JVC InteriArt HV-28P37SJE manuale d’uso

HV-32/28P37SJE / LCT1452-001A -U / All Cover Cover01 COLOUR TELEVISION INSTRUCTIONS HV-32P37SJE HV-28P37SJE HV-32P37SJE_Eng.book Page 1 Wednesday, September 3, 2003 8:05 PM[...]

2 HV-32/28P37SJE / LCT1452-001A-U / ENGL ISH  Warning DO NOT cut off the mains plug from this equipment. If the plug fitted is not suitable for the power points in your home or the cable is too short to reach a power point, then obtain an appropriate safety approved extension lead or adaptor or consult your dealer. If nonetheless the mains plug [...]

3 HV-32/28P37SJE / LCT1452-001A-U / ENGL ISH Thank you for buying this JVC colour television. To make sure you understand how to use your new TV, please read this manual thoroughly before you begin. Avoid improper installation and never put the unit where good ventilation is not possible. When installing this TV, distance recommendations must be ma[...]

4 HV-32/28P37SJE / LCT1452-001A-U / CONTENTS Setting up your TV ............. .............. ........5 Connecting the aerial and video cassette recorder ( VCR) .............. ............. ............ 5 Connecting the power cord to the AC outlet... ............. .............. ............. ............ 6 Putting the batteri es into the Remote con[...]

5 HV-32/28P37SJE / LCT1452-001A-U / ENGL ISH Setting up your TV Caution • Turn off all the equipment includi ng the TV before connecting anything. Connecting the aerial and video cassette recorder (VCR) • The connecting cables are not provided. • For further details, refer to th e manuals provided with the devices to be connected.  If you [...]

6 Setting up your TV HV-32/28P37SJE / LCT1452-001A-U / ENGL ISH  Rear Panel 1 Aerial socket (page 5) 2 EXT-1 terminal (pages 5, 36, 39) 3 EXT-2 terminal (pages 5, 10, 36, 39) 4 EXT-3 terminal (pages 36, 39) 5 EXT-4 terminal (pages 36, 39) 6 AUDIO OUT terminal (page 40) Connecting the power cord to the AC outlet Caution • Operate only from the [...]

Setting up your TV 7 HV-32/28P37SJE / LCT1452-001A-U / ENGL ISH • If the JVC logo does not appear this is because your TV has already been turned on for the first time: use the “LANGUAGE” and “AUTO PROGRAM” functions to make the initial settings. For details, see “SET UP menu” on page 30. 2 Press the a button The LANGUAGE menu appears[...]

8 Setting up your TV HV-32/28P37SJE / LCT1452-001A-U / ENGL ISH 6 Press the a a a a button to display the T-V LINK menu If you do no t have a T-V L INK compatible VCR connected: Press the b button to exit the T-V LINK menu. The T-V LINK menu disappears. If you have a T-V LINK compa tible VCR connected to the EXT-2 terminal: Follow the operating pro[...]

Setting up your TV 9 HV-32/28P37SJE / LCT1452-001A-U / ENGL ISH • If you have any questions about the items in the Broadcast Selection menu or how to operate the menu, please contact your cable TV station. • If you don’t want to use the ACI function, press the 6 buttons to choose ACI SKIP and then press a . • When the cable TV broadcast rec[...]

10 Setting up your TV HV-32/28P37SJE / LCT1452-001A-U / ENGL ISH T-V LINK functions When you have a T-V LINK compatible VCR connected to the EXT-2 Terminal on the TV, it is easier to set up the VCR and to view videos. T-V LINK uses the following features: To use T-V LINK func tions: A “T-V LINK compatible VCR” means a JVC video cassette r ecord[...]

11 HV-32/28P37SJE / LCT1452-001A-U / ENGL ISH TV buttons and functions Refer to the pages in brackets for details. 1 Remote contro l sensor 2 Power lamp (pages 6, 11) 3 Main power button (pages 6, 11) 4 Headphone jack (mini jack) (page 39) 5 P p buttons/ q buttons (page 11) 6 r (Volume) button (page 11) 7 EXT-5 terminal (pages 36, 39) Turn the main[...]

