JVC G2000 manuale d’uso

G2000 INSTRUCTIONS DIGIT AL GRAPHICS PROJECT OR MANUEL D’INSTRUCTIONS : PROJECTEUR GRAPHIQUE NUMÉRIQUE For customer Use: Enter below the Serial No. which is located on the side panel of the cabinet. Retain this information for future reference. Pour l’utilisateur: Inscrivez ci-dessous le No de série situé sur le panneau latéral du coffret d[...]

G2000 Cover(A4) 99.11.19, 10:42 PM 4[...]

1 ENGLISH DIGIT AL GRAPHICS PROJECT OR G2000 INSTRUCTIONS G2000 SubcoverEN 99.11.20, 3:27 AM 1[...]

2 Thank you for purchasing this projector . Before using it, read and follow all instructions carefully to take full advantage of the projector's capabilities. SAFETY PRECAUTIONS W ARNING : TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION : To reduce the risk of electric shock, do not remove cover . R[...]

3 ENGLISH – This product should be operated only with the type of power source indicated on the label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company . – This product is equipped with a three-wire plug. This plug will fit only into a grounded power outlet. If you are unable to in[...]

4 Contents SAFETY PRECAUTIONS ........................... 2 Accessories ............................................... 5 Controls and Features .............................. 6 Front Side / T op Surface / Right Side .................... 6 Left-hand side ....................................................... 7 Bottom Surface .......................[...]

5 ENGLISH Remote control unit (RM-M100U) AAA/R03-size dry cell battery ( × 2) (for checking operation) Power code [approx. 2.5 m (8.2 ft)] Personal computer connection cable [approx. 2 m (6.56 ft)] (D-sub, 3-row 15 pin) Conversion adapter for Mac (for Macintosh) Audio cable [approx. 3 m (9.84 ft)] (3.5 mm dia. stereo mini plug) A V connection cabl[...]

6 Controls and Features Front Side / T op Surface / Right Side 1 Exhaust vents V ents for cooling fans through which warm air comes out. CAUTION • Do not block the exhaust vents, or heat builds up inside, possibly causing a fire. Also, do not touch the vents, or this could cause a low-temperature burn. 2 Carrying handle Raise this handle when car[...]

7 ENGLISH Controls and Features (cont.) Left-hand side w Control panel For details, refer to “Control Panel” (page 9). e Connector panel For details, refer to “Connector Panel” on page 1 1. r Adjustable foot (for horizontal angle adjustment) It is set at the shortest position when shipped from the factory . T urn the foot to make the projec[...]

8 Controls and Features (cont.) Bottom Surface t Air intake area (filter) Air is taken in through this area to cool the light-source lamp. If this area is blocked or if something that obstructs taking in or exhausting air is placed around the projector , heat may build up inside and could cause a fire. For details, refer to “Precautions for Insta[...]

9 ENGLISH Controls and Features (cont.) Control Panel 1 ST AND BY Indicator ON : When in stand-by mode. Blinking : When in cool-down mode. Memo About the cool-down mode: This projector has a function to cool down the heated lamp for a fixed period of time (approx. 120 seconds) after projection is finished. This feature is referred to as the cool-do[...]

10 Controls and Features (cont.) Control Panel (Cont.) 7 VIDEO button Use this button to select a device such as a video deck connected to the A V IN terminal of the projector . Each time you press the button, the device selected changes as follows: p QUICK ALIGN. button While a menu screen is shown, use this button to adjust the values for the ite[...]

11 ENGLISH 1 Y/C (S video) input terminal (Mini DIN 4 pin) Connect this terminal to the S video output terminal of a video deck, etc. 2 VIDEO (composite video) input terminal (BNC) Connect this terminal to the composite video output terminal of a video deck, etc. 3 Y, P B /B-Y , P R /R-Y input terminals (BNC) These are input terminals for component[...]

12 Controls and Features (cont.) Connector Panel (Cont.) 9 COMPUTER IN (computer input) -2 terminal (BNC) These are input terminals for analog RGB signals, vertical sync (V) signals, and horizontal sync (H) signals / composite signals(Cs). Devices which have analog RGB signal output terminals can be connected. * Input of external sync signals is au[...]

