge Fuse Mini Fuse Description 9 10 Amp Red T railer-T ow Park Lamps 10 10 Amp Red Rt Park Lamps 12 20 Amp Y ellow Front Control Module (FCM) Batt #4 13 20 Amp Y ellow Front Control Module (FCM) Batt #2 14 20 Amp Y ellow[...]

Cav- ity Cartridge Fuse Mini Fuse Description 18 20 Amp Y ellow Front Control Module (FCM) Batt #1 19 20 Amp Y ellow Lt T railer-T ow Stop/ T urn 20 20 Amp Y ellow Front Control Module (FCM) Batt #3 21 20 Amp Y ellow Rt T railer-T ow Stop/ T urn 22 30 Amp Pink Final Drive Control Module (FDCM) MOD 23 50 Amp Red Radiator Fan 27 15 Amp Blue Ignition [...]

• Anytime you store your vehicle, or keep it out of service (i.e. vacation) for two weeks or more, r un the air conditioning system at idle for about five minutes in the fresh air and high blower setting. This will insure adequate system lubrication to minimize the possibility of compressor damage when the system is started again. REPLACEMENT BUL[...]

BULB REPLACEMENT High Intensity Discharge Headlights (HID) — If Equipped The headlights are a type of high voltage dischar ge tube. High voltage can remain in the cir cuit even with the headlight switch off and the key r emoved. Because of this, you should not attempt to service a headlight bulb yourself. If a headlight bulb fails, take your vehi[...]

2. T urn the low or high beam bulb 1/4 turn counter clockwise to remove fr om housing. 3. Disconnect the electrical connector and replace the bulb. CAUTION! Do not touch the new bulb with your fingers. Oil contamination will severely shorten bulb life. If the bulb comes in contact with any oily surface, clean the bulb with rubbing alcohol. 348 MAIN[...]

Front T urn Signal 1. Open the hood. 2. T urn the turn signal bulb 1/4 turn counter clockwise to remove fr om housing. 3. Disconnect the electrical connector and replace the bulb. CAUTION! Do not touch the new bulb with your fingers. Oil contamination will severely shorten bulb life. If the bulb comes in contact with any oily surface, clean the bul[...]

Front Fog Light 1. Reach behind the front fascia from under the vehicle. 2. T urn the front fog light bulb 1/4 turn counter clock- wise to remove fr om housing. 3. Disconnect the electrical connector and replace bulb. CAUTION! Do not touch the new bulb with your fingers. Oil contamination will severely shorten bulb life. If the bulb comes in contac[...]

3. Squeeze the socket assembly tabs to remove it from the housing. 4. Pull the bulb to remove it from the socket. 5. Replace the bulb, reinstall the socket, and reattach the light assembly . Center High Mounted Stop Light (CHMSL) 1. Remove the two screws securing the CHMSL. 2. T wist the bulb socket to remove from the CHMSL housing. 3. Pull the bul[...]

FLUID CAP ACITIES U.S. Metric Fuel (Approximate) 21 Gallons 79 Liters Engine Oil with Filter 6.1 Liter Engine (SAE 0W -40, API Certified) 7 Qts 6.6 Liters Cooling System * 6.1 Liter Engine (Mopar t Engine Coolant/Antifreeze 5 Y ear/100,000 Mile Formula) 14.8 Qts 14 Liters * Includes heater and coolant recovery bottle filled to MAX level. 352 MAINT [...]

FLUIDS, LUBRICANTS, AND GENUINE P ARTS Engine Component Fluid, Lubricant, or Genuine Part Engine Coolant Mopar t Antifreeze/Coolant 5 Y ear/100,000 Mile Formula HOA T (Hybrid Or- ganic Additive T echnology) Engine Oil (6.1L Engine) For best performance and maximum protection under all types of operating conditions, the manufacturer only r ecommends[...]

Chassis Component Fluid, Lubricant, or Genuine Part Automatic T ransmission Mopar t A TF+4 Automatic T ransmission Fluid T ransfer Case Mopar t NV146 T ransfer Case Fluid or equivalent. Usage of other fluid/ lubricants is NOT recommended. Axle Differ ential (Front-Rear) Mopar t Synthetic Gear & Axle Lubricant SAE 75W -140 (API-GL5) or equivalen[...]

