Kodak A-61514 manuale d’uso

A-61514 9/2004 © Eastman Kodak Company , 2004 Printed in U.S.A. CA T No. 126 4951 EASTMAN KODAK COMP ANY Document Imaging Rochester , New Y ork 14650 Kodak and Ektamate are trademarks of Eastman Kodak Company . Printed on recycled paper . DOCUM E N T IMAGING i100 Series Scanners User’ s Guide A-61514 Part No. 9E3718 CA T No. 126 4951 A61514 11/8[...]

A-61514 September 2004 i Content s Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Scanner features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Paper transport features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [...]

ii A-61514 September 2004 Input and output trays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Attaching the input tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Attaching the output tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 T ray e[...]

A-61514 Sept ember 2004 1 Introduction Before you install and opera te your Kodak i100 Series Scanner , take a few minutes to read through this guide. It cont ains import ant information a bout installing, using , and maintaining you r scanner . • Kodak i150 Scanner is a desktop simpl ex color scanner with an automatic document feeder . • Kodak[...]

2 A-61514 September 2004 Paper transport features • Automatic and manual feeding • Multifeed detectio n by document length and/or do cument thickness • Automatic document feeder (ADF) with operator-assisted “in finite” and single-sheet feeding Spee d/cap acity (throughput) The following speeds in p ages per minute (ppm ) are for color , g[...]

A-61514 Sept ember 2004 3 Prep aring document s for scanning • A batch of document s to be fed into the scanner must be arrange d so that the leading edges of all document s are aligned and centered under the automatic document feeder . This allows the feeder to introduce document s into the scanner one at a time. Docume nts must b e positioned f[...]

4 A-61514 September 2004 Safety information • When placing the scanne r , make sure that the electrical power outlet is located within 1.52 metres (5 feet) of the scanner and is ea sily accessible. CAUTION: The scanner and power s upply must only be used indoors in a dry location. • Material Safety Data Sheets (MSDS ) for information ab out che[...]

A-61514 Sept ember 2004 5 Safety and regulatory agency approvals The Kodak i100 Series Scanne rs conform to applica ble national and international product sa fety and electronic emission regu latory requirement s. This includes, but is not limited to, the following: Environmenta l information •T h e Kodak i100 Series Scanne rs are designed to mee[...]

6 A-61514 September 2004 EMC st atement s United S t ates This equipment has been tested and found to comply with the limit s for a Class B digital device pursua nt to Part 15 of the FCC rules. These limits a re designed to provide r easonable protecti on ag ainst harmful interference in a residential installatio n. This equipment generates, uses, [...]

A-61514 Sept ember 2004 7 Inst alling the Scanner Site specifications Place the scanner: • in a clean area with tempera ture and relative humidity typical of an office environm ent CAUTION: The scanner and power s upply must only be used indoors in a dry location. • on a stable, leve l work surface capable of suppo rting the follow ing weights:[...]

8 A-61514 September 2004 Recommended system configuration T o operate the sca nner at its optimum speed, the followin g configuration (or better) is reco mmended. NOTE: The actual performance of th e system depends on the scanni ng application, choice o f scanning p arameters, and the host computer configuration. • IBM PC (or compatib le) with a [...]

A-61514 Sept ember 2004 9 Removing the foam sheet The scanne r is packed with a foam sheet in side to protec t the rollers during shipping. This foam sheet must be removed before you can begin scanning. 1. Lift the scanner out of the box and pl ace it on a stab le, level work surface that is cap able of supporting it. 2. Lift up the scann er door r[...]

10 A-61514 September 2004 Rear 8 Output tray 9 Output tray exten der 8 9 Side 1 Output tray exten der 2 Output tray 3 IEEE-1394 (FireWire) port 4 Power inpu t 5 Input tray 6 Input tray extend er 7 Service LEDs 8 Upper imaging guide access door (i160 Scanner onl y) 7 1 2 4 5 6 3 8 Side 1 Red indicator 2 Green indicato r See the section entitled, “[...]

A-61514 Sept ember 2004 11 Internal 1 Separator module 2 Normal force rollers 3 Rear drive roller cover 4 Front drive r oller cover 5 Feed module 1 2 3 4 5[...]

12 A-61514 September 2004 Making connections Follow the instructions fo r installing the IEEE-1394 (FireWire) card and the Kodak Driver Soft ware before you plug the scanner into the host compute r . IMPORT ANT : Y ou must insta ll the sof tware on the host comp uter before you install the scanner . Inst alling the IEEE-1394 (FireWire) card in the [...]

