Magellan RV5365T-LMB manuale d’uso

User Manual Magell an ® Ro a d M a t e ® R V 5 3 6 5 T- L M B[...]

i IMPORTANT SAFETY WARNINGS The Magellan RoadMate receiver is a vehicle-navigation aid designed to assist you in arriving at your selected destinations. When using the Magellan RoadMate receiver, these safety rules must be followed to prevent accidents that can result in injury or death to yourself or others: • Please check the applicable regulat[...]

ii Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for class B digital devices, in accordance with part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses [...]

iii 2. This device must accept any interference, including interference that may cause undesired operation of the device. IMPORTANT NOTE: IC Radiation Exposure Statement: This equipment complies with IC radiation exposure limits established for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF [...]

iv 112-0054-001 A[...]

471 El Camino Real, Santa Clara, CA 95050 Table of Contents Magellan RoadMate Receiver ............................................................. 1 Magellan RoadMate .................................................................................. 2 AV Input .......................................................................................[...]

471 El Camino Real, Santa Clara, CA 95050 Creating a Destination ....................................................................... 14 Creating a Destination to an Address ...................................................... 14 Creating a Destination to an Intersection ................................................ 15 Creating a Destinatio[...]

471 El Camino Real, Santa Clara, CA 95050 Bluetooth ............................................................................................ 27 Pairing your Bluetooth-ready Phone for the First Time ........................... 27 Bluetooth Settings ................................................................................... 27 Calling Hom[...]

471 El Camino Real, Santa Clara, CA 95050 Setting Highway Lane Assist .....................................................................................36 Sound ...................................................................................................... 36 Setting Volume from Settings ...................................................[...]

1 Magellan RoadMate Receiver The Magellan ® RoadMate ® receiver is a vehicle navigation product that utilizes GPS signals from satellites to calculate your precise location and compute navigational information that can be used to guide you to your destination. Knowing its position and movement, it can then overlay this information on detailed map[...]

2 Magellan RoadMate A - Power Switch B - Micro SD slot C - AV Input D - Power Input AV Input The Magellan RoadMate has an AV input that enables the receiver to be connected to the Magellan Backup Camera (sold separately). The AV input can also play audio and video when connected to a camera, DVD player or any device that has an AV output. To connec[...]

3 Fundamentals Powering on the Magellan RoadMate receiver The Power On/Off switch is located on the top of the Magellan RoadMate receiver. Turning the Magellan RoadMate receiver On 1. Press the Power button. 2. After the initial splash screen the Warnings screen is displayed. Read and tap . Turning the Magellan RoadMate receiver Off 1. Press the Po[...]

4 3. Tap Sound . 4. Tap the check box for Button Sounds . Check to have button sounds played, unchecked to turn them off. 5. Tap to save and exit. Brightness Accessing the Brightness Control 1. Access the Main Menu . 2. Tap the Settings icon . 3. Tap Brightness . 4. Tap inside the brightness adjust bar to set the desired brightness. 5. Tap to save [...]

5 Keypad Understanding the keypad while entering an address is an important part of using your Magellan RoadMate receiver. The keypad is the most common method for entering data into the Magellan RoadMate receiver. Keypad Overview Intersection Used to create a route to the intersection of two streets. City Center When selected, provides a way to se[...]

6 Selecting From List When a list of items found in the database are displayed, use the arrows on the right to move the list up and down and tap on the desired item in the list to continue. Selecting QWERTY or ABC Keyboard 1. Access the Main Menu . 2. Tap the Settings icon . 3. Tap Keyboard . 4. Select QWERTY or ABC . Notes on Entering Data If you [...]

7 QuickSpell Another feature the Magellan RoadMate receiver uses to make entering cities and streets easier is a feature known as QuickSpell. In the example to the right, “CE” has been entered for a street name in Chicago, IL. The Magellan RoadMate receiver has predicted that the street name may be Cedar Ave. Also, it has greyed out any letters[...]

8 Installation Instructions Installation of the Magellan RoadMate receiver is simple and easy. The hardest part will be picking the best location. Selecting the Location A few tips on selecting the proper location. • Mount the Magellan RoadMate receiver in a place where it can be easily seen and will not interfere with your view of the road. • [...]

9 Power Switch Slide the power switch to the left turn the receiver on. Slide the power switch to the center position to turn the receiver off. (Slide the power switch to the right to reset. [Power Reset] can sometimes solve any problems encountered while using the receiver.) Security It is recommended that the Magellan RoadMate receiver is not lef[...]

