Mercedes-Benz 2010 CL600 manuale d’uso

CL Operator’s Manual 216_AKB; 3; 90, en-US d2ureepe, Version: 2.11.8.1 2009-05-15T11:47:50+02:00 - Seite 1[...]

Symbols Trademarks: R Bluetooth ® is a registered trademark of Bluetooth SIG Inc. R DTS is a registered trademark of DTS, Inc. R Dolby and MLP are registered trademarks of Dolby Laboratories. R PRE-SAFE ® is a registered trademarks of Daimler. R HomeLink ® is a registered trademark of Prince, a Johnson Controls Company. R iPod ® and iTunes ® a[...]

Our company and staff congratulate you on the purchase of your new Mercedes-Benz. Your selection of our product is a demonstration of your trust in our company name. Furthermore, it exemplifies your desire to own an automobile that will be as easy as possible to operate and will provide years of service. Your Mercedes-Benz represents the efforts of[...]

216_AKB; 3; 90, en-US d2ureepe, Version: 2.11.8.1 2009-05-15T11:47:50+02:00 - Seite 2[...]

Index ....................................................... 4 Introduction ......................................... 20 At a glance ........................................... 25 Safety and security ............................. 35 Control systems .................................. 67 Controls in detail .............................. 251 Operatio[...]

1, 2, 3 ... 4-ETS see ETS/4-ETS 4MATIC see All-wheel drive (4MATIC) 911 emergency call .......................... 137 A ABC (Active Body Control) ................ 319 Messages in the multifunction display ........................................... 419 ABS (Antilock Brake System) ............. 57 Indicator lamp ................................ 451 [...]

Armrest, front Storage compartment .................... 349 Storage tray/telephone compartment ................................. 349 Armrest, rear Storage compartment .................... 349 Ashtray ............................................... 352 Aspect ratio (tires) ............................ 393 Assistance menu ............................[...]

C CAC (Customer Assistance Center) ... 23 California retail buyers and lessees, important notice for ............. 21 Calls (phone) .............................. 135, 211 Can holders see Cup holders Capacities and recommended fuel/lubricants .................................. 490 Carpets, cleaning .............................. 409 CD player .....[...]

Audio ............................................. 207 Navi ............................................... 206 Service ........................................... 214 Settings ......................................... 214 Telephone ...................................... 211 Trip ................................................ 204 Coolant Anticor[...]

Driving Abroad ........................................... 401 Hydroplaning ................................. 400 Instructions ........................... 285, 397 In winter ........................................ 396 Problems ....................................... 288 Safety systems ................................ 56 Systems ...................[...]

Engine oil Adding ........................................... 371 Additives ........................................ 493 Checking level ............................... 369 Consumption ................................. 369 Messages in the multifunction display ........................................... 444 Oil dipstick .............................[...]

Gearshift pattern ........................... 291 Shifting procedure ......................... 293 Transmission position indicator ..... 294 Transmission positions .................. 294 Generator see Alternator Global locking/unlocking see Key, SmartKey Glove box ........................................... 348 Gracenote ® Media Database .........[...]

Interior storage spaces see Storage compartments Intermittent wiping ........................... 281 Rain sensor .................................... 281 iPod ® (media interface) .................... 183 ISOFIX (Child seat anchors – LATCH-type) see Children in the vehicle J Jack ..................................................... 413 Jump star[...]

Lighting .............................................. 274 Daytime running lamp mode .......... 276 Exterior .......................................... 275 Interior ........................................... 279 Limp-home mode .............................. 299 Load index (tires) ...................... 389, 394 Loading see Veh icle loadin g Locki[...]

Light sensor ................................... 448 Low-beam lamps ............................ 448 Night View Assist ........................... 438 Park Assist ..................................... 422 Parking lamps ................................ 447 PRE-SAFE ® .................................... 416 Radar sensors ...........................[...]

P Paintwork, cleaning .......................... 404 Paintwork code ................................. 481 Panic alarm .......................................... 55 Parcel nets ......................................... 348 Park Assist ......................................... 324 Cleaning system sensors ............... 406 Collision warning ........[...]

Rear seat head restraints see Head restraints Rear side window Override switch ................................ 55 Rear view camera .............................. 332 Cleaning the camera lens .............. 407 Rear window defroster ..................... 344 Recommended tire inflation pressure ..................................... 374, 394 Refriger[...]

Selective setting (KEYLESS-GO) ..... 255 Selective setting (SmartKey) .......... 253 Time ................................................. 79 Trunk opening-height restriction .... 193 Voice Control System ...................... 80 Shelf below rear window, cleaning .. 409 Shortcut buttons ................................. 69 Side impact air bags ..[...]

Tele Aid ............................................... 353 Automatic Maintenance Call .......... 359 Emergency calls ............................. 354 Information button ......................... 357 Initiating an emergency call manually ........................................ 355 Messages in the multifunction display ...........................[...]

Treadwear indicators ............. 386, 395 Vehicle maximum load on .............. 395 Wear pattern .................................. 388 Winter tires ............................ 395, 486 Tire speed rating ....................... 390, 395 Top tether see Children in the vehicle Total load limit ................................... 395 Towing Towing[...]

Vehicle specification CL 550 4MATIC ............................. 483 CL 600 ........................................... 483 CL 63 AMG .................................... 484 CL 65 AMG .................................... 485 Vehicle status message memory .... 214 Vehicle tool kit .................................. 412 Vehicle washing see Vehicle [...]

Product Information Please observe the following in your own best interest: We recommend using Genuine Mercedes- Benz Parts as well as conversion parts and accessories explicitly approved by us for your vehicle model. We have tested these parts to determine their reliability, safety and special suitability for Mercedes-Benz vehicles. We are unable [...]

Rhode Island, and Vermont Emission Control System Warranty R State Warranty Enforcement Laws (Lemon Laws) Important notice for California retail buyers and lessees of Mercedes-Benz automobiles Under California law you may be entitled to a replacement of your vehicle or a refund of the purchase price or lease price, if after a reasonable number of r[...]

contacting you in a timely manner should the need arise. If you sell your Mercedes, please leave all literature with the vehicle to make it available to the next operator. If you bought this vehicle used, be sure to send in the “Notice of Purchase of Used Car” found in the Service and Warranty Information Booklet, or call the Mercedes- Benz Cus[...]

Proper use of the vehicle Proper use of the vehicle requires that you are familiar with the following information and rules: R the safety precautions in this manual R the “Technical data” section in this manual R traffic rules and regulations R motor vehicle laws and safety standards G Warning! Various warning labels are attached to your vehicl[...]

This information helps, for example, to diagnose vehicle systems after a collision and to continuously improve vehicle safety. Daimler may access the information and share it with others R for safety research or vehicle diagnosis purposes R with the consent of the vehicle owner or lessee R in response to an official request by law enforcement or ot[...]

Exterior view ....................................... 26 Cockpit ................................................. 27 Instrument cluster .............................. 29 Control systems .................................. 31 Center console .................................... 33 Overhead control panel ...................... 34 Driver’s door contr[...]

Exterior view i This Operator’s Manual describes all features, standard or optional, potentially available for your vehicle at the time of purchase. Please be aware that your vehicle might not be equipped with all features described in this manual. Function Page : Trunk: Locking and unlocking 252 Opening and closing 257, 258 Valet locking 261 ; R[...]

Cockpit Function Page : Combination switch: Turn signals 277 Wipers 280 High beam 278 ; Cruise control lever: Cruise control 302 DISTRONIC PLUS 304 = Horn ? Multifunction steering wheel 202 A Instrument cluster 29, 300 B Steering wheel gearshift control 297 C Gear selector lever 291 D Control panel with: Front passenger front air bag off indicator [...]

Function Page L Steering wheel adjustment stalk 270 Heated steering wheel 270 M Electronic parking brake 288 N Door control panel 34 O Hood lock release 368 Function Page P On-board diagnostics (OBD) socket Q Night View Assist 333 R Exterior lamp switch 275 28 Cockpit At a glance 216_AKB; 3; 90, en-US d2ureepe, Version: 2.11.8.1 2009-05-15T11:47:50[...]

Instrument cluster Function Page : Coolant temperature gauge 300 ; Fuel gauge with: Fuel tank reserve warning lamp 457 K High-beam headlamp indicator lamp 277 ! Antilock Brake System (ABS) indicator lamp 451 6 Supplemental Restraint System (SRS) indicator lamp 455 = Parktronic/Park Assist warning indicator for left front area 323, 326 ? Multifuncti[...]

Function Page å ESC OFF warning lamp 435 j Parking space indicator lamp 327 A Parktronic/Park Assist warning indicator for right front area 323, 326 B Transmission position/ range indicator 295 C Tachometer with: ; Engine malfunction indicator lamp 457 Function Page D Program mode indicator 296 E Main menus for instrument cluster control system 20[...]

Control systems Function Page : Press button % briefly to cancel Voice Control System, back, confirm messages. Press and hold button % to select the standard display. ; Press button = or ; to select menus. Press button : or 9 briefly: to select function or scroll through lists within Audio menu to select previous or next track, scene or stored stat[...]

Function Page Press button W or X : to set the volume to operate the RACETIMER 2 A Press button ? : to activate Voice Control System 218 to accept a call 143 B Instrument cluster illumination 300 C Swiveling COMAND display 70 D COMAND display illumination 70 E COMAND display 69 F Clock 79 G CD/DVD changer 165 H SD card slot 166 I Rear window sunsha[...]

Center console Function Page : Thumbwheel for air volume control for left center air vent 342 ; Thumbwheel for air volume control for right center air vent 342 = Air distribution and air volume, driver’s side (automatic mode) 341 ? Temperature control, driver’s side 341 A Manual fan speed adjustment, driver’s side 342 B Front defroster 343 C [...]

Overhead control panel Function Page : Eyeglasses compartment 348 ; Left reading lamp on/off 279 = Rear interior lighting on/off 279 ? Front interior lighting on/ off 279 A Power tilt/sliding sunroof switch 345 B SOS button (Tele Aid system) 353 C Automatic interior lighting control 279 D Right reading lamp on/off 279 E Interior rear view mirror 27[...]

Vehicle equipment .............................. 36 Occupant safety .................................. 36 Panic alarm .......................................... 55 Driving safety systems ....................... 56 Anti-theft systems .............................. 65 35 Safety and security 216_AKB; 3; 90, en-US d2ureepe, Version: 2.11.8.1 2009-05-15[...]

Vehicle equipment i This Operator’s Manual describes all features, standard or optional, potentially available for your vehicle at the time of purchase. Please be aware that your vehicle might not be equipped with all features described in this manual. Occupant safety Introduction In this section you will learn the most important facts about the [...]

For your safety, we strongly recommend that you contact an authorized Mercedes-Benz Center immediately to have the system checked. Otherwise the SRS may not be activated when needed in an accident, which could result in serious or fatal injury. The SRS might also deploy unexpectedly and unnecessarily which could also result in injury as well. In ad[...]

R Adjust the front passenger seat as far as possible rearward from the dashboard when the seat is occupied. R Occupants, especially children, should never place their bodies or lean their heads in the area of the door where the side impact air bag inflates. This could result in serious injuries or death should the side impact air bag be deployed. A[...]

It is important to your safety and that of your passengers to have deployed air bags replaced and to have any malfunctioning air bags repaired. This will help to make sure the air bags will continue to provide supplemental crash protection for occupants. Safety guidelines for the seat belt, Emergency Tensioning Device (ETD) and air bag G Warning! R[...]

Front air bags G Observe Safety notes, see page 37. Driver’s front air bag : and front passenger front air bag ; are designed to provide increased protection for the driver and front passenger against the risk of injuries to the head and thorax. Driver and front passenger front air bag and driver’s side knee bag are deployed R in the event of c[...]

Front side impact air bags : and rear side impact air bags ; are designed to provide increased protection for the thorax but not the head, neck and arms. The side impact air bags are deployed R on the impacted side of the vehicle R in instances with a high rate of lateral vehicle deceleration or acceleration R regardless of whether the seat belts o[...]

The system does not deactivate R the front passenger side impact air bag R the window curtain air bag R the Emergency Tensioning Devices (ETDs) To be classified correctly, the front passenger must sit R with the seat belt properly fastened R in a position that is as upright as possible with the back against the seat backrest R with the feet on the [...]

If the 42 indicator lamp is not illuminated, the front passenger front air bag is activated and will be deployed R in the event of certain frontal impacts R if impact exceeds a preset deployment threshold R independently of the side impact air bags If the front passenger front air bag is deployed, the rate of inflation will be influenced by R the r[...]

injured or even killed if the front passenger front air bag inflates. R If you have to place a child in a forward- facing child restraint on the front passenger seat, move the seat as far back as possible, use the proper child restraint recommended for the age, size and weight of the child, and secure child restraint with the vehicle’s seat belt [...]

OCS Self-test After turning the SmartKey in the starter switch to position 1 or 2 or pressing the KEYLESS-GO start/stop button once or twice, the 42 indicator lamp illuminates. If an adult occupant is properly sitting on the front passenger seat and the system classifies the occupant as an adult, the 42 indicator lamp will illuminate and go out aft[...]

seat belt provide the best restraint when the wearer is in a position that is as upright as possible and the seat belt is properly positioned on the body. G Warning! Never let more people ride in the vehicle than there are seat belts available. Make sure everyone riding in the vehicle is correctly restrained with a separate seat belt. Never use a s[...]

around a person and another person or other objects at the same time. R Seat belts should not be worn twisted. In a crash, you would not have the full width of the seat belt to distribute impact forces. The twisted seat belt against your body could cause injuries. R Pregnant women should also always use a lap/shoulder belt. The lap belt portion sho[...]

To release the seat belt with seat belt release button ? , see ( Y page 48). Releasing the seat belts X Press seat belt release button ? ( Y page 47). Allow the retractor to completely rewind the seat belt by guiding latch plate ; ( Y page 47). ! Make sure the seat belt retracts completely. Otherwise the seat belt and/or latch plate could get caugh[...]

The ETDs for the rear seats will activate with or without the respective seat belts fastened. In an impact, the ETDs remove slack from the seat belts in such a way that the seat belts fit more snugly against the body. Seat belt force limiters, when activated, are employed to help reduce the peak force exerted by the seat belts on occupants during a[...]

If the seat belts do not release: X Adjust the seat backrest to the rear until the seat belt tension is reduced. The locking mechanism releases. ! When adjusting the seat backrests, make sure there are no items behind the seats. Otherwise, you could damage the seats and/or the items. Correct driver seat adjustment G Warning! In order to avoid possi[...]

R The seat backrest must be in a position that is as nearly upright as possible. R Adjust the seat cushion so that the front edge of the seat cushion lightly supports your legs. R Adjust the head restraint so that it is as close to the head as possible and the center of the head restraint supports the back of the head at eye level. R Never place ha[...]

To deactivate the special seat belt retractor: X Release the seat belt buckle and let the seat belt retract completely. The seat belt can then again be used in the usual manner. To deactivate the special seat belt retractor for the front passenger seat, the front passenger seat must be in the most backward position. G Warning! Never release the sea[...]

recommend that you always place a child in a rear-facing child restraint in a backseat. R If you must install a rear-facing child restraint on the front passenger seat because circumstances require you to do so, make sure the 42 indicator lamp is illuminated, indicating that the front passenger front air bag is deactivated. Should the 42 indicator [...]

X Guide top tether strap ? between the head restraint and top of the seat backrest. The head restraint must be positioned such that top tether strap ? can pass freely between the head restraint and top of the seat backrest. X Make sure top tether strap ? is not twisted. X Securely fasten hook = , which is part of top tether strap ? , to anchorage r[...]

X Fold upholstery blend = upward to access anchors ; . X Turn installation device ? to a vertical position so that upholstery blend = does not fold down. X Install a LATCH-type (ISOFIX) child seat according to the manufacturer’s instructions. A rigid connection between the child seat and the body of the vehicle is established. Child safety Overri[...]

i USA only: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. this device must accept any interference received, including interference that may cause undesired operation. Any unauthorized modification to this device could void the user[...]

ABS G Observe Safety notes, see page 56. G Warning! Do not pump the brake pedal. Use firm, steady brake pedal pressure instead. Pumping the brake pedal defeats the purpose of the ABS and significantly reduces braking effectiveness. The Antilock Brake System (ABS) regulates the brake pressure so that the wheels do not lock during braking. This allow[...]

sensor system for vehicles from outside of Canada. When you switch off the radar system, the following functions are deactivated: R BAS PLUS R PRE-SAFE ® Brake ( Y page 62) R DISTRONIC PLUS ( Y page 304) R Park Assist ( Y page 324) R Blind Spot Assist ( Y page 335) R Advanced Parking Guidance ( Y page 327) G Warning! BAS PLUS is a convenience syst[...]

BAS PLUS uses radar signals that are not reflected well by narrow objects and absorptive materials. For this reason BAS PLUS will not react to persons, animals, and approaching traffic or cross-traffic. BAS PLUS may not detect narrow vehicles driving in front of you, such as motorcycles and vehicles driving offset from your vehicle center. After a [...]

The ESC warning lamp ÷ in the instrument cluster comes on when you switch on the ignition. It goes out when the engine is running. G Warning! Never switch off the ESC when you see the ESC warning lamp ÷ flashing in the instrument cluster. In this case proceed as follows: R When driving off, apply as little throttle as possible. R While driving, e[...]

To improve the vehicle’s traction, switch off the ESC. This allows the drive wheels to spin and thus cut into surfaces for better grip, for example R when driving with snow chains R in deep snow R in sand or gravel G Warning! Switch on the ESC immediately if the aforementioned circumstances do not apply anymore. Otherwise the ESC will not stabili[...]

R the cruise control or the DISTRONIC PLUS cannot be activated R the cruise control or the DISTRONIC PLUS switch off if activated i When the ESC is switched off and one or more drive wheels are spinning, the ESC warning lamp ÷ in the instrument cluster flashes. However, the ESC will then not stabilize the vehicle. X With the engine running, switch[...]

Always pay attention to traffic conditions even while the PRE-SAFE ® Brake is switched on. Otherwise, you may not be able to recognize dangerous situations until it is too late and could cause an accident resulting in personal or fatal injury to you or others. i USA only: This device has been approved by the FCC as a “Vehicular Radar System”. [...]

brake pedal. Objects stored in this area may impair pedal movement which could interfere with the braking ability of the PRE-SAFE ® Brake. Do not place your foot under the brake pedal – your foot could become caught. To maintain the proper distance to the vehicle in front of you and thus prevent a rear-end collision, you must apply the brakes yo[...]

