Mitsubishi MDT402S manuale d’uso

1-1 User's Manual USER’S MANUAL MANUEL UTILISA TEUR MANUAL DEL USUARIO[...]

1-2 English-1 English Impor tant Information ..................................................................................................... English-2 Safety Precautions , Maintenance & Recommended Use .............................................. English-4 Contents ........................................................................[...]

1-3 English-2 DECLARA TION OF CONFORMITY This device complies with P ar t 15 of FCC Rules. Operation is subject to the f ollowing two conditions. (1) This de vice ma y not cause harmful interference, and (2) this de vice must accept any interf erence received, including interf erence that may cause undesired operation. U.S. Responsible Party: Mitsu[...]

1-4 English-3 English We hereb y cer tify that the color monitor MDT402S (L404G6) / MDT461S (L464G7) is in compliance with Council Directive 73/23/EEC: – EN 60950-1 Council Directive 89/336/EEC: – EN 55022 – EN 61000-3-2 – EN 61000-3-3 – EN 55024 and marked with Mitsubishi Electric Cor poration 2-2-3, Marunouchi, Chiyoda-K u T okyo 104-83[...]

1-5 English-4 FOR OPTIMUM PERFORMANCE, PLEASE NO TE THE FOLLOWING WHEN SETTING UP AND USING THE MDT402S / MDT461S LCD COLOR MONIT OR: • DO NO T OPEN THE MONITOR . There are no user serviceable par ts inside and opening or removing cov ers may e xpose you to dangerous shoc k hazards or other risks. Refer all servicing to qualified service personne[...]

1-6 English-5 English Contents P ower Cord f or EU User’ s Manual Video Signal Cable (D-SUB to D-SUB Cable) Wireless Remote Control and AA Batteries Clamper x 3 CD-ROM Ferrite Core x 2 Band x 2 Thumbscrew for stand x 2 Stand for the Independence x 2 Screw (M4 x 8) x 4 Main switch co ver P ower Cord f or North Amer ica Speaker Plug x 1set (Require[...]

1-7 English-6 EXIT MUTE INPUT 8 1 2 3 4 5 6 7 EXIT MUTE INPUT 9 10 7 DO WN ( ) button Activates the OSD menu when the OSD men u is turned-off. Acts as button to mo ve the highlighted area down to select the adjustment with OSD menu. 8 EXIT button Activates the OSD menu when the OSD men u is turned-off. Acts as EXIT button to mov e to pre vious menu[...]

1-8 English-7 English T erminal Panel 1 AC IN connector Connects with the supplied power cord. 2 RGB 1 IN (D VI-D) T o input digital RGB signals from a computer or HDTV device ha ving a digital RGB output. * This connector does not suppor t analog input. 3 RGB 2 IN (mini D-Sub 15 pin) T o input analog RGB signals from a personal computer or other R[...]

1-9 English-8 1 PO WER button Switches the power on/off . * If P ower Indicator is not glo wing, then no controls will work. 2 INPUT button Selects from input signal, [RGB1], [RGB2], [RGB3], [D VD/HD], [VIDEO] and [VIDEO<S>]. [VIDEO<S>] is enabled b y selecting the “SEP ARA TE” mode in the OSD or by ha ving the “S VIDEO” cable c[...]

1-10 English-9 English 30 30 P oint the top of the remote control toward the LCD monitor’ s remote sensor during button operation. Use the remote control within a distance of about 7 m/23 ft. from the front of the LCD monitor’ s remote control sensor and at a horizontal and vertical angle of within 30° within a distance of about 3 m/10 ft. Ope[...]

1-11 English-10 Setup Pr ocedure Screw Clamper Screw hole f or clamper 1. Determine the installation location CA UTION: DO NO T A TTEMPT T O INST ALL THE LCD MONITOR BY Y OURSELF . Installing your LCD displa y must be done by a qualified technician. Contact your dealer f or more information. CA UTION: MO VING OR INST ALLING THE LCD MONIT OR MUST BE[...]

1-12 English-11 English Stand Thumbscrews Speaker terminal How to use the attached speaker plug Standard cable Speaker plug Striped wire of standard cable is put into the speaker plug with pushing lev er , like a current connector . Fixed cab le and speaker plug. Inser t the fixed cab le and speaker plug to the speak er ter minal. 13. When using ex[...]

