Mitsubishi XD50U manuale d’uso

IMPORT ANT * DLP™ (Digital Light Processing) and DMD (Digital Micromirror De vice) are registered trademarks of T exas Instru- ments Incorporated (U.S .A.). * DMD is an ultra-precise par t de veloped b y T exas Instruments (U .S.A.) which tak es the place of liquid cr ystal (in the projector). *V GA and XGA are trademarks or registered trademarks[...]

E-1 IMPORT ANT SAFETY INFORMA TION The lightning flash with arrowhead symbol, within an equilater al triangle, is intended to aler t the user to the presence of uninsulated “dangerous v oltage” within the product’ s enclosure that ma y be of sufficient magnitude to constitute a risk of electr ic shock. The e xclamation point within an equilat[...]

E-2 IMPORT ANT SAFETY INFORMA TION Please read all these instructions regarding your projector and retain them f or future ref erence. Follo w all war nings and instructions marked on the projector . 1. Read instructions All the saf ety and operating instructions should be read bef ore the appliance is operated. 2. Retain instructions The saf ety a[...]

E-3 IMPORT ANT SAFETY INFORMA TION COMPLIANCE NOTICE OF FCC This equipment has been tested and f ound to comply with the limits for a Class B digital de vice, pursuant to P ar t 15 of the FCC Rules. These limits are designed to provide reasonab le protection against harmful interference in a residential installation. This equipment generates, uses [...]

E-4 Major Featur es  Lightweight (at about 1.5 kg/3.3 lb) high-intensity mobile pr ojector The synergy of the DLP™ (Digital Light Processing) displa y system and our own optical design serve to improv e the optical utilization efficiency . The three primar y colors (RGB) required in color expression are reproduced with one DMD (Digital Micromi[...]

E-5 T able of Contents IMPORT ANT SAFETY INFORMA TION ................................................................................... E-2 Major Features ................................................................................................................. ...... E-4 Ta b le of Contents ................................................[...]

E-6 Ta b le of Contents Ve r tical Flip ................................................................................................................ E- 45 Ke ystone .................................................................................................................... E-45 Ke ystone Sav e ...........................................[...]

E-7 Checking the Supplied Accessories Remov e the main unit and the accessories from the box and chec k that the follo wing items are included. Remote control (inc ludes one button battery) [1] This controls the projector . Please remove the tr anspor tation insulation sheet at time of purchase. (See P age E-12.) No. 939C100-10 Po wer cable (1.8 m [...]

E-8 Carrying case (for pr ojector and accessories) [1] This is a case designed f or storing the projector and its accessories. Use this carrying case when stor ing or moving the pro- jector . No. 772C019-10 OPEN STATUS SOURCE STANDBY AU TO ME NU QUICK MENU User Manual (CD-R OM edition) [1] No. 871D394-10 User Manual (Simplified Edition) [1] No. 871[...]

E-9 Names of the Main Unit Parts S TATU S SOURCE STANDBY AU TO M ENU Q UIC K M ENU P C CA R D F ront adjuster button [E-25] (There is also one on the right side.) F ocus ring [E-25] Exhaust vents F ront adjusters [E-25] Rear adjuster [E-25] Lamp cover [E-71] V entilation slots Lens cap Remov e bef ore use. Attach the lens cap after use to protect t[...]

E-10 Names of the Main Unit P arts DVI A UDIO VIDEO S-VIDEO STA TUS SOURCE STANDBY AUTO MENU QUICK MENU PC CARD PC-CARD PC-CARD PC A UDIO VIDEO S-VIDEO ST ATUS SOURCE ST ANDBY AUTO MENU QUICK MENU ST ANDBY indicator [E-21, 67] ST A TUS indicator [E-21, 67] AU TO b utton [E-26] Buttons used in menu and quic k menu operations [E-32, 33] ENTER button [...]

E-11 ON OFF FREEZE MUTE LAMP MODE PC PC-CARD VIDEO S-VIDEO QUICK ZOOM CANCEL ASPECT AUTO STANDBY TIMER KSTN VOL MENU ENTER Names of the Remote Contr ol Parts ON OFF FREEZE MUTE PC PC-CARD VIDEO S-VIDEO QUICK ENTER ZOOM CANCEL ASPECT AUTO TIMER KSTN MENU LAMP MODE STANDBY Infrared transmitter [E-12] V OL button [E-30] (V olume adjustment display) Pr[...]