Anti-theft systems Immobilizer The immobilizer prevents unauthorized persons from starting your vehicle. When leaving the vehicle, always take the SmartKey with you and lock the vehicle. The engine can be started by anyone with a valid SmartKey that is left inside the vehicle. Activating X With SmartKey: Remove the SmartKey from the starter switch.[...]

i Unless you open a door or the trunk within approximately 40 seconds after unlocking the vehicle: R The vehicle will be locked again. R The anti-theft alarm system will be rearmed. Canceling the alarm To cancel the alarm, do one of the following: X Insert the SmartKey into the starter switch. X Press button % or & on the SmartKey. In vehicles [...]

Vehicle equipment .............................. 68 COMAND introduction ........................ 68 COMAND system settings ................. 79 COMAND navigation (introduction) ... 83 COMAND navigation system (entering a destination) ...................... 93 COMAND navigation system (Point of interest entry) ............................... 111 COM[...]

Vehicle equipment i This Operator’s Manual describes all features, standard or optional, potentially available for your vehicle at the time of purchase. Please be aware that your vehicle might not be equipped with all features described in this manual. COMAND introduction COMAND operating safety COMAND ( Cockpit Management and Data System) is an [...]

COMAND components COMAND can be used to operate: R Audio functions R Navigation system R Telephone R External audio and video sources R Video DVD R Various vehicle settings COMAND consists of the following: R COMAND shortcut buttons R COMAND display R Telephone keypad R COMAND controller R Built-in USB socket to connect USB storage devices R Option[...]

The currently selected main function is highlighted. Once you have selected a main function, main area = is active. i The layout of the menus may vary depending on your vehicle’s equipment. This manual shows the menus for a fully equipped vehicle. Adjusting COMAND display illumination X Increasing the illumination: Turn knob : clockwise. X Dimmin[...]

R select a scene/chapter from a video DVD ( Y page 177) R select a street in the navigation entry ( Y page 102) COMAND controller Use the COMAND controller to select menu functions shown on the COMAND display. Operating COMAND controller You can operate the COMAND controller as follows: R press briefly or press and hold R rotate to the left or righ[...]

Symbol How to use the COMAND controller X V Y X Slide R to move through horizontal menus R to exit vertical menus X Slide and hold R for fast forward or reverse for audio CD or audio DVD playback R to move through a navigation map a V b X Slide and hold R to move through a navigation map USB socket Connect USB storage device to the built-in USB soc[...]

Example: The main function Video contains the menus DVD-Video , AUX and the function Video Off . Navi Audio Telephone Video Vehicle Mode FM/AM Radio Video DVD Multi-function Contour Seat Settings/ Lumbar Settings Map Orientation Sat. Radio AUX Rear Window Sunshade POI Symbols On Map Disc Video OFF Easy Entry/Exit Traffic Symbols on Map Memory Card [...]

Calling up the main menu Example illustration: Audio main menu You can call up the main menu of a main function in the following manner: X Moving to the main function line: Slide Z V . X Selecting a main function: Slide X V Y or rotate c V d . X Confirming selection: Press W . i When a main function (e.g. Navi ) is open and you want to open the men[...]

Selecting characters X Slide X V Y or rotate c V d . X Confirming selection: Press W . Deleting individual characters X Select F in the bottom line and press W once for each character you wish to delete Deleting entire words or numbers X Select F in the bottom line. Press and hold W until the word or number is deleted. Exiting character entry X Sel[...]

X Switching to the next higher menu: Press back button % briefly. COMAND switches to the next higher menu level within the currently active operating mode. X Switching to the main menu: Press and hold back button % . COMAND switches to the main menu of the currently active operating mode. Basic functions i The components and operating principles of[...]

Selecting sound settings You can select different bass and treble settings for the individual audio and video sources. The respective sound menu can be found via the submenu for which you wish to make settings. Example: Audio Q FM/AM Radio Q Sound Adjusting treble or bass X Select Sound Q Treble or Bass . The setting last selected is indicated by a[...]

necessary to adapt the audio format ( Y page 172). i By selecting Logic7 ® OFF , all compatible formats are played back as they are present on the medium. Due to the design of the passenger compartment, an optimum audio experience cannot be guaranteed for all passengers. Adjusting 3-D sound With 3-D sound, you can choose between Logic7 ® ON and L[...]

COMAND system settings System settings submenu overview i The components and operating principles of COMAND can be found on ( Y page 68). System settings can be made in the following submenus: R Display Q Day Mode , Night Mode , Automatic R Time Q Time , Date , Format , Time Zone R Text Reader Q Speed Q Fast , Medium or Slow : Adjusts the reading s[...]

Change the settings in the following order: 1. Time zone 2. Daylight savings time/standard time 3. Time lag (only necessary in exceptional cases) Setting the time zone and switching between daylight savings time and standard time X Setting time zone: Select Vehicle Q System Q Time Q Time Zone . The country list appears. The dot # in front of a list[...]

Individualization consists of two parts. You train the system to recognize digits in the first part and specific commands in the second part. Starting new individualization i The vehicle must be stationary to start individualization. After starting the session, acoustic instructions will guide you through the individualization. X Select Vehicle Q S[...]

You can switch the massage function for the driver’s seat on or off. R Front Passenger Seat Massage ( Y page 199) You can switch the massage function for the passenger seat on or off. R Driver and Front Passenger Seat Massage ( Y page 199) You can switch the massage function for the driver’s and passenger seat on or off. R Display OFF ( Y page [...]

COMAND navigation (introduction) Safety notes G Warning! For safety reasons, only enter a destination when the vehicle is stationary. When the vehicle is in motion, a passenger should enter the destination. Study manual and select route before driving. Bear in mind that at a speed of just 30 mph (approximately 50 km/h), your vehicle is covering a d[...]

When reinstalling a map software that has been installed in that vehicle already, an activation code is not required. Installation process i The installation process can take between 10 and 120 minutes, depending on the size of the map software. If the radio is switched on when you start the installation process, you can still adjust the volume. Du[...]

X Select Yes or No . When you select Yes , the current map data will be overwritten. When you select No , the DVD will be ejected automatically and the installation process is cancelled. X Remove the DVD from the slot. Map data not installed yet The versions of the map software on the DVD and of the installed map software appear in the COMAND displ[...]

X Wait until the vehicle interior has cooled. X Start the installation of the map software once more. R If these measures do not solve the problem: X Contact an authorized Mercedes-Benz Center. General notes Operational readiness of the navigation system following a system software update by an authorized Mercedes- Benz Center After a system softwa[...]

Interrupting the journey during route guidance The following applies if you interrupt the journey during route guidance and continue the journey later: R COMAND resumes route guidance automatically if you continue the journey within 2 hours. R Route guidance is canceled if you continue the journey after more than 2 hours. It will be necessary to re[...]

Info (only with route guidance active) Traffic Route Position RPT (only with route guidance active) Destination Informati on about the active route guidance Calling up real-time traffic messages R Displaying detour function R Displaying alternative route R Displaying symbol information R Displaying route information R Saving vehicle position R Call[...]

Example illustration: Map with route guidance inactive and with the menu system hidden (full screen map display) : Current vehicle position ; Map orientation ( Y page 90) = Map scale ( Y page 89) Hiding or showing the menu system X Hiding: Slide Z V . The Full Screen menu item appears in the main area of the display. X Press W . or X Press and hold[...]

: Cross hair ; Details of the cross hair position = Map scale i Display ; may be the name of a road or a road icon, for example, provided the digital map contains the necessary data. If no data is available, display ; shows: R the coordinates of the cross hair if the Geo Coordinates display is switched on ( Y page 92) and the GPS signal is strong e[...]

R Bird’s-eye View: Map display : is oriented in the direction into which you are heading; the orange tip of the symbol points to the North. R 3-D Map: Certain buildings in selected cities are displayed in detail as a 3-D (three- dimensional) model. The map displays mountains and valleys three- dimensionally. The 3-D map is country- specific and i[...]

X Calling up menu: Select Navi Q Text Information on Map . The list of available text information appears. The dot # indicates the currently selected setting. X Exiting menu: Slide X V Y . Time of arrival and distance X Select Arrival Time/Distance . The time of arrival and the distance for the main destination are displayed by setting the dot to A[...]

X Select Navi . X Check the check box for menu item City (3D) . Setting route type You can set the following route types: R Fast Route : COMAND calculates a route with minimized driving time. R Dynamic Route : COMAND calculates a route with minimized driving time and takes into account traffic messages received along the route. Thus, the navigation[...]

i It is possible to enter a destination regardless of whether route guidance is active or not. The following destination entry options are available: R By address R From the destination memory R From a list of last destinations R From a point on the map R A stopover R A POI Entering a destination by address Introduction i It is not possible to ente[...]

List of states with predictive speller : Top list entry based on the input data up to that point ; Characters entered by the user = Characters automatically added by the system ? Clear last character entry A Currently selectable characters B Currently non-selectable characters C Predictive speller D List of states E Currently selected character i I[...]

X Selecting a state: Slide Z V Æ or rotate c V d . X Canceling selection: Select Back by sliding X V and press W . or X Press back button % in the center console ( Y page 75). X Confirming selection: Press W . The address input menu appears again. It shows the abbreviation for the selected state. The following menu items are now available: R Map :[...]

You can only enter those zip codes/postal codes which are saved on the digital map. The available zip codes/postal codes depend on the state (USA) or province (Canada) currently entered. X In the address input menu, select Zip Code . A list of zip codes/postal codes appears with the predictive speller. List of zip codes/postal codes with predictive[...]

List of zip codes/postal codes without predictive speller X Selecting a zip code/postal code: Slide Z V Æ or rotate c V d . X Canceling selection: Select Back and press W . or X Press back button % in the center console ( Y page 75). X Confirming selection: Press W . You will see the address input menu again. It shows one of the following items of[...]

List of cities with predictive speller : Top list entry based on the input data up to that point ; Characters entered by the user = Characters automatically added by the system ? Predictive speller A Currently non-selectable characters B Currently selectable character C List of cities D Currently selected character i In predictive speller ? , you c[...]

X Selecting a city: Slide Z V Æ or rotate c V d . X Canceling selection: Select Back and press W . or X Press back button % in the center console ( Y page 75). X Confirming selection: Press W . Cities with symbol : are available more than once within the selected state (USA) or province (Canada). Confirming one of these cities will take you to a f[...]

Entering a street i It is not possible to enter a street if you have already entered a city center. i You can only enter streets which are available on the digital map. If you have not entered a city before entering the street, only those streets within the state (USA) or province (Canada) previously entered are available. If you have already enter[...]

X Switching manually to the street list without predictive speller: Slide Z V . or X Select ¬ in the second line from the bottom and press W . Street list without predictive speller : Symbol for more selection options X Selecting a street: Slide Z V Æ or rotate c V d . or X Enter a street number with the telephone keypad using buttons Å - Ã ( Y[...]

uncommon street name. COMAND will then search for cities in which a street with that name exists. X Select or enter a state (USA) ( Y page 94) or province (Canada) ( Y page 96). X Select or enter the street name. Entering a city center i It is not possible to enter a city center if R you have not yet entered a city R you have already entered a stre[...]

List of city centers without predictive speller X Selecting a city center: Slide Z V Æ or rotate c V d . X Canceling selection: Select Back and press W . or X Press back button % in the center console ( Y page 75). X Confirming selection: Press W . After the confirmation, the address input menu appears again. It shows the city center, city and sta[...]

X Selecting numbers: Slide X V Y or rotate c V d . X Confirming number selection: Press W . or X Entering a number with the telephone keypad using buttons Å - Ã ( Y page 70). X Deleting individual numbers: Select F in the bottom line and press W . X Deleting an entire entry: Select F in the bottom line and press W and hold until the entire entry [...]

B Currently selectable character C List of intersections D Currently selected character i In predictive speller ? , you can only select currently selectable characters. Which characters are included depends on the sequence in which you have entered your destination and the digital map. While the characters are being selected as described below, the[...]

R Map : Using the map to enter a destination ( Y page 109) i In this case, using the map for destination entry is based on the city seen in the address input menu. R POI : Entering a point of interest ( Y page 111) i In this case, entering a POI is based on the city seen in the address input menu. R Save : Saving a destination in the destination me[...]

i In predictive speller : , you can only select currently selectable characters. Which characters are included depends on the sequence in which you have entered your destination and the content of the destination memory. While the characters are being selected as described below, the top list entry always shows the destination which best matches to[...]

Entering a destination from the list of last destinations X Select Navi Q Destination Q From Last Destinations . The list of last destinations appears. The most recent destination is at the top of the list. X Select desired destination. X Starting route calculation: Select Start , see also ( Y page 107). Entering a destination from the map i Depend[...]

R Restaurant R Other With the option Other you can enter stopover destinations from the destination memory, last selected destinations, POIs, or via the address ( Y page 110). You can enter stopover destinations on the route or in the vicinity of the route. You can use the stopover function to influence the route guidance calculation to the main de[...]

X Select Navi Q Destination Q Stopover Q Change Stopover . X Enter another destination as a stopover. Deleting the stopover If a stopover has already been entered, you can delete it. X Select Navi Q Destination Q Stopover Q Delete Stopover . COMAND deletes the stopover and calculates the route to the main destination. Displaying stopovers on the ma[...]

X With the menu system displayed ( Y page 89), select Destination Q From POIs Q Destination area . The list of POIs appears. The available POIs in the vicinity of destination are displayed. Entering a POI by name With this function you can enter or select POIs by the name of the POI. X With the menu system displayed ( Y page 89), select Destination[...]

Choosing a main category Example illustration: Main category list for POIs in the surrounding area : Main category ; Symbol for available POIs or other available subcategories X Selecting a main category: Slide Z V Æ or rotate c V d . X Canceling selection: Press back button % in the center console ( Y page 75). X Confirming selection: Press W . M[...]

: Compass heading to the destination ; Linear distance to the destination = Selected destination i Compass : and linear distance ; are not displayed with all search methods. Displays : and ; are static; they do not change while you are driving. In the POI list, you can either select a POI or enter the name of the POI. Selecting a POI X Select desir[...]

X Switching manually to the POI list without predictive speller: Slide Z V . or X Select ¬ in the second line from the bottom and press W . POI list without predictive speller X Selecting a POI: Slide Z V Æ or rotate c V d . X Canceling selection: Press back button % in the center console ( Y page 75). X Confirming selection: Press W . X Starting[...]

Symbol : indicates POIs for which additional information is available. X Select a POI and press W . Example illustration: Hotel with additional information available : Open late (hours vary by section) ; No credit cards accepted = Closed on Sundays ? Key aspects A Ratings B Cost All ratings throughout this guide function are on the Zagat 0 to 30 sc[...]

Examples of displays and announcements for a driving maneuver Driving maneuvers have three phases: R Preparation phase R Announcement phase R Maneuver phase Preparation phase COMAND prepares you for the upcoming driving maneuver. Based on the example display below, the driving maneuver is announced with the Prepare to turn left message. The display[...]

: Graphical representation of the distance to the next driving maneuver ; Information about distance to the next driving maneuver Lane recommendations COMAND can display lane recommendations for upcoming driving maneuvers when driving on selected multilane streets. The respective data must be available on the digital map. : Current vehicle position[...]

Day mode Night mode Recommended lane E = deep blue Recommended lane E = light blue Possible lane D = light blue Possible lane D = deep blue Lane not recommended C : = grey Lane not recommended C : = grey Example of a display without driving maneuvers : Main destination O ; Stopover P (only visible if a stopover has been entered) = Route (highlighte[...]

If the destination is within a partially digitized area COMAND guides you through fully digitized areas for as long as possible. Route guidance is conducted in the usual manner, e.g. with navigation announcements and route guidance displays. Before the vehicle reaches a partially digitized area, COMAND notifies you of this with the following announ[...]

Off-road and off-map Route guidance to an off-road destination G Warning! The COMAND navigation system may direct you to off-road routes that your vehicle may not be capable of traversing through without damaging your tires, wheels or vehicle. It is the driver’s sole responsibility to determine the suitability of the route. Off-road routes may be[...]

The Off Road message and an arrow showing the compass heading to the destination appear on the display. As soon as the system can allocate the vehicle position to the map again, route guidance continues in the usual way. Navigation announcements G Warning! Navigation announcements are intended to direct you while driving without diverting your atte[...]

Displaying info X Select Info in map view with the menu system displayed ( Y page 89). The route information appears. Example illustration: Display with main destination and stopover : Distance/estimated time of arrival/ estimated journey time to the stopover destination ; Stopover destination P = Street, city and state/province ? Main destination [...]

: Current position (city and state/province) ; Next intersection or exit ahead = Previous intersection or exit ? Current street A Current position X Select Navi Q Position Q Where am I? . Compass You can have the current cardinal direction into which the front of the vehicle points displayed. : Current cardinal direction ; Geo coordinates X Select [...]

: Blocked route section ; Current vehicle position; the triangle indicates the vehicle’s direction of travel = Information about the blocked route section i Blocked route section : is always highlighted in red/white. The information about blocked route section = shows which section of the route is blocked and the length of the blocked section. X [...]

Display settings You can select what kind of traffic information is displayed on the map. X Select Navi Q Traffic Symbols on Map X Displaying traffic incidents: Select Incidents . Road sections for which traffic incidents are reported are indicated by yellow symbols and arrows. X Displaying traffic speed and flow: Select Speed & Flow . Road sec[...]

Symbol Description Traffic notifications in map display Traffic report lists Traffic report message Green line with arrows Free-flowing traffic No obstacles for traffic flow. Appears on the free-flow side (direction) of the road. No entry No message Yellow line with arrows Incidents Possible obstacles for traffic flow (e.g. road work). Appears on t[...]

Symbol Description Traffic notifications in map display Traffic report lists Traffic report message Traffic jam (red car) Traffic congestion, average speed 5 – 20 mph (8 – 32 km/h). Could appear repeatedly to indicate length of traffic congestion. (Not possible) (Not possible) XXXX Blocked section Road impassable. Could appear repeatedly to ind[...]

List when route guidance is active Submenu with route guidance active X Displaying a list with traffic messages on the current route: Select Display Messages on Route . X Displaying a list with all traffic messages: Select Display All Messages . X Displaying traffic symbol information: Select Traffic Symbol Info ( Y page 129). After selecting Displ[...]

