LG Electronics 42LY770M manuale d’uso

LG Setup Wizard pages 12 – 13 Custom Master TV Setup pages 46 – 48 Cloning Procedures pages 53 – 58 EXPERIENCED INST ALLER Commercial Mode Setup Guide Note: Selected features shown in this guide may not be available on all models. Hospital Grade Interactive Pro:Centric ® TVs © Copyright 2015 LG Electronics U.S.A., Inc. P/N: 206-4271 (Rev C)[...]

2 206-4271 MODEL and SERIAL NUMBER The model and serial numbers of this TV are located on the back of the cabinet. For future reference, LG suggests that you record those numbers here: Model No._________________ Serial No._______________ W ARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER- SERVICEABLE P ARTS INSIDE[...]

3 206-4271 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water . 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accor- dance with the manufacturer ’ s instructions. 8. Do not install near any heat sources, such as radi[...]

4 206-4271 (Continued from previous page) 22. Outdoor Antenna Grounding If an outside antenna or cable system is connected to the product, follow the precautions below . An outdoor antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits or where it can come into contact with such power [...]

5 206-4271 T able of Contents Safety W arnings ..................................... 2 Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . 3 – 4 T able of Contents .................................... 5 Commercial Mode Overview ........................ 6 – 9 Setup Checklist .................................... 6 Pass[...]

6 206-4271 Commercial Mode Overview This document describes how to set up L Y770M Pro:Centric  ® TVs for Commercial Mode operation. LG commercial TV functionality is based on “ownership” of the Channel Map; that is, the Channel Map resides in the TV’ s CPU, Protocol T ranslator Card (PTC), or embedded b -LAN™ (EBL) module, or it resides [...]

7 206-4271 Commercial Mode Overview (Cont.) T ypical Installer Menu TV Setup Menus Installer Menu T o create a Master TV Setup, you will need to know how to access the commercial controller (PTC) Installer Menu and make changes to the default values as required. If necessary , familiarize yourself with the Installer Menu and how to make and save ch[...]

8 206-4271 Commercial Mode Overview (Cont.) When the TV CPU is configured with an FTG Channel Map, the CPU controls and restricts the tuning operation of the TV , and when the EBL is configured with an FTG Channel Map, the EBL controls and restricts the tuning operation of the TV . In these models, depending on the types of channels included in the[...]

9 206-4271 Commercial Mode Overview (Cont.) While the TV is in FTG Mode: • Users can still access the Installer Menu using an LG Installer Remote; however , all Installer Menu items will be read-only . • FTG Mode via CPU conguration changes must be made using a TLX le (typically edited in the FTG File Manager), while FTG Mode via EBL con?[...]

10 206-4271 Pro:Centric Operation Pro:Centric Interactive Menu Features LG’s Pro:Centric application enables patients and visitors to locate and select television entertainment using an interactive channel guide, check the daily weather , and view hospital and surrounding amenities via custom billboards and points-of-interest maps. Pro:Centric ap[...]

11 206-4271 Pro:Centric Operation (Cont.) Pro:Centric Setup Administration and management options for the Pro:Centric server are described in detail in the Pro:Centric Server Admin Client User Guide . This document describes only those settings that must be specied on the TVs to enable Pro:Centric remote management and/or the Pro:Centric applica[...]

12 206-4271 Note: After it is turned ON, the TV begins an initialization process, and it may take several minutes for the LG Setup Wizard to appear . The LG Setup Wizard, comprising EZ-Manager Wizard and Express Script configuration options, will appear on the screen each time the TV is turned ON, until one of its configuration methods has been com[...]

13 206-4271 LG Setup Wizard (Cont.) Initiate Conguration or Exit the LG Setup Wizard The Welcome screen provides a brief introduction to the LG Setup Wizard . WELCOM E TO LG’S SETUP WIZARD EXIT This wizard features two dierent setup options: . The EXPRESS SCRIPT allows automated setup of hospital features, such as a pillow speaker, and supp[...]

14 206-4271 EZ-Manager Wizard Initiate the EZ-Manager Wizard After you select the “EZ-Manager” option from the Setup Wizard Welcome screen, an EZ-Manager Welcome screen provides a brief introduction to the EZ-Manager Wizard. Note: Each EZ-Manager Wizard step is allotted a time frame after which the wizard proceeds without user interaction. If t[...]