E-12 5m / 16.4 feet 30 ° 50 ° 50 ° 30 ° 30 ° 30 ° 20 ° 20 ° 4m/13.1 feet 7m / 23 feet 4m/13.1 feet 4m/13.1 feet 4m/13.1 feet Pr eparing the Remote Contr ol Button Battery Replacement Using the r emote control for the first time The batter y compar tment is fitted with a transpor tation insulation sheet at the time of shipping. Pull out the [...]

E-13 The Pr ocedur e Up to Pr ojecting to the Scr een P erf or m setup adjustments in the f ollowing order . 1 P osition the projector Deter mine the locations to set up the screen and the projector . See “Placement Guide” on Page E-14. 2 Connect the video equipment and personal computer Connect your equipment to the pr ojector . When making co[...]

E-14 26" 40" 60" 80" 100" 120" 150" 180" 200" 1.20 (3.94) 1.54 – 1.85 (5.05 – 6.07) 2.33 – 2.80 (7.64 – 9.19) 3.12 – 3.75 (10.24 –12.30) 3.91 – 4.70 (12.83 –15.42) 4.70 – 5.64 (15.42 –18.50) 5.89 – 7.07 (19.32 – 23.20) 7.04 – 8.45 (23.10 – 27.72) 7.86 – 9.44 (25.79–30.97) [...]

E-15 Connecting Personal Computers and V ideo Equipment Connecting this unit with a personal computer permits presentation data to be pr ojected as a large screen displa y at conferences, lectures, and on other occasions. Furthermore, connecting this unit to a D VD player or other video equip- ment source in combination with an audio/video amplifie[...]

E-16 Connecting P ersonal Computer s and Video Equipment Personal Computers with a Mini D-Sub 15-Pin Connector • When making connections with the D VI connector of the projector , please make the connection via the supplied D VI/mini D- Sub 15-pin conv ersion cable . The projector has been set to “A uto” at the f actor y; ho wev er , if it do[...]

E-17 Connecting P ersonal Computer s and Video Equipment To Output the External Output Signal of a Notebook Computer When projection will be with a notebook computer connected, knowledge will be required f or the cab le connection and notebook computer star tup procedure as well as the operation that f ollo ws notebook star tup . Please consult the[...]

E-18 PC-CARD S-VIDEO VIDEO Connecting P ersonal Computer s and Video Equipment Connections with Composite Signals V ideo Equipment with VIDEO Connectors • The input setting of the VIDEO connector has been set to “A uto” at the factory; howe v er , if the projector does not project, please change the input setting to “Y our Countr y’ s T e[...]

E-19 PC-CARD Cr Cb Y Pr Pb Y COMPONENT COMPONENT Connecting P ersonal Computer s and Video Equipment Connections with Component Signals When the Video Equipment Has a YCbCr Connector or YPbPr Connector • The projector has been set to “Auto” at the factory; ho we ver , if it does not project, please change the input setting to “Comp o- nent?[...]

E-20 Connecting P ersonal Computer s and Video Equipment Connections with the AUDIO Jack * Mak e the connection to the projector’ s A UDIO jac k using the supplied audio cable. When the audio jack of the equipment that is to be connected is of the RCA phono type, mak e connection via the supplied audio con version cab le. * The built-in speak er [...]

E-21 Power Cable Connections and Switching the Power On/Of f D V IA U D IO VID E O S -V ID E O STA TUS SOURCE STANDBY AUTO MENU QUICK MENU PC CARD PC-CARD ST A TUS ST ANDBY ST A TUS ST ANDBY ST A TUS ST ANDBY There is an order in whic h the power cable is connected and the po wer is switched on/off . Operating 1 Connect the A C IN connector of the [...]

E-22 When [Menu Language Select] is Displayed Upon Switching On the Power The first time the power is s witched on after purchase, [Menu Lan- guage Select] will be displa yed. Follow the procedure described be- low and select the displa y language of the projector . If the image is blurred, turn the f ocus ring counterclockwise or clock- wise to f [...]

E-23 Po wer Cable Connections and Switching the P ower On/Off Finishing 1 Switch off the power of the connected equipment 2 Switch off the power of the pr ojector Main unit operation: Press the ST ANDBY button. Remote control operation: Press the ST ANDBY OFF b utton. The [P ow er Off] display appears . When the le vel gauge reaches maxim um, the p[...]

