JVC TK-C215V4E manuale d’uso

DOME CAMERA TK-C210FW TK-C215V4 TK-C215V12 INSTR UCTIONS For Customer Use: Enter below the Se rial No. which is located on the body . Retain this inf ormation for future referen ce. Model No . Serial No. LST0308-001C TK-C210FW/TK -C215V4/TK-C215V12 TK-S215_EN.book Pag e 1 Tuesday, March 2 8, 2006 9:39 AM[...]

2 Intr oduction Informat ion for User s on Disposal of Old Eq uipment [Euro pean Union] This symbol indicates that the electr ical and electronic equi pment should not be disposed as general household waste at its end-of-life. Instead, the product should be handed ov er to the applicable co llection point f or the recycling of electrical and electr[...]

3 I 䢇 The unit is to be powered by a DC 12 V or an AC 24 V po wer supply . 䢇 The unit is to be powered by a UL Listed DC 12 V or an AC 24 V po wer supply . (For U type) 䢇 The AC 24 V and 12 V DC power supply shall conform to the f ollowing: Class 2 only (For USA), Isolated power supply only (F or Europe). 䢇 This installation should be made [...]

4 Intr oduction (continued) These are general IMPORT ANT SAFEGU ARDS and certain items may not appl y to all appliances. 1. Read all of these instructions. 2. Sav e these instructions for later use. 3. All warnings on the product and in the ope rating instr uctions should be adhered to. 4. Unplug this appliance system from the wall outle t before c[...]

5 Thank you f or purchasing this product. (These instructions are for: TK-C210FWE, TK-C215V4U/E, TK-C215V12U/E.) Before beginning to operate this unit, please read the instruction manual carefully in order to make sure that the best possible perf or mance is obtained. 䡵 Realizing a Hi gh Picture Quality This camera realizes 540 TV lines* and S/N5[...]

6 Intr oduction (continued) Intr oduction Safety P recautions .......................................... 2 Characteristics ................................................ 5 Contents ............................ .............................. 6 Operating Precautions .................................... 7 Name of P ar ts ............................[...]

7 䢇 T o save energ y , when it is not being used tur n the system’ s power off. 䢇 T his camera has been designed f or indoor use. It cannot be used outdoors. 䢇 Do not install or use the camera in the follo wing places. ● In a place exposed to rain or moisture. ● In a place with vapor or oil soot, f or example in a kitchen. ● In a temp[...]

8 Intr oduction (continued) Camera A Mounting hole (elliptica l) x 4 Use these when mounting the camera to the electrical box. ( A pg. 22) NO TE: When installing the camera onto the electric box, install it using the supplied adaptor ring. B Mounting hol e (round ) x 4 Use these when mounting the camera to the ceiling or wall. ( A pg. 18, 20) C Out[...]

9 Camera (Interior) The picture below shows the camer a when the dome cover and outer case are remov ed. Procedures for remo val. ( A pg. 18 A Embedding the camera to the ceiling B , Step 3. to Step 4. ) J Fastening Screw (x 3) When embedding the camera in the ceiling, turn this screw to secure the camera. This screw belongs to a par t of the ceili[...]

10 Intr oduction (continued) Set the video setting switches on the camer a unit before mounting it. T o set the switches , use a fine-tipped scre wdriver . A [RESET/SPO T] RESET/SPO T button When this button is pressed, the v alue of the white balance or phase adjusted manually is reset to the default v alue. ● When the 2 [SELECT] switch is set t[...]

11 3. [SYNC] Synchr onization system selection swit ch. This switch sets the synchronizing system f or the camera. INT : This is set for internal synchronization LL (Line Lock): The camera’ s vertical synchronization is lock ed to the AC 24 V pow er line frequency . When switching between multiple cameras using a switcher , selecting this mode an[...]

12 Intr oduction (continued) Set the video setting switches on the camer a unit before mounting it. T o set the switches , use a fine-tipped scre wdriver . A [IRIS LEVEL] Iris level adjustment For adjusting the le vel of the automatic aper ture control lens. This adjustment only needs to be made when required. Use t his to accommodate par ticular s[...]

13 2. [SELECT] WHT .BAL./PHASE setting switch. WHT .B AL.: The F [R/B, +/ - ] b uttons are used as [R/B] adjustment buttons . PHASE: The F [R/B, +/ - ] b uttons are used as [+/ - ] adjustment buttons . (Default setting: WHT .BAL.) 3. [SYNC] Synchr onization system selection swit ch. This switch sets the synchronizing system f or the camera. INT : T[...]

14 Installati on and connection Set the video setting switches on the camer a unit before mounting it. T o set the switches , use a fine-tipped scre wdriver . A Function selection switches 1. [BLC] Backlight compe nsation switch. When the object is placed against the light, setting this to A ON B increases the iris aper ture by 1 stop and the objec[...]

15 DC 12 V or A C 24 V power supply cable Connect the DC 12 V or the AC 24 V power supply to the DC 12 V/AC 24 V terminals on the terminal board. T o pre vent connection errors or a cable disconnection, we recommend the use of lug plates for the connections. The f ollowing table shows the connection distances and connection cables pro vided that 2-[...]

16 Installation and conn ection (continue d) NO TE: ● T ur n OFF the power supply to all equipment to be used before making connections . ● Read the Instr uction Manual for each piece of equipment to be used before making connections. CA UTION: P ower consumption of TK-C210FW/TK-C215V4/ TK-C215V12 are different from one another . When installin[...]

