Maxtor STM31000334AS manuale d’uso

Product Manual DiamondMax 22 Serial A T A 100544218 Rev . A November 2008 STM31000334AS STM3320614AS STM3160813AS[...]

Revision history Copyright © 2008 Seagate T echnology LLC. All right s reserved. Printed in U.S.A. Publication number: 1005 44218, Rev . A November 2008 Seagate, Seagate T echnology and the W ave logo ar e registere d trademarks of Seagate T echnology LLC in the United S tates and/or other countries. DiamondMax , MaxBlast, Maxtor and th e Maxtor l[...]

DiamondMax 22 Serial ATA Product Manual, Re v. A i Contents 1.0 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.1 About the Serial ATA interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 2.0 Driv[...]

ii DiamondMax 2 2 Serial ATA Product M anual, Rev. A[...]

DiamondMax 22 Serial ATA Product Manual, Re v. A iii List of Figures Figure 1. Typical 5V startup and operation current profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 Figure 2. Typical 12V startup and operation current profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [...]

[...]

DiamondMax 22 Serial ATA Product Manual, Re v. A 1 1.0 Introduction This manual describes the functiona l, mechanical an d interface specifications for the following Seagate DiamondMax ® 22 Serial A T A model drives: These drives provide the following key fea tures: • 7,200 RPM spindl e speed. • High instant aneous (burst) da ta-tr ansfer rate[...]

2 DiamondMax 22 Serial ATA Produc t Manual, Rev. A 1.1 About the Serial A T A interface The Serial A T A interface pr ovides several advant ages over the traditional (p arallel) A T A interface. The primary advantages include : • Easy installation and configuration with true plug-and-pla y connectivity . It is not necessary to set a ny jump - ers[...]

DiamondMax 22 Serial ATA Product Manual, Re v. A 3 2.0 Drive specifications Unless otherwise noted, all specific ations are measur ed under ambient conditions, at 25°C, and nominal power . For convenienc e, the phrases the drive and this drive are used throughout this manual to in dicate the following drive models: S pecification summary t ables T[...]

4 DiamondMax 22 Serial ATA Produc t Manual, Rev. A T able 1: Drive specifications summary for 1000 Gbyte mo dels Drive specification STM31000334AS Formatted capacity (512 bytes/sector)* 1000 Gbytes Guaranteed sectors 1,953,525,168 Heads 6 Discs 3 Bytes per sector 512 Default sectors per track 63 Default read/write heads 16 Default cylinders 16,383 [...]

DiamondMax 22 Serial ATA Product Manual, Re v. A 5 * One Gbyte equals one billion bytes when referring to h ard driv e capacity. Accessible capacity may vary depending on operating environment and formatting. * *During periods of drive idle, some offli ne activity may occur according to the S.M.A.R.T. specification, which may increase a coustic and[...]

6 DiamondMax 22 Serial ATA Produc t Manual, Rev. A T able 2: Drive specifications summary for 320 and 160 G byte models Drive specification STM3320614AS STM3160813AS Formatted capacity (512 bytes/sector)* 320 Gbytes 160 Gbytes Guaranteed sectors 625,142,448 312,581,808 Heads 2 1 Discs 1 Bytes per sector 512 Default sectors per track 63 Default read[...]

DiamondMax 22 Serial ATA Product Manual, Re v. A 7 * One Gbyte equals one billion bytes when referring to h ard driv e capacity. Accessible capacity may vary depending on operating environment and formatting. * *During periods of drive idle, some offli ne activity may occur according to the S.M.A.R.T. specification, which may increase a coustic and[...]

8 DiamondMax 22 Serial ATA Produc t Manual, Rev. A 2.1 Formatted cap acity *One Gbyte equals one billion bytes when referri ng to hard drive capacity. Accessible c apa city may vary depending on o perating environment and formatting. 2.1.1 LBA mode When addressing these d rives in LBA mode, all bloc ks ( sectors) are consecutively numbered fr om 0 [...]

DiamondMax 22 Serial ATA Product Manual, Re v. A 9 2.4 Physical characteristics 2.5 Seek time Seek measurement s are t aken with nominal p ower at 25°C ambient temperatur e. All times are measured using drive diagnostics. The specifications in th e table belo w are defined as follows: • T rack-to-trac k seek time is an average of all possible si[...]

10 DiamondMax 2 2 Serial ATA Product M anual, Rev. A 2.6 St art/stop times 2.7 Power specifications The drive receives DC power (+ 5V or +12V) thro ugh a na tive SA T A power connector . See Figure 4 on page 22. 2.7.1 Power co nsumption Power requirement s for the drives are listed in the table on page 9. T ypical power measurement s are based on a[...]

DiamondMax 22 Serial ATA Product Manual, Re v. A 11 T able 3: DC power require ment s * During periods of drive idle, some offline activity may occur according to the S.M.A.R. T. specification, which may increase ac oustic and power to operational levels . T able 4: DC power require ment s * During periods of drive idle, some offline activity may o[...]

12 DiamondMax 2 2 Serial ATA Product M anual, Rev. A 2.7.1.1 T ypical cu rrent profiles Figure 1. T ypical 5V st artup and operation curren t profile Figure 2. T ypical 12V startup and operation curre nt profile[...]