X Back to list: Select Back . X Displaying previous or next traffic message: Select Previous or Next . X Displaying details for selected traffic message: Select Details . X Switching to map view: Select Map . COMAND navigation system (destination memory) My address i The destination memory always contains an entry called My Address . You can save y[...]

X Enter the address. Proceed as described for destination entry in the “Entering a destination by address” section ( Y page 94). X Select Save after entering the address. Your address is saved. Using the address book entry as your own address X If you want to assign your own address for the first time: Select Assign Address Book Entry . or X If[...]

Destination memory list without predictive speller In the destination memory list without predictive speller, the My Address entry is automatically highlighted. X Press W . If your own address has already been assigned, you will see the menu for starting route guidance with your own address data. X Starting route calculation/guidance: Select Start [...]

Saving a destination from the list of last destinations X Select Navi Q Destination Q From Last Destinations . The list of last destinations appears. X Select desired destination. The address of the destination is displayed. X Select Save . You can now select save options. Selecting save options Saving a destination without a name X Select Save wit[...]

Example illustration: Destination memory list without predictive speller Example illustration: Destination memory list with predictive speller : X Select desired destination. Proceed as described for destination entry in the “Entering a destination from the destination memory” section ( Y page 107). X Select Delete after selecting the destinati[...]

Deleting one of the last destinations X Select Navi Q Destination Q From Last Destinations . The list of last destinations appears. X Select desired destination. The address of the destination appears. X Select Delete . X Select Yes or No . COMAND telephone Safety notes G Warning! Some jurisdictions prohibit the driver from using a cellular telepho[...]

Using the Bluetooth ® interface COMAND provides telephony via the Bluetooth ® interface by connecting a Bluetooth ® -compatible mobile phone. The following functions can be used when a suitable mobile phone is connected to the Bluetooth ® interface: R Hands-free phone operation R Phone book R Reception of electronic business cards (vCards 4 ) i[...]

outgoing call, the No Service message will appear for a short while. R The SIM card is not inserted in GSM type phone. R When you remove the SmartKey from the starter switch during a call in hand-free mode, the call will be maintained for up to 30 minutes. It will then be terminated. Switch to “Private Mode” on the mobile phone before switching[...]

The following conditions must be met for a “911” emergency call via COMAND: R Mobile phone must be switched on. R The corresponding mobile communications network must be available. i Emergency calls may not be possible with all telephone networks or if certain network services and/or telephone functions are active. Check with your local service[...]

1-800-FOR-MERCedes (1-800-367-6372) (in the USA) R call Customer Service at 1-800-387-0100 (in Canada) The battery of the mobile phone should always be charged sufficiently to avoid malfunctions. You should check the following on your mobile phone (see your mobile phone operating instructions) to prepare for telephony via the Bluetooth ® interface[...]

Example illustration: Bluetooth ® phone list : Currently connected # and authorized L mobile phone ; Mobile phone already authorized but not within range ( L appears in grey) = New recognized mobile phone within range, not authorized yet i When the Bluetooth ® phone list is full, you will be prompted to deauthorize a Bluetooth ® device ( Y page [...]

External authorization Certain security settings in your mobile phone may prevent COMAND from finding your mobile phone. In this case, you might want to check if your mobile phone can recognize the COMAND. The Bluetooth ® device name of COMAND is MB Bluetooth . X Select Data/Connections Q Bluetooth Telephones . X Go to Update and select Options Q [...]

: Network status 6 ; Signal strength of mobile phone network Ä 6 = Receiver symbol ¡ (active) or ¢ (inactive) ? COMAND phone book A Call lists B Digits for call number entry C Bluetooth ® name of the currently connected mobile phone Bars ; indicate the current signal strength of the mobile network. When all bars full, reception is best. When al[...]

X Changing the volume: Slide Z V Æ and press W . Making calls G Observe Safety notes, see page 135. Incoming call X Rejecting: Select Reject . or X Press button ~ on the multifunction steering wheel or on the telephone keypad in the center console. X Answering: Select Accept . or X Press button 6 on the multifunction steering wheel or on the telep[...]

X Deleting entire number: Press and hold $ on the telephone keypad in the center console until the number is deleted. or X Select r via the telephone menu and press and hold W until the number is deleted. X Connecting call: Press button 6 on the multifunction steering wheel or on the telephone keypad in the center console. or X Select 6 via the tel[...]

X Select DTMF from the telephone menu during a call. : Sending single digits via the predictive speller ; Sending a phone book entry as a string X Sending single digits: Select the desired digit via predictive speller : . Each selected digit will be sent immediately. You can, for example, save the number for an answering machine in the phone book. [...]

Calling an additional party You can call another party during an active call. The active call is put on hold. X Select NEW from the telephone menu and press W . or X Press button 6 on the telephone keypad in the center console. X Enter the number to call manually ( Y page 143) or from the phone book ( Y page 149). Switching between two parties (cal[...]

be accessed when the respective mobile phone is connected to COMAND via the Bluetooth ® interface. Importing contacts manually i Contacts that were imported manually can always be accessed. Contacts that were imported automatically can only be accessed when the respective mobile phone is connected to COMAND via the Bluetooth ® interface. Data can[...]

¯ Memory card entry G Entry containing multiple phone numbers ; Two-row predictive speller B Changing predictive speller language p Changing character set F Deleting selection ¬ Confirming selection % Back Selecting contacts from list X Phone book: Select Name . X Address book: Select Data/Connections Q Address Book . X Changing from predictive s[...]

: Cursor ; Data field = Two-row predictive speller B Selecting language p Changing character set * / E Selecting upper or lower case % Back F Deleting selection ¬ Confirming selection ? Preset category X Enter data into the data fields. X Entering data into data field: Select the respective characters in predictive speller = . X Moving the cursor:[...]

Via address book X Select Data/Connections . X Open Address Book . X Select contact ( Y page 147). X Press W . X Rotate c V d and press W . or X Select Options Q Call . Starting route guidance to an entry i You can use this function once you have saved a destination to the destination memory ( Y page 107). COMAND will then also save the entire dest[...]

X Select Calls Received or Calls Dialed . The respective list appears. Example illustration: List of numbers you have dialed : Close list ; Phone number and name if available = Options, for example saving X Selecting entry: Slide Z V Æ . X Dialing number: Press button 6 . Incoming calls that you have missed or rejected are indicated by a symbol in[...]

: Data fields for first name, last name, and company ; Number category = Phone category ? The data field for the phone number is filled-out automatically. A Two-row predictive speller X Proceed as described in section “Creating/ editing contacts” ( Y page 148). Adding to an existing address book entry X Open a call list. X Select the list entry[...]

Radio (except Weather Band) Presets (except Weather Band) Channel (only Weather Band) Info FM or AM or WB Sound Save Station Autostore Channel list Program Information Switch to FM wave band Treble Frequency Entry Preset station list Switch to AM wave band Bass Show Station Info Switch to Weather Band Balance/ Fader ª ¥ Radio 3D Sound Switching t[...]

E Preset options F Radio options i Station name display ? is available for the AM/FM wave band and can only be seen when it is switched on ( Y page 156) and if the station transmits a name. HD Radio™ Important Notes i HD Radio™ features include R digital broadcasts in the same wave band as analog AM/FM; the analog AM/FM stations remain at their[...]

system searches upward or downward and stops at the next receivable station/ channel. or X Press and hold button 9 or : on the multifunction steering wheel 18 . Selecting stations using station presets i This function is not available for Weather Band. X Select Audio Q FM/AM Radio Q FM or AM . X Select Presets . or X Press W when the main area is s[...]

X Select channel by rotating c V d or sliding Z V Æ and press W . Saving stations i Twenty stations can be saved in each wave band except for Weather Band. You have the following options: R Saving stations manually R Saving stations using the autostore function Saving stations manually Option 1 X Select Audio Q FM/AM Radio Q FM or AM . X Select Ra[...]

X Switching the station name display on/ off: Select Audio Q FM/AM Radio Q FM Q Radio Q Show Station Info . The station name display : is switched on or off, depending on the previous setting. When the station name display : is switched on, a checkmark appears in front of the Show Station Info menu item. Displaying information You can display progr[...]

Introduction to satellite radio i A subscription to SIRIUS XM Satellite Radio service provider is required for the satellite radio operation described in this section. Contact an authorized Mercedes- Benz Center for details and availability for your vehicle. SIRIUS XM Satellite Radio provides over 130 channels of digital-quality radio, including 10[...]

i It is also possible to activate the satellite radio service online. To do so please visit SIRIUS XM Satellite Radio’s website at www.sirius.com (USA) or www.siriuscanada.ca (Canada). X Closing screen: Press W . Preview channel i If the satellite radio service has not been activated, only the preview channel is available. You cannot tune in anot[...]

Satellite radio channels are split up into categories such as News, Sports, Rock, or Country, if available. X Select Audio Q Sat. Radio Q Category . The category list appears. X Select category by rotating c V d or sliding Z V Æ and press W . When selecting a channel using the channel search function or the channel list, you have access to the cha[...]

Tuning in channels using manual channel number entry i If you try to tune in a channel when the satellite radio service is not activated, you will see the screen described in the section “Satellite radio service is not activated” ( Y page 158). Entering the channel number using the COMAND controller X Select Audio Q Audio Q Sat. Radio Q Sat. Ra[...]

X Selecting a preset position: Slide Z V Æ or rotate c V d . Saving a channel to a selected preset position If you have called up the channel preset screen using option 1: X Press W briefly. In options 2 and 3: X Press and hold W until you hear a signal. The channel is saved. Displaying information X Select Audio Q Sat. Radio Q Info (if available)[...]

reasons, all maintenance work must be carried out by qualified technicians. G Warning! Only carry out the following when the vehicle is stationary: R Inserting a disc/device R Ejecting a disc/device There is a risk of accident by being distracted from road and traffic conditions if you load a disc/device while the vehicle is in motion. Bear in mind[...]

You must observe the following when assigning track names: R Track names must have at least one character. R Track names must have the extension “mp3” or “wma”. R There must be a period between the track name and the extension. Example of a correct track name: Track1.mp3 Compatible file systems and compression methods COMAND supports the fo[...]

i Audio DVDs differ from recordable DVD- R and DVD-RW discs. Data on audio DVDs are stored either in uncompressed format or in lossless compressed format. The sound quality on audio DVDs is therefore better than on recordable DVDs that contain MP3 data because the MP3 format uses a lossy type of compression. You cannot delete data from or record ad[...]

DVD changer The DVD changer contains a built-in magazine with six trays. Magazine tray status: R Indicator lamp on magazine tray button = is off: Magazine tray is empty R Indicator lamp on magazine tray button = is on: Magazine tray is loaded R Indicator lamp on magazine tray button = flashes: Magazine tray ready to be loaded X Loading individual t[...]

X Loading SD card: Push the SD card into slot : . The side with the bevel must point to the right. When the SD card contains MP3 tracks, COMAND will start playback automatically. X Removing SD card: Briefly push on SD card in slot : and release it. X Pull the SD card out. Audio CD/audio DVD/MP3 submenu overview i The components and operating princi[...]

CD, DVD-A, MP3 II/ ¯ / M (audio DVD mode only) REC (audio CD mode only) Search Media Sound ª Show Track Information (MP3 mode only) Albums Track Genres Composers Year Switching to audio CD, audio DVD or MP3 mode X Load CD/DVD ( Y page 165) or SD card ( Y page 166). or X Connect a USB device to the USB socket in the glove box. or X Select Audio Q [...]

Example display in audio DVD mode : Disc type ; Track name = Disc number ? Disc name (only when saved on the disc) A Elapsed track time B Elapsed track time and track number (graphical display) C Sound settings D Current playback option E Medium selection F Track search G Stop function H Pause function I Audio DVD functions Example display in MP3 m[...]

Selecting CD/DVD/MP3 media X Select Audio Q Media . The media list appears. The dot # indicates the currently selected medium. X Select a medium. or X Enter a media number with the telephone keypad using buttons ´ - Å ( Y page 70). Selecting a track Selecting by skipping tracks X Skipping forward or backward: Slide X V Y or rotate c V d . or X Pr[...]

: Source ; Target = Total track length of source files ? Track selection A Starting copy process B Name of source CD and target storage name C Back without copying D Medium position in media list X Selecting audio data: Select Track Select. . The track list appears. X Select All Music Files or select individual tracks. X Select Continue . The copy [...]

When the audio disc does not contain text information, COMAND can recognize unknown audio tracks using the Gracenote ® Media Database. The respective information must be stored in the Gracenote ® Media Database and the function Gracenote Media Database in the CD submenu must be activated. COMAND will then display the accompanying data such as art[...]

The sockets for external audio and video sources (AUX) are located in the glove box. i For operation of the external audio and video sources, refer to the operating instructions of the respective device. You may have to adjust the proper video standard on the external audio and video source to ensure proper replay. Do not leave external devices in [...]

Switching to video AUX operation (COMAND) X Select Video Q AUX . The video AUX menu appears. You will hear and see the medium in the external audio source provided it is connected and set to playback. i For operation of the external video source, refer to the operating instructions of the respective device. You can adjust the following during video[...]

discs which comply with the IEC 60908 standard. You can therefore only use discs with a maximum thickness of 1.3 mm. If you insert thicker discs, e.g. those that contain data on both sides (DVD on one side and audio data on the other), they cannot be ejected and can damage COMAND. Do not use CDs with a diameter of 8 cm. Attempting to play discs wit[...]

number of times you have to press the shortcut button depends on the previously set mode. Showing/hiding the DVD control menu X Showing the menu: Slide Z V Æ . X Hiding the menu: Slide Z V Æ . or X Wait for approximately 8 seconds. Control menu : Disc type ; Current track = Current scene ? Elapsed track time A Show the menu system Showing/hiding [...]

X Continuing playback: Select M . Play is continued from the point at which it was stopped. X Stopping playback: Select ¯ again while playback is stopped. or X Select ¯ twice in quick succession during playback. X Resuming playback: Select M . Playback starts again from the beginning. Pause playback X Select Video Q Video DVD . X Show the menu sy[...]

X Select DVD-V . The DVD-V menu appears. The dot # in front of a menu item - 16:9 Optimized , 4:3 or Widescreen indicates the current format. X Changing the format: Slide Z V Æ or turn c V d , until you reach the desired setting. X Saving the format: Press W . DVD menu The DVD menu is the menu stored on the DVD itself. It is structured in various [...]

or X Select a menu item of your choice from the DVD menu. X Select the menu item Go up in the selection menu. i Depending on the DVD, the menu item Go up or the back button % may only be available in certain DVD menus. On some DVDs, they may have no function at all. Back to the movie X Press back button % until you can see the movie. or X Select th[...]

Music Register G Observe Safety notes, see page 68. You can save MP3 or WMA audio files in the Music Register. The storage capacity is approximately 7 gigabyte. ! Keep your original music files in a safe place. A fault with the COMAND may cause the music files stored in the Music Register to be lost. Mercedes-Benz USA, LLC is not liable for any los[...]

: Media type Music Register ; Track number = Track name ? Elapsed track time A Elapsed track time (graphical display) B Current playback option (no display in “Normal Track Sequence”) C Sound settings D Medium selection E Current folder F Search functions G Medium position in media list H Calling up Music Register menu Copying audio data into t[...]

Starting copy process : Copies from memory card ; Copies to Music Register = Memory requirements, “Calling up memory information” ( Y page 182) ? Starting copy process A Name of source medium and target storage name B Back without copying C Medium position in media list X Select Start . The copying process starts. The status bar shows the copyi[...]

X Select MUSIC REGISTER Q Rename/ Delete Files . or X Press W when the main area is highlighted. The contents of the current folder are displayed. : Back ; Song title = Current folder X Back to previous folder: Select symbol U . The previous folder appears. Renaming folders and tracks X Select Rename/Delete Files . X Selecting folder or track: Slid[...]

For your safety and the safety of others, pull over to a safe location and stop before operating an external audio source. Connections i Always store the devices in a safe place. Only use genuine Mercedes-Benz connector cables. Suitable connector cables are located in the vehicle or can be purchased at any authorized Mercedes-Benz Center. The media[...]

i Do not leave external devices in the vehicle. Proper function of the device could be impaired due to excessive temperatures, for example when exposing to direct sunlight or when the outside temperature is extremely low. Mercedes- Benz does not assume liability for damage to external devices. : 3.5 mm stereo jack AUX cable (4-pin) for connecting e[...]

From another main function X Press shortcut button R . COMAND activates the last selected disc mode. i When media interface operation was selected before, it is now activated. X Select Media Q Media Interface . The media list appears. The dot # indicates the currently played medium. i When no device is connected, Media Interface instead of the devi[...]

track, provided it has been played for longer that 8 seconds. When the track has been played for less than 8 seconds, you will skip to the track before the current one. When you select an option other than Normal Track Sequence , the track is chosen at random. Selecting via telephone keypad X Initiating entry: Press button Ä . The input menu appea[...]

i The menu option Music is not available yet while the device is being activated. Example illustration: Category list : Device symbol and name or selected category ; Available categories X Selecting category/playlist/folder: Slide Z V Æ or rotate c V d and confirm with W . The content of the selected category or folder appears. i The message Pleas[...]

USB storage device i This function is available for alphabetically ordered directories. The function is not available within playlists for example. X Within a folder, press the respective button on the telephone keypad once or more to enter the first character of the desired artist name. For example, press button l three times for an artist whose n[...]

Approach 1: Selecting vehicle functions via the main area of the COMAND display : Menu item Vehicle ; Main area X Select menu item Vehicle : . Main area ; is active. You can select the individual vehicle functions by sliding X V Y or rotating c V d . Approach 2: Selecting vehicle functions via the submenu : Submenu X Select Vehicle Q Vehicle . Subm[...]

To stop seat/steering wheel movement, do one of the following: R Press seat adjustment switch. R Move steering wheel adjustment stalk. R Press one of the memory position buttons or the memory button M . Do not leave children unattended in the vehicle, or with access to an unlocked vehicle. Children could open the driver’s door and unintentionally[...]

Delayed Shut-off : Slide X V Y or rotate c V d and press W . A menu appears. The dot # indicates the currently selected setting. X Selecting setting: Slide Z V Æ or rotate c V d and press W . The dot # indicates the currently selected setting. i The exterior lamp switch must be in position c ( Y page 275) before turning off the engine. Otherwise t[...]