17 Getting Started CA UTION: ● When mounting the camera to the ceiling, ensure to wear saf ety glasses to protect the eye from any f alling object. ● Attachment of a embedded cover in the ceiling (recess brack et) may be mandatory in cer tain regions. If this is so , ensure that the embedded cov er (recess brack et) is securely attached before [...]

18 Installation and conn ection (continue d) Embedding the camer a to the ceilin g * Make use of a ceiling material with a thickness between 9.5 mm to 22 mm. 䡵 Setup 1. Open a hole in the ceiling. ( R 120 mm) 2. Draw the fall pre vention wire mounted to the ceiling slab and the cable ou t from the ceiling in adv ance . CA UTION: ● Select a sui [...]

19 䡵 Connecting 1. Attach the f all prevention wire to the camera, followed b y attaching it to the ceiling slab (Fall prevention wire is not included.) 2. Connect the video signal cab le . ( A pg. 14) Lower the co ver and connect the connectors . Upon connecting, cover the connectors using the protection cover . 3. Connect the input po wer suppl[...]

20 Installation and conn ection (continue d) When mounting the camera directly to the ceiling or on th e wall When mounting to a wall, replace areas indicated as “ceiling” in the procedures by “wall”. 䡵 Setup 1. Open a hole in the ceiling. ( R 30 mm) Make us e of the template sup plied to open a ho le. 2. Draw the fall pre vention wire mo[...]

21 4. Connect the video signal cab le . ( A pg. 14) Lower the protection co ver and connect the connectors. Upon connecting, restore the protection cov er to cover the connectors . 5. Connect the input po wer supply cab le . ( A pg. 15) 6. Install the Ferrite core (TK-C210FW onl y) ( A pg. 14) 7. Connect the alarm cabl e . (TK-C215V12 only) ( A pg.[...]

22 Installation and conn ection (continue d) When mounting t h e camera to the electrical box NO TE: Before mounting the camer a to electrical boxes , please consult your nearby JVC authorized dealer for details on the ty pe of electrical box f or which mounting is possible. 䡵 Connecting 1. Align j with the shooting direction when mounting the co[...]

23 Adjusting Im age Upon mounting the camera, adjust the images while checking the actual image. Mounting the test monitor Connect the [MONITOR] terminal of this camera to a test monitor to adjust the camera’s shooting direction, image and fo cus. * The power to the camera body must be ON when adjustments are performed. NO TE: ● The TK-C210FW [[...]

24 Adjusting Ima ge (continued) Adjusting the field angle/focus/ brightness (Not av ailable on TK-C210FW) Upon deter mining the imaging direction, adjust the field angle, f ocus and iris lev el accordingly . The method of adjustment varies with the camera in use.  TK-C215V4 ( A pg. 24)  TK-C215V12 ( A pg. 25) 䡵 TK-C215V4 Adjusting field ang[...]

25 䡵 TK-C215V12 ● 2 types of angle of view ma y be selected for TK-C215V12. In general, set in a wa y such that the home position shoots a wide range and the alar m position a narrow range. ● Use the alar m input mode selection switch to set the actions when there is an alar m input. ( A pg. 13) CA UTION: ● When setting images on TK-C215V12[...]

26 Adjusting Ima ge (continued)  Registe ring alarm position For registering the angle of view during monitoring when there is an alar m input. 1. Check that the [ALARM POSITION] indicator light is turned o n. Registration of alarm position is enabled. ● Press the [POSITION SELECT] button if the [ALARM POSITION] indicator light is off. 2. Adju[...]

27 As a general characteristic unique to CCDs, white-spots may appear on the screen with age. In order to reduce this phenomenon, this unit is equipped with a white-spot correction feature. Switch on the camera pow er supply and wait for at least 30 minutes. (Not av ailable on TK-C210FW)  TK-C215V4  TK-C215V12 1. Remove the dome cover . 2. Co[...]

28 Other s 䡵 Camera Signal system: U type : Based on NTSC standard E type : Based on P AL standard Scanning frequencies U type : 15.734 kH z (Horizontal), 59.94 Hz (V er tical) E type : 15.62 5 kHz (Horizontal), 50 Hz (V er tical) Image device: 1/4" IT CCD Effective picture elements: U type : 380,000 pixels, 768 (H) x 494 (V) E type : 440,0 [...]

29 䡵 General P ower supply : AC 24 V H 50 Hz/60 Hz DC 12 V d P ower consumption TK-C210FW: E type : 220 mA TK-C215V4: U type : 4.2 W E type : 340 mA TK-C215V12: U type : 6.6 W E type : 550 mA Ambient temperature : - 10 f to 50 f (14 g to 122 g ) (Operation) :0 f to 40 f (32 g to 104 g ) (Recommended) Mass TK-C210FW : Appro x. 450 g TK-C215V4 : Ap[...]

30 Others (continued) 䡵 External Dimensions [Unit: mm (inches)]  When cover is attached  When embedded * Specifications and appea rance of this unit and related products are subject to change for product improv ement without pr ior notice. 20 (13/16) 83.5 (3-5/16) 46 (1-13/16) 4- φ 4.5 (3/16) 6 (1/4) 4.5 (3/16) φ 89 (3-1/2) φ 22 (7/8) φ[...]

31 Focus chart TK-S215_EN.book Pag e 31 Tuesday, March 28, 2006 9:39 AM[...]

© 2006 Victor Company of Japan, Limited LST0308-001C TK-C210FW/TK-C215V4/ TK-C215V12 DOME CAMERA TK-S215_EN.book Pag e 32 Tuesday, March 28, 2006 9:39 AM[...]