LG Electronics 22LY560M manuale d’uso

Express Script Installer Menu Wizard pages 12 – 17 Custom Master TV Setup pages 31 – 35 FTG Mode of Operation pages 46 – 52 EXPERIENCED INST ALLER © Copyright 2014 LG Electronics U.S.A., Inc. Hospital TVs P/N: 206-4261 (Rev A) Commercial Mode Setup Guide Note: Selected features shown within this guide may not be available on all models. 22L [...]

2 206-4261 MODEL and SERIAL NUMBER The model and serial numbers of this TV are located on the back of the cabinet. For future reference, LG suggests that you record those numbers here: Model No._________________ Serial No._______________ W ARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER- SERVICEABLE P ARTS INSIDE[...]

3 206-4261 IMPORT ANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water . 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accor- dance with the manufacturer ’s instructions. 8. Do not install near [...]

4 206-4261 IMPORT ANT SAFETY INSTRUCTIONS (Continued from previous page) 22. Outdoor Antenna Grounding If an outside antenna or cable system is connected to the product, follow the precautions below . An outdoor antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits or where it can com[...]

5 206-4261 T able of Contents Notes • Installer Menu content is intended for use primarily by qualied TV electronics technicians. • Refer to the Owner ’s Manual for additional information on TV installation, features, specications, maintenance, and safety instructions. • Design and specications subject to change without prior notic[...]

6 206-4261 Commercial Mode Overview This document describes how to set up L Y560M Pro:Centric ® TVs for Commercial Mode operation. LG commercial TV functionality is based on “ownership” of the Channel Map; that is, the Channel Map resides in the TV’ s CPU or Protocol T ranslator Card (PTC) or it resides externally from the TV (i.e., in a dev[...]

7 206-4261 Commercial Mode Overview (Cont.) T ypical Installer Menu TV Setup Menus PICT UR E A UD IO INP UT OPT IO N TIM E MY ME DI A CHA NN EL L OC K Installer Menu T o create a customized Master TV Setup, you will need to know how to access the commercial controller (PTC) Installer Menu and make changes to the default values as required. If neces[...]

8 206-4261 FTG Mode Features FTG Mode provides the following features: • Logical or physical tuning of physical RF channels and Aux inputs. • Mapping of RF channels with minor (program) numbers up to 999. • FTG Channel Map of up to 600 channels. • Start Channel set for RF or Aux input delivered content. • Pro:Centric data delivery over RF[...]

9 206-4261 PICT URE A UDIO INP UT OPT ION TIM E MY MEDI A CHA NNEL L OCK TV Setup Menus Shows that the TV is in Pass-through Mode . Function Menu Indicates the TV is not in Pass- through Mode . While the TV is in this mode, Installer Menu settings can be accessed as read-only . ASP ECT RA TIO OK Mov e ABC 16:9 Just Scan Set By Program 4:3 Zoom Dete[...]

10 206-4261 Pro:Centric Interactive Menu Features LG’ s P ro:Ce ntric ap plica tion enables patients and visitors to locate and select television entertainment using an interactive channel guide, check the daily weather , and view hospital and surrounding amenities via custom billboards and poi nts-o f-int erest maps. Pro:Centric application feat[...]

1 1 206-4261 Pro:Centric Operation (Cont.) Pro:Centric Setup Adm inist ratio n and mana gemen t o ption s for the Pro:C entri c s erver are descr ibed in detai l in the Pr o:Cen tric Ser ver Admin Clie nt Us er Gu ide . This docu ment descr ibes only those sett ings tha t mus t be speci ed o n the TV s to enable the Pro:Centric remote management[...]

12 206-4261 The Expr ess S cript Inst aller Menu Wiza rd gu ides you t hroug h the pro ces s of setti ng up the essen tial ite ms fo r mos t hos pital TV viewi ng ap plica tions and also enabl es yo u to con gure the Pro:C entri c set tings on t he TV . Th e wiz ard w ill a ppear on t he sc reen each tim e the TV is t urn ed ON , unt il con g[...]

