LG 19CNT42K-B manuale d’uso

ww w .lg.c om O WNER'S MANU AL CL OUD MONIT OR (LED MONIT OR) 19CNT42K Please r ead the safe t y inf ormation carefully bef or e using the product . CL OUD Monit or(LED Monitor) Model English[...]

2 ENG English T able of Contents T ABLE OF CONTENTS 3 ASSEMBLING AND PREP ARING 3 Unpacking 4 Parts and buttons 5 Lifting and moving the Monitor 5 Setting Up the Monitor set 5 - Attaching the Stand Base 6 - Mounting on a table 6 - Adjusting the angle 7 - Adjusting the stand height 7 - Using the Kensington locking device 8 - Detaching the stand base[...]

3 ENG English ASSEMBLING AND PREP ARING ASSEMBLING AND PREP ARING Unpacking Please check whether all the components are included in the box before using the product. If there are missing components, contact the retail store where you purchased the product. Note that the product and components may look different from those shown here. y Only use an [...]

4 ENG English ASSEMBLING AND PREP ARING Parts and buttons Power Indicator y LED On : Power is on y LED Off: Power is of f Front Side Buttons Input Connectors (See p.12 to 15) (Power Button) Input Connectors (See p.15 ) 1 1[...]

5 ENG English ASSEMBLING AND PREP ARING Setting Up the Monitor set Attaching the Stand Base 1 Place the monitor's screen face down. y T o protect the sc reen from scratches, cover the surface with a soft cloth. 3 Using a coin, turn the screw clockwise to se- cure the stand base. 2 Check the position (at the front and rear) of the stand body , [...]

6 ENG English ASSEMBLING AND PREP ARING Adjusting the angle 1 Place the monitor mounted on the stand base in an upright position. 2 Adjust the angle of the screen. The angle of the screen can be adjusted up to 5° forwards and 15° backwards for a comfortable viewing experience. y T o avoid injury to the fingers when adjusting the screen, do not ho[...]

7 ENG English ASSEMBLING AND PREP ARING U s i n g t h e K e n s i n g t o n l o c k i n g device The connector for the Kensington lock is located on the rear of the monitor . For more information on installation and usage, refer to the Kensington lock user manual or visit the website at http://www .kensington.com. Connect the monitor to the table w[...]

8 ENG English ASSEMBLING AND PREP ARING Detaching the stand body 1 Place the monitor's screen face down. T o protect the screen from scratches, cover the surface with a soft cloth. 2 Using a screwdriver , remove the four screws and detach the stand from the monitor . y The components appearing in the illustra- tions may look different from the[...]

9 ENG English ASSEMBLING AND PREP ARING Swivel stand y Image shown may differ from your Monitor set. 1 Swivel 90 degrees and adjust the angle of the Monitor set to suit your view . 1 Lift the monitor to its highest height to utilize the Pivot function. Using the Pivot function The pivot function allows you to rotate the screen 90 degrees clockwise.[...]

10 ENG English ASSEMBLING AND PREP ARING 10 cm 10 cm 10 cm 10 cm If you intend to mount the Monitor set to a wall, attach W all mounting interface (optional parts) to the back of the set. When you install the Monitor set using a wall mounting interface (optional parts), attach it carefully so it will not drop. 1 Please, Use the screw and wall mount[...]

11 ENG English ASSEMBLING AND PREP ARING y Unplug the power cord before moving or in- stalling the monitor to avoid electric shocks. y Installing the monitor on the ceiling or on a slanted wall may result in the monitor falling off, which could lead to injury . Please use a LG wall mounting bracket when using a VESA mount. For more information, con[...]

12 ENG English USING THE MONITOR SET USING THE MONIT OR SET C o n n e c t i n g I n p u t S i g n a l C a b l e y This monitor supports the *Plug and Play feature. *Plug and Play: A feature that allows you to add a device to your computer , without having to reconfigure anything or install any manual drivers. D-SUB IN connection - PC D-SUB IN trans[...]

13 ENG English USING THE MONITOR SET DVI connection T ransfers digital video signals from the Cloud Mon- itor to an extended monitor . Connect the Cloud Monitor to an extended monitor using a DVI cable. y T o connect the monitor to a computer , use the appropriate signal cable (LAN and D- SUB). y A converter can be used to convert the DVI- D input [...]