15 206-4271 EZ-Manager Wizard (Cont.) EZ-Manager Wizard (Cont.) TV Conguration Options From the TV Conguration Options screen, you can choose how to proceed with the conguration of this TV (assuming you do not opt to exit the wizard, which you may also do at any time). Note: If you intend to use the Zoning feature(s) on the TV for location[...]

16 206-4271 EZ-Manager Wizard (Cont.) Note: Zoning features are only applicable for TVs that will be congured using a TLX le (local or remote conguration). ZONES, LABEL, AND ROOM NUMBER NEXT USB CONFIGURA TION . If creating Wi-Fi Zones for AP settings, select the appropriate Wi-Fi Z one # (1-99) based on the Wi-Fi Zone in which this TV is [...]

17 206-4271 EZ-Manager Wizard (Cont.) Congure Pro:Centric Settings Once you select “ NEXT ” from the TV Conguration Options screen, the Searching for Pro:Centric Server screen is displayed. Note: If any of the conguration steps fails, you will see a “Diagnostics” screen with an indication of the failure. Y ou will then have the opp[...]

18 206-4271 (Continued from previous page) If the process is successful, no further user interaction is required, though, in some instances, where the option (for example “NEXT”) is available, you may manually move forward to subsequent steps within the wizard to speed up the process. PROCESSING THE PRO:CENTRIC CONFIGURA TION Downloading the Pr[...]

19 206-4271 EZ-Manager Wizard (Cont.) Pro:Centric Manual Configuration Screen with RF Media Fields Pro:Centric Manual Configuration Screen with IP Media Fields Manual Pro:Centric Conguration 1. With the Searching for Pro:Centric Server screen on display , u se the arrow keys on the Installer Remote to select/highlight MANUAL PRO:CENTRIC at the b[...]

20 206-4271 * PCS150R and later Pro:Centric servers do not support HRC or IRC cable channel frequencies. (Continued from previous page) 3. Refer to the appropriate subsection below , depending on the Pro:Centric server conguration, to complete the remaining elds. RF Conguration a) In the Media T ype eld, use the Left/Right arrow keys to[...]

21 206-4271 EZ-Manager Wizard (Cont.) USB Conguration The TV Manager / USB Download Menu provides options that enable you to download individual conguration or software les to the TV , or you can use the Ez Download utility available from the menu to select and download multiple conguration or software les at one time. Each of the TV[...]

22 206-4271 EZ-Manager Wizard (Cont.) (Continued from previous page) 2. U se the arrow keys on the Installer Remote to select USB CONFIGURA TION , and then press OK . Y ou will be redirected to the TV’ s TV Manager / USB Download Menu (see example below). CANCEL TV MANAGER USB Download Menu Diagnostics Menu Ez Download Logo Image Download Update [...]

23 206-4271 Initiate the Express Script Note: While the Express Script enables you to set up TVs in lieu of cloning, you can also use an Express Script TV Setup for cloning purposes (clone programmer only), if desired. However , note that TV setup menu customization via the Express Script is limited to Channels Menu options. After you select the ?[...]

24 206-4271 Express Script (Cont.) If you wish to proceed with the wizard without changing the default values for the Pro:Centric settings, you can simply select NEXT and press OK on the Installer Remote. Or , if you wish to exit the wizard while retaining the default values for Pro:Centric settings, use the arrow keys on the Installer Remote to se[...]

25 206-4271 Express Script (Cont.) (Continued from previous page) 1. In the Pro:Centric Mode eld, use the Left/Right arrow keys on the Installer Remote to select the appropriate Pro:Centric Application Mode—FLASH, GEM, HTML, or CONFIGURA TION ONL Y . Note: For remote management only , select CONFIGURA TION ONL Y . The TV will search for TV E-Z[...]

26 206-4271 Express Script (Cont.) Complete the TV Conguration The following procedure describes the remaining steps in the Express Script. Y ou can select the “BACK” button, where available, to check previous settings, as necessary . Note: If you choose to exit the Express Script from this point on, any settings made will not be retained. N[...]

27 206-4271 Express Script (Cont.) (Continued from previous page) Note: If an Aux input will not be used, it is advisable to disable it. After the TV setup is transferred to the PTC (see step 7), the only way to remove Aux inputs from the PTC Channel Map, is to go to the Channel Preview/Banks Setup Menu and select Normal-Deleted. 3. Use the arrow k[...]

