MGE UPS Systems 66102 manuale d’uso

www.mgeops.co m Net w ork Management Card (66102 & 66103) User manual ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 1/120[...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 2/120 Contents 1 MGE OFFICE PROT ECTION SYS TEMS NET WORK SOLUTION 5 1.1 G ENERAL P RESENTATION 5 1.1.1 Connecting the U PS to the Ethernet network 6 1.1.2 Protection of the co mputers/serve rs 6 1.1.3 Supervision of the UPSs over th e network 7 1.1.4 Connection 7 [...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 3/120 4.3.1 Email Notification 43 4.3.2 E-mail Message Set tings 45 4.4 C ONFIGURATION 47 4.4.1 Network settings 48 4.4.2 System 50 4.4.3 Notified A pplications 52 4.4.4 Central shutdo wn configuration 54 4.4.5 A ccess control 55 4.4.6 Date and time 57 4.4.7 Firmwa[...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 4/120 7.4 JBUS TABLE 91 7.4.1 Data for Pulsar 700 / 1000 / 1500 91 7.4.2 Data for Pulsar M 2200 / 3000 93 7.4.3 Data for Pulsar MX 4000 / 5000 / 10000 95 7.4.4 Data for Pulsar MX frame 15 / 20 97 7.4.5 Sensor data 102 7.4.6 Other data 105 8 APPENDICES 106 8.1 T ABL[...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 5/120 1 MGE Office Prote ction Sy stems Netw o rk Solution 1.1 General Presentation MGE Office Protect ion Syst ems Network Solution : provides informati on on events concerning the supp ly of power to the c omputers connec ted to y our computer network, carries ou[...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 6/120 1.1.1 Connecting the UPS to the Ethernet network This function can be performed either through net work Cards ins erted in the UPS (Net work Management Card) or through a soft ware "agent" running on a nearby PC that is called the Net work Managemen[...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 7/120 1.1.3 Supervision of the UPSs over the netw ork Depending on y our needs, y ou can either use: Your Internet bro wser to monitor ea ch UPS, as Manage ment Proxy and Management Card includes a Web server Your company ’s standard Network Management Sy stem (H[...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 8/120 1.1.4.1 How to connect UPS / agent / network: Insert the optional card in the U PS and connect the UPS to the computer network. Start the MGE Office Protection Systems UPS, then the co mputers. 1.1.4.2 Setting up the protec tion: Set up the Net work Managemen[...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 9/120 Network Management Ca rds are compatible with the "Enterprise Power Management" su pervision sy stem and with the MGE Office Protect ion Syst ems network protection sy stem. Network Shutdo wn Module Entreprise Po wer Manager Management-Pac 2 1.2.2 D[...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 10/120 1.3 Technical data 1.3.1 Hardware characteristics Dimensions Dimensions (L x l x H) 132 x 66 x 42 mm Weight (gr) 70 g Storage Storage temperature -10 ° C to 70 ° C A mbient conditions Operating temperature 0 ° C to 40 ° C A mbient humidit y 90 % RH max w[...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 11/120 1.3.4 A dminis tration Up to 50 workstat ions protected by Network Shutdo wn Modules - Central or local configurati on. Up to 5 browsers connected at t he same time (3 in SSL). ◗ Minimum reco mmended browse r versions: Internet Explorer 6.x / 7.0, Mo zilla[...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 12/120 ◗ Recording of events and measur ements in the card log ◗ Possibility of shutting down the installation in the event of a thr eshold being exceeded or on ope ning / closure of a dry contact ◗ Connection to the card with stra ight CAT5 RJ 45 network cab[...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 13/120 1.3.8 Default parameters Function Parameter Default value Possible value Network IP address 172.17.16.16 Network IP address Subnet mask 255.255.0.0 Network IP address Gateway A ddress 0.0.0.0 Network IP address BOOTP/DHCP Enabled A ctive / Deactivated Firmwa[...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 14/120 2 Installation 2.1 Unpacking and check on contents The installation kit contents: ◗ A Network Management Card (6 6102) ◗ A serial communication cable for confi guration (34003 918) ◗ Installation man ual (34003905 ) 2.2 Indications M A C addre ss[...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 15/120 Ethernet port LED Colour A ctivit y Description ACT Green ◗ Off ◗ Card not connecte d to the net work. ◗ On ◗ Card connected to the net work but without activity ◗ Flashing ◗ Port is active in receiving / transmission 100M Orange ◗ Off ◗ Port[...