Linksys EtherFast FENSK05 v2 manuale d’uso

EtherFast ® Series 10/100 Network In a Bo x Model No.: FENSK05 v2 User Guide[...]

COPYRIGHT & TRADEMARKS Copyright © 2000 Linksys, All Rights Reserved. EtherFast is a registered trademark of Linksys. Microsoft, Windows, and the Windows logo are r egistered trademarks of Microsoft Corporation. All other trademarks and brand names are the pr operty of their respective proprietors. LIMITED WARRANTY Linksys guarantees that ever[...]

Linksys EtherFast ® Series 10/100 Network In a Box Introduction The Linksys EtherFast 10/100 Network In a Box The Linksys 10/100 Netw ork In a Box comes with e verything you need to get a net- w ork up and running in minutes. Plug in the cards, attach the provided netw ork cab les, install the software dri vers, and go! Built to run with the faste[...]

10/100 Network In a Box Getting to Know the EtherFast 10/100 Network In a Box The EtherFast 10/100 LAN Card Y ou will install one EtherF ast 10/100 LAN Card into each computer you wish to netw ork. The Card’ s LEDs Link/Act The Link LED will illuminate when the card has been suc- cessfully connected to a netw ork and flicker when data is being tr[...]

The Hub’ s Ports 1-5 P orts 1-5 are where you will connect y our PCs to the hub . It is through these ports that network information is exchanged. Uplink Y ou can e xpand your netw ork by connecting your hub to another hub, switch, router or Broadband modem through the Uplink port. If the Uplink por t is being used , the port adjacent to it will [...]

10/100 Network In a Box 5. Once your EtherF ast EtherF ast 10/100 LAN Card is firmly in place , secure its fastening tab to your PC's chassis with a mounting scre w . 6. Replace your PC's co ver . 7. Connect one end of a twisted-pair cable to your PC at the EtherF ast 10/100 LAN Card's RJ-45 por t. 8. Plug the other end of the cable [...]

10/100 Network In a Box 9 Windows 98 Installation & Setup Overview After physicall y installing the EtherF ast 10/100 LAN Card in your computer , follo w these instructions to install the network dri ver . The installation proce- dure for the netw ork driv er will vary slightly depending on w hich version of W indo ws 98 you are using, and on y[...]

10/100 Network In a Box Linksys EtherFast ® Series 4. Select "Search for the best driv er for your de vice (Recommended). ” Click Next. 5. Select "Floppy disk dri ves". Click Ne xt to continue. 6. A windo w will open sa ying that W indo ws is no w ready to install the Linksys LNE100TX F ast Ethernet Adapter driv er (seen on the ne[...]

10/100 Network In a Box 13 Linksys EtherFast ® Series 12 Network Component Configuration 1. Once you are back at the W indo ws 98 desktop, click on your taskbar's Start button, then Settings , then Control P anel , and then doub le-click the Networ k icon. 2. The Netw ork windo w will appear . Click on the Configuration tab. A windo w similar[...]

10/100 Network In a Box 15 Linksys EtherFast ® Series 14 8. Click on the Identif ication tab . T ype the name of your computer in the Computer Name box. Choose a name that is unique from the other com- puter names on the netw ork. 9. T ype the name of your wor kgr oup in the W orkgr oup box. The W orkgroup name should be the same W orkg roup Name [...]

10/100 Network In a Box 17 Linksys EtherFast ® Series 16 14. A Lo gon windo w will appear , requiring you to enter a User name and P assw ord . Make up a user name and pass w ord (if you ha ven’ t already) and click OK . Do not click the Cancel button or Escape key . Clicking either of these buttons will prev ent you from lo gging into the netw [...]

10/100 Network In a Box 19 Linksys EtherFast ® Series 18 Installing the Driver in Windows 95 V ersion B 1. While the Update Device Driver W izard windo w is visib le (previous page), put the EtherF ast Card 10/100 LAN Card Driv er Disk into your flopp y driv e and click Next . 2. W indows 95 will f ind the Linksys LNE100TX F ast Ethernet Adapter ([...]

10/100 Network In a Box 21 Linksys EtherFast ® Series 20 Network Component Configuration 1. Once you are back at the W indo ws 95 desktop, click on your taskbar's Start button, then Settings , then Control P anel , and then doub le-click the Networ k icon. 2. The Netw ork windo w will appear . Click on the Configuration tab. A windo w similar[...]

10/100 Network In a Box 23 Linksys EtherFast ® Series 22 8. Click on the Identif ication tab . T ype the name of your computer in the Computer Name box. Choose a name that is unique from the other com- puter names on the netw ork. 9. T ype the name of your w orkgroup in the W or kgr oup box. The W orkgroup name should be the same W orkgroup Name i[...]