28 206-4271 Express Script (Cont.) (Continued from previous page) Note: Y ou MUST select RUN AUTO TUNING and press OK in order to run the channel scan. If you move on to the next step without running Auto T uning, there will be no analog or digital channels in the channel lineup. In this case, upon completion of the Express Script, the only channel[...]

29 206-4271 Express Script (Cont.) (Continued from previous page) Use the arrow keys to navigate between the elds in this screen: • Channel/Input: Edit the channel lineup, as necessary , to include only clear (non-encrypted) channels. Use the Left/Right arrow keys on the Installer Remote to select channels, and press OK to delete (or re-add) c[...]

30 206-4271 Express Script (Cont.) (Continued from previous page) Note: It is recommended that you select “NO” to limit access to the channel lineup and prevent end users from accessing channel settings; i.e., the Channels options in the TV setup menus will be inaccessible/grayed out. 7. As the nal step of the Express Script, the TV saves yo[...]

31 206-4271 Ez Download Utility The Ez Download utility , available from the TV Manager / USB Download Menu, enables you to select multiple les at one time from the les loaded on a USB memory device. Y ou may use this utility to download any one or all of the following to a TV: a TLX le for conguration purposes, a TV CPU or PTC software[...]

32 206-4271 (Continued from previous page) 3. If the TV is currently in Pass-through Mode, you would like to transfer (T each) a TLX le to the TV via the Ez Download utility , and you intend to use one or both of the TV’s Zoning feature(s), assign the appropriate TV Zone # and/or Wi-Fi Zone # in the TV at this time. See Reference section, “U[...]

33 206-4271 Ez Download Utility (Cont.) (Continued from previous page) CANCEL BACK UPDA TE Channel T uning / Channel Banner Display Logical Physical TV SW Version 03.00.33 Update Version 03.00.34 EZ DO WNLO AD TV MANAGER Select USB Memory Device ˇ USB Device 1: Device Name Logo Image ˇ Splash Image 1920 X 1080 ProC.jpg T each to T V (TLX) ˇ LY77[...]

34 206-4271 Ez Download Utility (Cont.) (Continued from previous page) 9. If a TLX le that includes an FTG Channel Map is selected, a Channel Tuning / Channel Banner Display eld will be displayed at the right of the screen. If the FTG Channel Map comprises RF channels and Aux inputs only (the latter designated by 130-0 through 137-0), you can[...]

35 206-4271 Installer Menu Use the Installer Menu to set up, change, or view operational settings. This section describes how to access, use, and exit the Installer Menu from the TV itself. However , you should also refer to the Installer Menu descriptions in this document if you are conguring the TV CPU using a TLX le created using LG’ s F[...]

36 206-4271 As part of the Installer Menu header (in all modes), two 3-character acronyms are displayed to indicate the TV’s current conguration mode. The table below lists all possible mode identiers for these TV models. Acronym Description CPU-CTV Pass-through Mode with Channel Map in CPU CPU-FTG FTG Mode via CPU CPU-P:C Application T uni[...]

37 206-4271 Installer Menu (Cont.) Installer Menu Items 000 through 049 Item Function V alue Range Default V alue Brief Description of Function 000 INST ALLER SEQ 0 ~ 3 0 Leave default set to 0. 001 POWER MANAGE 0 ~ 7 0 Selects the number of hours of inactivity allowed before the TV automatically turns itself OFF . Set to 0 to disable Power Managem[...]

38 206-4271 Installer Menu Items 053 through 122 Item Function V alue Range Default V alue Brief Description of Function 053 DIS. CH-TIME 0 / 1 0 Set to 1 to disable Channel-Time display . 069 EN. CH-T COL. 0 / 1 1 Set to 1 to enable custom color for the Channel-T ime display . 070 FOR. CH-TIME 0 ~ 7 2 Chooses custom foreground color for the Channe[...]

39 206-4271 Installer Menu (Cont.) 000 - INST ALLER SEQUENCE Species entry sequence to the Installer Menu. 0 = 9876 1 = 4321 2 = 1478 3 = 3698 001 - POWER MANAGE (Power Management) Energy saving feature. Determines the number of hours, in the range 1 to 7, of inactivity allowed, either at the TV control panel or from the remote, before the TV au[...]

40 206-4271 Installer Menu (Cont.) 008 - MIN VOLUME (Minimum V olume) This function determines the minimum volume level allowable with the V olume (VOL) Up/Down control. In this way , for example, someone cannot set the volume too low to hear . The value range is from 0 to 63. The factory default is 0, which provides the full range of volume contro[...]

