LevelOne WBR-3400TX manuale d’uso

LevelOne WBR-3400TX 54Mbps Wireless AP Router w/ 4-port Switch User’s Manual Version:1.0[...]

Table of Contents CHAPTER 1 INTRODUCTION ............................................................................................. 1 LevelOne 54Mbps Wireless AP Router Features ........................................................... 1 Package Contents ..........................................................................................[...]

APPENDIX A TROUBLESHOOTING ................................................................................ 74 Overview ....................................................................................................................... ... 74 General Pr oblems .....................................................................................[...]

Chapter 1 Introduction This Chapter provides an overview of the LevelOne 54Mbps Wireless AP Router's features and capabilities. Congratulations on the purchase of y our new LevelOne 54Mbps Wireless AP Router. The LevelOne 54Mbps Wireless AP Router is a multi-funct ion device providing the foll owing services: • Shared Broadband Internet Acce[...]

LevelOne 54Mbps Wireless AP Router User Guide • Fixed or Dynamic IP Address. On the Internet (WAN port) connection, the LevelOne 54Mbps Wireless AP Router supports both Dy namic IP Address (IP Address is allocated on connection) and Fixed IP Address. Advanced Internet Functions • Conferencing & Telephony Applications. Internet Telephony and[...]

Introduction • Multi Segment LAN Support. LANs containing one or more segm ents are supported, via the LevelOne 54Mbps Wireless AP Rout er's RIP (Routi ng Information Prot ocol) sup- port and bu ilt-in static routing table. Configuration & Management • Easy Setup. Use your WEB browser from anywhere on t he LAN or WLAN for configu- rati[...]

LevelOne 54Mbps Wireless AP Router User Guide Physical Details Front Panel Figure 2: Front Panel Status (Red) LED On - Error condition. Off - Normal operation. Blinking - This LED blinks during start up. Power LED On - Power on. Off - No power. LAN LEDs For each port, there are 2 LEDs • Link/Act • On - Corresponding LAN (hub) port is active. ?[...]

Introduction Rear Panel Figure 3: Rear Panel Reset Button This button has two (2) functi ons: • Reboot . When pressed and released, the LevelOne 54Mbps Wireless AP Router will reboot (restart). • Clear All Data . This button can also be used to clear ALL data and restore ALL settings to the factory defaul t values. To Clear All Data and restore[...]

Chapter 2 Installation This Chapter covers the physical inst allation of the LevelOne 54Mbps Wire- less AP Router. Requirements • Network cables. Use standard 10/100BaseT network (UTP) cables wit h RJ45 connectors. • TCP/IP protocol m ust be installed on all PCs. • For Internet Access, an Internet Access account with an ISP, and either a DSL [...]

Installation For best Wireless reception and performance, the Access Point should be positioned in a central location w ith mini- mum obstructions betw een the Access Point and the PCs. Also, if using multiple Access Points, adjacent Access Points should use different Channels. 2. Connect LAN Cables Use standard LAN cables to connect PCs to the Swi[...]

Chapter 3 Setup This Chapter provides Setup details of the LevelOne 54Mbps Wireless AP Router. Overview This chapter describes the setup procedure for: • Internet Access • LAN configuration • Wireless setup • Assigning a Password to protect the confi guration data. PCs on your local LAN m ay also require configurati on. For details, see Cha[...]

Setup Where use of a certain feature requires that PCs or other LAN devices be configured, this is also explained in the relevant chapter. Configuration Program The LevelOne 54Mbps Wireless AP Router contains an HTTP server. Thi s enables you to connect to it, and configure it , using your Web Browser. Your Browser must support JavaScript . The con[...]

LevelOne 54Mbps Wireless AP Router User Guide If you can't connect If the LevelOne 54Mbps Wireless AP Router does not respond, check t he follow- ing: • The LevelOne 54Mbps Wireless AP Router is properl y installed, LAN connec- tion is OK, and it i s powered ON. You can test the connection by using the "Ping" comm and: • Open the[...]

Setup Setup Wizard The first tim e you connect to the LevelOne 54Mbps Wireless AP Rout er, the Setup Wizard will run automatically. (The Setup W izard will al so run if the LevelOne 54Mbps Wireless AP Router's default set ting are restored.) 1. Step through the Wizard until finished. • You need to know the type of Internet connection service[...]