14 ENG English USING THE MONITOR SET C o n n e c t i n g L A N / P e r i p h e r a l s LAN connection Connect the router or switch to the monitor using a LAN cable as illustrated below . y The LAN cable is sold separately . y The following LAN cable type can be used: Standard: IEEE 802.3 ETHERNET y If a device is connected into the earphone out por[...]

15 ENG English USING THE MONITOR SET y Peripheral devices are sold separately . y The USB ports on the left and bottom of the monitor can be used to connect the key- board, mouse, and other USB devices. y Cables with angled plugs may have clear- ance issues, use straight plugs when pos- sible. Angle T ype Straight T ype Peripheral device connection[...]

16 ENG English USING THE MONITOR SET y What is "Self Image Adjustment"? This func- tion runs when the monitor is connected for the first time and performs automatic image adjustment for each signal (only available for analog [D-SUB input] signals) to provide an optimal screen display . Self Image Adjustment Press the power button on the f[...]

17 ENG English CUSTOMIZING SETTINGS CUST OMIZING SETTINGS 1 Press the desired button on the bottom of the Monitor set. 2 Change the value of the menu item by pressing the buttons on the bottom of the Monitor set. T o return to the upper menu or set other menu items, use the up arrow ( ) button. 3 Select EXIT to leave the OSD menu. Monitor set Butto[...]

18 ENG English CUSTOMIZING SETTINGS Customizing Settings Menu Settings 1 Press MENU button on the bottom of the Monitor set to display the MENU OSD. 2 Set the options by pressing the ◄ or ► or ▼ buttons. 3 Select the " NEXT MENU " button to enter the more option settings. 4 Select EXIT to leave the OSD menu. T o return to the upper [...]

19 ENG English CUSTOMIZING SETTINGS PICTURE 1 Press MENU button on the bottom of the Monitor set to display the MENU OSD. 2 Select the " NEXT MENU " button to enter the more option settings. 3 Enter to PICTURE by pressing the ▼ button. 4 Set the options by pressing the ◄ or ► buttons. 5 Select EXIT to leave the OSD menu. T o return [...]

20 ENG English CUSTOMIZING SETTINGS COLOR 1 Press MENU button on the bottom of the Monitor set to display the MENU OSD. 2 Select the " NEXT MENU " button to enter the more option settings. 3 Select COLOR by pressing the ► button. 4 Enter to COLOR by pressing the ▼ button. 5 Set the options by pressing the ◄ or ► or ▼ buttons. 6 [...]

21 ENG English CUSTOMIZING SETTINGS DISPLA Y 1 Press MENU button on the bottom of the Monitor set to display the MENU OSD. 2 Select the " NEXT MENU " button to enter the more option settings. 3 Select DISPLA Y by pressing the ► button. 4 Enter to DISPLA Y by pressing the ▼ button. 5 Set the options by pressing the ◄ or ► or ▼ bu[...]

22 ENG English CUSTOMIZING SETTINGS OTHERS 1 Press MENU button on the bottom of the Monitor set to display the MENU OSD. 2 Select the " NEXT MENU " button to enter the more option settings. 3 Select OTHERS by pressing the ► button. 4 Enter to OTHERS by pressing the ▼ button. 5 Set the options by pressing the ◄ or ► or ▼ buttons.[...]

23 ENG English CUSTOMIZING SETTINGS VOLUME 1 Press the VOL button at the bottom of the monitor to display the VOL OSD menu. 2 Press the ◄ or ► button to adjust the volume. 3 Press the button to enable or disable Mute. 4 Select EXIT to leave the OSD menu. Each option is explained below . MENU > NEXT MENU > VOLUME Description VOLUME Adjusts[...]

2 4 ENG English T roubleshooting TROUBLESHOOTING Nothing is displayed on the screen I s t he mo n it o r' s p o we r c o rd pl u gg e d i n? y Check if the power cord is correctly plugged in to the outlet. Is the power indicator on? y Check the power indicator . Is the power indicator displaying as red? y Adjust the brightness and the contrast[...]

25 ENG English T roubleshooting The image is displayed abnormally . Does the display area appear un- centered? Pressing the AUTO button will automatically optimize the screen to the current display mode. Does the screen exhibit vertical lines? Pressing the AUTO button will automatically optimize the screen to the current display mode. Does the scre[...]