41 206-4271 Installer Menu (Cont.) 023 - CAPTION LOCK If set to 0, captions are OFF when the TV is turned ON. Set to 1 to use the caption setting congured before the TV was turned OFF when the TV is turned ON. 025 - FUNCTION PRE (Function Preview) Set to 1 to allow access to the Channel Preview/Banks Setup Menu via the CH PREVIEW key on Installe[...]

42 206-4271 041 - SIMPLINK EN Set to 0 to disable the SIMPLINK feature. Set to 1 to enable SIMPLINK functionality (does not enable remote control access to the SIMPLINK Menu). Note: When both this item and item 042 AUTO INPUTS are enabled in the Installer Menu, HDMI inputs will be detected by SIMPLINK, but the Auto Input(s) Sensing Feature will not[...]

43 206-4271 078 - UPN MSB (UPN Most Signicant Byte) User programmable number , most signicant byte readable by MPI command. Note: Not linked to serial number . 079 - UPN MSB-1 (UPN Most Signicant Byte-1) User programmable number , most signicant byte-1 readable by MPI command. Note: Not linked to serial number . 080 - UPN MSB-2 (UPN Mos[...]

44 206-4271 099 - BACK LIGHTING Sets the TV screen brightness at power up. Default setting is 255. • 1 (dimmest picture ) – 100 (brightest picture) Static Back Lighting • 101 (dimmest picture) –   200 (brightest picture) Dynamic Back Lighting: The TV automatically controls back lighting depending upon the picture level of the current prog[...]

45 206-4271 Installer Menu (Cont.) Note: Pro:Centric application updates are downloaded from the Pro:Centric server to the TV when the TV is turned ON ; however , TV E-Z Installation updates are downloaded to the TV when the TV is turned OFF . While E-Z Installation updates are in progress, it is not possible to turn ON the TV . Note: The Data Chan[...]

46 206-4271 Custom Master TV Setup This section describes how to create a customized Master TV Setup for cloning purposes when the TV is in Pass-through Mode. The Master TV Setup can used to configure either TVs that are to remain in Pass-through Mode or TVs that are to be configured for FTG Mode via CPU. Note: Cloning requirements and procedures a[...]

47 206-4271 Custom Master TV Setup (Cont.) Custom Master TV Setup Procedure 1. T urn ON the TV . The next step depends on whether the LG Setup Wizard appears on the screen when you turn ON the TV : • If the wizard is displayed , the TV is in the required factory default state. E xit the wizard, and then continue with step 2. • If the wizard is [...]

48 206-4271 Custom Master TV Setup (Cont.) (Continued from previous page) 4. Set up TV features. On-screen setup menus control the features of the TV . Press MENU on the Installer Remote to access the TV setup menus, and then set Channel, Picture, Sound, etc. options to the desired configurations. See “Clonable TV Setup Menu Features” list on p[...]

49 206-4271 Channel Banks Setup Channel Banks Overview Channel Banks enable institution administrators to create tiered channel programming on patient in-room TVs. Each channel bank may offer a custom channel lineup for a pre-determined fee. L Y770M TVs are configured with four channel banks, i.e., Channel Banks 1, 2, 3, and 4. The top tier general[...]

50 206-4271 Channel Status Options CHANNEL PREVIEW - BANK 1 CH 01 1-001 NORMAL-A DD ED Enter -> Change CC -> VCHIP Menu, Ch. Preview -> Exit • NORMAL-ADDED : The channel will appear in the channel lineup of the currently selected channel bank. • NORMAL-DELETED : The channel will not appear in the channel lineup of the currently selecte[...]

51 206-4271 Channel Banks Setup (Cont.) Inactive TV Setup T o create an inactive TV display on Channel Bank 4: 1. Press CH. BANK on the Installer Remote until Channel Bank 4 is selected, and then press CH. PREVIEW to display the Channel Preview/Banks Setup Menu. 2. P ress the SAP key on the Installer Remote to automatically delete all channels in C[...]

52 206-4271 Date _____________ Installer _____________________________________ Page ___ of ____ Location ______________________________________________________________________ Channel Banks W orksheet B A N K Channel Number 1 2 3 4 B A N K Channel Number 1 2 3 4 B A N K Channel Number 1 2 3 4 B A N K Channel Number 1 2 3 4 B A N K Channel Number 1 [...]