LevelOne 54Mbps Wireless AP Router User Guide PPTP Mainly used in Europe. You connect to the ISP only when required. The IP address is usually allocated auto m ati- cally, but may be Static (Fixed). • PPTP Server IP Address. • User name and password. • IP Address allocated to you, if Static (Fixed). Other Modems (e.g. Broadband Wireless) Type[...]

Setup Home Screen After finishing the Setup W izard, you will see the Home screen. When you connect in future, you will see this screen when you connect . An example screen is shown below. Figure 5: Home Screen Navigation & Data Input • Use the menu bar on the top of t he screen, and the "Back" button on your Browser, for navigation[...]

LevelOne 54Mbps Wireless AP Router User Guide LAN Screen Use the LAN link on the main m enu to reach the LAN screen. The example screen is shown below. Figure 6: LAN Screen Data - LAN Screen TCP/IP IP Address IP address for the LevelOne 54Mbps Wireless AP Router, as seen from the local LAN. Use the default valu e unless the address is already in us[...]

Setup Cancel The "Cancel" button will d iscard any data you have entered and reload the file from t he LevelOne 54Mbps Wireless AP Router. DHCP What DHCP Does A DHCP (Dynami c Host Configuration Prot ocol) Server allocates a valid IP address to a DHCP Client (PC or device) upon request. • The client request is ma de when the client devi[...]

LevelOne 54Mbps Wireless AP Router User Guide Wireless Screen The Wireless Access Point settings must match the other W ireless stations. Note that the LevelOne 54Mbps Wireless AP Router will automatically accept both 802.11b and 802.11g connections, and no configura ti on is required for this feature. To change the LevelOne 54Mbps Wireless AP Rout[...]

Setup Options Channel No. • Select the Channel you wish to use on your Wireless LAN. • If you experience interference (shown by lost connections and/ or slow data transfers) you m ay need to experim ent with different channels to see which is the b est. • If using multiple Access Points, ad jacent Access Points should use different Channels t[...]

LevelOne 54Mbps Wireless AP Router User Guide Figure 8: WEP Screen Data - WEP Screen WEP Data Encryption Select the option to m atch other Wireless Stat ions: • Disabled - data is NOT encrypted before being transmitted. • 64 Bit - data is encrypted, using t he default key, before being transmitted. You must enter at least the default key. For 6[...]

Setup Password Screen The password screen allows you to assign a password to the LevelOne 54Mbps Wirele ss AP Router. Figure 9: Password Screen Once you have assigned a password to the Le velOne 54Mbps Wirele ss AP Router (on the Password screen above) you will be prompted for the password when you connect, as shown below. (If no password has been [...]

Chapter 4 PC Configuration This Chapter detail s the PC Configurat ion required on the local ("Int ernal") LAN. Overview For each PC, the following may need to be configured: • TCP/IP network settings • Internet Access configuration • Wireless configuration Windows Clients This section describes how to configure Windows clients for [...]

PC Configuration Checking TCP/IP Settings - Windows 9x/ME: 1. Select Control Panel - Net work . You should see a screen like t he following: Figure 11: Network Configuration 2. Select the TCP/IP protocol for your network card. 3. Click on the Properti es button. You should then see a screen li ke the following. Figure 12: IP Address (Win 95) Ensure[...]

LevelOne 54Mbps Wireless AP Router User Guide • On the Gateway tab, enter the LevelOne 54Mbps Wireless AP R outer's IP address in the New Gateway field and click Add , as shown below. Your LAN adm inistrator can advise you of the IP Address they assigned to the LevelOne 54M bps Wireless AP Router. Figure 13: Gateway Tab (Win 95/98) • On th[...]

PC Configuration Checking TCP/IP Settings - Windows NT4.0 1. Select Control Panel - Net work , and, on the Protocols tab, select the TCP/IP prot ocol, as shown below. Figure 15: Windows NT4.0 - TCP/IP 2. Click the Properties button to see a screen like the one below. 23[...]

LevelOne 54Mbps Wireless AP Router User Guide Figure 16: Windows NT4.0 - IP Address 3. Select the network card for your LAN. 4. Select the appropriate radi o button - Obtain an IP address from a DHC P Server or Specify an IP Address , as explained below. Obtain an IP address from a DHCP Server This is the default Windows setting. Using this is reco[...]

PC Configuration Figure 17 - Windows NT4.0 - Add Gateway 2. The DNS should be set to the address provided by y our ISP, as follows: • Click the DNS tab. • On the DNS screen, shown below, click the Add button (under DNS Service Search Order ), and enter the DNS provided by your ISP. 25[...]