12 HV-32/28P37SJE / LCT1452-001A-U / ENGL ISH Remote control buttons and functions 1 Muting button 2 Number butt ons 3 Information button 4 c button 5 3 sound button 6 b button 7 7 buttons 8 g (Text) button 9 p p buttons 0 VCR/DVD/Teletext control buttons - p buttons = # (Standby) button ~ VCR/TV/DVD switch ! G button @ Colour button # X (Multi) bu[...]

Remote control buttons and functions 13 HV-32/28P37SJE / LCT1452-001A-U / ENGL ISH Choose a TV channel and watch images from external devices • If the pictu re is tilted, c orrect it. S ee “PICTURE TILT” on page 35.  Use the number buttons: Enter the programme number (PR) of the channe l using the number buttons. Example: •P R 6 → pres[...]

14 Remote control b uttons and functions HV-32/28P37SJE / LCT1452-001A-U / ENGL ISH Adjust the volume Press the r r r r q q q q buttons to adjust the volume. The Volume indicator appears and the volume changes as you press the r q buttons.  Muting the sound Press the l l l l (muting) button to turn off the sound. Pressing the l (muting) button a[...]

Remote control buttons and functions 15 HV-32/28P37SJE / LCT1452-001A-U / ENGL ISH ZOOM function You can change the screen size according to the picture aspect ratio. Choose the optimum one from the following ZOOM modes. AUTO: When a WSS (Wide Screen S ignalling) signal, which shows the aspect ratio of the picture, is included in the broadcast sign[...]

16 Remote control b uttons and functions HV-32/28P37SJE / LCT1452-001A-U / ENGL ISH  Adjustin g the visible are a of the picture If subtitles or the top (or bottom) of the picture are cut off, you can adjust the visible area of the picture manually. 1 Press the c button The ZOOM menu appears. 2 Press the a button to display the ZOOM mode indicat[...]

Remote control buttons and functions 17 HV-32/28P37SJE / LCT1452-001A-U / ENGL ISH To cancel the FREEZE function: Press the f button, the p p buttons or the number buttons. • The FREEZE function does not work while a sub-picture is displayed. • The still picture cannot be output from the TV. • The FREEZE function does not work for pictures of[...]

18 Remote control b uttons and functions HV-32/28P37SJE / LCT1452-001A-U / ENGL ISH - The pictures cannot be swapped when a picture of 625p or 525p signal from EXT-4 is being displayed as the main picture. • Do not press the g (swap) butto n while you are recording the TV output on the VCR. If you do, the TV output signal will change. • You can[...]

19 HV-32/28P37SJE / LCT1452-001A-U / ENGL ISH Teletext function Basic operation You can view three types of teletext broadcasts on the TV: FLOF (Fastext), TOP and WST. • TOP is not available when the COUNTRY setting is UNITED KINGDOM. 1 Choose a TV chan nel with a teletext broadcast 2 Set the VCR/TV/DVD swit ch to the TV position 3 Press g g g g [...]

20 Teletext functi on HV-32/28P37SJE / LCT1452-001A-U / ENGL ISH 3 Press and hold down the A A A A (Store) button The four page numbers blink white to show that they are stored in memory.  To call up a stored page: 1 Press the B B B B button to enter the List mode 2 Press a colour button having a stored page To exit the List mode: Press the B bu[...]

Teletext function 21 HV-32/28P37SJE / LCT1452-001A-U / ENGL ISH Cancel You can search for a teletext page while watching TV. 1 Press the number button to enter a page numb er, or press a c olour button The TV searches for a teletext page. 2 Press H H H H (Cancel) button The TV programme appears. When the TV finds the teletext page, its page number [...]

22 HV-32/28P37SJE / LCT1452-001A-U / ENGL ISH Using the TV’s menu This TV has a number of functions you can operate using menus. To use all your TV’ s functions, you need to understan d the basic menu operating techniques fully. Buttons used to operate the menus Basic operation 1 Press the H H H H button to display the menu bar 2 Press the 5 5 [...]

