Multiquip DFG Series manuale d’uso

OPERATION AND PARTS MANUAL Electric, Gasoline and Propane Converted Crack Saw Model CS8 Series Revision #4 ( 05/28/09 ) Electric and Gasoline Surface Grinders Model DFG Series THIS MANUAL MUST ACCOMPANY THE EQUIPM ENT AT ALL TIMES T o find the latest revision of this publication, visit our website at: www .multiquip.com[...]

[...]

TABLE OF CONTENTS DFG-SERIES SURFACE GRINDERS OPERATION AN D PARTS MANUAL REV. #4 (05/ 28/09) PAGE 3 MULTIQUIP DFG SERIES SURFACE GRINDERS Table Of Contents .............................................................................................................. ................... 3-4 Parts Orderi ng Proc edures ..............................[...]

TABLE OF CONTENTS DFG-SERIES SURFACE GRINDERS OPERATION AN D PARTS MANUAL REV. #4 (05/ 28/09) PAGE 4 Maintenance/ Service ............................................................................................................ ................ 40 Preventative Maint enance Che ck List .............................................................[...]

DFG-SERIES SURFACE GRINDERS OPERATION AN D PARTS MANUAL REV. #4 (05/ 28/09) PAGE 5 NOTE PAGE[...]

PARTS ORDERING PROCEDURES DFG-SERIES SURFACE GRINDERS OPERATION AN D PARTS MANUAL REV. #4 (05/ 28/09) PAGE 6 www .m ultiquip .com Or dering par ts has never been easier! Choose from thr ee easy options: WE A CCEPT ALL MAJOR CREDIT CARD S ! When ordering parts, please supply: ❒ Dealer Account Number ❒ Dealer Name and Addre ss ❒ S hipping Addre[...]

NOTICE TO OPERATORS DFG-SERIES SURFACE GRINDERS OPERATION AN D PARTS MANUAL REV. #4 (05/ 28/09) PAGE 7 IF YOU CAN NOT READ OR DO NOT FULLY UNDERSTAND THE CONTENTS OF THIS MANUAL, PLEASE CONTACT THE F ACTORY FOR PRO PER ASSISTANCE BEFORE ATTEMPTING TO O PERATE THIS PRODUCT. SI TU NO PUEDES LE'ER O NO COM PRENDES EL CONTENIDO DE ESTE MANUAL FAVO[...]

NOTICE TO OPERATORS DFG-SERIES SURFACE GRINDERS OPERATION AN D PARTS MANUAL REV. #4 (05/ 28/09) PAGE 8 The concept of powered SURFACE GRINDER has been successfully utilized for many years as a practic al solution to many types of surface preparation requi rements. The basic concept is proven and well accepted within the associated marketpla ces. Us[...]

OPERATOR INSTRUCTIONAL DATA SHEET DFG-SERIES SURFACE GRINDERS OPERATION AN D PARTS MANUAL REV. #4 (05/ 28/09) PAGE 9 The following undersigne d oper a tors of the SURFACE GRI NDER described a nd/or pert a ining to this Oper a tor M a nu a l h a ve received form a l s a fety a nd oper a tion a l inform a tion/instruction from the undersign ed owner([...]

SAFETY PRECAUTIONS DFG-SERIES SURFACE GRINDERS OPERATION AND PARTS MANUAL REV #4 (05/28/09) PAGE 10 THE FOLLOWING SAFETY PRECAUTIONS PROVIDE SOME COMMO N SENSE GUIDES TO PROMOTE SAFETY AND EFFI CIENCY WITH THE SURFACE GRINDE R. NO WARRANTY, GUARANTEE OR REPRESENTATION IS MADE BY THE MANUFACTURE R AS TO THE ABSOLUTE CORRECTNESS OR SUFFICIENCY OF ANY[...]

SAFETY PRECAUTIONS DFG-SERIES SURFACE GRINDERS OPERATION AND PARTS MANUAL REV #4 (05/28/09) PAGE 11 GRINDER. Guide a g a inst the possibility of b a ck rel a ted injuries. Alw a ys lift the SURFACE GRINDER wit h leg muscles a nd not with the b a ck. 6) Prolonged use of the SURFACE GRI NDER (or other, simil a r m a chines) exposes th e oper a tor to[...]

