Johnson Controls XT-9100 manuale d’uso

System 9100 Technical Manual 636.4 Configuration Guides Section Configuration Guide Issue Date 0896 © 1996 Johnson Cont rols, I nc. 1 Code No. LIT-6364050 XT-9100 Extension Module/ XP-910x Expansion Modules Page 3 • Introduction 3 • Hardware C onfigurati on 4 • Model Codes 4 Software Configur ation 7 • XT-9100 Type Settings 7 • XT-9100 C[...]

2 Configuration Guides— XT-9100 Configur ation Guide[...]

Configuration Guides— XT-9100 Configur ation Guide 3 XT-9100 Extension Module/ XP-910x Expansion Modules The XT-9100 Extension Module and its expansion modules have been designed to provide additional input and output capacity within Metasys  Networks and specifically for the DX-9100 Extended Digital Controller. The XT-9100 module provides the[...]

4 Configuration Guides— XT-9100 Configur ation Guide For full details of the hardware configuration, refer to the XT-9100 Technical Bulletin (LIT-6364040) . An XT-9100 combined with expansion modules provides the following configurations, either: • eight analog inputs/outputs, or • eight digital inputs/outputs, with digital counters associate[...]

Configuration Guides— XT-9100 Configur ation Guide 5 XP9103 DO1 DO2 DO3 DO4 DO5 DO6 DO7 DO8 XP9102 ADDRESS A B C A B C RD TD Power RS485 FUS E HOT GND NEUT EXP EXP FUS E min max XT9100 TR9100 EXP EXP max AO7 AO8 min EXP Bus Connector (provided) emtxt-4 DO5 DO6 DO7 DO8 AI5 AI 6 V AO 7 AO8 24V C 24V COM 24V COM DO1 DO2 DO3 DO4 +15V AI1 AI2 AI3 AI4 [...]

6 Configuration Guides— XT-9100 Configur ation Guide[...]

Configuration Guides— XT-9100 Configur ation Guide 7 Software Configuration Software configuration involves the setting of all the Items of the extension module to values which correspond to the intended application. Typically, use the GX Tool to configure a system, and the SX Tool to troubleshoot. To use these tools, refer to the GX-9100 Softwar[...]

8 Configuration Guides— XT-9100 Configur ation Guide Via the SX Tool The “Output Hold/Reset on Communication Failure” flag is set at Bit X2 of Item XTS (RI.69). X2 = 0 Output reset upon communication failure X2 = 1 Output hold upon communication failure When communication fails for the period set in this Item, the XT-9100 goes into “communi[...]

Configuration Guides— XT-9100 Configur ation Guide 9 Via the GX Tool The I/O type and map details are automatically generated by the GX-9100 Graphic Configuration Software when all I/O data for extension modules has been entered. It is then downloaded into the XT-9100 directly or via the DX-9100 and XT-Bus. (Refer to the Download/Upload section, [...]

10 Configuration Guides— XT-9100 Configur ation Guide Note: The data base in the XT-9100 has been designed to accept most configuration of inputs and outputs. All inputs and outputs which are physically connected through expansion modules must be configured, and only those points. If there is a difference between the physical configuration and th[...]

Configuration Guides— XT-9100 Configur ation Guide 11 Via the SX Tool The input type for the eight possible inputs (n = 1 to 8) can be configured in Item AITn (RI.88, RI.96, RI.104, RI.112, RI.120, RI.128, RI.136, and RI.144). The unit of each analog input can be selected with following bits: (For RTD inputs, Celsius or Fahrenheit must be selecte[...]

12 Configuration Guides— XT-9100 Configur ation Guide An alarm from the High Limit (HIAn) and Low Limit Alarm (LOAn) will be generated from the unfiltered or filtered input. (See Filter Time Constant .) Via the GX Tool Select XTn, AIn, and Data. At the “Alarm Unfiltered” field, enter “0” for No (Alarm on Filtered Value), or “1” for Ye[...]