13 ENGLISH OPERATE VOL. PAGE BACK PRESET ZOOM FOCUS COMPUTER VIDEO QUICK ALIGN. AV MUTING W T MENU/ENTER 1 2 3 4 5 6 7 8 e w q p 9 Controls and Features (Cont.) Remote Control Unit 1 Remote control’ s signal transmitter 2 COMPUTER button Use this button to select the devices connected to the projector ’s COMPUTER IN (computer input) -1 and -2 i[...]

14 Controls and Features (cont.) Installing Batteries Install batteries in the remote control. If the remote control has started to work erratically , replace the batteries. 1 Open the back cover . While pushing on the back cover , slide it in the direction of the arrow . 2 Install the batteries. Place the two batteries (AAA/R03-size) supplied in t[...]

15 ENGLISH Installing the Projector Precautions for Installation ■ When installing the projector , observe the followings: • Do not use the projector placed on its side. Avoid using the projector placed on its side. This could cause a malfunction. • Use the projector within the installed angle. Avoid using the projector inclined ±30° or mor[...]

16 Installing the Projector (Cont.) Projection Distance and Screen Size ■ The projector ’s projection lens is a zoom lens of about 1.5 x. The screen size at the maximum enlargement is 1.5 times that of the minimum size. ■ The projection distance that can be focused is 2.5 to 20 m. Install the projector within this range. Screen Install the pr[...]

17 ENGLISH Installing the Projector (Cont.) Relationship between Projection Distances and Projection Screen Sizes ■ For 4 : 3 aspect ratio screens 8.2 ft (2.5 m) 42” (approx. 107 cm) 63” (approx. 160 cm) 9.84 ft (3.0 m) 51” (approx. 130 cm) 76” (approx. 193 cm) 13.12 ft (4.0 m) 68” (approx. 173 cm) 102” (approx. 259 cm) 16.4 ft (5.0 m[...]

18 Installing the Projector (Cont.) Effective Range and Distance of the Remote Control Unit The operable distance of the remote control unit is about 10 m (32.8 ft) for direct reception. The remote control can be used by having it reflected on the screen, etc. When you use the remote control by reflecting it at the screen, the total distance of A +[...]

19 ENGLISH Connecting to V arious Devices The following signals can be input to the projector: ■ Video signals (1) Response to color systems * 1 : Responds if Y/C output is available. * 2 : Signifies that component signals (“Y , P B , P R ” / “ Y , B-Y , R-Y” / “G, B, R, H/C S , V”) conform to the signal timing (synchroniza- tion and [...]

20 Memo • When connecting a video device, use a TBC along with it, or one which has a built-in TBC. • Use of an extension cable to connect a video device and the projector could cause video degradation. • When a signal with much jitter is reproduced on a VCR or special- effect playback is performed, the upper part of the picture or the pictur[...]

21 ENGLISH Connecting to Devices which Control the Projector Before connection, be sure to turn off both the projector and devices to be connected. • Read the manual thoroughly which comes with each device to be connected. • By connecting a computer to the RS-232C terminal, you can control the projector . Also, you can make an infrared remote s[...]

22 Connecting to V arious Devices (Cont.) Connecting to Computer Devices Before connection, be sure to turn off both the projector and computer devices. • Read the manual which comes with each device thoroughly . ■ Connection to an IBM PC or IBM-compatible computer • Use the supplied computer connection cable. Also, prepare cables required fo[...]

23 ENGLISH Before connection, be sure to turn off both the projector and computer devices. • Read the manual which comes with each device thoroughly . ■ Connection to Macintosh • Use the supplied Personal computer connection cable and the supplied conversion adapter for Mac. Connecting to Computer Devices (Cont.) • Desktop type Connecting t[...]