LevelOne 54Mbps Wireless AP Router User Guide Figure 18: Windows NT4.0 - DNS 26[...]

PC Configuration Checking TCP/IP Settings - Windows 2000: 1. Select Control Panel - Ne twork and Dial-up Connect ion . 2. Right - click t he Local Area Connection icon and select Properties . You shoul d see a screen like the following : Figure 19: Network Configuration (Win 2000) 3. Select the TCP/IP protocol for your network card. 4. Click on the[...]

LevelOne 54Mbps Wireless AP Router User Guide Figure 20: TCP/IP Properties (Win 2000) 5. Ensure your TCP/IP settings are correct , as described below. Using DHCP To use DHCP, select the radio button Obtain an IP Address automaticall y . This is the default Windows setting. Using this is recommended . By default, the LevelOne 54Mbps Wireless AP Rout[...]

PC Configuration Checking TCP/IP Settings - Windows XP 1. Select Control Panel - Net work Connection . 2. Right click t he Local Area Connection and choose Properties . You should see a screen like the following: Figure 21: Network Configuration (Windows XP) 3. Select the TCP/IP protocol for your network card. 4. Click on the Properti es button. Yo[...]

LevelOne 54Mbps Wireless AP Router User Guide Figure 22: TCP/IP Properties (Windows XP) 5. Ensure your TCP/IP settings are correct. Using DHCP To use DHCP, select the radio button Obtain an IP Address automaticall y . This is the default Windows setting. Using this is recommended . By default, the LevelOne 54Mbps Wireless AP Router will act as a DH[...]

PC Configuration Internet Access To configure your PCs to use the LevelOne 54Mbps Wireless AP Router for Internet access: • Ensure that the DSL modem, Ca ble modem , or other permanent connect ion is functional. • Use the following procedure to configure y our Browser to access the Internet via the LAN, rather than by a Dial-up connection. For [...]

LevelOne 54Mbps Wireless AP Router User Guide Macintosh Clients From your Macintosh, you can access the Inte rnet via the LevelOne 54Mbps Wireless AP Router. The procedure is as follows. 1. Open the TCP/IP Control Panel. 2. Select Ethernet from the Connect via pop-up m enu. 3. Select Using DHCP Server from the Confi gure pop-up menu. The DHCP C lie[...]

PC Configuration Wireless Station Configuration This section applies to all W ireless stations wishing to use the LevelOne 5 4Mbps Wireless AP Router's Access Point, regardl ess of the operating system which is used on the clie nt. To use the Wireless Access Point in the Leve lOne 54Mbps Wireless AP Router, each Wireless Station must have comp[...]

Chapter 5 Operation and Status This Chapter details the operation of the LevelOne 54Mbps Wireless AP Router and the status screens. Operation Once both the LevelOne 54Mbps Wireless AP Router and the PCs are configured, opera- tion is automatic. However, there are some situations where add iti onal Internet configurat ion may be requi red: • If us[...]

Operation and Status Data - Status Screen Internet Connection Method This indicates the current connect ion method, as set i n the Setup Wizard. Internet IP Address This IP Address is allocated by the ISP (Internet Service Pro- vider). Connection Status Current connection status: • OK • No connection • Error If there is an error, you can clic[...]

LevelOne 54Mbps Wireless AP Router User Guide the following sections for details of each sub-screen. Access Log View details of outgoi ng connections to the inte rnet. System Data Display all sy stem inform ation in a sub-window. Refresh Screen Update the data displa yed on screen. Connection Status - PPPoE If using PPPoE (PPP over Ethernet), a scr[...]

Operation and Status • If the connection does not exist, the "Connect" butt on can be used to establish a connection. • If the conn ection currently exists, the "Disconnect" butto n can be used to break the connection. Connection Log Connection Log • The Connection Log shows status messages rela ting to the existing connec[...]

LevelOne 54Mbps Wireless AP Router User Guide Error: Invalid or unknown packet type The data received from the ISP' s Server could not be proc- essed. This could be caused by data corruption (from a bad link), or the Server using a protocol which is not supported by this device. Connection Status - PPTP If using PPTP (Peer-to-Peer Tunne ling P[...]

Operation and Status Connection Log Connection Log • The Connection Log shows status messages rela ting to the existing connection. • The "Clear Log" b utton will restart the Log, while the Refresh button will update the messages shown on screen. Buttons Connect If not connected, establish a connect ion to your ISP. Disconnect If conn[...]

