JVC CA-MXGT700 manuale d’uso

COMP ACT COMPONENT SYSTEM SISTEMAS DE COMPONENTES COMPACTOS SISTEMA DE COMPONENTE COMPACTO For Customer Use: Enter below the Model No. and Serial No. which are located either on the rear , bottom or side of the cabinet. Retain this information for future reference. Model No. Serial No. LVT0901-004A [UW] CA-MXG500 CA-MXGT700 INSTRUCTIONS MANUAL DE I[...]

– G-1 – Caution –– STANDBY/ON button! Disconnect the mains plug to shut the power off completely. The STANDBY/ON button in any position does not disconnect the mains line. The power can be remote controlled. W arning, Cautions and Others A visos, precauciones y otras notas Advertências, precauções e outras notas Precaución –– Interr[...]

– G-2 – CAUTION T o reduce the risk of electrical shocks, fire, etc.: 1. Do not remove screws, covers or cabinet. 2. Do not expose this appliance to rain or moisture. CAUTION • Do not block the ventilation openings or holes. (If the ventilation openings or holes are blocked by a newspaper or cloth, etc., the heat may not be able to get out.) [...]

Caution: Proper V entilation T o avoid risk of electric shock and fire, and to prevent damage, locate the apparatus as follows: 1 Front: No obstructions and open spacing. 2 Sides/ T op/ Back: No obstructions should be placed in the areas shown by the dimensions below . 3 Bottom: Place on the level surface. Maintain an adequate air path for ventilat[...]

IMPORTANT FOR LASER PRODUCTS IMPORTANTE PARA PRODUCTOS LÁSER IMPOTANTE PARA PRODUCTOS LASER REPRODUCTION OF LABELS / REPRODUCCI Ó N DE ETIQUETAS / REPRODU ÇÃ O DE ETIQUETAS 2 WARNING LABEL, PLACED INSIDE THE UNIT CLASS 1 LASER PRODUCT 1. CLASS 1 LASER PRODUCT 2. CAUTION : Invisible laser radiation when open and interlock failed or defeated. Avo[...]

– 1 – English Introduction About This Manual This manual is org anized as follows: • The manual mainly explains operations using the buttons and contr ols on the unit. Y ou can also use the buttons on the r emote control if they ha ve the same or similar names (or marks) as those on the unit. If operation using the remote contr ol is differen[...]

– 2 – English Contents Location of the Buttons and Controls ....................... 3 Front Panel ................................................................. 3 Remote Control .......................................................... 5 Getting Started ............................................................ 6 Unpacking ...............[...]

– 3 – English Location of the Buttons and Controls Become familiar with the b uttons and controls on your unit. Front Panel DISC CHANGE ST ANDBY/ON STANDBY CD-R/RW PLAYBACK CLOCK /TIMER DISPLA Y PHONES REPEAT REC START /STOP CD REC START DUBBING PROGRAM RANDOM TAP E B TAP E A AUX TAPE CD FM /AM SUBWOOFER LEVEL SOUND MODE CD 2 CD 3 EXTENDED SUPE[...]

– 4 – English See pages in the parentheses for details. Front Panel 1 ST ANDBY/ON button and ST ANDBY lamp (10, 11) 2 CLOCK/TIMER button (10, 22 – 24) 3 DISPLA Y button (10) 4 PRESET +/– buttons (13) 4 / ¢ (re verse search/forward search) buttons (10, 15 – 17, 22 – 24) 5 7 (stop) button (14 – 21) 6 TUNING +/– buttons (13) 1 / ¡ (f[...]

– 5 – English Remote Control Remote Control 1 ST ANDBY/ON button (10) 2 SLEEP button (24) 3 A UX b utton (11) Pr essing this button also turns on the unit. 4 Number buttons (13, 15) 5 KARA OKE button (21) 6 T APE 3 button (11, 18) Pr essing this button also turns on the unit. 7 FM/AM button (11, 13) Pr essing this button also turns on the unit.[...]

– 6 – English 1 Attach the FM antenna to the FM [75 Ω ] coaxial terminal. 2 Extend the FM antenna. 3 Fasten it up in the position which gi ves y ou the best reception, then f ix it on the wall, etc. About the supplied FM antenna The FM antenna supplied with this unit can be used as temporary measure. If reception is poor , you can connect an [...]

– 7 – English 1 Press and hold the clamp of the AM terminal on the rear of the unit. 2 Insert the end of the AM loop antenna cord into the terminal. • If the AM loop antenna wire is cov ered with vinyl, remo ve the vinyl by twisting it as shown in the diagram. 3 Release the f inger from the clamp. 4 T ur n the AM loop antenna until y ou have [...]

