Marantz PD5010D manuale d’uso

Model PD5010D User Guide Plasma Monitor R[...]

Precautions Please read this manual carefully before using your Marantz plasma monitor and keep the manual handy for future reference. CA UTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: T O REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. NO USER-SERVICEABLE P ARTS INSIDE. REFER SER VICING T O QUALIFIED SERVICE PERSONNEL. This symbol warns[...]

NO TE: When you connect a computer to this monitor , a ttach the supplied ferrite cores. If you do not do this, this monitor will not comform to mandatory FCC standards. Attaching the ferrite cores: Set the ferrite cores on both ends of the DVI cable (not supplied), and one end of the power cable (supplied). Close the lid tightly until the clamps c[...]

Précautions V euillez lire ce manuel av ec attention a v ant d’utiliser votre moniteur Plasma Monitor Marantz et conserver ce man uel à portée de la main pour une consultation ultérieure. A TTENTION RISQUE D ’ ELECTROCUTION NE P AS OUVRIR MISE EN GARDE : AFIN DE REDUIRE LES RISQUES D’ELECTRO- CUTION, NE P AS DEPOSER LE COUVERCLE, IL N’Y[...]

REMARQUE: Lorsque v ous br anchez un micro-ordinateur sur ce moniteur , fixez les no yaux en ferrites fournis. Si vous ne le fa î tes, le moniteur ne sera pas en conformit é avec les exigences des standards FCC. Fixation des noyaux en ferrite. Installez les noyaux en ferrite sur chaque bout du c â ble DVI (non fourni), ainsi que sur un c ô t é[...]

Who is covered? Y ou m ust hav e proof of purchase to recei ve warranty service. What is covered? 1) W arranty co verage beg ins the day y ou purchase your Plasma T elevision, and continues for a period of one year . 2) Marantz Amer ica will provide in-home warranty repair . 3) Marantz America will incur all labor char g es for repairs during the w[...]

Contents How to Attach Options to the Plasma Monitor .... 1 Introduction ..................................................... 2 Introduction to the Plasma Monitor PD5010D .............. 2 The features you’ll enjoy include: ............................... 2 Contents of the Package ........................................... 2 Options ............[...]

1 Y ou can attach your optional mounts or stand to the plasma monitor in one of the follo wing two ways: * While it is upright. (See Drawing A) * As it is laid down with the screen f ace down (See Drawing B). Lay the protectiv e sheet, w hich was wrapped ar ound the monitor when it was packaged, beneath the screen surface so as not to scratch the s[...]

2 Introduction to the Plasma Monitor PD5010D PD5010D is a seamless blend of cutting-edge visual technology and sophisticated design. At 50-inches, with a 16:9 aspect ratio, the PD5010D certainly makes a big impression. Ho wev er , at a mere 4.2 inches/107 mm thin, the monitor’ s sleek techno-art lines blend in well with your en vironment. Plasma [...]

3 Front View t PO WER/ST ANDBY indicator When the power is on ............................. Lights green. When the power is in the standby mode ... Lights r ed. y Powe r T urns the monitor’ s power on and of f. u Remote sensor window Receives the signals from the remote control unit. Par t Names and Function INPUT SELECT VOLUME POWER/STANDBY PROC[...]

4 Rear View/ T erminal Board A EXT SPEAKER L and R Connect speakers here. B VIDEO1, 2, 3 Connect VCR’ s, D VD’ s or Laser Discs, etc. here. C DVD1 / HD1 Connect D VD’ s, High Definition or Laser Discs, etc. here. D RGB1 Inputs the analog RGB signal of personal computer , etc. E RGB2/ DVD2/ HD2 RGB2: Inputs the analog RGB signal. DVD2/ HD2: Co[...]

5 Remote Control Unit q PO WER ON/OFF Switches Power ON/OFF . (This does not operate when PO WER/ST ANDBY indicator of the main unit is off.) w RGB/PC Press this button to select RGB/PC as the source. → RGB/PC1 → RGB/PC2 → RGB/PC3 RGB/PC can also be selected using the INPUT SELECT button on the monitor . The input switches as follows each tim[...]

6 !3 DISPLA Y Displays the source settings on the screen. !4 OFF TIMER Acti v ates the off timer for the unit. !5 MUL TI Press this button to select a screen mode from among single mode, side by side, and picture in picture. !6 SELECT Press this button to select the active picture in a multi screen mode. !7 A UTO ADJUST Press this button to adjust [...]