R Parking lamps 25 R Front fog lamps R Door entry lamps in the mirror The locator lighting switches off when the driver’s door is opened. If you do not open a door after unlocking the vehicle with the SmartKey, the lamps will switch off automatically after approximately 40 seconds. X Select Vehicle . The main area is active. X Selecting Locator L[...]

COMAND automatic climate control Introduction i The components and operating principles of COMAND can be found on ( Y page 68). G Warning! Follow the recommended settings for heating and cooling given on the following pages and pages in the “Controls in detail” chapter. Otherwise the windows could fog up, impairing visibility and endangering yo[...]

X Changing temperature: Slide Z V Æ or rotate c V d . X Exiting menu: Press W , back button % in the center console ( Y page 69) or slide X V Y . The setting is saved. Adjusting air distribution G Observe Safety notes, see page 339. You can adjust the air distribution separately for the driver’s and front passenger side. i When you change the ai[...]

X Changing air volume: Slide Z V Æ or rotate c V d . or X Switching back to automatic mode: Rotate c V d and select AUTO . X Exiting menu: Press W , back button % in the center console ( Y page 69) or slide X V Y . The setting is saved. Central climate control menu via COMAND The central climate control menu is in the center of the climate control[...]

X Select climate control settings Q Central climate control menu. X Selecting Mono : Slide Z V Æ or rotate c V d . X Confirming selection: Press W . A checkmark appears when the function has been selected. X Exiting menu: Press back button % in the center console ( Y page 69) or slide X V Y . The Mono function is automatically switched off when yo[...]

X Changing air flow: Slide Z V Æ or rotate c V d . X Confirming selection: Press W . COMAND seats Operating seats via COMAND G Observe Safety notes, see page 264. i The components and operating principles of COMAND can be found on ( Y page 69). The following seat adjustments can be made via COMAND: Settings Lumbar support (CL 550 4MATIC) ( Y page [...]

To support the spine, you can adjust the curvature of the front seat backrests. X Press button T . The main area of the COMAND display is active. A scale appears. : Scale ; Cursor = Current seat ? Current setting X Select seat ( Y page 198). X Adjusting lumbar support: Slide X V Y or rotate c V d until desired setting is reached. X Confirming selec[...]

X Slide Z V Æ or rotate c V d until desired setting is reached. X Saving setting: Press W . Adjusting seat backrest sides This function is used to adjust the air chambers in the seat backrest sides. X Select seat ( Y page 198). X Selecting Seatback Sides : Slide Z V Æ or rotate c V d . X Confirming selection: Press W . A scale appears. X Slide Z [...]

bolsters. This function improves driving comfort and pleasure. X Select seat ( Y page 198). X Selecting Dynamic Seat : Slide X V Y or rotate c V d . X Confirming selection: Press W . A scale appears. You can choose between: R 0 : off R 1 : level 1 (Less lateral support and slow air pressure build-up in the air chambers of the seat backrest side bol[...]

The control system relays information to the multifunction display. Multifunction steering wheel The displays in the multifunction display and the settings in the control system are controlled by using the buttons on the multifunction steering wheel. : Multifunction display ; Press button 6 to answer a call to dial 26 to redial 26 ~ to end a call t[...]

wheel will alter what appears in the multifunction display. The information available in the multifunction display is arranged in menus and accompanying functions. For example, in the Settings menu, you will find functions for making settings to your vehicle. There are functions for calling up information and for making settings to your vehicle. It[...]

Function : Trip menu ( Y page 204) ; Navi menu ( Y page 206) = Audio menu ( Y page 207) ? AMG 28 menu ( Y page 208) A Telephone menu ( Y page 211) B Assistance menu ( Y page 212) C Service menu ( Y page 214) D Settings menu ( Y page 214) Trip menu In the Trip menu, you can show an additional display for the speedometer and call up or reset your veh[...]

Fuel consumption statistics since last reset X Press button = or ; to select the Trip menu. X Press button : or 9 to select From Reset . : Distance driven since last reset ; Time elapsed since last reset = Average speed since last reset ? Average fuel consumption since last reset Resetting values You can reset the values for the following functions[...]

Navi menu The display in the Navi menu depends on whether route guidance is active or not. X Press button = or ; to select the Navi menu. Route guidance not active The multifunction display shows the direction of travel and the name of the street you are currently driving on, if known by the navigation system. : Direction of travel ; Street you are[...]

During a driving maneuver additional lanes may become available on the road or highway. : Lane that opened up during the driving maneuver ; Through lane Navigation status displays in the instrument cluster While route guidance is active, the following messages may be shown in the multifunction display: R O You have reached your destination. R Area [...]

Example illustration for FM radio : Station frequency ; Wave band setting X Selecting next or previous stored station: Press button : or 9 briefly to select a stored station. X Selecting next or previous station in wave band: Press and hold button : or 9 to select a station. You can only change the frequency band and save new stations using the COM[...]

The engine oil temperature will be shown in blue if the engine oil temperature has not yet reached 176‡ (80†). During this time, avoid driving at full engine speed. If the engine reaches the overspeed range in the manual shift program, you will see up next to gear indicator : as a reminder to upshift. Use buttons : or 9 to select the following [...]

: Gear indicator ; RACETIMER = Best lap time Resetting current lap X Press button W while the timer is running. The timer stops. X Press button X . The lap time is reset to “0”. Deleting all laps It is not possible to delete a single saved lap. X Press button W while the timer is running. The timer stops. X Press button X for at least 3 seconds[...]

: Lap number ; Lap time = Maximum speed during lap ? Lap length A Average speed during lap X Press button : or 9 to see other lap analyses. Telephone menu G Warning! A driver’s attention to the road must always be his/her primary focus when driving. For your safety and the safety of others, we recommend that you pull over to a safe location and s[...]

Ending a call or rejecting an incoming call X Press button ~ . Dialing a number from the phone book When your telephone is ready to receive calls, you may select and dial a number from the phone book at any time. X Press button = or ; to select the Telephone menu. X Press button : or 9 or a to switch to the phone book. The stored names are displaye[...]

Failure to observe these guidelines could cause the vehicle to skid. The ESC cannot prevent accidents resulting from excessive speed. For more Information, see ( Y page 59) X Start the engine. X Press button = or ; to select the DriveAssist menu. X Press button : or 9 to select the ESC function X Press button a . X Press button a again if you would[...]

X Press button a again if you would like to change the current status. Depending on the previous status, Blind Spot Assist will be Enabled or Disabled For more information on Blind Spot Assist, see ( Y page 335). Service menu In the Service menu the following functions are available: R Vehicle status message memory ( Y page 214) R Checking tire inf[...]

Switching daytime running lamp mode on or off (USA only) X Press button = or ; to select the Settings menu. X Press button : or 9 to select the Day Running Lamps function. X Press button a . X Press button a again if you would like to change the current status. Depending on the previous status, the Daytime Running Lamps will be switched on ( Enable[...]

The additional speedometer ( Y page 215) will be shown in the other unit. Switching the radar sensors on or off If your vehicle is equipped with DISTRONIC PLUS, BAS PLUS, or Park Assist it is equipped with a radar sensor system which you can switch on and off. When traveling in Canada in a vehicle not registered in Canada, you must switch off the r[...]

Voice Control System introduction Safety notes G Warning! Only use the Voice Control System when road and traffic conditions permit you to do so. Otherwise you could be involved in an accident in which you or others could be injured. G Warning! Please devote your attention first and foremost to the traffic situation you are in. While the system per[...]

You can use the Voice Control System to call up all of COMAND’s main menu items. The commands can be spoken without pausing between the individual words. If an unavailable or incorrect command is used, the Voice Control System will prompt you for a new command by asking “Please repeat” or “Please repeat your entry”. The Voice Control Syst[...]

This does not apply when entering voice names or during the individualization process. or X Press any COMAND button. Setting volume level X Activate the Voice Control System. X Speak a command, for example “Help”. X Press button W or X . The volume is increased or decreased during voice output. or X Set volume for voice output using the COMAND [...]

Navigation operation You can use the Voice Control System to R enter a country, state or province R enter a city R enter a district or a center R enter a street R enter an intersection R enter a house number R enter a zip code R find address R enter a POI (point of interest) R select one of your last destinations R calling up route information R sa[...]

Sample dialog: Enter state. ^ Please say the name of the state. New York. ^ New York accepted. “Enter destination” Use the command “Enter destination” to enter a complete destination address. The system guides you completely through the dialog to route guidance. As soon as a valid address is entered (at least the town), you can use the [...]

Select POIs in your vicinity With following commands you can select POIs in your vicinity: R “Next gas station” R “Next parking lot” R “Next Mercedes-Benz service center” R “Next restaurant” R “Next hospital” Sample dialog: Next gas station. _ The system shows a numbered list of gas stations on the COMAND display. ^ Please sel[...]

Speak the command “Navigate (to)” and the first and last name in any order. This applies to other functions of address book entries also. Sample dialog: Navigate to John Smith. If more than one address exists for this voice name, the Voice Control System will prompt you: ^ Navigate to home or work? Work. ^ John Smith work. Starting route gu[...]

system asks with which entry it is to start. ^ Say the name from which the list should start to read. John Smith. Starting with this name, the system reads all address book entries that include an address. X Press button ? on the multifunction steering wheel briefly when the desired entry is read. When more than one address for the entry exists, [...]

“Enter intersection”, “Enter crossing” Use the command “Enter intersection” or “Enter crossing” to enter an intersection. Sample dialog: Enter intersection. ^ Please say the name of the first street. Forest Drive. ^ Forest Drive accepted. ^ Please say the name of the intersecting street. Dudley Street. ^ Dudley Street accepted[...]

“Telephone” Use the command “Telephone” to activate the telephone main menu. Use this command if you want the digits you are entering to appear on the COMAND display. “Help telephone” The Voice Control System features a comprehensive help function. Use the command “Help telephone” and the Voice Control System will read out an option[...]

“Delete” Using the command “Delete” will erase all digits entered. The system then prompts you to start your input again. Sample dialog: Dial number. ^ Please say the number. One two three four five six seven. ^ One two three four five six seven. Delete. ^ Number deleted. Please say the number again. Four two seven three three nine [...]

^ Which number do you want to dial: Home or work? Work. ^ Smith work. Dialing. “Call <entry>” (address book) Use the command “Call <entry>” to place a phone call by directly selecting a name previously stored in your address book. One address book entry can have different telephone numbers (mobile/car/land line/ pager) for bot[...]

^ Which number do you want to dial: Home or work? Home. ^ Smith home. Dialing. “Dialed calls” The command “Dialed calls” displays the last called phone numbers and to call one of these phone numbers. “Received calls” The command “Received calls” displays the last calls that came in. Managing announcement services or voice mail You[...]

R have the system read the destination memory to you ( Y page 223) R delete the address book R open the address book R open an entry in the address book R have the system read the phone book to you ( Y page 228) X Press button ? on the multifunction steering wheel. X Speak the command “Address book”. X Press button ? on the multifunction steeri[...]

the desired entry contains at least one phone number or one address, the Voice Control System will ask you what you would like to do. You can either dial the phone number or calculate the route to the stored address. “Read out destination memory” For information on “Read out destination memory”, see ( Y page 223). “Delete address book” [...]

The names of all received and stored stations are available for voice recognition. To improve voice recognition, you can store a voice name for a specific speaker. X To select the radio or satellite radio application: Press button ? button on the multifunction steering wheel. X Say the command “Radio” or “Satellite Radio”. X Press button ? [...]

“Save station” Using the “Save station” command you can give a voice name to the station currently selected. You can also use this command to improve voice recognition for difficult names or if you want to use a name of your own. You could, for example, save a station with the name “Favorite station 30 ”. When you have given the command[...]

To select a station: X Press button ? , when the system reads the desired station. X Canceling the dialog: Press button % . The dialog is concluded. The system confirms “Cancel”. “Delete station” You can use the “Delete station” command to delete a voice name for a station from the Presets . Sample dialog: Delete station. ^ Which stat[...]

Operation You can use the Voice Control System to R select a CD/DVD or another medium R select a track R select a folder in MP3 mode R change the category when in media interface mode R select a group in audio DVD mode R select a chapter or scene when in video DVD mode i Upon the command “Next/Previous CD/ DVD”, the DVD changer switches from on[...]

“Track 1” to “Track 99” Use the commands “Track 1” to “Track 99” to select a title number from a loaded medium. “Next track” Use the command “Next track” to select the next track. “Previous track”, “Repeat track” Use the command “Previous track” or “Repeat track” to play again the track you are listening to. [...]

“Media Interface” Use the command “Media Interface” to switch to the media interface in the glove box. “USB” Use the command “USB” to switch to the USB interface in the glove box. Voice Control System command list This section contains an overview of the most important commands for Voice Control System operation. Which commands are [...]

R help voice control system R help linguatronic R general help R 0 - 9 R Letters of the alphabet R continue R go forward R next R next page R go on R back R go back R previous page R last page R help Radio R help HD radio R help Satellite radio R help telephone R help address book R help disc R help CD player R help CD changer R help audio DVD R he[...]

R make a call R I'd like to use the phone R I'd like to telephone R I'd like to make a call R save R store R save number R save telephone number R save name R store number R store telephone number R store name R dial R dial number R dial phone number R dial telephone number R confirm R confirm number R confirm phone number R confirm [...]

R enter destination R enter address R destination entry R destination input R address entry R address input R change destination R change address R start/begin/continue route guidance R start/begin/continue navigation R start/begin/continue nav R start/begin/continue routing R navigation/route/destination guidance on R cancel/exit/stop/quit/abort r[...]

R enter (name of) province R enter another (name of) province R change (name of) province R enter province name R change province name R enter zip code R enter postal code R enter post code R enter (name of) town R enter (name of) city R enter another (name of) town R enter another (name of) city R change (name of) town R change (name of) city R to[...]

R next/nearest/closest Mercedes-Benz service R next/nearest/closest workshop R next/nearest/closest repair shop R next/nearest/closest MB service R next/nearest/closest MB service point R next/nearest/closest MB service center R next/nearest/closest Mercedes service R next/nearest/closest Mercedes service point R next/nearest/closest Mercedes servi[...]

R delete name R erase name R delete <voice name> R erase <voice name> R list/read out/read aloud/play/get/ recall destination memory R list/read out/read aloud/play/get/ recall navigation memory R <voice name> R <voice name> car R <voice name> land line R <voice name> mobile R <voice name> home R <voice [...]

R dial name R dial voice name R save name R save <voice name> R save number R save telephone number R store <voice name> R store number R store telephone number R accept R accept number R accept telephone number R accept name R ok R finished R <1> - <8> R use <1> - <8> R number <1> - <8> R line <1&[...]

R previous/preceding/last/prior station R previous/preceding/last/prior channel R station/channel search coming down R radio info (off/on) Example: 95.5 FM R ninety-five five R ninety-five five megahertz R ninety-five point five R ninety-five point five megahertz R frequency ninety-five five R frequency ninety-five point five R frequency ninety-fiv[...]

R next/other/another/following CD R next/other/another/following disc R next/other/another/following medium R next/other/another/following DVD (audio/video) R next/other/another/following MP3 CD R next/other/another/following MP3 DVD R previous/last/preceding/prior CD R previous/last/preceding/prior disc R previous/last/preceding/prior medium R pre[...]

Media interface R media interface (on) R UCI (on) USB interface R USB R USB interface Aux R audio auxiliary/aux (input) R auxiliary/aux audio (input) R video auxiliary/aux (input) R auxiliary/aux video (input) Voice Control System troubleshooting Help function To support the user, the Voice Control System contains an extensive help function. The he[...]

What to do if ... Problem Possible cause/consequence Suggested solution The Voice Control System does not recognize commands. You have not operated the system from the driver’s seat. X Operate the Voice Control System only by the driver as the microphone is geared to the driver side. You have spoken unclearly, too loudly or too quietly. X Speak t[...]

Problem Possible cause/consequence Suggested solution An address book entry with voice name is not recognized. The voice names do not differ from each other sufficiently. X Make voice names that differ as much as possible. For example, make the names Wight and Wright unique by entering them as “Mr Wight office” and “Mr Wright John”. or X Sp[...]

Problem Possible cause/consequence Suggested solution You want to enter a city, street or city center but you have to spell the entry. Entering part of an address has failed after several attempts, e.g. due to background noise, or you have tried to enter an address in Puerto Rico ( Y page 220). X Spell the entry. You have entered a phone number as [...]

Vehicle equipment ............................ 252 Locking and unlocking ..................... 252 Starter switch positions ................... 262 Seats .................................................. 264 Multifunction steering wheel .......... 270 Mirrors ............................................... 271 Memory function .....................[...]

Vehicle equipment i This Operator’s Manual describes all features, standard or optional, potentially available for your vehicle at the time of purchase. Please be aware that your vehicle might not be equipped with all features described in this manual. Locking and unlocking Notes G Observe Safety notes, see page 51. When unlocking or locking the [...]

i USA only: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. this device must accept any interference received, including interference that may cause undesired operation. Any unauthorized modification to this device could void the user[...]

i USA only: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. this device must accept any interference received, including interference that may cause undesired operation. Any unauthorized modification to this device could void the user[...]

R The vehicle could be inadvertently unlocked if the SmartKey is within 3 ft (1 m) of the vehicle and - an outside door handle is splashed with water or - you attempt to clean an outside door handle R Remember that the engine can be started by anyone with a SmartKey that is left inside the vehicle. Possibility 1 (One SmartKey in the vehicle, one Sm[...]

i You can obtain the required batteries at any authorized Mercedes-Benz Center. i If the batteries are checked within signal range of the vehicle, pressing button & or % will lock or unlock the vehicle accordingly. Loss of the SmartKey If you lose your SmartKey or mechanical key, you should do the following: X Have the SmartKey deactivated by a[...]

Fix whatever is affecting the window before trying to shut the door. Automatic central locking You can switch the automatic central locking on or off using the COMAND system ( Y page 193). The doors and the trunk lock automatically when the vehicle is set into motion. You can open a locked door from the inside. Open door only when conditions are sa[...]

You can open the trunk when the vehicle is stationary. A minimum height clearance of 5.9 ft (1.80 m) is required to open the trunk lid. Opening the trunk from the outside X Press and hold button F ( Y page 252) on the SmartKey until the trunk unlocks and begins to open. or X Pull on handle : . In vehicles without KEYLESS-GO: The vehicle must be unl[...]