10 Map Screen The most commonly used screen is the Map screen. Whether you are following a route or just traveling around a city, the chances are that the Map screen will be displayed. The Map screen can be displayed in two unique modes: normal and routing. In normal mode, your position is shown on the map along with the time. As you travel, your p[...]

11 (D) Current position and heading. (F) Zoom in and zoom out controls to change the map scale. (G) Access Main Menu. (H) Access the list of nearest Highway Exit POIs (available only when driving on a highway/freeway/interstate). (I) Access volume controls. (J) Access Bluetooth menu. . Accessing the Map Screen 1. On the Main Menu screen, tap the Ba[...]

12 5. Tap the large GO button on the right to return to the Map screen and begin navigating. Note: if the panned position does not match an existing street address (i.e. the destination is not along a road or street that is stored in the map database), the guidance will stop on the road that is closest to your destination. A dashed line to your fin[...]

13 Volume The volume can be adjusted or muted from the Map screen. (The volume can also be adjusted from Settings > Sound.) Changing the Volume from the Map Screen 1. Tap the speaker icon . Additional controls appear. 2. Tap on the Mute button to mute the volume, or tap the '+' or '-' icons to change the volume levels. 3. Tap[...]

14 Creating a Destination Creating a Destination to an Address When creating an address, the first step is to enter the city. The city can be specified by entering the name of the city, entering the ZIP code for the city or by selecting a previously used city. 1. From the Main Menu tap the Address icon. 2. Enter City: You have three ways to do this[...]

15 Creating a Destination to an Intersection When the street number is not known, an intersecting street can pinpoint the location. 1. From the Main Menu, tap the Intersection icon. 2. Enter City: You have three ways to do this: • To select the city from the list of previous cities, tap the button. • To enter a new city: use the keyboard to ent[...]

16 Previous Destinations Routing to a Previous Destination 1. From the Main Menu, tap the Previous icon. 2. Select the destination from the list of previous destinations. 3. A screen appears with the address of the selected location, the estimated time of arrival (ETA), the distance to travel, and the routing method (e.g. Fastest). 4. (optional) Ta[...]

17 Creating a New Entry in Your Address Book by Entering an Address 1. From the Main Menu , tap the Address icon, and enter an address as described in “Entering an Address”. 2. When the screen appears with the address of the selected location, the estimated time of arrival (ETA), the distance to travel, and the routing method (e.g. Fast), tap S[...]

18 OneTouch Menu In addition to Home Address, there are other icons in the OneTouch Menu. There are predefined bookmarks as well as user assignable bookmarks for searches and favorite destinations. They can be used for easy access of frequent destinations and to get local information when needed. Furthermore, you can assign POI search criteria to O[...]

19 Setting a Route to a OneTouch Icon With the OneTouch menu set up you can now go to a saved address or search. 1. Tap the button in the top right corner of the Map screen. 2. Tap one of the assigned OneTouch buttons. 3. If the assigned button is for a search, the list of POIs is displayed. Tap on the desired POI. The “Preview” icon at the bot[...]

20 Points of Interest (POI) The Magellan RoadMate receiver has preloaded POIs that can be used as a destination for a route. Selecting a restaurant or finding a gas station nearby is at your fingertips. Creating a Route to a POI by Category POIs are categorized into unique categories from gas stations to tourist attractions. Most, but not all categ[...]

21 Creating a Route to a POI by Name 1. From the Main Menu , tap the Points of Interest icon. 2. Tap the Search By Name button. 3. Spell the name of the POI to be used as the destination. You don’t need to enter the full name, but the more characters you enter, the easier it will be to find the exact POI you are searching for. Tap . 4. POIs near [...]

22 Home Address Your most frequent destination can be entered and saved in the Magellan RoadMate as the Home Address for quick and easy access when you need to navigate there. This does not need to be your real home address. Choose any address you visit frequently. You can access it at any time with the first button of the OneTouch menu. Saving the[...]

23 Traveling on a Route Map Screen When a route has been calculated, it will be displayed on the Map screen in green with small arrows indicating the direction of travel. The top of the screen displays the name of the street that comes next in your Turn List together with its distance. If you are not in the city in which the next street is, the nam[...]