13 206-4261 Express Script Installer Menu Wizard (Cont.) Congure Pro:Centric Settings The next wiza rd sc reen enabl es you t o set up t he Pr o:Cen tri c fea ture of th e TV . By defa ult, the Dat a Cha nnel is co ngur ed fo r Aut o Sea rch, whi ch en ables the TV’ s Da ta Ch annel Auto Sear ch fea ture to se t the Data Chan nel valu e. Se[...]

14 206-4261 Insta ller Menu Wiza rd Step 1. T uning Ban d Cabl e Stan dard PTC: V1.00.020 CPU: V03.11.00.01 ASIC: D279 Back Next OK Exit CC 1 ► 2 ► 3 ► 4 ► 5 ► 6 ► 7 ► 8 Which tuning band would you like to use? Insta ller Menu Wiza rd Step 2. Aux Input Cust omize Inpu ts PTC: V1.00.020 CPU: V03.11.00.01 ASIC: D279 Back Next OK Exit CC[...]

15 206-4261 Express Script Installer Menu Wizard (Cont.) (Continued on next page) (Continued from previous page) 3. Select the speaker conguration. Use the Up/Do wn ar row k eys o n t he In stall er Re mote to se lec t the spe aker cong urati on e ld, a nd then use the Left/Right arrow keys to select the appropriate speaker: Pillow Only (d[...]

16 206-4261 Express Script Installer Menu Wizard (Cont.) (Continued from previous page) Not e: Y ou MUST select Execute Auto Search and press OK in order to run the channel scan. If you move on to the next step without running the Auto Search, there will be no analog or digital channels in the channel lineup (Channel Map). In t his c ase, upon comp[...]

17 206-4261 Express Script Installer Menu Wizard (Cont.) (Continued from previous page) When you are nished, press MENU to close the pop-up window . Use the arrow keys to select Next , and then press OK . 8. Completion. In the nal step, the TV saves your settings and transfers the setup to the commercial controller (PTC). (This is similar to [...]

18 206-4261 Ez Download Utility The Ez D ownlo ad ut ilty , ava ilabl e fro m the TV Manag er / USB D ownlo ad Me nu, e nab les y ou to sele ct mul tiple les at o ne ti me fr om the  les l oaded on a USB mem ory d evice . Y ou ma y use this util ity t o dow nload any one o r all of the follo wing to a TV : a TL X le fo r con gura tion p[...]

19 206-4261 (Continued on next page) Ez Download Utility (Cont.) (Continued from previous page) 4. T o ac cess the TV Mana ger / US B Dow nload Menu from th e T V men us: • Press MENU on the Installer Remote to display the TV setup menus (TV is in Pass-through Mode) or the Function Menu (TV is not in Pass-through Mode). • Us e the ar row n avig[...]

20 206-4261 Ez Download Utility (Cont.) (Continued from previous page) Note: There are no op tio ns av ailab le/ap plica ble for TLL le s. Note: Press on the Installer Remote, as necessary , to exit the Ez Download screen and/or the TV Manager / USB Download Menu and return to TV viewing. 8. When you are ready to continue, use the arrow keys on [...]

21 206-4261 Installer Menu Use the Installer Menu to set up, change, or view operational settings. This section describes how to access, use, and exit the Installer Menu from the TV itself. However , you should also refer to the Installer Menu descriptions in this document if you are conguring the TV using an FTG Conguration (.tlx) le crea[...]

22 206-4261 As part of the Installer Menu header (in all modes), two 3-character acronyms are displayed to indicate the TV’ s current conguration mode. The table below lists all possible mode identiers for these TV models. Acronym Description CPU-CTV Pass-through Mode with Channel Map in CPU CPU-FTG FTG Mode via CPU CPU-P:C Application T un[...]