E-24 Adjustment of the Pr ojection Scr een Switch on the power of the connected equipment and make the adjustments with the video signal being input to the projector . Adjustment of the Pr ojection Screen 2 Adjust the projection image to the screen. Check that the screen is set le v el and vertically . (1) If the image is shifted to the left or rig[...]

E-25 Adjustment of the Projection Screen S T A T U S S O U R C E S T A N D B Y A U T O M E N U Q U IC K M E N U PC CAR D ( 1 ) ( 1 ) ( 2 ) D V I A U D IO V ID E O S - V ID E O STATUS SOURCE STANDBY AUTO MENU QUICK MENU PC CARD P C -C AR D 3 T urn the focus ring and adjust the f ocus of the screen Focus ring Making Adjustments with the Adjusters Rai[...]

E-26 General Operation This section describes the use of direct operation with the main unit or remote contr ol buttons. For information about operation using the men u, see “Menu Operation Method” on Page E-33 and the v arious items on Pa ges E-40 to E-56. Input Selection This operation selects the input signal to be projected. Main unit opera[...]

E-27 General Operation Selection of Aspect Ratio This function selects horizontal and vertical picture proportions of the input signal. Press the ASPECT b utton while viewing the projected image and select the aspect ratio. Pe r sonal Computer Signal Each press of the ASPECT button adv ances the selection one step in the se- quence of Auto → Dire[...]

E-28 Fr eezing a Moving Picture This function is used to stop and vie w a moving picture. Note that the input image continues to adv ance ev en though the picture there is a still picture condition. A press of the FREEZE button c hanges the screen to a still picture . A further press returns the screen to a moving picture. General Operation FREEZE [...]

E-29 General Operation Using the Pr esentation Timer Note: * The timer display will be closed while the menu or the quick menu is displayed, and while a message is displayed; however , the timer will still be operating at such times. Also, the timer will not be displayed unless a signal is being input. * While the presentation timer is being displa[...]

E-30 Keystone Use this to adjust f or trapezoidal (keystone) distortion of the pro- jected image. Adjustment Method (1) Press the KSTN b utton. The k eystone adjustment displa y will appear . The dotted lines indicate the proper condition. Keystone 0 (2) Press the “+” / “–” button while viewing the screen to set the left and right sides p[...]

E-31 ZOOM CANCEL ENTER TIMER KSTN VOL MENU General Operation Enlargement of the Image and V ideo Movement This function digitally enlarges the personal computer image and video image (up to 10 times). (1) Press the ZOOM b utton. The zoom selection displa y will appear . (4) (3) (1) (2) (2) Enlar ge to the desired size. Each press of the (+) b utton[...]

E-32 Brightness 0 General Operation Using the Quick Menu This function permits frequently used adjustments to be performed quickly . Note that the Quick Men u will not be display ed unless the signal of the connected equipment is input. Please select the input that y ou wish to adjust. Main unit operation (1) Press the Q UICK MENU button to displa [...]

E-33 CANCEL MENU FREEZE MUTE LAMP MODE PC PC-CARD VIDEO S-VIDEO QUICK ZOOM ASPECT AUTO TIMER KSTN VOL ENTER ON OFF STANDBY Menu Operation Method • This section describes only the men u operation method. Please see this item should you need inf ormation while perf orming menu operations. • For information about a men u function, adjustment, or s[...]

E-34 Settings Contents Item Name Sub menu Menu Operation Method Menu Screen Names and Functions Menu Name This is the title of the menu. There is a change to the title screen when the menu is se- lected. The selected men u name appears in red. Cursor This permits setting/adjustment of the item located at the cursor position. The selected item is in[...]

E-35 Menu Operation Method Performing Menu Operations • When a signal is not being input, onl y [Setup] and [Info.] can be selected. • The menu displa y will close if, after pressing a button, the next b utton operation is not made within 30 seconds. • The adjustment and the setting v alues are stored even when the power is s witched off or t[...]

E-36 3 Press the SELECT 왔 button to display the cursor Displaying the Cursor This condition al- lows selection of the item name. ENTER CANCEL TIMER KSTN MENU Menu Operation Method 4 Press the SELECT 왖왔 button to align the cursor with the item name Selection of the Item Name ENTER CANCEL TIMER KSTN MENU Items for which the Icon Is Displayed A [...]