10/100 Network In a Box 25 Linksys EtherFast ® Series 11. Optional : Choose the Access Control tab. Ensure that Shar ed-level access contr ol is selected. If the setting is on User-Le vel access control and you can’ t change it, skip to problem 5 in the T roubleshooting section on page 45. 12. Click the OK button. Y our system ma y or ma y not a[...]

10/100 Network In a Box 27 Linksys EtherFast ® Series 26 3. The Install Hardware Device Driv ers dialog bo x will appear . When Ethernet Contr oller is display ed , select “Search f or a suitab le driver f or your device (Recommended)” . Click Ne xt . 4. The Locate Driver Files dialog bo x will appear . Select “Specify a loca- tion” . Clic[...]

10/100 Network In a Box 7. The Completing the F ound New Hardwar e Wizard dialog box will appear .The follo wing adapter name will be sho wn: Linksys LNE100TX F ast Ethernet Adapter (LNE100TX v4). Click Finish . 8. Remo ve the dri ver disk from the floppy dri ve. The Windo ws 2000 driv er installation is complete. If you want to shar e f iles or pr[...]

10/100 Network In a Box 31 Linksys EtherFast ® Series 30 3. Click on the Select from list... button to select a netw ork adapter . 4. Click on the Ha v e Disk button. Insert the EtherF ast 10/100 LAN Car d Driver Disk into driv e A. T ype a: into the box on y our screen and hit OK . 5. Highlight the Linksys LNE100TX F ast Ethernet Adapter (LNE100[...]

10/100 Network In a Box 33 Linksys EtherFast ® Series 32 8. A list of services will appear . Click Next to appro ve these services, fol- lo w ed by Ne xt again. 9. NT will probabl y ask you to suppl y your original Windo ws NT CD-R OM or setup disks. If so, place your W indo ws NT CD-R OM in your CD dri ve. If the CD-R OM loads a pop-up window , c[...]

10/100 Network In a Box 35 Linksys EtherFast ® Series 34 13. Click Finish . When ask ed if you w ant to restart your computer , remo ve the Driv er Disk and click Ye s . 14. Once your PC has rebooted and y ou are logged in, doub le-click the Networ k Neighborhood icon on your desktop. Ensure that y ou ha ve access to the netw ork. If you do, y our[...]

10/100 Network In a Box 37 Linksys EtherFast ® Series 36 3. When the list of a vailable netw ork adapters appears, click the Ha ve Disk button. 4. Put the EtherF ast Card disk into drive A. T ype a: into the box on y our screen and click OK . 5. Highlight the Linksys LNE100TX F ast Ethernet Adapter (LNE100TX v4) entry in the window that appears. [...]

10/100 Network In a Box 10. Remo ve y our Driv er Disk and CD-R OM and click Ye s to restart your PC. 11. Once your PC has rebooted , double-click the Netw ork Neighborhood icon on your desktop. Ensure that y ou ha ve access to the netw ork. If you do, your card has been properl y installed. • If you had pr eviously installed an y NT service pack[...]

10/100 Network In a Box 41 Linksys EtherFast ® Series 40 5. If the LAN driv er is not located in the default directory , specify the f ile's path on the command line. The LO AD command prompts you for the con- f iguration parameters if they are not supplied on the command line. 6. At the server command line, type (for example): LOAD c:LNE100[...]

10/100 Network In a Box 13. Arrow do wn the list that appears and choose which protocols you w ant to install. Press F10 to sa ve. 14. Highlight Sa v e P arameters and Load Driv er . Press Enter . 15. Y our PC will examine the netw ork. This ma y take a fe w minutes. 16. Y ou ma y be prompted several times for a netw ork on which to bind IPX to LNE[...]

10/100 Network In a Box 45 Linksys EtherFast ® Series 44 5. On the Access Control T ab, User Level Access is selected, but Shared Level Access is grayed out and not accessible . • Y ou pre viousl y had your primary netw ork logon set to Client f or NetW are Networ ks . On the Conf iguration tab of the Networ k Properties window , ensure that you[...]

10/100 Network In a Box 47 Linksys EtherFast ® Series 46 • Click on the IRQ Steering tab . Remo ve the check from Use IRQ Holder and click OK . W indows will ask y ou to restart the PC (if it doesn’t ask you, then reboot the PC manuall y). • After the computer boots up, W indo ws will try to re-detect the PCI Steering. Continue rebooting the[...]

