JVC TK-C1430 manuale d’uso

E-1 TK-C1430 INSTR UCTIONS COLOUR VIDEO CAMERA L WT0207-001 B -H BF LOOK CO LOR VIDEO CAMERA DIGITAL TK-C1430/01-05,E.65E 9/13/04, 2:53 PM 1[...]

E-2 IMPOR T ANT SAFEGU ARDS PORTABLE CART WARNING (symbol provided by RETAC) S3125A 1. Read all of these instructions. 2. Save these instructions for later use. 3. All warnings on the product and in the operating instructions should be adhered to. 4. Unplug this appliance system from the wall outlet before cleaning. Do not use liquid cleaners or ae[...]

E-3 13. Follow all warnings and instructions marked on the appliance. 14. Do not overload wall outlets and extension cords as this can result in fire or electric shock. 15. Never push objects of any kind into this appliance through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a fire or electric sh[...]

E-4 W ARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE T O RAIN OR MOISTURE. Due to design modifications, data given in this instruction book are subject to possible change without prior notice. A VER TISSEMENT : POUR EVITER LES RISQUES D’INCENDIE OU D’ELECTRO- CUTION, NE P AS EXPOSER L ’APP AREIL A L ’HUMI[...]

E-5 Thank you f or purchasing this pr oduct. (These instructions are for TK-C1430E) Before beginning to operate this unit, please read the instruction manual carefully in or der to make sure that the best possible perf ormance is obtained. CONTENTS INTRODUCTION Features ...............................................................................[...]

E-6 䡲 A DSP (Digital Signal Processor) features a Extended Dynamic Range (ExDR) and enables to shoot both bright and dark locations. 䡲 The use of a CCD with a SENSE UP (X32) function realized the minimum luminous flux density for subject of 0.9 lx (F1.2, 50%, AGC 20dB) and 0.03 lx (at SENSE UP (X32)). Furthermore, we realized 0.03 lx (F1.2, 50%[...]

E-7 ● To save energy , when it is not being used turn the system’s power of f. ● This camera has been designed for indoor use. When you use it outdoors, be sure to use a housing or the like. ● Do not install or use the camera in the following places. • In a place exposed to rain or moisture. • In a place with vapor or oil soot, for exam[...]

E-8 INTR ODUCTION 1 Lens mount To attach the lens. This is applicable to both C-mount lenses and CS-mount lenses. 2 Back f ocus adjustment ring Adjusting the back focus during lens installation. When readjustment is required, loosen the locking screw 3 by turning it counterclockwise and turn the back focus adjustment ring 2 . After the adjustment, [...]

E-9 8 Cover The cover slides open when push to the left. 9 [VIDEO/DC] Iris Selector Switch This should be set according to the type of lens if an automatic iris control lens is used. VIDEO: In case of lens with EE amp built- in. DC: In case of lens without EE amp built-in. (DC: At time of factory shipment) 10 [IRIS] Iris T erminal This is connected[...]

E-10 INTRODUCTION 13 [ , , , ] Up-and-down, left-and- right Button These buttons select items on the menu screen and change a set value. (  Page 23) 14 [EXT .TERM-ON/OFF] T erminal On/Off Switch of External Synchr onization Signal This is a terminating ON/OFF switch for the external synchronization input signal. When this is switched ON, termina[...]

E-11 DC12V AC24V Y/C OUT SYNC IN POWER VIDEO OUT SEE INST- RUCTION MANUAL + - 12 CLASS 2 ONL Y(U TYPE) ISOLATED POWER ONL Y (E TYPE) TX + TX - RX + RX - AUX GND A B CD ⁄ ) ( fi › ¤ ‹ 19 [DC 12V , A C 24V] Po wer input terminals To input DC 12V or AC 24V power . 20 [TX+ A , TX- B , RX+ C , RX- D ] Control signal connection terminals T ermina[...]

E-12 REC PLAY FF REW REVERSE PAUSE/ STILL REC CHECK STOP/EJECT COUNT/ CLOCK TIME MODE TIMER REC AL/PL RESET MENU VIDEO CASSETTE RECORDER SHIFT/TRACKING SET/V.LOCK RESET /CANCEL OPERATE SR-L910 OPE. LOCK 1 TO CAMERA TO CAMERA DATA I / O DATA I / O RX + RX - TX + TX - COM COM 1 2 3 4 5 6 7 8 COM COM 9/1 9/1 10/2 10/2 11/3 11/3 12/4 12/4 13/5 13/5 14/[...]