SAFETY PRECAUTIONS DFG-SERIES SURFACE GRINDERS OPERATION AND PARTS MANUAL REV #4 (05/28/09) PAGE 12 12. When ope r a ting the DFG20E or DFG30E electric a lly powered SURFAC E GRINDERs on a surf a ce cont a ining w a te r or other electric a lly conducting liquid, speci a l p rec a utions must be t a ken to minimize the possibility of oper a tor ele[...]

SAFETY PRECAUTIONS DFG-SERIES SURFACE GRINDERS OPERATION AND PARTS MANUAL REV #4 (05/28/09) PAGE 13 7) St a rt a nd oper a te the SURFACE GRINDER only in a well ventil a ted a re a . C a rbon Monoxide fumes given off by a n engine a re poisonous. Bre a thing these fumes c a n re sult in property d a m a ge a nd/or person a l injury. Oper a te the S[...]

SAFETY PRECAUTIONS DFG-SERIES SURFACE GRINDERS OPERATION AND PARTS MANUAL REV #4 (05/28/09) PAGE 14 of the belt gu a rd, properl y dispose a nd repl a ce with a genuine, f a ctory a pproved, repl a cement p a rt only. 7) M a int a in a ll s a fety a nd oper a tion dec a ls in proper condition. If a ny dec a l become s d a m a ged a nd/or unre a d a[...]

DFG-SERIES SURFACE GRINDERS OPERATION AND PARTS MANUAL REV #4 (05/28/09) PAGE 15 ASSEMBLY INSTRUCTIONS/OPERATIONS Assembly The DFG Series SU RFACE GRINDER i s shipped from the f a ctory secured on a speci a lly des igned wooden p a llet a nd protected from extern a l d a m a ge by a corrug a ted c a rton or wood c r a te. If shipped with a corrug a[...]

DFG-SERIES SURFACE GRINDERS OPERATION AND PARTS MANUAL REV #4 (05/28/09) PAGE 16 ASSEMBLY INSTRUCTIONS/OPERATIONS INSTALLING THE SG24-1000 SAFETY AND DUST SHIELD ASSEMBLY KIT. Application: All Models. Tools Required: 1 e a ch, 5/32 inch Allen wrench. 1 e a ch, 7/16 inch wrench. 2 e a ch, 1/2 inch wrenches. 1 e a ch, fl a t bl a de screwdriver. 1) I[...]

DFG-SERIES SURFACE GRINDERS OPERATION AND PARTS MANUAL REV #4 (05/28/09) PAGE 17 ASSEMBLY INSTRUCTIONS/OPERATIONS FIGURE 3 6) Assemble the two e a ch, hose cl a mps P/N 14821-012 over the PN 2900 18-093 v a cuum hose. Inst a ll the v a cuum hose over the v a cuum hose a tt a ch fittings. Determine th a t the configur a tion minimizes potenti a l ki[...]

DFG-SERIES SURFACE GRINDERS OPERATION AND PARTS MANUAL REV #4 (05/28/09) PAGE 18 ASSEMBLY INSTRUCTIONS/OPERATIONS 3) Using the funnel, fill the fuel t a nk with fresh, cle a n fuel a ccording to the spe cific a tions outlined in the m a teri a l supplied by the engine m a nuf a cturer. Do not overfill the t a nk or spill a ny fuel. If the fuel t a [...]

DFG-SERIES SURFACE GRINDERS OPERATION AND PARTS MANUAL REV #4 (05/28/09) PAGE 19 ASSEMBLY INSTRUCTIONS/OPERATIONS a ) The C06 a nd C10 co a rse gr a de stones a re the most popul a r utilized stones a nd result in m a ximum m a teri a l remov a l r a tes. They a re utilized for gener a l grinding a nd the remov a l of trowel m a rks, high spots a n[...]

