Lenovo L1900p manuale d’uso

L1 9 0 0p Flat Panel Monitor User ’ s Guide[...]

Product numbers 4431 - H E 1 First E d i t i o n ( O O O O O O O O O OCTOVE O FFFFF August 2008) 2 00 8 ) (c) Copyright Lenovo 200 8 . LENOVO products, data, computer software, and ser vices have been developed exclusively at pri vate expense and are sold to g overnmental entities as commercial items as defined by 48 C.F.R. 2.101 with limited and r[...]

Contents Safety information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i v Chapter 1. Getting started . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Shipping contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Product overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-[...]

Safety information Before installing this pr oduct, read the Safety Information. Antes de instalar este produto, leia as Informações de Segurança. Pred instal ací tohot o produktu si prectete pr ír ucku bezpecnostních instr ukcí. Læs sikkerhedsforskrifterne, før du installer er dette produkt. Ennen kuin asennat tämän tuotteen, lue turvao[...]

Shipping contents The product package should include the following items: v Setup Poster v Monitor Safety , T r oubleshooting, and Warranty Guide v Reference and Driver CD v Flat Panel Monitor v Power Cord v Analog Interface Cable- Attached to monitor © C opy r i ght L enov o 200 8 . 1-1 Chapter 1. Getting started T h i s U s er ’ s G u i d e co[...]

Product overview This section will provide information on carrying your monitor , adjusting monitor positions, tidying cables setting user controls, and using the cable lock slot. Carrying your monitor Y our monitor is equipped with an integrated handle for easy carrying. T ypes of adjustments Please see the illustration below for an example of the[...]

Chapter 1. Getting started 1-3 Height Adjustment After pressing the top of the monitor, remove the fix ed pin and adjust the height of the monitor . Monitor Piv ot 1. In locked/down Posi tion - T ilt upwards, so that lower edge of monitor clears the stand. - Rotate clockwise until the monit or stops at 90 °. 2. Extended Position - Rotate clockwise[...]

2 . Place the cables (just like Power cord, VGA cable, DVI Cable) through the Main Clip. Then fasten the clip. Wrap the Cable Wapper around the cables. 3 . 4 . Remove the four rubbers from the stand. 5 . Replace and fix the stand cover to cover the Cable s . 1-4 Flat Panel Monitor User ’s Guide[...]

Cable loc k slot Y our monitor is equipped with a cable lock slot locat ed on the rear of your monitor (in the lower right corner). Please see th e instructions that come with the cable lock to learn how to attach it. Setting up y our monitor This section provides information on ho w to set up your monitor . Connecting and turnin g on yo ur monitor[...]

4. Plug the monitor p ower cord and the comp uter cord into ground ed electrical outlets. 5. Power on the monito r and the computer . 1- 6 Flat Panel Monitor User ’s Guide[...]

6 . To install the monitor driver , insert the Reference and Driver CD , click Install driver , and follow the on-screen instr uctions. 7 . To optimize your monitor image, press the Automatic Image Setup key . Automatic image setup requir es that the monitor is warmed up for at least 15 minutes. This is not requir ed for normal operation. Note: If [...]

Chapter 2. Adjusting and using your monitor This section will give you information on adjusting and using your monitor . Comfort and accessibility Good ergonomic practice is important to get the most fr om your personal computer and to avoid discomfort. Arrange your workplace and the equipment you use to suit your individual needs and the kind of w[...]

v Use adequate lighting for the type of work you are performing. v Use the monitor brightness, contrast, and image adjustment controls, if equipped, to optimize the image on your screen to meet your visual pr eferences. v Keep your monitor screen clean so you can focus on the scr een’s contents. Any concentrated and sustained visual activity can [...]

Adjusting your monitor image This section describes the user control featur es used to adjust your monitor image. Using the direct access controls The direct access contr ols can be used when the On Screen Display (OSD) is not displayed. Note: T able 2-1. Direct access controls Using the On-Screen Display (OSD) controls The settings adjustable with[...]

2-4 Flat Panel Monitor User ’s Guide Table 2-2. OSD functions OSD Icon on Main Menu Submenu Description Brightness Adjusts overall brightness Brightness/Contrast Contrast Adjusts difference between light and dark areas Horizontal Position Moves the image left or right. Image Position Vertical Position Moves the image up or down. Automatic Automat[...]

T able 2-2. OSD functions (continued) OSD Icon on Main Menu Submenu Description Options Menu Position Menu position adjusts menu location on the screen. Default Default returns the menu position to the default settings. Custom v Horizontal: Changes the horizontal position of the OSD. v V ertical: Changes the vertical position of the OSD. v Save Fac[...]

