LG Electronics 20LC1R manuale d’uso

LCD TV Please read this manual car efully before operating your set. Retain it for future r eference. Record model number and serial number of the set. See the label attached on the back cover and quote this information to your dealer when you r equire service. OWNER’S MANUAL MODELS: 15LS1R * 20LS1R * 20LS2R * 23LS2R * 15LC1R * 20LC1R * Downloade[...]

Contents Installation 3 Location and function of controls 8 Remote control handset Battery installation / Front / Rear Basic operation 14 On and off On-Screen Menu Language/Country Selection On screen menus 15 Menu selection / Programme selection V olume adjustment Setting up TV stations 16 Auto programme tuning Manual programme tuning Programme ed[...]

3 ENGLISH Installation Stand Installation 1. Assemble parts of stand body with cover base of the stand. Insert stand body into a cover base until clicking sound. 2. Carefully place the product screen side down on a cushioned surface that will protect product and screen from damage. 3. Place the product stand on the product as shown. Note: Here show[...]

Installation 4 Basic connection 1. Connect the cables as necessary . T o connect an additional equipment,see the Connection of external equipment section. 2. Install the Cable management as shown. Note: Here shown may be somewhat different from your set. Connection of TV 1. Connect the aerial cable to the socket marked ANTENNA IN on the back. For t[...]

5 ENGLISH Installation How to remove the Cable management First, press the cable management. Hold the Cable management with both hands and pull it upward. Note: Do not hold the CABLE MANAGEMENT when moving the product. (If the product is dropped,you may be injured or the product may be broken.) W all Mount: Horizontal installation 4 inches 4 inches[...]

6 Installation Positioning your display Adjust the position of the panel in various ways for maximum comfort. 10~12 3 0 • Tilt range Location Position your set so that no bright light or sunlight falls directly onto the screen. Care should be taken not to expose the set to any unnecessary vibration, moisture, dust or heat. Also ensure that the se[...]

Installation 7 ENGLISH Kensington Security System - The TV is equipped with a Kensington Security System connector on the back panel. Connect the Kensington Security System cable as shown below . - For the detailed installation and use of the Kensington Security System, refer to the user ’s guide provided with the Kensington Security System. For [...]

8 Location and function of controls [without ARC] 12 3 45 6 8 79 0 OK LIST MUTE VOL HOLD SIZE MIX TIME REVEAL MODE UPDA TE INDEX VOL PR PR TEXT PSM SSM Q.VIEW POWER TV INPUT M ENU SLEEP I/II A R C ? i M 10 12 13 14 15 9 3 4 5 6 7 8 1 2 11 16 13 [with ARC] [with ARC] OK MUTE VOL VO L PR PR TEXT PSM SSM M ENU SLEEP I/II * [without ARC] SSM PSM 0 SLEE[...]

9 ENGLISH Location and function of controls All the functions can be controlled with the remote control handset. Some functions can also be adjusted with the buttons on the top panel of the set. Only the remote control handset supplied will operate this set. Remote control handset Before you use the remote control handset, please install the batter[...]

10 Location and function of controls 8 7 8 7 1. ON/OFF ( r r / I) switches the set on from standby or off to standby . 2. INPUT selects the remote operating mode. switches the set on from standby . 3. MENU selects a menu. 4. OK accepts your selection or displays the current mode. 5. F F / G G (V olume Down/Up) adjusts the volume. adjusts menu setti[...]

Location and function of controls 11 ENGLISH H/P RGB(PC/DTV) IN ANTENNA IN AUDIO (RGB) IN S-VIDEO AV IN 2 VIDEO H/P SERVICE ONL Y ANTENNA IN S-VIDEO A V IN 2 VIDEO AV 1 AV 1 15LS1R * 20LS1R * Rear AC INPUT AUDIO/VIDEO INPUT PC INPUT JACK PC SOUND INPUT ANTENNA INPUT EURO SCART SOCKET S-VIDEO INPUT HEADPHONE JACK AC INPUT AUDIO/VIDEO INPUT FOR SERVI[...]

12 Location and function of controls H/P RGB (PC/DTV) IN ANTENNA IN AUDIO (RGB/DVI) IN AV 1 S-VIDEO AV IN 2 VIDEO LR AUDIO YP B P R LR VIDEO COMPONENT IN AUDIO HDMI/DVI IN H/P RGB (PC/DTV) IN ANTENNA IN AUDIO (RGB/DVI) IN AV 1 S-VIDEO AV IN 2 VIDEO LR AUDIO YP B P R LR VIDEO COMPONENT IN AUDIO HDMI/DVI IN RS-232C (SERVICE ONL Y) 20LS2R * / 23LS2R *[...]

13 ENGLISH Location and function of controls H/P RGB(PC/DTV) IN ANTENNA IN AUDIO (RGB) IN S-VIDEO AV IN 2 VIDEO H/P SERVICE ONL Y ANTENNA IN S-VIDEO A V IN 2 VIDEO AV 1 AV 1 15LC1R * 20LC1R * Rear AC INPUT AUDIO/VIDEO INPUT PC INPUT JACK PC SOUND INPUT ANTENNA INPUT EURO SCART SOCKET S-VIDEO INPUT HEADPHONE JACK AC INPUT AUDIO/VIDEO INPUT FOR SERVI[...]

