Loewe Art 42 S manuale d’uso

Operating instructions – Art 47 SL – Art 42 SL – Art 37 SL – Art 32 SL TV 233–34177.021 Downloaded From TV-Manual.com Manuals[...]

Please fold out this page. Contents Remote control – TV functions ................................................................ 3 Control unit front side of the device ....................................................... 4 Connections rear side of the device Art 32 SL ......................................... 5 Connections rear side of the [...]

3 - Remote contr ol – TV functions (1 Radio only for DVB reception, pr ovided the station broadcasts this. Otherwise switch-over to an audio input. (2 When equipped with Digital Recorder , these buttons have different functions, see Digital Recorder user guide. Switch on / switch off to standby mode ..................................... (page 13)[...]

- 4 DR + Button + : Station up in the menu: to the right  On/Off button: Switch on from the standby mode Switch off from the standby mode Button – : Station down in the menu: to the left  Display : = Standby = Operation = Operation without on-screen display (Radio, EPG data capture or timer recor ding) Button R : Radio on/off (1 (back to TV[...]

5 - ANT OUT (1 Connect antenna output with ANT - TV (tuner 1) A N T-T V Antenna/cable analogue/digital (T uner 1) RS-232C (1 - serial interface AUDIO IN1 L/R - audio input left/right (analogue) AUDIO OUT L/R - audio output left/right (analogue) ANT SA T2 (1 Satellite antenna (Sat tuner 2) ANT2 (1 Antenna/cable analogue/digital (T uner 2) AV 1 Euro-[...]

- 6 Connections r ear side of the device Art 37 SL (1 See page 73 for equipment and upgrade possibilities. Factory setting: A V2: DVD recorder Y ou can change this during the initial installation (page 13) or in the connection wizard (page 46). Before you connect other devices or make any changes, please start the con- nection wizard (page 46) and [...]

7 - Connections r ear side of the device Art 42 SL / Art 47 SL Factory setting: A V2: DVD recorder Y ou can change this during the initial installation (page 13) or in the connection wizard (page 46). Before you connect other devices or make any changes, please start the con- nection wizard (page 46) and the sound components wizard (page 54), and t[...]

- 8 Welcome Thank you! Loewe sets high standards in technology , design and user friendliness. This applies equally for TV , video and accessories. Y our new TV set is equipped for the TV standard "HD TV" (High Definition T elevision). With its high definition screen, the 100 Hz image refr esh frequency and the future-oriented digital int[...]

9 - Welcome Operating convenience with wizar ds This TV set offers user prompting with wizards that take you thr ough the settings step-by-step. Y ou can return to the previous step or exit the wizard at any time. The wizards in overview Initial installation The initial installation wizard helps you with the initial installation and connection of a[...]

- 10 For your own safety and to prevent unnecessary damage to your device, read and comply with the following safety instructions: Proper use and environmental conditions This TV set is intended exclusively for the reception and repr oduction of video and audio signals and designed for the home and office. It may not be used in rooms with high humi[...]

11 - For your safety Energy consumption Y our TV set is equipped with an eco-standby power supply . In the standby mode, the power consumption drops to low power (see T echnical data on page 71). If you want to save even more energy then switch the device off with the mains switch. However note that in this case, EPG (Electronic Programme Guide) da[...]

- 12 Installing the TV set First plan the installation solution for your TV set. See the installation instructions of the enclosed table mount for this. See accessories (page 72) for other installation options. Preparing the r emote control unit Inserting or replacing batteries Press the embossed arrow and push down the battery compartment cover . [...]

13 - T urning the set on/off Switching the TV set to standby mode Activate the mains switch on the bottom of the set. The display in the control panel on the front of the set will be illuminated red, the set is now in standby mode. Switching the TV on/off on the control unit Press the on/off button in the middle for about 2 seconds to switch the TV[...]

- 14 For TV sets with MHEG-5 software the stations ar e tied to “Logical Channel Numbers” – “L CN” and sorted from 1- 799. Digital stations without “LCN” are stor ed from 800 onwards. Analogue stations are stor ed from 1001. Y ou can state whether coded stations are to be searched for in the search/update. Select yes to save all found[...]

15 - Positioning/aligning the DVB- T antenna If you receive one or more D VB- T stations with picture or sound interfer- ence, you should change the position and alignment of the antenna. Ask your dealer to tell you which channels are used to broadcast the D VB- T stations in your region. ➠ In normal TV mode, without other displays. A DVB- T stat[...]

