LG Electronics W2043SE manuale d’uso

www .lg.com O WNER’S MANU AL L CD MONIT OR L CD MONIT OR MODELS W19 43SB W19 43TB W2043SE W2043TE W22 43S W22 43T Please read this manual caref ully befor e operating your se t and re tain it f or futur e ref erenc e. ENGLISH[...]

1 This unit has been engineered and manufactured to ensure your personal safety, however improper use may result in potential electrical shock or fire hazards. In order to allow the proper operation of all safeguards incorporated in this display, observe the following basic rules for its installation, use, and servicing. On Safety Use only the powe[...]

2 Important Precautions On Installation Do not allow anything to rest upon or roll over the power cord, and do not place the display where the power cord is subject to damage. Do not use this display near water such as near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool. Displays are provided with ventila[...]

Important Precautions 3 On Cleaning Unplug the display before cleaning the face of the display screen. Use a slightly damp (not wet) cloth. Do not use an aerosol directly on the display screen because over-spraying may cause electrical shock. When cleaning the product, unplug the power cord and scrub gently with a soft cloth to prevent scratching. [...]

4 Accessories !!! Thank for selecting LGE products !!! Please make sure the following items are included with your monitor . If any items are missing, contact your dealer . IMPORTANT This accessories may look different from those shown here. User must use shielded signal interface cables (D-sub 15 pin cable, DVI cable) with ferrite cores to maintai[...]

5 Connecting the Display Before setting up the monitor , ensure that the power to the monitor , the computer system, and other attached devices are turned off. Connecting and Disassembling the stand 1. Place the monitor face down on the soft cloth. 2. Assemble the Stand Base into the Stand Body in the correct direction. Stand Base Stand Body 3. Tur[...]

6 Connecting the Display IMPORTANT This picture depicts the general model of connection. Your monitor may differ from the items shown in the picture. Do not carry the product upside down holding only the stand base. The product may fall and get damaged or cause injury. 5. Turn the Stand Base Lock through 90˚ to separate the Stand Base from the Sta[...]

7 Connecting the Display Before setting up the monitor , ensure that the power to the monitor , the computer system, and other attached devices is turned off. Positioning your display -After installation, adjust the angle as shown below . 1. Adjust the position of the panel in various ways for maximum comfort. Tilt Range : -5˚~15˚ ERGONOMIC It is[...]

8 Connecting the Display W1943TB/W2043TE/W2243T NOTE ‘ Self Image Setting Function’? This function provides the user with optimal display settings.When the user connects the monitor for the first time, this function automatically adjusts the display to optimal settings for individual input signals. ‘AUTO/SET’ Function? When you encounter pr[...]

9 Connecting the Display W1943SB/W2043SE/W2243S NOTE ‘ Self Image Setting Function’? This function provides the user with optimal display settings.When the user connects the monitor for the first time, this function automatically adjusts the display to optimal settings for individual input signals. ‘AUTO/SET’ Function? When you encounter pr[...]

10 Control Panel Functions Front Panel Controls Button Use this button to enter 4:3 IN WIDE , PHOTO EFFECT menus. For more information, refer to page 14. MENU Button Use this button to enter or exit the On Screen Display. OSD LOCKED/UNLOCKED This function allows you to lock the current control settings, so that they cannot be inadvertently changed.[...]

11 Control Panel Functions Use this button to enter a selection in the On Screen Display. AUTO/SET Button AUTO IMAGE ADJUSTMENT When adjusting your display settings, always press the AUTO/SET button before entering the On Screen Display(OSD). (Only Analog Mode) This will automatically adjust your display image to the ideal settings for the current [...]

12 On Screen Display (OSD) Control Adjustment Screen Adjustment Making adjustments to the image size, position and operating parameters of the display is quick and easy with the On Screen Display Control system. A short example is given below to familiarize you with the use of the controls. The following section is an outline of the available adjus[...]

13 NOTE The order of icons may differ depending on the model (13~19). On Screen Display(OSD) Selection and Adjustment The following table indicates all the On Screen Display control, adjustment, and setting menus. Main menu Sub-menu Description MOVIE INTERNET USER NORMAL DEMO To select or customize desired image settings F-ENGINE LANGUAGE OSD POSIT[...]

14 On Screen Display(OSD) Selection and Adjustment The following OSD screen will appear when you press the button on the front of the monitor. Main menu Description MENU : Exit : Move SET : Select 4:3 IN WIDE To select the image size of the screen. • WIDE : Switch to full screen mode according to input image signal. • 4:3 : Change the input ima[...]

15 On Screen Display(OSD) Selection and Adjustment Icons Menu Name Sub-menu Name Main menu Sub menu Description To adjust the USER sub-menu function, press the AUTO/SET Button MOVIE INTERNET NORMAL DEMO USER When the F-ENGINE is executed, the screen is split to show the effects of the selected function. The active state is to the left and the inact[...]

16 On Screen Display(OSD) Selection and Adjustment You were introduced to the procedure of selecting and adjusting an item using the OSD system. Listed below are the icons, icon names, and icon descriptions of the all items shown on the Menu. Sub- menus NOTE OSD (On Screen Display) menu languages on the monitor may differ from the manual. Menu Name[...]

17 On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description PICTURE MENU : Exit : Decrease : Increase SET : Select another sub-menu BRIGHTNESS CONTRAST GAMMA To adjust the brightness of the screen. To adjust the contrast of the screen. Set your own gamma value. : -50 / 0 / 50 On the monitor, high gamma values display whitish i[...]