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 16/120 2.4 Sensor installation (option) The Environment sens or is available as a n option on the Net work Manage ment Card and is ava ilable from MGE Office Protection Sy stems (reference 66846). The sensor allo ws remote monitoring of the UPS's env ironment [...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 17/120 3 Configuration 3.1 Configure IP parameters Once the card has start ed: Connect one end of the cable (340 03918) to the Service po rt. If the environment sensor was pre viously connecte d, the card must be rest arted in order to access the conf iguration men[...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 18/120 3.1.1 Your network is equipped with a DHCP serv er The card is configure d by default with this service act ivated. The card automat ically collects IP parameters. To know the IP para meters, ty pe 2, the next menu is dis played: ----------- ----------------[...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 19/120 3.1.2 Your network is not equipped with a DHCP server In the main menu enter 2, then 2 again . The menu is d isplaye d: Follow the instruct ions and ente r the static IP para meters. A t the end of the menu, wait for t he "Done" message to be displ[...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 20/120 4 Supervision and a dministration by browser ◗ On a computer equ ipped with a Web browser (Internet Explorer , FireFox or Nets cape recommen ded), enter the address initialised previously in the Installation chapter (e. g. http://172.17 .16.16.) T he "[...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 21/120 4.2 UPS 4.2.1 UPS properties page This page is automatica lly refreshed every 10 seconds. From this page, acce ss to the m ain UPS information is available thanks to the comb o box (see s creen copy below). The different cho ices are the follo wing ones: “[...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 22/120 4.2.1.1 "UPS" zone: general information on the UPS . Indication of the picture and gene ric name of the UPS range Computer room : Customised name of your sy stem. You can change th is name on th e "System" page. UPS status icon : The vari[...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 23/120 UPS without auto matic by pass Note: In case of loss of commu nication with the UPS, all the ele ments of the sy noptic are grey . The various elements of the sy noptic are the followin g ones: ◗ A C Normal Input : In tolerances Out of tolerances ◗ A C N[...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 24/120 ◗ Battery : Remaining capacity > 50% Remaining capacity < 50% Battery to be checked (battery test result) ◗ Battery Output Flow : DC to AC convert er powered by battery DC to AC convert er not powered by battery ◗ DC to AC Converter Input flo w :[...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 25/120 ◗ A C A utomatic By pass Flow : Energy flow present No energy flow ◗ A C A utomatic By pass Status : Powered Not powered Internal failure ◗ A C Manual B y pa ss Flow : Energy flow present No energy flow ◗ A C Manual B y pa ss Status : Open Closed ◗[...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 26/120 ◗ UPS measurements : ◗ Boxes showing measurements a ppear when sy noptic elements are hovered by the pointer . See example belo w. These measurements are availa ble for AC to DC conver ter, Battery , DC to AC convert er and automatic by pass. The measure[...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 27/120 4.2.1.2 "UPS status" zone: Essential informat ion ◗ "Active source s": (available on pa rallel or modular U PS) x UPS + y UPS redundant : x indicates the m inimal number of UPS necessary to power the loa d, y indicates the number of UPS[...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 28/120 4.2.1.3 Viewing the modules ◗ Click on "UPS Modules" scroll li st to view the infor mation about the UP S modules. ◗ A ctive sources: x UPS + y UPS redundant : x indicates the m inimal number of UPS necessary to power the loa d, y indicates the[...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 29/120 ◗ The Status can take the next forms: or when the mo dule is working properly with no alarm. when the module has at least one alarm (level Warnin g) active. when the module has at least one alarm (level Critical) act ive. when the module has a communicatio[...