LevelOne WNC-0101USB manuale d’uso

1 Your Installation Guide to LevelOne WNC-0101USB 11Mbps Wireless USB Adapter[...]

1 Copyright Statement No part of this publication may be reproduced, stored in any retrieval system, or transmitted in any form or by any means, w hether electronic, mechanical, photocopying, recording or otherw ise without the prior writing of the publisher. Windows 95/98 and Window s 2000 are trademarks of Microsoft Corp. Pentium is trademark of [...]

2 Table of Contents 1. Welcome…………..………………………………………………4 1.1 Kit Contents ................................................................................ 6 1.2 Main Feature of LevelOne Wireless USB Adapter .................... 8 1.3 Wireless Networking Scena rios ..........................................[...]

3 5. Specifications………………………………………..…………..51 5.1 Physical Specifications ............................................................. 51 5.2 Available Channels in Each Country ....................................... 52 5.3 Networking Compliant Standards ............................................ 53 5.4 Opera[...]

4 1. Welcome Thank you for purchasing our LevelOne WNC-0101USB 11Mbps Wireless USB Adapter. It will be interoperable among IEEE 802.11b standard compliant products from other manufacturers and allows you to build a wireless LAN. Besides, you can use your PC to connect with an access point wirelessly to share the wired network resource. After instal[...]

5 The LevelOne WNC-0101USB 11Mbps Wireless USB Adapter provides LAN users with an access to real-time information anywhere in their organization. The mobility provides productivity and service, which are not available under wired networks. The LevelOne WNC-0101USB 11Mbps Wireless USB Adapter configuration is easy to change from peer-to-peer network[...]

6 1.1 Kit Contents The LevelOne WNC- 0101USB 11Mbps Wireless USB Adapter kit should include the following items: a. USB Adapter b. USB Cable.[...]

7 c. CD including: 1. LevelOne 11Mbps W ireles s USB Adapter Utility & Driver software 2. Acrobat Reader 4.05 3. User Manual PDF f ile d. Quick Start Guide e. The Us er’s Manual (this docum ent) If any of the items mentioned above are damaged or missing, please contact your distributor.[...]

8 1.2 Main Feature of LevelOne Wireless USB Adapter A. Power ON/OFF LED B. Status LED ! Off: No wireless activity ! Blinking: Sensing/transmitting wireless data ! Solid Yellow Green: Standard operational mode C. USB Connector[...]

9 USB WLAN Adapter features: 1. High-speed wireless connection, up to 11 Mbps 2. IEEE802.11b (DSSS) standard for 2.4 GHz W ireless LAN 3. Plug-and-Play installation 4. Solid design with an integrated antenna 5. Full mobility and seamless cell-to-cell roaming 6. Automatic scale back at per packet level USB WLAN Adapter supports: 1. Automatic load ba[...]

10 1.3 Wireless Networking Scenarios As our LevelOne Wireless USB Adapter is interoperable and compatible with other IEEE 802.11b compliant products from other manufacturers, it offers you the most freedom to establish your ideal w ireless netw ork. Therefore, after installing the LevelOne wireless USB adapter, y ou can connect your computer to: a.[...]

11 A. Peer-to-Peer Networking: An Ad Hoc Network could be easily set up with some PCs and the LevelOne wireless USB adapter(s) or our other WLAN device(s). Therefore, it is very suitable to build a network for temporary use, for example, for new sales point/branch, for demonstration in exhibition, and alike.[...]

12 B. Cooperate LAN (Local Area Networking): With some LevelOne Wireless USB Adapters and Access Points, it is easy to construct a LAN w ith access to Internet for enterprise use. The construction is quite easy that WLAN card and Access Point will automatically work at the most suitable frequency when Access Point is set w ithin the proper range. I[...]

13 1.4 Advantages for Using Wireless Network The LevelOne 11Mbps Wireless USB Adapter can wirelessly transmit and receive data, minimizing the need for wired connections, at a speed of up to eleven megabit per second. With a LevelOne 11Mbps Wireless USB Adapter you can locate your PC wherever y ou want w ithout wires and cables. The LevelOne 11Mbps[...]

14 Flexible Workgroups and Lower Cost : For workspaces that are frequently reconfigured for temporarily use such as demo in exhibitions, wireless networking is easy to set up of lower total cost—and all equipments are recyclable. You do not have to remove the old wires and then build up the new ones again and again. Networked Conference Rooms : U[...]

15 2. Quick Start to Wireless Networking 1. Insert the installation CD, and it will automatically start the setup program for WLAN Utility and driver. 2. Follow the installation wizard to complete the software installation process, and then reboot your PC/notebook after the software installation is done. (See P.19~23: Step 2~8)[...]