LevelOne 54Mbps Wireless AP Router User Guide Default Gateway The IP Address of the remote Gatewa y or Router associated with the IP Address above. DNS IP Address The IP Address of the Domain Name Server which is currently used. DHCP Client This will show "Enabled" or "Disab led", depending on whether or not this device is funct[...]

Chapter 6 Advanced F eatures This Chapter explains when and how to use the LevelOne 54Mbps Wireless AP Router's "Advanced" Features. Overview The following advanced features are provided. • Advanced Internet • Communication Appli cations • Special Applications • DMZ • URL filter • Access Control • Remote Managem ent •[...]

LevelOne 54Mbps Wireless AP Router User Guide Figure 27: Internet Screen Conferencing & Telephony Most applications are support ed transparently by the Level One 54Mbps Wireless AP Router. But sometimes it is not clear which PC should receive an incoming connection. This problem could arise with the followin g Conferencing & Telephony appli[...]

Advanced Features Special Applications If you use Internet applicat ions which use non- standard connections or port numbers, you m ay find that they do not function correctly because they are bl ocked by the LevelOne 54Mbps Wireless AP Router 's firewall. In this case, you can define the app lication as a "Special Application". Spec[...]

LevelOne 54Mbps Wireless AP Router User Guide Data - Special Applications Screen Checkbox Use this to Enable or Disable th is Special Application as required. Name Enter a descriptive name to identify th is Special Application. Incoming Ports • Type - Select the protocol (TCP or UDP) used when you receive data from the special application or serv[...]

Advanced Features DMZ This feature, if enabled, all ows one (1) computer on your LAN to be exposed t o all users on the Internet, allowing unrest ricted 2-way com municati on between the "DMZ PC" and other Internet users or Servers. • This allows almost any applicatio n to be used on the "DMZ PC". • The "DMZ PC" wi[...]

LevelOne 54Mbps Wireless AP Router User Guide Data - URL Filter Screen Filter Strings Current Entries This lists any existing entries. If yo u have not entered any values, this list will be empty. Add Filter String To add an entry to th e list, enter it here, and click the "Add" button . An entry may be a Dom ain name (e.g. www.trash.com [...]

Advanced Features Access Control Screen To view this screen, select the Access Control link on the Advanced m enu. Figure 30: Access Control Screen Data - Access Control Screen Group Group Select the desired Group. The sc reen will update to display the settings for the selected Group. Groups are nam ed "Default", "Group 1", &qu[...]

LevelOne 54Mbps Wireless AP Router User Guide Internet Access Restrictions Select the desired options for t he current group: • None - Nothing is blocked. Use this to create the least restric- tive group. • Block all Internet access - All traffic via the WAN port is blocked. Use this to create the m ost restrictive group. • Block selected Ser[...]

Advanced Features Group Members Screen This screen is displayed when the Members button on the Access Control screen is clicked. Figure 31: Group Members Use this screen to add or remove m embers (PC s) from the current group. • The "Del >>" butto n will remove the selected PC (in the Members list) from the current group. • The [...]

LevelOne 54Mbps Wireless AP Router User Guide Default Schedule Screen This screen is displayed when the Define Schedule button on the Access Control screen is clicked. • This schedule can be (optionally) appli ed to any Access Control Group. • Blocking will b e performed during the scheduled time (between the "Start" and "Finish&[...]

Advanced Features Services Screen This screen is displayed when the Edit Service List button on the Access Control screen is clicked. Figure 33: Access Control - Services Data - Services Screen Available Services Available Services This lists all the available services. "Delete" button Use this to delete any Servi ce you have added. Pre-d[...]

LevelOne 54Mbps Wireless AP Router User Guide Cancel Clear the " Add New Service " area, ready for entering data for a new Service. Access Control Log To check the operation of the Access Control feature, an Access Control Log is provided. Click the View Log button on the Access Control screen to view this log. This log shows attempted In[...]

Advanced Features Remote Management This feature allows you to m anage the LevelOne 54Mbps Wireless AP Router vi a the Internet. Figure 34: Remote Management Screen Data - Remote Management Screen Remote Management Enable Remote Management Enable to allow management via the Internet. If Disabled, this device will ignore manageme nt connecti on atte[...]

LevelOne 54Mbps Wireless AP Router User Guide Virtual Servers This feature allows you to make Servers on your LAN accessible to Internet users. Norm ally, Internet users would not be able to access a server on your LAN because: • Your Server does not have a valid external IP Address. • Attempts to connect to devices on your LAN are blocked by t[...]