23 HV-32/28P37SJE / LCT1452-001A-U / ENGL ISH PICTURE menu • While the PICTURE menu is d isplayed, pressing the blue button will set the CONTRAST, BRIGHT, SHARP, COLOUR, HUE settings to their default settings. PICTURE MODE You can choose one of three PICTURE MODEs to adjust the picture settings automatically. BRIGHT: Heightens contrast and sharpn[...]

24 PICTURE menu HV-32/28P37SJE / LCT1452-001A-U / ENGL ISH FEATURES Choose FEATURES and press the a or 3 button to display the sub-menu.  DIGITAL VNR The DIGITAL VNR function cuts down the amount of ‘noise’ (‘snow’ or interference) in the original pict ure. You can choose from the three DIGITAL VNR function settings of AUTO, MIN and MAX.[...]

PICTURE menu 25 HV-32/28P37SJE / LCT1452-001A-U / ENGL ISH MIN: The level of DigiPure effect is set to the minimum. When you set the Supe r DigiPure function to AUTO and notice some noise, change the setting from AUTO to MIN. • The MIN setting is not suitable for high- quality pictures which contain very little noise. MAX: The level of DigiPure e[...]

26 PICTURE menu HV-32/28P37SJE / LCT1452-001A-U / ENGL ISH AUTO: This function detects a colour system from the input signal. You can only use this when you are viewing a picture from programme number PR 0 (AV), or an EXT terminal. • The AUTO function may not function properly if you have poor signal quality. If the picture is abnormal in th e AU[...]

27 HV-32/28P37SJE / LCT1452-001A-U / ENGL ISH SOUND menu • Functions in the “SOUND” menu other than “HEADPHONE VOLUME” work for the TV speakers. They do not work for the sound from the headphones. • When the headphones are connected and only one screen is displayed, only “HEADPHONE VOLUME” can be used. STEREO / I • II When you are[...]

28 HV-32/28P37SJE / LCT1452-001A-U / ENGL ISH FEATURES menu SLEEP TIMER You can set the TV to automatically turn off after a specified period of time. 1 Choose SLEEP TIMER. Then press the a a a a or 3 3 3 3 button A Sub-menu of the SLEEP TIMER function appears. 2 Press the 5 5 5 5 buttons to set the period of time. Then pres s the a a a a button Yo[...]

FEATURES menu 29 HV-32/28P37SJE / LCT1452-001A-U / ENGL ISH 4 Press the 6 6 6 6 buttons to choose a TV channel Every time you press the 6 buttons, the Programme number (PR) changes, and the picture of the TV channel registered in the Programme number (PR) is displayed on the screen. 5 Press the blue button and set the CHILD LOCK function. Then pres[...]

30 HV-32/28P37SJE / LCT1452-001A-U / ENGL ISH SET UP menu AUTO PROGRAM The AUTO PROGRAM function TV channel automatic registration which was performed in the “Initial settings” ( page 6) can be preformed again. To receive SKY 1 you need a satellite tuner. You must have the satellite tuner set to SKY 1 before starting the AUTO PROGRAM function. [...]

SET UP menu 31 HV-32/28P37SJE / LCT1452-001A-U / ENGL ISH  Basic operation 1 Choose EDIT/MANUAL, then press the a a a a or 3 3 3 3 button The EDIT menu appears. 2 Follow the descriptio n for a function you want to use 3 Press the a a a a button to complete the settings The T-V LINK menu appears. If you do no t have a T-V L INK compatible VCR con[...]

32 SET UP menu HV-32/28P37SJE / LCT1452-001A-U / ENGL ISH  DELETE 1 Press the 6 6 6 6 buttons to choose a TV channel Every time you press the 6 buttons, the programme number (PR) changes and the picture of the TV channel stored in the programme number (PR) appears on the screen. 2 Press the yellow button to delete the TV channel The TV channel i[...]

SET UP menu 33 HV-32/28P37SJE / LCT1452-001A-U / ENGL ISH • When the COUNTRY setting is not FRANCE, use a two-digit CH/CC number. When the COUNTRY setting is FRANCE, use a three-digit CH/CC number.  INSERT 1 Press the 6 6 6 6 buttons to choose a programme number (PR) for which you will regis ter a new TV channe l 2 Press the gre en button and [...]