DFG-SERIES SURFACE GRINDERS OPERATION AND PARTS MANUAL REV #4 (05/28/09) PAGE 20 ASSEMBLY INSTRUCTIONS/OPERATIONS utilized for the fin a l finishing sequen ce. Gener a lly spe a king, the more a ggre ssive the fl a il configur a tions, the more co a rse the resulting finish a nd texture. M a ny fl a il configur a tions a re a v a il a ble to meet a[...]

DFG-SERIES SURFACE GRINDERS OPERATION AND PARTS MANUAL REV #4 (05/28/09) PAGE 21 ASSEMBLY INSTRUCTIONS/OPERATIONS COST 1 PRODUCTIVITY 5 SERVICE LIFE 2 The be a m fl a il should be repl a ced wh en the outside di a meter is worn to a pproxim a tely 1-5/16 inch or the inside di a meter elong a tes to a pproxim a t ely 3/4 inch. Pentagonal Flail The p[...]

DFG-SERIES SURFACE GRINDERS OPERATION AND PARTS MANUAL REV #4 (05/28/09) PAGE 22 ASSEMBLY INSTRUCTIONS/OPERATIONS sp a cer w a sh er on the sc a rifier block. By mixing a nd m a tching fl a ils a nd s p a cer w a shers of specifi c thicknesses, the required num ber of components c a n be a ssembled on a block in a minimum a mount of time. DANGER US[...]

DFG-SERIES SURFACE GRINDERS OPERATION AND PARTS MANUAL REV #4 (05/28/09) PAGE 23 ASSEMBLY INSTRUCTIONS/OPERATIONS Wire brushes a re a v a il a ble in a number of fl a t wire sizes a nd resulting configur a tions. With continuous use, the fl a t wire will t a ke a "set" th a t c a n limit effectiven ess a nd over a ll productivity. FIGURE [...]

DFG-SERIES SURFACE GRINDERS OPERATION AND PARTS MANUAL REV #4 (05/28/09) PAGE 24 ASSEMBLY INSTRUCTIONS/OPERATIONS of up to sever a l hund red squ a re feet per hour c a n be re a lized. Howe ver, m a ny thin film ( ie: 5 mill thickness a nd thinner) ureth a ne co a tings present a much more diff icult remov a l problem. Since remo v a l r a tes a r[...]

DFG-SERIES SURFACE GRINDERS OPERATION AND PARTS MANUAL REV #4 (05/28/09) PAGE 25 ASSEMBLY INSTRUCTIONS/OPERATIONS CAUTION Follow all safety precautions for the safety solvent. 2) Remove the c a p screw from the unit. Cle a n the newly expose d a re a s of the insert a nd S CRAPE- R-TACH unit with the s a fety solvent. Cle a n a nd inspect the thre [...]

DFG-SERIES SURFACE GRINDERS OPERATION AND PARTS MANUAL REV #4 (05/28/09) PAGE 26 ASSEMBLY INSTRUCTIONS/OPERATIONS To m a ximize the servi ce life of the di a mond segments, it is reco mmended th a t the bl a des be rot a ted between gimb a l he a ds a minimum of once for every 8 hours of oper a tion. FIGURE 22 Diamond Segment Block The di a mond in[...]

DFG-SERIES SURFACE GRINDERS OPERATION AND PARTS MANUAL REV #4 (05/28/09) PAGE 27 ASSEMBLY INSTRUCTIONS/OPERATIONS a ppropri a te weight to the h a ndle for a dded st a bility. Other me a ns c a n a lso be utilized to support the fr a me a nd provide proper m a chi ne st a bility. Appropri a te wheel chocks a re a lso recommended. FIGURE 25. DANGER [...]

DFG-SERIES SURFACE GRINDERS OPERATION AND PARTS MANUAL REV #4 (05/28/09) PAGE 28 ASSEMBLY INSTRUCTIONS/OPERATIONS 5) Using a h a mmer, strike the wider si de of the mounting wedge with cont rolled, direct blows to firmly se a t the multi- a ccessory a tt a chment into the a luminum disc. Usu a lly one or two direct blows will be sufficient to prope[...]