Advanced Features Virtual Servers Screen The Virtual Servers screen is reached by the Virtual Servers link on the Advanced screen. An example screen is shown below. Figure 36: Virtual Servers Screen This screen lists a num ber of pre-defined Servers, and allows you t o define your own Servers. Details of the selected Server ar e shown in the "[...]

LevelOne 54Mbps Wireless AP Router User Guide Buttons Defaults This will delete any Servers you h ave defined, and set the pre- defined Servers to use their default port num bers. Disable All This will cause the "Enable" setting o f all Virtual Servers to be set OFF. Add Add a new entry to the Virtu al Server list, using the data shown in[...]

Advanced Features Connecting to the Virtual Servers Once configured, anyone on the Internet can conn ect to your Virtual Se rvers. They must use the Internet IP Address (the IP Address allocat ed to you by your ISP). e.g. http://203.70.212.52 ftp://203.70.212.52 It is more convenient if you are using a Fixed IP Address from your ISP, rather than Dy[...]

LevelOne 54Mbps Wireless AP Router User Guide Dynamic DNS Screen Select Advanced on the main m enu, then Dynamic DNS , to see a screen like the following: Figure 37: DDNS Screen Data - Dynamic DNS Screen DDNS Service DDNS Service • You must sign up first to create a new account before usi ng the service. The service is free. • Click this link t[...]

Advanced Features Upgrade Firmware The firmware (software) in t he LevelOne 54Mbps Wireless AP Router can be upgraded using your Web Browser. You must first downl oad the upgrade file, then select Upgrade on the Advanced menu. You will see a screen like the following . Figure 38: Upgrade Firmware Screen To perform the Firmware Upgrade: 1. Click the[...]

Chapter 7 Advanced Configuration This Chapter explains the settings avail able via the Configur ation section of the "Advanced" menu. Overview Normally, it is not necessary to use these scr eens, or change any settings. These screens and settings are provided to deal with non-standard situations, or to provide additional options for advan[...]

Advanced Configuration PC Database The PC Database is used whenever you need to select a PC (e.g. for the "DMZ" PC). It elimi- nates the need to enter IP addresses. Also, y ou do not need to use fixed IP addresses on your LAN. PC Database Screen An example PC Data base screen is shown below. Figure 39: PC Database • PCs which are "[...]

LevelOne 54Mbps Wireless AP Router User Guide Buttons Add This will add the new PC to th e list. The PC will be sent a "ping" to determine it s hardware address. If the PC is not avail able (not con- nected, or not powered On) you will not be able to add it. Delete Delete the selected PC from the list. Thi s should be done in 2 situa- tio[...]

Advanced Configuration PC Database (Admin) This screen is display ed if the "Advanced Admini stration" button on t he PC Database is clicked. It provides m ore control than the standard PC Database screen. Figure 40: PC Database (Admin) Data - PC Database ( Admin) Screen Known PCs This lists all current entries. Data displayed is name (IP[...]

LevelOne 54Mbps Wireless AP Router User Guide MAC Address Select the appropriate opt ion • Automatic discovery - Select this to have the LevelOne 54Mbps Wireless AP Router contact the PC and fi nd its MAC address. This is only possibl e if the PC is connected to the LAN and pow- ered On. • MAC is - Enter the MAC address on the PC. The MAC addre[...]

Advanced Configuration Options This screen allows advanced users to enter or change a number of sett ings. For normal opera- tion, there is no n eed to use this screen or change any settings. An example Options screen i s shown below. Figure 41: Options Screen Data - Options Screen Backup DNS IP Address Enter the IP Address of the DNS (Domain Name [...]

LevelOne 54Mbps Wireless AP Router User Guide Allow Internet access to be disabled • If checked, then UPnP users can disable Internet access via this device. • If Disabled, UPnP users can NOT disable Internet access via this device. But currently, t his restriction onl y applies to users running Windows XP, who access the Properties via UPnP. ([...]

Advanced Configuration Logs The Logs record various types of activit y on the LevelOne 54Mbps Wireless AP Router. Thi s data is useful for troubleshooti ng, but enabling all logs will ge nerate a large amount of data and adversely affect performance. Since only a lim ited am ount of log data can be stored in t he LevelOne 54Mbps Wireless AP Router,[...]