MAINTENANCE SCHEDULES CONTENTS m Emission Control System Maintenance ........ 3 5 6 m Maintenance Schedules ................... 3 5 6 ▫ Schedule “B” ........................ 3 5 9 ▫ Schedule “A” ........................ 3 6 9 8 M A I N T E N A N C E S C H E D U L E S[...]

EMISSION CONTROL SYSTEM MAINTENANCE The “Scheduled” maintenance services, listed in bold type must be done at the times or mileages specified to assure the continued pr oper functioning of the emission control system. These, and all other maintenance services included in this manual, should be done to provide best vehicle performance and reliab[...]

NOTE: Most vehicles are operated under the conditions listed for Schedule “B.” NOTE: If ANY of these apply to you, change your engine oil every 3,000 miles (5 000 km) or 3 months, whichever comes first, and follow the maintenance rec- ommendations in “Maintenance Schedule B.” NOTE: If ANY of these apply to you then flush and replace your en[...]

Once a Month • Check the tire pr essure and look for unusual wear or damage. • Inspect the battery and clean and tighten the terminals as requir ed. • Check the fluid levels of the coolant reservoir , brake master cylinder , and add as needed. • Check all lights and all other electrical items for correct operation. At Each Oil Change • Ch[...]

Schedule “B” Follow this schedule if you usually operate your vehicle under one or more of the following conditions. • Day or night temperatures ar e below 32°F (0°C) • Stop and go driving • Excessive engine idling • Driving in dusty conditions • Short trips of less than 10 miles (16.2 km) • More than 50% of your driving is at sus[...]

Miles 3,000 6,000 9,000 12,000 15,000 (Kilometers) (5 000) (10 000) (15 000) (20 000) (25 000) Change the engine oil and engine oil filter , if not replaced at 3 months. X X XXX Inspect the engine air cleaner filter , replace if nec- essary . X Drain and refill the fr ont and rear axles. X Inspect the brake linings. X 360 SCHEDULE “B” 8 M A I N[...]

Miles 18,000 21,000 24,000 27,000 30,000 (Kilometers) (30 000) (35 000) (40 000) (45 000) (50 000) Change the engine oil and engine oil filter , if not replaced at 3 months. X X XXX Inspect the engine air cleaner filter , replace if nec- essary . X Inspect the PCV V alve, replace if necessary . L X Drain and refill the fr ont and rear axles. X Insp[...]

Miles 33,000 36,000 39,000 42,000 45,000 (Kilometers) (55 000) (60 000) (65 000) (70 000) (75 000) Change the engine oil and engine oil filter , if not replaced at 3 months. X X XXX Inspect the engine air cleaner filter , replace if nec- essary . X Drain and refill the fr ont and rear axles. X Inspect the brake linings. X 362 SCHEDULE “B” 8 M A[...]

Miles 48,000 51,000 54,000 57,000 60,000 (Kilometers) (80 000) (85 000) (90 000) (95 000) (100 000) Change the engine oil and engine oil filter , if not replaced at 3 months. X X XXX Inspect the engine air cleaner filter , replace if nec- essary . X Inspect the PCV V alve, replace if necessary . L X Inspect drive belt, replace if necessary . X Insp[...]

Miles 63,000 66,000 69,000 72,000 75,000 (Kilometers) (105 000) (110 000) (115 000) (120 000) (125 000) Change the engine oil and engine oil filter , if not replaced at 3 months. X X XXX Inspect the engine air cleaner filter , replace if nec- essary . X Inspect the drive belt, replace if necessary . X Inspect the brake linings. X Drain and refill t[...]

Miles 78,000 81,000 84,000 87,000 90,000 (Kilometers) (130 000) (135 000) (140 000) (145 000) (150 000) Change the engine oil and engine oil filter , if not replaced at 3 months. X X XXX Inspect the engine air cleaner filter , replace if nec- essary . X Inspect the PCV V alve, replace if necessary . L X Inspect the drive belt, replace if necessary [...]

Miles 93,000 96,000 99,000 102,000 105,000 (Kilometers) (155 000) (160 000) (165 000) (170 000) (175 000) Change the engine oil and engine oil filter , if not replaced at 3 months. X X XXX Inspect the engine air cleaner filter , replace if nec- essary . X Replace the spark plugs. X Inspect the drive belt, replace if necessary .* X Inspect the brake[...]