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 30/120 4.2.1.4 Viewing the alarms Click on "A larm Table" scroll list to view the list of current alarms. T he table of managed alarms is included in the appendix . The level of the a larms appears like belo w: Critical Warning Unknown ◗ A larm table fo[...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 31/120 ◗ A larm table for modular UPS[...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 32/120 4.2.1.5 Viewing the “Abou t your UPS” windo w Click on "A bout your UPS" scroll list to view the informati on about the U PS and the card .[...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 33/120 4.2.2 On-line help On-line contextual help in Engli sh is available at the top of each page by clicking on the Help link, which is alway s located on the top r ight corner. T he navigation menu of the on-l ine help is identical t o that of the card's pa[...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 34/120 4.2.3 UPS control Click on the "UPS C ontrol" section in the menu The parameters of t his menu can on ly be modified after entering the "Log in" and "Pass word". T he following screen is proposed automat ically : The default log[...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 35/120 UPS configuration may prevent the shutdown and rest art comm ands from being pro perly run. Re ad the UPS user manual for more information. This page enables tr iggering of startup and shutdo wn sequence s for the UPS main output and c ontrolled outlets. ◗[...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 36/120 "Immediate On" : A se quence to switch on out put power is launc hed immediate ly. The output is re-powered an d the systems supplied sta rt up correct ly. "Delayed, safe po wer down": Th is is the same switch off sequence as for the &quo[...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 37/120 4.2.4 UPS weekly schedule programmi ng Click on the "Weekly schedule" section of the menu . UPS configuration may prevent the shutdown and rest art comm ands from being pro perly run. Re ad the UPS user manual for more information. The weekly sched[...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 38/120 4.2.5 Shutdown parameters This page enables v iewing and configurat ion of UPS operating parameters in battery mode and for power restorati on. Click on the "Shutdo wn paramet ers" section in the men u to see the list of parameters. When y ou tick [...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 39/120 For the main outlet ( "Master" by default) The first shutdow n criteria initiates the re start of the shutdow n sequence . ◗ If remaining ti me is under (0 to 99999 seconds, 180 by default) is the minimum re maining backup ti me from which the sh[...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 40/120 4.2.6 Measurements Click on " Meas urements " in the menu ◗ The next windo w shows the measurements for a mono phases UPS. The following measurements ar e saved and time-st amped (env. 430) : ◗ "AC Normal : Vo ltage": Value of the uti[...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 41/120 4.2.7 Event log ◗ Click on "Event Log". in the me nu ◗ "Save log" enab les all saved value s to be opened or sav ed in CSV format. (compati ble with Excel ty pe spreadsheets) ◗ "Clear log" enab les deletion of all records.[...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 42/120 4.2.8 System log ◗ Click on "System log". in the menu ◗ "Save log" enab les all saved value s to be opened or sav ed in CSV format. (compati ble with Excel ty pe spreadsheets) ◗ "Clear log" enab les deletion of all records[...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 43/120 4.3 Notification 4.3.1 Email Notification The card offers the possibility of redirecting UPS alar ms to an e-mail server. The format of thes e e-mails is compatible with mobile telephone tra nsfer sy stems using text messages (S MS).[...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 44/120 ◗ Recipient List : On the left side of t his page, up to four recipients can be configured to receive e-mails from the card. Each addressee has its o wn trigger eve nts, selected from the r ight side of the page, for which an e-mail is sent. T he card’s [...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 45/120 4.3.2 E-mail Message Se tti ngs This page enables c ustomisation of the content of the messages received by recipients of e-mails sent by the card. Customisation is c ommon to th e four recipients that can be not ified (see E-mail notificati on ). ◗ Sender[...