1-13 English-12 4. T o av oid falling down F asten the LCD monitor to wall using a cord or chain, which is sufficient to suppor t the weight of the LCD monitor (approx. MDT402S: 29.0kg / MDT461S: 32.8kg). Before mo ving the LCD monitor , the cord or chain should be remov ed. 5. T o prevent the main power s witch from being changed T o prevent the a[...]

1-14 English-13 English Attaching the Ferrite Core Attach the Ferrite Core to PC Audio Cab le. Use of the cable without mounting the ferrite core will result in the occurrence of noise. Mounting Position of Ferrite Core For PC A udio Cable Open the ferrite core and clamp it on the PC Audio cable . 1 2 Close the ferrite core. Ferrite core Attach the[...]

1-15 English-14 Connecting a P ersonal Computer Connecting your computer to y our LCD monitor will enable you to displa y your computer’ s screen image. Some video cards may not displa y an image correctly . Connect the LCD Monitor to a P ersonal Computer • T o connect the RGB 2 IN connector (mini D-sub 15 pin) on the LCD monitor , use the supp[...]

1-16 English-15 English LCD monitor Equipment with a digital interface such as a personal computer with RGB output (TMDS) D VI-D connector D VI-D connector T o D VI output Connections can be made with equipment that is equipped with a digital interface compliant with the D VI (Digital Visual Interface) standard. Connect the LCD Monitor to a Compute[...]

1-17 English-16 LCD monitor BNC x 3 D VI-D connector Connecting your D VD player to y our LCD monitor will enable y ou to display D VD video. Refer y our D VD player user’ s manual f or more information. Connect the LCD Monitor to a D VD Play er • T o connect the D VD/HD IN connector (BNC) on the LCD monitor , use a separately available BNC con[...]

1-18 English-17 English Y ou can connect your stereo amplifier to your LCD monitor . Refer to your amplifier o wner’ s manual for more inf ormation. Connect the LCD Monitor to a Stereo Amplifier • T urn on the LCD monitor and the amplifier only after all connections have been made. • Use an RCA cab le to connect the A UDIO OUT connector (RCA)[...]

1-19 English-18 Basic Operation P ower ON and OFF Modes The LCD monitor power indicator will turn green while powered on, or red when in off mode . The monitor can be powered on or off using the follo wing three options: 1. Pressing the power b utton. Note: Before pressing the po wer button, be sure to turn on the Main P ower Switch on the LCD moni[...]

1-20 English-19 English P ower Indicator Using P ower Mana gement The LCD monitor follo ws the VESA approved DPM P ower Management function. The power management function is an energy sa ving function that automatically reduces the power consumption of the display when the k eyboard or the mouse has not been used for a fix ed period. The power mana[...]

1-21 English-20 OSD (On-Screen-Displa y) Contr ols Hint Main-Menu PICTURE Sub-Menu Adjusts the over all image and background screen brightness. Press + button to increase brightness. Press - button to decrease brightness. Adjusts the image brightness in relation to the input signal. Press + button to increase contrast. Press - button to decrease co[...]

1-22 English-21 English Adjust the tint of the screen. Press + button the flesh tone color becomes greenish. Press - button the flesh tone color becomes purplish. Adjust the color of the screen. Press + button to increase color depth. Press - button to decrease color depth. R, Y , G, C, B , M, S: Increases or decreases Red, Y ellow , Green, Cyan, B[...]

1-23 English-22 Main-Menu A UDIO Sub-Menu Adjust the balance of L/R volume. Press + button to mov e the stereo sound image to right. Sound of the left side will be small. Press - button to mov e the stereo sound image to left. Sound of the right side will be small. T o accentuate or reduce the high frequency sound. Press + button to increase TREBLE[...]

1-24 English-23 English CONFIGURA TION 1 AUT O SETUP AUT O ADJUST AUT O BRIGHTNESS POWER SA VE LANGUA GE SCREEN SAVER SIDE BORDER COLOR :SEL SET :NEXT :RETURN MENU :EXIT MENU EXIT EXIT LANGUA GE ENGLISH DEUTSCH FRANCAIS ESP AÑOL IT ALIANO SVENSKA PIP SIZE PIP RESET Main-Menu CONFIGURA TION 1 Sub-Menu Press “SET” button to automatically adjust [...]

1-25 English-24 Select “SCREEN SA VER” functions to reduce the risk of the “image persistence”. GAMMA: The display gamma is changed and fix ed when selected “ON”. COOLING F AN: The built in cooling f an is alwa ys on when set “ON”. BRIGHTNESS: The brightness is decreased when selected “ON”. MO TION: Image is slightly e xpanded a[...]