E-37 Menu Operation Method 6 Press the MENU button and close the menu display Closing the Menu MENU ENTER CANCEL TIMER KSTN Selecting Another Menu Name with Remote Contr ol Operation When a sub menu is displa yed, press the CANCEL b ut- ton and close the sub menu. Press the CANCEL button again and cancel the cursor display . Press the SELECT 왗왘[...]

E-38 List of Item Names Of fering Input Selection and Adjustments/Settings The item names that can be adjusted/set will differ depending on the input signal. “Tint” can be adjusted only at the time of NTSC composite/S signal input. Menu Operation Method [Example of Menu Displa y Items at the Time of Input Signal Analog RGB Selection] Analog RGB[...]

E-39 Analog RGB Digital RGB YPbPr YCbCr VIDEO S-VIDEO Menu name Setup Info. Auto Source E-46  Item Name Reperence Page Sub Menu Item Name Auto Power Off E-46      Memu Position Lamp Mode E-46 Input Format E-47 PC            [...]

E-40 Pictur e •P erform this operation while pr ojecting the picture for whic h the adjustment/setting will be made. • Select the menu name “Picture”. See “Menu Operation Method” on P age E-33 f or information about perf or ming menu operations . The item name displa y will diff er depending on the input signal. See “List of Item Name[...]

E-41 Fine Pictur e Adjust this when the picture shows a lac k of color fidelity or flick ering. Select the “Fine Picture” item name and adjust with the SELECT 왗왘 b uttons so that the lack of color fidelity or the flic kering disappears. Picture H Position Adjust this when the picture is shifted to the left or right. Select the “H P ositio[...]

E-42 Color • Do the follo wing operation while displaying the image y ou want to adjust or set. • Select the menu name “Color”. See “Menu Operation Method” on P age E-33 f or information about perf or ming menu operations . The item name displa y will diff er depending on the input signal. See “List of Item Names Off ering Input Selec[...]

E-43 Color Space Set this function when a component signal (YCbCr or YPbPr) is pro- jected and the image is extremel y red or extremel y green. Select the item name “Color Space” and use the SELECT 왗왘 b uttons to select a color space setting that provides a normal image. Selection contents at the time of YCbCr input YCbCr601, YCbCr709, YCbC[...]

E-44 V iew •P erform this operation while pr ojecting the picture for whic h the adjustment/setting will be made. • Select the menu name “View”. See “Menu Operation Method” on P age E-33 f or information about perf or ming menu operations . The item name displa y will diff er depending on the input signal. See “List of Item Names Off [...]

E-45 Ve r tical Flip In selecting the method of pr ojecting to the screen, these functions are set when the projector is in a suspended or a rear screen installation. Select the item name “V er tical Flip” or “Horizontal Flip” and select the setting contents with the SELECT 왗왘 b uttons. View “V ertical Flip” Off “Horizontal Flip?[...]

E-46 Setup • Select menu name “Setup”. See “Menu Operation Method” on P age E-33 f or information about perf or ming menu operations . The item name displa y will diff er depending on the input signal. See “List of Item Names Off ering Input Selection and Adjustments/Settings” on P age E-38. The A uto Source function automaticall y de[...]

E-47 Lamp Mode Use this if the picture is projected on a small screen and the picture is too bright or when projecting ima ges in dark rooms. Select the item name “Lamp Mode” and select the setting contents with the SELECT 왗왘 buttons. Low ............ The lamp brightness is set to 80% and the lamp life is extended. (ST A TUS indicator is gr[...]

E-48 Pr esentation Timer The presentation is given while chec king the timer display ed on the screen. The gauge display allo ws the remaining time to be known at a glance. Select the item name “Presentation Timer” and select the setting contents with the SELECT 왗왘 b uttons. Setting contents: Off, 10 minutes, 20 minutes, 30 minutes, 40 minu[...]

E-49 Setup Logo Position This is the setting of the position for the displa y of the logo. Changes cannot be made after the capture. See “Startup Logo Creation” on P age E-57 for inf ormation about using logo capture. Select item name “Logo Capture”, press the ENTER b utton, and the sub menu will open. Select “Logo P osition” and select[...]

E-50 Setup Start Logo Capture This executes ima ge capture. See “Startup Logo Creation” on P age E-57 for inf ormation about using logo capture. Select item name “Logo Capture”, press the ENTER b utton, and the sub menu will open. Select “Star t Logo Capture” and press the ENTER button. There is a change to the capture range selection d[...]

