John Lewis JLBICM 01 manuale d’uso

JLBICM 01 Coffee machine Instruction manual[...]

[...]

Important Safety Information It is most important tha t this instruc tion book should be retained with the app liance for futu re reference. Shoul d the appliance be sol d or transferr ed to another owner, or should you move house and leave th e appliance, alwa ys ensure that the book is supplied wit h the appliance in o rder tha t the new owner c [...]

During use For installation and servicing Keep this instruction manual together with the machine for any future refere nce. If the machine is sold or transferred to another person, make sure that this instru ction manual is given to the new user, so that he/she can become familiar wit h the machineÊs functio ns and with the recommendations given. [...]

3 Contents For the User For the Installer Important safety inform ation 1 Installation 5 Description of the coffee machine 4 • Building-in 5 The control panel 10 • Components for the installing the machine 5 • touch controls 10 • Electrical connection 5 Instruction for the first use 11 • Installing the machine 7 • filling up the water r[...]

4 Description of the A ppliance 1. Water reservoir 2. Brita filter 3. Coffee Outlet 4. Steam/water nozzle 5. Drip tray 6. Coffee beans container 7. Grinding regulation knob 8. Control panel 9. „Used‰ coffee drawer[...]

5 Installation Building-in Installing the machine i nto kitchen furni ture with proper char acteristics will ensure a correct operation of the e quipment. Complying with the safety rules, ensure a proper protection against any co ntact with the electric components and with the parts protected only by f unctional insula tion, by housing the machine [...]

6 • Unscrew the cable clamp av ailable on the machine. • Fix the power cable onto the machi ne as shown in the figure. • Connect the power cable as shown in the figure. This machine is designed for a single phase voltage of 23 0V. The power supply requires only outlets of 13A fuse and a double pole isolatio n switch with at least 3 mm be twee[...]

7 Installing the machine • Lay the U base plate of the machine on the shelf of the cabinet. • Insert the L plates, compensati ng for any space. The wid th of the housing un it the coffee machine depe nds on the thickness of the cabinetÊs sides. six side plates (four being 2 mm thick and two 1 mm thick) are provided to compensate for the differ[...]

8 • Fix the U base plate inserting 4 self-threading screws into the 4 fro nt holes of the same plate. Then screw the telescopic runners to each side with the remain ing 8 self-threading screw. • Insert the machine into the hous ing by coupling the machine to the runners fixed to the sides of the carcass. • Slide the machine into the cabinet u[...]

9 Technical specifications Width 594 mm Depth 475 mm Height 378 mm Capacity of water reservoir 2.5 l Net weight 28 kg Gross weight 31 kg Supply voltage 230 V Rated power 2000 W Power absorbed by the heating element 1700 W Power absorbed by the pump 50 W Working pressure 12 bar Fuse 13 A Electrical connection Any electrical work required to insta ll[...]

10 The control panel 1. Water refill indicator 2. ON-OFF/stand-by indicator 3. Start indicator 4. Hot water selector indicator 5. Steam selector indicator 6. Light selector indicator 7. Espresso coffee indicator 8. Regular coffee indicator 9. Used Coffee 'drawer full' indicator 10. ON-OFF/stand-by control 11. Start control 12. Hot water s[...]

11 Instructions for the first use Filling up the water reservoir • Squeeze together the unlockin g levers found under the dri p tray • Gently pull the coffee machine forward from the housing by sliding it along the telescopic runners. Hardness of water: • Before filling up the water re servoir, make sure that the decalcifying Brita filter has[...]

12 • Remove the reservoir and fill it with approximate ly 2.5 litres of water as shown. • replace the water reservoir in its own ho using tankig care to fully e ngage the water valve into the docking sta tion. • Ensure the mains ON/O FF switch(at rear) is ON • push the machine back in to the housing until a „CLICK‰ can be heard. This in[...]

13 Filling up the container with coffee beans • Press the unlocking levers located under th e drip tray and pul l the machine as it is shown in the figure. • pull the coffee machine forward from the housin g along the telescopic runn ers . • Pour approximately 200 g of coffee beans i nto the container on the top as shown i n the figure.[...]

14 • Push the machin e back into the housin g until a „CLICK‰ can be heard. This indicate that the mac hine has been locked in position. Initial start-up • Put the main switc h in position 1 • The led corresponding to the ON-OFF con trol will blink rapi dly for 3 minutes. • The machine is be in stand-by mode when the ON-OFF LED i s blin[...]