- 16 Oper ating convenience The info display The info display shows a content-based info text for each menu item at the top edge of the screen to aid you in making the settings. In conjunc- tion with the index it makes a convenient control system. ➠ A menu is displayed. The factory setting is that the info display is shown auto- matically for eac[...]

17 - Oper ating convenience The index in the TV set Y ou can start all wizards and many operating functions directly fr om this point. The complete function scope of the TV set can thus be easily understood. Alphabetic sorting is preceded by the items Language , Energy efficiency , Integrated features and Repeat initial installation . Call index ?[...]

- 18 Settings TV menu Picture Sound Connections Recording Recording wizard Timer list Pre-recor d time Post r ecord time New devices/modifications Sound components Antenna DVB Digital Link Plus Miscellaneous Picture adjustment Contrast Colour intensity Colour temperature Brightness Sharpness Digital Noise Control (DNC) more... Image + Active Pictur[...]

19 - Radio menu Sound Stations T imer functions Search wizard Manual adjustment Change stations Select/change favourites Switch off today only Switch off daily One-time reminder Wake up Mon-Fri Wake up Sat Wake up Sun Wake up with Wake up signal volume Switch on TV when marked off on (only for DVB) on (for DVB + analogue) Select provider (1 Station[...]

- 20 Select station With the keys P+ and P - on the remote control P+/P– Station up/down. The station display with sound identification is displayed briefly . ➠ If favourites are selected, the station in the favourites list is switched over with P+/P– (see page 21). ➠ If other languages or DVB subtitles are available on D VB stations, the l[...]

21 - Daily oper ation With the favourites lists Y ou can save and call your favourite stations in 6 favourites lists (e.g. for multiple users). Each favourites list can contain up to 99 stations. After initial installation, 10 stations from the station list are alr eady stored in the first list. Change the favourites list to suit your requirements [...]

- 22 Daily oper ation Adjusting the sound Switching sound on/off Sound off; Sound on: Press button again or set volume V+ . Setting the volume V+/V– V olume louder / quieter . The volume bar will be shown briefly if no other menu is displayed. Call Sound adjustment Call Sound adjustment . Select sound adjustment by pressing several times. or: [...]

23 - Daily oper ation Explanations of the sound settings: Selection possibility Mono/Stereo or Sound 1 or Sound 2 for two-sound broadcasts separately for speakers and headphones. Only available with analogue stations. Reduces volume differences, e.g. for advertisements that are too loud. Sound selection for two sound broadcasts. Determining the max[...]

- 24 Adjusting the picture Call TV menu .   Select Picture ,  go to the menu line below .  Select the desired picture function,  go to the menu line below .  Make changes. Explanations of the picture settings: Switches the picture parameters between personal set- tings and energy efficiency presettings. Adjust co[...]

25 - Daily oper ation Explanations of the picture formats: ➠ The setting options depend on the transmitted picture content. 16:9 Proportionally correct display of 16:9 broadcasts. 4:3 Pr oportionally correct display of 4:3 broadcasts. Panor ama Pr oportionally correct or format filling display (as-delivered state) of 4:3 broadcasts on the 16:9 sc[...]

- 26 Daily oper ation Button functions Every operating mode of the TV set (TV , Radio, T eletext, EPG, PIP , PhotoViewer and DR archive, if equipped with Digital Recorder) has its own menu and own functions for the coloured buttons. The function of the coloured buttons is shown at the bottom of the menus and wizards. Below , some of the function ar[...]

27 - Status display ➠ In normal TV mode, without other displays. END: Show/hide status display . For MHEG-5, INFO button . Y ou will see the number and name of the station and the title of the current broadcast (if available) and the sound identification in the top two lines. The bar (if available) indicates the progress of the curr ent programme[...]

- 28 Managing stations TV stations V arious options for managing stations are available via the TV menu. For example the description for TV stations. For radio stations the same applies, except that the Radio menu is called in Radio mode (see also page 38). ➠ Station management is not possible if a progr ammed timer recording is still pending. ?[...]

29 - Search for/update stations – handling of new and no longer found stations After the automatic search/update has been completed, the number of new found stations is displayed. OK List of newly found stations.  Select station. Y ellow button: Mark / unmark station Blue button: Mark / unmark all OK saves the marked station. Afterwar[...]

