Metapace L-1 manuale d’uso

User's Manual Met ap ace L-1 Label Printer Rev . 1.00[...]

Rev . 1.00 - 2 - Met ap ace L-1 ■ T able of Content s ※ Manual Information & Usage Pr ecautions ·································································· 3 1. Content C onfirmation ···········································[...]

Rev . 1.00 - 3 - Met ap ace L-1 ■ Manual Information ※ Manual Informatio n & Usage Precautions This user manual contains basic information for product usage as well as for emergency measures that may be required. The following sep arate manuals provide more detailed content on various t ※ echnological issues and areas. 1. Windows Driver M[...]

Rev . 1.00 - 4 - Met ap ace L-1 ■ Safety Precautions In using the present appliance, please keep the following safety regul ations in order to prevent any hazard or material damage. W ARNING Violating following instructions c an cause serious injury or death. Do not bend the cable b y force or leave it under any heavy objec t. • A damaged ca bl[...]

Rev . 1.00 - 5 - Met ap ace L-1 CAUTION Violatin g following instructions c an cause slight wound or damage the a ppliance . Do not use the printer when it is out of order . This can cause a fire or an electro cution. • Switch off and unplug the printer before calling your dealer . Do not let water or othe r foreign object s in the printer . • [...]

Rev . 1.00 - 6 - Met ap ace L-1 1. Content Confirmation The following items should all be c ontained in the printer p ackage. Contact the dealer from which the purchas e was made if any it em is damaged and/or missing. Met ap ace L-1 Paper Power Cord AC Adapte r Cleaning Pen CD User ’ s Manual ※ Optiona l items RS-232C(Serial) Cable IEEE1284 (P[...]

Rev . 1.00 - 7 - Met ap ace L-1 2. Product Part Names Feed Button Cover Peel-of f Cover Lever Printer Head Paper Holder Paper Guide Peel-off Senso r Paper Gap Senso r Paper Cover Power Switch[...]

Rev . 1.00 - 8 - Met ap ace L-1 S A MS UNG L A B E L P R N T E R Dip Switch Auto Cutter (Option) IEEE1284 Receptacle USB Receptacle Fan-Fold Power Receptacle RS-232C Receptacle[...]

Rev . 1.00 - 9 - Met ap ace L-1 3. Inst allation & Usage 3-1 Power Connection Connect power to the prin ter as shown below . 1) T urn off the printer power switch. 2) Check to see that the AC adapter voltage matches that of the power source. 3) Connect the AC adapter jack to the printer power connector . 4) Connect the power cord to the AC adap[...]

Rev . 1.00 - 10 - Met ap ace L-1 3-2 Interface Cable Connection Connect the interface cable as shown below . This printer supports the following communications interface st andards. - RS-232C (Serial) - IEEE1284 (Parallel) - USB - Ethernet 1) T urn off the power switch. 2) Connect the communication cable to t he printer communication port to be use[...]

Rev . 1.00 - 1 1 - Met ap ace L-1 3-3 Paper Installation 1) Open the Paper Cover . 2) S pread the paper holder and insert paper as shown. S A M S U N G L A B E L P R I N T E R 3) Keep note of paper printing direction. 4) Adjust the paper guide to the wid th of the paper . S A M S U N G L A B E L P R I N T E R 5) Close the Paper Cover .[...]

Rev . 1.00 - 12 - Met ap ace L-1 3-4 LED Display Feed button Paper feed or cancel the print job. LED The current printer st atus can be viewed. (Refer to below) The current printer status can be viewed via the printer ’ s LED display . 1) Green LED on - The printer wait s for the data from Host (PC) in normal mode. 2) Orange LED on - It means pap[...]

Rev . 1.00 - 13 - Met ap ace L-1 3-5 Test printing 3-5-1 Printing using Windows driver 1) Install the Windows driver . Refer to the “Windows driver manual” in the CD for the installation procedure. 2) Set the “port” of Windows driver to the appropriate in terface to be us ed. Refer to the “Ethernet interface user ’s manual” in the CD [...]

Rev . 1.00 - 14 - Met ap ace L-1 4. Self-T est The self-test checks whether t he printer has any problems. (Users cannot perform this procedure if using the printer ’ s label peel-off option.) If the printer does not function pr operly , contact an authorized dealer . The self-test checks the following; 1) Make sure that the paper roll has been i[...]