LevelOne 54Mbps Wireless AP Router User Guide Send Select the desired option for sendi ng the log by E-ma il. • When log is full - The time is not fixed. Th e log will be sent when the log is full, which will depend on the volume of traf- fic. • Every day, Every Monday ... - The log is sent on the interval specified. • If "Ev ery day&quo[...]

Advanced Configuration MAC Address The MAC (hardware) address is a low-level network id entifier. It may be called "MAC Ad- dress", "Hardware Address", or "Physical Address" . On a PC, this address is associated with the Network card or adapter. The address on the MAC Address screen is the address on the Internet (WAN [...]

LevelOne 54Mbps Wireless AP Router User Guide If the MAC address is changed, the LevelOne 54Mbps Wireless AP Router must restart. Routing Overview • If you don't have other R outers or Gateways on your LAN, y ou can ignore the "Routing" page completely. • If the LevelOne 54Mbps Wireless AP Router is only acting as a Gat eway for [...]

Advanced Configuration Figure 44: Routing Screen Data - Routing Screen RIP Enable RIP Check this to enable the R IP (Routing Informat ion Protocol) feature of the LevelOne 54Mbps Wireless AP Router. The LevelOne 54Mbps Wireless AP Router supports R IP 1 only. Static Routing Static Routing Table Entries This list shows all entries in th e Routing Ta[...]

LevelOne 54Mbps Wireless AP Router User Guide Add Add a new entry to the Stati c Routing table, usi ng the data shown in the "Properties" area on screen. Th e entry selected in the list is ignored, and has no effect. Update Update the current Static Routing Table entry, usi ng the data shown in the "Properties" area on screen. D[...]

Advanced Configuration Static Routing - Example Figure 45: Routing Example For the LevelOne 54Mbps Wireless AP Router's Routing Table For the LAN shown above, with 2 routers and 3 LAN segm ents, the LevelOne 54Mbps Wire- less AP Router requires 2 entries as follows. Entry 1 (Segment 1) Destination IP Address 192.168.1.0 Network Mask 255.255.25[...]

74 A Appendix A T roubleshooting This Appendix covers the most likely probl ems and their solutions. Overview This chapter covers some common probl ems that m ay be encountered whil e using the Leve- lOne 54Mbps Wireless AP Router and som e possible soluti ons to them. If you fol low the suggested steps and the LevelOne 54Mbps Wi reless AP Router s[...]

Appendix A - Troubleshooting check your Internet connection (DSL/C able modem etc) to see that it is working correctly. Problem 2: Some applications do not run properly when using the LevelOne 54Mbps Wireless AP Router. Solution 2: The LevelOne 54Mbps Wireless AP Router processes the data passi ng through it, so it is not transparent. Use the Speci[...]

LevelOne 54Mbps Wireless AP Router User Guide should be shielded or relocated. • RF Shielding Your environment m ay tend to bl ock transmissi on between the wireless stations. This will mean high access speed is only possible when close to the Access Point. 76[...]

77 Appendix B About W ireless L ANs This Appendix provides some background informati on about using Wireless LANs (WLANs). B Modes Wireless LANs can work in either of two (2) m odes: • Ad-hoc • Infrastructure Ad-hoc Mode Ad-hoc mode does not require an Access Poin t or a wired (Ethernet) LAN. Wireless Sta- tions (e.g. notebook PCs with wireless[...]

LevelOne 54Mbps Wireless AP Router User Guide Channels The Wireless Channel sets the radio frequency used for com muni cation. • Access Points use a fixed Channel. You can se lect the Channel used. This allo ws you to choose a Channel which provides the least i nterference and best performance. In the USA and Canada, 11 channels are available. If[...]

79 C Appendix C Specifications LevelOne 54Mbps Wireless AP Router Model WBR-3400TX Dimensions 215mm (L) x 150mm (W) x 36mm (H) Operating Temperature 0 ° C to 40 ° C Storage Temperature -10 ° C to 70 ° C Network Protocol: TCP/IP Network Interface: 5 Ethernet: 4 * 10/100BaseT (RJ45) LAN connection 1 * 10/100BaseT (RJ45) for WAN LEDs 12 Power Adap[...]

LevelOne 54Mbps Wireless AP Router User Guide FCC Statement This equipment has been tested and found to com ply with the lim its for a Cl ass B digital device, pursuant to Part 15 of the FCC R ules. These limi ts are designed to provide reasonable protection again st harmful interference in a residential installation. This equipment generat es, use[...]