Configuration Guides— XT-9100 Configur ation Guide 13 Via the SX Tool Input Type: X7 = 0 0-10 volts X7 = 1 0-20 mA X8 = 1 20% suppression 2-10V or 4-20 mA) Linearization and Sensor Type: X11 X10 X9 = 000 Linear (Active Sensor) X11 X10 X9 = 001 Ni 1000 RTD Passive Sensor (JCI Type) (-45 to +121 ° C/-50 to +250 ° F) X11 X10 X9 = 010 Ni 1000 RTD H[...]

14 Configuration Guides— XT-9100 Configur ation Guide Via the SX Tool The high limit is at Item HIAn (RI.91, RI.99, RI.107, RI.115, RI.123, RI.131, RI.139, and RI.147), the low limit is at Item LOAn (RI.92, RI.100, RI.108, RI.116, RI.124, RI.132, RI.140, and RI.148). These Items may also be set by a Supervisory System and will always be set by a [...]

Configuration Guides— XT-9100 Configur ation Guide 15 An XT-9100 can accept up to 16 digital inputs, which will be considered active when driven to a common digital ground. The first eight digital inputs are connected to XP1 and the next eight digital inputs to XP2. Each digital input is defined and configured by the following parameters: • Tag[...]

16 Configuration Guides— XT-9100 Configur ation Guide The digital input transitions of XP1 are counted as follows: Digital Input DIn Prescale PCn Count Transition Pulse Counter CNTRn (RI.09) (RI.48-55) (RI.32-39) emcmxt-3 Figure 3: Counter Prescaler A count transition occurs when the number of positive transitions of the digital input (DIn) equal[...]

Configuration Guides— XT-9100 Configur ation Guide 17 Via the GX Tool Select XTn, ANALOG, XTn, AOn, and Data, then enter the output code: 0 = disabled 1 = 0 to 10 VDC 2 = 0 to 20 mA 3 = 4 to 20 mA Via the SX Tool The output type can be configured in Item AOT (RI.87) in bit pairs X2 X1, X4 X3, ...X16 X15 for Outputs 1-8). To define the output sign[...]

18 Configuration Guides— XT-9100 Configur ation Guide The source of the analog output signal is defined in the DX-9100 Controller. Via the GX Tool Select XTn, AOn, Data, and the “Source Point” field. Enter * and select the required source variable. Via the SX Tool Refer to the Extension Module Configuration section of the DX-9100 Configuratio[...]

Configuration Guides— XT-9100 Configur ation Guide 19 Each digital output is defined and configured by the following parameters: • Tag name (GX-9100 only) • Output type • Pulse time When the XT is connected to a DX-9100 Controller, the following parameter is defined in the DX-9100 for the digital output: • Source Via the GX Tool Select XT[...]

20 Configuration Guides— XT-9100 Configur ation Guide The source of the digital output signal is defined in the DX-9100 Controller. Via the GX Tool Select XTn or (EXP), DOn, Data, and then the “Source Point” field. Enter * and select the required source variable. Via the SX Tool Refer to the Extension Module Configuration section in the DX-91[...]

Configuration Guides— XT-9100 Configur ation Guide 21 Download via DX-9100 Controll er and N2 Bus Connect an RS-232-C/RS-485 converter (type MM-CVT101-x in North America and type IU-9100-810x in Europe) to one of the serial communication ports (COM1 or COM2) of the personal computer on which the GX Tool is running. Connect the N2 Bus of the DX-91[...]

22 Configuration Guides— XT-9100 Configur ation Guide Upload via a DX-9100 Controll er Only complete DX-9100/XT-9100 configurations should be uploaded from the DX-9100. Select DX-9100 and NEW to clear the PC screen. Select DX-9100, UPLOAD, and DX&XT. Enter the DX-9100 Controller address (0-255) and PC port (1 or 2). Press <Enter>. Downl[...]

Configuration Guides— XT-9100 Configur ation Guide 23 Appendix 1: SX Tool Item Description and Tables The following information is important when commissioning with the SX Service Module. Each constant, variable, or value in an XT-9100 Extension Module can be addressed via an Item code. All Items are contained in the Item List. Note: It is import[...]