23 206-4261 Item Function V alue Range Default V alue Brief Description of Function 000 INST ALLER SEQ 0 ~ 3 0 Leave default set to 0. 001 POWER MANAGE 0 ~ 7 0 Sets number of hours of no activity before automatic shutoff. 002 AC ON 0 / 1 0 Set to 1 to enable TV to turn ON when AC power is applied. 003 BAND/AFC 0 ~ 3 1 Selects Tuning Band: 0=Broadca[...]

24 206-4261 Installer Menu (Cont.) Installer Menu Items 053 through 122 Item Function V alue Range Default V alue Brief Description of Function 053 DIS. CH-TIME 0 / 1 0 Set to 1 to disable Channel-Time display . 069 EN. CH-T COL. 0 / 1 1 Set to 1 to enable custom color for the Channel-Time display . 070 FOR. CH-TIME 0 ~ 7 2 Chooses custom foregroun[...]

25 206-4261 000 - INST ALLER SEQUENCE Species entry sequence to the Installer Menu. 0 = 9876 1 = 4321 2 = 1478 3 = 3698 001 - POWER MANAGE (Power Management) Determines hours of no activity before automatic shutoff. The Power Management function is for saving energy . If set to 0, Power Management is Off. Settings range from 0 ~ 7, with 1 ~ 7 re[...]

26 206-4261 012 - IR BANKS EN (IR Banks Enable) For direc t acce ss to a par ticula r cha nnel b ank. W hen e nabled , you can acces s a ch annel bank by inp uttin g the discre te IR code for tha t bank . Not e: This item is not available in the Installer Menu when item 027 HOSPIT AL MODE is set to 0. 013 - SCAN MODE (Functional after 2-5-5 + MENU [...]

27 206-4261 Installer Menu (Cont.) When Hospital Mode is enabled and the TV is in Pass-through Mode, channel banks are also available. Refer to channel banks information in this document for further details. Channe l banks are not s upported if Hospi tal Mode is set t o 0 or on TVs th at are con gured for FTG Mod e oper ation. When Hospital Mode[...]

28 206-4261 069 - EN. CH-T COL. (Enable Channel-Time Custom Color) Set to 1 to enable custom color for the Channel-T ime display . Set to 0 to disable custom color for the Channel-T ime display . 070 - FOR. CH- TIME (Channel-T ime Disp lay Foregr ound Color) Set according to Color Chart: 0 = Black 3 = Cyan 6 = Y ellow 1 = Blue 4 = Red 7 = White 2 =[...]

29 206-4261 096 - DEF . ASP . RA TIO (Default Aspect Ratio) Selects default aspect ratio at power up: 0 = Set By System 1 = 4:3 2 = 16:9 (default) 3 = Just Scan 4 = Zoom Note: This item is not available in the Installer Menu unless item 106 ASP RA TIO LOCK is set to 0. 097 - AUDIO OUTPUT Det ermin es av ailab ili ty an d sig nal t ype /leve l (x[...]

30 206-4261 1 17 - F ACT DEF AUL T (Factory Default) Set to 1 and press OK to restore the factory default settings of all Installer Menu items. Once complete, the value returns to 0. Cau tion: If set to 1 , this clea rs all In stalle r Men u cust om set tings and r estore s the facto ry de fault setti ngs. I t als o cle ars th e chan nel l ineup, i[...]

31 206-4261 Custom Master TV Setup Notes: • Some menu options vary between analog and digital channels and Aux inputs. • The end user only has access to features that are available on the pillow speaker or the user remote control if provided by the institution. Thi s sec tion des cribe s how to create a customized Master TV Setup for clo ning p[...]

32 206-4261 Custom Master TV Setup (Cont.) T ypical Installer Menu Note: The Installer Menu header will vary depending on the TV you are setting up. Adjust the values for these Installer Menu items. Custom Master TV Setup Procedure 1. T urn ON the TV . If the Express Script Installer Menu Wizard appears on the screen when you turn ON the TV , exit [...]