24 Connecting to V arious Devices (Cont.) After all devices have finished being connected, connect the projector ’s power cord. At this time, do not turn on the MAIN POWER switch yet. Power cord (supplied) Lens cap CAUTION T o prevent fire and electric shock, observe the following: • When you do not use devices, pull out their power cords from [...]

25 ENGLISH When T urning On the Devices Connected to the Projector T urn on the switches of the projector and the devices connected in the following order . Skip over unconnected devices if there is any . Power switch of the monitor of the computer which provides input to the projector Peripheral devices of the computer which provides input to the [...]

26 Basic Operations ■ Projector ’ s buttons ■ Remote control unit MAIN POWER switch The following describes the basic procedure for normal use of the projector . 1 T urn on the MAIN POWER switch. ON [ ❙ ]: The main power turns on and the ST AND BY indicator comes on. Projector ’s indicator 2 Press the OPERA TE button for one second or mor[...]

27 ENGLISH ■ Remote control unit Basic Operations (Cont.) ■ Projector ’ s buttons 2. Select the video input to be projected Remote control unit Projector Line display * When the input is switched, the line display (ex. VIDEO) and the source display (ex. NTSC(480i)) are shown on the upper part of the screen (they disappear in about five second[...]

28 Basic Operations (Cont.) 4. Adjust focus ■ Adjust focus with the remote control’ s FOCUS (+/–) buttons. ■ T o focus on farther points: Press the FOCUS (+) button. ■ T o focus on nearer points: Press the FOCUS (–) button. Remote control unit Note • Focus adjustment can also be made on the setting menu. For operating the setting menu[...]

29 ENGLISH OPERATE VOL. PAGE BACK PRESET ZOOM FOCUS COMPUTER VIDEO QUICK ALIGN. AV MUTING W T MENU/ENTER Basic Operations (Cont.) ¶ For Operating Other Functions ■ T o turn off video image and audio sound temporarily Press the A V MUTING button. ■ Press once: Video image and audio sound turn of f (do not come out). ■ Press again: Video image[...]

30 OPERATE VOL. PAGE BACK PRESET ZOOM FOCUS COMPUTER VIDEO QUICK ALIGN. AV MUTING W T MENU/ENTER Basic Operations (Cont.) ■ T o display the MAIN menu The main menu is used to adjust or set the projected video picture and the projector ’s condition, etc. (PIXEL CLOCK, POSITION, PICTURE, SOUND, OPTIONS, SOURCE, CHANNEL, USER SOURCE SETUP , DISPLA[...]

31 ENGLISH OPERATE VOL. PAGE BACK PRESET ZOOM FOCUS COMPUTER VIDEO QUICK ALIGN. AV MUTING W T MENU/ENTER ■ Remote control unit P AGE BACK button Basic Operations (Cont.) ■ T o display “CHANNEL” When no menu is displayed, pressing P AGE BACK button will show the channel now being used on the upper right corner of the screen. Also, the channe[...]

32 SETTING TRACKING PHASE H.POS. V.POS. FOCUS – ZOOM W AUDIO -VOL. 0 0 0 0 + T 0 Operating the Setting Menu Making Basic Settings ■ Projector ’ s buttons SETTING button QUICK ALIGN. buttons ■ Setting menu Description of adjustment and setting items TRACKING : If wide vertical stripes appear on the screen, adjust the lateral video size and d[...]

33 ENGLISH Operating the Main Menu Configuration the Main Menu (A V Input) For computer inputs, see the following page. Y ou can adjust video quality (PICTURE), audio quality (SOUND), etc. using the menus. The menus are configured as follows: Main menu (A V inputs : During A V IN input signal) PIXEL CLOCK TRACKING : Normally , no adjustment is requ[...]

34 Operating the Main Menu (Cont.) Configuration of the Main Menu (Computer-related input) Main menu (Computer-related inputs : During COMPUTER IN-1 or -2 input signal) PIXEL CLOCK TRACKING : The lateral size and display area of video image are adjusted. PHASE : Flickering or dim video image is adjusted. POSITION V . POS. : The vertical position of[...]

