JVC LT-17C50BJ manuale d’uso

1004MKH-VT -VT ©2004 VICTOR COMP ANY OF JAP AN, LIMITED 500 5807 3 L T -17C50BJ WIDE LCD P ANEL TV INSTRUCTIONS ENGLISH D:Aldus Page Maker OnemliIB-NEWJVCAk-452835 (16-9)3D-(AV28-GT20U)COVER PAGE-2835-AK45-1512UK-16-9-(AV-28GT20U)-50053856.cdr 19 Ekim 2004 Sal 10:24:11 Color profile: Disabled Composite Default screen[...]

- 1 - For your safety This equipment has been designed and manufactured to meet international safety stan- dards but, like any electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured. So, please read the points below for your own safety . They are of a general nature, intended to help you with all [...]

- 2 - DO DO read the operating instructions before you attempt to use the equipment. DO ensure that all electrical connections (in- cluding the mains plug, extension leads and inter-connections between pieces of equip- ment) are properly made and in accordance with the manufacturers instructions. Switch off and withdraw the mains plug be- for[...]

- 3 - W ARNING  Fingers may be trapped under the TV causing injuries. Hold the TV at the bottom in the middle, and do not allow it to tilt up or down.  The TV may fall causing injuries. Hold the bottom of the stand with your hand and tilt the TV up and down.  Do not allow children to hang from the TV , place their el- bows on the TV or lea[...]

- 4 - Import ant Information Please take note EXCLUSION CLAUSE JVC shall under no circumstances be liable for loss and/or damage to the product caused by:  fire;  earthquake;  accidental damage;  intentional misuse of the product;  use of the product in improper conditions;  loss and/or damage caused to the product whilst in the p[...]

- 5 - Remote Control Buttons / I = (St and By) button TV / VCR / DVD Switch Number buttons A V button (TV , EXT -1, EXT -2, EXT-2 S, EXT -3, EXT -4, EXT -4 S or PC) BLUE / PICTURE Mode button YELLOW / Sleep Timer button MENU button = Cursor Up button OK button = Cursor Right button BACK button = V olume + / - buttons T eletext / VCR /DVD Control bu[...]

- 6 - Control Panel Buttons With certain combinations of connectors and leads the back cover may not be easily fitted. If the cover is left off, this in no way infringes safety requirements. JVC LT-17C50BJ-50058073.p65 19.10.2004, 08:40 6[...]

- 7 - Using the stand This TV comes with a T able T op St and already attached. This stand can be used to adjust the direction of the TV screen 5° up, 10° down, and 20° to the left or right. Tilt the TV up and down: While holding the bottom of the stand with one hand, use your other hand to hold the middle of the top of the TV and slowly tilt th[...]

- 8 - Remove the terminal Cover There are connection terminals behind the covers of the rear of the TV . Remove the cover before connecting an antenna, DVD or VCR. Remove the covers by removing the hooks. When replacing the covers, place the side or bottom of the covers against the TV and insert the hooks.  Leave the covers off if they do not fi[...]

- 9 - Where to install Locate the TV away from direct sunlight and strong lights, soft, indirect lighting is recommended for comfortable viewing. Place on a sturdy platform, the mounting surface should be flat and steady , it should then be secured to the wall with a sturdy tie using the hook on the back of the TV , this will prevent it from fallin[...]

- 10 - Preparation Install Display on solid horizontal surface such as a table or desk. For ventilation, leave a space of at least 10 cm free all around the set. T o prevent any fault and unsafe situations, please do not place any objects on top of the set. Features  It is a remote controlled colour television and PC monitor .  100 programmes[...]

- 11 - Connections to the RF input socket  Connect the aerial or cable TV plug to the RF input socket located at the back of the TV and connect the cable plug coming out from the TV out socket located at the devices (VCR, DVB etc.) to this socket as well. How to connect other devices IMPORT A NT : Switch off the TV before connect- ing any extern[...]

- 12 - Operating the TV You can operate your TV both using the re- mote control handset and onset buttons. First A.P.S. (Automatic Programming System) APS, searches and sorts all channels and stores them automatically on your TV , accord- ing to the transmission of programme sys- tems in your area. T o cancel APS before starting, press BLUE button.[...]

- 13 - download was not performed correctly . Before trying to download again, check that:  The VCR power is turned on.  The VCR is T -V LINK compatible.  The VCR is connected to the Ext-2.  The scart cable is fully wired. Direct REC: Y ou can easily record to VCR the images that you are watching on the TV . For details, read the manual[...]

- 14 - Programme Selection (Previous or next programme)  Press   button to select the previous programme.  Press   button to select the next programme. Programme Selection (direct access): Press digit buttons on the remote control hand- set to select programmes between 0 and 9. TV will switch to the selected programme. T o select [...]

- 15 -  By pressing   or   button you may choose one of these options: Soft, S tandard and Bright. Setting Contrast  Using   or   button select Contrast.  Press   button to increase contrast level.  Press   button to decrease contrast level. Setting Bright-1  Using   or   button select [...]