14 Basic operation On and off 1 . Press the POWER , D D / E E , TV , INPUT or NUMBER buttons to switch it on fully . 2. Press the POWER button. The set reverts to standby mode. 3. Pull out mains plugs to switch the set off. Note : If, while the set is switched on, the mains plug is disconnected the set will switch to standby or power on when the ma[...]

15 ENGLISH Menu selection 1 . Press the MENU button and then D D / E E button to display each menu. 2. Press the G G button and then D D / E E button to select a menu item. 3. Change the setting of an item in the sub or pull-down menu with F F / G G button. Y ou can move to the higher level menu by pressing the OK button and to move to the lower le[...]

16 Setting up TV stations Up to 100 TV stations can be stored by programme numbers (0 to 99). Once you have preset the stations, you will be able to use the D D / E E or NUMBER buttons to scan the stations you have programmed. Stations can be tuned using automatic or manual modes. Auto programme tuning All stations that can be received are stored b[...]

17 ENGLISH Manual programme tuning Manual programme lets you manually tune and arrange the stations in whatever order you desire. Also you can assign a station name with five characters to each programme number . 1. Press the MENU button and then D D / E E button to select the Station menu. 2. Press the G G button and then D D / E E button to selec[...]

18 Setting up TV stations Station DE F G OK MENU Auto programme Manual programme Programme edit Favourite programme Assigning a station name 1. Repeat the ‘ Manual programme tuning ’ steps 1 to 2. 2. Press the G G button and then D D / E E button to select Name . 3. Press the G G button and then use the D D / E E . Y ou can use a blank, + , - ,[...]

19 ENGLISH Programme edit This function enables you to delete or skip the stored programmes. Also you can move some stations to other programme numbers or insert a blank station data into the selected programme number . 1. Press the MENU button and then D D / E E button to select the Station menu. 2. Press the G G button and then D D / E E button t[...]

20 Setting up TV stations Favourite programme This function lets you select your favourite programmes directly . 1. Press the MENU button and then D D / E E button to select the Station menu. 2. Press the G G button and then D D / E E to select Favourite programme . 3. Press the G G button a nd then F F / G G button to select On or Off . 4. Press t[...]

21 ENGLISH PSM (Picture Status Memory) 1. Press the MENU button and then D D / E E button to select the Picture menu. 2. Press the G G button and then D D / E E button to select PSM . 3. Press the G G button and then D D / E E button to select a picture set- ting on the PSM menu. 4. Press the OK button. 5. Repeatedly press the MENU button to return[...]

22 Picture adjustment CSM (Colour Status Memory) Selecting a factory setting colour set. 1. Press the MENU button and then D D / E E button to select the Picture menu. 2. Press the G G button and then D D / E E button to select CSM . 3. Press the G G button and then D D / E E button to select a color set- ting on the CSM menu: Cool , Normal , W arm[...]

23 ENGLISH XD function XD is LG electronic's unique picture improving technology to display a real HD source through an advanced digital signal processing algorithm. 1. Press the MENU button and then D D / E E button to select the Picture menu. 2. Press the G G button and then D D / E E button to select XD . 3. Press the G G button and then D [...]

24 Picture adjustment Cinema Set up the TV for the best picture appearance for viewing movies. 1. Press the MENU button and then D D / E E button to select the Picture menu. 2. Press the G G button and then D D / E E button to select Cinema . 3. Press the G G button and then D D / E E button to select On or Of f . 4. Repeatedly press the MENU butto[...]

25 ENGLISH Sound adjustment SSM (Sound Status Memory) Y ou can select your preferred sound setting; Flat, Music, Movie or Sports and you can also adjust the sound frequency of the equalizer . 1. Press the MENU button and then D D / E E button to select the Sound menu. 2. Press the G G button and then D D / E E button to select SSM . 3 . Press the G[...]

26 Sound adjustment Stereo/Dual reception When a programme is selected, the sound information for the station appears after the programme number and station name disappear . Mono sound selection In stereo reception if the stereo signal is weak, you can switch to mono by pressing the I/II button twice. In mono reception the depth of sound is improve[...]

27 ENGLISH Clock Y ou must set the time correctly before using on/off time function. 1. Press the MENU button and then D D / E E button to select the Time menu. 2. Press the G G button and then D D / E E button to select Clock. 3. Press the G G button and then D D / E E button to adjust the hour . 4. Press the G G button and then D D / E E button t[...]

28 Auto sleep If you select On on the Auto sleep menu, the set will automatical- ly switch itself to standby mode approximately ten minutes after a TV station stops broadcasting. 1. Press the MENU button and then D D / E E button to select the Time menu. 2. Press the G G button and then D D / E E button to select Auto sleep . 3. Press the G G butto[...]

29 ENGLISH Other functions Child lock The TV can be set so that the remote control handset is needed to control it. This feature can be used to prevent unauthorized view- ing. 1. Press the MENU button and then D D / E E button to select the Special menu. 2. Press the G G button and then D D / E E button to select Child lock . 3. Press the G G butto[...]