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 46/120 The body of the e-mail sent is comp osed of: - Message text, whic h is free tex t. - The date and ti me of the event, as sav ed in the log. - URL of the card, enab ling a direc t link with the card to be established. - Atta chments, as configured fo r the e-[...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 47/120 4.4 Configuration The parameters of t his menu can on ly be modified after entering the "Log in" and "Pass word". T he following screen is proposed automat ically : The default login an d password ar e: MGEUPS Each field accepts up to 10 [...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 48/120 4.4.1 Network settings Click on "Network" in the menu. This menu enables the administ rator to configure the network para meters of the card a nd authorisation of the remote upgrade of the embe dded sy stem. ◗ IP Address : The IP address of t he [...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 49/120 parameters. If no resp onse is rec eived from the server, t he card boots with the last saved para meters from the previous start. The se parameters are those shown on the page. The default value for t his paramet er is "Enable" Note 1: If the host[...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 50/120 4.4.2 System Click on " System " in the menu. This menu enables the customis ation of the information on the UPS propert ies pages. ◗ UPS Contact: Th is text field is li mited to 49 charact ers. Enter the name of the person respo nsible for UPS a[...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 51/120 ◗ Factory Reset button: enables r estoration of the defau lt configura tion of all the card’s parameters. TCP/ IP parameters: IP addre ss, subnet mask, ga teway and BootP /DHCP value are maintained if the "Keep TCP/IP parameters" option is sele[...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 52/120 4.4.3 Notified Applications Click on " Notified Appl ications " in the menu. Security : The administrator has t o enter his/her login/pass word in order to view this informati on. This menu enables : ◗ The addition of the supervision s tations re[...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 53/120 ◗ Output: number of the UPS outp ut from which t he client is po wered. ◗ Configuration : shows where the parameters of the Net work Shut down Module come from: Local (c oming from the application) or Central (coming f rom the card). The Central sh utdow[...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 54/120 4.4.4 Central shutdown configuration Click on "Notified A pplications" in the menu, then "C onfiguration". This page is used to define eithe r the "shutdown" or the "notificat ion" settings used by the Network Shutdo w[...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 55/120 4.4.5 A ccess control Click on " Acces s Control " in th e menu. To access this page , the login a nd password are sy stematically requested if they have not already been entered. This menu enables co nfiguration of the different paramete rs enabli[...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 56/120 ◗ SSL A ccess: When selected, acce ss to the Web interf ace is made in secure mode (https). Connections with Network Shutdo wn Modules stay in standard mode (secure TCP) SSL Security Implementation: SSL     version 3.0 TLS     versi[...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 57/120 4.4.6 Date and time Click on " Date and Time " in the menu . This menu enables initialisation of the date and time of the card in three diff erent way s. The date format is a lway s of y ear/month/day type ◗ Set manually : Enables initialisat ion[...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 58/120 ◗ Sy nchronize with NTP server: E nables connection with a time se rver, either available on the company ’s internal network or on the Web. This ser ver communicates G MT time. The IP ad dress or hostna me of the time serv er must be entered, and the ti [...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 59/120 4.4.7 Firmware upload Click on " Firmware Upload " in t he menu. This menu enables a new firm ware version to be up loaded To upload a ne w version of the card's firmware, se lect the file t o be loaded using the "Browse …" button [...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 60/120 4.5 Environment Sensor (option ) The environment sens or (66846) is an o ption that enables te mperature and humidity to be measured, and indication of the position of t wo external cont acts. It is connected with a standard net work cable to the Ca rd Setti[...