53 206-4271 Cloning Procedures (Continued on next page) Cloning typically refers to the process of capturing a Master TV Setup and transferring it to a T arget TV . This section describes how to save (Learn) a Master TV Setup and transfer (T each) it to a T arget TV using a USB memory device / TLX le. Y ou can also create a TLX le using the F[...]

54 206-4271 Cloning Procedures (Cont.) (Continued from previous page) 6. Use the Up/Down arrow keys to select Learn From TV (TLX) , and then press OK . CANCEL TV MANAGER USB Download Menu Diagnostics Menu Ez Download Logo Image Download Update TV Software Update PTC Software T each T o TV ( TLX) Learn From TV (TLX) 7. In the Learn From TV (TLX) scr[...]

55 206-4271 Cloning Procedures (Cont.) (Continued from previous page) Learning status will be shown in a pop-up progress banner at the bottom of the Learn From TV (TLX) screen. This process may take a few minutes. Do NOT remove the USB device until Learning is complete. When the Learning process is complete, a “Saving completed” message is disp[...]

56 206-4271 (Continued from previous page) • If the TLX le contains an FTG Channel Map that was Learned from a TV , the physical RF channels in the FTG Channel Map have been assigned logical channel numbers (see “Learning Conguration from a Master TV” above). When you T each the FTG Channel Map to the T arget TV(s), you will have the op[...]

57 206-4271 (Continued from previous page) 3. If applicable (see also “Before Y ou Begin” above), make sure to assign the appropriate Zone designation(s) in the T arget TV at this time. Note: In order for the proper location-specic TV Zone and/or Wi-Fi Zone prole data to be applied, the Zone designation(s) must be assigned in the T arget [...]

58 206-4271 Cloning Procedures (Cont.) (Continued from previous page) • If the TLX le includes an FTG Channel Map with RF channels and Aux inputs only , you can choose the format for the channel tuning/banner display . Use the arrows keys to select the desired Channel T uning / Channel Banner Display option—either Logical or Physical—at th[...]

59 206-4271 As indicated in the introduction to this document, there are two separate and distinct methods for configuring L Y770M TVs for FTG Mode of operation: one method is to configure the TV CPU for FTG Mode operation, while the other is to configure the TV EBL for FTG Mode operation. FROM A LOCAL CONFIGURA TION ST ANDPOINT , EACH OF THESE MET[...]

60 206-4271 (Continued from previous page) Note: T o remove an individual item from the FTG Configuration List or the TV Setup Menu List, click on/ highlight the item to be removed, and then click the Remove Item button directly above the applicable “List” window . T o clear both the current FTG Configuration List and TV Setup Menu List content[...]

61 206-4271 FTG CONFIGURA TION LIST Data to be saved in FTG Configuration (.tlx) file. FTG File Manager Utilities Overview Note: The data referenced in the FTG Conguration List is only a snap- shot of the current FTG Channel Map and FTG Installer Menu settings when copied to the list. If you make any change(s) to the current data to be included [...]

62 206-4271 FTG File Manager Utilities Overview (Cont.) FTG Channel Map Conguration Utility The FTG Channel Map Configuration Utility enables you to create, view , edit, and print a Logical Channel Map. PRINT MAP Click to display a printable FTG Channel Map Report. The report can also be exported as an HTML or T ext file. EDIT/ADD MAP Click to o[...]

63 206-4271 FTG File Manager Utilities Overview (Cont.) DELETE Click to remove highlighted channel from FTG Channel Map. ADD After defining a new Logical Channel, click to add channel to the FTG Channel Map. FTG Channel Map Editor The FTG Channel Map Editor shows a single Logical Channel’s data and the FTG Channel Map. EXIT Click to exit editor a[...]

64 206-4271 FTG File Manager Utilities Overview (Cont.) CONFIGURA TION SETTINGS Select tabs for categories of Installer Menu items to set up TV . FTG Installer Menu Conguration Utility Note: The Pro:Centric tab enables you to set up Pro:Centric-specic parameters. The LAN tab enables you to set up a variety of LAN features, including the Wi-Fi[...]

65 206-4271 IP Environment Setup The IP Environment Menu enables you to set up the network features of the TV . If you intend to create a Master TV Setup for cloning purposes (see Master TV Setup procedure on pages 46 to 48), all IP Environment settings, with the exception of Wired Network Connection settings and the TV name (editable in the Media [...]