24 Configuration Guides— XT-9100 Configur ation Guide 3. Totalized Numerical Items are actual positive numbers. They refer to totalized values of pulse counters. They are displayed and entered as whole numbers, without a sign or decimal point. These Items are shown in the Item List with “4 Bytes” in the Type column. 4. Status Items are either[...]

Configuration Guides— XT-9100 Configur ation Guide 25 A DX-9100 floating point number consists of two bytes with following format: 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 E3 E2 E1 E0 S M10 M9 M8 M7 M6 M5 M4 M3 M2 M1 M0 where: EEEE = 4 bits exponent S = sign (1=negative) MMMMMMMMMMM = 11 bits mantissa Note: 2 16 = 32,768; subtracting 4 bits for the [...]

26 Configuration Guides— XT-9100 Configur ation Guide Table 3: Item List RI. HI. Type R/W Tag Description 00 00 1 Byte R MODL Device Model : 08H 01 01 1 Bytes R/W OPMO Operation Mode (status) X8 X7 X6 X5 X4 X3 X2 X1 X1 = 1 Watchdog text X2 = DO Error X3 = DI Error X4 = AI Error X5 = AO Error X6 = Not Used X7 = FAIL XT Fail Mode (= XTS, bit X2) X8[...]

Configuration Guides— XT-9100 Configur ation Guide 27 RI. HI. Type R/W Tag Description 07 07 1 Byte R/W DOS1 Digital Output Status XP1 X8 X7 X6 X5 X4 X3 X2 X1 X1 = 1 XP1 : Output 1 is On X2 = 1 XP1 : Output 2 is On X3 = 1 XP1 : Output 3 is On X4 = 1 XP1 : Output 4 is On X5 = 1 XP1 : Output 5 is On X6 = 1 XP1 : Output 6 is On X7 = 1 XP1 : Output 7[...]

28 Configuration Guides— XT-9100 Configur ation Guide RI. HI. Type R/W Tag Description 10 0A 1 Byte R DIS2 Digital Input Status XP2 X8 X7 X6 X5 X4 X3 X2 X1 X1 = 1 XP2 : Digital Input 1 is On X2 = 1 XP2 : Digital Input 2 is On X3 = 1 XP2 : Digital Input 3 is On X4 = 1 XP2 : Digital Input 4 is On X5 = 1 XP2 : Digital Input 5 is On X6 = 1 XP2 : Digi[...]

Configuration Guides— XT-9100 Configur ation Guide 29 RI. HI. Type R/W Tag Description 12 0C Number R AI1 Analog Input Value 1 13 0D Number R AI2 Analog Input Value 2 14 0E Number R AI3 Analog Input Value 3 15 0F Number R AI4 Analog Input Value 4 16 10 Number R AI5 Analog Input Value 5 17 11 Number R AI6 Analog Input Value 6 18 12 Number R AI7 An[...]

30 Configuration Guides— XT-9100 Configur ation Guide RI. HI. Type R/W Tag Description 48 30 1 Byte Int CNF PC1 Prescaler DI1 Counter 49 31 1 Byte Int CNF PC2 Prescaler DI2 Counter 50 32 1 Byte Int CNF PC3 Prescaler DI3 Counter 51 33 1 Byte Int CNF PC4 Prescaler DI4 Counter 52 34 1 Byte Int CNF PC5 Prescaler DI5 Counter 53 35 1 Byte Int CNF PC6 P[...]

Configuration Guides— XT-9100 Configur ation Guide 31 RI. HI. Type R/W Tag Description 65 41 1 Byte CNF DIT2 Digital Input Type XP2 X8 X7 X6 X5 X4 X3 X2 X1 X1 = 0 XP2 : DI1 = Maintained Contact X1 = 1 XP2 : DI1 = Pulse Contact X2 = 0 XP2 : DI2 = Maintained Contact X2 = 1 XP2 : DI2 = Pulse Contact X3 = 0 XP2 : DI3 = Maintained Contact X3 = 1 XP2 :[...]