33 206-4261 4. (PTC cloning only / Optional) Run Auto T uning. Note: If yo u run A uto T unin g wit h the int ent ion to clo ne the re sulti ng cha nnel line up and the T arg et TV( s) is/a re to rema in in Pas s-thr ough Mod e, you MU ST use a TL L l e for thi s clo ning pu rpose . a) Use the Insta ller Remot e to acc ess t he Ch annel Menu . T[...]

34 206-4261 (Continued from previous page) 5. (PTC clo ning onl y) T rans fer the auto- tuned /edit ed chann el lineu p (if app licab le) and TV set up menu setti ngs to the PT C: 2-5-5 + MENU Mode Note: This step is essential for successful cloning using a TLL file. Without this step, the PTC will not contain any channels or TV setup menu settings[...]

35 206-4261 After verifying the TV Setup, it is recommended that you set Installer Menu item 028 CH. OVERIDE to 0. 028 CH. OVERI DE 000 (Continued from previous page) 7. V erify the TV setup. Make sure the TV features are set per your requirements. Also, if cloning an auto-tuned/edited channel lineup, verify that the channel lineup, channel icons, [...]

36 206-4261 Channel Icons / Custom T ext Labels (2-5-4 + MENU Mode) Changing Channel Icons and/or Adding or Editing Custom T ext Labels in the Channel-Time Display If there is no pre-assigned icon for a channel, you can add a custom text label of up to seven (7) characters to help identify the channel or network. Also, if desired, a custom text lab[...]

37 206-4261 C HA NN EL P RE VI EW - B AN K 1 C H 01 1 -0 01 N OR MA L -A DDED E nt er - > Ch an ge C C -> V CH IP M en u, Ch . Pr ev ie w -> E xi t Channel Banks Setup Channel Banks Overview Channel Banks enable institution administrators to create tiered channel programming on patient in-room TVs. Each channel bank may offer a custom chan[...]

38 206-4261 Channel Banks Setup (Cont.) T ypical Channel Previe w/Bank s Setup Menu C HA NN EL P RE VI E W - B AN K 1 C H 01 1 -0 01 N OR MA L -AD DED E nt er - > C ha ng e C C -> V CH I P Me n u, Ch . P re vi ew - > E xi t IDs currently selected channel bank. IDs currently selected channel. IDs channel status in selected bank. Channel Sta[...]

39 206-4261 Channel Banks Setup (Cont.) Inactive TV Setup The re are two op tio ns for crea ting an in act ive TV disp lay on Chan nel Bank 4. Eith er: • Select NORMAL-DELETED for each channel in Channel Bank 4, or • Pres s CH. BANK on t he In sta ller Remot e unt il Ch annel Ba nk 4 is se lecte d, and then pres s CH. PREV IEW to displ ay th e [...]

40 206-4261 Date _____________ Installer _____________________________________ Page ___ of ____ Location ______________________________________________________________________ Channel Banks W orksheet B A N K Channel Number 1 2 3 4 B A N K Channel Number 1 2 3 4 B A N K Channel Number 1 2 3 4 B A N K Channel Number 1 2 3 4 B A N K Channel Number 1 [...]

41 206-4261 Cloning Overview Clonin g refers to the process of captu ring a Master TV Setup and transfer ring it to a T arget TV that is to remain in Pass-t hrough Mode. There are two dif ferent procedure s for cloning a Maste r TV Setup, each with its own advan tages and limitat ions (see also “Cloni ng Methods ” on page 31): • Using a USB m[...]

42 206-4261 Cloning Procedures (Cont.) Learn Setup from Master TV 1. Ensure the Master TV is set up completely and in Pass-through Mode. 2. Insert the USB memory device into the USB port on the Master TV . 3. Press MENU on the Insta ller Remot e t o dis play the TV se tup m enus. Use the arrow navi gatio n key s t o sel ect/h ighli ght the Optio n [...]