A-61514 Sept ember 2004 13 Power setup One or more p ower cords may be su pplied with the scanner . Use only the cord required for your po wer type. Dispose of any unneed ed power cords properly . Use only the power supply that was pr ovided with the scanner . CAUTION: The scanner and power s upply must only be used indoors in a dry loca tion. IMPO[...]

14 A-61514 September 2004 If you are installin g the scanner on a computer that is running Windows 2000, the followi ng screen ma y appear . •S e l e c t Ye s . Kodak has successfully tested the i1 00 Series Scan ners with Windows 2000. Y our scanner is now inst alled. If you are inst alling the scanner on a co mputer that is runn ing Windows XP [...]

A-61514 Sept ember 2004 15 1. Select Next . The following screen appears. 2. Select Continue An yway . Kodak has successfully tested the i100 Series Scanners with Windows XP . The following screen appear s. 3. Select Finish . Y our scanner is now installed.[...]

16 A-61514 September 2004 Input and output trays The input and output trays snap into place. They also may be adjusted to fit diff erent document size s. The input and ou tput trays also m ay be folded fla t up against the scanner to save sp ace when the sca nner is not in use. Att aching the input tray 1. Locate the input tray slots (large holes) [...]

A-61514 Sept ember 2004 17 Adjusting the output tray The adjustable output tray has three possible positions. • Set the outp ut tray to the lowest position when you are scanning long documents. • Set the output tray to the middle position when yo u are scanning letter- or A4-size document s. • Set the outp ut tray to the hi ghest position wit[...]

18 A-61514 September 2004 Using the Scanner S t arting and stopping scanning Scanning is controlled by software d eveloped for your application. T o start and stop scanning, refer to th e document ation provided with yo ur softwar e. Automatic feeding T o scan a batch of documents, fo llow th e guidelines for size, type, qua ntity , etc., in the In[...]

A-61514 Sept ember 2004 19 Continuous feeding Continuous feeding allows you to plac e additional batches of documen ts in the feeder for “ infinite” feed ing (with oper ator assistance). • When only a few document s from one batch remain in the feeder , place th e next batch face down on to p of those documen ts. Manual feeding Follow the gui[...]

20 A-61514 September 2004 Damaged document s Y ou c an scan torn or fragile docu ments through th e automatic document feeder if they are placed in a protective plastic sleeve. 1. Place the damaged document into a protective sle eve. 2. Position the sleeve face down , folded edge first, and centered in the ADF . 3. Lift the gap re lease lever , if [...]

A-61514 Sept ember 2004 21 Maintenance Cleaning the scanner The scanner will collect du st and other deb ris during routine scanning. For optimal scanner perfor mance, follow the det ailed cleaning instructions in this section and clean the feed modu le rollers, separator module rolle rs, imaging guides, transport area, and p aper p ath at least on[...]

22 A-61514 September 2004 Cleaning the sep arator module 1. Power down the scanner . 2. Remove any documents from the feed er area. 3. Lift up the scanner door release to unlatch the scanner d oor . 4. Pull up to open the scanner door . 5. Remove the separator module by pulling it down and lifting it of f. 6. Manually ro tate and wipe the separator[...]

A-61514 Sept ember 2004 23 7. Inspect the rollers. If the separator roller tires sh ow signs of wear or damage, replace the tire s or the sep arator module. 8. Insert the separator module and alig n the shaft ends. 9. Press until the sep arator module clicks into place. 10. Go to the next section to clean the feed module. Cleaning the feed module 1[...]

24 A-61514 September 2004 3. Manually rotate and wipe the feed m odule rollers with a roller clea ning pad. 4. Inspect the feed module. If the feed module tires show signs of wear or damage, replace the tires or the feed module. 5. Remove any dust or debris from the tray area under the feed module and the front roller cover . 6. Insert the feed mod[...]

A-61514 Sept ember 2004 25 3. Wipe the upper and lower tran sport areas with a ro ller cleaning pa d. 4. Dry the transport area with a dry S taticide Wipe. 5. Push against the raised edge on the left sid e of the rear roller co ver and pull the cover up and out to remove it. 6. Rem o ve any d u st or d eb r is u nd e r the r ear d r iv e r o ller c[...]