1-26 English-25 English T o compensate for image degradation, which is caused b y using a long cable. RED/GREEN/BLUE DELA Y T o adjust the each phase of RED , GREEN and BLUE signal. LEVEL: 0 - 6 RED/GREEN/BLUE SHARPNESS T o adjust the each performance degradation of RED , GREEN and BLUE signal. LEVEL: 0 - 45 SOG PEAK T o adjust the shape of Sync on[...]

1-27 English-26 Selects the method of input detection when more than two computers are connected. FIRST DETECT: When the current video input signal is not present, then the monitor searches for a video signal from the other video input port. If the video signal is present in the other por t, then the monitor s witches the video source input port to[...]

1-28 English-27 English Selects the image flipping or rotation. NORMAL: Normal display . H MIRROR: Mirror image f or horizontal direction. V MIRROR: Mirror image for v ertical direction. RO T A TE: Rotate the image 180 degrees. Change the display area of the image. O VERSCAN: Set to display area about 95% UNDERSCAN: Set to display area about 100% S[...]

1-29 English-28 Information of status for COOLING F AN, BRIGHTNESS and TEMPERA TURE. COOLING F AN comes to r un when inside temperature is over a guar anteed limit. BRIGHTNESS comes to be decreased when inside temperature is ov er guaranteed limit with cooling fun. In this case warning is displayed on the screen. Adjusts the delay time from “stan[...]

1-30 English-29 English 3. Reducing the environmental temperature is eff ective f or long life use. When Protection board (glass, acryl) is installed over the LCD surf ace, enclosed into the box / w all, or stack the monitor , please utilize the temperature sensors inside monitor . T o reduce the environmental temperature , the monitor should be se[...]

1-31 English-30 Contr olling the LCD monitor via RS-232C Remote Contr ol This LCD monitor can be controlled by connecting a personal computer with a RS-232C terminal. Functions that can be controlled by a personal computer are: • P ower ON or OFF • Switching betw een input signals Connection LCD Monitor + PC NO TE: If your PC (IBM or IBM compat[...]

1-32 English-31 English 3) Control sequence (1) The command from a computer to the LCD monitor will be sent in 400ms. (2) The LCD monitor will send a return command 400ms* after it has received and encoded. If the command isn’t received correctly , the LCD monitor will not send the retur n command. (3) The personal computer checks the command and[...]

1-33 English-32 Features Reduced Footprint: Provides the ideal solution for en vironments requiring superior image quality but with size and weight limitations. The monitor’ s small footprint and low weight allow it to be mov ed or transported easily from one location to anoth er. Color Control Systems: Allows y ou to adjust the colors on your sc[...]

1-34 English-33 English T roubleshooting No picture • The signal cab le should be completely connected to the display card/computer . • The displa y card should be completely seated in its slot. • F ront Power Switch and computer po wer switch should be in the ON position. • Chec k to make sure that a supported mode has been selected on the[...]

1-35 English-34 Specifications f or MDT402S Product Specifications Analog Input Digital Input LCD Module 40" / 101.6cm diagonal Pixel Pitch: 0.648mm Resolution: 1366 x 768 dots Color: Ov er 16 million colors (depending on video card used) Brightness: 450cd/m 2 (T yp.) Contrast Ratio: 1000:1 Response time: 16ms(T r+Tf) Viewing Angle: Up 85°/ D[...]

1-36 English-35 English Specifications f or MDT461S Product Specifications Analog Input Digital Input LCD Module 46" / 116.8cm diagonal Pixel Pitch: 0.7455mm Resolution: 1366 x 768 dots Color: Over 16 million colors (depending on video card used) Brightness: 450cd/m 2 (T yp.) Contrast Ratio: 800:1 Response time: 16ms (T r+Tf) Viewing Angle: Up[...]

1-37 English-36 Pin Assignment 1) Analog RGB input (MiniDsub15p): R G B 2 Pin No Name 1 Video Signal Red 2 Video Signal Green 3 Video Signal Blue 4 GND 5 DDC-GND 6 Red-GND 7 Green-GND 8 Blue-GND 9 +5V (DDC) 10 SYNC-GND 11 GND 12 DDC-SDA 13 H-SYNC 14 V -SYNC 15 DDC-SCL 3) Digital RGB input (D VI-D): R G B 1 4) RS-232 input Pin No Name 1N C 2 RXD 3 T[...]