32 Configuration Guides— XT-9100 Configur ation Guide RI. HI. Type R/W Tag Description 67 43 1 Byte CNF DOT2 Digital Output Type XP2 X8 X7 X6 X5 X4 X3 X2 X1 X1 = 0 XP2 : DO1 = ON/OFF Type X1 = 1 XP2 : DO1 = Pulse Type X2 = 0 XP2 : DO2 = ON/OFF Type X2 = 1 XP2 : DO2 = Pulse Type X3 = 0 XP2 : DO3 = ON/OFF Type X3 = 1 XP2 : DO3 = Pulse Type X4 = 0 X[...]

Configuration Guides— XT-9100 Configur ation Guide 33 RI. HI. Type R/W Tag Description 77 4D 1 Byte CNF IOMAP Extension Module I/O Map X8 X7 X6 X5 X4 X3 X2 X1 X1 = 0 XP1 : I/O1 and I/O2 Not Used X1 = 1 XP1 : I/O1 and I/O2 Used X2 = 0 XP1 : I/O3 and I/O4 Not Used X2 = 1 XP1 : I/O3 and I/O4 Used X3 = 0 XP1 : I/O5 and I/O6 Not Used X3 = 1 XP1 : I/O5[...]

34 Configuration Guides— XT-9100 Configur ation Guide RI. HI. Type R/W Tag Description 79 4F 1 Byte CNF IOMO D Extension M odule I/O Mode X8 X7 X6 X5 X4 X3 X2 X1 X1 = 0 XP1 : I/O1 and I/O2 Input X1 = 1 XP1 : I/O1 and I/O2 Output X2 = 0 XP1 : I/03 and I/O4 Input X2 = 1 XP1 : I/O3 and I/O4 Output X3 = 0 XP1 : I/O5 and I/O6 Input X3 = 1 XP1 : I/O5 a[...]

Configuration Guides— XT-9100 Configur ation Guide 35 RI. HI. Type R/W Tag Description 88 58 2 Bytes CNF AIT1 Input Type of Analog Input 1 0 0 0 0 0 X1 1 X1 0 X9 X8 X7 X6 X5 X4 X3 X2 X1 X4 X3 X2 X1 Unit of Measure = 0000 No Units = 0001 Degrees Celsius or Kelvin = 0010 Degrees Fahrenheit = 0011 Percent X5 = 1 Enable Square Root of Input X6 = 1 Al[...]

36 Configuration Guides— XT-9100 Configur ation Guide RI. HI. Type R/W Tag Description 104 68 2 Bytes CNF AIT3 Input Type of Analog Input 3 (bits as AIT1) 105 69 Number CNF HR3 High Range Analog Input 3 106 6A Number CNF LR3 Low Range Analog Input 3 107 6B Number R/W (E) HIA3 High Alarm Limit Analog Input 3 108 6C Number R/W (E) LOA3 Low Alarm Li[...]

Configuration Guides— XT-9100 Configur ation Guide 37 RI. HI. Type R/W Tag Description 128 80 2 Bytes CNF AIT6 Input Type of Analog Input 6 (bits as AIT1) 129 81 Number CNF HR6 High Range Analog Input 6 130 82 Number CNF LR6 Low Range Analog Input 6 131 83 Number R/W (E) HIA6 High Alarm Limit Analog Input 6 132 84 Number R/W (E) LOA6 Low Alarm Li[...]

38 Configuration Guides— XT-9100 Configur ation Guide Notes[...]

Configuration Guides— XT-9100 Configur ation Guide 39 Notes[...]

40 Configuration Guides— XT-9100 Configur ation Guide Notes Controls Group FAN 636.4 507 E. Mi chigan St reet Sys tem 9100 Techni cal Manual P.O. Box 42 3 Printed in U.S.A. Milwaukee, WI 53201[...]