- 30 Change, delete, move, rename, restor e station ➠ Change station can also be called via the station list (page 20). ➠ If at least one station is locked the access code must be entered before changing stations start-up (see Par ental lock on page 43). Call TV menu .  Select Settings ,  go to the menu line below .  Select St[...]

31 - Managing stations Put together / change favourites list Each favourites list can contain up to 99 stations. Y ou can put together the favourites lists to suit your requirements (e.g. topic lists). Other persons using this TV set can create their own favourites lists. The favourites lists also have the advantage that the stations of different s[...]

- 32 Picture in Pictur e (PIP) The concurrent display of two different images is r eferred to as Picture in Picture. ➠ The coloured buttons do not work as described below for TV sets with MHEG-5 software, but they operate as described on page 37 (Digital T eletext). ➠ A concurrent display of two HD TV signals is not possible. ➠ A concurrent d[...]

33 - Change position of the PIP small picture ➠ Other than the status line, which may possibly be displayed, no other display is shown on the screen:  Move the PIP into a corner of the screen. The position of the small picture can also be selected under Position in the PIP menu. Switch to iPIP / Standar d PIP function ➠ PIP menu ope[...]

- 34 Adjusting the programme list ➠ The selection is at the top of the specifications, if not, press the blue button .  Select Date , Time , Stations or T opics .  Select defaults within the respective line. Example If you are searching for the next news, select today’ s date, 17:00 for example for the time, all for station an[...]

35 - In the station selection you can determine for which station in the programme guide information is to be displayed. Only stations with  are shown in the EPG. With the coloured buttons you can select or remove sta- tions or only select the stations from the favourites lists. Because of the large number of receivable D VB-S stations you shoul[...]

- 36 Additional page selection possibilities 1st possibility: Call overview page 100 . 2nd possibility: Directly enter the page number . 3rd possibility: ➠ The page includes 3-digit page numbers.  Mark desired page number . OK Call the page. 4th possibility: ➠ The page consists of several sub-pages indicated by the selection option on [...]

37 - Programming timer r ecordings via T eletext ➠ T eletext is started, if not, press the TEXT button . Call the progr amme pages of the current station. Green button: Go to the appropriate page.  Select the desired progr amme, OK to programme the recor ding. Change the appropriate recor ding data in the following menu Timer data (see a[...]

- 38 T eletext Digital teletext (MHEG-5) In the UK or Ireland, the teletext for DVB- T stations is transmitted as per the MHEG-5 standard. It contains text, graphics, functions and links. ➠ Only for TV sets with MHEG-5 software. ➠ At the moment only available in United Kingdom and Ir eland. ➠ Digital teletext is not available when DVB subtitl[...]

39 - Digital r adio Audio adjustment Call Sound adjustment . Other settings as for TV mode (see page 22). Switching the screen on/off Red button: Switch off the screen. The LED display on the TV set (see page 4) changes from green to or ange. Switch on the screen with the r emote control: Press Red button , AUDIO button or OK button (station list i[...]

- 40 If you want to change the update settings:   Select Change update settings , OK the wizard polls the update settings. ➠ The selection options depend on the antenna cables connected at the initial installation (see page 13). USB only New software is searched for via USB. USB and DVB- T New software is searched for first via USB then [...]

41 - DVB If you have adapted the update settings: OK  proceed.   Select Start update , OK  start update procedure.  Select software type: TV base software or DVB software , OK  start search. If a new software version is available after the search, the following screen message appears. Loading new software    S[...]

- 42 DVB Conditional Access module (C A module) In order to be able to receive digital stations, a Conditional A ccess module (CA module) and a Smart Car d must be inserted in the CI slot of your TV set (see pages 5 to 7). The CA module and the Smart Car d are not part of the TV set's scope of delivery . They are usually available from your de[...]

43 - Other settings Par ental lock Y ou can select and set various security options to prevent unauthorised use of the TV set and to protect your children fr om unsuitable programmes. Defining the access code (PIN) Call TV menu .   Select Settings ,  go to the menu line below .   Select Parental lock ,  go to the menu [...]

- 44 Other settings Timer functions This menu offers you convenient alarm services. Programmed alarms ar e also active when the TV set has been switched off to standby . If the TV set switches on from the standby mode by alarm, a screen message appears. If this is not confirmed within 5 minutes with the OK button , the TV switches back off automati[...]