Rev . 1.00 - 15 - Met ap ace L-1 5. Det ailed features 5-1 Printer Settings with Dip switches The dip switches are located on the bottom of the printer. The dip switches are used to set the printer to perform various functions. Follow these steps when changing dip switch settings: 1) Turn the printer power switch off. 2) Remove the screw on the bot[...]

Rev . 1.00 - 16 - Met ap ace L-1 [T able 1] Dip Switch 1 No Functions Details Off 4.0 ips 1-1 S peed Selection On 5.0 ips 4 3 2 Density Off Of f Off 13 Off Of f On 14 Off On Of f 15 Off On On 16 On Off Of f 17 On Off On 18 On On Off 19 1-2 1-3 1-4 Density Selection On On On 20 Off Normal Mode 1-5 Exhibition Selection On Demo Mode Off Label Paper 1-[...]

Rev . 1.00 - 17 - Met ap ace L-1 5-3 Gap Sensor Auto-Calibration Gap sensor auto-calibration is used when the pr inter does not detect a gap on the label paper correctly . Generally a printer is set to detect most of gap types but some times it fails to detect and keep feeding the paper without a stop when spec ial paper used. In such case, use gap[...]

Rev . 1.00 - 18 - Met ap ace L-1 5-4 Gap Sensor Manual-Calibration Manual-calibration of media detection can be us ed when the printer cannot detect a media gap (or black mark) even after auto-calibration has been executed. Users can calibrate sensor parameters in det ail by using the utilit y program provided by the manufacturer . Please make sure[...]

Rev . 1.00 - 19 - Met ap ace L-1 5-5 The Peel-Off This function is used to automatically separate labels from the liner . - The peeler is for Label Paper only . - When the peeler switch is on, labels are not printed if previous printed labels have been removed from the peeler . - When the peeler function is not required, turn the peeler switch of f[...]

Rev . 1.00 - 20 - Met ap ace L-1 3) Adjust the paper gui des and close the cover . 4) T urn the printer off and back on. ( O ) ( X )[...]

Rev . 1.00 - 21 - Met ap ace L-1 5-6 Using Fan-Fold Paper Insert paper through both the rear slot and guides. Adjust holders and guides to the width of the p aper . 1) Open the Dust Cover and insert paper . O P E N 2) Adjust Paper Holders to the p aper width and fixed Paper Holders with fixing tool. 3) Adjust Paper Guides and close the Paper Cover [...]

Rev . 1.00 - 22 - Met ap ace L-1 5-7 Auto Cutter (option) Auto cutter should be used for conti nuous paper only . ( i.e. roll paper) 1. Open the Dip switch cover , and make the switch 1 number 7 “On”. (Refer to printer mode setting at Chapter 5-1.) 2. Put a paper roll into the printer and close the cover . S A M S U N G L A B E L P R N T E R ?[...]

Rev . 1.00 - 23 - Met ap ace L-1 6. Cleaning Head Paper dust on the heating elements may lower the printer quality. When dirty, clean the print head as follows: ※ CAUTION - Make sure to turn the prin ter power off prior to cleaning. - As the print head gets very hot during printi ng, if intending to clean the print head, turn the printer power of[...]

Rev . 1.00 - 24 - Met ap ace L-1 7. Appendix 7-1 Specifications Item Description Printing Method Thermal T ransfer / Direct Thermal Printing Dot Density 203 dpi (8 dot/mm) Printing Width 104 mm Printer Printing S peed 127 mm/sec Roll 38.1 ~ 106mm Paper Fan-Fold T ype 45 ~ 1 12 mm SMPS Input V oltage AC 100~240V Frequency 50/60 Hz AC Adapter SMPS Ou[...]

Rev . 1.00 - 25 - Met ap ace L-1 7-2 Certification 1) EMC & Safety S tandards • Europe: CE EMC,CB-Scheme:IE C60950-1, GS: EN60950-1: 2001 WARNING Use of an unprotected interface cable with th is printer conflicts with EMC st andards. Users should only use cables approved. 2) CE Mark • EMC Directive 89/336/EEC EN55002:1994+A1 :1995+A2:1997 E[...]