JVC Micro Component System UX-S10 manuale d’uso

LVT1563-001A [B] INSTR UCTIONS MICR O COMPONENT SYSTEM UX-S10 —Consists of CA-UXS10 and SP-UXS10 UX-S10[B]_C_01cover_f.p65 06.3.10, 5:17 PM 1[...]

Wa rnings, Cautions and Others IMPORT ANT for the U .K. DO NO T cut off the mains plug from this equipment. If the plug fitted is not suitable f or the power points in y our home or the cable is too short to reach a power point, then obtain an appro- priate safety appro ved extension lead or consult y our dealer . BE SURE to replace the fuse only w[...]

G-2 SAFETY INSTR UCTIONS “SOME DOS AND DON’TS ON THE SAFE USE OF EQUIPMENT” This equipment has been designed and manuf actured to meet international safety standards but, lik e any electrical equipment, care must be taken if y ou are to obtain the best results and saf ety is to be assured. Do read the operating instructions before y ou attemp[...]

1 Power sources •W hen unplugging the unit from the wall outlet, al ways pull on the plug, not the A C po wer cord. DO NO T handle the A C power cord with w et hands. Moisture condensation Moisture may condense on the lenses inside the unit in the following cases: • After starting to heat the room. • In a damp room. • If the unit is brought[...]

2 Contents Location of the Buttons and Controls ............................. 3 Main unit ................................................................................... 3 Remote Control ......................................................................... 5 Getting Started .................................................................. [...]

3 Location of the Buttons and Controls Become familiar with the b uttons and controls on your unit. Main Unit TIMER ON/OFF PHONES SOUND /BASS BAND OPEN MULTI CONTROL CD CONTROL TAPE TUNER CD 1 2 3 4 5 6 7 8 STANDBY/ON OPEN VOLUME CD SYNCHRO RECORDING MICRO COMPONENT SYSTEM UX-S10 STANDBY 9 p q w e r t y T op view Front view Inside the front cover U[...]

4 ON OFF 1ALL MP3 PRGM RAND TOTAL REMAIN MHz kHz SYNC SLEEP ST MONO SOUND BASS GR. 12 3 4 56 t e w p 9q r 8 7 Display window on the front panel Display window 1 (timer) indicator 2 ON/OFF (timer on-time/off-time) indica tors 3 SLEEP indicator 4 FM mode indicators • ST (stereo), MONO 5 SOUND indicator 6 BASS indicator 7 SYNC (synchro) indicator 8 [...]

5 SET RANDOM SLEEP REPEAT/ PTY SEARCH STANDBY/ON ON/OFF REMAIN/ PS/PTY/RT BEAT CUT DISPLAY/ CLOCK SET MUTING SOUND/ BASS CD TAPE CD VOLUME TUNER/ BAND FM MODE PROGRAM REMOTE CONTROL TIMER 1 2 3 4 5 6 7 8 u y t r e w q p 9 Remote Control See pages in parentheses for details. STANDBY/ON STANDBY VOLUME CD SYNCHRO RECORDING MICRO COMPONENT SYSTEM When [...]

6 Getting Started Unpacking After unpacking, check to be sure that you ha ve all the follo wing items. The number in parentheses indicates the quantity of each piece supplied. • FM antenna (1) • AM (MW) loop antenna (1) • Remote control (1) • Batteries (2) If any item is missing, consult your dealer immediately . Putting the Batteries into [...]

7 To connect AM (MW) and FM antennas 1 Attach the FM antenna to the FM CO AXIAL 75 Ω terminal. F asten it up in the position which gi ves you the best reception, then fix it on the w all, etc. 2 Connect the supplied AM (MW) loop antenna to the AM LOOP terminal. Place the antenna aw ay from the unit and adjust its position for the best reception. [...]

8 Setting the Clock Before operating the unit any further , f irst set the unit’ s clock. When you plug in the po wer cord, “0:00” starts flashing on the display . Y ou can set the clock when the unit is either turned on or in standby mode. •T here is a time limit in doing the following steps. If the setting is canceled before you f inish, [...]

9 Selecting the Sound Modes Y ou can select one of the 4 sound modes. •T his function also af fects the sound from headphones. •T his function only af fects the playback sound, and does not af fect your recording. To select the sound modes, press SOUND/B ASS repeatedly . • Each time you press the button, the sound mode changes as follows: POP[...]

10 T uning in to a Station 1 Pr ess TUNER/B AND to select either “FM” or “AM. ” The unit automatically turns on and tunes in to the previously recei v ed station—either FM or AM (MW). • Each time you press the button, the band alter nates between FM and AM (MW). 2 Pr ess and hold ¢ or 4 (or ¡ / ¢ or 4 / 1 on the unit) f or more than [...]

11 Presetting Stations Y ou can preset 30 FM and 10 AM (MW) stations manually . In some cases, test frequencies hav e been already stored for the tuner since the factory e xamined the tuner preset function before shipment. This is not a malfunction. Y ou can preset the stations you want into memory by following the presetting method. •T here is a[...]