Closing the trunk from the outside manually X Lower trunk lid by pulling firmly on handle : . X Close trunk with hands placed flat on trunk lid. The power closing assist automatically ensures that the trunk lid is pulled completely close ( Y page 261). Closing the trunk from the inside automatically G Warning! Maintain sight of the area around the [...]

operated. Therefore, do not leave children unattended in the vehicle, or with access to an unlocked vehicle. A child’s unsupervised access to a vehicle could result in an accident and/or serious personal injury. Vehicles without KEYLESS-GO Vehicles with KEYLESS-GO X Press trunk closing switch : briefly. If the trunk lid comes into contact with an[...]

X Briefly press emergency release button : . The emergency release button unlocks and opens the trunk while the vehicle is standing still or in motion. Illumination of the emergency release button: R The button flashes for 30 minutes after opening the trunk. R The button flashes for 60 minutes after closing the trunk. The emergency release button d[...]

G Warning! Only drive with the doors closed. Otherwise, one or more of the doors could open while the vehicle is in motion, putting you and/or others at risk. G Warning! Make sure the trunk is closed when the engine is running and while driving. Among other dangers, deadly carbon monoxide (CO) gases may enter vehicle interior resulting in unconscio[...]

then insert the SmartKey into the starter switch. i The KEYLESS-GO start/stop button does not need to be removed from the starter switch when you leave the vehicle. However, always take the SmartKey with you when you leave the vehicle. As long as the SmartKey is in the vehicle, the vehicle’s electrical systems can be switched on or the engine can[...]

i When you now press the KEYLESS-GO start/stop button once and the driver’s door is open, the power supply is switched off. Seats Safety notes G Warning! In order to avoid possible loss of vehicle control the following must be done before the vehicle is put into motion: R seat adjustment R head restraint adjustment R steering wheel adjustment R r[...]

or the child is not properly secured in the child restraint. G Warning! For your protection, drive only with properly positioned head restraints. Adjust the head restraint so that it is as close to the head as possible and the center of the head restraint supports the back of the head at eye level. This will reduce the potential for injury to the h[...]

! Do not move the front passenger seat completely forward if objects are stored in the parcel net in the front passenger-side footwell. Items in the net may be damaged. You can adjust the front passenger seat using the seat switches on the driver’s side. X Press button : . When the indicator lamp in button : is on, you can operate the following f[...]

against an occupant or object. The seat will slide forward and stop. Investigate and correct the cause of interruption. Now use memory button or seat adjustment switch to bring the seat into the desired position. When folding the seat backrest forward from a reclined position, and then folding it back, the seat backrest stops in a more upright posi[...]

i For safety reasons, the driver’s seat will not return to its last set position if the system recognizes the last set position as an extreme forward position. Instead, the driver’s seat will remain at or move to a factory-set maximum forward position. To again fully return the driver’s seat to your last set position or to memory position, ad[...]

X Switch on the ignition. X Press head restraint release switch : in the front center console briefly. The head restraints will fold backward. Placing rear seat head restraints upright i When fasten a rear seat belt, the respective rear seat head restraint places upright automatically. X Switch on the ignition. X Press and hold head restraint relea[...]

The seat heating switches from level 2 to level 1 (low) after approximately 10 minutes. After approximately 20 minutes in level 1 , the seat heating switches off automatically. X Switch on the ignition. X Switching on: Press respective seat heating button : repeatedly until the desired heating level is set. One or more red indicator lamps in respec[...]

i The steering wheel heating will not switch on, when the temperature of the vehicle interior is above 86‡ (30†). X Switching off: Turn switch at the tip of stalk in direction of arrow ; . Indicator lamp = goes out. i Indicator lamp = flashes or goes out in case of power surge or undervoltage or if the steering wheel heating malfunctions. i The[...]

i At low ambient temperatures, the exterior rear view mirrors will be heated automatically. Auto-dimming rear view mirrors The exterior rear view mirror on the driver’s side and the interior rear view mirror will respond automatically to glare when the ignition is switched on and incoming light from headlamps falls on the sensor in the interior r[...]

Calling up the parking position X Switch on the ignition. X Press button = , to select the passenger- side exterior rear view mirror. X Shift the automatic transmission into reverse gear R . The passenger-side exterior rear view mirror moves to the stored parking position. The passenger-side exterior rear view mirror returns to its previously store[...]

Each memory position button on the driver’s side can store all of the following settings: R Seat position R Lumbar support (CL 550 4MATIC) R Multicontour seat: previously saved settings R Drive-dynamic multicontour seat: activation/deactivation R Steering wheel position R Exterior rear view mirrors’ position G Warning! Do not activate the memor[...]

Exterior lamp switch 1 W Standing lamps, left 2 X Standing lamps, right 3 $ Off Daytime running lamp mode 4 c Automatic headlamp mode Daytime running lamp mode 5 T Parking lamps (also tail lamps, license plate lamps, side marker lamps and instrument panel lamps) 6 L Low-beam headlamps or high-beam headlamps 7 N Front fog lamps 8 R Rear fog lamp i T[...]

ambient lighting conditions require you to do so. In low ambient lighting conditions, only switch from position c to L with the vehicle at a standstill in a safe location. Switching from c to L will briefly switch off the headlamps. Doing so while driving in low ambient lighting conditions may result in an accident. The automatic headlamp feature i[...]

USA only You can only switch on the high-beam headlamps in low ambient lighting conditions. The high-beam flasher is available at all times. When the engine is running, and you turn the exterior lamp switch to position T or L , the manual headlamp mode has priority over the daytime running lamp mode. The corresponding exterior lamps come on ( Y pag[...]

High beam X Turn the exterior lamp switch to position L ( Y page 275). X Switching on: Push the combination switch in direction of arrow : . The high-beam headlamp indicator lamp K in the instrument cluster comes on. X Switching off: Pull the combination switch in direction of arrow = to its original position. i Also note the information on high-be[...]

If you are driving faster than 25 mph (40 km/h) the corner-illuminating function is not available. Switching on X Make sure the engine is running. X Turn the exterior lamp switch to position L or c ( Y page 275). or X Activate the daytime running lamp mode ( Y page 276). X Switch on the left or right turn signal, depending on whether you are turnin[...]

R unlock the vehicle R remove the SmartKey from the starter switch ( Interior Lighting Delayed Switch-off must be switched on ( Y page 191)) R open a door The interior lighting goes out after a short time ( Y page 191). i If a door remains open, the interior lamps go out automatically after approximately 5 minutes. X Deactivating: Press button ~ . [...]

5 ¯ Fast continuous wiping B í Single wipe/ î Wiping with washer fluid X Switch on the ignition. X Turn the combination switch to the desired position, depending on the intensity of the rain. i When the windshield wipers are switched on and you stop the vehicle, the wipers operate more slowly. Intermittent wiping Only switch on intermittent wipi[...]

R Turn off the engine by pressing the KEYLESS-GO start/stop button and open the driver’s door (with the driver’s door open, starter switch is in position 0 , same as with SmartKey removed from starter switch). R Engage the parking brake. R Remove blockage. R Turn the windshield wipers on again. If the windshield wipers fail to function at all w[...]

X Switch on the ignition. X Opening/closing: Press or pull and hold switch : to ? to the resistance point. The corresponding window moves downward or upward until you release the switch. X Express operation: Press or pull switch : or ; past the resistance point and release. The corresponding door window opens or closes completely. X Express opening[...]

The summer opening feature can only be activated via the remote control of the SmartKey. The SmartKey must be in close proximity to the driver’s outside door handle. X Aim the transmitter eye of the SmartKey at the driver’s outside door handle. X Press and hold button % on the SmartKey until the windows and the tilt/ sliding sunroof have reache[...]

Driving and parking Safety notes G Warning! Make sure absolutely no objects are obstructing the pedals’ range of movement. Keep the driver’s footwell clear of all obstacles. If there are any floormats or carpets in the footwell, make sure the pedals still have sufficient clearance. During sudden driving or braking maneuvers the objects could ge[...]

or with access to an unlocked vehicle. A child’s unsupervised access to a vehicle could result in an accident and/or serious personal injury. You can start your vehicle without the SmartKey in the starter switch using the KEYLESS-GO start/stop button. The SmartKey must be located in the vehicle. KEYLESS-GO start/stop button : USA only ; Canada on[...]

Driving off G Warning! On slippery road surfaces, never downshift in order to obtain braking action. This could result in drive wheel slip and reduced vehicle control. Your vehicle’s ABS will not prevent this type of loss of control. ! Do not run a cold engine at high engine speeds. Running a cold engine at high engine speeds may shorten the serv[...]

The red indicator lamp F (USA only) or ! (Canada only) in the instrument cluster goes out. After a cold start, the automatic transmission shifts at a higher engine speed. This allows the catalytic converter to reach its operating temperature earlier. For more information on driving, see “Driving instructions” ( Y page 397). Problems while drivi[...]

children unattended in the vehicle, or with access to an unlocked vehicle. Children could release the electronic parking brake and/or shift the automatic transmission out of park position P , either of which could result in an accident and/or serious personal injury. Releasing electronic parking brake manually X Switch on the ignition. X Pull handl[...]

Emergency braking with electronic parking brake In an emergency situation, you can also brake your vehicle by using the electronic parking brake. X While driving, press handle : . All four wheels of the vehicle will be braked for as long as you press and hold the handle for the electronic parking brake. The longer you keep the handle pressed, the s[...]

Otherwise the vehicle could roll away which could result in an accident and/or serious personal injury. i In an emergency you can turn off the engine while driving by pressing and holding the KEYLESS-GO start/stop button for approximately 3 seconds. If you have started the engine with the KEYLESS-GO start/stop button and cannot turn it off as descr[...]

! The vehicle must be stopped when you shift the automatic transmission R directly between drive position D and reverse gear R R directly between reverse gear R and drive position D R directly into park position P Otherwise the automatic transmission could be damaged. When trying to free a vehicle stuck in mud or snow, see “Rocking the vehicle”[...]

the vehicle through an automatic conveyor- type car wash, observe the following instructions. G Warning! When leaving the SmartKey in the starter switch, do not leave children unattended in the vehicle. It is possible for children to switch on the ignition which could result in unsupervised use of vehicle equipment. Unsupervised use of vehicle equi[...]

Transmission positions The current transmission position appears in the multifunction display. : Transmission position indicator If the current transmission position does not appear in the multifunction display due to a malfunction, for example, make sure that the automatic transmission is in the desired position. X Shift the automatic transmission[...]

Effect A Neutral position No power is transmitted from the engine to the drive axle. When the brakes are released, the vehicle can be moved freely (pushed or towed). To avoid damage to the transmission, never shift the automatic transmission into neutral position N while driving. Exception: If the ESC is switched off or malfunctioning, shift the au[...]

Effect = With this selection you can use the braking effect of the engine. 5 Allows the use of the engine’s braking effect when driving R on steep downgrades R in mountainous regions R under extreme operating conditions 4 For maximum use of the engine’s braking effect on very steep or lengthy downgrades. Automatic shift program The program mode[...]

Selecting program mode C means: R The vehicle starts out more gentle, both forward and reverse, except when driving off with full throttle. R Traction and driving stability are improved on icy roads. R Upshifts occur earlier even when you give more gas. The engine then operates at lower revolutions and the wheels are less likely to spin. Selecting [...]

Shifting into optimal gear range X Pull and hold left gearshift control : . The automatic transmission will select the gear range suited for optimal acceleration and deceleration automatically. This will involve shifting down one or more gears. Manual shift program The manual shift program is available on AMG vehicles only. Manual program mode M di[...]

In manual program mode M , upshift indicator ; in the multifunction display advises you to upshift before the engine reaches the overspeed range. Thus you can drive at the maximum engine speed for each gear without overrevving the engine. X Shift the automatic transmission from current gear : into the next higher gear. The fuel supply will otherwis[...]

otherwise seriously damage the brake system or the transfer case which is not covered by the Mercedes-Benz Limited Warranty. ! Because the ESC operates automatically, the engine and ignition must be shut off (SmartKey in starter switch position 0 or 1 or KEYLESS-GO start/stop button in position 0 or 1 ) when the electronic parking brake is being te[...]

Steam from an overheated engine can cause serious burns which can occur just by opening the engine hood. Stay away from the engine if you see or hear steam coming from it. Stop the vehicle in a safe location away from other traffic. Turn off the engine, get out of the vehicle and do not stand near the vehicle until the engine has cooled down. Durin[...]

Cruise control The cruise control maintains the speed you set for your vehicle automatically. The use of the cruise control is recommended for driving at a constant speed for extended periods of time. The currently set speed or last set speed (“Resume” function) appears in the multifunction display for approximately 5 seconds. The set speed is [...]

The vehicle speed displayed in the speedometer can briefly vary from the speed setting for the cruise control system. Setting current speed X Accelerate or decelerate to the desired speed. X Briefly lift the cruise control lever in direction of arrow : or press in direction of arrow ; . X Remove your foot from the accelerator pedal. i On uphill gra[...]

X Increasing: Briefly lift the cruise control lever up to the resistance point in direction of arrow : . X Decreasing: Briefly press the cruise control lever down to the resistance point in direction of arrow ; . X Release the cruise control lever. The new speed is set and the vehicle will accelerate or decelerate. Adjustment in 5 mph (Canada: 10 k[...]

G Warning! When the DISTRONIC PLUS is braking, the brake pedal is retracted (i.e. depressed automatically). The pedals’ range of motion must not be impeded by any obstacles: R Do not place any objects in the footwell. R Make sure that the floormats and carpets are securely in place. R Do not rest your foot underneath the brake pedal, as it could [...]

switched on. Otherwise, you may not be able to recognize dangerous situations until it is too late. This could cause an accident in which you and/or others could be injured. G Warning! The “Resume” function should only be operated if the driver is fully aware of the previously set speed and wishes to resume this particular preset speed. G Warni[...]

i Canada only: This device complies with RSS-210 of Industry Canada. Operation is subject to the following two conditions: 1. This device may not cause interference, and 2. this device must accept any interference received, including interference that may cause undesired operation of the device. Removal, tampering, or altering of the device will vo[...]

You must also apply the brakes yourself to avoid a collision. The DISTRONIC PLUS brakes the vehicle in an effort to restore the preset distance or to maintain the set speed. The brake pedal is automatically applied as this happens which results in the brake pedal moving Keep driver’s foot area clear at all times, including the area under the brak[...]

: Preceding vehicle, if detected ; Actual distance to the preceding vehicle = Preset distance threshold to the preceding vehicle ? Your vehicle DISTRONIC PLUS lever : Setting current or higher speed ; Setting current or lower speed = Deactivating the DISTRONIC PLUS ? Activating the DISTRONIC PLUS or resuming to the last set speed A Setting followin[...]

vehicle has been detected and is shown in the multifunction display. If you no longer see the preceding vehicle in the multifunction display and if it is no longer detected because it has changed lanes, for example, the DISTRONIC PLUS switches off and a signal sounds. X Pull the DISTRONIC PLUS lever briefly in direction of arrow ? to call up the la[...]

Stopping G Warning! The braking effect of the DISTRONIC PLUS is canceled and the vehicle can start to roll if R the DISTRONIC PLUS is switched off using the DISTRONIC PLUS lever R you accelerate R the DISTRONIC PLUS system or the power supply is malfunctioning, e.g. due to battery failure R the electrical components in the engine compartment or the[...]

You can increase or decrease the set speed in 1 mph (Canada: 1 km/h) increments or in 5 mph (Canada: 10 km/h) increments. When you use the DISTRONIC PLUS lever to decelerate, the brake system will brake the vehicle automatically if the engine’s braking power does not brake the vehicle sufficiently. Adjustment in 1 mph (Canada: 1 km/h) increments [...]

R the radar sensors are switched off R you pull the DISTRONIC PLUS lever in direction of arrow ? ( Y page 309) for driving off and the front passenger or a rear passenger door is open The marker for the set speed on the speedometer dial go out, an acoustic signal sounds, and the message DISTRONIC PLUS Off appears in the multifunction display for ap[...]

The DISTRONIC PLUS regulates only the distance between your vehicle and those directly ahead of it. It may not register stationary objects in the road, e.g.: R a stopped vehicle in a traffic jam R a disabled vehicle R an oncoming vehicle The driver must always be alert, observe all traffic and intercede as required by means of steering or braking t[...]

The DISTRONIC PLUS has not yet detected the vehicle changing lanes. There will be insufficient distance to the lane-changing vehicle. Narrow vehicles Because of their narrow profile, the vehicles traveling near the outer edges of the lane have not yet been detected by the DISTRONIC PLUS. There will be insufficient distance to the preceding vehicles[...]

HOLD function The HOLD function can assist you R when driving off, especially on steep slopes R when maneuvering on steep slopes R when waiting in traffic The vehicle is kept stationary without the driver having to depress the brake pedal. Upon depressing the accelerator pedal, the braking effect is canceled and the HOLD function is deactivated. Ac[...]

G Warning! The braking effect of the HOLD function is canceled and the vehicle can start to roll if R the HOLD function is deactivated by depressing the accelerator pedal or the brake pedal R the HOLD function or the power supply is malfunctioning, e.g. due to battery failure R the electrical components in the engine compartment or the fuses have b[...]

X If indicator lamp ; is not lit: Press ADS switch : . Indicator lamp ; comes on. The sport driving mode with a firmer suspension tuning is selected. The message AIRMATIC SPORT appears in the multifunction display. Comfort damping adjustment Vehicle handling in comfort driving mode is softer. Select this mode when you prefer a more comfortable driv[...]

message disappears when the vehicle is raised. Indicator lamp ; is then lit. When the vehicle is in raised level, pressing vehicle level control switch : will return the vehicle to normal level. The vehicle is lowered to the normal level automatically when R the vehicle speed is above 75 mph (120 km/h) R the vehicle speed stays between 50 mph (80 k[...]

The following vehicle level settings can be selected when the vehicle is stationary and the engine is running: Level Use for Indicator lamp Normal For driving on normal roads. The indicator lamp is off. Raised For driving on rough roads or with snow chains ( Y page 396). The indicator lamp is on. Select the “Raised” level setting only when requ[...]