35 ENGLISH OPERATE VOL. PAGE BACK PRESET ZOOM FOCUS COMPUTER VIDEO QUICK ALIGN. AV MUTING W T MENU/ENTER MENU/ENTER button Cursor buttons PAGE BACK button Operating the Main Menu (Cont.) Operating the Main Menu (Basic Operation of the Main Menu) Submenu items Input line Source Decoder (color system) Language For projector ’s menus, the setting me[...]

36 OPERATE VOL. PAGE BACK PRESET ZOOM FOCUS COMPUTER VIDEO QUICK ALIGN. AV MUTING W T MENU/ENTER MENU/ENTER button Cursor buttons PAGE BACK button Operating the Main Menu (Cont.) Changing the Color System Color system (DECODER) display AUTO is set for the color system when the projector is shipped from the factory . Normally , use it in AUT O. If o[...]

37 ENGLISH OPERATE VOL. PAGE BACK PRESET ZOOM FOCUS COMPUTER VIDEO QUICK ALIGN. AV MUTING W T MENU/ENTER MENU/ENTER button Cursor buttons PAGE BACK button Operating the Main Menu (Cont.) Changing the Language Display Language display The language in the menu display is set to English when shipped from the factory . When you want to change to anothe[...]

38 OPERATE VOL. PAGE BACK PRESET ZOOM FOCUS COMPUTER VIDEO QUICK ALIGN. AV MUTING W T MENU/ENTER MENU/ENTER button Cursor buttons PAGE BACK button Operating the Main Menu (Cont.) Adjusting the Pixel Clock Submenu item (PIXEL CLOCK) The pixel clock should be adjusted mainly for computer-related inputs. (Normally , it does not need to be adjusted for[...]

39 ENGLISH OPERATE VOL. PAGE BACK PRESET ZOOM FOCUS COMPUTER VIDEO QUICK ALIGN. AV MUTING W T MENU/ENTER MENU/ENTER button Cursor buttons PAGE BACK button Adjusting the Screen Position Submenu item (POSITION) Adjust the position of the screen if it is displaced. 1 Press the MENU/ENTER button. • The main menu appears on the screen. 2 Select “POS[...]

40 OPERATE VOL. PAGE BACK PRESET ZOOM FOCUS COMPUTER VIDEO QUICK ALIGN. AV MUTING W T MENU/ENTER MENU/ENTER button Cursor buttons PAGE BACK button Operating the Main Menu (Cont.) Adjusting Picture Quality Submenu item (PICTURE) Adjust brightness, contrast, etc. so you have the desired screen. Adjustment items (on the PICTURE menu) are different whe[...]

41 ENGLISH OPERATE VOL. PAGE BACK PRESET ZOOM FOCUS COMPUTER VIDEO QUICK ALIGN. AV MUTING W T MENU/ENTER MENU/ENTER button Cursor buttons PAGE BACK button Adjusting Picture Quality (Cont.) Operating the Main Menu (Cont.) 5 Make adjustment with the cursor button 2 or 3 . ■ For video system input • T o adjust multiple items, repeat steps 4 and 5.[...]

42 OPERATE VOL. PAGE BACK PRESET ZOOM FOCUS COMPUTER VIDEO QUICK ALIGN. AV MUTING W T MENU/ENTER MENU/ENTER button Cursor buttons PAGE BACK button Operating the Main Menu (Cont.) Adjusting Picture Quality (Cont.) Gets darker . (–30 ← 0 ← +30) Gets brighter . (–30 → 0 → +30) Gets lower . (–30 ← 0 ← +30) Gets higher . (–30 → 0 ?[...]

43 ENGLISH OPERATE VOL. PAGE BACK PRESET ZOOM FOCUS COMPUTER VIDEO QUICK ALIGN. AV MUTING W T MENU/ENTER MENU/ENTER button Cursor buttons PAGE BACK button Operating the Main Menu (Cont.) Adjusting Sound Quality Submenu item (SOUND) Adjust the quality (treble/bass) of sound. 1 Press the MENU/ENTER button. • The main menu appears on the screen. 2 S[...]