7 Operating Range * Use the remote control unit within a distance of about 7 m/ 23ft. from the front of the monitor’ s remote control sensor and at a horizontal angle of within 30°. * The remote control operation may not function if the monitor’ s remote control sensor is exposed to direct sunlight or strong artificial light, or if there is an[...]

8 Installation RGB 3 (Digital RGB) RGB 1 R/CR/PR G/Y B/CB/PB HD VD L(MONO) R L(MONO) Y CB/PB CR/PR R L(MONO) AUDIO 3 AUDIO 2 DVD1/HD1 AUDIO 1 RGB2/ DVD2/ HD2 R REMOTE CONTROL EXTERNAL CONTROL CONTROL LOCK ON /OFF VIDEO 1 VIDEO 2 VIDEO 3 VCR or Laser Disc Player Document Camera DVD Player IBM VGA or Compatibles P ersonal computer with a digital RGB [...]

9 Connecting Y our PC or Macintosh Computer Connecting your PC or Macintosh computer to your plasma monitor will enable you to display your computer’ s screen image for an impressiv e presentation. The plasma monitor supports the signals described on page 47. T o connect a PC, Macintosh or compatible graphics adapter , simply: 1. Turn of f the po[...]

10 External Speaker Connections External speakers may be connected to the plasma monitor to reproduce sound from VIDEO, D VD or RGB signal sources. External speakers may be connected directly to the SPEAKERS terminals or indirectly by connecting a stereo system amplifier to the audio outputs. CAUTION: Unplug the plasma monitor and all connected com[...]

11 Pin Assignments and Signal Levels for 15 pin RGB (Analog) Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 5 4 3 2 1 15 14 13 12 11 10 9 8 7 6 RGB 3 1 9 17 2 10 18 3 11 19 4 12 20 5 13 21 6 14 22 7 15 23 8 25 26 27 28 16 24 29 Signal (Analog) Red Green or sync-on-green Blue No connection Ground Red ground Green ground Blue ground No connection Sync s[...]

12 POWER T o turn the unit ON and OFF: 1. Plug the power cord into an acti ve A C power outlet. 2. Press the POWER ON b utton (on the remote control unit) to turn on the unit. The monitor’ s PO WER/ST ANDBY indicator will light up (green) when the unit is on. 3. Press the POWER OFF b utton (on the remote control unit or the unit) to turn of f the[...]

13 OFF TIMER T o set the off timer: The off timer can be set to turn the po w er off after 30, 60, 90 or 120 minutes. 1. Press the OFF TIMER b utton to start the timer at 30 minutes. 2. Press the OFF TIMER button to the desired time. 3. The timer starts when the menu turns off. → 30 → 60 → 90 → 120 → 0 OFF TIMER30 T o chec k the remaining[...]

14 W atching with a wide screen (manual) W ith this function, you can select one of four screen siz es. When watching videos or digital video discs 1. Press the WIDE b utton on the remote control unit. 2. W ithin 3 seconds ... Press the WIDE button again. The screen size switches as follows: → ZOOM → NORMAL → FULL → ST ADIUM ZOOM size scree[...]

15 W atching computer images with a wide screen Switch to the wide screen mode to expand the 4 : 3 image to fill the entire screen. 1. Press the WIDE b utton on the remote control unit. 2. W ithin 3 seconds ... Press the WIDE b utton again. The screen size switches as follows: → NORMAL → FULL NORMAL size screen (4:3 or SXGA 5:4) The picture has[...]

16 Showing a couple of pictures on the screen at the same time * An RGB-input picture may not be displayed in these modes, depending on the input signal specifications. 1. Press the MUL TI button to select a screen mode from among single mode, side by side, and picture in picture. Side by side 1 VIDEO1 RGB/PC1 AB Press the cursor buttons   on[...]

17 Menu Operations The OSM window is displayed with respect to the screen as shown on the diagram. * Depending on the screen’ s mode, the OSM may be displayed slightly differently . In the explanation, the OSM section is shown close up. MAIN MENU PICTURE SOUND SCREEN FUNCTION OPTIONS INFORMATION SEL. OK EXIT EXIT PROCEED The following describes h[...]