DFG-SERIES SURFACE GRINDERS OPERATION AND PARTS MANUAL REV #4 (05/28/09) PAGE 29 ASSEMBLY INSTRUCTIONS/OPERATIONS FIGURE 28 CAUTION Do not utilize excessive force when removing a multi-accessory attachment with the pry bar. Excessive force can result in damage to the aluminum disc. Proper removal techniques by both methods will result in minimal da[...]

DFG-SERIES SURFACE GRINDERS OPERATION AND PARTS MANUAL REV #4 (05/28/09) PAGE 30 ASSEMBLY INSTRUCTIONS/OPERATIONS Consult a pplic a ble OSHA, AGA, CGA, etc. regul a tions for the prope r tr a nsport a tion fl a mm a ble g a ses. ADJUSTING THE OPERATOR HANDL E HEIGHT. Application: All Models. The DFG Series SURFACE GRINDER incorpor a tes a h a ndle [...]

DFG-SERIES SURFACE GRINDERS OPERATION AND PARTS MANUAL REV #4 (05/28/09) PAGE 31 ASSEMBLY INSTRUCTIONS/OPERATIONS CAUTION Operating the SURFACE GRINDER from a pow er source of improper vol tage and amperage will result in un-repairable damage to the electric motor and related controls. FIGURE 31 4) Providing proper volt a ge a nd a mper a ge levels[...]

DFG-SERIES SURFACE GRINDERS OPERATION AND PARTS MANUAL REV #4 (05/28/09) PAGE 32 ASSEMBLY INSTRUCTIONS/OPERATIONS utilizing the SURFACE GRINDER. There i s no ch a rge for this service. A qu a lified electrici a n c a n a lso be consulted. If a 115 VAC p ower outlet is selected, it is recommended th a t a properly tested, extern a lly mounted, groun[...]

DFG-SERIES SURFACE GRINDERS OPERATION AND PARTS MANUAL REV #4 (05/28/09) PAGE 33 ASSEMBLY INSTRUCTIONS/OPERATIONS DANGER AS SOON AS THE CENTRI FUGAL CLUT CH ASSEMBLY BECOMES ENGAGED, THE OPERATOR MUST BE IN A POSITION TO ASSUME DIRECT AND FULL CONTROL OF THE SURFACE GRINDER. FAI LURE TO ASSUME DIRECT AND FULL CONTROL CAN RESU LT IN PROPERTY DAMAGE [...]

DFG-SERIES SURFACE GRINDERS OPERATION AND PARTS MANUAL REV #4 (05/28/09) PAGE 34 ASSEMBLY INSTRUCTIONS/OPERATIONS RESULT IN PROPERTY DAMAGE AND/OR PERSONAL INJURY. 2) Productivity r a tes with the v a ri ous multi- a ccessory a tt a chments c a n be in cre a sed with the a ddition of extern a l weight being a pplied to the a re a over the counter-r[...]

DFG-SERIES SURFACE GRINDERS OPERATION AND PARTS MANUAL REV #4 (05/28/09) PAGE 35 ASSEMBLY INSTRUCTIONS/OPERATIONS 5) The grinding process on m a ny wo rk surf a ce m a teri a ls c a n produce sp a rks, dust a nd other foreign p a rticle c ont a min a tion. DANGER SPARKS PRODUCED BY THE ACTIONS OF MULTI-ACCESSORY OPTIONS AGAINST THE WORK SURFACE (FO[...]

DFG-SERIES SURFACE GRINDERS OPERATION AND PARTS MANUAL REV #4 (05/28/09) PAGE 36 ASSEMBLY INSTRUCTIONS/OPERATIONS DANGER PROPERLY DISPOSE OF ALL ACCUMULATE D MATERIALS PER OSHA AN D ENVIRONMENTAL PROTECTION AGEN CY CODES AND REGULATIONS. MANY ACCUMULA TED MATERIALS CAN BE CLASSIFI ED AS HAZARDOUS AND R EQUIRE PROPER DISPOSAL PROCEDUR ES. CONTACT TH[...]

