LG Electronics L1900E manuale d’uso

M ake sure to read the Important Precautions before using the product. Keep the User's Guide(CD) in an accessible place for future reference. S ee the label attached on the product and quote this information to your dealer when you require service. User ’ s Guide L1900J L1900R L1900E[...]

A1 This unit has been engineered and manufactur ed to ensure your personal safety , however impr oper use may result in potential eletrical shock or fir e hazards. In order to allow the proper operation of all safeguards incorporated in this display , observe the following basic rules for its installation, use, and servicing. On Safety Use only the[...]

A2 Impor tant Precautions On Installation Do not allow anything to rest upon or roll over the power cord, and do not place the display where the power cord is subject to damage. Do not use this display near water such as near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool. Displays are provided with venti[...]

A3 Connect with a computer . Using the Computer 1. Connect the signal cable. When attached, tighten the thumbscrews to secure the connection. Connecting with DVI-Analog signal input cable Connecting with DVI-Digital signal input cable 2. Use after connecting power cable to AC-DC power adapter and inserting it into outlet(Voltage is automatically co[...]

A4 Connecting the Displa y 3. Touch button on the front switch panel to turn the power on. When monitor power is turned on, the 'Self Image Setting Function' is executed automatically. (Only Analog Mode) NOTE ‘ Self Image Setting Function’? This function provides the user with optimal display settings.When the user connects the monito[...]

Install F or te Manager progr am. A5 This software requires Microsoft Internet Explorer 6.0 or greater. 1) Close all other applications before installing Forte Manager program. 2) Installation screen appears automatically when Forte Manager CD-ROM is inserted. 3) Forte Manager Install Shield Wizard start screen appears. 4) Select [Installation Lang[...]

A6 Install F or te Manager progr am. ■ For te Manager Program Function PICTURE - Tracking, Brightness, Contrast , Position, Resolution , Sharpness, Wizard, Preset f -Engine - MOVIE, TEXT, NORMAL, USER, Preset Color - Color Temp. RGB, Color Calibration, Preset Options - Preferences, Power Indicatort, Preset Support - Update, Help, Asset Id, Versio[...]

A7 Control P anel Functions Front Panel Controls Rear L1900E Control Function Power Button Product may be turned on when you touch the button, and turned off when you touch it once again. * Check Power Indicator after touching Power Button. Power Indicator Power indicator is blue or red when the product is on, and it automatically blinks in Sleep m[...]

A8 Control P anel Functions Front Panel Controls L1900J L1900R Control Function Power Button Product may be turned on when you touch the button, and turned off when you touch it once again. Power Indicator Power Indicator is blue or red when the product is on and it automatically repeats from dark to bright mode in Sleep mode (Energy Saving). [L190[...]

DDC/CI ON/OFF Function A9 DDC/CI ON/OFF Funtion Display is on when Power button is touched, and DDC/CI is ON/OFF when Power button is touched more than a few seconds. * Initial Setup Status is DDC/CI ON. DDC/CI(Display Data Channel Command Interface) is communication protocol for communications between PC and monitor . DDC/CI makes it possible to a[...]

A10 T roub leshooting No image appears Check the following before calling for service. No image appears Is the power cord of the display connected? Does power indicator blink or from dark to bright mode is repeated? Do you see an "OUT OF RANGE" message on the screen? Do you see a "CHECK SIGNAL CABLE "message on the screen? Check[...]

A11 T roub leshooting Display image is incorrect Display Position is incorrect. On the screen background, vertical bars or stripes are visible. Any horizontal noise appearing in any image or characters are not clearly portrayed. The screen color is mono or abnormal. The screen blinks. Press Forte Manager Program --> Picture --> Tracking-->[...]

A12 T roub leshooting Have you installed the display driver? Have you installed the display driver? Do you see an "Unrecognized monitor, Plug&Play (VESA DDC) monitor found" message? Be sure to install the display driver from the display driver CD (or diskette) that comes with your display. Or, you can also download the driver from our[...]

A13 Specifications NOTE Information in this document is subject to change without notice. 19 inches (48.19cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating 19 inches viewable 0.294mm pixel pitch Horizontal Freq. 30 - 83kHz (Analog) 30 - 71kHz (Digital) Vertical Freq. 56 - 75Hz (Automatic) Input Form Separate TTL, Positive/Negative SOG (Sync O[...]

A14 Specifications Preset Modes (Resolution) Display Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz) 1 2 3 4 5 6 7 8 9 10 11 *12 **13 640 x 350 720 x 400 640 x 480 640 x 480 800 x 600 800 x 600 832 x 624 1024 x 768 1024 x 768 1152 x 870 1152 x 900 1280 x 1024 1280 x 1024 31.469 31.468 31.469 37.500 37.879 46.875 49.725 48.363 60.023 6[...]

A15 Specifications Kensington Security Kensington Security Slot Connected to a locking cable that can be purchased separately at most computer stores Product color represented here may differ from actual product color that customer purchased. Tip[...]

Digitally yours[...]