30 Other functions XD Demo Use it to see the difference between XD Demo on and XD Demo off. 1. Press the MENU button and then D D / E E button to select the Special menu. 2 . Press the G G button and then D D / E E button to select XD Demo . 3. Press the G G button to begin XD Demo. 4. Press the MENU button to return to normal TV viewing. Note: a. [...]

31 ENGLISH Other functions TV , A V and PC modes Press the INPUT button and then D D / E E button to select desired mode. Inputs can be set for TV , A V or PC mode. A V mode is used when a video cassette recorder (VCR), or other equipment is connected to the set. Note : When a VCR is connected via the aerial socket the set is used in TV mode. See t[...]

32 - This feature is not available in all countries. T eletext (or TOP text) is an optional function, therefore only a set with the teletext system can receive the teletext broadcast. T eletext is a free service broadcast by most TV stations which gives up- to-the-minute information on news, weather , television programmes, share prices and many ot[...]

33 ENGLISH T eletext TOP text The user guide displays four fields-red, green, yellow and blue at the bottom of the screen. The yellow field denotes the next group and the blue field indicates the next block. Block / group / page selection 1. With the blue button you can progress from block to block. 2. Use the yellow button to proceed to the next g[...]

34 Y ou can connect additional equipment, such as VCRs, camcorders etc. to your set. Examples are shown below . Note: Here shown may be somewhat different from your set. Aerial socket 1. Connect the RF out socket of the VCR to the aerial socket of the set. 2. Connect the aerial cable to the RF aerial in socket of the VCR. 3. Store the VCR channel o[...]

35 ENGLISH Connection of external equipment S-Video/Audio in sockets (S-V ideo) When connecting an S-VIDEO VCR to the S-VIDEO socket, the picture quality will be further improved. 1. Connect the S-Video socket of the VCR to the S-VIDEO socket of the set. 2. Connect the audio cable from the S-VIDEO VCR to the AUDIO sockets of the set. 3. Press the I[...]

36 DTV in sockets RGB in socket (15LS1R * /15LC1R * / 20LS2R * / 23LS2R * ) 1. Connect the SET T OP with the D-Sub output socket to RGB (PC/DTV) IN socket on the set and audio cable of the SET TOP to the AUDIO (RGB) IN (15LS1R * / 15LC1R * ) or AUDIO (RGB/DVI) IN (20LS2R * / 23LS2R * ). 2. Press the INPUT button to select RGB (or RGB [DTV] ) (576p/[...]

37 ENGLISH Connection of PC PC in socket RGB in socket (15LS1R * /15LC1R * / 20LS2R * / 23LS2R * ) 1. Connect the signal cable from the monitor output socket of the PERSONAL COMPUTER to the PC input socket of the set. 2. Connect the audio cable from the PC to the AUDIO (RGB) IN (15LS1R * / 15LC1R * ) or AUDIO (RGB/DVI) IN (20LS2R * / 23LS2R * ) soc[...]

38 Connection of PC PC Setup Y ou can adjust auto configure, manual configure and reset as you prefer . 1. Press the INPUT button and then D D / E E button to select the RGB [PC] . 2. Press the MENU button and then D D / E E button to select the Screen menu. 3. Press the G G button and then D D / E E button to select the desired screen function. 4.[...]

39 ENGLISH Connection of PC Selecting wide XGA mode T o see a normal picture, match the resolution of RGB mode and selection of XGA mode. 1. Press the MENU button and then D D / E E button to select the Screen menu. 2. Press the G G button and then D D / E E button to select XGA mode . 3. Press the G G button and then D D / E E button to select the[...]

40 Picture format Y ou can watch TV in various picture formats; Spectacle , Original, 4:3, 16:9, 14:9, Zoom1, Zoom2. Repeatedly press the ARC button to select your desired picture format. Spectacle When your TV receives the wide screen signal, it will lead you to adjust the picture horizontally , in a nonlinear proportion, to fill the entire screen[...]

41 ENGLISH T roubleshooting Checklist The video function does not work. No picture & No sound No or poor color or poor picture • Adjust Color in menu option. • Keep a sufficient distance between the product and the VCR. • T ry another channel. The problem may be with the broadcast. • Are the video cables installed properly? • Activate[...]

42 T roubleshooting Checklist The audio function does not work. Picture OK & No sound • Press the VOL (or V olume) button. • Sound muted? Press MUTE button. • T ry another channel. The problem may be with the broadcast. • Are the audio cables installed properly? Unusual sound from inside the product • A change in ambient humidity or t[...]

43 ENGLISH Product Specifications * The specifications shown above may be changed without prior notice for quality improvement. 15LS1R * : AC100-240V~ 50/60Hz 0.7A / 40W 20LS1R * : AC100-240V~ 50/60Hz 1.0A / 60W 20LS2R * : AC100-240V~ 50/60Hz 1.0A / 60W 23LS2R * : AC100-240V~ 50/60Hz 0.9A / 85W 15LS1R * : 463.3mm x 166.3mm x 353.5mm 18.2inches x 6.[...]

Downloaded From TV-Manual.com Manuals[...]