Miles 108,000 11 1,000 114,000 1 17,000 120,000 (Kilometers) (180 000) (185 000) (190 000) (195 000) (200 000) Change the engine oil and engine oil filter , if not replaced at 3 months. XXXXX Inspect the engine air cleaner filter , replace if nec- essary . X Inspect the PCV V alve, replace if necessary . L X Inspect the drive belt, replace if neces[...]

Miles 108,000 11 1,000 114,000 1 17,000 120,000 (Kilometers) (180 000) (185 000) (190 000) (195 000) (200 000) Drain and refill the automatic transmission fluid, and replace filter . X Drain and refill the transfer case fluid. X Flush and replace the engine coolant/anti-fr eeze at 120 months, if not replaced at 102,000 miles (170 000 km). X Inspect[...]

Schedule “A” Miles 6,000 12,000 18,000 24,000 30,000 (Kilometers) (10 000) (20 000) (30 000) (40 000) (50 000) [Months] [6] [12] [18] [24] [30] Change the engine oil and engine oil filter . X X X X X Inspect the engine air cleaner filter , and replace if necessary . X Inspect the brake linings. X Drain the transfer case and refill. X SCHEDULE ?[...]

Miles 36,000 42,000 48,000 54, 000 (Kilometers) (60 000) (70 000) (80 000) (90 000) [Months] [36] [42] [48] [54] Change the engine oil and engine oil filter . X X X X Inspect the brake linings. X X 370 SCHEDULE “A” 8 M A I N T E N A N C E S C H E D U L E S[...]

Miles 60,000 66,000 72,000 78,000 (Kilometers) (100 000) (1 10 000) (120 000) (130 000) [Months] [60] [66] [72] [78] Change the engine oil and engine oil filter . X X X X Inspect the engine air cleaner filter , and replace if nec- essary . X Inspect the PCV V alve, replace if necessary . L X Inspect the drive belt, replace if necessary . X Flush an[...]

Miles 84,000 90,000 96,000 102, 000 (Kilometers) (140 000) (150 000) (160 000) (170 000) [Months] [84] [90] [96] [102] Change the engine oil and engine oil filter . X X X X Inspect the engine air cleaner filter , and replace if nec- essary . X Inspect the PCV V alve, replace if necessary . L X Replace the spark plugs. X Inspect the drive belt, repl[...]

Miles 108,000 1 14,000 120,000 (Kilometers) (180 000) (190 000) (200 000) [Months] [108] [1 14] [120] Change the engine oil and engine oil filter . X X X Inspect the engine air cleaner filter , and replace if necessary . X Inspect the PCV V alve, replace if necessary . L X Inspect the drive belt, replace if necessary .* X Inspect the brake linings.[...]

W ARNING! Y ou can be badly injured working on or around a motor vehicle. Do only that service work for which you have the proper equipment. If you have any doubt about your ability to perform a service job, take your vehicle to a competent mechanic. 374 SCHEDULE “A” 8 M A I N T E N A N C E S C H E D U L E S[...]

IF YOU NEED CONSUMER ASSIST ANCE CONTENTS m Suggestions For Obtaining Service For Y our V ehicle .............................. 3 7 6 ▫ Prepar e For The Appointment ............ 3 7 6 ▫ Prepar e A List ........................ 3 7 6 ▫ Be Reasonable W ith Requests ............. 3 7 6 m If Y ou Need Assistance ................... 3 7 6 m W arra[...]

SUGGESTIONS FOR OBT AINING SERVICE FOR YOUR VEHICLE Prepare For The Appointment If you’re having warranty work done, be sur e to have the right papers with you. T ake your warranty folder . All work to be performed may not be covered by the warranty , discuss additional charges with the service manager . Keep a maintenance log of your vehicle’s[...]

technicians, special tools, and the latest information to assure your vehicle is fixed corr ectly and in a timely manner . This is why you should always talk to your dealer’s service manager first. Most matters can be resolved with this process. • If for some reason you ar e still not satisfied, talk to the general manager or owner of the deale[...]

Customer Assistance For The Hearing Or Speech Impaired (TDD/TTY) T o assist customers who have hearing difficulties, the manufacturer has installed special TDD (T elecommuni- cation Devices for the Deaf) equipment at its Customer Center . Any hearing or speech impaired customer who has access to a TDD or a conventional teletypewriter (TTY) in the U[...]