16 3. After restarting your PC/notebook, insert USB adapter into USB connector of the notebook or desktop. 4. Operation System will detect new device and prompt the driver automatically.[...]

17 5. Double click the shortcut icon of WLAN USB, and then check the toolbar at the bottom of the screen—there is a small icon to indicate the connection status. Red color means no connection and green color means connected (If red color appears, please repeat from step1). 6. Please choose “Infrastructure” mode and type “WLAN” in SSID col[...]

18 7. Now y ou may enter “Internet Explorer” to surf the Internet. Freely without w ires[...]

19 3. Step-by-Step Installation Guide This section will lead you through the installation of the LevelOne Wireless USB Adapter and its software in details. People who are familiar with the installation and settings of wireless device may refer to quick start guide for to establish a network in a snap. To establish your wireless network connection, [...]

20 3.1 Install the LevelOne Wireless USB Adapter Utility / Driver NOTE: Please install the LevelOne 11Mbps Wireless USB Adapter Utility / Driver first prior to inserting the LevelOne 11Mbps Wireless USB Adapter. 1. Insert the LevelOne Wireless USB Adapter installation CD into your CD-ROM drive. The setup program will then automatically start. 2. As[...]

21 3. Please select the applications you would like to install, and click “Next“. To go on the installation, please select “Install LevelOne 11Mbps Wireless USB Adapter Driver and Utility” and then go on to Step 4. If you select “Browse User Manual“, system will prompt a message to suggest you install the Acrobat Reader—please go on t[...]

22 4. The default destination folder is displayed in the setup dialog column. You may change the default folder by clicking “Browse“ to select the destination folder you prefer. Click “ Next “ to go to the next screen.[...]

23 5. Select the Program Folder for LevelOne 11Mbps Wireless USB Adapter Utility and click “Next “. 6. You will be asked if you wish to add a shortcut of LevelOne 11Mbps Wireless USB Adapter Utility to your desktop. Click “ Yes “.[...]

24 7. The user manual is published in Portable Document Format (PDF). If Acrobat Reader does not exist in your system, the following message will be prompted to automatically enter the Acrobat Reader installation screen. Please follow the instructions to complete the Acrobat Reader 4.05 installation. 8. The Driver and Help files will be copied to t[...]

25 3.2 Install the LevelOne Wireless USB Adapter NOTE: The LevelOne 11Mbps Wireless USB Adapter driver and utility are included in the accompanying installation CD. Please follow the installation procedures in Section 3.1. (Your USB Adapter will not work properly if the driver and utilities are not installed correctly.) 1. After completing the soft[...]

26 2. After connecting the USB Adapter to your PC/notebook, the setup will automatically start. NOTE: If you are asked to insert a “ Wi ndows 98 CD-ROM“ during the installation, insert your “ Wi ndows 98 CD-ROM“ and click “Yes“. Once the setup task is completed, the “ Microsof t Inte rnet Ex plore r “ should start up. Please close i[...]

27 3.3 LevelOne Wireless USB Adapter Utility LevelOne Wireless USB Adapter has its own management software, named “LevelOne 11Mbps Wireless USB Adapter Utility”, and users can control all functions provided with it. The Utility icon will appear in the taskbar by clicking the LevelOne 11Mbps Wireless USB Adapter Utility shortcut on your desktop.[...]

28 3.3.1 Setting • Operating Mode: If you want to connect to an Access Point, please set the mode as ”Infrastructure”. If you have more stations and just want to set them as a local network, please set the Mode as ” 802.11 Ad Hoc”. • Channel: It shows the radio channel number that is used for networking. The Channel number must be the s[...]

29 • MAC Address: It displays the MAC address of your IEEE802.11b USB device, and the parameter can not be changed. • Other information: The Signal Strength and Link Quality will be shown in the screen below under the Status of your USB adapter, • Status: If you set the operation mode as “802.11 Ad Hoc“ , the Status column will show the ?[...]

30 3.3.2 Statistics • The following screen shows various statistics including the Data Packets, Management Packets and Rejected Packets in transmitting and receiving status. • You can click the “Clear” button to reset the statistics data.[...]

31 3.3.3 Site Survey • The screen shows the messages of all the Access Points within the communication range of your LevelOne wireless USB Adapter. The messages include BSSID, SSID, Signal, the Channel used by each AP, and the Encryption status (enabled or not). • You can click the Rescan button to search the new AP. • You can double-click th[...]

32 3.3.4 Encryption You may enhance the security level of wireless network by enabling the Encryption function. • WEP Key to use: You can choose one of the four Keys you typed (Key1~Key4) as the WEP Key. • WEP Mode: If you set the Mode Optional, your device can communicate with the stations with disabled WEP. Otherwise, if you set the Mode Mand[...]

