Marantz SR4600 manuale d’uso

Model SR4600 User Guide AV Surround Receiver SR4600U DFU_00_cover 05.5.20, 5:38 PM Page 9 Adobe PageMaker 6.5J/PPC[...]

CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous vol[...]

12. Grounding or Polarization – This product may be equipped with a polarized alternating- current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still f[...]

ENGLISH 1 TABLE OF CONTENTS INTRODUCTION .................................. 1 PRECA UTIONS ................................... 1 A NO TE ABOUT RECYCLING ............ 1 DESCRIPTION ..................................... 2 FEA TURES .......................................... 3 A CCESSORIES ................................... 3 FRONT P ANEL ...........[...]

ENGLISH 2 DESCRIPTION DTS was introduced in 1994 to provide 5.1 channels of discrete digital audio into home theater systems. DTS brings you premium quality discrete multichannel digital sound to both movies and music. DTS is a multichannel sound system designed to create full range digital sound reproduction. The no compromise DTS digital process [...]

ENGLISH 3 FEATURES The SR4600 incorporates the latest generation of digital surround sound decoding technology such as Dolby Digital EX, Dolby Digital, DTS ES (Discrete 6.1 and Matrix 6.1), DTS Neo:6 (Cinema, Music), Dolby Pro-Logic II x (Movie, Music and Game), Circle Surround II (Cinema and Music). In addition, Marantz has focused on the future. [...]

ENGLISH 4 FRONT PANEL t INFRARED receiving sensor window This window receives infrared signals for the remote control. y SURROUND MODE button You can select the surround mode by pressing this button. u PURE DIRECT button When this button is pressed, the tone control circuitry is bypassed as well as Bass Management. DIRECT indicator will be illumina[...]

ENGLISH 5 DISP AU T O TUNED ST V – OFF NIGHT PEAK ANALOG DIGIT AL AT T SLEEP SURR AU TO DIRECT DISC 6.1 MT X 6. 1 EQ DIGITAL SURROUND PC M L C R SL S SR LFE SPKR B ¡7 ¡6 f s a ¡5 ¡8 g jl ¡1 ¡3 d h ¡0 ¡2 ¡4 k FL DISPLAY a DISP (Display Off) indicator This indicator is illuminated when the SR4600 is in the display off condition. s SLEEP ti[...]

ENGLISH 6 n DIGITAL INPUT (Dig.1 - 4) / OUTPUT (coaxial, optical) These are the digital audio inputs and outputs. There are 2 digital inputs with coaxial jacks, 2 with optical jacks. The inputs accept digital audio signals from a compact disc, LD, DVD, or other digital source component. For digital output, there is 1 coaxial output and 1 optical ou[...]

ENGLISH 7 m Cursor ( , , , ) / OK buttons (when AMP mode is selected) Use these button when operating the SETUP MAIN MENU. , MENU OFF button (when AMP mode is selected) This button is used to exit from the SETUP MAIN MENU. . Numeric buttons 1 to 9 / Surround mode buttons Numeric buttons These buttons are used to enter figures in the selec- tion of [...]

ENGLISH 8 RESETTING THE ALL CODE 1. Press and hold down the any Function Selector button and press SETUP button until the indicator blinking twice. 2. Press the code 9 - 8 - 1 . The indicator will blink twice. Then, RC5500SR will return to the factory preset code. Note: • After this procedure, the selected function button is set initial code and [...]

ENGLISH 9 OPERATION OF REMOTE CONTROL UNIT REMOTE CONTROL The distance between the transmitter of the remote control and the IR SENSOR of the SR4600 should be less than 5 meters. If the remote control is pointed in a direction other than the IR SENSOR or if there is an obstacle between them, use of the remote control may not be possible. Remote-con[...]

ENGLISH 10 CH.SEL LIP.SYNC PTY SUB-T/ATT AUDIO INPUT/DISC+ F.DIRECT RDS TUNE/SEARCH T-MODE TREBLE CHANNEL/SKIP BASS A/D P.SCAN/V-OFF 7.1CH IN STEREO MCH-ST MEMO CLEAR DISPLAY NIGHT CSII EX/ES VIRTUAL DTS PURE DIRECT AUTO 3 2 1 6 5 4 9 8 0 7 T.TONE MENU OFF SET UP/ MENU OSD VOL. TV VOL. MAIN SLEEP MUTE AMP TUNER CD TAPE CDR/MD DVD POWER VCR1 DSS/VCR[...]

ENGLISH 11 CONNECTIONS SPEAKER PLACEMENT The ideal surround speaker system for this unit is 7- speaker systems, using front left and right speakers, a center speaker, surround left and right speakers, surround back left and right speakers, and a subwoofer. For best results we recommend that all front speakers be of the same type, with identical or [...]