18 Main menu Sub menu Functions Default Reset PICTURE CONTRAST Adjusts the contrast. Center Y es BRIGHTNESS Adjusts the brightness. Center Y es SHARPNESS Adjusts the sharpness. Center Y es COLOR Adjusts the color . Center Y es TINT Adjusts the tint. Center Y es PICTURE MODE Sets the picture mode according to the VIDEO environment and MEMORY Y es im[...]

19 Picture Settings Menu Adjusting the picture The contrast, brightness, sharpness, color and tint can be adjusted as desired. Example: Adjusting the contrast Pr ess the PROCEED b utton on the remote contr ol unit to display the MAIN MENU on the scr een, then... 1. Use the ▲ and ▼ buttons to select “PICTURE”, then press the PR OCEED button.[...]

20 Setting the picture mode accor ding to the brightness of the room There are four picture modes that can be used ef fectiv ely according to the en vironment in which you are viewing the display . Example: Setting the “THEA TER” mode Pr ess the PR OCEED button on the r emote contr ol unit to display the MAIN MENU on the scr een, then... 1. Use[...]

21 Setting the color temperature Use this procedure to set color tone produced by the plasma display . Example: Setting “1” Pr ess the PROCEED b utton on the remote contr ol unit to display the MAIN MENU on the scr een, then... 1. Use the ▲ and ▼ buttons to select “PICTURE”, then press the PROCEED button. The “PICTURE” screen appear[...]

22 Adjusting the color to the desired quality Use this procedure to adjust the white balance for bright pictures and dark pictures to achieve the desired color quality . Example: Adjusting the “WHITE BALANCE” Pr ess the PROCEED b utton on the remote contr ol unit to display the MAIN MENU on the scr een, then... 1. Use the ▲ and ▼ buttons to[...]

23 Reducing noise in the picture Use these settings if the picture has noise due to poor reception or when playing video tapes on which the picture quality is poor . Example: Setting “NR-3” Pr ess the PROCEED b utton on the remote contr ol unit to display the MAIN MENU on the scr een, then... 1. Use the ▲ and ▼ buttons to select “PICTURE?[...]

24 Sound Settings Menu Adjusting the treble, bass and left/right balance The treble, bass and left/right balance can be adjusted to suit your tastes. Example: Adjusting the bass Pr ess the PROCEED b utton on the remote contr ol unit to display the MAIN MENU on the scr een, then... 1. Use the ▲ and ▼ buttons to select “SOUND”, then press the[...]

25 3. Adjust using the 䊴 and 䊳 buttons. V–POSITION * If neither the 䊴 or 䊳 button is pressed within 5 seconds, the current setting is set and the pre vious scr een reappears. T o continue making other computer image adjustments ... Repeat from step 2. 4. Once all adjustments ar e completed ... Press the EXIT button to return to the main m[...]

26 Information 䡵 Adjusting the A uto Picture ON ................... The Picture ADJ and Fine Picture adjustments are made automatically . OFF ................. The Picture ADJ and Fine Picture adjustments are made manually . 䡵 Adjusting the position of the image V -POSITION ... Adjusts the vertical position of the image. H-POSITION ... Adjusts [...]

27 Adjusting the position of the menu displa y Use these operations to adjust the position of the menus that appear on the screen. Example: Adjusting the position of the menu display Pr ess the PROCEED b utton on the remote contr ol unit to display the MAIN MENU on the scr een, then... 1. Use the ▲ and ▼ buttons to select “FUNCTION”, then p[...]

28 Setting the power management for computer images This energy-sa ving (power management) function automatically reduces the monitor’ s power consumption if no operation is performed for a certain amount of time. Example: T urning the power management function on Pr ess the PROCEED b utton on the remote contr ol unit to display the MAIN MENU on [...]

29 PO WER/ST ANDBY indicator Power management mode On Standby Suspend Of f POWER/ST ANDBY indicator Green Orange Red Red Description H orizontal and vertical synchronizing signals are present from the computer . No horizontal synchronizing signals are sent from the computer . No vertical synchronizing signals are sent from the computer . No horizon[...]

30 Setting the gray level for the sides of the screen Use this procedure to set the gray level for the parts on the screen on which nothing is displayed when the screen is set to the 4:3 size. Example: Adjusting the “GRA Y LEVEL” Pr ess the PROCEED b utton on the remote contr ol unit to display the MAIN MENU on the scr een, then... 1. Use the ?[...]