43 206-4261 Cloning Procedures (Cont.) (Continued from previous page) 3. If th e Mas ter TV Setu p con tains a TV Zone # a ssign ment, make sure to assign the same Zone designation in the T arget TV at this time. See Reference section, “Using the TV Zoning Feature,” for further information. Note: In order for the proper location-specic TV Zo[...]

44 206-4261 Cloning Procedures (Cont.) Learning / T eaching a Master TV Setup using a TLL File This section describes how to Learn and/or T each a Master TV Setup using a TLL le. Before Y ou Begin • Learning and T eaching is only possible between identical model TVs. • Complete the Custom Master TV Setup procedure or run the Express Script I[...]

45 206-4261 Cloning Procedures (Cont.) T each Master TV Setup to T arget TV Note: Y ou may also use the Ez Download utility to complete the T eaching process, if desired. See “Ez Download Utility” on pages 18 to 20 for further information. 1. Turn ON the T arget TV . The next step depe nds o n whe the r the Expr ess S cript Inst all er Me nu Wi[...]

46 206-4261 FTG Mode of Operation This section describes how to create an FTG Configuration (.tlx) file using the FTG File Manager . It also describes how to locally configure a TV for FTG Mode operation. See also the FTG Mode overview on pages 7 to 8 for further information on FTG Mode. Creating an FTG Conguration File The proc edure belo w des[...]

47 206-4261 FTG Mode of Operation (Cont.) (Continued from previous page) Note: T o clear the current TLX File Contents, click the New button in the TLX File command section of the FTG File Manager main screen (above the TLX File Contents window). 3. T o add an FTG Channel Map to the FTG Configuration List, click under FTG Channel Map. This will cop[...]

48 206-4261 T eaching FTG Conguration to a TV This section describes how to transfer (T each) an FTG Conguration le from a USB memory device to a TV , using the TV Manager / USB Download Menu “T each T o TV (TLX)” option. The FTG Conguration le may be created either in the FTG File Manager or from a Master TV Setup that was saved[...]

49 206-4261 (Continued from previous page) Note: In order for the proper location-specic TV Zone prole data to be applied, the Zone designation must be assigned in the T arget TV(s) BEFORE T eaching is performed. 3. Inser t the USB memory dev ice that c ontains th e FTG Con gurati on le into the US B port. 4. Pre ss ME NU on the Insta l[...]

50 206-4261 Learning FTG Conguration from a TV T o ensure that dec rypti on of Pro:I diom enc rypte d cha nnels is enabled, it is recommended that you create an FTG Configuration file using the FTG File Manager as described on pages 46 to 47. However , if necessary , there is an option to save (Learn) an FTG Configuration file from an L Y560M TV[...]

51 206-4261 FTG Mode of Operation (Cont.) Optional Manual Conguration / TV Setup The manual configuration procedures below should only be performed if you want to save cus tomiz ed TV set up menu set tings to the FT G Con gurat ion le and /or if you do not kno w the RF cha nnels at the sit e and need to “Lea rn” FTG Con figur ation fro[...]

52 206-4261 (Continued from previous page) 3. Set Installer Menu item 1 17 F ACT DEF AUL T to 1 and press OK on the Installer Remote. This clears all Installer Menu custom settings, the channel lineup, etc. and restores the factory default settings. The value will change back to 0 after the commercial controller (PTC) has been restored to factory d[...]

53 206-4261 Note: The data referenced in the FTG Conguration List is only a snap- shot of the current FTG Channel Map and FTG Installer Menu settings when copied to the list. If you make any change(s) to the current data to be included in the FTG Conguration List, you will need to recopy Channel Map and Installer Menu settings to the FTG Con?[...]

54 206-4261 FTG Channel Map Conguration Utility The FTG Channel Map Configuration Utility enables you to create, view , edit, and print a Logical Channel Map. PRINT MAP Click to display a printable FTG Channel Map Report. The report can also be exported as an HTML or T ext file. EDIT/ADD MAP Cli ck to open the FTG Cha nnel Map Edi tor to crea te[...]