Comfort suspension tuning Vehicle handling in comfort driving mode is softer. Select this mode when you prefer a more comfortable driving style. X When indicator lamp ; is on: Press button : . Indicator lamp ; goes out. The comfortable chassis and suspension setup is selected. The message ABC Active Body Control COMFORT appears in the multifunction[...]

in the front bumper and four sensors in the rear bumper. Example illustration, sensors in the front bumper To function properly, sensors : must be free of dirt, ice, snow and slush. Clean sensors : regularly. Be careful not to scratch or damage sensors : , see “Cleaning the driving systems sensors” ( Y page 406). G Warning! The Parktronic is a [...]

signal. If the obstacle is closer than the minimum distance, the actual distance may no longer be indicated by the Parktronic system. Warning indicators Visual signals indicate the relative distance between the sensors and an obstacle. Front area warning indicators Rear area warning indicators Each warning indicator is divided into five yellow and [...]

X Switching off: Press Parktronic switch : . Indicator lamp ; comes on. X Switching on: Press Parktronic switch : again. Parktronic system malfunction There is a malfunction in the Parktronic system, if only the red distance segments illuminate and an acoustic warning sounds. The Parktronic system will switch off automatically after 20 seconds and [...]

permitted. Do not tamper with, alter, or use in any non-approved way. Any unauthorized modification to this device could void the user’s authority to operate the equipment. When traveling in Canada in a vehicle not registered in Canada, you must switch off the radar sensor system ( Y page 216). Canadian law does not permit the use of the radar se[...]

i The sensors have a broad detection range. Therefore, the Park Assist may also issue warnings due to detected obstacles on the ground, for example: R Sewer canal covers R Rails R Bumps R Gutters Warnings may also be issued due to obstacles that are moving up quickly, for example rolling garage doors. Front sensors Center approx. 40 in (100 cm) Cor[...]

Once the second red distance segment illuminates, you will hear a continuous warning tone. You have reached the minimum distance. The signal is canceled when the automatic transmission is in park position P or neutral position N with the electronic parking brake engaged. Rear area: As soon as the first red distance segment illuminates, you will hea[...]

initially measured when driving past. Subsequent changes to the parking space are not taken into account, e.g. if the position of the vehicle parked in front of or behind the space changes or objects in the parking space are moved. Moving objects are not shown, e.g. pedestrians or vehicles driving past. The Advanced Parking Guidance does not reliev[...]

Parking instructions: R On narrow streets, drive by the parking space as close as possible. R Parking spaces that are dirty, overgrown or located in front of trailers may not be detected correctly. R Snowfall or heavy rain may cause imprecise measurement of the parking space. R Also observe the Park Assist warning indicator ( Y page 326) while the [...]

Parking The following describes the parallel parking process on the passenger side. Parallel parking on the driver’s side is performed reversed left to right. If the Advanced Parking Guidance detects an obstacle behind the vehicle during the parking procedure, you will hear an audible warning. Stop the vehicle immediately. The parking space and t[...]

Driving into the parking space Green lane : indicates the correct steering wheel position. X Maintain the steering wheel position and carefully back up. X Stop as soon as you hear the audible warning. The vehicle has reached the position for countersteering. Countersteering X When the vehicle is stationary, turn the steering wheel until red lane : [...]

Canceling the Advanced Parking Guidance X Press the Park Assist button ( Y page 327). The Advanced Parking Guidance is canceled immediately and the Park Assist is deactivated. The Advanced Parking Guidance is canceled automatically if guidance into the parking space is no longer possible or if an error occurs. The parking space symbol disappears an[...]

Camera lens : must be free of dirt, ice, snow, and slush to function properly. Clean the camera lens regularly. Being careful not to scratch or damage the camera lens, see “Cleaning the rear view camera lens” ( Y page 407). Switching on or off X Switching on: Switch on the ignition. X Switch on the COMAND system. X Shift the automatic transmiss[...]

look through the windshield. You are always responsible for safety and must drive in accordance with traffic conditions. Otherwise, you could endanger yourself and others. The system may be impaired or unavailable when R visibility is poor, e.g. due to snow, rain, fog, or heavy spray R the camera area of the windshield is dirty, fogged up or covere[...]

buttons, you must first switch off the Night View Assist. : Night View Assist image ; Speedometer dial Adjusting instrument cluster illumination If you change the brightness of the instrument cluster while the Night View Assist is switched on, only the brightness of the multifunction display is changed. X Make sure the Night View Assist is switched[...]

G Warning! The Blind Spot Assist is only a driving aid and may not detect all vehicles. The Blind Spot Assist may not be able to detect narrow vehicles such as motorcycles or bicycles, or it may not detect them until it is too late. The monitoring function may be impaired if your sensors are dirty, subject to heavy spray, or if visibility is poor d[...]

G Warning! The Blind Spot Assist monitors certain areas in the immediate vicinity of your vehicle. Vehicles approaching and passing at speeds that exceed the speed of your vehicle significantly will not be detected. There will be no warning display and no audible warning. When driving in a very wide lane, the sensors may not be able to cover the en[...]

The brightness of indicator lamps/warning lamps : is controlled automatically depending on the brightness of the ambient light. G Warning! The Blind Spot Assist is not active at speeds below approximately 20 mph (30 km/h). The yellow indicator lamps in the exterior rear view mirrors are illuminated. You will not be alerted to the presence of vehicl[...]

Function Recommendation/Notes 3 Manual fan speed adjustment, driver’s side ( Y page 342) 4 Front defroster i Keep this setting selected only until the windshield or the side windows are clear again. ( Y page 343) 5 Air recirculation i Only use this function for a short time, e.g. in a tunnel. Otherwise, the windows can fog up due to lack of fresh[...]

Nearly all dust particles, pollutants and odors are filtered out before outside air enters the passenger compartment through the air distribution system. G Warning! Severe conditions (e.g. strong air pollution) may require replacement of the filter before its scheduled replacement interval. A clogged filter will reduce the air volume to the interio[...]

The cooling function can be activated or deactivated via COMAND ( Y page 196). Automatic mode When operating the climate control system in automatic mode, the interior air temperature, air volume and air distribution are adjusted automatically. In automatic mode, cooling with dehumidification is switched on. This function can be switched off if nec[...]

i For draft-free ventilation, move the adjustable center and side air vents to the middle position. Center air vents : Cockpit air vent, fixed ; Right center air vent, adjustable = Thumbwheel for air volume control for adjustable right center air vent ? Thumbwheel for air volume control for adjustable left center air vent A Left center air vent, ad[...]

Front defroster You can use this setting to defrost the windshield, for example if it is iced up. You can also defog the windshield and the door windows. i Keep this setting selected only until the windshield or the door windows are clear again. Activating X Press rocker switch ¬ up or down. The indicator lamp in the rocker switch comes on. The cl[...]

G Warning! Fogged windows impair visibility, endangering you and others. If the windows begin to fog on the inside, switching off the air recirculation mode immediately should clear interior window fogging. If interior window fogging persists, make sure the air conditioning is activated, or press button ¬ . X Activating: Press rocker switch g up o[...]

The rear window defroster uses a large amount of power. To keep the battery drain to a minimum, switch off the defroster as soon as the rear window is clear. The defroster is switched off automatically after approximately 6 to 17 minutes of operation depending on the outside temperature. X Switch on the ignition. X Switching on: Press rocker switch[...]

sunroof until you open the driver’s or passenger door. If no door was opened you can operate the tilt/sliding sunroof for up to 5 minutes. Sunroof switch : Raising ; Opening = Closing With the sunroof closed or raised, you can slide the sunroof screen forward and back. X Switch on the ignition. Opening X Opening manually: Press and hold the sunro[...]

If the movement of the tilt/sliding sunroof is blocked during the closing procedure (e.g. by ice or pollution), the tilt/sliding sunroof will stop and open slightly. X Immediately after the tilt/sliding sunroof has stopped and opened because it was blocked, pull and hold the sunroof switch in direction of arrow = until the tilt/sliding sunroof is f[...]

load the vehicle accordingly with the heaviest items being placed towards the front of the vehicle. Please pay attention to and comply with the following instructions when loading the vehicle and transporting cargo: R Always place items being carried against front or rear seat backrests, and fasten them as securely as possible. R The heaviest porti[...]

X Closing: Push the glove box lid upwards until it engages. You can lock the glove box, e.g. when the vehicle is in the shop for service. The glove box can only be locked or unlocked with the mechanical key. 1 Glove box unlocked 2 Glove box locked Eyeglasses compartment X Opening: Press eyeglasses compartment mark : . X Closing: Guide eyeglasses co[...]

X Opening: Pull release catch : and swing the storage compartment cover upward in direction of arrow. Rear seat storage compartment X Opening: Pull handle : backward in the direction of arrow. Rear storage box X Fold the rear armrest down. ! Do not sit on or lean your body weight against the armrest when it is folded down, as you could otherwise da[...]

during braking, vehicle maneuvers, or in an accident. Liquids spilled on vehicle occupants may cause serious personal injury. Liquids spilled on vehicle equipment may cause damage not covered by the Mercedes-Benz Limited Warranty. When not in use, keep the cup holder closed. An open cup holder may cause injury to you or others when contacted during[...]

= Holder, e.g. for gas cards ? Vanity mirror A Vanity mirror cover Glare through the windshield X Flip sun visor down when you experience glare. Glare through a door window X Close vanity mirror cover A if opened. X Disengage sun visor from mounting ; . X Pivot sun visor to the side. Vanity mirror The vanity mirror lamp only functions when the sun [...]

Cigarette lighter G Observe Safety notes, see page 51. G Warning! Never touch the heating element or sides of the lighter; they are extremely hot. Hold the knob only. Make sure any children traveling with you do not injure themselves or start a fire with the hot cigarette lighter. If the engine is off and the cigarette lighter is being used extensi[...]

Shortly after the completion of your Tele Aid acquaintance call, you will receive a user ID and password in the mail. You may use this password to access the Tele Aid section in “Owner’s Online” at www.mbusa.com (USA only). The “My Tele Aid” section will give you access to account information, remote door unlock and more. The Tele Aid sys[...]

button E to perform the acquaintance call. Failure to complete either of these steps may result in a system that is not activated. If you have any questions regarding activation, please call the Customer Assistance Center at 1-800-FOR-MERCedes (1-800-367-6372) (USA only) or 1-888-923-8367 (Canada only). An emergency call is initiated automatically [...]

X Wait for a voice connection to the Customer Assistance Center. X Close cover ; after the emergency call is concluded. G Warning! If you feel at any way in jeopardy when in the vehicle (e.g. smoke or fire in the vehicle, vehicle in a dangerous road location), please do not wait for voice contact after you have pressed the emergency button. Careful[...]

phone network is not available). The message Call Failed appears in the multifunction display. Call could not be connected! appears in the COMAND display. Confirm the message pressing W ( Y page 71). X Terminating calls: Press button ~ on the multifunction steering wheel. or X Press the respective button for ending a telephone call on the telephone[...]

representative. All other calls can be terminated by pressing button ~ on the multifunction steering wheel or the respective button for ending a telephone call on the telephone keypad. Destination Download to the COMAND system i The components and operating principles of the COMAND system can be found on ( Y page 69). Destination Download allows yo[...]

i Destination addresses will download in the same order they were sent. If you have multiple Mercedes-Benz vehicles equipped with Tele Aid and active accounts, each destination address sent will be retrievable by all vehicles associated with the e-mail address you specified for your Tele Aid account. Remote door unlock In case you have locked your [...]

Stolen Vehicle Recovery Services In the event your vehicle was stolen: X Report the incident to the police. The police will issue a numbered incident report. X Pass this number on to the Customer Assistance Center along with your password. The Customer Assistance Center will then attempt to covertly contact the vehicle’s Tele Aid system. Once the[...]

transmitter buttons, do not repeat this step and begin directly with step 3. X Step 3: Hold the end of hand-held remote control A of the device you wish to train approximately 2 to 12 in (5 to 30 cm) away from the signal transmitter button ( ; , = or ? ) to be programmed, while keeping indicator lamp : in view. X Step 4: Using both hands, simultane[...]

Gate operator/Canadian programming Canadian radio-frequency laws require transmitter signals to “time-out” (or quit) after several seconds of transmission which may not be long enough for the integrated signal transmitter to pick up the signal during programming. Similar to this Canadian law, some U.S. gate operators are designed to “time-out[...]

Programming tips If you are having difficulty programming the integrated remote control, here are some helpful tips: R Check the frequency of hand-held remote control A (typically located on the reverse side of the remote). The integrated remote control is compatible with radio-frequency devices operating between 280-390 MHz. R Put a new battery in[...]

X Move the driver’s seat or front passenger seat as far to the rear as possible. X Removing: Pull floormat off of retainer pins : . X Installing: Press floormat eyelets ; onto retainer pins : . Infrared reflecting windshield Infrared reflecting glass reduces the amount of radiated heat entering the vehicle interior through the windows. The infrar[...]

Vehicle equipment ............................ 366 The first 1000 miles (1500 km) ....... 366 At the gas station ............................. 366 Engine compartment ........................ 368 Tires and wheels ............................... 373 Winter driving ................................... 395 Driving instructions ..........................[...]

Vehicle equipment i This Operator’s Manual describes all features, standard or optional, potentially available for your vehicle at the time of purchase. Please be aware that your vehicle might not be equipped with all features described in this manual. The first 1000 miles (1500 km) The more cautiously you treat your vehicle during the break-in p[...]

Mercedes-Benz Center to have the fuel system drained completely. ! To prevent damage to the catalytic converters, only use premium unleaded gasoline in this vehicle. Any noticeable irregularities in engine operation should be repaired promptly. Otherwise, excessive unburned fuel may reach the catalytic converter, causing it to overheat and potentia[...]

R Washer system and headlamp cleaning system ( Y page 372) R Brake fluid ( Y page 373) Engine compartment Hood G Warning! Do not pull the release lever while the vehicle is in motion. Otherwise the hood could be forced open by passing air flow. This could cause the hood to come loose and injure you and/or others. Opening G Warning! If you see flame[...]

Closing G Warning! When closing the hood, use extreme caution not to catch hands or fingers. Be careful that you do not close the hood on anyone. Make sure the hood is securely engaged before driving off. Do not continue driving if the hood can no longer engage after an accident, for example. The hood could otherwise come loose while the vehicle is[...]

X If necessary, add engine oil. For more information on engine oil, see “Fuels, coolants, lubricants etc.” ( Y page 490). For information on messages in the multifunction display concerning engine oil, see the “Practical hints” section ( Y page 444). Checking engine oil level with the control system On the CL 600 and CL 65 AMG you can check[...]

! Excess oil must be siphoned or drained off. It could cause damage to the engine and emission control system not covered by the Mercedes-Benz Limited Warranty. For information on messages in the multifunction display concerning engine oil, see the “Practical hints” section ( Y page 444). Adding engine oil ! Only use approved engine oils and oi[...]

Coolant level The engine coolant is a mixture of water and anticorrosion/antifreeze. When checking the coolant level, the vehicle must be parked on level ground, and the coolant temperature must be below 158‡ (70†). G Warning! In order to avoid any potentially serious burns: R Use extreme caution when opening the hood if there are any signs of [...]

During all seasons, use MB Windshield Washer Concentrate “MB SummerFit”. Mix it with water or premixed washer solvent/ antifreeze depending on the ambient temperature ( Y page 496). X Opening washer fluid reservoir: Pull tab of cap : upwards. X Refill the washer fluid reservoir. X Closing washer fluid reservoir: Press cap : onto filler hole unt[...]

Retreaded tires are not tested or recommended by Mercedes-Benz, since previous damage cannot always be recognized on retreads. The operating safety of the vehicle cannot be assured when such tires are used. G Warning! If you feel a sudden significant vibration or ride disturbance, or you suspect that possible damage to your vehicle has occurred, yo[...]

warm tires and adjust the tire pressure only if the tire inflation pressure is too low for the current operating conditions. If you check the tire inflation pressure when the tires are warm, the reading will be higher than the cold reading. This is normal. Do not let air out to match the specified cold tire inflation pressure. Otherwise, the tire w[...]

For the tire inflation pressure for spare wheels such as Minispare wheels or spare wheels with collapsible tire refer to R the yellow label on the spare wheel rim R the “Technical data” section of this Operator’s Manual ( Y page 490) R the Tire and Loading Information placard on the driver’s door B-pillar Unless specified otherwise, the tir[...]

R be more prone to damage from road hazards R adversely affect ride comfort R increase stopping distance Checking tire inflation pressure Safety notes G Warning! Follow recommended tire inflation pressures. Do not underinflate tires. Underinflated tires wear excessively and/or unevenly, adversely affect handling and fuel economy, and are more likel[...]

supplemental tire inflation pressure information on the inside of the fuel filler flap. The TPMS is not able to issue a warning due to a sudden dramatic loss of pressure (e.g. tire blowout caused by a foreign object). In this case bring the vehicle to a halt by carefully applying the brakes and avoiding abrupt steering maneuvers. G Warning! Each ti[...]

reduce the tire inflation pressure under such circumstances. X Switch on the ignition. X Press button = or ; on the multifunction steering wheel to select the Service menu ( Y page 214). X Press button 9 or : to select Tire Press. . X Press button a . The current inflation pressure for each tire appears in the multifunction display. Example illustr[...]

Restarting Advanced TPMS G Warning! It is the driver’s responsibility to set the tire inflation pressure to the recommended cold tire inflation pressure. Underinflated tires affect the ability to steer or brake the vehicle. You might lose control over the vehicle. When you restart the TPMS, the system sets new reference values for each tire. The [...]

Maximum tire inflation pressure G Warning! Never exceed the maximum tire inflation pressure. Follow recommended tire inflation pressures. Do not underinflate tires. Underinflated tires wear excessively and/or unevenly, adversely affect handling and fuel economy, and are more likely to fail from being overheated. Do not overinflate tires. Overinflat[...]

driver’s door B-pillar. Overloading the tires can overheat them, possibly causing a blowout. Overloading the tires can also result in handling or steering problems, or brake failure. Tire and Loading Information placard i Data shown on Tire and Loading Information placard example are for illustration purposes only. Load limit data are specific to[...]

amount of available cargo and luggage load capacity is 650 lbs (1 400 - 750 (5 x 150) = 650 lbs). X Step 5: Determine the combined weight of luggage and cargo being loaded on the vehicle. That weight may not safely exceed the available cargo and luggage load capacity calculated in step 4. X Step 6 (if applicable): If your vehicle will be towing a t[...]

Example 1 Example 2 Example 3 Step 1 Combined weight limit of occupants and cargo from Tire and Loading Information placard 1 500 lbs 1 500 lbs 1 500 lbs Example 1 Example 2 Example 3 Step 2 Number of occupants (driver and passengers) 5 3 1 Seating configuration front: 2 rear: 3 front: 1 rear: 2 front: 1 Occupants weight Occupant 1: 150 lbs Occupan[...]

