Mitsubishi Electronics Diamond Plus 92 manuale d’uso

USER’S GUIDE For future reference, record the serial number of your display monitor in the space below: SERIAL No. The serial number is located on the rear cov er of the monitor . A UT O-SCANNING WITH DIGIT AL CONTROL COLOR DISPLA Y MONITOR Internet Home Page: http://www.mitsubishi-electric.com.au/ Supplying Windows ® 95/98/2000 INF File do wnlo[...]

- ii -[...]

- iii - ENGLISH RADIO INTERFERENCE REGULATIONS STATE- MENT FOR U.S.A. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interfer- ence in a residential installation. This equipment gener- at[...]

- iv - Congratulations! You have just purchased a TCO’99 approved and labelled product! Your choice has provided you with a product developed for professional use. Your purchase has also contributed to reducing the burden on the environment and also to the further development of environmentally adapted electronics products. Why do we have environ[...]

- 1 - ENGLISH CAUTION The power cord provided with this monitor is de- signed for safety and must be used with a properly grounded outlet to avoid possible electrical shock. Do not remove the monitor cabinet as this can expose you to very high voltages and other hazards. Trademark IBM, PC, PS/2, PS/V, Personal System/2 are registered trade- marks o[...]

- 2 - 1 1 INTRODUCTION Congratulations on your purchase of this high resolution colour monitor. We designed this monitor to provide you with years of reliable trouble-free operation. This guide tells you how to connect, adjust and care for your monitor. This guide also provides technical specifications and instructions for troubleshooting any basic[...]

- 3 - ENGLISH 1.3 Power Management Function The monitor has a power management function which reduces the power consumption of the monitor when not in use. The power saving mode is invoked by a VESA DPMS- compliant computer. Check your computer's manual for setting this function. 1.4 DDC The monitor includes the VESA DDC1 and DDC2B feature. DD[...]

- 4 - Connect the colour monitor and computer with the necessary cords and cables. 1.9 Quick Operation Chart To summarize the steps in connecting your computer with the colour monitor and setting the necessary controls and switches, refer to the chart below. See Section 3. INSTALLATION AND CONNECTION Turn on the computer. Turn on the colour monitor[...]

- 5 - ENGLISH FPM OSD OFF − ＋ 4 2.1 Control Names See Figures 3 and 4 for the location of the user controls, indicator and connectors. Each part is identified by number and is described individually. REAR 2 2 P AR T NAME FRONT Figure 3 6. AC POWER CONNECTOR 7. SIGNAL INPUT CONNECTOR: DB9-15P Figure 4 2.2 Function 1. POWER SWITCH: A push-o[...]

- 6 - 3.2.2 Connecting to An Apple Macintosh Computer Figure 6 shows the signal cable and AD-A205 Adapter (option) to the video port in an Apple Macintosh. The Macintosh Adapter is available that converts the 2 row D-sub video connector on legacy Macintosh computers to a 3 row D-sub(VGA) connector compatible with your Mitsubishi monitor. The Macint[...]

- 7 - ENGLISH 4 4 OSD (On Screen Display) FUNCTIONS The monitor has an OSD(On Screen Display) function. The following procedure shows how to adjust the screen using the OSD function. 4.1 How to adjust the screen If you don't press a button during the time set by "OSD TURN OFF", the OSD will turn off automatically. FPM OSD OFF − [...]

- 8 - T o decrease the contrast. T o increase the red color level. T o rotate the image counterclockwise. T o restore to factory preset level. T o increase the contrast. T o increase the blue color level. T o move the image down. T o move the image up. CONTRAST BRIGHT COLOR COLOR TEMPERA TURE F ACTOR Y PRESET HORIZ-SIZE HORIZ-POSITION VERT -SIZE VE[...]

- 9 - ENGLISH T o adjust the purity condition on the top-left corner . T o adjust the purity condition on the top-right corner . T o adjust the horizontal beam alignment on the full screen area. CORNER PURITY(TL) CORNER PURITY(TR) CORNER PURITY(BL) CORNER PURITY(BR) MOIRE CANCEL LEVEL CLAMP PULSE POSITION F ACTOR Y PRESET HORIZ-CONVERGENCE VERT -CO[...]

- 10 - Black vertical lines are visible on the screen. PROBLEM ITEMS TO CHECK Before calling your Authorized Product Support, please check that the items below are properly connected or set. In case of using a non-standard signal, please check the pin assignments and the signal timing of your computer with the specification outlined in Section 6. S[...]

- 11 - ENGLISH PROBLEM ITEMS TO CHECK LOCATION • • Two fine horizontal lines are visible on the screen. The 2 very faint thin lines across the screen are normal. They are caused by the aperture grille stabilization filaments(Damper Wires) which are required for all aperture grille CRTs’. A buzzing sound when power on. A brief vibration or hum[...]

- 12 - Size 50cm/19" (458mm/18" Viewable Image Size) Mask type Aperture grille Gun In-line Deflection angle 90 ° CRT Phosphors Red, Green, Blue EBU (medium short persistence) Aperture grille pitch 0.25-0.27mm (variable) Face Plate Anti-glare, Anti-reflection and Anti-static film Focusing method Dynamic Beam Forming (DBF) Video 0.7V analo[...]

- 13 - ENGLISH 7.1 Optional Macintosh Adapter AD-A205 settings The AD-A205 Macintosh Adapter(option) allows you to take an advantage of the built in video capabilities of your Macintosh computer with the monitor. (1) Set the dip switches of the adapter, before connect- ing to the computer. Apple Macintosh Switch ON Switch Setting 2,4 Macintosh LC, [...]

- 14 - (3) “AD-A205 Mac Adapter Setting Chart” shows all available modes for Macintosh systems and all possible combinations with the monitor. We recommend that you use the monitor with a preset timing. (See Section 1.2 Internal Preset Memory Capability) (4) Please refer to the instruction book of your computer about the resolution setting. Res[...]

- 15 - ENGLISH IMPORTANT Please keep this Warranty in a safe place. It is valuable. The benefits conferred by this Warranty are in addition to all other rights and remedies in respect of the product which the consumer has under the Trade Practices Act and similar State and Territory Laws. 8 8 W ARRANTY MITSUBISHI PC and GRAPHIC MONITORS 3 YEAR WARR[...]

- 16 - b) the product is damaged by the use of a consumable which is not supplied by Mitsubishi Electric Australia or its recognised retailer and which consumable is not of an equivalent standard and quality . c) the product is damaged by exhausted, leaking or used batteries or fails to function correctly as a result of the use of such batteries. d[...]

- 17 - ENGLISH IMPORT ANT NOTICE This recycle symbol may appear on packaging material or components of this product. This symbol is a mandatory requirement in some countries and does not necessarily indicate that the material can be recycled in Australia. The Plastic Identification Code (numbers 1 to 7 in a “ chasing arrows triangle ” ) may als[...]

CP871C214A10 Declaration of Conf ormity - United States only Product Name: 19 in. (50cm) Color Displa y Monitor T ype: NFK9905STTFW Brand Name: MITSUBISHI This device complies with P ar t 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this de vice must accept an[...]