44 OPERATE VOL. PAGE BACK PRESET ZOOM FOCUS COMPUTER VIDEO QUICK ALIGN. AV MUTING W T MENU/ENTER MENU/ENTER button Cursor buttons PAGE BACK button Operating the Main Menu (Cont.) Submenu item (OPTIONS) Setting and Adjusting Other Functions (OPTIONS) The following optional functions can be set (adjusted). • MENU AUTO OFF • LINE DISPLA Y • RIGH[...]

45 ENGLISH OPERATE VOL. PAGE BACK PRESET ZOOM FOCUS COMPUTER VIDEO QUICK ALIGN. AV MUTING W T MENU/ENTER MENU/ENTER button Cursor buttons PAGE BACK button Operating the Main Menu (Cont.) Setting and Adjusting Other Functions (OPTIONS) (Cont.) Notes • The selected item is shown in magenta color. Items shown in gray color cannot be operated or set [...]

46 OPERATE VOL. PAGE BACK PRESET ZOOM FOCUS COMPUTER VIDEO QUICK ALIGN. AV MUTING W T MENU/ENTER MENU/ENTER button Cursor buttons PAGE BACK button Operating the Main Menu (Cont.) Notes • The selected item is shown in magenta color . Items shown in gray color cannot be operated or set in the current mode. • Items to be set (adjusted) are differe[...]

47 ENGLISH OPERATE VOL. PAGE BACK PRESET ZOOM FOCUS COMPUTER VIDEO QUICK ALIGN. AV MUTING W T MENU/ENTER MENU/ENTER button Cursor buttons PAGE BACK button Changing (Setting) the Source Submenu item [SOURCE] Normally , use the source setting in AUTO. If use in AUTO is unstable such as color not appearing, the screen being disturbed or the screen bei[...]

48 OPERATE VOL. PAGE BACK PRESET ZOOM FOCUS COMPUTER VIDEO QUICK ALIGN. AV MUTING W T MENU/ENTER MENU/ENTER button Cursor buttons PAGE BACK button Operating the Main Menu (Cont.) Changing (Setting) the Source (Cont.) 5 Press the MENU/ENTER button to set (fix) it. ■ When AUT O is selected: The main menu is automatically cleared, completing the set[...]

49 ENGLISH Setting Up Channels Operating the Main Menu (Cont.) OPERATE VOL. PAGE BACK PRESET ZOOM FOCUS COMPUTER VIDEO QUICK ALIGN. AV MUTING W T MENU/ENTER MENU/ENTER button Cursor buttons PAGE BACK button Submenu item [CHANNEL] ■ Remote control unit ■ Main menu Notes • The selected item is shown in magenta color. Items shown in gray color c[...]

50 Operating the Main Menu (Cont.) Setting Up Channels (Cont.) OPERATE VOL. PAGE BACK PRESET ZOOM FOCUS COMPUTER VIDEO QUICK ALIGN. AV MUTING W T MENU/ENTER MENU/ENTER button Cursor buttons PAGE BACK button ■ Remote control unit 5 Press the MENU/ENTER button to set (fix). • The “LINE selection menu” is shown on the screen. 6 Press the curso[...]

51 ENGLISH Setting Up Channels (Cont.) Operating the Main Menu (Cont.) OPERATE VOL. PAGE BACK PRESET ZOOM FOCUS COMPUTER VIDEO QUICK ALIGN. AV MUTING W T MENU/ENTER MENU/ENTER button Cursor buttons PAGE BACK button ■ Remote control unit ■ CHANNEL setup menu Notes • The selected item is shown in magenta color. Items shown in gray color cannot [...]

52 Operating the Main Menu (Cont.) Setting Up Channels (Cont.) OPERATE VOL. PAGE BACK PRESET ZOOM FOCUS COMPUTER VIDEO QUICK ALIGN. AV MUTING W T MENU/ENTER MENU/ENTER button Cursor buttons PAGE BACK button ■ Remote control unit 2. Press the MENU/ENTER button to set. • When the item is set, a check mark is placed next to its user name, which is[...]