DiamondMax 22 Serial ATA Product Manual, Re v. A 13 2.7.2 C onducted noise Input noise ripp le is measured at the host system powe r supply across an equivalent 80-ohm resistive load o n the +12 volt line or an equival ent 15-ohm resistive load on the +5 volt line. • Using 12-volt power , the drive is ex pected to oper ate with a maximum of 120 m[...]

14 DiamondMax 2 2 Serial ATA Product M anual, Rev. A 2.8 Environment al specifications 2.8.1 Ambient tempe rature Ambient temperatur e is defined as the temperatur e of the en vironmen t immediatel y surr ounding the drive. Actual drive c ase temperature should not exce ed 69°C (156°F) within the operatin g ambient conditio ns. Above 1,000 feet ([...]

DiamondMax 22 Serial ATA Product Manual, Re v. A 15 2.8.5 Sho ck All shock specifications assu me that the drive is mounted secu rely with the input sh ock applied at the drive mounting screws. Shock may be applied in the X, Y or Z axis. 2.8.5.1 Operating shock These drives comply with t he performance levels specifie d in this document when subj e[...]

16 DiamondMax 2 2 Serial ATA Product M anual, Rev. A 2.9 Acoustics Drive acoustics are measured as ov erall A-weighted ac oustic sound power levels (no pure tones). All mea- surements ar e consistent with ISO document 7779. Soun d power measurem en ts a re ta ken under essentially free-field conditions over a reflecting plane. Fo r all te sts, the [...]

DiamondMax 22 Serial ATA Product Manual, Re v. A 17 2.1 1 Reliability 2.1 1.1 Annualized Failure Rate ( AFR) and Mean T ime Between Failure s (MTBF) The product shall achi eve an Annualized Failure Rate (AFR) of 0.34% (MTBF of 0.7 million hours) when oper- ated in an envir onment of ambien t air temperatures of 25 ° C. Operation at temperatures ou[...]

18 DiamondMax 2 2 Serial ATA Product M anual, Rev. A Korean RRL If these dr ives have the Ko rea Ministry of Informat ion and Communication (MIC ) logo, they comply with paragraph 1 of Article 1 1 of the El ectromagnetic Compatibility control Regulation and m eet the Electromagnetic Compatibility (EMC) Framework requirement s of the Radio Research [...]

DiamondMax 22 Serial ATA Product Manual, Re v. A 19 2.13 Environment al protection Seagate des igns its products to meet environme nt al pr otection requirements worl dwide, including regula tions restricting certain chemical substances. 2.13.1 European Un ion Restriction of Hazardous Subst ances (RoHS) Directive Seagate des igns its products to me[...]

20 DiamondMax 2 2 Serial ATA Product M anual, Rev. A[...]

DiamondMax 22 Serial ATA Product Manual, Re v. A 21 3.0 Configuring and mounting the drive This section contains the specif ications an d instructions for configuring and mounting the drive. 3.1 Handling and st atic-dis charge precautions After unp acking, and befo re installation, the drive may be exposed to po tential handling and ele ctrostatic [...]

22 DiamondMax 2 2 Serial ATA Product M anual, Rev. A 3.2 Configuring the drive Each drive on the Seri al A T A interface connect s point-to-point with the Serial A T A host ada pter . There is no master/slave rela tionship because each drive is consider ed a master in a point-to -point relationship. If two drives are attached on one Serial A T A ho[...]

DiamondMax 22 Serial ATA Product Manual, Re v. A 23 3.4 Drive mounting Y ou can mount the drive in any orient ation using four screws in the side-mounting holes or four screws in the bottom-mo unting holes. See Fi gure 5 for drive mo unting dimension s. Follow these im portant mounting preca u- tions when m ounting the drive : • Allow a minimum c[...]

24 DiamondMax 2 2 Serial ATA Product M anual, Rev. A Figure 6. Mounting dimensions (320 and 160 GB models)[...]

DiamondMax 22 Serial ATA Product Manual, Re v. A 25 4.0 Serial A T A (SA T A) interface These drives use the industry-s tandar d Serial A T A interfac e th at support s FIS dat a transfers. It support s A T A programmed input/o utput (PIO) modes 0–4; mult iword DMA modes 0–2, and Ultr a DMA modes 0–6. For det ailed information abou t the Seri[...]

26 DiamondMax 2 2 Serial ATA Product M anual, Rev. A 4.2 Serial A T A device p lug connector pin definitions Table 7 summarizes the sig nals on the Se rial ATA interface and power co nnectors. . Notes: 1. All pins are in a single row , with a 1.27 mm (0.050”) pitch. 2. The comment s on the mating sequence a pply to the case of backplane blin dmat[...]

DiamondMax 22 Serial ATA Product Manual, Re v. A 27 4.3 Supported A T A commands The following t able list s Serial A T A standa rd commands that the drive support s. For a deta iled description of the A T A commands, re fer to the Se rial A T A Internatio nal Organization: Seria l A T A Revision 2.6 (http :// www .sata-io.org). See “S.M.A.R.T . [...]