E-13 CAMERA SETUP SET MENU EXT TERM-OFF INT/GL DUPLEX RX TERM-OFF NOT USED ON LL SIMPLEX ON EXT TERM-OFF INT/GL DUPLEX RX TERM-OFF NOT USED ON LL SIMPLEX ON VIDEO DC IRIS AWC A RX + B RX C TX + D TX TX + A TX B RX + C RX D TX + A TX B RX + C RX D RM-P2580 Camera 2 control signal connection terminals Connect: Camera TX+ to RM-P2580 RX+ Camera TX– [...]

E-14 CONNECTION/INST ALLA TION SET MENU CAMERA SETUP EXT TERM-OFF INT/GL DUPLEX RX TERM-OFF IOT USED ON LL SIMPLEX ON VIDEO DC ALC LEVEL Av Pk L H DC12V AC24V CLASS 2 ONL Y(U TYPE) ISOLATED PO WER ONLY (E TYPE) TX + TX - RX + RX - AUX Y/C OUT SYNC IN POWER VIDEO OUT GND A B CD SEE INST - R UCTION MANUAL 1 + - 2 Execute connection/installation accor[...]

E-15 Mounting the lens VIDEO DC IRIS VIDEO DC 3 4 2 1 Mount the lens according to the procedures described below . 1. Before mounting a lens, check whether it is a C-mount or CS-mount lens. To change the mounting method, loosen the back-focus locking screw (M 2.6) using a Phillips head screwdriver , turn the back-focus adjusting ring with your fing[...]

E-16 DC12V AC24V CLASS 2 ONL Y(U TYPE) ISOLATED PO WER ONLY (E TYPE) TX + TX - RX + RX - AUX Y/C OUT SYNC IN PO WER VIDEO OUT GND A B CD SEE INST - R UCTION MANUAL 1 + - 2 Connect the DC 12 V or the AC 24 V power supply to the DC 12V/AC 24V terminals. T o prevent connection errors o r a cable disconnection, we recommend the use of lug plates for th[...]

E-17  Contr ol signal cables These cables should be connected only when it is required to control the camera using the RS-442A or RS-485 signals. The use of 0.65 4-conductor twisted pair cables is recom- mended. With these cables, the maximum ex- tension distance is 1,200 m. Connect to the other side in pairs like this. Connect to the other side[...]

E-18 DC12V AC24V CLASS 2 ONLY(U TYPE) ISOLATED POWER ONLY (E TYPE) T X + T X - R X + R X - A U X Y/C OUT SYNC IN POWER VIDEO OUT G N D A B CD SEE INST- RUCTION MANUAL + - 1 2 2mm 6mm M3 x 6mm MAX. 7 mm Mounting the camera CONNECTION/INST ALLA TION Camera mounting screw hole Camera-mounting bracket Rotation prevention hole When mounting the camera o[...]

E-19 VIDEO DC IRIS IRIS VIDEO DC Camera- mounting bracket Fixing screws Installation of camera • Mounting from the bottom This camera is originally designed to be mounted from the bottom, as shown q . The hole is standard photographic pan- head screw size (1/4-20 UNC). Example the Fixing unit or Pan/T ilt unit. • Mounting from the top Remove th[...]

E-20 CONNECTION/INST ALLA TION Lens adjustment ALC LEVEL Av Pk L H Connect the camera according to the connection method, turn it on, display an image on the monitor , and check the image. The camera has been factory-adjusted to the best position, but it may need to be adjusted according to the object conditions or combination of lenses. If the ima[...]

E-21 Bac k focus adjustment • With a fixed-f ocus lens If the focus can not be adjusted correctly by rotating the lens focus ring, adjust the back focus as follows. 1. Loosen the back focus locking screw by turning it counterclocckwise ( ) with a screwdriver . 2. Shoot a pattern closely . 3. T urn the lens focus ring to ⬁ . 4. T urn the back fo[...]

E-22 CONNECTION/INST ALLA TION A uto white balance contr ol adjustment Each light source has its own colour temperature. Therefore, when the main light source lighting an object is changed, the white balance should be adjusted again by pressing the A WC button. 1. Place a white object under the same lighting condition as the object to be shot and z[...]