26 ENG English Product Specication PRODUCT SPECIFICA TION LCD Screen T ype 48.1 cm (19 inch) TFT (Thin Film T ransistor) LCD (Liquid Crystal Display) Screen Diagonal length of the screen: 48.1 cm Pixel Pitch 0.2835 mm x 0.2835 mm Resolution Maximum Resolution 1440 x 900 @ 60 Hz Recommended Resolution 1440 x 900 @ 60 Hz DVI-D output 1920 x 1200 @[...]

27 ENG English Product Specication Preset Mode 19CNT42K Display Modes (Resolution) Horizontal Frequency (kHz) V ertical Frequency (Hz) Polarity (H/V) Remark 720 x 400 31.468 70.08 -/+ 640 x 480 31.469 59.94 -/- 800 x 600 37.879 60.317 +/+ 1024 x 768 48.363 60 -/- 1440 x 900 55.935 59.888 -/+ Recommended Mode Power Indicator Mode LED Color On Mod[...]

28 ENG English Proper Posture PROPER POSTURE Proper posture for using the monitor Adjust the angle so that the screen is slightly lower than your eyes. y Using the monitor for a prolonged period of time can cause eye fatigue. T ake a 10-minute break every hour . y The stand is designed to best support the monitor when the optimal conditions are sel[...]

29 ENG English USING CITRIX CLOUD MONITOR USING CITRIX CLOUD MONIT OR Login screen This screen is displayed when power is turned on. Power Button Click the Power button to turn the system off or restart it in the login screen. Login Window Enter a user name, password and domain to ac- cess the VDI server . Power Off Menu Select the Power Off menu a[...]

30 ENG English USING CITRIX CLOUD MONITOR Settings button Y ou can set the network, server or language for using a network monitor . Language Set a language to use on the network monitor home screen. After setting the language, click the 'OK' button. The default is English. Network Set a wired/wireless network. (Support for the wireless c[...]

31 ENG English USING CITRIX CLOUD MONITOR Wired connection setting y Ethernet speed setting: Set the network speed. Y ou can select Auto-Detect, 10Mbps, 100Mbps or 1000Mbps. y DHCP setting: Set the DHCP mode. If it is set to On, an IP is automatically fetched from a DHCP server and used. y Static connection setting: If DHCP is set to Off, the i npu[...]

32 ENG English USING CITRIX CLOUD MONITOR y Connect Automatically: This option connects an IP automatically if it is disconnected. y DHCP setting: Set the DHCP mode. If it is set to On, an IP is automatically fetched from a DHCP server and used. y Static connection setting: If DHCP is set to Off, the i nput window is displayed for detailed setting.[...]

33 ENG English USING CITRIX CLOUD MONITOR Screen Output Setting Primary display setting y Resolution: Select the resolution of a moni- tor . 19CNT42K : The network monitor supports 2 resolutions including Auto, 1440x900, 1024x768. When it is set to Auto, the monitor is auto- matically adjusted to the optimal resolution. y Rotation: Set the angle of[...]

34 ENG English USING CITRIX CLOUD MONITOR Secondary display setting y Resolution: Select the resolution of a moni- tor . Among the resolutions supported in the DVI monitor , 1024x768 or higher resolutions and Auto menu are displayed. When it is set to Auto, the monitor is auto- matically adjusted to the optimal resolution. y Rotation: Set the angle[...]

35 ENG English USING CITRIX CLOUD MONITOR Factory reset The system is reset to factory defaults and reboot- ed. All user settings are removed. Information button General T ab Display the hardware and software information of a network monitor . y Hardware Information: Network monitor mod- el name and asset number . The asset number can be set in eZ-[...]

36 ENG English USING CITRIX CLOUD MONITOR Network T ab Display network related information. y Network Information: VDI/eZ-CMS server IP address information y Wired Connection: IP address and MAC ad- dress of a wired network y Wireless Connection: IP address and MAC address of a wireless network Ping T ab By pinging, you check the network connection[...]

MODEL SERIAL Mak e sur e t o re ad the Saf et y Pre caution s bef ore using the pr oduct . K eep the Owner ’s Manual ( CD ) in an a cces sible place f or f uture r ef erenc e. The mo del and s erial num ber of th e SET is locat ed on t he back a nd one sid e of the SET . R ecor d it belo w should you ever n eed service. As an ENERG Y ST AR Partne[...]