55 206-4261 FTG File Manager Utilities Overview (Cont.) DELETE Click to remove highlighted channel from FTG Channel Map. ADD After defining a new Logical Channel, click to add channel to the FTG Channel Map. FTG Channel Map Editor The FTG Channel Map Editor shows a single Logical Channel’s data and the FTG Channel Map. EXIT Click to exit editor a[...]

56 206-4261 FTG File Manager Utilities Overview (Cont.) CONFIGURA TION SETTINGS Select tabs for categories of Installer Menu items to set up TV . FTG Installer Menu Conguration Utility Filename of opened FTG Configuration (.rml) file created using FTG Device Configuration Application. Notes: • The Pro:Centric tab enables you to set up Pro:Cent[...]

57 206-4261 IP Environment Setup The IP Envi ronme nt Men u ena bles you to set up th e net wor k fea tures of the TV . Wit h the exce ption of Netw ork Conn ectio n set tings , the IP Env ironm ent sett ings are edit able (wi th the Inst aller Remo te) only if the TV is in Pass -th rough Mode and rea d-onl y whe n the TV is not in Pas s-thr ough M[...]

58 206-4261 (Continued from previous page) The next Network Setting window will enable you to specify the IP and DNS conguration for this TV . Auto settings will be selected by default. Use the arrow keys to select the appropriate options, and specify the conguration data for the IP and DNS modes. When all elds are completed, select OK on [...]

59 206-4261 Pro:Centric Setup Pro :Cent ric o ption s ena ble y ou to co ngur e the TV with the app ropri ate s ettin gs to conn ect to t he Pr o:Cen tric serve r . Us e the Up/ Down arrow keys on t he In sta ller Remot e to navig ate b etw een el ds. 1. With the I P Envi ronme nt Me nu on di splay , us e the arro w key s on the I nstal ler R[...]

60 206-4261 (Continued from previous page) IP Conguration a) In the Media T ype eld, use the Left/Right arrow keys to select IP . Note: If th e Media T ype ha s alre ady been s et in the Expre ss Sc rip t Ins talle r Men u Wizard, the s pecie d value wi ll be ree cted in th is eld. Note: Setting the Media T ype to “IP” automatica[...]

61 206-4261 Reference: Upgrading TV/PTC Software using a USB Memory Device Thi s sec tion descr ibes how t o u pdate TV (C PU) a nd/or PTC softw are u sin g the TV Manag er / USB D ownlo ad Me nu “Upgr ade TV So ftwar e” an d/or “Upda te PT C Sof tware ” opt ion(s ), re spect ive ly , t hou gh yo u may also use the E z D ownlo ad ut ility t[...]

62 206-4261 Re fer enc e: D own loa din g a Spl ash Sc ree n u sin g a USB Me mor y D evic e This section describes how to download a splash screen image using the TV Manager / USB Download Menu “Logo Image Download” option, though you may also use the Ez Download utility to download the splash image, if desired. See “Ez Download Utility” o[...]

63 206-4261 Reference: Power Consumption Settings Note: V alues are results of controlled experiments under laboratory conditions. The following tables assume that Installer Menu item 099 BACK LIGHTING is set as shown below (default value is 255). Item 099 Back Lighting (Static) 22L Y560M 28L Y560M 32L Y560M 42L Y560M Power Consumption (W atts) Per[...]

64 206-4261 Reference: TV Aux Input Conguration DIRECT ACCESS T uning * TV ENABLE MPI DA T A Installer Menu Item 046 ST ART AUX SRCE (Start Aux Source) V alue Installer Menu MPI DA T A ST A TUS TYPE 0x41 SOURCES ENABLED (R/W) DA T A ST A TUS TYPE 0xD2 CURRENT A V SOURCE (R) DA T A ST A TUS TYPE 0x0D AUX SOUR CE (R) Installer Menu Item 029 OLD OC[...]