18 On Screen Display(OSD) Selection and Adjustment TRACKING Main menu Sub menu Description MENU : Exit : Decrease : Increase SET : Select another sub-menu CLOCK PHASE SHARPNESS To minimize any vertical bars or stripes visible on the screen background. The horizontal screen size will also change. To adjust the focus of the display. This item allows [...]

19 On Screen Display(OSD) Selection and Adjustment Press the , buttons to reset immediately. SETUP MENU : Exit : Adjust : Adjust SET : Select another sub-menu Main menu Sub menu Description To choose the language in which the control names are displayed. To adjust position of the OSD window on the screen. LANGUAGE OSD POSITION WHITE BALANCE If the [...]

20 T roubleshooting No image appears Check the following before calling for service. No image appears Do you see a "OSD LOCKED" message on the screen? ● Is the power cord of the display connected? ● Is the power indicator light on? ● Is the power on and the power indicator red? ● Is the power indicator blinking? ● Do you see an [...]

21 T roubleshooting Display image is incorrect ● Display Position is incorrect. ● On the screen background, vertical bars or stripes are visible. ● Any horizontal noise appearing in any image or characters are not clearly portrayed. • Press the AUTO/SET button to automatically adjust your display image to the ideal setting. If the results a[...]

22 T roubleshooting Display image is incorrect ● The screen color is mono or abnormal. ● The screen blinks. • Check if the signal cable is properly connected and use a screwdriver to fasten if necessary. • Make sure the video card is properly inserted in the slot. • Set the color setting higher than 24 bits (true color) at Control Panel -[...]

23 Specifications W1943TB 18.51 inches (47.01 cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size : 47.01 cm 0.30 x 0.30 mm (Pixel pitch) Display Horizontal Freq. 30 - 61 kHz (Automatic) Vertical Freq. 56 - 75 Hz (Automatic) Input Form Separate Sync. SOG (Sync On Green), Digital Sync Input Signal Input 15 pin D-Sub Connect[...]

24 Specifications W1943SB 18.51 inches (47.01 cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size : 47.01 cm 0.30 x 0.30 mm (Pixel pitch) Display Horizontal Freq. 30 - 61 kHz (Automatic) Vertical Freq. 56 - 75 Hz (Automatic) Input Form Separate Sync. SOG (Sync On Green) Sync Input Signal Input 15 pin D-Sub Connector Input [...]

25 Specifications W2043TE 20.0 inches (50.8 cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size : 50.8 cm 0.2766 x 0.2766 mm (Pixel pitch) Display Horizontal Freq. 30 - 83 kHz (Automatic) Vertical Freq. 56 - 75 Hz (Automatic) Input Form Separate Sync. SOG (Sync On Green), Digital Sync Input Signal Input 15 pin D-Sub Connec[...]

26 Specifications W2043SE 20.0 inches (50.8 cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size : 50.8 cm 0.2766 x 0.2766 mm (Pixel pitch) Display Horizontal Freq. 30 - 83 kHz (Automatic) Vertical Freq. 56 - 75 Hz (Automatic) Input Form Separate Sync. SOG (Sync On Green) Sync Input Signal Input 15 pin D-Sub Connector Input[...]

27 Specifications W2243T 21.53 inches (54.686 cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size : 54.686 cm 0.248 x 0.248 mm (Pixel pitch) Display Horizontal Freq. 30 - 83 kHz (Automatic) Vertical Freq. 56 - 75 Hz (Automatic) Input Form Separate Sync. SOG (Sync On Green), Digital Sync Input Signal Input 15 pin D-Sub Conn[...]

28 Specifications W2243S 21.53 inches (54.686 cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size : 54.686 cm 0.248 x 0.248 mm (Pixel pitch) Display Horizontal Freq. 30 - 83 kHz (Automatic) Vertical Freq. 56 - 75 Hz (Automatic) Input Form Separate Sync. SOG (Sync On Green) Sync Input Signal Input 15 pin D-Sub Connector Inp[...]

29 Specifications Preset Modes (Resolution) Display Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz) 1 2 3 4 5 6 7 8 *9 720 x 400 640 x 480 640 x 480 800 x 600 800 x 600 832 x 624 1024 x 768 1024 x 768 1360 x 768 31.468 31.469 37.500 37.879 46.875 49.725 48.363 60.123 47.712 70 60 75 60 75 75 60 75 60 VGA VGA VESA VESA VESA MAC VESA VE[...]

30 Specifications Display Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz) 1 2 3 4 5 6 7 8 9 10 11 *12 720 x 400 640 x 480 640 x 480 800 x 600 800 x 600 1024 x 768 1024 x 768 1152 x 864 1280 x 1024 1280 x 1024 1680 x 1050 1920 x 1080 31.468 31.469 37.500 37.879 46.875 48.363 60.123 67.500 63.981 79.976 65.290 67.500 70 60 75 60 75 60 7[...]

31 Installing the W all mount plate This monitor satisfies the specifications of the W all mount plate or the interchange device. 1. Place the monitor face down on the soft cloth. 2. Turn the Stand Base Lock through 90 ˚ to separate the Stand Base from the Stand Body. <Unlocked> 3. Pull out the Stand Base to remove. If you can't release[...]

32 Installing the W all mount plate 4 . Install the Wall mount plate. Wall mount plate(Separate purchase) This is stand-type or wall mount type and is connectable with Wall mount plate. Please refer to the installation guide for more details, which is provided when Wall mount plate is purchased. LG recommends that wall mounting be performed by a qu[...]

Make sure to read the Safety Precautions befor e using the product . Keep the User ’s Guide(CD ) in an accessible place f or furture r eference. The model and serial number of the SET is located on the back and one side of the SET . Rec ord it below should y ou ever need ser vice. MODEL SERIAL[...]