– 8 – English Connecting Other Equipment Y ou can connect both analog and digital equipment. • DO NOT connect any equipment while the power is on. • DO NOT plug in any equipment until all connections are complete. T o connect an analog component Be sure that the plugs of the audio cords are color coded: White plugs and jacks are for left au[...]

– 9 – English Canceling the Display Demonstration When connecting the A C po wer cord into a wall outlet, the unit automatically starts display demonstration. On the unit ONL Y : T o cancel the display demonstration, press CANCEL/DEMO. When you pr ess other buttons The display demonstration stops temporarily . It will start automatically again [...]

– 10 – English 3 Press 4 or ¢ to adjust the minute, then press SET . T o check the clock time Press DISPLA Y while playing an y source. • Each time you press the button, the source indication and the clock time alternate on the display . T o adjust the clock again If you hav e adjusted the clock before, you need to press CLOCK/TIMER repeated[...]

– 11 – English Adjusting the Volume Y ou can adjust the v olume level only while the unit is tur ned on. T urn the VOLUME contr ol clockwise to increase the v olume or counterclockwise to decr ease it. • The volume le vel can be adjusted in 32 steps (V OL MIN, V OL 1 — V OL 30, and V OL MAX). When using the remote control, press VOLUME + to[...]

– 12 – English Reinforcing the Bass Sound This function only af fects the playback sound , not your recording. T urn the SUBWOOFER LEVEL control clockwise to incr ease the subwoofer sound or counter clockwise to decrease it. • The subwoofer le vel can be adjusted in 4 steps (LEVEL 1 — LEVEL 4.) If you turn the control clockwise up to the LE[...]

– 13 – English On the unit ONL Y : 1 T une in the station y ou want to preset (in this example, of FM 87.50). • See “T uning in a Station. ” 2 Press SET . 3 Press PRESET + or PRESET – to select a preset number . 4 Press SET again. The tuned station in step 1 is stored in the preset number selected in step 3 . • Storing a new station o[...]

– 14 – English 3 If y ou wish to load a third disc, press DISC CHANGE on the unit or DISC SKIP on the r emote control. The disc tray rotates by 120˚. 4 Press 0 again. The carrousel closes. About the disc indicators Each disc indicator corresponds to the disc tray of the same number . • The disc marker lights up for the disc number you ha ve [...]

– 15 – English 3 Press one of the disc number buttons (CD1, CD2 or CD3) f or the disc you want to start to play fr om. CD play starts from the first track of the selected disc. • Pressing CD 6 instead of the disc number buttons starts playing back if a CD is on the trays. T o stop during play , press 7 . T o remov e the disc, press 0 . CD pla[...]

– 16 – English Programing the Playing Order of the T racks —– Program Play Y ou can arrange the order in which the tracks play bef ore you start playing. Y ou can pr ogram up to 32 tracks. • T o use Repeat play (see page 17) for Program play , press REPEA T after starting Program play . On the unit ONL Y : 1 Load CDs. • If the current p[...]

– 17 – English Playing at Random —– Random Play The tracks of the selected CD will play at random. • T o use Random play , you hav e to cancel the Program play . 1 Load a CD. 2 Press one of the disc number buttons (CD1, CD2, and CD3) f or the disc you want to play , then press 7 . 3 Press RANDOM so that “ RANDOM ” appears on the displ[...]

– 18 – English Playing Back T apes Playing Back a T ape 1 Press EJECT ( 0 ) f or the deck you want to use. 2 Put a cassette in, with the exposed part of the tape down and the side y ou want to play facing front. • Y ou can play back only type I tapes. 3 Close the cassette holder gently . If you put cassettes in both decks A and B, the last de[...]

– 19 – English Recording a T ape on Deck B On the unit ONL Y : 1 Press EJECT 0 f or deck B. 2 Put a recordable cassette in, with the exposed part of the tape down and the side y ou want to record facing fr ont. 3 Close the cassette holder gently . 4 Start playing the source — FM, AM, CD player or auxiliary equipment connected to A UX IN jacks[...]

– 20 – English CD Synchronized Recording Y ou can easily record a CD onto a tape. • Y ou can also record the tracks in order you hav e made the program. On the unit ONL Y : 1 Put a recordable cassette into deck B. 2 Place a disc correctly on the r ecess of the disc tray , with its label side up. 3 Press one of the disc n umber buttons (CD1, C[...]

– 21 – English T o apply an echo to your voice Press ECHO on the remote control so that the echo ( ) indicator lights up on the display . Each time you press the button, the echo le vel changes as follo ws: ECHO 2 applies stronger echo effect to your v oice. Microphone Mixing When you use microphone with any playback source, follo w the procedu[...]