ENGLISH 12 Caution: • Be sure to use speakers with the specified impedance as shown on the rear panel of this unit. • To prevent damage to circuitry, do not let the bare speaker wires touch each other and do not let them touch any metal part of this unit. • Do not touch the speaker terminals when the power is on. It may cause you to receive a[...]

ENGLISH 13 IN MONITOR VCR1 RS R C SW SBR SL SBL L R SPEAKER SYSTEMS MINIMUM 6 OHMS CENTER R FRONT SURROUND BACK SURROUND LL L R DVD OUT IN MONITOR TV DVD VCR1 OUT IN DSS / VCR2 OUT VIDEO IN OPT. OUT 2 1 7.1CH INPUT L SL C SBL SBR SW SR R TV DVD VCR1 OUT IN IN OUT DSS / VCR2 IN OUT CDR/MD TAPE PRE OUT OUT IN CD R L FM ( 75 Ω ) GND AM AUDIO ANTENNA[...]

ENGLISH 14 MONITOR VCR1 RS R C SW SBR SL SBL L R SPEAKER SYSTEMS MINIMUM 6 OHMS CENTER R FRONT SURROUND BACK SURROUND LL L R DVD OUT IN MONITOR TV DVD VCR1 OUT IN DSS / VCR2 OUT VIDEO IN 1 7.1CH INPUT L SL C SBL SBR SW SR R TV DVD VCR1 OUT IN IN OUT DSS / VCR2 IN OUT CDR/MD TAPE PRE OUT OUT IN CD R L FM ( 75 Ω ) GND AM AUDIO ANTENNA AUDIO S V S. [...]

ENGLISH 15 CONNECTING THE ANTENNA TERMINALS IN OUT MONITOR VCR1 MONITOR RS R C SW SBR SL SBL L R SPEAKER SYSTEMS MINIMUM 6 OHMS CENTER R FRONT SURROUND BACK SURROUND LL L R DVD OUT IN MONITOR TV DVD VCR1 OUT IN DSS / VCR2 OUT VIDEO IN Y DSS / VCR 2 DVD COAX. OUT 4 3 OPT. OUT 2 1 7.1CH INPUT L SL C SBL SBR SW SR R TV DVD VCR1 OUT IN IN OUT DSS / VCR[...]

ENGLISH 16 1. INPUT SIMPLE SETUP 2. SPEAKER 3. PREFERENCE 5. DOLBY PL II 6. CS II 4. SURROUND CD TAPE CD-R TV DVD VCR1 DSS SUBW L&R CENT SL&SR SB SB SIZE LPF/HPF BASS (Subwoofer) (Front Left & Right) (Center) (Surround Left & Right) (Surround Back) (Surround Back Size) (Low/High Pass Filter) (Bass Mix) → SMALL → LARGE → → 80[...]

17 ENGLISH 1. INPUT SETUP (ASSIGNABLE DIGITAL INPUT) Four digital inputs can be assigned as the desired source. Use this menu to select the digital input jack to be assigned to the input source. The Input Setup consists of 6 items, which are as below. • D1AUTO to D4AUTO : Digital AUTO mode If the input signal from the selected source is digital s[...]

ENGLISH 18 5. If you finish these setup, press the or cursor button to select “ TO MAIN MENU ” then press the ENTER button to return the SETUP MENU. Or press the or cursor button to select “ EXIT ” then press the ENTER button to exit the SETUP MENU. Notes: • When a DTS-LD or DTS-CD is playing, this setup is not available. This is to avoid[...]

19 ENGLISH 2-2. SPEAKERS DISTANCE Use this parameter to specify the distance of each speaker ’ s position from the listening position. The delay time is automatically calculated according to these distances. Begin by determining the ideal or most commonly used seating position in the room. This is important for the timing of the acoustics to crea[...]

ENGLISH 20 1. When you select “ MANUAL ” in T-MODE menu by pressing the or button, this unit will emit a pink noise from the front left speaker. At this time, adjust the desired level of the master volume. Remember the level of this noise and then press the button. This unit will emit the pink noise from the center speaker. 2. Using the and cur[...]

21 ENGLISH HT-EQ : Select to active the HT-EQ with the or cursor buttons. The tonal balance of a film soundtrack will be excessively bright and harsh when played back over audio equipment in the home. This is because film soundtracks were designed to be played back in large movie theater environments. Activating the HT-EQ feature when watching a fi[...]

ENGLISH 22 TRUBASS SRS DIALOG EXIT TO MAIN MENU exit SETUP MENU 0 6 0 6 MENU STRUCTURE of CS II setup 6.CS II setup 6. CS II (CIRCLE SURROUND II ) 1. Select “6. CS II ” in SETUP MENU with or cursor button. 2. Press the ENTER button to enter this menu. 3. Press or cursor button to select desired item. 4. Press or cursor button to set the level. [...]

23 ENGLISH USING THE SLEEP TIMER To program the SR4600 for automatic standby, press the SLEEP button on the remote. Each press of the button will increase the time before shut down in the following sequence. The sleep time will be shown for a few seconds in the display on the front panel, and it will count down until the time has elapsed. When the [...]