E-51 Setup Initial Setting These are the display settings when the unit has been s witched to PC Card Viewer . See “Using the PC Card View er” on P age E-59 for inf ormation about how to use the view er . Select item name “PC Card View er , ” then press the ENTER button to open the sub menu. Select item name “Initial Settings” and selec[...]

E-52 Setup Interval This is the setting of the slide automatic switching pla y time f or the viewer screen. See “Using the PC Card Viewer” on Page E-59 f or inf or mation about how to use the view er . Select item name “PC Card View er , ” then press the ENTER button to open the sub menu. Select “Pla y Inter val” and set the slide displ[...]

E-53 Setup Language This function sets the language that is display ed on screen in the messages and menu displa ys. Select item name “Option” and press the ENTER button to open the Options sub menu. Select item name “Language” and press the ENTER button to open the Language sub menu. Select the language with the SELECT 왖왔 buttons . On [...]

E-54 Startup Screen This is the selection of whether or not to displa y the logo screen at startup time . See “Star tup Logo Creation” on P age E-57 f or information about us- ing logo capture. Select item name “Option” and press the ENTER button to open the Options sub menu. Select item name “On Screen” and select the setting contents [...]

E-55 Info. • Select menu name “Info. ”. See “Menu Operation Method” on P age E-33 f or inf or mation about performing menu operations . The item name displa y will differ depending on the input signal. See “List of Item Names Off er ing Input Selection and Adjustments/Settings” on P age E-38. Status This displa ys information about th[...]

E-56 Resolution / Frequency This function displa ys the resolution and frequency of the detected in- put signal. Displa ys when analog RGB or digital RGB signal is projected. Lamp Timer This displays the lamp timer . This projector has an LAMP mode function. The lamp life will diff er between Normal mode and Low mode. Lamp Life Use only in Normal m[...]

E-57 Startup Logo Cr eation The startup logo is a function that displays a created logo. After turning on the power , a logo appears in about 15 seconds. The displayed logo disappears in about 30 seconds. A logo can be displayed b y creating it on a per sonal computer , then projecting it with this pr ojector and capturing it. See P ages E-48 to E-[...]

E-58 Startup Logo Creation 7. Start Capture → Page E-50 Selection will not be possible unless a signal is being input. Pressing the ENTER button will start the capture. (1) While capture is oper ating, “Capturing Logo” is displa yed and the adv ance- ment of the gauge is displa yed. (2) When the capture is completed, “Logo Capture Complete?[...]

E-59 Using the PC Car d V iewer Before Using the PC Car d V iewer Slides that have been stored on CompactFlash Car ds can be projected using the projector . Even without a personal computer , a presentation can be made using a stand-alone projector . • Preparation by storing the documentation on CompactFlash Car ds will suffice without the need t[...]

E-60 Using the PC Card Viewer Slide Creation Method To use the PC Card Viewer , a slide must be created bef orehand with a personal computer .  Slide Cr eation Guide 1. Create a slide with the per sonal computer and then con ver t it to im- ag e data. Slide Creation Restrictions: • Please conv er t the slide image to the JPEG, BMP , or PNG for[...]

E-61 Using the PC Card Viewer Names and Functions of the V iewer Functions As an aid in viewer screen operation, this section describes the projector and remote control b uttons, the display screen, names and functions, as well as the use of the tool bar .  Names and Functions of the Remote Contr ol Buttons Used in the Viewer Scr een Opera- tion[...]

E-62 Using the PC Card Viewer  Names and Functions of the Viewer Scr een Parts 1 / 3 FOLDER_3 1 / 1 0000000A_JPG  Using the T ool Bar While the vie wer screen is displayed, a press of the MENU b utton will displa y a tool bar f or the view er operations. Align the (blue) cursor with the desired icon using the SELECT ( 왗왘 ) buttons, then p[...]

E-63 Using the PC Card Viewer Using CompactFlash Cards CompactFlash Cards are used to store the slides created on the personal computer and then pla y them on the projector .  Insertion to the PC Card Slot Hold the CompactFlash Card with the top surface facing upwar d and keeping the card le vel, slowly insert it into the PC card slot. When it h[...]