33 ! Caution: WEP Key needs to be the same for all IEEE802.11b compliant stations. Follow the steps below to set your WEP: (1) Select the Encryption type: 64bit or 128bit. (2) Type WEP Key: If you select 64bit, you must type 10 values in the following range (0~F) from Key1 to Key 4 space. Besides, if you select 128bit, you must type 26 values (0~F)[...]

34[...]

35 3.3.5 Advanced • The screen shows the advanced setting of the LevelOne 11Mbps Wireless USB Adapter Utility, and it includes Preamble Type, Fragmentation Threshold, and RTS / CTS Threshold. We suggest using the default settings—Preamble Type: Long. • You may change the Preamble Type by ticking the two options: “Long” or “Short”. •[...]

36 • After adjusting the settings, please click on the “Submit” button to save all the settings.[...]

37 3.3.6 Version • The screen shows the version of Driver, Firmware, and Application for LevelOne 11Mbps Wireless USB Adapter Utility / Driver.[...]

38 3.4 Remove your USB Adapter If you do not need the wireless connectivity of your LevelOne Wireless USB Adapter, you can unplug and remove your USB adapter directly. ! Caution: When removing the LevelOne Wireless USB Adapter, you will lose your connection to the network. Make sure you have closed all files and network applications (such as e-mail[...]

39 3.5 Uninstall the LevelOne Wireless USB Adapter Utility / Driver If you do not need the wireless connectivity of your LevelOne Wireless USB Adapter. 1. First you should disconnect and remove the LevelOne Wireless USB Adapter. (See 3.4) 2. To uninstall the LevelOne 11Mbps Wireless USB Adapter Utility and Driver, please follow the process as follo[...]

40 3. You will be asked if you are sure to uninstall the LevelOne 11Mbps Wireless USB Adapter Utility and all of its components. Click “Yes” to run the un-installation or click “No” to exit. 4. Now the un-installation is completed. Please click “Finish”.[...]

41 4. Network Application This section consists of the network applications of the LevelOne Wireless USB Adapter, including: z How to Survey the network neighborhood z How to Share Your Folder w ith Your Netw ork Member(s) z How to Share Your Printer w ith Your Netw ork Member(s) z How to Access the Shared Folder(s)/File(s) of Your Netw[...]

42 4.1 Surveying the Network Neighborhood When multiple base stations are up and running in your wireless network, you can use the procedure described below to display the other computers: 1. Start Windows Explorer. 2. Scroll down the list of files and folders to look for the item Netw ork Neighborhood. 3. Double-click the Network Neighborhood item[...]

43 z Powered up and logged on to the network. z Configured to operate with identical Microsoft Network settings concerning:  Networking Protocol.  Wireless Network Name. To enable the sharing of Internet access, you should set your LevelOne 11Mbps Wireless USB Adapter mode as “Infrastructure“ and connect to the access point. W[...]

44 4.2 File Sharing in Microsoft Windows 98SE The LevelOne 11Mbps W ireless USB Adapter allows the sharing of files between computers that are logged onto the same wireless network. If you want to share your folder “ M y Documents” with other computers of the wireless network, please follow the steps below: 1. First, locate the folder “My Doc[...]

45 3. Select “Shared As” to open your folder for file sharing. You can also select and define the level of access for your folder. • If “Read-Only” is selected, the other users in the wireless network can only copy files from your folder. Neither copying files into your folder nor any change of files is allowed. • If “Full” is selec[...]

46 • You can also set the option to “Depends on Password” wherein the other users in the wireless network can access to your folder through a set password. The set password will determine if the user can only read your folder or has full access to your folder. 4. Click “Apply” or “OK” to activate the options that you have set. Now you[...]

47 4.3 Printer Sharing in Windows 9 8 SE In order to share your printer with other stations of the same across the network, you have to set it as a network printer—the instructions are as follows: 1. Click the “ Start” button, point to the “ Settings” , and then click “ Printers” . 2. In the Printers window, click the printer you want[...]

48 4. Click the Sharing tab, and then click “Shared As”. If necessary, enter a password.[...]

49 4.4 Using the Shared Folder If you would like to access a shared folder stored in other stations of same network, please follow the process below: 1. Double-click the “Network Neighborhood” icon, and then double-click the computer where the shared folder is located. 2. Double-click the folder you want to connect to. 3. Now you may open the n[...]

50 4.5 Using the Shared Network printer To use the shared network printer(s), please refer to the following process: 1. In the “Network Neighborhood”, locate and double-click the computer where the printer you want to use is located. 2. Double-click the printer icon in the window. 3. To set up the printer, follow the instructions on the screen.[...]

51 5. Specifications 5.1 Physical Specifications Dimensions (L x W x H) 120 X 77 x 25mm Weight 80g Host Interface USB 1.1 Compliant Antenna Internal Patch Antenna Supporting Diversity Status Indicator LED (Indicates RF/Link Activity)[...]