Weight Rating (GVWR) and the Gross Axle Weight Rating (GAWR) for either the front or rear axle. You can obtain the GVWR and GAWR from the certification label. The certification label can be found on the driver’s door B-pillar, see the “Technical data” section ( Y page 480). Gross Vehicle Weight Rating (GVWR): The total weight of the vehicle, [...]

Tire care and maintenance G Warning! Regularly check the tires for damage. Damaged tires can cause tire inflation pressure loss. As a result, you could lose control of your vehicle. Worn, old tires can cause accidents. If the tire tread is worn to minimum tread depth, or if the tires have sustained damage, replace them. Check the tire inflation pre[...]

Storing tires ! Keep unmounted tires in a cool, dry place with as little exposure to light as possible. Protect tires from contact with oil, grease and fuels. Cleaning tires ! Never use a round nozzle to power wash tires. The intense jet of water can result in damage to the tire. Always replace a damaged tire. Uniform Tire Quality Grading Standards[...]

The safe speed on a wet, snow covered or icy road is always lower than on a dry road. You should pay particular attention to the condition of the road whenever the outside temperature is close to the freezing point. Mercedes-Benz recommends winter tires ( Y page 395) with a minimum tread depth of approximately 1 / 6 in (4 mm) on all four wheels for[...]

Thoroughly clean the mounting face of wheels and brake disks, i.e. the inner side of the wheels/tires, during each rotation. Check for and ensure proper tire inflation pressure. For information on wheel change, see “Flat tire” ( Y page 465). Tire labeling Besides tire name (sales designation) and manufacturer name, a number of markings can be f[...]

Letter “T” preceding the size designation: Temporary spare tires which are high pressure compact spares designed for temporary emergency use only. Tire width Tire width : indicates the nominal tire width in millimeters. Aspect ratio Aspect ratio ; is the dimensional relationship between tire section height and section width and is expressed in [...]

Index Speed rating H up to 130 mph (210 km/h) V up to 149 mph (240 km/h) W up to 168 mph (270 km/h) Y up to 186 mph (300 km/h) ZR...Y up to 186 mph (300 km/h) ZR...(..Y) above 186 mph (300 km/h) ZR above 149 mph (240 km/h) R At the tire manufacturer’s option, any tire with a speed capability above 149 mph (240 km/h) can include a “ZR” in the [...]

any authorized Mercedes-Benz Center will be glad to assist you. Load identification i For illustration purposes only. Actual data on tires are specific to each vehicle and may vary from data shown in above illustration. In addition to the load index, special load identification : may be molded into the tire sidewall following the letter designating[...]

Tire type code Tire type code ? may, at the option of the manufacturer, be used as a descriptive code for identifying significant characteristics of the tire. Date of manufacture The date of manufacture A identifies the week and year of manufacture. The first two figures identify the week, starting with “01” to represent the first full week of [...]

GAWR (Gross Axle Weight Rating) The GAWR is the maximum permissible axle weight. The gross vehicle weight on each axle must never exceed the GAWR for the front and rear axle indicated on the certification label located on the driver’s door B-pillar. GVW (Gross Vehicle Weight) The GVW comprises the weight of the vehicle including fuel, tools, spar[...]

Sidewall The portion of a tire between the tread and the bead. TIN (Tire Identification Number) Unique identifier which facilitates efforts by tire manufacturers to notify purchasers in recall situations or other safety matters concerning tires and gives purchasers the means to easily identify such tires. The TIN is comprised of “Manufacturer’s[...]

Always use winter tires at temperatures below 45‡ (7†) and whenever wintry road conditions prevail. Not all M+S rated tires provide special winter performance. Make sure the tires you use show the mountain/ snowflake i marking on the tire sidewall. These tires meet specific snow traction performance requirements of the Rubber Manufacturers Asso[...]

Indicated temperatures just above the freezing point do not guarantee that the road surface is free of ice. The road may still be icy, especially in wooded areas or on bridges. G Warning! On slippery road surfaces, never downshift in order to obtain braking action. This could result in drive wheel slip and reduced vehicle control. Your vehicle’s [...]

obstacles. If there are any floormats or carpets in the footwell, make sure that the pedals still have sufficient clearance. During sudden driving or braking maneuvers, the objects could get caught between the pedals. You could then no longer brake or accelerate. This could lead to accidents and injury. Power assistance G Warning! There is no power[...]

removed without putting other road users at risk R maintain a greater distance to the vehicle ahead and drive with particular care R carefully apply the brakes at the end of a trip and immediately after commencing a new trip, so that salt residues are removed from the brake disc Brake service ! The brake fluid level in the reservoir may be too low [...]

High-performance brake system The high-performance brake system is only available on CL 63 AMG and CL 65 AMG. G Warning! New vehicle brake pads and discs, and replacement brake pads and discs may take several hundred miles of driving until they provide optimum braking efficiency. Until that time, you may need to use increased brake pedal pressure w[...]

Driving abroad If you plan to drive the vehicle outside the U.S. or Canada, you should request dealer network information for your destination from any authorized Mercedes-Benz Center. Control and operation of radio transmitter Safety notes G Warning! Please do not forget that your primary responsibility is to drive the vehicle. A driver’s attent[...]

vehicle damage not covered by the Mercedes-Benz Limited Warranty. Maintenance service indicator message Information on maintenance work and maintenance intervals are specified in the Maintenance Booklet. Contact an authorized Mercedes-Benz Center, or visit www.mbusa.com (USA only) for additional information. The maintenance service indicator messag[...]

X Switch on the ignition. The standard display of the control system appears ( Y page 204). X Press button = or ; on the multifunction steering wheel to select the Service menu. X Press button : or 9 to select ASSYST PLUS . X Press button a on the multifunction steering wheel to confirm. The maintenance service indicator display with the maintenanc[...]

To avoid paint damage, you should immediately remove: R Grease and oil R Fuel R Coolant R Brake fluid R Bird droppings R Insects R Tree resins etc. Frequent washing reduces and/or eliminates the aggressiveness and potency of the above adverse influences. More frequent washings are necessary to deal with unfavorable conditions: R near the ocean R in[...]

normally be done every 3 to 5 months, depending on the climate and washing detergent used. Mercedes-Benz approved Paint Cleaner should be applied if the paint surface shows signs of embedded dirt (i.e. loss of gloss). Do not apply any of these products or wax if your vehicle is parked in the sun or if the hood is still hot. X Use the appropriate MB[...]

X When taking the vehicle through an automatic conveyor-type car wash: Make sure the automatic transmission remains in neutral position N . Observe instructions, see “Remaining in neutral position N ” ( Y page 292). When leaving the automatic car wash, make sure the mirrors are folded out. After running the vehicle through an automatic car wash[...]

Cleaning the rear view camera lens X Only use clean water and a soft, non- scratching cloth to clean rear view camera lens : . Be careful not to apply wax to rear view camera lens : when waxing the vehicle. If necessary, remove the wax using the Mercedes-Benz approved Car Shampoo with plenty of water. ! Do not clean the camera and the area around t[...]

Cleaning the windows and the wiper blades ! The windshield wipers must be in a vertical position before folding them away from the windshield. They could otherwise damage the hood. Never open the hood when the wiper arms are folded forward. X Make sure the hood is fully closed. X Switch on the ignition. X Turn combination switch to wiper setting °[...]

Plastic and rubber parts X Use a gentle dishwashing detergent or mild detergent for delicate fabrics as a washing solution. X Wipe with a cloth moistened in a lukewarm solution. The surface may temporarily change color. If this is the case, wait for it to dry. G Warning! Do not use cleaners or cockpit care sprays containing solvents to clean the co[...]

X Wipe leather upholstery with a damp cloth and dry thoroughly or clean with Mercedes- Benz approved Leather Care. ! To avoid damage to leather upholstery: R Wipe with light pressure only. R Do not clean with abrasive cleaning agents such as scouring milk or powder. R Do not soak the leather upholstery. As leather is a natural product, it could oth[...]

Vehicle equipment ............................ 412 Where will I find ...? .......................... 412 Vehicle status messages in the multifunction display ....................... 414 What to do if … .................................. 450 Unlocking/locking manually ........... 460 Replacing SmartKey batteries ......... 461 Replacing bulbs .....[...]

Vehicle equipment i This Operator’s Manual describes all features, standard or optional, potentially available for your vehicle at the time of purchase. Please be aware that your vehicle might not be equipped with all features described in this manual. Where will I find ...? First aid kit i Check expiration dates and contents for completeness at [...]

X Take the collapsible wheel chock from the vehicle tool kit ( Y page 412). X Setting up: Tilt both plates upward : . X Fold the lower plate outward ; . X Guide the tabs of the lower plate all the way into the openings of base plate = . For information on where to place wheel chocks when changing a wheel, see “Lifting the vehicle” ( Y page 466)[...]

lower the trunk floor before closing the trunk. X Remove spare wheel mounting = by turning it counterclockwise. i Vehicle tool kit box ; can only be removed together with spare wheel mounting = . After removing spare wheel mounting = , you can disengage vehicle tool kit box ; from spare wheel mounting = . X Remove spare wheel : . The spare wheel bo[...]

R malfunction/warning messages R failure of any systems Driving characteristics may be impaired. If you must continue to drive, do so with added caution. Contact an authorized Mercedes- Benz Center as soon as possible. Read and observe the notes on the HOLD function ( Y page 316) and parking ( Y page 288) when you park the vehicle. On the pages tha[...]

Text messages Safety systems Display messages Possible causes/consequences and X Solutions PRE-SAFE Inoperativ e See Oper. Manual The PRE-SAFE ® system has failed. All other occupant safety systems, such as the air bags, are still available. X Contact an authorized Mercedes-Benz Center as soon as possible. PRE-SAFE Function Currently Limited See O[...]

Display messages Possible causes/consequences and X Solutions Front Passenger Airbag Enabled See Oper. Manual The front passenger front air bag is activated while driving even though a child, small individual, or object below the system’s weight threshold is on the front passenger seat, or the front passenger seat is empty. Objects on the seat or[...]

G Warning! If the 42 indicator lamp remains out even after performing the above corrective steps, do not have any children 12 years old and under and other small individuals use the front passenger seat until the system has been repaired. Display messages Possible causes/consequences and X Solutions Front Passenger Airbag Disabled See Oper. Manual [...]

G Warning! If the 42 indicator lamp remains illuminated with an adult occupant on the front passenger seat even after performing the above corrective steps, do not have any passenger use the front passenger seat until the system has been repaired. Driving systems Display messages Possible causes/consequences and X Solutions ABC Malfunctio n Stop Ve[...]

Display messages Possible causes/consequences and X Solutions ABC Vehicle Rising Please Wait Briefly The vehicle’s level is too low while at a standstill. The vehicle will be raised. X Do not drive off. X Wait until the message disappears from the multifunction display. You may then drive off. Cruise Control Inoperativ e The cruise control is mal[...]

Display messages Possible causes/consequences and X Solutions DISTRONIC PLUS Currently Unavailabl e See Oper. Manual The DISTRONIC PLUS is temporarily unavailable. The DISTRONIC PLUS is deactivated because: R the DISTRONIC PLUS cover in the radiator grille is dirty R its function is impaired as a result of heavy precipitation R the radar sensor sys[...]

Display messages Possible causes/consequences and X Solutions DISTRONIC PLUS - - - mph One of the activation conditions for the DISTRONIC PLUS has not been fulfilled. You may have attempted to set a speed below 20 mph (30 km/h) . X Drive faster than 20 mph (30 km/h) if the situation allows and set the speed. X Check the activation conditions for th[...]

Display messages Possible causes/consequences and X Solutions Blind Spot Assist Currently Unavailabl e See Oper. Manual The Blind Spot Assist is deactivated because the area around the sensors in the front or the rear bumper is dirty. X Clean the front and rear bumper ( Y page 406). The Blind Spot Assist is deactivated because the battery voltage i[...]

Display messages Possible causes/consequences and X Solutions Parking Guidance Canceled The Advanced Parking Guidance has been canceled because: R the vehicle is sliding R the bumper became dirty in the area of the sensors R there has been a malfunction X Use the Advanced Parking Guidance again later. If the parking space symbol is not shown in the[...]

Display messages Possible causes/consequences and X Solutions Service Required Do Not Shift Gears The automatic transmission cannot be shifted out of the current transmission position because of a malfunction. If the automatic transmission is in drive position D : X Without shifting the automatic transmission out of drive position D , drive to an a[...]

Display messages Possible causes/consequences and X Solutions Next Service X in ... days in ... mls (km) The specified maintenance service must be carried out within the remaining time range or driving distance ( Y page 402). X Have the maintenance service carried out at an authorized Mercedes-Benz Center. Service X Due The specified maintenance se[...]

Display messages Possible causes/consequences and X Solutions Wheel Sensor(s) Missing At least one sensor is defect (e.g. battery is empty). The respective tire is indicated by – – instead of the tire inflation pressure in the multifunction display. X Have the Advanced TPMS checked at an authorized Mercedes-Benz Center. X Have the wheel sensors[...]

Display messages Possible causes/consequences and X Solutions Check Tires The tire inflation pressure in at least one tire is significantly below the reference value. The respective tire is indicated in the multifunction display. X Carefully bring the vehicle to a halt, avoiding abrupt steering and braking maneuvers. X Check and adjust tire inflati[...]

Display messages Possible causes/consequences and X Solutions $ (USA only) J (Canada only) ABS and ESC Inoperativ e See Oper. Manual In addition, the yellow ESC warning lamp ÷ , the yellow ESC OFF warning lamp å , and the yellow ABS indicator lamp ! come on. The brake system is still functioning normally but due to a malfunction, the ABS, the BAS[...]

Display messages Possible causes/consequences and X Solutions $ (USA only) J (Canada only) ABS and ESC Currently Unavailabl e See Oper. Manual In addition, the yellow ESC warning lamp ÷ , the yellow ESC OFF warning lamp å , and the yellow ABS indicator lamp ! come on. The brake system still functions normally but due to insufficient power supply,[...]

Display messages Possible causes/consequences and X Solutions F (USA only) ! (Canada only) Please Release Parking Brake In addition, the red indicator lamp for the electronic parking brake flashes and an acoustic warning sounds. You are driving with the electronic parking brake engaged, or you are carrying out an emergency brake maneuver with the e[...]

Display messages Possible causes/consequences and X Solutions F (USA only) ! (Canada only) Parking Brake See Oper. Manual In addition, the yellow warning lamp for the electronic parking brake comes on. The red indicator lamp for the electronic parking brake may also come on. The electronic parking brake is malfunctioning. To release: X Pull handle [...]

Display messages Possible causes/consequences and X Solutions F (USA only) ! (Canada only) Parking Brake See Oper. Manual In addition, the red indicator lamp for the electronic parking brake flashes and the yellow warning lamp for the electronic parking brake comes on. The electronic parking brake is malfunctioning. X Switch ignition off and back o[...]

Display messages Possible causes/consequences and X Solutions F (USA only) ! (Canada only) Parking Brake Inoperativ e When you engage or release the electronic parking brake, the red indicator lamp for the electronic parking brake flashes and goes out after approx. 10 seconds. The yellow warning lamp for the electronic parking brake comes on. The e[...]

Safety systems Display messages Possible causes/consequences and X Solutions ÷ Inoperativ e See Oper. Manual In addition, the yellow ESC warning lamp ÷ and the yellow ESC OFF warning lamp å come on. The brake system is still functioning normally but due to a malfunction, the BAS, the BAS PLUS, the ESC, the hill-start assist system, the HOLD func[...]

Display messages Possible causes/consequences and X Solutions ÷ Currently Unavailabl e See Oper. Manual If the yellow ESC warning lamp ÷ flashes while driving and this message appears, the Electronic Traction System (ETS/ 4-ETS) has switched off to prevent overheating of the drive wheel brakes. The BAS PLUS and the PRE-SAFE ® Brake are also not [...]

Display messages Possible causes/consequences and X Solutions 6 Left Side Curtain Airbag Malfunctio n Service Required The left window curtain air bag may not work properly. X Drive with added caution to the nearest authorized Mercedes-Benz Center. 6 Right Side Curtain Airbag Malfunctio n Service Required The right window curtain air bag may not wo[...]

Display messages Possible causes/consequences and X Solutions ¨ STOP Car Too Low The AIRMATIC is malfunctioning. X Avoid excessive steering maneuvers. The fenders or tires could otherwise be damaged. Listen for scraping noises. X Stop and press the vehicle level control switch to select a higher vehicle level ( Y page 317). X Do not drive faster t[...]

Display messages Possible causes/consequences and X Solutions Á Night View Assist Lights ON or AUTO, Not in R Gear You have tried to switch on Night View Assist, but the exterior lamp switch is not set to c or L . In addition, the automatic transmission is in reverse gear R . X Turn the exterior lamp switch to c or L ( Y page 275). X Shift the aut[...]

Display messages Possible causes/consequences and X Solutions E Shift to P You have attempted to turn off the engine with the KEYLESS- GO start/stop button and opened the driver’s door with the automatic transmission not shift to park position P . X Shift the automatic transmission to park position P ( Y page 291). or X Close the driver’s door.[...]

Display messages Possible causes/consequences and X Solutions  Key Not Detected (message appears in red) The SmartKey with KEYLESS-GO is not detected while the engine is running because the SmartKey is not in the vehicle. X Stop the vehicle as soon as it is safe to do so. X Engage the electronic parking brake. X Search for the SmartKey. The vehic[...]

Engine Display messages Possible causes/consequences and X Solutions + Check Coolant Level See Oper. Manual The coolant level is too low. X Add coolant ( Y page 372). X If you have to add coolant frequently, have the cooling system checked at an authorized Mercedes-Benz Center. G Warning! Do not spill antifreeze on hot engine parts. Antifreeze cont[...]

! The engine should not be operated with the coolant temperature above 248‡ (120†). Doing so may cause serious damage which is not covered by the Mercedes-Benz Limited Warranty. Display messages Possible causes/consequences and X Solutions ? Coolant Low Stop Vehicle Turn Engine Off The poly-V-belt could be broken. X Stop the vehicle immediately[...]

Display messages Possible causes/consequences and X Solutions # The battery is no longer charging. Possible causes: R alternator malfunctioning R broken poly-V-belt R a malfunction in the electronic system X Stop immediately in a safe location or as soon as it is safe to do so and check the poly-V-belt. X If it is broken: Do not continue to drive. [...]