66 206-4271 * PCS150R and later Pro:Centric servers do not support HRC or IRC cable channel frequencies. (Continued from previous page) RF Conguration a) Select/highlight the Media T ype eld and press OK on the Installer Remote to display the drop-down list of options. Then, use the Up/Down arrow keys to select RF . Note: If the Media T ype h[...]

67 206-4271 (Continued from previous page) Pro:Centric Application Mode Conguration Select/highlight the Mode eld and and press OK on the Installer Remote to display the drop-down list of options. Then, use the Up/Down arrow keys to select the appropriate Pro:Centric Application Mode setting— Conguration Only , FLASH , GEM , or HTML . If[...]

68 206-4271 IP Environment Setup (Cont.) Conguring a Wired Network Connection Note: If desired, you can congure both wired and wireless connections. However , note that a wired connection is always prioritized over a wireless connection. That is, when the TV is turned OFF and then back ON, if a LAN cable is detected between the TV and the net[...]

69 206-4271 IP Environment Setup (Cont.) (Continued from previous page) If the network is connected successfully , a “Connected to Internet” message will appear just below the progress display . If the network connection is not successful, the progress display will identify the network element in which the connection failed. Check your cabling [...]

70 206-4271 IP Stream Control If necessary , due to an audio and/or video stream delay , IP Stream Control options enable you to compensate for synchronization irregularities by allowing audio PTS and video PTS of fset modications. This menu also enables you to specify the IGMP version (2 or 3). Note that any modications to these settings sho[...]

71 206-4271 IP Environment Setup (Cont.) MEDIA SHARE Smart Share ENABLE Screen Share DISABLE DMR DISABLE TV Name 409KCAS1Q856 Pro:Centric Network Pre-loaded Apps ^ Media Share Setup Media Share allows you to enable Smart Share ® , Screen Share, and DMR options on this TV . • The LG Smart Share feature allows guests to use the TV to access and vi[...]

72 206-4271 IP Environment Setup (Cont.) Pre-loaded Applications This option allows you to select which of the pre-loaded application icons to display in the TV’ s Smart Launcher , which appears along the bottom of the screen. When the Pro:Centric application is disabled, the Smart Launcher is available to end users via the PORT AL button on the [...]

73 206-4271 Reference: Updating TV/PTC Software using a USB Memory Device This section describes how to update TV (CPU) and/or PTC software using the TV Manager / USB Download Menu “Update TV Software” and/or “Update PTC Software” option(s), respectively , though you may also use the Ez Download utility to update software, if desired. See ?[...]

74 206-4271 (Continued from previous page) 5. In the next screen (Update TV Software or Update PTC Software depending on your selection in step 4): • If more than one USB memory device is currently connected to the TV , be sure to select the USB device that contains the software le you wish to use. If necessary , use the Up/Down arrow keys on [...]

75 206-4271 Reference: Downloading a Splash Screen Image using a USB Memory Device This section describes how to download a splash screen image using the TV Manager / USB Download Menu “Logo Image Download” option, though you may also use the Ez Download utility to download the splash image, if desired. See “Ez Download Utility” on pages 31[...]

76 206-4271 (Continued from previous page) 5. In the Logo Image Download screen: • If more than one USB memory device is currently connected to the TV , be sure to select the USB device that contains the image le you wish to use. If necessary , use the Up/Down arrow keys on the Installer Remote to select/highlight the Select USB Memory Device [...]

77 206-4271 Reference: Power Consumption Settings The following tables assume that Installer Menu item 1 18 POWER SA VINGS is set to 3 (default) and Installer Menu item 099 BACK LIGHTING is set as shown below (default value is 255). Note: V alues are results of controlled experiments under laboratory conditions. Item 099 Back Lighting (Static) 32L [...]

78 206-4271 Reference: TV Aux Input Conguration DIRECT ACCESS T uning * TV ENABLE MPI DA T A Installer Menu Item 046 ST ART AUX SRCE (Start Aux Source) V alue Installer Menu MPI DA T A ST A TUS TYPE 0x41 SOURCES ENABLED (R/W) DA T A ST A TUS TYPE 0xD2 CURRENT A V SOURCE (R) D ATA S TAT U S TYPE 0x0D AUX SOURCE (R) Installer Menu Item 029 OLD OCV[...]