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 61/120 4.5.2 Environment Status For both measure ments, a graduate d gauge proposes the following functio ns: The cursor indicates the current value. Two red zones to the left and rig ht represent the high and low th resholds that can be set on the Environment Sett[...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 62/120 4.5.3 Environment Settings The environment sens or measur es temperature, hum idity and gives the status of the 2 contacts (use d for door, alar ms or generator unit). The temperature an d humidity thresholds can be adj usted and ca n trigger notification an[...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 63/120 Hysteresis must be se t to preve nt multiple notificat ions if humidity fluctuates around a threshold. The default value is 5%. The high alarm disappea rs when the va lue drops belo w the High thresho ld - Hyst eresis value The low alarm d isappears when the[...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 64/120 4.5.4 Log The two environ ment sensor measure ments: Temperature and Humidity are recorded at an int erval defined by the Environment log interv al in the System settings pa ge. By default, this peri od is 300 seconds. Each measurement is dated and st ored i[...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 65/120 5 Server protection 5.1 Set-up of the shutdown pa rameters The Network Shut down Module, on protected server boot, subscribes itself automatically to notified applications list and sends its essent ial data: ◗ IP Address or hostname of the se rver on which[...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 66/120 Start of the shutdo wn sequence Delay before shutdown Utility fa ilure Remaining autono my 100% Shutdown after : If remaining time und er UPS Shut off Card param eters UPS parameters Shutdown duration Battery capacity 0% Shutdown if remainig capacity under t[...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 67/120 5.1.1.3 Shutdown when backu p time is less than When the Network Management Card detec ts that the percent age of backu p time remaining is less than the value set, the shutdown seq uence is started. 5.1.1.4 Shutdown duration Duration (in seconds) required f[...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 68/120 5.1.2 Controlled outlets Certain UPS mode ls are equippe d with controlled out lets (generally 2) which are alway s dependant on the U PS's main outlet. Shutdown of the main outlet sys tematically caus es shutdown of the pro grammable outlet s. The foll[...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 69/120 5.1.3.2 Sequential startup It is possible to de lay outlet po wer-on to reduce inrus h currents on startup or to sequence the sta rtup of several devices. Controlled outlet star tup after a given t ime is based on sta rtup of the ma in outlet. 5.2 The differ[...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 70/120 Shutdown duration Start shutdown main output Utility failure Utility Battery c apacity under : NSM 2 on output 1 NSM 1 on main output Main output Utility restor e Start shutdown output 1 Output 1 Shutdown duration output 1 Battery capacity under : (output 1)[...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 71/120 5.3 Shutdown management with 2 NMC bo ards Certain UPS can have 2 NMC bo ards in order to: ◗ Increase the nu mber of protecte d servers, ◗ Protect 2 groups of server conne cted to different net works physically separate d. 5.3.1 Shutdown Duration A s des[...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 72/120 6 Configuration via R S232 ◗ Use the cord supp lied with the c ard. ◗ Connect the card to a computer equipped with a hypert erminal ty pe emulator. The serial link mu st be set at 9600 baud, 8 bits, no parity, 1 stop bit , and without flo w control. ◗ [...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 73/120 6.1 Choice 1: Restart / Reset Use this function to restart the c ard; two choices are possible 1 : Hardware Reset: Equivalent to a rest art of the elect rical power supp ly. 2 : Restart applicat ion: Restarts only the application part . ----------- ---------[...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 74/120 6.2.2 Choice 2: Modif y Network settings Enables the modificat ion of network parameters For each of the fol lowing questions, y ou can press <Return> to se lect the value shown in braces, or you can ent er a new value. Should this target obtain IP set[...