53 ENGLISH Setting Up Channels (Cont.) Operating the Main Menu (Cont.) OPERATE VOL. PAGE BACK PRESET ZOOM FOCUS COMPUTER VIDEO QUICK ALIGN. AV MUTING W T MENU/ENTER MENU/ENTER button Cursor buttons PAGE BACK button ■ Remote control unit ■ CHANNEL setup menu Notes • The selected item is shown in magenta color. Items shown in gray color cannot [...]

54 Operating the Main Menu (Cont.) Changing Channels OPERATE VOL. PAGE BACK PRESET ZOOM FOCUS COMPUTER VIDEO QUICK ALIGN. AV MUTING W T MENU/ENTER MENU/ENTER button Cursor buttons PAGE BACK button ■ Remote control unit Y ou can changing channels where lines and sources have been set up. The channels can be switched by using either a “direct cha[...]

55 ENGLISH Changing Channels (Cont.) Operating the Main Menu (Cont.) OPERATE VOL. PAGE BACK PRESET ZOOM FOCUS COMPUTER VIDEO QUICK ALIGN. AV MUTING W T MENU/ENTER MENU/ENTER button Cursor buttons PAGE BACK button ■ Remote control unit ■ Changing channels on the “CHANNEL Setup/ Selection” menu : 1 Press the MENU/ENTER button. • The main me[...]

56 Operating the Main Menu (Cont.) Setting up (or Change) User Sources OPERATE VOL. PAGE BACK PRESET ZOOM FOCUS COMPUTER VIDEO QUICK ALIGN. AV MUTING W T MENU/ENTER MENU/ENTER button Cursor buttons PAGE BACK button ■ Main menu ■ Remote control unit Submenu item [USER SOURCE SETUP] AUTO COMP1 SXGA1 PIXEL CLOCK POSITION PICTURE SOUND OPTIONS SOUR[...]

57 ENGLISH Operating the Main Menu (Cont.) Setting up (or Change) User Sources (Cont.) OPERATE VOL. PAGE BACK PRESET ZOOM FOCUS COMPUTER VIDEO QUICK ALIGN. AV MUTING W T MENU/ENTER MENU/ENTER button Cursor buttons PAGE BACK button ■ Main menu ■ Remote control unit Submenu item [USER SOURCE SETUP] AUTO COMP1 SXGA1 PIXEL CLOCK POSITION PICTURE SO[...]

58 Operating the Main Menu (Cont.) Setting up (or Change) User Sources (Cont.) OPERATE VOL. PAGE BACK PRESET ZOOM FOCUS COMPUTER VIDEO QUICK ALIGN. AV MUTING W T MENU/ENTER MENU/ENTER button Cursor buttons PAGE BACK button ■ Main menu ■ Remote control unit Submenu item [USER SOURCE SETUP] AUTO COMP1 SXGA1 PIXEL CLOCK POSITION PICTURE SOUND OPTI[...]

59 ENGLISH Operating the Main Menu (Cont.) Setting up or Changing the Display Size OPERATE VOL. PAGE BACK PRESET ZOOM FOCUS COMPUTER VIDEO QUICK ALIGN. AV MUTING W T MENU/ENTER MENU/ENTER button Cursor buttons PAGE BACK button ■ Main menu ■ Remote control unit Submenu item [DISPLA Y SIZE] AUTO COMP1 SXGA1 PIXEL CLOCK POSITION PICTURE SOUND OPTI[...]

60 Replacing the Fuse A fuse is used to protect the power source of the projector . If the fuse is burned out, replace it. When the power switch is turned on but no power is supplied to the projector , check the fuse. When replacing the fuse, obtain the same type of fuse rated 15A/250V . If there are any unclear points, contact the dealer where you[...]

61 ENGLISH Replacing the Light-Source Lamp The light-source lamp has its service life. It is approximately 1000 hours. When the light-source lamp approaches the end of its service life, its degradation progresses rapidly . When the lamp’s used hours exceed 900 hours, the projector ’s LAMP indicator comes on. Also, at the start of projection (la[...]