79 206-4271 Reference: b -LAN Setup & Overview A b -LAN enabled head end device, such as an LG FMA-LG101, broadcasts over the RF distribution system to communicate to multiple TVs. When the TV is first installed, it must be turned ON in order for its embedded b -LAN module to receive communication from the head end device. At this point, if it [...]

80 206-4271 Reference: FTG Mode via EBL (Local Conguration) The following steps outline local FTG configuration of individual TV EBLs using a direct PC-to-TV (EBL) connection. Refer to the Free-T o-Guest (FTG) Device Configuration Application User Guide for further information. FTG Device Conguration Application software is available online a[...]

81 206-4271 Reference: Auto Input(s) Sensing Feature This section provides detailed settings information for Installer Menu item 042 AUTO INPUTS. Note: When both item 042 AUTO INPUTS and item 041 SIMPLINK EN are enabled in the Installer Menu, HDMI inputs will be detected by SIMPLINK, but the Auto Input(s) Sensing Feature will not function. In the I[...]

82 206-4271 Reference: L Y770M Hospital Operations Hospital Features The following table identies when and how the L Y770M hospital features are supported in three different TV congurations. As indicated in the introduction to this document, LG commercial TV functionality is based on “ownership” of the Channel Map. For the purposes of thi[...]

83 206-4271 Speaker Selection The following table outlines speaker settings as determined by Installer Menu items 027 HOSPIT AL MODE and 020 FEA TURE LEVEL. Item 027 HOSPIT AL MODE V alue Item 020 FEA TURE LEVEL V alue Audio Menu TV Speaker Speaker 0 0 ~ 24 OFF None 0 0 ~ 24 ON TV Only 0 64 ~ 65 N/A Pillow Only 1 ~ 34 N/A N/A Pillow Only 65 ~ 98 N/[...]

84 206-4271 Reference: Restoring Factory Defaults on the TV(s) This section describes how to restore all factory defaults or just the Installer Menu factory defaults either on a single TV that is currently in Pass-through or FTG Mode or on multiple TVs that are currently in FTG Mode. Restore All Factory Defaults This section describes how to restor[...]

85 206-4271 Reference: Using the TV’ s Zoning Features This section describes the TV Zoning and Wi-Fi Zoning features available with the L Y770M model TVs. These features are primarily intended for use when the TV is congured for FTG Mode via CPU operation; however , Wi-Fi Zoning, along with selected elements of TV Zoning (Installer Menu and T[...]

86 206-4271 Reference: Using the TV’ s Zoning Features (Cont.) Note: While a channel can be restricted from up to eight Zones, a TV can only ever be in (set for) one Zone. See also the FTG Channel Map Editor overview on page 63. At the same time, keep in mind that the TV Zone designations are not mutually exclusive. That is, you may opt to place [...]

87 206-4271 Reference: Using the TV’ s Zoning Features (Cont.) Using the Wi-Fi Zoning Feature with Cloning Conguration A location-specic Wi-Fi conguration / TLX le may be saved (Learned) from an individual TV as part of a Master TV Setup and then be used during T eaching. First, the wireless network (i.e., the access point login data)[...]

88 206-4271 (Continued from previous page) • Label: Allows you to select a North, South, East, or West text label for this TV . Select/highlight the Label eld and press OK . Then, use the Up/Down arrow keys to select the applicable label. Press OK when you are nished. • Room Number: Allows you to specify the number of the room in which th[...]

89 206-4271 Reference: Using Media Share Features When the TV’ s Smart Share, Screen Share, and DMR options are enabled in the IP Environment / Media Share Menu (see “Accessing the IP Environment Menu” and “Media Share Setup” on pages 65 and 71, as necessary), guests have the ability to use the following Media Share features: • Smart Sh[...]

90 206-4271 Reference: Using Media Share Features (Cont.) (Continued from previous page) 4. When you initially access the Wi-Fi Direct screen, the OFF/ON toggle button at the top right of the screen is selected/highlighted by default. If Wi-Fi Direct is currently OFF , press OK on the Installer Remote to turn Wi-Fi Direct ON. This will prompt the T[...]

91 206-4271 PILLOW SPEAKER ANTENNA/ CABLE IN SPEAKER OUT LINE OUT GAME CONTROL / MPI A V IN/AUDIO IN (DVI) LAN RESET RESET UPDA TE PTC SERVICE (SERVICE ONL Y) OPTICAL DIGIT AL AUDIO OUT SERVICE TV -LINK CFG VIDEO L/MONO - A UDIO- R Reference: L Y770M Rear and Side Jack Panels UPDA TE Restricted to software updates. RESET Initiates a hardware reset [...]