34 SET UP menu HV-32/28P37SJE / LCT1452-001A-U / ENGL ISH 5 Press the green or red button repeatedly until the TV channel you want appears If the TV channel reception is poor: Press the blue or yellow button to fine- tune the TV channel. 6 Press the a a a a button and regis ter the TV channel to a Programme number (PR) The normal EDIT menu is resum[...]

SET UP menu 35 HV-32/28P37SJE / LCT1452-001A-U / ENGL ISH LANGUAGE The LANGUAGE setting which was performed in the “Initial settings” ( page 6) can be changed. 1 Choose LANGUAGE, th en press the a a a a or 3 3 3 3 button A sub-menu of the LANGUAGE function appears. 2 Press the 5 5 5 5 and 6 6 6 6 buttons to choose a langua ge. Then press the a [...]

36 SET UP menu HV-32/28P37SJE / LCT1452-001A-U / ENGL ISH 6 Turn on the VCR, and then press the a a a a button to transmit the data to VCR The T-V LINKmenu disappears once the data transmission ends. 7 If you have anoth er TV channel capable of being uns crambled with a Decoder, repe at steps 2 through 6 If the DECODER (EXT-2) function has been set[...]

SET UP menu 37 HV-32/28P37SJE / LCT1452-001A-U / ENGL ISH 1 Press the 5 5 5 5 or 6 6 6 6 buttons to choose an EXT te rminal 2 Press the yellow button and set the S-IN (S-VIDEO input). Then pres s the a a a a button An S-IN (S-VIDEO input) mark is displayed. You can view an S-VIDEO signal (Y/C signal) instead of the regular video signal (composite s[...]

38 SET UP menu HV-32/28P37SJE / LCT1452-001A-U / ENGL ISH  DUBBING You can choose a signal source to be output from the EXT-2 terminal. You can do this with the output signals of th e devices connected to other EXT terminals, or with the picture and sound from a TV channel you are currently viewing. 1 Press the 5 5 5 5 buttons to choose the arro[...]

39 HV-32/28P37SJE / LCT1452-001A-U / ENGL ISH Additional preparation Connecting external equipment Connect the equipment to the TV, making the correct rear panel and front panel connections. Before connectin g anything: • Read the manuals that cam e with the equipment. Depending on the equipment, the connection method may be differen t from the d[...]

40 Additional preparation HV-32/28P37SJE / LCT1452-001A-U / ENGL ISH  Equipment which can output the S-VIDEO signal (Y/C signal) such as an S-V HS VCR Connect the equipment to an EXT terminal (but not the EXT-1 terminal). You can choose between an S-VIDEO signal (Y/C signal) and a regular video signal (composite signal). For details of how to op[...]

41 HV-32/28P37SJE / LCT1452-001A-U / ENGL ISH Troubleshooting If a problem arises while you are using the TV, please read this troubleshooting guide carefully before you ask to have the TV repaired. You may be able to fix it easily by yourself. For example, if the mains plug is disconnected from the mains outlet, or the TV aerial has problems, you [...]

42 Troubleshooti ng HV-32/28P37SJE / LCT1452-001A-U / ENGL ISH • When viewing images from commercially available video software products, or videos from videotapes which have been recorded improperly, the top of the image may be distorted. This is due to the condition of the video signal. There is nothing wrong with the TV. • Since this TV is d[...]

43 HV-32/28P37SJE / LCT1452-001A-U / ENGL ISH Specifications We may change the design and specific ations without notice. Pictures displayed on the screen using this TV’s ZOOM functions should not be shown fo r any commercial or demonstration purpose in public places (cafes, hotels, etc.) without the consent of the owners of copyright of the orig[...]

© 2003 VICTOR COMPANY OF JAPAN, LIMITED HV-32/28P37SJE / LCT1452-001A -U / All Cover Cover04 LCT1452-00 1A-U 0903-T-CR-JMU K HV-32P37SJE_Eng.book Page 1 Wednesday, September 3, 2003 8:05 PM[...]