E-23 MENU SETTING Setting the menu CAMERA SETUP SET MENU EXT TERM-OFF INT/GL DUPLEX RX TERM-OFF NOT USED CAMERA SETUP SET MENU ON LL SIMPLEX ON VIDEO DC IRIS AWC 1. Press the MENU button. The MENU screen is displayed. 2. Set the cursor (>) to a desired sub-menu using the , button. 3. Press the SET button. The selected sub-menu screen is displaye[...]

E-24 MENU SETTING The flow of men u screen  Page 26  Page 31  Page 34  Page 37  Page 39 MEN U SY N C AD J U S T VID E O A D J U S T MOD E E SL E C T ALC SET T I N G S COM M U N I CA T I O N MA I NT E NA NCE MOT I ON D E TE C T SYNC D AJ U S T VP H A S E HP H A S E SC E COARS SC F I NE DE VI O A D JU S T WH T E B A L E A T W NC A I CO[...]

E-25 墌 Page 26 墌 Page 32 墌 Page 35 墌 Page 30 墌 Page 36 墌 Page 38 墌 Page 35 CT FA O R Y S EN G S TT I CA C E L N CL A W I ( HOU T T I T L E ) RT E CL A ( ) RA L L E L B : G : L AC S E T TI N G S II RS L E V E L N O R M A L AE VR A E G: P E A K 82 : AC GM O D E 2d B 0 SU T HT E R E x D R / NR M A L O MOD E S EL E C T CAM ERA T I T L E E[...]

E-26 Item Functions and set values Initial value V PHASE H PHASE SC COARSE SC FINE This adjusts the vertical synchronization to those of other cameras when a selector switch for the synchronizing system on the side is at LL. (50Hz power region only .) When it is not set to LL, “---” will appear , disabling change the set value. [Set value: –1[...]

E-27 Item Functions and set values Initial value SHUTTER /ExDR * When the SHUTTER (ExDR) item is set to NORMAL, the following items (SHUTTER SPEED, F AST LIMIT , ExDR LEVEL, and M.ExDR SPEED) cannot be changed. SHUTTER SPEED NORMAL 1/120 This sets the electronic shutter as well as the ExDR (Extended Dynamic Range). The use of an electronic shutter [...]

E-28 1/100000 NORMAL 1/4000 20dB OFF OFF ALC SETTINGS Screen (Continued) MENU SETTING Item Functions and set values Initial value F AST LIMIT ExDR LEVEL M.ExDR SPEED AGC MODE LOLUX MODE SENSE UP This sets the fastest value of a shutter speed when AUTO is set. The MANUAL, M. ExDR, A. ExDR set value is displayed as “ - - -” and cannot be changed.[...]

E-29 Item Functions and set values Initial value PRIORITY BLC MOTION OFF OFF AREA 1 AREA 2 AREA 3 AREA 4 Light metering area Light metering area Light metering area Light metering area Light metering area This item sets the order in which the AGC and slow shutter speed decrease function when the object brightness becomes low . If B&W item of th[...]

E-30 ALC SETTINGS Screen (Continued) MENU SETTING Item Functions and set values Initial value B&W COLOUR MODE .. B&W AUTO LEVEL This function sets the colour modes to colour or B&W . When switching the mode between “colour ’’ and “B&W” is carried out, the focus may be dislocated. In such a case adjust the focus again. Swit[...]

E-31 Item Functions and set values Initial value WHITE BALANCE COLOUR LEVEL ENHANCE LEVEL PEDEST AL LEVEL AUTO BLACK CTL Selects the white balance adjustment function. The white balance can be adjusted manually or automatically for light within the colour temperature range of 2500K to 8000K. •A TW: Auto-T racking White Balance mode. This automati[...]

E-32 MODE SELECT Screen T itles, image reversion, etc., are set. Item Functions and set values Initial value CAMERA TITLE EDIT REVERSE MODE HLI MODE ALM.TITLE SIZE ALARM COLOUR – OFF OFF DOUBLE WHITE ALAR M AL AR M NORMAL DOUBLE Bring up the CAMERA TITLE, EDIT screen. (  Page 38) Settings are executed for image reversion. OFF: Image does not r[...]

E-33 Item Functions and set values Initial value AUX TERMINAL D.ZOOM MAX (B&W IN) x2 For setting the signal input or output of the AUX terminal. MOTION: A signal is output if there is a change in the area set on the MOTION DETECT screen. B&W OUT : A signal is output when the camera switches to B&W or Colour mode. B&W IN: Set to this[...]