31 Setting RGB3 ADJ. When the picture input from the RGB3 input terminal is distorted, select the most appropriate setting from among “1”, “2”, and “3”. Example: Setting “2” Pr ess the PROCEED b utton on the remote contr ol unit to display MAIN MENU on the scr een, then... 1. Use the ▲ and ▼ buttons to select “FUNCTION”, the[...]

32 Information 䡵 PLE AU TO .............. The brightness of the screen is adjusted automatically to suit the picture quality . LOCK .............. The brightness level is set to minimum. 䡵 ORBITER ON ................... The picture moves around the screen intermittently . OFF ................. Orbiter mode does not function. 䡵 INVERSE ON ....[...]

33 Option Settings Menu Setting the allocation of the audio connectors Setting the A UDIO 1, 2, and 3 connectors to the desired input. Example: Setting “AUDIO 1” to “VIDEO 2” Pr ess the PROCEED b utton on the remote contr ol unit to display the MAIN MENU on the scr een, then... 1. Use the ▲ and ▼ buttons to select “OPTION”, then pre[...]

34 Information 䡵 BNC SELECT RGB ................ Uses the 5BNC terminal for RGB input. COMP . ............. Use the 3BNC terminal for component input. 䡵 Restoring the factory default settings Select “RESET” under the function menu. Note that this also restores other settings to the factory defaults. Setting a computer image to the correct R[...]

35 Information 䡵 RGB SELECT modes One of these 6 modes must be selected in order to display the following signals correctly . AU TO .............. Select the suitable mode for the specifications of input signals as listed in the table “Computer input signals supported by this system” on page 47. STILL .............. T o display VESA standard [...]

36 Setting the picture size for RGB input signals Use this procedure to switch the setting to “ON” or “OFF”. Example: Setting the “ON” mode to “OFF” Pr ess the PROCEED b utton on the remote contr ol unit to display the MAIN MENU on the scr een, then... 1. Use the ▲ and ▼ buttons to select “OPTION”, then press the PROCEED but[...]

37 Setting the language for the menus The menu display can be set to one of seven languages: Japanese, English, German, French, Swedish, Italian or Spanish. Example: Setting the menu display to “DEUTSCH” Pr ess the PROCEED b utton on the remote contr ol unit to display the MAIN MENU on the scr een, then... 1. Use the ▲ and ▼ buttons to sele[...]

38 4. Once the setting is completed ... Press the EXIT button to return to the main menu. T o delete the main men u, press the EXIT b utton once more. The color system is set to “3.58 NTSC”. Information 䡵 Video signal f ormats Different countries use dif ferent formats for video signals. Set to the format used in your current country . AUTO1/[...]

39 External Control Application These specifications co v er the communications control of the plasma monitor by external equipment. Connections Connections are made as described below . plasma monitor External equipment e.g., P ersonal computer 1) Connector on the plasma monitor side: EXTERN AL CONTR OL connector . T ype of connector: D-Sub 9-pin [...]

40 Communication Format Command 1 Unit ID 1 Unit ID 2 Command 2 Data length Data Check sum 8 bit 8 bit 8 bit 8 bit 8 bit 8 bit 8 bit 8 bit Command 1 Command 1, along with command 2, is a number used to distinguish each command. In the case of ACK, when the lo wer order 4 bits is FH (as in 3FH and 7FH), this indicates that the commands and data of t[...]

41 Command Reference List CMD1 CMD2 LEN 01. Power ON 9FH 4EH 00H 02. Power OFF 9FH 4FH 00H 03. Input Switch Change DFH 47H 01H 04. VOLUME Gain Data DFH 7FH 03H 05. SCREEN MODE Select DFH 51H 01H 06. AUDIO Mute On 9FH 3EH 00H 07. AUDIO Mute Off 9FH 3FH 00H 08. OSM Select DFH 58H 01H 09. Color Gain Data DFH 7FH 03H 10. TINT Gain Data DFH 7FH 03H 11. [...]

42 Operation 06. A UDIO Mute On Function The external control equipment switches on AUDIO Mute of the plasma monitor . T ransmission Data 9FH 80H 60H 3EH 00H CKS ACK 3FH 60H 80H 3EH 00H CKS 07. A UDIO Mute Off Function The external control equipment switches off AUDIO Mute of the plasma monitor . T ransmission Data 9FH 80H 60H 3FH 00H CKS ACK 3FH 6[...]