62 2 Loosen the lamp-unit screws, raise the handle, and pull out the lamp unit. Loosen the two screws with a flat-end screwdriver . Screw Lamp unit Handle Lamp unit Handle Screw Lamp-replacement opening cover Be careful not to damage the claw . 3 Insert the new lamp unit fully inside and fasten the screws. Fasten the two screws with a flat-end scre[...]

63 ENGLISH Replacing the Light-source Lamp (Cont.) Resetting the Lamp Use T ime After replacing with a new light-source lamp, reset the counter inside the projector . This works to reset the life calculation of the light-source lamp, allowing the used time of the new light-source lamp to be accumulated. 1 T urn on the MAIN POWER switch to go into s[...]

64 Cleaning and Replacing the Filter Clean the filter periodically . If the filter is heavily stained and does not get clean, or if it is damaged, replace the filter with a new filter (part No.: LC30208). Otherwise, dirt may get inside and appear on the screen, possibly preventing you from enjoying the video image fully . If dirt gets inside or if [...]

65 ENGLISH T roubleshooting Solutions to common problems related to your projector are described here. If none of the solutions presented here solves the problem, unplug the projector and consult a authorized dealer or service center . Symptom Probable cause Corrective action Page Power is not supplied. Light is not emitted, or light level is low .[...]

66 * This projector is equipped with a microcomputer that may operate abnormally due to interference from external components. If this happens, turn off the main power and disconnect the power cord from the wall AC outlet. Then reconnect the power cord to AC outlet and turn on the main power again. (For the turning on and off the power , see pages [...]

67 ENGLISH Specifications Optical mechanism system • Projection method 3D-ILA device, 1 lens, 3 primary color optical shutter method • D-ILA device 0.9" (2.3cm) measured diagonally (1365 pixels × 1024 pixels) × 3 (T otal number of pixels : 4,193,280) • Projecting lens Electric-driven zoom of 1.5 × • Screen size Approx.42" (107c[...]

68 Horizontal sync/composite sync signal (H/Cs) H : 1V(p-p) to 5V(p-p), high impedance (positive/negative polarity) Cs : 1V(p-p) to 5V(p-p), high impedance (positive/negative polarity) V ertical sync signal (V) V : 1V(p-p) to 5V(p-p), high impedance (positive/negative polarity) * Some connected devices may not correspond to composite sync (Cs) or G[...]

69 ENGLISH Specifications (Cont.) Outside dimensions ■ To p ■ Front ■ Side 20 (505)* 1 5- 1 / 4 (133)* 1 ( φ 102) 14- 1 / 2 (367) 15- 3 / 8 (388) 20 (505)* 1 15- 1 / 2 (392) 15- 5 / 8 (388) 10- 1 / 8 (256) 2- 5 / 8 (68) 8- 1 / 8 (204) 10- 1 / 2 (264) Unit: Inch (mm) *1: Protrusion excluded φ 4- 1 / 8 DTV -format signals * The following are [...]

70 ■ RS-232C terminal ■ COMPUTER IN-1 (PC) / COMPUTER OUT T erminal Pin number Signal name 1 N/C 2R D 3T D 4 N/C 5 GND Pin number Signal name 6 N/C 7 N/C 8 N/C 9 N/C Pin number Signal name 1 Red 2 Green 3 Blue 4 N/C 5 N/C 6 GND (Red) 7 GND (Green) 8 GND (Blue) Pin number Signal name 9 N/C 10 GND (SYNC) 1 1 GND 12 N/C 13 H.SYNC 14 V .SYNC 15 N/C[...]

G2000 Cover(A4) 99.11.19, 10:42 PM 1[...]

G2000 DIGIT AL GRAPHICS PROJECT OR Printed in Japan LCT0674-001A 1 199-K-M-Ni Confidential and proprietary information. © Copyright 1999 by Hughes-JVC T echnology Corporation. All worldwide rights r eserved. This manual was produced by Hughes-JVC T echnology Corporation and may be revised without prior notice. No par t of this manual may be r epro[...]