45 - Other settings On-screen displays Y ou can select different settings in this menu which affect the on-screen displays. Call On-screen displays Call TV menu .   Select Settings ,  go to the menu line below .   Select Miscellaneous ,  go to the menu line below .  Select On-screen displays ,  go to the me[...]

- 46 Select the equipment you want to connect or remove equipment you no longer use in the A V equipment selection.   Select equipment/connection. Y ellow button: Connect/disconnect equipment. A Camcorder / camer a is connected to the TV set addition- ally in the following example. OK Proceed . The connection diagram is displayed again.[...]

47 -  Select the signal types of the individual devices one after another where necessary . Normally you should leave the setting on Automatic CVBS/YC (e.g. for DVD player/r ecorder) or Autom.- VHS/SVHS (e.g. VCR), otherwise select the suitable signal type. OK Proceed .  Select yes or no . If playback is started on a device connected to[...]

- 48 Oper ating additional equipment Devices to the connections A V1/A V2/A VS Accessory equipment such as DVD players, video and D VD recorders etc. can be connected to the TV set at the Euro- A V sockets AV 1 and AV 2 (see pages 5 to 7). The A V input AV S (see pages 5 to 7) offers the possibility of connecting a digital camera or a camcorder for[...]

49 - Connecting Camcorder/camera ➠ Camcorder/camer a is registered with the connection wizard. Switch off all equipment before connecting. Connect the A V output of the camcorder to the audio input sockets L/R (white/red) and the S- VHS connection of the A VS sockets of the TV set. Use the A V cable enclosed with the camcorder for this. Some camc[...]

- 50 Oper ating additional equipment Devices to the HDMI (DVI) connections The HDMI connections (High Definition Multimedia Interface) allow the transmission of digital video and audio signals from a player , e.g. DVD player , DVD recorder , Blu-ray player , game console or Set- T op-Box via a single cable. The digital video and audio data are tran[...]

51 - Oper ating additional equipment Concealed installation of HDMI devices Digital Link HD (HDMI CEC) The Digital Link HD (HDMI CEC) system operation allows Loewe television sets to transmit the remote contr ol signals via the HDMI connection of a TV set to compatible HDMI devices, such as e.g. Loewe AudioVision. Y ou can therefore set up a concea[...]

- 52 Oper ating additional equipment Devices to the PC IN connection Y ou can connect a PC to the PC IN socket for example and thus use the TV screen as a monitor . ➠ When connecting a PC or accessory equipment to the PC IN socket of the TV set, set one of the following screen resolutions on the PC / accessory equipment first. 800 x 600 60 Hz (SV[...]

53 - Oper ating additional equipment Devices to the Component IN connection DVD players/recor ders or a Set- T op-Box with Component Video con- nections can also be connected to the Cb/Pb Cr/Pr Y sockets ( SD/HD- COMPONENT ) of the TV set instead of to the EURO-A V sockets. The connecting cable with three cinch plugs each transfers the pictur e inf[...]

- 54 Oper ating additional equipment Sound components wizard The sound components wizard helps you to configure the components used to play the TV sound. The TV speakers alone or with active subwoofer , active speakers, analogue or digital HiFi/A V amplifier or the Loewe Individual Sound Projector can be configured depending on what you want to use[...]

55 - Connecting audio amplifiers The sound component wizard permits configuration of differ ent audio amplifiers (stereo amplifiers, surround amplifiers, analogue or digital) with different digital audio formats (Dolby Digital, dts, MPEG, and stereo/PCM). See the operating manual for the audio amplifier for more information. Call TV menu . ?[...]

- 56 Assignment of the digital audio input In order to be able to hear the digital sound of an external device con- nected to an A V input, an A V input can be assigned to the digital audio input socket AUDIO DIGIT AL IN . When switching to this A V input, the digital audio signal applied to the AUDIO DIGIT AL IN input is passed on to the upgradabl[...]

57 - Oper ating additional equipment The direct way to r ecord Y ou can programme timer recor dings for Digital Recorder or connected recorders available accor ding to the equipment on the TV set. The record- ing wizard is integrated at sever al places for programming a recording. Y ou will find further information about recording with Digital Reco[...]