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 75/120 6.3 Choice 3: Lost password / Set Login Pa ssw ord to Default In the even the login or password is lost, choice 3 enab les the return to the default pass word: ----------- ------------------------- --------------------- -------------------- MGE UPS SYST EMS [...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 76/120 6.4 Choice 4: Return to Default Configuration Enables restoratio n of the default confi guration of all the card’s paramet ers ----------- ------------------------- --------------------- -------------------- MGE UPS SYST EMS NETWORK MA NAGEMENT CA RD -----[...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 77/120 7 Industrial Net w o rk Management Car d (INMC option) 7.1 Presentation 7.1.1 Overview 7.1.2 Functions The Industrial Net work Manage ment Card (INMC) provides the same functions tha n the NMC card desc ribed in the previous section of this docume nt. The ad[...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 78/120 7.1.3 Technical characteristics Functions Parameters Default values Possible values JBUS/MODBUS communication - Baud rate - Parity - Slave number - 9600 bauds - without parity - Slave nr 1 - 1200, 2400, 4800 , 9600 - Without parity , even parity - 1 to FF (h[...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 79/120 7.2 Installation 7.2.1 RS232 link configuration and c onnection Set the SA2 switches like below: The next figure sho ws the detail s of the connection in RS232 mode: Pin number Function 1 Received data (input) 2 Not connected 3 Transmitted data (o utput) 4 N[...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 80/120 7.2.2 RS485 link configuration and c onnection 7.2.2.1 RS485 connection La liaison EIA RS485, en 2 fils o u en 4 fils, doit être po larisée en un point unique de la ligne et a daptée aux deux extrémités de cett e ligne pour un fonct ionnement cor rect A[...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 81/120 The settings of the RS485 link ar e made through the SA 1 switches: SA1 description: 1: reserved 2: reserved 3: link termination between T- to R- (2 wires conf iguration) if set to ON 4: connection T- to R- (2 wires configurat ion) if set to ON 5: connection[...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 82/120 7.2.2.2 RS485 link configura tion for 2 wires connexion Set the SA2 switches like below to set the RS485 mode : Set the SA1 switches to select t he two wires config uration with no ter mination:[...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 83/120 Set the SA1 switches to select t he two wires config uration with t ermination: The next figure gives a ty pical bus structure in the two wires co nfiguration:[...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 84/120 7.2.2.3 RS485 link configura tion for 4 wires connexion Set the SA2 switches like below: Set the SA1 switches to select t he four wires confi guration with no termination:[...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 85/120 Set the SA1 switches to select t he four wires confi guration with termination: The next figure gives a ty pical bus structure in the four wires co nfiguration:[...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 86/120 7.2.3 Configuration of the JBUS/MODBUS communication parame ters ◗ Use the cord supp lied with the c ard. ◗ Connect the card to a computer equipped with a Hy per terminal type emulator. The serial link must be set at 9600 baud, 8 bits, no parity , 1 stop[...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 87/120 ◗ The next menu appears : ----------- ------------------------- --------------------- -------------------- MGE UPS SYST EMS NETWORK MA NAGEMENT CA RD ----------- ------------------------- --------------------- -------------------- 1 : Reset 2 : Network con[...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 88/120 Setting Jbus config uration : Set Slave number : 0x7 Set the Baud Rate [1 : 38400, 2: 19200, 3: 9600, 4: 480 0, 5: 2400, 6: 1200] :3 Set data format [1 : 8 bits, 2: 7 bits ] :1 Set stop bit [1: 1 b its, 2: 2 bits] :1 Set Parity [1: None, 2: Even, 3: Odd] :1 [...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 89/120 7.2.3.6 Choice 6: Display Jbus frames Enables the disp lay of the Jbus frames: Recv : 01 01 00 00 00 64 3d e1 Send : 01 81 02 c1 91 Recv : 01 03 00 62 00 64 e5 ff Send : 01 03 c8 00 00 00 00 00 00 00 00 00 00 00 00 00 . .. Recv : 01 01 00 00 00 64 3d e1 Send[...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 90/120 7.3 Additional Web pages The INMC card Jbus parameters coul d be set through the next pa ge:[...