65 206-4261 Reference: Auto Input(s) Sensing Feature This section provides detailed settings information for Installer Menu item 042 AUTO INPUTS. T o disable auto-sensing for all available Aux inputs, set item 042 to 0. T o enable auto-sensing for all available Aux inputs, set item 042 to 255. For specications on all other available settings (i.[...]

66 206-4261 Reference: Auto Input(s) Sensing Feature (Cont.) Item 042 V alue Inputs Installer Menu Display A V1 RGB HDMI 1 HDMI 2 001 Enabled Disabled Disabled Disabled DDXDXXX0 016 Disabled Enabled Disabled Disabled DDX4XXXD 017 Enabled Enabled Disabled Disabled DDX4XXX0 064 Disabled Disabled Enabled Disabled D6XDXXXD 065 Enabled Disabled Enabled [...]

67 206-4261 Reference: L Y560M Hospital Operations Hospital Features The following table identies when and how the L Y560M hospital features are supported in three different TV congurations. As indicated in the introduction to this document, LG commercial TV functionality is based on “ownership” of the Channel Map. For the purposes of thi[...]

68 206-4261 Speaker Selection The following table outlines speaker settings as determined by Installer Menu items 027 HOSPIT AL MODE and 020 FEA TURE LEVEL. Item 027 HOSPIT AL MODE V alue Item 020 FEA TURE LEVEL V alue Audio Menu TV Speaker Speaker 0 0 ~ 24 OFF None 0 0 ~ 24 ON TV Only 0 64 ~ 65 N/A Pillow Only 1 ~ 34 N/A N/A Pillow Only 65 ~ 98 N/[...]

69 206-4261 Thi s sec tion descr ibes how t o r estor e all fact ory d efaul ts or ju st th e Ins talle r M enu f actor y def aults eith er on a sin gle TV t hat i s c urren tly i n Pas s-thr oug h or FTG M ode o r on multi ple TV s tha t a re cu rrent ly in FTG Mode. Note: If the TV(s) is/are currently in FTG Mode, restoring the factory defaults a[...]

70 206-4261 Reference: Using the TV Zoning Feature This s ection des cribes the TV Zo ning f eature ava ilable wit h the L Y560 M model TVs. The TV Zonin g featur e enables you to cre ate locali zed congu rations fo r TVs in sel ected loca tions , or “ Zones,” wi thin the instal lation env ironment, for exa mple, a ho tel l obby , tn ess [...]

71 206-4261 OPT ION OK Mo ve • Language • Caption : Off • Standy Light : Of f • DivX(R) VOD • Set ID : 1 • Demo Mode • Zone : 1 • Eject Reference: Using the TV Zoning Feature (Cont.) Note: While a channel can be restricted from up to eight Zones, a TV can only ever be in (set for) one Zone. See also the FTG C hanne l Map Ed itor ove[...]

72 206-4261 Reference: 22/28L Y560M Rear and Side Jack Panels PI LL OW SP EAK ER AN TE NNA / CA BL E I N RGB IN (PC) SP EA KER O UT LI NE OU T SE R VIC E ONL Y MPI R ES ET OP TI CAL AU DI O O UT LA N I N 1 R ES ET U PD A TE UPDA TE Restricted to software updates. RESET Initiates a hardware reset and turns the TV OFF . MPI Whe n the T V is in Pass-t[...]

73 206-4261 Reference: 32/42L Y560M Rear and Side Jack Panels PI LLO W SPE AKE R AN TEN NA / CA BLE I N RGB IN (PC) SP EAK ER OU T LI NE OU T MPI VI DE O L/ MO NO - AU DI O- R A V IN/AUDIO IN (RGB DVI) L R OP TIC AL AU DIO O UT LA N SE RV ICE O NL Y IN 1 RE SE T RE SE T UP DA TE UPDA TE Restricted to software updates. RESET Initiates a hardware res[...]