24 To permanently change the routing method 1. From the Main Menu , tap the Settings icon. 2. Tap Navigation Preferences . 3. Use the Route Method drop-down menu to select the default routing method desired. Special Routing Functions Cancelling a Route 1. From the Map screen, tap Menu . 2. On the Main Menu, tap the cancel route icon. 3. Confirm tha[...]

25 Multi Destination Routes With the Magellan RoadMate you can create routes with more than one destination. Select one destination and create a single route first. Then turn it to a multi destination route by selecting additional destinations. Creating Additional Destinations with Go To Using the search functions of the Magellan RoadMate you can e[...]

26 9. A screen appears with the address of the next destination in the trip, the estimated time of arrival (ETA), the distance to travel, and the routing method (e.g. Fastest). 10. (optional) Tap Options if you want to change the routing method or the vehicle type. 11. Tap the large GO button on the right to return to the Map screen and start navig[...]

27 Bluetooth Please note that not all of the features of the Magellan RoadMate Bluetooth will work with all phones as features of cellular phones vary from manufacturer to manufacturer. Pairing your Bluetooth-ready Phone for the First Time Before you use the Bluetooth function of the Magellan RoadMate receiver you must pair your Bluetooth- ready ph[...]

28 Enabling/Disabling Audible Maneuver Warning 1. Access the Bluetooth Settings screen. 2. Check Audible Maneuver Warning to turn it on; uncheck to turn it off. (When Audible Maneuver Warning is enabled you will hear a beep when a maneuver is needed and you are in the middle of a phone conversation.) Pairing Additional Bluetooth-ready Phone 1. Acce[...]

29 4. All the addresses in your address book are displayed with the phone icon displayed at the right for those addresses with phone number information. 5. Tap the dial icon on the right to begin placing the call. (The dial icon displayed will indicate if it’s a work, home or cell phone number.) 6. The Magellan RoadMate will begin calling the num[...]

30 1. Tap the Volume button. 2. Tap on the volume (top) slider to adjust the volume. 3. Tap on the microphone gain (bottom) slider to adjust the microphone gain.[...]

31 Traffic Glossary RDS: Radio Data System. Infrastructure that broadcasts digital information on the FM band. TMC: Traffic Message Channel, one of the types of information that a Radio Data System can broadcast. Public TMC Service: In some countries, there is at least one TMC service provider that broadcasts Traffic information free of charge. The[...]

32 Vehicle Profile Set your vehicle profile so that when routes are being calculated you will not be routed over roads that your vehicle cannot travel on. Accessing Vehicle Profile 1. From the Map screen tap Menu . 2. Tap the Vehicle Profile icon. 3. You can choose not to use the Vehicle Profile by unchecking the box on the Vehicle Profile screen. [...]

33 Set Hazmat Type 1. Access the Vehicle Profile screen. 2. Tap the Hazmat Type button. 3. Select from available choices (if applicable).[...]

34 Settings With user Settings you can customize the Magellan RoadMate receiver to better suit your personal needs and preferences. Tapping the Back arrow Tap from any of the Setting screens saves your changes. Accessing System Settings 1. From the Main Menu screen, tap the Settings icon . 2. Tap Sound . 3. Sound levels can be set for the navigatio[...]

35 Selecting the Time Zone 1. Access the System Settings menu (above). 2. Tap Time Zone. 3. Check Auto Time Zone or select your time zone from one of the cities in the list. 4. Tap the back arrow . Selecting Units of Measure Auto power is the duration of time that the Magellan RoadMate receiver remains idle before turning off automatically. 1. Acce[...]

36 Setting Highway Lane Assist When Highway Lane Assist is checked, the map will display highway signs as you approach a highway interchange giving you visual indication of which lane you want to be in. 1. From the Main Menu screen, tap the Settings icon. 2. Tap Map. 3. Checking Highway Lane Assist enables this function. Sound Setting Volume from S[...]

37 Keyboard Setting the Keyboard Layout. 1. From the Main Menu screen, tap the Settings icon. 2. Tap Keyboard. 3. Select QWERTY (default) or ABC keyboard layouts. Traffic Enabling Traffic This option is used when you want to turn traffic off. (Traffic information is available only after purchasing and installing the Traffic Link accessory.) 1. From[...]

38 Default System Settings Restoring All Default System Settings It is useful to set a GPS position if you are not receiving satellite information quickly due to travelling over 800 km/500 mi with the Magellan RoadMate receiver turned off. Setting the GPS position will allow the Magellan RoadMate receiver to compute which satellites are available a[...]