15 Adjusting the texture ground coffee CAUTION This machine is calibrated in the factor y for an optimum level of ground coffee. Too „coarse‰ ground coffee will result in a weaker coffee. Too „fine‰ groun d coffee will result in very strong coffee, delivered by „drops‰ and tasting „bitter‰. The time required for an espresso will ran[...]

16 • Push the machine back into th e housing until a „click‰ can be heard. This indicates that the machine is locked in position. Stand-by mode • Once powered and inserted i nto the cabi net, the machine is in stand- by mode: this will be signaled by the on/off LED blinking. • Press the start control to switch on the mac hine: the start L[...]

17 Making coffee • Press the control corresponding to the desired selectio n. • Press the start control within 10 seconds an d the machine will make the coffee selec ted. • The machine will stop automatica lly CAUTION: the desired function will be disabled if the start control is not pressed within 10 seconds. It will then be necessary to rep[...]

18 • The steam/water pipe can be moved to the back of the cabinet when no t in use. Hot water Pull forward when required. CAUTION: when HOT! To dispense hot water, place a container u nder the steam/water nozz le; then press the water control. • the desired amount is disp ensed. To stop the water Do not touch • Press and hold the start contro[...]

19 Steam - Heating liquids • The steam/water pipe can be moved to the back of the cabinet when no t in use. Pull forward when required. CAUTION: Do not touch when HOT! • Press the steam control and the corres ponding indicator blinks for 20 s econds. The machine will be ready to make steam when the indicator stops bl inking and remains lit. •[...]

20 Programming the amount of coffee beans to be grinded • This espresso machine has already been calibrated in factory to dispense the ideal measure of ground coffee for one cup of espresso. • However this quantity of gro und coffee can be increased or reduced, then the select ed measure is stored. The programmable measure of ground coffee re f[...]

21 • Once you have modified the coffee gr ound quantity, press the start contr ol for 10 seconds and the machine will automatically sa ve the quantity desired and it will return to stand-by mode. CAUTION: the correct grinding time can change if a different kind of coffee is used. If any unpressed coffee powder is found when emptying the „use d?[...]

22 Programming the volume of coffee dispensed in the cup • The volume of coffee dispensed can be adjusted as desired as follows: • Press the espresso control. • Keep the start control presse d until the programme starts (approximately 5 seconds); the start control LED flas hes. • When the desired quantity of coffee has been dispensed, pr es[...]

23 If you wish to reset the standard values Resetting standard values • This coffee machine is calibrated in th e factory to make the optimum Italian espr esso, the values set for the espr esso coffee distribute 30 cc, the values se t for the regular coffee is 80 cc. • if the standard values have to be reset From the sta nd-by control switch on[...]

24 Signal and alarms Water refill indicator • This machine has a sensor which detect s when the water reservoir is empty. • the reservoir empty led will il luminate. The mach ine will not operate until t he water reservoir is refilled. Volumetric counter fault • This machine has a volumetric counter which detects the am ount of water distri b[...]

25 Cleaning Outer parts • Clean the stainless steel parts of the machine with a soft cloth without using aggressive deterg ents . Never use any abrasive sponges nor steel wool to clean th e parts of steel. Dry well with a soft cloth. Steam nozzle • Remember to clean the steam nozzle perio dically that can get internally dirty by frothing the m [...]

26 Drip tray • Remove the drip tray from the machine as it is shown in the figures above. • Make sure that the drip tray is periodically drain ed to pr event any liquid from seeping out and dirtying/damaging the underlying furnit ure. Drip tray and relevant grill ca n be washed in a dishwasher. To empty the „used‰ coffee drawer • It is ne[...]

27 • Replace the drawer and close the door. Replace the drip tray. Water reservoir • If the machine is not used for long per iods, change the wa ter in the reservoir and drain the boiler by pressing the coffee button several times. • Clean the water reservoir periodically . • The water reservoir can be washed in a dishwasher. • When using[...]

28 Repairs - after sales service If your coffee machine is not performi ng sat isfactorily, consult the fa ult finding guide wit hin this instruction book (somet hi ng not working). If a fault occurs which you can not resolve thro ugh following the advice and in formation contained w ithin the instructio n manual, the next step is to cont act our e[...]

[...]

John Lewis Partnership 171 Victoria Street London SW I E 5NN www.johnlewis.com[...]