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 91/120 7.4 JBUS table 7.4.1 Data for Pulsar 700 / 1000 / 1500 7.4.1.1 Status table Status description Status to 0 Status to 1 Word (hex) Bit Load protected no y es 40 0 UPS coupled no y es 40 1 Unit general alarm no y es 40 2 UPS in backup no y es 40 4 Battery low [...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 92/120 7.4.1.2 Measurements tab le Description of the physical qua ntity Word (hex) Unit I output 109 A U output 124 V U battery 12D V Output active po wer 136 W Output apparent po wer 137 VA % output load level 139 % Power factor (Cos PH I) 13D - Mains 1 frequency[...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 93/120 7.4.2 Data for Pulsar M 2200 / 3000 7.4.2.1 Status table Status description Status to 0 Status to 1 Word (hex) Bit Load protected no y es 40 0 UPS coupled no y es 40 1 Unit general alarm no y es 40 2 UPS in backup no y es 40 4 Battery low warning no y es 40 [...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 94/120 7.4.2.2 Measurements tab le Description of the physical qua ntity Word (hex) Unit I mains 2 106 A I output 109 A U mains 2 11E V U output 124 V U battery 12D V Output active po wer 136 W Output apparent po wer 137 V A % output load level 139 % Power factor x[...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 95/120 7.4.3 Data for Pulsar MX 4000 / 5000 / 10000 7.4.3.1 Status table Status description Status to 0 Status to 1 Word (hex) Bit Load protected no y es 40 0 UPS coupled no y es 40 1 Unit general alarm no yes 4 0 2 UPS in backup no yes 40 4 Battery low warning no [...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 96/120 7.4.3.2 Measurements tab le Description of the physical qua ntity Word (hex) Unit I mains 1 10 0 A I mains 2 10 6 A I output 109 A I battery 10E A U mains 2 11 E V U output 124 V U battery 12D V Output active po wer 136 W Output apparent po wer 137 VA % outp[...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 97/120 7.4.4 Data for Pulsar MX frame 15 / 20 7.4.4.1 Status table Status description Status to 0 Status to 1 Word (hex) Bit Load protected no y es 40 0 UPS coupled no y es 40 1 Unit general alarm no y es 40 2 UPS in backup no y es 40 4 Battery low warning no y es [...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 98/120 7.4.4.2 Modular fault table Description du Status Status to 0 Status to 1 Word (hex) Bit General alarm A bsent Present 61 0 Fan failure A bsent Present 61 1 Internal communicati on fault A bsent Present 61 2 Inverter thermal overload A bsent Present 61 3 Inv[...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 99/120 Description du Status Status to 0 Status to 1 Word (hex) Bit General alarm A bsent Present 65 0 Fan failure A bsent Present 65 1 Internal communicati on fault A bsent Present 65 2 Inverter thermal overload A bsent Present 65 3 Inverter fault A bsent Present [...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 100/120 7.4.4.3 Measurements tab le Description of the physical qua ntity Word (hex) Unit I1 (I phase 1) mains 1 100 A I2 (I phase 2) mains 1 101 A I3 (I phase 3) mains 1 102 A I1 (I phase 1) mains 2 106 A I2 (I phase 2) mains 2 107 A I3 (I phase 3) mains 2 108 A I[...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 101/120 Description of the physical qua ntity Word (hex) Unit U mains 1 (phase 1) 150 V U mains 1 (phase 2) 151 V U mains 1 (phase 3) 152 V Nominal voltage of battery element 213 V[...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 102/120 7.4.5 Sensor data 7.4.5.1 Status table Status description Status to 0 Status to 1 Word (hex ) Bit Input 1 alarm no y es 45 5 Input 2 alarm no y es 45 6 A larm : hum idity too low no yes 45 4 A larm : hum idity too high no y es 45 3 A larm : temperatu re too[...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 103/120 7.4.5.2 Measurements tab le Description of the physical qua ntity Word (hex) Unit Temperature measure 180 ° C / ° F Maximum temperat ure 181 ° C / ° F Maximum temperat ure date (MSB) in Unix timestamp 182 Maximum temperat ure date (LSB ) in Unix timesta[...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 104/120 7.4.5.3 Read of the personal ization table Description Wor d (hex) Unit High threshold te mperature (° C) 32C 0 Low threshold tem perature (° C) 32D 0 Temperature hy steresis (° C) 32E 0 Offset temperature 32F 0 High threshold hum idity (%) 330 0 Low thr[...