– 22 – English 2 Press CLOCK/TIMER again. “ON TIME” appears for 2 seconds, then the unit enters on-time setting mode. 3 Set the on-time y ou want the unit to turn on. 1) Press 4 or ¢ to set the hour , then press SET . 2) Press 4 or ¢ to set the minute, then press SET . “OFF TIME” appears f or 2 seconds, then the unit enters off-time s[...]

– 23 – English 6 Select the preset station number . Press 4 or ¢ to select the preset station number , then press SET . The unit enters volume setting mode. 7 Press 4 or ¢ to set the v olume level. • Y ou can select the volume le vel from V OL MIN, VOL 1 — V OL 30, and V OL MAX. 8 Press SET to complete the Daily Timer setting . The D AIL [...]

– 24 – English 4 Set the on-time y ou want the unit to turn on. 1) Press 4 or ¢ to set the hour , then press SET . 2 ) Press 4 or ¢ to set the minute, then press SET . “OFF TIME” appears for 2 seconds, then the unit enters off-time setting mode. 5 Set the off-time y ou want the unit to turn off (on standby). 1) Press 4 or ¢ to set the ho[...]

– 25 – English Maintenance T o get the best performance of the unit, keep your discs, tapes, and mechanism clean. Handling cassette tapes • If the tape is loose in its cassette, take up the slack by inserting a pencil in one of the reels and rotating. • If the tape is loose, it may get stretched, cut, or caught in the cassette. • Be caref[...]

– 26 – English Action Press CANCEL/DEMO on the unit. (See page 9.) Check all connections and make corrections. (See pages 6 to 8.) • Reconnect the antennas correctly and securely . • Change the position and direction of the AM loop antenna. • Extend the FM antenna at the best position. Clean or replace the disc. (See page 25.) • Plug th[...]

– 27 – English CA-MXGT700 Amplifier section Output Power SUBWOOFERS : 110 W per channel, min. RMS, driv en into 6 Ω at 63 Hz with no more than 10% total harmonic distortion. MAIN SPEAKERS : 55 W per channel, min. RMS, driven into 4 Ω at 1 kHz with no more than 10% total harmonic distortion. Audio input sensiti vity/Impedance (at 1 kHz, meas[...]

– 28 – English CA-MXG500 Amplifier section Output Power SUBWOOFERS : 80 W per channel, min. RMS, driv en into 6 Ω at 63 Hz with no more than 10% total harmonic distortion. MAIN SPEAKERS : 40 W per channel, min. RMS, driven into 4 Ω at 1 kHz with no more than 10% total harmonic distortion. Audio input sensiti vity/Impedance (at 1 kHz, measur[...]

ANTENNA FM 75 AM [ ] VOLT AGE SETTING 220 12 7 240 110 230- 220 127 240 11 0 VOL T AGE SETTING 230- AUX IN MAIN SPEAKER SUBWOOFER [ ] RR LL [ ] 4-8 6-16 DIGITAL OUT (OPTICAL) VICTOR COMP ANY OF JAP AN , LIMITED 0502KSMMDWSAM EN, SP, PR J V C Mains (AC) Line Instruction (not applicable for Europe, U.S.A., Canada, Australia, and U.K.) Instrucci ó n [...]

VICTOR COMPANY OF JAPAN, LIMITED EN. SP . PR. 0205NSMMD WSAM SPEAKER SYSTEM SP-MXG500 MANU AL DE INSTRUCCIONES: SISTEMA DE AL T A V OCES INSTRUÇÒES: SISTEMA DE AL TIF ALANTES Thank you f or purchasing JVC speakers . Bef ore you begin using them, please read the instructions carefully to be sure you get the best possib le performance. If you ha ve[...]

Connection Conexión Ligaçao CONNECTION • DON'T use other amplifier to operate this speak er system except for CA-MXG500. • T urn off power to the whole system bef ore connecting the speak- ers to the amplifier . • The maximum power handling capacity of the SP-MXG500 main speaker is 40 W/subwoof er is 80 W . Excessiv e input will result[...]

Connection Conexión Ligaçao CONNECTION • DON'T use other amplifier to operate this speak er system except for CA-MXG500. • T urn off power to the whole system bef ore connecting the speak- ers to the amplifier . • The maximum power handling capacity of the SP-MXG500 main speaker is 40 W/subwoof er is 80 W . Excessiv e input will result[...]

VICTOR COMPANY OF JAPAN, LIMITED EN. SP . PR. 0205NSMMD WSAM SPEAKER SYSTEM SP-MXG500 MANU AL DE INSTRUCCIONES: SISTEMA DE AL T A V OCES INSTRUÇÒES: SISTEMA DE AL TIF ALANTES Thank you f or purchasing JVC speakers . Bef ore you begin using them, please read the instructions carefully to be sure you get the best possib le performance. If you ha ve[...]