DFG-SERIES SURFACE GRINDERS OPERATION AND PARTS MANUAL REV #4 (05/28/09) PAGE 37 ASSEMBLY INSTRUCTIONS/OPERATIONS intention a lly sloped for dr a in a ge consider a tions. Very few, if a ny, floors a re specific a lly designed to be unfl a t. Unfortun a tely, m a ny turn out th a t w a y. Fl a tness a nd levelness a re both desir a ble, but h a ve [...]

DFG-SERIES SURFACE GRINDERS OPERATION AND PARTS MANUAL REV #4 (05/28/09) PAGE 38 ASSEMBLY INSTRUCTIONS/OPERATIONS cl a ssific a tion is from the Americ a n Co ncrete Institute. Although the F number system is only a few ye a rs old, it offers these a dv a nt a ges: a ) The system controls both fl a tness a nd levelness. b) There is a st a nd a rd t[...]

DFG-SERIES SURFACE GRINDERS OPERATION AND PARTS MANUAL REV #4 (05/28/09) PAGE 39 ASSEMBLY INSTRUCTIONS/OPERATIONS necess a ry to survey the floor during the grinding process to ensure th a t fl a tness a nd levelness specific a tions a re m a int a ined. Cleaning concrete floors to improve the wear resistance with the DFG Series SURFACE GRINDER Cle[...]

DFG-SERIES SURFACE GRINDERS OPERATION AND PARTS MANUAL REV #4 (05/28/09) PAGE 40 MAINTENANCE/SERVICE Maintenance/Service PREVENTATIVE MAINTE NANCE CHECK LIST. Application: All Models. The norm a l oper a tion of the SURFACE GRINDER produces extreme dirt a nd dust, a long with level s of r a ndom vibr a tion. Before oper a ting the SURFACE GRINDER, [...]

DFG-SERIES SURFACE GRINDERS OPERATION AND PARTS MANUAL REV #4 (05/28/09) PAGE 41 MAINTENANCE/SERVICE 3) Remove the rubb er l a tches a nd sli de the belt gu a rd a w a y from the engine/electric mot or until it cle a rs the c a tch mech a nism. Remove the belt gu a rd from the m a in fr a me. If the SURFACE GRINDER is equipped with a Prop a ne conv[...]

DFG-SERIES SURFACE GRINDERS OPERATION AND PARTS MANUAL REV #4 (05/28/09) PAGE 42 MAINTENANCE/SERVICE 1) Position the SURFACE G RINDER on a suit a ble work surf a ce with the V-belts a ppro xim a tely a t w a ist level. 2) Remove the rubb er l a tches a nd sli de the belt gu a rd a w a y from the engine/electric mot or until it cle a rs the c a tch [...]

DFG-SERIES SURFACE GRINDERS OPERATION AND PARTS MANUAL REV #4 (05/28/09) PAGE 43 MAINTENANCE/SERVICE FIGURE 44 DANGER WEAR SAFETY EYEWEAR AND OTHER APPROPRIATE APPAREL WHEN DISASSEMBLING THE CE NTRIFUGAL CLUTCH ASSEMBLY. CAUTION ALL ONLOOKERS REGARDING THE POTENTIAL FO R FLYING DEBRIS. FAILURE TO EXERCISE PROPER SAFETY PRECAUTIONS CAN RESULT IN PRO[...]

DFG-SERIES SURFACE GRINDERS OPERATION AND PARTS MANUAL REV #4 (05/28/09) PAGE 44 MAINTENANCE/SERVICE REPLACING THE LORD® TYPE ELASTOMERIC MOUNTS ON THE MULTI -ACCESSORY DISCS. Application: All Models. Lord® type el a stome ric rubber mounts a re utilized to a llow e a ch multi- a ccesso ry disc to m a int a in full cont a ct with the work sur f a[...]