E-64 Using the PC Card Viewer FREEZE MUTE LAMP MODE PC PC-CARD VIDEO S-VIDEO QC S C O ON OFF STANDBY 1 / 3 FOLDER_1 PC Car d Viewer Operation This description reflects the PC Car d Viewer settings as they were at the time of shipping from the factory . Preparation: Insert the CompactFlash Card into the card slot of the pr ojector . See Page E- 63. [...]

E-65 Using the PC Card Viewer 1 / 2 AAAA09_JPG 2 / 2 AAAA10_JPG 1 / 2 AAAA06_JPG 2 / 2 AAAA10_JPG 2. Use the SELECT 왖왔왗왘 buttons to align the cur sor with the desired thumbnail or f older icon. When a f older icon has been selected, press the ENTER button. The f older will open allowing you to select a thumbnail. Selection Method • Each p[...]

E-66 Using the PC Card Viewer 4. View the Slides The SELECT ( 왗왘 ) buttons permit the slides to be view ed in a forw ard or rev erse sequence. •T o stop the slides dur ing automatic play , press the ENTER button. The slides can also be stopped with the (Stop) icon on the tool bar . See P age E-62 for inf or mation about using the tool bar . R[...]

E-67 When an Indicator is Lit or Flashing STA TUS SOURCE STANDBY AUTO MENU QUICK MENU PC CARD ST ATUS ST ANDBY ST ATUS ST ANDBY ST ATUS ST ANDBY ST ATUS ST ANDBY ST ATUS ST ANDBY ST ANDBY The indicators on the pr ojector’ s control panel light or flash to notify of pr oblems, as described below . An indicator is also used to notify y ou of the cu[...]

E-68 Tr oubleshooting Check the following matters before r equesting servicing. • Is the pow er cord plugged into a power outlet? • Is the lamp cov er properly mounted? • Is the projector’ s temperature high? T o protect the projector , the pow er can- not be tur ned on when the projector’ s temperature is abnormally high. • Has the lam[...]

E-69 Cleaning • Be cer tain to disconnect the power plug from the po wer outlet bef ore cleaning. • Do not spra y or otherwise e xpose the projector , lens, or screen to v olatile substances such as insecticides. Do not leav e r ubber or vinyl products in contact with the projector f or long periods. Doing so could cause them to undergo qualita[...]

E-70 Replacing the Lamp Cartridge • The lamp that is used as a light sour ce in the projector has a limited service life. The rated service life of the lamp is about 1500 hour s (when used in normal mode only). This could be shortened depending on conditions of use and other factors. Note that lamp life will be e xtended when the projector is oft[...]

E-71 Replacing the Lamp Cartridg e Preparations: Tu r ning the projector upside-down on top of a soft cloth, etc., so that it does not get scr atched makes it easier to replace the lamp car tridge. T urn the projector r ight-side up after replacing the lamp car tr idge. 1 Unplug the power cor d. 2 T urn the projector upside-do wn. 3 Remove the lamp[...]

E-72 Replacing the Lamp Cartridg e 5 Mount the new lamp cartridge . (1) Place the lamp car tr idge with its sock et f acing to the r ight and push it in slowly . (Line it up with the screw holes in the projector .) 6 Mount the lamp cover . (1) Set the tip of the lamp cov er in place, then close the lamp cov er . 7 Reset the Lamp Timer . Connect the[...]

E-73 Specifications Model XD50U Optical Method of projection : DLP™ (single chip DMD) DMD 0.7 inches 1024  768 dots Lamp 150 W high pressure mercur y lamp Projection lens : See below Image size See below Light Output 1500 ANSI lumens Contrast Ratio 1500:1 (Full on/off) Electrical Inputs Video (NTSC3.58/NTSC4.43/P AL/P AL-N/P AL-M/P AL60/SECAM)[...]

E-74 T able of Supported Fr equency The projector automatically identifies the signal input from the computer and selects the optimum resolution as sho wn on the ta ble below . Manual adjustments ma y be required f or some input signals. See “Picture Adj. / Fine Picture / H P osition / V P osition” on page E- 40, 41.  : Suppor ted frequency [...]

E-75 ST ATUS SOURCE ST ANDBY AUTO MENU QUICK MENU PC CARD Cabinet Dimensions Unit: mm (inch) 190 (7.5) 53 (2.1) 239 (9.4) 12 (0.5)[...]

M IT SUBIS HI ELECTRIC CORPORAT I ON 1 Zusho Baba, Nagaokakyo-City , K yoto J apan[...]