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 105/120 7.4.6 Other data Information descri ption Word (hex) Example Manufacturer name 1A0 « MGE Office Protecti on Systems » Product name 1A8 « Pulsar » UPS model 1B0 « 700 » Serial number 1B8 « AN2E4900 8 »[...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 106/120 8 Append ices 8.1 Tables of alarms and events 8.1.1 Table of alarms List of time dated alarms Alarm on A larm o ff Battery fuse blown Battery fuse OK No Battery Battery present Battery temperature fault Ba ttery temperature OK Battery charger fault Battery [...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 107/120 Inverter overload Inverte r load OK Inverter over temperature Inverter tem perature OK Inverter short circu it Inverter OK Inverter thermal overload Inverter load OK Load not protect ed - On A utomatic By pass Load protected - Return fro m By pass Load shor[...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 108/120 If the UPS is modular UPS, for eac h module: Battery fuse blow n Battery fuse OK No Battery B attery present Battery temperature fault Battery temperature OK Battery charger fault B attery charger OK Low battery Battery OK Charger temperat ure fault Charger[...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 109/120 Positive DC bus too low Positive DC bus OK Output switch (Q5N) open Output switch (Q5N) closed Normal AC NOK Normal A C OK UPS on battery UPS on normal A C UPS overload UPS returns to nor mal load UPS overtemperature UPS temperature OK Fan fault Fan OK UPS [...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 110/120 Inverter fault Inverter OK Inverter overload Inverter load OK Inverter overtempera ture Inverter temperat ure OK Inverter short circu it Inverter OK Inverter thermal overload Inverter load OK Output switch (Q5N) open Output s witch (Q5N) closed Load short c[...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 111/120 8.1.3 Table of system alarms Network Management Ca rd startup Send test mail SUCC ESS Send test mail ERROR Send mail to <rec ipient> ERROR <Sensor name> Co mmunication failure <Sensor name> Co mmunication rest ored Firmware upgraded Connec[...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 112/120 8.2 SNMP objects 8.2.1 MGE MIB The NMC card imple ment reduc e MGE Office Protecti on Sy stems MIB, with the objects bellow ma naged. The entire MIB descr iption is ava ilable on www.mgeops .com area “ Do wnloads – Soft ware Download . Le chemin d’acc[...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 113/120 mgoutputFrequency _1 deciHz {7,2,1,3,1,0} mgoutputFrequency _2 deciHz {7,2,1,3,2,0} mgoutputFrequency _3 deciHz {7,2,1,3,3,0} mgoutputLoadPerP hase_1 % {7,2,1,4,1,0} mgoutputLoadPerP hase_2 % {7,2,1,4,2,0} mgoutputLoadPerP hase_3 % {7,2,1,4,3,0} mgoutputCur[...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 114/120 If the Environment Sensor is det ected , the follo wing informatio n are managed. upsmgEnvironA mbientTemp 0.1 degré {8, 1,0} upsmgEnvironA mbientHumidity 0.1 % {8,2,0} upsmgEnvironmentN um {8,6,0} upsmgEnvironmentI ndex {8,7,1,1,1 } upsmgEnvironmentC omFa[...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 115/120 8.2.2 Table des TRAPS : (1.3.6 .1.4.1.705.1.11) SNMP traps are sent when alar ms appears and desappea rs. Level : 1:informat ional , 2:major, 3 :critical MIB TRA P Trap # Leve l -upsmgBattery Fault Trap 1 Level 3 -upsmgBattery OK Trap 2 Leve l 1 -upsmgA tLo[...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 116/120 - upsEnvironment Input1Open Trap 62 Level 2 - upsEnvironment Input2Open Trap 64 Level 2 - upsEnvironment Input2Closed Trap 63 Level 2 The level is used to se lect traps t o be sent to the supervis or. This adj ustment is availab le from the “Not ified app[...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 117/120 9 Glossary Bootp: Protocol based on UDP used to allocate an IP address correspondin g to an Ethernet card during the startup phase. Defined by the RCF 951 Community name: A ccess key to access SNMP age nt information DHCP Dy namic Host Configuration Protoc [...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 118/120[...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 119/120 NMS NET WORK MANA GEMENT STATION (SNMP) The dedicated PC or workstation is used on the company ’s networks to a dministrate all device s connected t o the network. Data are transmitted using the SNMP protocol . Popular N MS systems include HP OpenView, IB[...]

ENERGIZE YOUR ENTERPRISE Network Management Ca rd – User Manual 34003991EN/DA Page 120/120 programmed to perform specific tasks upon recepti on of the traps.[...]