W ARNING! Engine exhaust, some of its constituents, and certain vehicle components contain or emit chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. In addition, certain fluids contained in vehicles and certain prod- ucts of component wear contain or emit chemicals known to the State of Califor[...]

T o contact NHTSA, you may either call the Auto Safety Hotline toll free at 1–888–327–4236 (TTY : 1–800–424– 9153), or go to http://www .safercar .gov; or write to: Administrator , NHTSA, 400 Seventh Street, SW ., W ash- ington, DC 20590. Y ou can also obtain other information about motor vehicle safety from http:// www .safercar .gov .[...]

• Diagnostic Procedure Manuals. Filled with diagrams, charts and detailed illustrations, these practical manuals make it easy for students and technicians to find and fix problems on computer - controlled vehicle systems and featur es. They show exactly how to find and correct pr oblems the first time, using step-by-step troubleshooting and drive[...]

DEP ARTMENT OF TRANSPORT A TION UNIFORM TIRE QUALITY GRADES The following describes the tire grading categories estab- lished by the National highway T raffic Safety Adminis- tration. The specific grade rating assigned by the tire’s manufacturer in each category is shown on the sidewall of the tires on your car . All Passenger Car T ires Must Con[...]

T emperature Grades The temperature grades ar e A (the highest), B, and C, repr esenting the tire’s r esistance to the generation of heat and its ability to dissipate heat when tested under controlled conditions on a specified indoor laboratory test wheel. Sustained high temperature can cause the material of the tire to degenerate and r educe tir[...]

[...]

INDEX 10[...]

ABS (Anti-Lock Brake System) ............ 175,254 Adding Engine Coolant (Antifreeze) .......... 3 2 6 Adding Fuel ........................... 2 8 2 Adding W asher Fluid ..................... 1 6 8 Additives, Fuel ......................... 2 8 0 Adjustable Pedals ....................... 1 3 0 Air Conditioner Maintenance ............... 3 1 9 Air Con[...]

Battery ............................... 3 1 8 Emergency Starting ..................... 3 0 0 Keyless T ransmitter Replacement (RKE) ....... 2 3 Saving Feature (Pr otection) ............... 1 1 9 Bearings .............................. 3 3 3 Belts, Drive ............................ 3 1 5 Belts, Seat .............................. 3 6 Body Mechanism[...]

Cellular Phone .......................... 7 7 Center High Mounted Stop Light ............ 3 5 1 Chart, T ire Sizing ........................ 2 6 0 Checks, Safety ......................... 67,68 Child Restraint .................... 56,57,61,63 Child Restraint T ether Anchors ............. 60,61 Child Safety Locks ........................ 2 8 Clean A[...]

Daytime Running Lights ................... 1 2 3 Dealer Service .......................... 3 1 0 Defroster , Rear W indow ................... 1 6 8 Defroster , W indshield ................... 68,234 Diagnostic System, Onboard ................ 3 0 7 Digital V ideo Disc (DVD) Player ............. 2 1 2 Dimmer Switch, Headlight ................. 1 2 4[...]

Air Cleaner Filter ...................... 3 1 6 Break-In Recommendations ................ 6 6 Checking Oil Level ..................... 3 1 1 Compartment ......................... 3 0 6 Compartment Identification ............... 3 0 6 Coolant (Antifreeze) .................... 3 2 4 Cooling ............................. 3 2 4 Exhaust Gas Caution ....[...]

Fluid Capacities ......................... 3 5 2 Fluid Leaks ............................. 6 8 Fluid Level Checks Brake ............................... 3 3 1 Cooling System ....................... 3 2 4 Engine Oil ........................... 3 1 1 Power Steering ........................ 3 2 0 Fluids, Lubricants and Genuine Parts .......... 3 5 3 Fo[...]

Fuel ................................ 1 8 1 Speedometer ......................... 1 7 4 T achometer .......................... 1 7 6 Gear Ranges ........................... 2 4 8 General Information ............... 18,24,104,278 Glass Cleaning .......................... 3 3 7 Gross Axle W eight Rating .................. 2 8 6 Gross V ehicle W eight[...]