Visually check for oil leaks. If there are no obvious oil leaks, drive to the nearest service station to refill your engine oil to the required level. For information on approved engine oils contact an authorized Mercedes-Benz Center or visit www.mbusa.com (USA only). ! Engine oil level warnings should not be ignored. Extended driving with the symb[...]

Lamps Display messages Possible causes/consequences and X Solutions b Active Headlamps Inoperativ e The active headlamps are malfunctioning. X Contact an authorized Mercedes-Benz Center as soon as possible. b Check Left Reverse Lamp or Check Right Reverse Lamp The left or right backup lamp is malfunctioning. X Contact an authorized Mercedes-Benz Ce[...]

Display messages Possible causes/consequences and X Solutions b Check Rear Left Sidemarker Lamp or Check Rear Right Sidemarker Lamp The rear left side or right side marker lamp is malfunctioning. X Contact an authorized Mercedes-Benz Center as soon as possible. b Check Front Left Parking Lamp or Check Front Right Parking Lamp The left or right fron[...]

Display messages Possible causes/consequences and X Solutions b Auto Lamp Function Inoperativ e The light sensor is malfunctioning. The headlamps come on automatically. X Contact an authorized Mercedes-Benz Center as soon as possible. To switch off the headlamps (U.S. vehicles only): X Switch off the daytime running lamp mode in the instrument clus[...]

Display messages Possible causes/consequences and X Solutions b Check Left Cornering Light or Check Right Cornering Light The left or right corner-illuminating lamp is malfunctioning. X Contact an authorized Mercedes-Benz Center as soon as possible. b Check Rear Left Turn Signal or Check Rear Right Turn Signal The left or right rear turn signal lam[...]

Tires Display messages Possible causes/consequences and X Solutions h Tire Press. Warning Caution Tire Malfunctio n At least one tire is deflating. X Carefully bring the vehicle to a halt, avoiding abrupt steering and braking maneuvers. X If necessary, change the wheel ( Y page 465). h Check Tire Pressure The tire inflation pressure in at least one[...]

Brake Problem Possible causes/consequences and X Solutions ! The yellow ABS indicator lamp comes on while the engine is running. The brake system is still functioning normally but due to a malfunction, the ABS, the BAS, the BAS PLUS, the ESC, the hill-start assist system, the HOLD function, the Adaptive Brake Lights, the PRE-SAFE ® system, and the[...]

Problem Possible causes/consequences and X Solutions ! The yellow ABS indicator lamp comes on while the engine is running. The brake system is still functioning normally but temporarily the ABS, the BAS, the BAS PLUS, the ESC, the hill-start assist system, the HOLD function, the Adaptive Brake Lights, the PRE-SAFE ® system, and the PRE-SAFE ® Bra[...]

Problem Possible causes/consequences and X Solutions F (USA only) ! (Canada only) The red indicator lamp for the electronic parking brake flashes and/or the yellow warning lamp for the electronic parking brake is on. The electronic parking brake is malfunctioning or defective. X Read and observe messages that may appear in the multifunction display[...]

Safety systems Problem Possible causes/consequences and X Solutions 7 The red seat belt telltale comes on for a maximum of 6 seconds after starting the engine. The seat belt telltale reminds you and your passengers to fasten your seat belts before driving off. X Fasten your seat belts. Regardless of whether the seat belts are fastened or not, the s[...]

i After 60 seconds with an unfastened seat belt the warning chime stops sounding and the seat belt telltale illuminates continuously. The seat belt telltale will only go out if both, the driver and front passenger’s seat belt are fastened, or the vehicle is standing still and a door is opened. Problem Possible causes/consequences and X Solutions [...]

Problem Possible causes/consequences and X Solutions å The yellow ESC OFF warning lamp comes on while the engine is running. The ESC has been switched off. Risk of accident! When the ESC is switched off it will not stabilize the vehicle if the system recognizes that the vehicle starts to skid or that a wheel is spinning. X Switch the ESC back on. [...]

Driving systems Problem Possible causes/consequences and X Solutions · DISTRONIC PLUS or PRE-SAFE ® Brake: The red distance warning lamp comes on while driving and an acoustic warning sounds. You are gaining too rapidly on the vehicle ahead of you or DISTRONIC PLUS or PRE-SAFE ® Brake has recognized a stationary obstacle on your probable line of[...]

Tires Problem Possible causes/consequences and X Solutions h USA only: Combination low tire pressure telltale/TPMS malfunction telltale for the Advanced TPMS illuminates continuously. Canada only: Low tire pressure telltale for the Advanced TPMS illuminates continuously. The Advanced TPMS detects a loss of pressure in at least one tire. X Carefully[...]

Underinflation also reduces fuel efficiency and tire tread life, and may affect the vehicle’s handling and stopping ability. Please note that the TPMS is not a substitute for proper tire maintenance, and it is the driver’s responsibility to maintain correct tire pressure, even if underinflation has not reached the level to trigger illumination [...]

Problem Possible causes/consequences and X Solutions 42 The front passenger front air bag off indicator lamp does not illuminate and/or does not remain illuminated with the weight of a typical 12-month-old child in a standard child restraint or less on the front passenger seat. The system is malfunctioning. X Make sure there is nothing between seat[...]

Unlocking the driver’s door X Insert mechanical key ; into the driver’s door lock. X Turn mechanical key ; counterclockwise to position 1 . X Pull the door handle past the resistance point until the locking knob moves up. The driver’s door is unlocked. X Pull the door handle once more to open the driver’s door. X Turn mechanical key ; back [...]

G Warning! Batteries contain poisonous and corrosive substances. Therefore, keep the batteries out of reach of children. If a battery is swallowed, seek medical help immediately. G Warning! SmartKey batteries contain perchlorate material, which may require special handling and regard for the environment. Check with your local government’s disposa[...]

SmartKey with KEYLESS-GO X Insert mechanical key : into opening. X Press mechanical key : in direction of arrow. Battery compartment ; is unlatched. X Pull battery compartment ; out of the SmartKey housing. X Pull out batteries = . X Insert new batteries = under contact springs ? with the positive terminal (+) side facing up. X Return battery compa[...]

Replacing bulbs for rear lamps Tail lamp unit The tail lamps are equipped with HiP bulbs and LEDs. Have them replaced at an authorized Mercedes-Benz Center. Replacing wiper blades Safety notes G Warning! For safety reasons, switch off the wipers and remove the SmartKey from the starter switch (vehicles with KEYLESS-GO: Make sure the vehicle’s on-[...]

X Fold the wiper arm forward until it snaps into place. X Turn the wiper blade in direction of arrow : . X Slide the wiper blade sideways out of the retainer in the direction of arrow ; . Installing wiper blades X Slide the wiper blade onto the wiper arm until it locks in place. X Rotate the wiper blade into a position parallel to the wiper arm. X [...]

Mounting the spare wheel Introduction X Prepare the vehicle as described ( Y page 465). X Take the following out of the vehicle: R spare wheel R jack R vehicle tool kit R wheel bolts for spare wheel For information on where to find the respective items, see “Where will I find ...?” ( Y page 412) and ( Y page 413). i Vehicles without spare wheel[...]

Always try lifting the vehicle using the jack on a level surface. However, should circumstances require you to do so on a hill: X Place wheel chocks or other sizeable objects on the downhill side in front of both wheels on the side opposite to the side on which the wheel is to be changed. G Warning! Only jack up the vehicle on level ground or on sl[...]

X Unscrew the uppermost wheel bolt and remove it. X Replace this wheel bolt with alignment bolt : . X Remove the remaining bolts. ! Do not place wheel bolts in sand or dirt. This could result in damage to the wheel bolts and wheel hub threads. X Remove the wheel. Attaching the spare wheel G Warning! Always replace wheel bolts that are damaged or ru[...]

Lowering the vehicle X Lower the vehicle by turning the crank counterclockwise until the vehicle is resting fully on its own weight. X Remove the jack. X Tighten the five wheel bolts evenly, following the diagonal sequence illustrated ( : to A ), until all bolts are tight. Observe a tightening torque of 110 lb-ft (150 Nm). G Warning! Have the tight[...]

Recycling of the battery is the preferred method of disposal. Many states (USA only) or provinces (Canada only) require sellers of batteries to accept the old battery for recycling. G Warning! Failure to follow these instructions can result in severe injury or death. Never lean over batteries while connecting. You might get injured. Battery fluid c[...]

then uses very little power and the battery is spared. If the battery is discharged, you must use the mechanical key to unlock the vehicle. Charging the battery G Warning! Never charge a battery while still installed in the vehicle unless the accessory battery charge unit approved by Mercedes-Benz is being used. Gases may escape during charging and[...]

If the battery is discharged, the engine can be started with jumper cables and the fully charged battery of another vehicle or an equivalent starter pack. Observe the following: R Access to the battery is not possible on all vehicles. If you cannot access the battery of the other vehicle, provide jump start power by an external battery or starter p[...]

X Connect positive terminal : of charged battery A with positive terminal ; with a jumper cable. Clamp the cable to positive terminal : of charged battery A first. X Start engine of the vehicle with charged battery A and run at idle speed. X Connect negative terminal = of charged battery A with negative terminal ? with a jumper cable. Clamp the cab[...]

For more information see “Battery” ( Y page 469) or “Jump starting” ( Y page 471). Installing towing eye bolt Depending on whether you are towing a vehicle or you are being towed, the towing eye bolt can be screwed into threaded holes which are located behind covers on each bumper. The towing eye bolt is supplied with the vehicle tool kit, [...]

Removing towing eye bolt X Loosen towing eye bolt ; by turning it counterclockwise. X Unscrew towing eye bolt ; . X Reinstalling cover: Fit cover : ( Y page 474) and snap it into place. X Store the towing eye bolt ; and wheel wrench back into the vehicle tool kit. Towing with all wheels on the ground G Warning! If circumstances require towing the v[...]

! Vehicles without 4MATIC: Because the ESC operates automatically, the engine and ignition must be shut off (SmartKey in starter switch position 0 or 1 or KEYLESS-GO start/stop button in position 0 or 1 ) when the vehicle is being towed with one axle raised. Active braking action through the ESC may otherwise seriously damage the brake system which[...]

Fuse box on passenger side X Open the respective door. X Using your hands, pull cover : in direction of arrow and remove it. X Closing: Hook fuse box cover : into the opening at the front. ! The fuse box cover must be properly positioned as described. Otherwise, moisture or dirt could enter the fuse box and possibly impair fuse operation. Fuse box [...]

Example illustration fuse box on passenger side X Removing cover: Press retaining lugs : . X Remove fuse box cover ; . X Installing cover: Attach fuse box cover ; . X Press fuse box cover ; down. ! The fuse box cover must be properly positioned as described. Otherwise, moisture or dirt could enter the fuse box and possibly impair fuse operation. X [...]

Vehicle equipment ............................ 480 Parts service ..................................... 480 Warranty coverage ........................... 480 Identification labels .......................... 480 Vehicle specification CL 550 4MATIC (216.386) ............................. 483 Vehicle specification CL 600 (216.376) .....................[...]

Vehicle equipment i This Operator’s Manual describes all features, standard or optional, potentially available for your vehicle at the time of purchase. Please be aware that your vehicle might not be equipped with all features described in this manual. Parts service All authorized Mercedes-Benz Centers maintain a stock of Genuine Mercedes-Benz Pa[...]

The Vehicle Identification Number (VIN) can be found R on certification label : on the driver’s door B-pillar R embossed underneath a cover behind the rear center armrest ( Y page 481) R on the lower edge of the windshield ( Y page 481) Example certification label (U.S. vehicles) ; VIN = Paintwork code Example certification label (Canada vehicles[...]

AMG vehicles A Engine number (engraved on engine) B VIN (on lower edge of windshield) C Emission control information label, includes both federal and California certification exhaust emission standards i When ordering parts, please specify vehicle identification and engine number. 482 Identification labels Technical data 216_AKB; 3; 90, en-US d2ure[...]

Vehicle specification CL 550 4MATIC (216.386) The quoted data apply only to the standard vehicle. Contact an authorized Mercedes- Benz Center for the corresponding data of all special bodies and special equipment. Engine CL 550 4MATIC Engine, type 273 Mode of operation 4-stroke engine, gasoline injection No. of cylinders 8 Bore 3.86 in (98.00 mm) S[...]

Engine CL 600 Engine, type 275 Mode of operation 4-stroke engine, gasoline injection No. of cylinders 12 Bore 3.23 in (82.00 mm) Stroke 3.43 in (87.00 mm) Total piston displacement 336.4 cu in (5 513 cm 3 ) Compression ratio 9.0:1 Output acc. to SAE J 1349 38 510 hp/5 000 rpm (380 kW/5 000 rpm) Maximum torque acc. to SAE J 1349 612 lb-ft/ 1 800 - 3[...]

Engine CL 63 AMG Compression ratio 11.3:1 Output acc. to SAE J 1349 40 518 hp/6 800 rpm (386 kW/6 800 rpm) Maximum torque acc. to SAE J 1349 465 lb-ft/5 200 rpm (630 Nm/5 200 rpm) Maximum engine speed 7 200 rpm Firing order 1-5-4-2-6-3-7-8 Poly-V-belt 2 360 mm Electrical system CL 63 AMG Alternator 14 V/220 A Starter motor 12 V/2.1 kW Battery 12 V/[...]

Engine CL 65 AMG Maximum torque acc. to SAE J 1349 738 lb-ft/ 2 000 - 4 000 rpm (1 000 Nm/ 2 000 - 4 000 rpm) Maximum engine speed 5 950 rpm Firing order 1-12-5-8-3-10- 6-7-2-11-4-9 Poly-V-belt 2 370 mm Electrical system CL 65 AMG Alternator 14 V/220 A Starter motor 12 V/1.7 kW Battery 12 V/95 Ah Spark plugs, type NGK IFR 6Q-G Spark plugs, electrod[...]

placard with the recommended tire inflation pressures for cold tires is located on the driver’s door B-pillar. Supplemental tire inflation pressure information for driving at high speeds or for vehicle loads less than the maximum loaded vehicle condition can be found on the tire inflation pressure label. The tire inflation pressure label is locat[...]

Same size tires CL 550 4MATIC 18" wheels Rims (light alloy) Wheel offset 8.5 J x 18 H2 1.69 in (43 mm) All-season tires 48,49,50 255/45 R18 99H M+S Winter tires 48,49,51 255/45 R18 99V M+S i CL 550 4MATIC (Sport Package) CL 550 4MATIC (AMG Sport Package) CL 600 CL 600 (Sport Package) 18" wheels Rims (light alloy) Wheel offset 8.5 J x 18 H[...]

Mixed size tires CL 600 53 18" wheels Front axle Rims (light alloy) Wheel offset 8.5 J x 18 H2 1.69 in (43 mm) All-season tires 54 255/45 R18 99H M+S Rear axle Rims (light alloy) Wheel offset 9.5 J x 18 H2 1.69 in (43 mm) All-season tires 54,55 275/45 R18 103H M+S CL 600 19" wheels Front axle Rims (light alloy) Wheel offset 8.5 J x 19 H2 [...]

Spare wheel ! Compare the recommended tire inflation pressure for your vehicle with the tire inflation pressure on the yellow label located on the spare wheel rim. If the tire inflation pressure on the yellow label on the spare wheel rim differs from the values given in this Operator’s Manual, inflate the tire to the recommended tire inflation pr[...]

Model Capacity Fuels, coolants, lubricants, etc. Automatic transmission CL 550 4MATIC 10.6 US qt (10.0 l) MB Automatic Transmission Fluid CL 600 7.9 US qt (7.5 l) CL 63 AMG 58 9.25 US qt (8.75 l) CL 65 AMG 9.2 US qt (8.7 l) Rear axle CL 550 4MATIC 1.9 US qt (1.8 l) Hypoid gear oil (SAE 85W-90) CL 600 1.7 US qt (1.6 l) CL 63 AMG 1.3 US qt (1.2 l) Fu[...]

Model Capacity Fuels, coolants, lubricants, etc. Air conditioning system All models — R134a refrigerant and special PAG lubricant oil (never R 12) Washer system and headlamp cleaning system All models 6.9 US qt (6.5 l) MB Windshield Washer Concentrate 59 ( Y page 496) Washer fluid mixing ratio ( Y page 496) Approved engine oils Engine oils are sp[...]

Viscosity grades for engine oils Using the chart below, select oil viscosity according to the lowest air temperature expected before the next oil change. Engine oil additives ! Do not blend oil additives with engine oil. They may damage the engine. Damage or malfunctions resulting from blending oil additives are not covered by the Mercedes- Benz Li[...]

is fully loaded or operating in mountainous terrain. Fuel requirements Only use premium unleaded gasoline. The octane number (posted at the pump) must be 91 min. It is an average of both the Research Octane Number (RON) and the Motor Octane Number (MON): (RON+MON)/2. This is also known as the ANTI-KNOCK INDEX. Reformulated gasolines (RFG) and/or un[...]

The coolant solution must be used year round to provide the necessary corrosion protection and increase boil-over protection. Refer to the Maintenance Booklet for replacement interval. Coolant system design and coolant used determine the replacement interval. The replacement interval published in the Maintenance Booklet is only applicable if MB 325[...]

Model Approximate freeze protection -35‡ (-37†) -49‡ (-45†) Cooling system CL 550 4MATIC 6.3 US qt (6.0 l) 7.0 US qt (6.6 l) CL 600 7.9 US qt (7.5 l) 8.8 US qt (8.3 l) CL 63 AMG 5.7 US qt (5.4 l) 6.2 US qt (5.9 l) CL 65 AMG 7.4 US qt (7.0 l) 8.1 US qt (7.7 l) Low temperature cooling system CL 600 1.4 US qt (1.3 l) 1.5 US qt (1.4 l) Washer s[...]

Service and Literature Your authorized Mercedes-Benz Center has trained technicians and Genuine Mercedes- Benz Parts to service your vehicle properly. For expert advice and quality service, contact an authorized Mercedes-Benz Center. If you are interested in obtaining service literature for your vehicle, please contact an authorized Mercedes-Benz C[...]

Order no. 6515 2315 13 Part no. 216 584 78 81 Edition A 2010 É2165847881QËÍ 2165847881 216_AKB; 3; 90, en-US d2ureepe, Version: 2.11.8.1 2009-05-15T11:47:50+02:00 - Seite 498[...]