ENGLISH 24 SURROUND MODE The SR4600 is equipped with many surround modes. These are provided to reproduce a variety of surround sound effects, according to the content of the source to be played. The available surround modes may be restricted depending on the input signal and speaker setup. AUTO When this mode is selected, the receiver determines w[...]

25 ENGLISH VIRTUAL This mode creates a virtualized surround sound experience from a two-speaker (front L and R) playback system playing any multichannel audio source (such as found on DVDs and digital broadcasts), including Dolby Digital, Dolby Pro Logic or DTS. STEREO This mode bypasses all surround processing. In stereo program sources, the left [...]

ENGLISH 26 The relation between the selected surround mode and the input signal The surround mode is selected with the surround mode selector on SR4600 or the remote control unit. However, the sound you hear is subject to the relationship between the selected surround mode and input signal. That relationship is as follows; Notes: • Dolby Digital [...]

27 ENGLISH DISPLAY MODE You can select the display mode for the front display of the SR4600. To select this mode, press the DISPLAY on the front panel or on the remote. When this button is pressed, the display mode is switched in the following sequence. → Surround Mode → Auto-display Off → Display Off → Input Function → Surround Mode.... [...]

ENGLISH 28 7.1 CH INPUT The SR4600 is equipped for future expansion through the use of Multi channel SACD multichannel player or DVD-Audio player. When this is selected, the input signals connected to the L(front left), R (front right), CENTER, SL (surround left), SR (surround right) and SBL (surround back left) and SBR (surround back right) channe[...]

29 ENGLISH 7.1 CH INPUT LEVEL This menu is to adjust the speaker levels for 7.1- channel input sources. Here you will adjust the volume for each channel so that they are all heard by the listener at the same level. 1. Press the CH.SEL button on the remote to enter this menu. 2. Press or cursor button to select desired channel. 3. Using the or curso[...]

ENGLISH 30 BASIC OPERATION (TUNER) LISTENING TO THE TUNER Frequency scan step for AM is selectable. Default setup is 10 kHz step, if your country ’s standard is 9 kHz step, Press TUNER button on the remote more than 6 seconds. Scan step will change. Note: • Preset memory for the tuner will clear by changing this setup. AUTO TUNING (Using the SR[...]

31 ENGLISH (Using the remote control unit) 1. Tune into the radio station you desire (Refer to the “ MANUAL TUNING ” or “ AUTO TUNING ” section). 2. Press the MEMO button on the remote. “ – – “ (preset number) starts blinking on the display. 3. Enter the desired preset number by pressing the numeric buttons. Note: • When entering [...]

ENGLISH 32 SURROUND SPEAKER B SYSTEM The Surround Speaker B system is a function which allows you to listen to the same source in a room other than the room in which the SR4600 is located. The operations possible with the Surround speaker function are explained briefly below. ANOTHER ROOM PLAYBACK USING THE S(SURROUND) SPEAKER B TERMINALS The SR460[...]

33 ENGLISH TROUBLESHOOTING In case of trouble, check the following before calling for service: 1. Are the connections made properly ? 2. Are you operating the unit properly following the user ’ s guide ? 3. Are the power amplifiers and speaker working properly ? If the unit does not operate properly, check items shown in the following table. If y[...]

ENGLISH 34 TECHNICAL SPECI- FICATIONS FM TUNER SECTION Frequency Range ................................ 87.5 - 108.0 MHz Usable Sensitivity ............................ IHF 1.8 µ V/16.4 dBf Signal to Noise Ratio ................... Mono/Stereo 75/70 dB Distortion .................................... Mono/Stereo 0.2/0.3 % Stereo Separation ........[...]

SETUP CODES CD Aiwa ...................................................... 0184 Burmester .............................................. 0447 California Audio Labs ............................ 0056 Carver ......................................... 0184, 0206 Classic ................................................... 0324 Denon .....................[...]

Crown .................................................... 0207 Curtis Mathes ......... 0074, 0081, 0181, 0478, 0120, 0087, 0729, 0057, 0172, 0193, 1174, 1374 CXC ....................................................... 0207 Daewoo ................... 0478, 1688, 0119, 0699 Denon .................................................... 0172 Dumont .....[...]

Pioneer ........................................ 0094, 0085 Polk Audio ............................................. 0108 Profitronic .............................................. 0267 Proscan ....................................... 0087, 1087 Pulsar .................................................... 0066 Quasar .............................. 00[...]

05/2005 00M42BW851250 mzh-e Printed in China is a registered trademark. www.marantz.com You can find your nearest authorized distributor or dealer on our website. U.S.A. Marantz America, Inc. 1100 Maplewood Drive, Itasca, IL 60143, U.S.A. EUROPE Marantz Europe B.V. P.O. Box 8744, 5605 LS Eindhoven, The Netherlands Manufactured under license from Do[...]