DFG-SERIES SURFACE GRINDERS OPERATION AND PARTS MANUAL REV #4 (05/28/09) PAGE 45 MAINTENANCE/SERVICE FIGURE 49 8) Apply the inst a ll a tion lub ric a nt to the exterior surf a ce of the el a stomeric mount to minimize d a m a ge when pressing int o the mounting disc. If the f a ctory supplied lubric a nt is not a v a il a ble, a n a ccept a ble a [...]

DFG-SERIES SURFACE GRINDERS OPERATION AND PARTS MANUAL REV #4 (05/28/09) PAGE 46 MAINTENANCE/SERVICE Excessive a mounts of gre a se in the be a ring r a ce c a vity c a n a ctu a lly incre a se friction a nd resulting he a t incre a ses th a t c a n a lso dr a m a tic a lly shorten be a ring servi ce life. Figure 51. Lubric a tion Points 3) The tr [...]

DFG-SERIES SURFACE GRINDERS OPERATION AND PARTS MANUAL REV #4 (05/28/09) PAGE 47 TROUBLESHOOTING Troubleshooting ELECTRIC MOTOR. Application: DFG/E Serie s SURFACE GRINDER. MOTOR FAILS TO START ON/OFF switch in the OFF position. Turn the switch to the ON position. Improper volt a ge sel ection. Determine the a v a il a ble volt a ge v a lue from th[...]

DFG-SERIES SURFACE GRINDERS OPERATION AND PARTS MANUAL REV #4 (05/28/09) PAGE 48 TROUBLESHOOTING OPERATIONAL PROBLEMS. Application: All Models. UNEVEN MULTI-ACCESSORY ATTACHMENT WEAR Incorrect inst a ll a tion of the a tt a chment in the a luminum disc. See INSTALLING A MUL TI- ACCESSORY ATTACHMENT ON THE COUNTERROTATI NG DISCS. Worn or d a m a ged[...]

DFG-SERIES SURFACE GRINDERS OPERATION AND PARTS MANUAL REV #4 (05/28/09) PAGE 49 STORAGE Storage Application: All Models. Proper procedure for lo ng term stor a ge of the SURFACE GRINDER will protect it a g a ins t the effects of corrosion a nd d a m a ge. If the SURFACE GRINDER is not to be oper a ted for a perio d of 30 d a ys or more, proceed to[...]

DFG-SERIES SURFACE GRINDERS OPERATION AND PARTS MANUAL REV #4 (05/28/09) PAGE 50 SPECIFICATIONS Specifications STRUCTURE.................................................................... Unit ized, Welded Steel Pl a te DRIVE REDUCT ION SYSTEM ........................................ B50 Se ries Belt/Pulley/Spur Ge a r tr a nsmission. MAXIMUM GRIN[...]

DFG-SERIES SURFACE GRINDERS OPERATION AND PARTS MANUAL REV #4 (05/28/09) PAGE 51 NOTE PAGE[...]

EXPLANATION OF CODE IN REMARKS COLUMN DFG-SERIES SURFACE GRINDERS OPERATION AN D PARTS MANUAL REV #4 (05/ 28/09) PAGE 52 The f ollowing s ection e xpl a in s the different s ym b ol s a nd rem a rk s us ed in the P a rt s s ection of thi s m a n ua l. U s e the help n u m b er s fo u nd on the ba ck p a ge of the m a n ua l if there a re a ny qu e [...]

DFG-SERIES SURFACE GRINDERS OPERATION AN D PARTS MANUAL REV #4 (05/ 28/09) PAGE 53 SUGGESTED SPARE PARTS DFG SURFACE GRINDER 1 TO 3 UNITS Gasoline Engine Model Qty. P/N Description 1 ............. 29018-037 ..............CABLE, THROTTLE 1 ............. 29018-038 ..............KNOB, THROTTLE CONTROL 1 ............. 29018-022 ..............CLUTCH, PU[...]

OPERATOR HANDLE ASSY. ( ELECTRIC ) DFG-SERIES SURFACE GRINDERS OPERATION AN D PARTS MANUAL REV #4 (05/ 28/09) PAGE 54 OPERATOR HANDLE ASSY. (ELECTRIC)[...]