43 11. SHARPNESS Gain Data Function The external control equipment changes the SHARPNESS gain data of the plasma monitor . T ransmission Data DFH 80H 60H 7FH 03H DA TA00 DA T A01 DA T A02 CKS DA T A00: USER PICTURE Gain Flag 01H DA T A01: SHARPNESS Gain Flag 06H DA T A02: SHARPNESS Gain F0H: -16 FFH: -01 00H: 0 01H: +01 10H:+16 ACK 7FH 60H 80H 7FH [...]

44 17. RED Gain Data Function The external control equipment changes the RED Gain Data of the plasma monitor . T ransmission Data DFH 80H 60H 7FH 04H DA T A00 to DA T A03 CKS DA T A00: USER PICTURE Gain Flag 01H DA T A01: RED Gain Flag 01H DA T A02: RED Gain 1 (Bias) D8H: -40 FFH: -1 00H: 0 IEH: +30 DA T A03: RED Gain 2 (Drive) D8H: -40 FFH: -1 00H[...]

45 20. VIDEO ADJ Request Function The display returns the video adjustments information by the external control equipment ’ s request. T ransmission Data 1FH 80H 60H 45H 00H CKS ACK 7FH 60H 80H 45H 0CH DA T A00 to DA T A0B CKS DA T A00: RED Gain(Bias) D8H: -40 FFH: -1 00H: 0 IEH: +30 DA T A01: GREEN Gain(Bias) D8H: -40 FFH: -1 00H: 0 IEH: +30 DA [...]

46 21. Audio Select Set Function The external control equipment sets combinations of audio and video inputs for the plasma monitor . T ransmission Data DFH 80H 60H 70H 02H DA T A00 DA T A01 CKS DA T A00: AUDIO INPUT 01H: AUDIO 1 02H: AUDIO 2 03H: AUDIO 3 DA T A01: VISUAL INPUT 01H: Video 1 02H: Video 2 03H: Video 3 05H: HD (HD1 or DTV or DTV1) 06H:[...]

47 Screen mode T able of Signals Suppor ted Suppor ted resolution • W hen the screen mode is NORMAL, each signal is con verted to a 1024 dots ⳯ 768 lines signal. (Except f or * 2, 3, 4 ) • W hen the screen mode is TR UE, the picture is displayed in the original resolution. • W hen the screen mode is FULL, each signal is con verted to a 1364[...]

48 *1 Only when using a graphic accelerator board that is capable of displaying 852 ⳯ 480. *2 This signal is converted to a 1228 dots ⳯ 768 lines signal. *3 The picture is displayed in the original resolution. *4 The aspect ratio is 5:4. This signal is con verted to a 960 dot ⳯ 768 line signal. *5 Normall y the RGB select mode suite for the i[...]

49 Symptom Picture is disturbed. Sound is noisy . Remote control unit operates erroneously . The remote control unit does not work. Monitor ’ s power does not turn on when the remote control unit’s power button is pressed. Monitor does not operate when the remote control unit’s buttons are pressed. No sound or picture is produced. Picture app[...]

50 Specifications Product Name SLIM SERIES PLASMA MONITOR Product Code PD5010D Screen Size 43.5"(H) ⳯ 24.5"(V) inches 1106(H) ⳯ 622(V) mm diagonal 50" Aspect Ratio 16 : 9 Resolution 1365(H) ⳯ 768(V) pixels Pixel Pitch 0.032"(H) ⳯ 0.032"(V) inches 0.81(H) ⳯ 0.81(V) mm Color Reproduction 256 le v els, 16,770,000 col[...]

Printed in Japan 00/12 MITdy 334W851210 COUNTRY COMPANY ADDRESS ALGERIE Azur 2000 8, Lotissement Ben Hatadi, Alger, Algerie ARMENIA NGYIG Ltd. 47 A/75 St. Lalaiants, 375000 Yerevan, Armenia AUSTRALIA Jamo Australia Pty. Ltd., 24 Lionel Road, Mt. Waverley, VIC 3149, Australia AUSTRIA Huber & Prohaska GmbH Taborstra ß e 95 / Ladestra ß e 1, Geb[...]