E-34 MENU SETTING MO TION DETECT Screen Item Functions and set values Initial value MODE Settings are executed about the motion detecting function that emits alarm signals when there exists any motion in the image. Alarm signals are output from the auxiliary terminals on the back. This sets ON/OFF of motion detecting function. OFF: Motion detecting[...]

E-35 COMMUNICA TION Screen Item Functions and set values Initial value STYLE MACHINE ID Settings are made for the control signal-connecting terminals on the back. If the setting is changed, be absolutely sure to switch on the power again. P TO P – – – White spot compensation is performed. MAINTENANCE Screen Item Functions and set values Initi[...]

E-36 BLC EDITTING Screen MENU SETTING It is possible to set freely the light metering area for backlight compensation. The 2 screens of EDIT1 and EDIT2 can be set. CAMERA SETUP SET MENU AWC L AC S E T TI N G S II RSL E V E L N O R M A L AE V RAG E : PEAK 8 2 : SU T HT E R E x D R /N R M A L O PI O RR I T Y M T I O N O BC L EDIT 1 SN S EE U P O F F [...]

E-37 Manual Adjustment of White Balance When automatic adjustment of the white balance results in a “reddish screen”, etc., adjust the white balance manually . DE VI O A D J U S T WH T E B A L E AWC NC A I CO O UR L E N OR MAL EL V L EN A N C E LE NOR MA L EL V H PE E ST AL LE NOR MAL EL V D AU O BL AC K O F F TL C T WH I T E BAL A NC E CO N T [...]

E-38 1. Select the item CAMERA TITLE on the MODE SELECT screen, and push the SET button. Then, the CAMERA TITLE screen is brought up. 2. Select the first character from the character area using buttons. The selected character is displayed flashing on and off. 3. Push the SET button. The first character gets fixed and the blinking title input area m[...]

E-39 Setting the MO TION DETECT Function It is possible to set freely the area where MOTION DETECTING functions. TI MO O N DE T E C T MO E O FF D LE E L N O R M A L V AR A ED I T E AL R MT I E M1 0 s A DE ON ST RA T I N O M .. .. MOTION DETECT screen flash lights gray flash Setting screen 1. Select the item AREA EDIT on the MOTION DETECT screen. 2.[...]

E-40 MOD E S E L E C T CAM ERA T I T L E E D I T RE V ERS E M O DE OF F AL M . T I T LE S Z E ID O UBLE AL AR M CO LOUR W H I T E A UX TERMINAL (B&W IN) D. ZOOM MAX x 2 HLI MODE OFF .. Output of Black-White/Color s witching signal It is possible to output black-white/color switching signal from the AUX terminal on the back of this unit. Perform[...]

E-41 Contr ol by Blac k-White/Color switching signal fr om the outside Carry out the following setting when you link in motion the black-white/color switching of this unit and infrared illumination, etc., using the switching signal from the outside control device. 䡲 Set the B&W item to A UX. 1. Select B&W/COLOR MODE on the ALC SETTING scr[...]

E-42 White spot compensation CCDs have the general characteristic that white spots appear on the screen when the CCD is operated at high temperatures or when they are used with a slow shutter speed. This unit has a built-in white spot compensation function to reduce these white spots. (The number and the size of the white spots changes according to[...]

E-43 Image pickup device: 1/3 type IT CCD, 752 (H) × 582 (V) Synchronization method : Internal, Line lock, Full Genlock Scanning frequency: (H) 15.625 kHz, (V) 50 Hz Resolution: 480 TV lines (H) VIDEO OUT : Composite video signal 1 V (p-p), 75 Ω (BNC) Y/C OUT : Y : 1.0 V (p–p), 75 Ω C: 0.3 V (p–p), 75 Ω V ideo S/N ratio: 50 dB (AGC OFF) [...]

is a registered trademark owned by Victor Company of Japan, Limited. is a registered trademark in Japan, the U.S.A., the U.K. and many other countries. © 2004 Victor Company of Japan, Limited. TK-C1430 COLOUR VIDEO CAMERA Printed in Thailand L WT0207-001 B -H ® ® TK-C1430/23-44,E.65E 9/13/04, 3:01 PM 44[...]