- 16 - Note 1: At low signal level, the changings on the Noise Reduction function are not effective when there is menu on the screen. If the menu is removed, the effect of this function is seen. At normal broadcasting, Noise Reduction changings are effec- tive at once. Note 2: At moving pictures, while Noise Reduction is at maximum level, some pict[...]

- 17 - Use this settings to adjust volume for audio out terminal which is located at the right side of the TV .  Using   or   button select Audio Out.  Press   or   button or directly press  OK  button on Audio Out , to enter the Audio Out menu. Audio Out V olume  As you enter the Audio Out sound menu, V ol- u[...]

- 18 - T o Store Settings In Feature menu all settings are stored auto- matically . Install Menu Press " MENU " button, now you are in main menu. In the main menu, select  Install  using  or   button. Then enter the In- stall menu pressing  /   or  OK  but- ton. In EXT mode, Install menu appears like this:[...]

- 19 - T o Store Settings  Press   /   or  OK  button on Store option to store Install menu settings.  After stored, T -V LINK menu will appear . If you do not need to do T -V LINK, press BLUE but- ton to exit the menu. Program Menu Press " MENU " button, now you are in main menu. In the main menu, select  Progr[...]

- 20 - ton. T o learn the features of this function see " Autostore " below . Autostore, searches and stores all channels automatically on your TV , according to the transmission of programme systems in your area. First of all choose the  Country  by using   or   button. After Autostore is finalized, a programme list wil[...]

- 21 - Picture Mode Picture mode OSD is displayed when BLUE button is pressed. Picture mode can be changed to standard, soft, and bright. Sleep Timer Sleep Timer mode OSD is displayed when YELLOW button is pressed. The Sleep Timer is used to turn the TV off after a defined period of time after selecting this item. The timer can be programmed betwee[...]

- 22 - Zoom Modes Zoom mode can be changed by pressing Red button. Y ou can change the screen size ac- cording to the picture aspect ratio. Select the optimum one from the following ZOOM modes. AUTO: When a WSS (Wide Screen Signalling) sig- nal, which shows the aspect ratio of the pic- ture, is included in the broadcast signal or the signal from an[...]

- 23 - PC Mode Installation  Power off both Computer and Display before making any connections.  Set your PCs resolution correctly before con- necting to the TV . See the table in page 30 for supported modes.  Use a D-SUB cable to connect the TV's PC input to the computer's RGB output terminal. If you want to listen to the sou[...]

- 24 - PC Picture Menu In the Main menu, select  PC Picture  using   or   button, then enter the PC Picture menu pressing   /   or  OK  buttons. Contrast, Bright-1 and Colour T emperature adjustments in this menu are identical to ad- justments defined in TV picture menu. R, G , and B adjust the TV image colour in[...]

- 25 - T eletext T eletext is an information system that displays text on your TV screen. Using the T eletext in- formation system you can view a page of in- formation on a subject that is available in the list of contents (index). On screen display is not available in text mode. Contrast, brightness or colour control is not available, but volume c[...]

- 26 -  T eletext page number will be displayed on the upper left corner of the screen when the selected page is found.  Press   button to display the selected T eletext p age. T o exit T eletext  Press   button. The screen will switch to TV mode. Fastext and T optext Y our TV supports the 7 page T eletext system. When the page[...]

- 27 - If you have a device which outputs component signal, connect it to the EXT -3 terminal with a component video cable. V ia the ANT (aerial) socket If your equipment does not have an Euroconnector or RCA jacks, connect it to the TV with an aerial cable. For details, see the manual provided with the equipment.  T o store the test signal that[...]

- 28 - Peripheral Equipment Connections JVC LT-17C50BJ-50058073.p65 19.10.2004, 08:41 28[...]

- 29 - Peripheral Equipment Connections DECODER FOR SA TELLITE RECEIVER VIDEO HEADPHONE AUDIO Antenna Connections JVC LT-17C50BJ-50058073.p65 19.10.2004, 08:41 29[...]

- 30 - PC Input T ypical Display Modes The display has a maximum resolution of 1280 x 768, vertical sync. frequency range of 50-75 Hz and a horizontal sync. frequency range of 30-69 KHz. The following table is an illustration of some of the typical video display modes. The native resolution of the TFT -LCD Panel is 1280 x 768. Therefore using Mode [...]

- 31 - Tips Care of the Screen Clean the screen with a slightly damp, soft cloth. Do not use abrasive solvents as they may damage the TV screen coating layer Colors of image on screen are abnormal Have you selected the correct TV system? Is your TV set or house aerial located too close to the loudspeakers, non-earthed audio equip- ment or neon ligh[...]

- 32 - Specifications Broadcasting Systems P AL SECAM BG , DK, I, L, Lp Channels and VHF (VL) 46,25 MHz - 168,25 MHz Frequencies VH F (V H) 175,25 MHz - 463,25 MHz U H F 471,25 MHz - 863,25 MHz Cable TV (S1- S20/ S21-S41) Input Signal Video: Analog 0,7 Vp-p 75 ohm positive Sync: TTL Level positive or negative, Seperate sync. Horizontal Timing 30 - [...]