The display modes shown below have been optimized at the factory . T able 2-3. Factory set display modes Understanding power management Power management is invoked when the computer recognizes that you have not used your mouse or keyboard for a user -definable period. There ar e several states as described in the table below . For optimal performan[...]

Caring for your monitor Be sure to turn of f the power before you perform any maintenance on the monitor . Do not: v Apply water or liquid directly to your monitor . v Use solvents or abrasives. v Use flammable cleaning materials to clean your monitor or any other electrical equipment. v T ouch the screen ar ea of your monitor with sharp or abrasiv[...]

Chapter 3. Reference information This section contains monitor specifications, instructions to manually install the monitor driver , troubleshooting information, and service information. Monitor specifications T able 3-1. Monitor specifications for type-model 6 4431 -xx1 © C opy r i ght L enov o 200 8 . 3-1 Dimensions Height W idth 378.7-488.7 mm [...]

T able 3-1. Monitor specifications for type-model 4431 -xx1(continued) Humidity Operating Storage Shipping 10% to 80% 5% to 95% 5% to 95% T roubleshooting If you have a problem setting up or using your monitor , you might be able to solve it yourself. Before calling your dealer or Lenovo, try the suggested actions that are appr opriate to your prob[...]

T able 3-2. T roubleshooting (continued) Problem Possible cause Suggested action Reference Screen is blank and power indicator is steady amber or flashing green The monitor is in Standby/Suspend mode v Press any key on the keyboard or move the mouse to restor e operation. v Check the Power Options settings on your computer . “Understanding power [...]

Manually installing the monitor driver Below are steps for m anually installing the m onitor driver in Microsoft W indows V ista, Microsoft. W indows XP . and Microsoft W indows 2000 Professional. Installing the monitor driver in W indows V ista T o install the dev ice driver in Microsoft® W indows V ista, do the following: Note : Y ou must downlo[...]

11. Select Install fr om a list or Specific location(Advanced) , and then click Next. 12. Select “ Don't sear ch. I will choose the driver to install ” option, and t hen click Next. 13. Click the Have Disk bu tton. Click on the Br owse button and navigat e to the following directory: X:Monitor DriversWindows XP & W indows 2000 (where[...]

Service information Product numbers The product number for your monitor is located on the side of the display bezel as shown below . Customer responsibilities The warranty does not apply to a product which has been damaged due to accident, misuse, abuse, improper installation, usage not in accor dance with product specifications and instr uctions, [...]

Service parts The following parts are for use by Lenovo service, or Lenovo authorized dealers, to support the customer warranty . Parts are for service use only . The table below shows information for model 4431 -xx1. Chapter 3. Reference information 3-7 T able 3-3. List of service parts FRU(Field Replaceable unit) Part number DESCRIPTION Machine T[...]

Appendix A. Service and Support The following information describes the technical support that is available for your product, during the warranty period or thr oughout the life of the product. Refer to your Lenovo Statement of Limited W arranty for a full explanation of Lenovo warranty terms. T elephone technical support Installation and configurat[...]

Country or Region T elephone Number Austria Up and running support: 01-24592-5901 W arranty service and support: 01-21 1-454-610 (German) Belgium Up and running support: 02-210-9820 (Dutch) Up and running support: 02-210-9800 (French) W arranty service and support: 02-225-361 1 (Dutch, French) Bolivia 0800-0189 (Spanish) Brazil Sao Paulo region: (1[...]

Country or Region T elephone Number Hungary +36-1-382-5720 India 1600-44-6666 Alternate T oll Free: +91-80-2678-8940 (English) Indonesia 800-140-3555 +62-21-251-2955 (English, Bahasa, Indonesian) Ireland Up and running support: 01-815-9202 W arranty service and support: 01-881-1444 (English) Italy Up and running support: 02-7031-6101 W arranty serv[...]

Country or Region T elephone Number Poland +48-22-878-6999 Portugal +351-21-892-7147 (Portuguese) Romania +4-021-224-4015 Russian Federation +7-095-940-2000 (Russian) Singapore 1800-3172-888 (English, Bahasa, Melayu) Slovakia +421-2-4954-1217 Slovenia +386-1-4796-699 Spain 91-714-7983 91-397-6503 (Spanish) Sri Lanka +94-1 1-2448-442 (English) Swede[...]

Appendix B. Notices Lenovo may not offer the pr oducts, services, or features discussed in this document in all countries. Consult your local Lenovo repr esentative for information on the products and services curr ently available in your area. Any refer ence to a Lenovo product, pr ogram, or service is not intended to state or imply that only that[...]

vary significantly . Some measurements may have been made on development-level systems and there is no guarantee that these measur ements will be the same on generally available systems. Furthermore, some measur ements may have been estimated through extrapolation. Actual r esults may vary . Users of this document should verify the applicable data [...]