74 206-4261 The three-contact (left, right, ground) SPEAKER OUT 3.5 mm jack on the L Y560M rear panel provides stereo speaker signal outputs (xed speaker , variable speaker , or xed line level [amplier]) for external audio equipment. Set Installer Menu item 097 AUDIO OUTPUT as required in accordance with external audio equipment connected [...]

75 206-4261 FL ASHB K ME NU PO WER TV LG 1 TV LG 2 TV Z1 TV Z2 POR TAL INF O GUID E CH . BA NK CH . PR EVIE W MU TE TI MER AL ARM EX IT CC S AP OK VO L VO L CH CH + + Reference: Installer Remote Control T ypical Key Functions NUMBER Buttons (0 - 9) & DASH Use to enter a channel or program number . Dash is used for sub-channel numbers such as 9-[...]

76 206-4261 Reference: Pillow Speaker Setup The pillow speaker will only be functional after the Express Script/Custom Master TV Setup and/or cloning procedures are complete. Note: When Installer Menu item 027 HOSPI T AL MODE is set to 254 (facto ry default value), t here is no power (volt age) suppl ied to the pillow sp eaker . 1 2 3 4 5 6 3 1 5 2[...]

77 206-4261 Reference: USB Media Navigation using Pro:Centric Pillow Speaker The Pr o:Centric pillow spe aker is cu rrently th e only pil low sp eaker that enables u sers to naviga te and pla y/view USB media le s (videos, music, ph otos, etc.). This sect ion p rovide s a brie f overview of the Pr o:Centric pillow spe aker navig ation tools. Not[...]

78 206-4261 General Guidelines: Choosing a Location for Installing a VESA Standard Mount T o the right are some examples of VESA standard mounts. Since there are numerous types of stands and mounts available, only a few are shown here. Refer to the instruc- tions provided with the TV stand that will be used to mount the TV . Be sure the style of st[...]

79 206-4261 T roubleshooting General T roubleshooting (Some Quick and Easy T ips for Resolving Problems) Installation Symptom Possible Cause(s) Possible Solution(s) Cannot direct enter channel number . (TV in Pass-through Mode) Installer Menu item 028 CH. OVERIDE is set to 0, i.e., disabled and/or Channel Access was denied in Express Script. If the[...]

80 206-4261 TV turned ON? Y es No Press POWER on Installer Remote. TV is not in Commercial Mode. Call T echnical Support for assistance. TV is in Commercial Mode. No On-screen menu display no longer toggles? Y es Press MENU repeatedly as if to access the Installer Menu. Function Menu on display? Leave the TV set ON, and press MENU on the Installer [...]

81 206-4261 Channel Previe w/Bank s Setup Menu C HA N NE L P RE VI EW - B A N K 1 C H 0 1 1- 00 1 NO RM AL -A DDED E nt e r -> C h a ng e C C - > VC HI P M en u, C h . P re vi ew - > E xi t Symptom Possible Cause Possible Solution Cannot change channel status in menu. Channel Access was denied in Express Script and/or Installer Menu item 0[...]

82 206-4261 Glossary of T erms Channel Lineup Channels set in the TV memory , via Auto T uning/manual editing. Channel Banks Enables tiered channel programming options for hospital models. Each channel bank may offer a custom channel lineup. Cloning The process of capturing a Master TV Setup and transferring it to a T arget TV using a USB memory de[...]

83 206-4261 Document Revision History / Open Source Software Notice Document Revision History Date Description June 2014 Revision A: New document Product documentation is available online at: www .LGsolutions.com . Open Source Software Notice T o ob tain the so urce cod e unde r GPL, LGPL , MPL and o ther ope n sour ce lic enses , that is co ntain [...]

206-4261 Revision A © Copyright 2014 LG Electronics U.S.A., Inc. For Customer Support/Service, please call: 1-888-865-3026 www .LGsolutions.com Pro:Idiom is a registered trademark of Zenith Electronics LLC. Pro:Centric is a registered trademark of LG Electronics Inc. All other trademarks or registered trademarks are the property of their respectiv[...]