52 5.2 Available Channels in Each Country[...]

53 5.3 Networking Compliant Standards Standard IEEE802.11b W i-Fi Compliment Host Systems W indows98SE/2000/ME Media Access Protocol CSMA/CA with ACK Network Protocol TCP / IP, IPX, NetBEUI[...]

54 5.4 Operating Specifications Frequency Band 2.400 ~ 2.4835GHz (subject to local regulations) Number of Channel: USA and Canada -11 Most France -4 European countries -13 Operating Voltage: 5V Spreading: DSSS (Direct Sequence Spread Spectrum) Date rate: 11Mbps, 5.5Mbps, 2Mbps, 1Mbps Nominal Temp Range: 17 dBm Transmit Power: Extended Temp Range: 1[...]

55 Receive Sensitivity: Nominal Temp Range: -1 Mbps 10 -5 BER @ -90 dBm, minimum -5.5 Mbps 10 -5 BER @ -87 dBm, minimum -11 Mbps 10 -5 BER @ -84 dBm, minimum Extended Temp Range: -1 Mbps 10 -5 BER @ -84 dBm, minimum -5.5 Mbps 10 -5 BER @ -81 dBm, minimum -11 Mbps 10 -5 BER @ -78 dBm, minimum Modulation: 11 Mbps and 5.5 Mbps CCK; 2 Mbps: DQPSK; 1Mbp[...]

56 Operating Range: Open Space: 100 - 300m; Indoor: 35m - 100m Roaming: Full mobility and seamless roaming from cell to cell and across access points (subject to access point) Management Utility: Link Configu re for network join and diagnostics EMC certification: FCC part 15 class in US, ETSI 300.328 and CE EMC-EEC in Europe Warranty: 1 year, optio[...]

57 6. Troubleshooting If you encounter some problems while installing the LevelOne Wireless USB Adapter or you want to confirm whether the USB Adapter is installed properly or not, please refer to the procedure below after you have installed the USB Adapter.[...]

58 6.1 Check the Various Properties of the LevelOne 11Mbps Wireless USB Adapter To verify if the driver has been set in your computer properly, you can follow the procedures below. • Right-click “My Computer” and then select “Properties”; then you will enter your system properties. Select the Device Manager and click the Network Adapter. [...]

59 • If there is a Question-mark (?) or an Exclamation-mark (!) in yellow on your LevelOne Wireless USB Adapter in the previous picture, please make sure you have inserted the right USB Adapter, and installed the proper driver and utility as well. If you are not sure, you may follow the procedure below to reinstall (update) the driver. a. Enter ?[...]

60 6.2 Microsoft Networking Checklist In order to run the LevelOne 11Mbps Wireless USB Adapter properly, some network items must be presented in the Microsoft “Network Neighborhood” setup. To check and activate the network setup, right-click the “Network Neighborhood“ and select “Properties”. The following items should be presented in t[...]

61 Set up the Network Protocols : • Refer to the picture above—Click “Add“ button to enter the windows displayed below.[...]

62 • Click “Add“ and then choose the network protocol. Select Microsoft as the manufacturer and pick “NetBEUI“, “TCP/IP“, and “IPX/SPX-compatible“ for the network protocols. After all, click “OK“. • Now your network protocol should be set. Please check if your network needs any special requirements to operate in your office [...]

63 Network Service for Microsoft Networking: • Click “Add“ and select “Service“.[...]

64 • Select “Microsoft” as the manufacturer and choose “File and printer sharing for Microsoft Networks” for network service; • Click “OK” to set the network service.[...]

65 6.3 Others Additional Note for Windows 98 earlier edition If your system is running Windows 98 first edition, you may use one of the following ways to make IEEE 802.11b WLAN Utility work properly. 1. Copy and replace the file MFC42.dll from c:windowssystem of Windows 98SE to the same directory of your Windows 98 first edition. 2. Upgrade your [...]

66 Regulatory Information The manufacturer is not responsible for any radio or television interference caused by unauthorized modification of this device or the substitution or attachment of connecting cables and equipment other than specified. The correction of interference caused by such unauthorized modification, substitution or attachment will [...]

67 USA – Federal Communications Commission (FCC) This equipment has been tested and found to comply with the limits for Class B Digital Devices, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate[...]

68 Canada – Industry Canada (IC) This class B digital apparatus meets all requirements of the Canadian Interference Causing Equipment Regulations. EU Declaration of Conformity (Europe) USB adapter conforms to the specifications listed below, following the provisions of the Low Voltage Directive 73/23/EEC and the EMC Directive 89/336/EEC Safety EN[...]

69[...]