OPERATOR HANDLE ASSY. ( ELECTRIC ) DFG-SERIES SURFACE GRINDERS OPERATION AN D PARTS MANUAL REV #4 (05/ 28/09) PAGE 55 OPERATOR HANDLE ASSY. (ELECTRIC) NO. PART NO. PART NAME QTY. REMARKS 1 29018-033 HANDLE, OPERATOR UNIVERSAL 1 2 29018-040 HOUSING, SWITCH ...................................................... 1 .......... 2 HP MOTOR ONLY 3 29018-04[...]

OPERATOR HANDLE ASSY. ( GASOLINE ) DFG-SERIES SURFACE GRINDERS OPERATION AN D PARTS MANUAL REV #4 (05/ 28/09) PAGE 56 OPERATOR HANDLE ASSY . (GASOLINE)[...]

OPERATOR HANDLE ASSY. ( GASOLINE ) DFG-SERIES SURFACE GRINDERS OPERATION AN D PARTS MANUAL REV #4 (05/ 28/09) PAGE 57 OPERATOR HANDLE ASSY. (GASOLINE) NO. PART NO. PART NAME QTY. REMARKS 1 29018-033 HANDLE, OPERATOR UNIVERSAL 1 2 29018-034 LEVER, THROTTLE CO NTROL, W/CABLE & KNOB 1 3 29018-035 SCREW, SOCKET 10-32 UNF X 5/8 ” , PLATED 2 4 0650[...]

ELECTRIC MOTOR ASSY. DFG-SERIES SURFACE GRINDERS OPERATION AN D PARTS MANUAL REV #4 (05/ 28/09) PAGE 58 ELECTRIC MOTOR ASSY .[...]

ELECTRIC MOTOR ASSY. DFG-SERIES SURFACE GRINDERS OPERATION AN D PARTS MANUAL REV #4 (05/ 28/09) PAGE 59 ELECTRIC MOTOR ASSY. NO. PART NO. PART NAME QTY. REMARKS 1 29018-027 MOUNT, ELECTRIC MOTOR 1 2 29018-028 MOTOR, ELECTRIC, 2 HP , 115/230 VAC, 60 HZ .............1...........P145K34FB18A 2 SF12136000 MOTOR, ELECTRIC , 3 HP, 230 VAC, 50/60 HZ 1 3 S[...]

GASOLINE ENGINE ASSY. DFG-SERIES SURFACE GRINDERS OPERATION AN D PARTS MANUAL REV #4 (05/ 28/09) PAGE 60 GASOLINE ENGINE ASSY.[...]

GASOLINE ENGINE ASSY. DFG-SERIES SURFACE GRINDERS OPERATION AN D PARTS MANUAL REV #4 (05/ 28/09) PAGE 61 GASOLINE ENGINE ASSY. NO. PART NO. PART NAME QTY. REMARKS 1 GX340 ENGINE, HONDA 11 H.P. 1 2 29018-021 MOUNT, GASOLINE ENGINE 1 3 29018-022 CLUTCH, PULLEY ASSY. 1 4 29018-023 ADAPTER, M20 X 7/8-14 UNF 1 5 29018-024 CAP, OIL DRAIN 1 6 29018-025 KE[...]

WHEEL ASSY. DFG-SERIES SURFACE GRINDERS OPERATION AN D PARTS MANUAL REV #4 (05/ 28/09) PAGE 62 WHEEL ASSY .[...]

WHEEL ASSY. DFG-SERIES SURFACE GRINDERS OPERATION AN D PARTS MANUAL REV #4 (05/ 28/09) PAGE 63 WHEEL ASSY. NO. PART NO. PART NAME QTY. REMARKS 1 29018-046 ARM, SWING 2 2 29018-047 WHEEL 2 3 29018-048 AXLE, PLATED 1 4 07594-024 PIN, ROLL 3/16 ” 1-1/2 ” 4 5 07030-012 WASHER, FLAT ¾ ” PLATED 2 6 07033-010 NUT, HEXAGON 5/8-11 UNC, PLATED 2 7 070[...]