92 206-4271 Reference: External Stereo Speaker Specications 1 LEFT (T ip) 2 RIGHT (Ring) 3 GROUND (Sleeve) The SPEAKER OUT / LINE OUT 3.5 mm stereo jack on the L Y770M rear panel provides stereo speaker signal outputs (xed speaker , variable speaker , or xed line level [amplier]) for external audio equipment . Set Installer Menu item 09[...]

93 206-4271 Reference: Installer Remote Control T ypical Key Functions FLASHBK MENU POWER TV LG1 TV LG2 TV Z1 TV Z2 PORTAL INFO GUIDE CH. BANK CH. PREVIEW MUTE TIMER ALARM EXIT CC SAP OK VOL VOL CH CH + + Numbers (0 - 9) & DASH Use to enter a channel or program number . Dash is used for sub-channel numbers such as 9-1, 9-2, etc. FLASHBK (Flashb[...]

94 206-4271 Reference: Pro:Centric Pillow Speaker and Patient Remote Options LG Pro:Centric pillow speakers and/or patient remotes are available for purchase (see examples at right). For additional information and/or to purchase a Pro:Centric pillow speaker or patient remote, please contact your LG service representative. Pillow Speaker and Patient[...]

95 206-4271 Reference: Pillow Speaker Setup The pillow speaker will only be functional after the Express Script/Custom Master TV Setup and/or cloning procedures are complete. Note: When Installer Menu item 027 HOSPIT AL MODE is set to 254 (factory default value), there is no power (voltage) supplied to the pillow speaker . 1 2 3 4 5 6 3 1 5 2 4 6 T[...]

96 206-4271 General Guidelines: Choosing a Location for Installing a VESA Standard Mount T o the right are some examples of VESA standard mounts. Since there are numerous types of stands and mounts available, only a few are shown here. Refer to the instruc- tions provided with the TV stand that will be used to mount the TV . Be sure the style of st[...]

97 206-4271 T roubleshooting General T roubleshooting (Some Quick and Easy T ips for Resolving Problems) Installation Symptom Possible Cause(s) Possible Solution(s) Cannot direct enter channel number . (TV in Pass-through Mode) Installer Menu item 028 CH. OVERIDE is set to 0, i.e., disabled and/or Channel Access was denied in Express Script. If the[...]

98 206-4271 T roubleshooting (Cont.) Commercial Mode Check / FTG Operation T roubleshooting TV turned ON? Ye s No Press POWER on Installer Remote. TV is not in Commercial Mode. Call T echnical Support for assistance. TV is in Commercial Mode. No On-screen menu display no longer toggles? Ye s Press MENU repeatedly as if to access the Installer Menu.[...]

99 206-4271 Channel Preview/Banks Setup Menu CHANNEL PREVIEW - BANK 1 CH 01 1-001 NORMAL-A DD E D Enter -> Change CC -> VCHIP Menu, Ch. Preview -> Exit Symptom Possible Cause Possible Solution Cannot change channel status in menu. Channel Access was denied in Express Script. Set CH. OVERIDE to 1 to allow access for channel status change. ([...]

100 206-4271 Glossary of T erms b -LAN SONIFI Solutions, Inc. proprietary RF communication system used to congure/ control TV via RF distribution system. Channel Lineup Channels set in the TV memory , via Auto T uning/manual editing. Cloning The process of capturing a Master TV Setup and transferring it to a T arget TV using a USB memory device.[...]

101 206-4271 Document Revision History / Open Source Software Notice Document Revision History Date Description January 2015 Revision A: New document January 2015 Revision B: Installer Menu update January 2015 Revision C: T itle page update Product documentation is available online at: www .LGsolutions.com . Open Source Software Notice T o obtain t[...]

206-4271 Revision C © Copyright 2015 LG Electronics U.S.A., Inc. For Customer Support/Service, please call: 1-888-865-3026 www .LGsolutions.com Pro:Idiom is a registered trademark of Zenith Electronics LLC. Pro:Centric and Smart Share are registered trademarks of LG Electronics In c. b -LAN is a trademark of SONIFI Solutions, Inc. DLNA Certied [...]