- 58 Oper ating additional equipment Programming the timer with the timer overview All programmed r ecordings, marked programmes and copy orders (1 ar e listed in the timer overview . Y ou can also programme new recor dings, mark other programmes and copy (1 pr e-recorded pr ogrammes from the DR archive to an external recor der with the timer overv[...]

59 - Oper ating additional equipment Timer r ecording with external devices ➠ It is not possible to record HD TV broadcasts with external devices. Use the internal Digital Recorder for this if it is installed. Recorder with Digital Link Plus If you use an externally connected recorder with Digital Link Plus or a similar system, the TV set and con[...]

- 60 PhotoViewer Y ou can view photos in the standard JPEG format stored on a USB stick or a memory card in a card r eader . Y ou can also collect photos in a slide show . Connecting ➠ Certain USB memory media may not be supported by this set under some circumstances. Plug a card reader (via a USB cable) or a USB stick into the USB port on the TV[...]

61 - Calling the PhotoViewer menu In the PhotoViewer menu you can make picture settings and select the memory medium. ➠ The photo overview is displayed. Call PhotoViewer menu . Explanations of the setting possibilities: Within the folder select a photo directly or go to the beginning or end of the folder . With Optimum size the photo is reduced o[...]

- 62 Oper ating additional equipment MusicBox Y ou can play music files in MP3 or WMA format which are saved on a USB stick or a memory card in a card r eader . Y ou can also collect the music titles in play lists. Connection ➠ Certain USB memory media may not be supported by this device. ➠ Y our memory medium should not exceed a total capacity[...]

63 - Oper ating additional equipment Functions of the control buttons ➠ Title is played. ➠ Fast forwar d and rewind is no possible with WMA files. ST OP button: Once: resume stop, twice: stop. PLA Y button: After resume stop: Continue playing at place where playback was interrupted. After stop: Start playing the first title according to the set[...]

- 64 Oper ating additional equipment MusicBox – Play lists Y ou can save and call your music titles in play lists. Change and create play lists as you like. The play lists are created on the memory medium in the common M3U format for simple exchange with the PC. Call / play play list ➠ The MusicBox list is displayed. Red button: Call Play lists[...]

65 - Oper ating additional equipment Rename play lists ➠ Play list (right column) must be selected. If not, change column with  . Blue button: Starts Rename play list . Numeric buttons: Enter new name (same procedure as for rename station, see page 30). OK Save new name. Move titles in the play lists / change order ➠ Play list (right column)[...]

- 66 Operating L oewe equipment Using the remote control for the TV mode of the TV set Press the TV button , the display above it will light for approx. 5 seconds. Using the remote control for additional equipment Press the REC , DVD or AUDIO button , the display above it will light for approx. 5 seconds. As long as a button is pressed, the display[...]

67 - Functions for the Loewe DVD r ecorder (Centros 1202, 2102 HD, ViewVision DR + ) TV Sound off/on LED indicator for current operating mode Switch over to operate TV set Switch over to operate Recor der Timer recording menu; timer r ecording list menu ST OP: Title List; PLA Y : Edit thumbnail; CARD: Photo-, Music-, Film-Mode ViewVision DR + : Tim[...]

- 68 Oper ating additional equipment Rotating the TV set (upgradable interface) Y our TV set can be upgraded with the connection for a rotating foot control. If the set is assembled with a Loewe stand with motor drive, you can align it to suit your sitting position using the remote control. ➠ A motor unit is connected. ➠ In normal TV mode, with[...]

69 - T r oubleshooting Problem Possible cause Remedy All menus are displayed in the wrong language . The menu language was set incorrectly . Set the menu language: Press the INFO button in TV mode ( Index ). Mark the first key word and call it with OK . Then select the language and confirm it with OK . In the TV menu , Connections cannot be called [...]

- 70 T r oubleshooting Problem Possible cause Remedy Digital Link Plus does not work. a) EURO-A V cable is not fully wired (pin 10 not wired). b) Some recorders can only adopt stations during the initial installation of the TV set. a) Replace the EURO-A V cable. b) Restore the recorder to the as-deliver ed state (see recorder's oper ating manu[...]

71 - T echnical data Jack 3.5 mm: ............................................................ Headphones 32-2000 ohm Mini-DIN (A VS) Video IN: ................................................................ Y/C (S-VHS/Hi 8) ............................................................ CVBS (VHS/8 mm) Cinch (yellow) Video IN: ......................[...]