26 A-61514 September 2004 Cleaning the p aper p ath 1. Remove the wrapping from the T ransport Cleaning Shee t. 2. Adjust the p aper feeder guides to fit the cle aning sheet. 3. Feed the cleaning sheet ( adhesive side up) through the scanner in portrait orientation until all residue is removed from the drive roll ers. 4. Adjust the feeder guides to[...]

A-61514 Sept ember 2004 27 Calibrating the scanner Calibration optimizes the optical system in your scanner in order to achieve the best overall quality of scanned im age s. Frequent ca libration is not needed or recommended. Calibr ation instruct ions can be foun d in the Image Processing Guide for Kodak i100 Seri es Scanners. A copy of this guide[...]

28 A-61514 September 2004 T roubleshooting Indicator light s There are two indicator light s — one red, o ne green — on the scanner that provides information about what the scanner is doing. Green on — scanner is r eady to scan Green flashing — scanner is busy Red on — an error condition exist s (refer to “Problem solving” in this sec[...]

A-61514 Sept ember 2004 29 Lamp s The scanner has a lamp saver fe ature to prolo ng lamp life. Th e lamps shut off afte r five minutes of scanner idle time. Clearing document jams 1. Remove any documents from the feed er area. 2. Lift up the scanner door release to unlatch the scanner d oor . 3. Pull up to open the scanner door . 4. Locate the jamm[...]

30 A-61514 September 2004 System is not responding If the scanner and/or host compu ter are not responding, perform the following steps. 1. Power down the compute r . 2. Power down the scan ner . 3. Disconnect the IEEE-1394 (FireWire) cable from the IEEE- 1394 port on the back o f the scanner . 4. Power up the computer . 5. Power up the scanner . A[...]

A-61514 Sept ember 2004 31 Problem solving Occasionally , you may experience a problem with your sc anner . In many cases, you can easily fix the proble m your self. T o perform suggested maintenance, refer to the Maintenance section. Y ou may als o need to check your scann ing application . Problem Possible Solution The scanner will not scan/ feed[...]

32 A-61514 September 2004 Problem Possible Solution Image quality is poor or has decreased Make sure that: • the scanner is clean. Refer to the Maintenance section. The lamps shut off too soon The lamps in the i100 Series Scanners will turn off af te r 5 minutes of no scanner activity . If the lamps are of f, but the sc anne r has not yet gone in[...]

A-61514 Sept ember 2004 33 T ransporting the scanner If it becomes necessary to transport th e scanner after inst allation, you mu st repack the scanner using the original p ackaging materials. If you do not have the original packaging materials, co ntact your supplier . 1. Power down the compute r . 2. Power down the scanner . 3. Disconnect the po[...]

A-61514 September 2004 A-1 Appendix A S pecifications Scanner T ype i150 Scanner: simplex co lor scanner with au tomatic document fe eder i160 Scanner: duple x color scann e r with automatic document feeder Image Capture Resolution 75 dpi to 300 dpi color and bi- tonal ADF Scanning Spee d i150 Scanner/i160 Scanner: 40 ppm: 200 dpi landscape A4 31 p[...]

A-2 A-61514 September 2004 Operating T emperature 15 to 35°C (59-95 °F) Humidity 15 to 76% (dry bulb) Power Consumpt ion i150/i160: <9.5W Heat Load 600 BTU Altitude Up to 2440 m (8000 f t) Acoustic No ise Data was me asured in accordance with DIN 45 635, ANSI S12.10-1985, and ISO 7779 in a se mi-anechoic chambe r . • Operating: < 60 dB ?[...]

A-61514 September 2004 B-1 Appendix B Supplies and Accessories Contact your sca nner supplier to order supplies. Item CA T No. Kodak Feeder Consu mables Kit for i100 Series Scanners (1 complete feed module, 1 complete se parato r module, 2 pre-separation pads, 24 roller tires) 124 1066 Kodak Extr a-Large Feed er Consumables Kit for i100 Series Scan[...]

A-61514 9/2004 © Eastman Kodak Company , 2004 CA T No. 126 4951 EASTMAN KODAK COMP ANY Document Imaging Rochester , New Y ork 14650 Kodak and Ektamate are trademarks of Eastman Kodak Company . Printed on recycled paper . DOCUM E N T IMAGING i100 Series Scanners User’ s Guide A-61514 Part No. 9E3718 CA T No. 126 4951 A61514 11/8/04 12:48 PM Page [...]