28 DiamondMax 2 2 Serial ATA Product M anual, Rev. A Security Erase Unit F4 H Security Freeze F5 H Security Set Password F1 H Security Unlock F2 H Seek 70 H Set Features EF H Set Max Address F9 H Note: Individual Set Max Address commands are identifie d by the value placed in the Set Max Features regis - ter as defined to the right. Address: Passwo[...]

DiamondMax 22 Serial ATA Product Manual, Re v. A 29 4.3.1 Identify Dev ice command The Identify Device command (command code EC H ) transfers information about the drive to the host following power up. The da ta is organized as a single 512-b yte block of data, whose conten ts are shown in T able 8 on page 27. All reserved bits or words should be s[...]

30 DiamondMax 2 2 Serial ATA Product M anual, Rev. A 60–61 T otal number of user-addressable LBA sectors availabl e (see Section 2.1 for related information) *Note: The maximum value all owed in this field is: 0FFFFFFFh (268,435,455 sectors, 137 Gbytes). Drives with capacities over 137 Gbytes will have 0FFFFFFF h in this field and the actual numb[...]

DiamondMax 22 Serial ATA Product Manual, Re v. A 31 Note. Advance d Power Management (APM) and Automatic Acou stic Management (AAM) feat u res are not supported Note. See the bit descriptio ns below for words 63 , 84, and 88 of the Identify Drive data. 108–1 1 1 The mandatory valu e of the world wide name (WWN) for the drive. NOTE: This field is [...]

32 DiamondMax 2 2 Serial ATA Product M anual, Rev. A Bit Wor d 88 0 Ultra DMA mode 0 is supported. 1 Ultra DMA mode 1 is supported. 2 Ultra DMA mode 2 is supported. 3 Ultra DMA mode 3 is supported. 4 Ultra DMA mode 4 is supported. 5 Ultra DMA mode 5 is supported. 6 Ultra DMA mode 6 is supported. 8 Ultra DMA mode 0 is currently active. 9 Ultra DMA m[...]

DiamondMax 22 Serial ATA Product Manual, Re v. A 33 4.3.2 Set Featu res command This command controls the implement ation of various fe at ures that th e drive support s. When the drive receives this command, it sets BSY , checks the contents of the Featur es register , clears BSY and gen erates an inte r- rupt. If the value in the register does n [...]

34 DiamondMax 2 2 Serial ATA Product M anual, Rev. A 4.3.3 S.M.A .R.T . commands S.M.A.R.T . provides near-term failure prediction fo r disc drives. When S.M.A.R.T . is enabled, the d rive moni- tors predetermined drive attributes that are suscep tible to degradation over time. If self- monitoring determin es that a failure is likely , S.M.A.R.T . [...]

DiamondMax 22 Serial ATA Product Manual, Re v. A 35 5.0 Seagate T echnology support services Online services Internet For information regardin g Seagate product s and services, visit www .seagate.com . Worldwide support is available 24 hours daily by ema il for your questions. Presales Support: Presales@Seagate.com T echnical Support: DiscSupport@S[...]

36 DiamondMax 2 2 Serial ATA Product M anual, Rev. A Customer Service Operations W arranty Servi ce Seagate of fers worldwide customer support for Seagate product s. Seagate distributor s, OEMs and othe r direct customers should contact their Seagate Customer Ser v ice Operat ions (CSO) represen tative for warranty- related issues. Resellers or en [...]

DiamondMax 22 Serial ATA Product Manual, Re v. A 37 Index A ACA 18 acceleration 15 acoustics 16 Active 13 Active m ode 13 actuator arm 10 AFR 17 Agency certification 17 altitude 14 Ambient temperature 14 ambient temperature 9 , 10 Annualized Failure Rate 17 Annualized Failure Rate (AFR) 17 areal density 1 , 8 ATA commands 27 Australia/New Zealand S[...]

38 DiamondMax 2 2 Serial ATA Product M anual, Rev. A I I/O data-transfer rate 8 I/O duty cycle 17 Identify Device 27 Identify Device command 29 Idle 13 , 27 Idle Immediate 27 Idle mode 10 , 13 IEC950 17 Information Technology Equipment (ITE) 17 Initialize Device Parameters 27 Input noise ripple 13 input voltage 10 interface 8 , 25 interference 18 i[...]

DiamondMax 22 Serial ATA Product Manual, Re v. A 39 RMS read/write current 13 RoHS 19 RRL 18 S S.M.A.R.T. Disable Operations 28 S.M.A.R.T. Enable Operations 28 S.M.A.R.T. Enable/Disable Autosave 28 S.M.A.R.T. Execute Offline 28 S.M.A.R.T. implementation 27 S.M.A.R.T. Read At tribute Thresh olds 28 S.M.A.R.T. Read Data 28 S.M.A.R.T. Read Log Sector [...]

40 DiamondMax 2 2 Serial ATA Product M anual, Rev. A[...]

[...]

Seagate T echnology LLC 920 Disc Drive, Scotts V a lley , California 95066 -4544, USA Publication Number: 1005442 18, Rev . A, Printed in U.S.A.[...]