10/100 Network In a Box 49 Appendix Sharing Y our Files and Printers Overview By sharing your f iles and printers, other PCs on your netw ork will be able to access the resources on your PC. Before sharing your f iles and printers, you should prepare your computer to be used with any f ile servers that may be on the netw ork. If you are not using W[...]

10/100 Network In a Box 51 Linksys EtherFast ® Series 50 Installing the Driver in Windows 95 V ersion A 1. W indows 95 will detect the EtherF ast card and display a Ne w Har dwar e F ound window . 2. Slide the EtherF ast Card Driver Disk into drive A. 3. Select Driver fr om disk pr o vided by har dwar e manufactur er , then click OK . 4. When ask [...]

10/100 Network In a Box 53 Linksys EtherFast ® Series 52 Windows 98 or 95 Client for Windows NT If you are installing the EtherF ast 10/100 Card in a W indo ws 95 or 98 PC that you plan on lo gging into a NT domain server , follo w the directions belo w . 1. F ollo w the W indo ws 95 setup instructions or the W indo ws 98 setup instructions 2. Sta[...]

10/100 Network In a Box 55 Linksys EtherFast ® Series 54 4. Remov e any instance of the name Linksys in the bo x. This includes IPX/SPX…Linksys , NetBEUI…Linksys , and TCP/IP…Linksys . Also remo ve Client for Micr osoft Networ ks , Client for NetW ar e Networ ks , and F ile and Printer Sharing for Micr osoft Networks . In some cases, remo vi[...]

10/100 Network In a Box 57 Linksys EtherFast ® Series 56 Starting Over in Windows 2000 1. Click the Star t button, choose Settings, choose Control Panel, then dou- ble-click the System icon.The System Properties windo w will open. 2. Choose the Hardware tab . 3. Click the Device Manager button. The De vice Manager windo w will open. 4. Click the p[...]

10/100 Network In a Box 59 Linksys EtherFast ® Series 58 Manually Installing the Network Components in Windows 95 & 98 There ma y be times when y ou might need to manually install missing W indo ws netw orking components. 1. Click on Start , Settings , then Control P anel . 2. Double-click the Netw ork icon. The Network windo w appears. 3. Cli[...]

10/100 Network In a Box 61 Linksys EtherFast ® Series 60 N N o o t t e e : : Some PME-sup- porting motherboards may not require the WOL wire to be con- nected. Check your PC’ s documentation for more information. Installing and Configuring W ake-On-LAN Overview Only install the W ake-On-LAN wires if y our motherboard supports remote wak e-up ev [...]

10/100 Network In a Box 63 Linksys EtherFast ® Series 62 Sending a Magic Packet In order to use W OL you need to kno w the MA C address of the card you wish to “wak e”. If you don’ t know the MA C address of the PC y ou are on, turn to page 48 to lear n how to run the EtherF ast Card’ s diagnostic program. 1. T ur n off the PC on which y o[...]

10/100 Network In a Box 65 Linksys EtherFast ® Series 64 No Changes Allowed Y our PC ma y not allo w you to change the IRQ v alue(s) of the PCI slot(s). In this case, you will ONL Y be ab le to use the IRQ and I/O values that ha ve been pre-assigned to each slot. The popular BIOS from Phoenix, for example, does not generall y allo w you to modify [...]

10/100 Network In a Box 67 Linksys EtherFast ® Series 66 • • S S t t r r a a i i g g h h t t - - T T h h r r o o u u g g h h C C a a b b l l i i n n g g • • C C r r o o s s s s - - O O v v e e r r C C a a b b l l i i n n g g Crimping Y our Own Network Cables T wisted-Pair Cabling There are different grades, or categories, of twisted-pair c[...]

10/100 Network In a Box 69 Linksys EtherFast ® Series 68 10/100 LAN Card Specifications Model Numbers: LNE100TX v4 System: PCI 2.1 (or higher) compliant PC Standards: IEEE 802.3, IEEE 802.3u, PCI 2.1 & 2.2, A CPI, PC99 Protocol: CSMA/CD P orts: One Combo RJ-45 10BaseT/100BaseTX Speed: Full Duplex 200Mbps/20Mbps Half Duplex 100Mbps/10Mbps Cabli[...]

10/100 Network In a Box 71 Linksys EtherFast ® Series 70 Customer Support F or help with the installation or operation of your EtherF ast 10/100 Netw ork in a Box, contact Linksys Customer Support at one of the phone numbers or Internet addresses below . Customer Support (800) 326-7114 (949) 261-1288 Information (800) 546-5797 Fa x (949) 261-8868 [...]

© Copyright 2000 Linksys, All Rights Reserved. http://www .linksys.com[...]