Instrument Panel and Contr ols .............. 1 7 2 Instrument Panel Lens Cleaning ............. 3 3 7 Integrated Power Module (Fuses) ............ 3 4 4 Interior Appearance Care .................. 3 3 6 Interior Fuses .......................... 3 3 8 Interior Lighting ........................ 1 2 5 Interior Lights ....................... 122,125 I[...]

C a r g o .............................. 1 6 2 Center Mounted Stop ................... 3 5 1 Cruise .............................. 1 8 0 Daytime Running ...................... 1 2 3 Dimmer Switch, Headlight ............. 1 19,124 Electronic Stability Pr ogram (ESP) Indicator ....................... 141,176,180 Electronic Thr ottle Control W arning [...]

V oltage ............................. 1 8 1 Load Floor , Cargo ....................... 1 6 6 Loading V ehicle T i r e s ............................... 2 6 3 Locks ................................. 2 6 Automatic Door ........................ 2 7 Child Protection ........................ 2 8 Door ................................ 2 6 Power Door ....[...]

MP3 Player ............................ 2 1 2 MTBE/ETBE ........................... 2 7 9 Multi-Function Control Lever ............... 1 1 9 Navigation Radio ........................ 2 1 5 Navigation System ....................... 2 1 5 New V ehicle Break-In Period ................ 6 6 Occupant Restraints ....................... 3 4 Octane Rating, [...]

Pets .................................. 6 5 Pets, T ransporting ........................ 6 5 Phone, Cellular .......................... 7 7 Phone, Hands-Free (UConnect™) ............. 7 7 Placard, T ire and Loading Information ......... 2 6 3 Polishing and W axing ..................... 3 3 4 Port Universal Serial Bus (USB) ................ 2 1 2 [...]

Rear Seat, Folding ....................... 1 1 1 Rear W indow Defroster ................... 1 6 8 Rear W indow Features .................... 1 6 7 Rear W iper/W asher ...................... 1 6 7 Reclining Front Seats ..................... 1 0 4 Recorder , Event Data ...................... 5 4 Recreational T owing ...................... 2 9 6 Refor[...]

Child Restraint ....................... 56,63 Extender ............................. 4 4 Front Seat ............................ 3 6 Inspection ............................ 6 7 Maintenance ........................ 67,337 Pretensioners .......................... 4 2 Reminder ............................ 1 8 0 Shoulder Belt Anchorage ................[...]

Sound Systems (Radio) .................... 2 1 2 Spark Plugs ............................ 3 1 6 Speed Control (Cr uise Control) .............. 1 3 1 Speedometer ........................... 1 7 4 Starting ............................... 2 4 2 Automatic T ransmission ................. 2 4 2 Cold W eather ......................... 2 4 3 Engine Fails t[...]

T ire Markings .......................... 2 5 9 T ire Safety Information .................... 2 5 9 T i r e s ............................ 68,267,382 Air Pressur e .......................... 2 6 9 Alignment and Balance .................. 2 7 4 General Information .................... 2 6 7 High Speed .......................... 2 7 0 Inflation Press[...]

Automatic ........................ 247,333 Range Indicator ....................... 1 8 1 Shifting ............................. 2 4 5 T ransmitter Battery Service (Remote Keyless Entry) ................................. 2 3 T ransmitter , Garage Door Opener (HomeLink t ) . . 148 T ransmitter Programming (Remote Keyless Entry) ......................[...]

W ashers, W indshield .................. 126,322 W ashing V ehicle ......................... 3 3 4 W axing and Polishing ..................... 3 3 4 Wheel Alignment and Balance ............... 2 7 4 Wheel and Wheel T rim .................... 3 3 5 Wheel and Wheel T rim Care ................ 3 3 5 Wheel Bearings ......................... 3 3 3 W ind[...]

INTRODUCTION INTRODUCTION ROLLOVER WARNING HOW TO USE THIS MANUALWARNINGS AND CAUTIONS VEHICLE IDENTIFICATION NUMBER VEHICLE MODIFICA TIONS/ALTERATIONS THINGSTO KNOW BEFORE STARTING YOUR VEHICLE A WORD ABOUT YOUR KEYS Wireless Ignition Node (WIN)Fob with Integrated Key (FOBIK)Ignition Key RemovalKey-In-Ignition ReminderSENTRY KEY Replacement KeysCu[...]