- 72 Setup possibilities Art 42 SL / Art 47 SL n T able Stand (delivery status) n Floor Stand 4 (1 / 4 MU SP (1 (2 n Floor Stand 5 MU SP (1 (2 n Floor Stand A 37/42/47 n Wall Mount WM 57 n Wall Mount Flex 52 L (1 Art 37 SL n T able Stand (delivery status) n Floor Stand 4 (1 / 4 MU SP (1 (2 n Floor Stand 5 MU SP (1 (2 n[...]

73 - Accessories Upgrade kits Upgrade kit Digital Single Satellite T uner (Art.No. 89565.081): Y ou can receive digital satellite and HD TV stations with the upgrade kit. The tuner is integrated in the TV set and is operated with the r emote control/menu control. The retrofit possibilities for your set can be found in the table on page 74. Upgrade [...]

- 74 TV type Art 32 SL Art 32 SL / DR + Art 37 SL Art 37 SL / DR + Art 42 SL Art 42 SL / DR + Art 47 SL Art 47 SL / DR + Digital Recorder – z – z – z – z Single DVB- T/C z – z – z – z – Dual DVB- T/C – z – z – z – z USB port 1x 2x 1x 2x 1x 2x 1x 2x Single DVB-S2 Art.No. 89565.081 {{{{{{{{ T win DVB-S2 Art.No. 89565.080 – {[...]

75 - Glossary 0-9 24p movie display: Films released on Blu-Ray Disc support presentation of 24p cinema films. The Blu-Ray player transfers the original film format to the television with 24 frames per second. The DMM (DigitalMovieMode) set in the factory calculates and inserts additional intermediate pictures, which suppress film jerking typical fo[...]

- 76 DVI: Digital Visual Interface, is an interface for transmitting digital video and graphic data (without audio). Dynamic contrast ratio: Her e the light intensity of the display is adapted in case of a high black portion in the picture. The so-called backlights are dimmed automatically and the contrast r atio increases temporarily , i.e. dynami[...]

77 - Pixel error: A pixel error is a defective pixel, usually on an L CD. Pixel errors may be caused by production errors. They ar e expressed for example by a constantly lit pixel or a constantly black pixel. Single defective pixels however are excluded from a guar antee. Progressive JPEG: Pr ogressive JPEG s are built up gradually . The quality o[...]

- 78 Y Ycc/Ypp: Colour standards for Set- T op-Boxes . YCbCr: Digital colour model, see COMPONENT IN . YPbPr: Analogue colour model, see COMPONENT IN . Glossary Downloaded From TV-Manual.com Manuals[...]

79 - Index 0-9 24p format 50 A Access code 43 Adjusting the picture 24 Adjusting the sound 22 Alarm 44 Assist + 9, 17 Audio adjustment 22  AUDIO button 13 Auro Loewe Pr eceiver 54 Auto format 24 Automatic dimming 24 Automatic speech detection 23 Automatic time control 57 A V audio signal 23 A[...]

- 80 R Radio menu 19, 39 Radio mode 13, 38 REC button 66 Recording 57 Recording wizard 57 Remote control 3, 12, 66 Repeat initial installation 13 Reset picture/sound 24 Rotating the TV set 68 S Safety 10, 11 Satellite system 14 Scope of delivery 8 Search/update stations 28 Search wizard 28 Select station 20 Service 82 Set balance 23 Settings 18 Sig[...]

81 - Other T rademarks Manufactured under licence from Dolby Labor atories. "Dolby", "Pro Logic" and the double-D symbol are tr ademarks of Dolby Laboratories. The screen font "LoeweL2700" is based on the "T avmjong Bah Arev (tavmjong.free.fr)" font, which in turn is based on "Bitstream V era". Bits[...]

82 Loewe Austria GmbH Parkring 12 1010 Wien, Österreich T el +43 - 1 22 88 633 - 0 Fax +43 - 1 22 88 633 - 90 Email: loewe@loewe.co.at International Dynamics Australasia Pty Ltd. 129 Palmer S treet Richmond 3121, Victoria, Australia T el +61 - 3 - 94 29 08 22 Fax +61 - 3 - 94 29 08 33 Email: mail@international dynamics.com.au Loewe Opta Benelux NV[...]