12 Radio Data System allo ws FM stations to send an additional signal along with their regular prog ram signals. For example, the stations send their station names, as well as information about what type of program the y broadcast, such as sports or music, etc. W ith the unit, you can recei ve the follo wing types of Radio Data System signals. PS ([...]

13 Description of the PTY codes: NEWS: Ne ws. AFF AIRS: T opical program expanding or enlar ging upon the news—de bate, or analysis. INFO: Program the purpose of which is to impart advice in the widest sense. SPOR T : Program concerned with any aspect of sports. EDUCA TE: Educational programs. DRAMA: All radio plays and serials. CUL TURE: Program[...]

14 Playing Back the Entire Disc—Normal Play 1 Press 0 OPEN on the unit. The disc cov er opens. •Y ou can insert a disc while listening to another source. 2 Place a disc corr ectly with its label side up. 3 Close the disc cov er gently . 4 Press CD . The unit automatically turns on and the source changes to the CD player . After loading the disc[...]

15 Programming the T rack Playing Or der—Program Play Y ou can arrange the order in which tracks play before you start playing. Y ou can program up to 60 tracks. On the r emote control ONL Y : 1 Place a disc. • If the cur rent source is not the CD player , press CD. 2 Press PR OGRAM. The PRGM (program) indicator starts flashing on the display .[...]

16 REMAIN TOTAL REMAIN TOTAL When playing bac k an MP3 disc: 1 : Repeats one track. In Random Play , this function is not av ailable. ALL : In Normal Play , repeats all the tracks. In Program Play , repeats all the tracks in the program. GR. : In Normal Play , repeats all the tracks in a group. In Program Play and Random Play , this function is not[...]

17 F or T ape operations, use buttons inside the front co ver on the unit. Playing Back a T ape Y ou can play back type I tapes only . On the unit ONL Y : 1 Open the front co ver . 2 Press & / ) (stop/cassette holder open). The cassette holder opens. 3 Put a cassette in with the exposed part of the tape down. Playing Back T apes 5 Press T APE. [...]

18 IMPORT ANT : • It should be noted that it may be unlawful to re-r ecord pr e-recorded tapes, r ecords, or discs without the consent of the owner of copyright in the sound or video r ecording , broadcast or cable pr ogram and in any literary , dramatic, musical, or artistic embodied therein. •T he recording level is automatically set correctl[...]

19 Recording Discs —Disc Synchronized Recording Y ou can start disc play and recording at the same time. On the unit ONL Y : 1 Put a r ecordable cassette in with the exposed part of the tape down. • See also page 17. 2 Close the cassette holder gently . 3 Pr ess CD to select the CD player as the sour ce. 4 Pr ess ‡ (recording). The SYNC indic[...]

20 3 Press ¢ or 4 re peatedly to adjust the timer -playback volume. Press PR OGRAM after adjusting the v olume. The ON (on-time) indicator appears and the hour indication starts flashing. 4 Set the on-time y ou want the unit to turn on. 1) Press ¢ or 4 to set the hour , then press PR OGRAM. 2) Press ¢ or 4 to set the minute, then press PR OGRAM.[...]

21 To deactiv ate the timer temporarily , press TIMER ON/OFF until the (timer) indicator g oes of f. To activa te and change the timer , repeat steps 1 to 7 on page 20. •T o acti v ate the timer again without changing the setting, press TIMER ON/OFF until the (timer) indicator lights up on the display . If the unit is already tur ned on when the [...]

22 Maintenance To get the best performance of the unit, keep your discs, tapes and mechanism clean. General Notes In general, you will hav e the best performance by keeping your discs, tapes and the mechanism clean. • Store discs and tapes in their cases, and keep them in cabinets or on shelves. Cleaning the unit • Stains on the unit Should be [...]

23 If you are ha ving a problem with your unit, check this list for a possible solution before calling for ser vice. If you cannot solve the pr oblem from the hints given here, or the unit has been ph ysically damaged, call a qualified person, such as your dealer , for service. Tr oubleshooting Symptom Power does not come on. No sound is heard. Har[...]

24 Amplifier Section—CA-UXS10 Output Po wer (IEC 268-3): 10 W (5 W + 5 W) at 4 Ω (10% THD) Speakers/Impedance: 4 Ω – 16 Ω T uner FM tuning range: 87.50 MHz—108.00 MHz AM (MW) tuning range: 522 kHz—1 629 kHz CD player Dynamic range: 85 dB Signal-to-noise ratio: 85 dB Wo w and flutter: Immeasurable Cassette deck Frequency response: Norm[...]

EN 0306NYMMDWORI © 2006 Victor Company of Japan, Limited UX-S10 MICRO COMPONENT SYSTEM UX-S10[B]_C_01cover_f.p65 06.3.10, 5:17 PM 2[...]