Mitsubishi Electronics 125 manuale d’uso

Air-Conditioners PEAD-RP71, 100, 125, 140JAA English OPERA TION MANUAL For safe and correct use, please read this oper ation manual thoroughly before opera t ing the air-conditioner unit. FOR USER English KD79D904H01_Cover.fm Page 1 Friday, October 14, 2011 9:58 AM[...]

2 Contents s Before operating the unit, make sure you read all the “Safety precautions”. s “Safety precautions” lists important points about safety . Please be sure to follow them. Symbols used in the text W arning: Describes precautions that should be observed to avoid the risk of injury or death to the user . Caution: Describes precaution[...]

3 2. Parts Names ■ Indoor Unit PEAD-RP · JAA Fan steps 3 steps V ane – Louver – Filter Normal Filter cleaning indication – 1.2. During operation Caution: • Do not use any sharp object to push the buttons, as this may damage the remote controller . • Do not twist or tug on the remote controller cord as this may damage the remote control[...]

4 ■ Wired Remote-Controller (P AR-21MAA option) Display Section For purposes of this explanation, all parts of the display are shown as lit. During actual operation, only the relevant items will be lit. ˚ F ˚ C ˚ F ˚ C ERROR CODE AFTER TIMER TIME SUN MON TUE WED THU FRI SAT ON OFF Hr AFTER FILTER FUNCTION ONLY1Hr. WEEKLY SIMPLE AUTO OFF Ident[...]

5 1 2 3 ■ Wireless Remote-Controller (option) 2. Parts Names ■ When using the wireless remote controller , point it towards the receiver on the indoor unit. ■ If the remote controller is operated within approximately two minutes after power is supplied to the indoor unit, the indoor unit may beep twice as the unit is performing the initial au[...]

6 AAA AAA CLOCK CHECK RESET SET TEST RUN MODE FAN VANE LOUVER min h AUTO START AUTO STOP ON/OFF TEMP 1 2 5 6 3 3 5 6 2 Note: The day and time will not appear if clock use has been disabled at Function Selection of remote controller . 3. Screen Configuration <Screen T ypes> For details on setting the language for the remote controller display [...]

7 ■ Because the room temperature is automatically adjusted in order to maintain a fixed effective temperature, cooling operation is performed a few degrees warmer and heating operation is performed a few degrees cooler than the set room temperature once the temperature is reached (automatic energy-saving operation). 5.3. T emperature setting s s [...]

8 5. Operation 6.1. For Wired Remote-controller (option) Y ou can use Function Selection of remote controller to select which of three types of timer to use: 1 Weekly timer , 2 Simple timer , or 3 Auto Off timer . 6.1.1. Weekly T imer ■ The weekly timer can be used to set up to eight operations for each day of the week. • Each operation may con[...]

9 6. T imer 6.1.2. Simple Timer ■ You can set the simple timer in any of three ways. • Start time only: The air conditioner starts when the set time has elapsed. • Stop time only: The air conditioner stops when the set time has elapsed. • Start & stop times: The air conditioner starts and stops at the respective elapsed times. ■ The s[...]

10 6. T imer 7. After completing steps 3 to 6 above, press the Filter button 4 to lock in the value. Note: Y our new settings will be cancelled if you press the Mode (Return) button 2 before pressing the Filter button 4 . 8. Press the Mode (Return) button 2 to return to the standard control screen. 9. Press the Timer On/Off button 9 to start the ti[...]

11 AAA AAA CLOCK CHECK RESET SET TEST RUN MODE FAN VANE LOUVER min h AUTO START AUTO STOP ON/OFF TEMP 13 2 D A C B 6. Timer <Checking the Current Auto Off Timer Setting> 1. Be sure that the “ Auto Off ” is visible on the screen (at 1 ). 2. Hold down the Timer Menu button B for 3 seconds , so that “ Monitor ” is indicated on the screen[...]

12 7. Other Functions ON/OFF ERROR CODE If you have entered contact number to be called in the event of a prob- lem, the screen displays this number . (Y ou can set this up under Func- tion Selection of remote controller . For information, refer to section 8.) Indoor Unit ’ s Refrigerant Address Error Code Indoor Unit No. Alternating Display ON/O[...]

13 8. Function Selection [Function selection flowchart] Setting language (English) OFF on1 on2 OFF ON OFF ON OFF OFF CALL- ON OFF ON OFF ° C ° F PAR-21MAA ON/OFF FILTER CHECK OPERATION CLEAR TEST TEMP. MENU BACK DAY MONITOR/SET CLOCK ON/OFF F E G C D H B A I G G G G G G E E G G G G G E G E G G G G G G D D D D D D D D D D D D D D D D D D D D D D D[...]

14 8. Function Selection [Detailed setting] [4] – 1. CHANGE LANGUAGE setting The language that appears on the dot display can be selected. • Press the [[ MENU] button G to change the language. 1 English (GB), 2 German (D), 3 Spanish (E), 4 Russian (RU), 5 Italian (I), 6 Chinese (CH), 7 French (F), 8 Japanese (JP) Refer to the dot display table.[...]

15 8. Function Selection [Dot display table] W aiting for start-up Operation mode Cool Dry Heat Auto Auto(Cool) Auto(Heat) Fan V entilation Stand by (Hot adjust) Defrost Set temperature Fan speed Not use button Check (Error) T est run Self check Unit function selection Setting of ventilation Selecting language English Germany Spanish Russian Italy [...]

16 s s s s s Cleaning the filters • Clean the filters using a vacuum cleaner . If you do not have a vacuum cleaner , tap the filters against a solid object to knock off dirt and dust. • If the filters are especially dirty , wash them in lukewarm water . T ake care to rinse off any detergent thoroughly and allow the filters to dry com- pletely b[...]

17 1 1. T rouble Shooting Having trouble? Air conditioner does not heat or cool well. When heating operation starts, warm air does not blow from the indoor unit soon. During heating mode, the air conditioner stops before the set room tem- perature is reached. When the airflow direction is changed, the vanes always move up and down past the set posi[...]

18 1 1. T rouble Shooting Having trouble? Here is the solution. (Unit is operating normally .) Noise is louder than specifications. Nothing appears in the wireless remote controller display , the display is faint, or signals are not received by the indoor unit unless the remote con- troller is close. The operation lamp near the receiver for the wir[...]

19 KB79U748H01_EN.pm65 2011.10.18, 11:54 AM 19[...]

KD79D904H01 Please be sure to put the cont act address/telephone number on this manual before handing it to the customer . HEAD OFFICE : TOKYO BLDG ., 2-7-3, MARUNOUCHI, CHIYODA-KU, TOKYO 100-8310, JAP AN KD79D904H01_Backcove r.fm Page 24 Fr iday, October 14, 2011 9:47 AM[...]