TRANSMISSION ASSY. DFG-SERIES SURFACE GRINDERS OPERATION AN D PARTS MANUAL REV #4 (05/ 28/09) PAGE 64 TRANSMISSION ASSY.[...]

TRANSMISSION ASSY. DFG-SERIES SURFACE GRINDERS OPERATION AN D PARTS MANUAL REV #4 (05/ 28/09) PAGE 65 TRANSMISSION ASSY. NO. PART NO. PART NAME QTY. REMARKS 1 29018-001 FRAME, MAIN 1 2 29018-002 COVER, TRANSMISSION 1 3 29018-003 BEARING, FLANGE 6 4 07029-006 WASHER, LOCK 3/8 ” , PLATED 24 5 07033-006 NUT, HEXAGON 3/8-16 UNC, PLATED 24 6 06500-006[...]

HEAD ASSY. DFG-SERIES SURFACE GRINDERS OPERATION AN D PARTS MANUAL REV #4 (05/ 28/09) PAGE 66 HEAD ASSY.[...]

HEAD ASSY. DFG-SERIES SURFACE GRINDERS OPERATION AN D PARTS MANUAL REV #4 (05/ 28/09) PAGE 67 HEAD ASSY. NO. PART NO. PART NAME QTY. REMARKS 1 29018-051 DISC, MULTI- ACCESSORY LH 1 2 29018-052 DISC, MULTI- ACCESSORY RH 1 3 29018-053 BAR, MOUNTING 2 4# 29018-054 DISC, MOUNTING 2 5# 29018-055 RUBBER BUSHING 12 6 06502-016 SCREW, CAP 7/16-14 UNC X 2 ?[...]

SAFETY AND DUST SHIELD ASSY. DFG-SERIES SURFACE GRINDERS OPERATION AN D PARTS MANUAL REV #4 (05/ 28/09) PAGE 68 SAFETY AND DUST SHIELD ASSY.[...]

SAFETY AND DUST SHIELD ASSY. DFG-SERIES SURFACE GRINDERS OPERATION AN D PARTS MANUAL REV #4 (05/ 28/09) PAGE 69 SAFETY AND DUST SHIELD ASSY. NO. PART NO. PART NAME QTY. REMARKS 1# 29018-088 SKIRT, GRINDER 1 2# 29018-089 SKIRT ASSEMBLY 1 3# 29018-090 WASHER, FENDER 1/4 “ , PLATED 11 4# 29018-091 SCREW, CS 1/4 “ X 1 ” UNC 9 5# 06500-007 SCREW, [...]

SCARIFIER ASSY . DFG-SERIES SURFACE GRINDERS OPERATION AN D PARTS MANUAL REV #4 (05/ 28/09) PAGE 70 SCARIFIER ASSY.[...]

SCARIFIER ASSY . DFG-SERIES SURFACE GRINDERS OPERATION AN D PARTS MANUAL REV #4 (05/ 28/09) PAGE 71 SCARIFIER ASSY. NO. PART NO. PART NAME QTY. REMARKS 1 SFSG241900012 HOUSING 1 2 29018-083 BUSHING 2 3 SF87052000 BOLT CARRIAGE 3/8 ” -16 UNC X 2-1/2 UNC, PLATED 2 4 29019-013 WASHER, FLAT 5/8 ” , HEAT TR EATED ...................................1[...]

SCRAPE-R-TACH ASSY. DFG-SERIES SURFACE GRINDERS OPERATION AN D PARTS MANUAL REV #4 (05/ 28/09) PAGE 72 SCRAPE-R-TACH ASSY.[...]

SCRAPE-R-TACH ASSY. DFG-SERIES SURFACE GRINDERS OPERATION AN D PARTS MANUAL REV #4 (05/ 28/09) PAGE 73 SCRAPE-R-TACH ASSY. NO. PART NO. PART NAME QTY. REMARKS 1 29018-082 HOUSING 1 2 29018-084 HOLDER, INSERT 1 3 29018-085 MOUNT, RUBBER 1 4 29018-086 SPACER 2 5 29019-019 INSERT, TUNGSTEN CARBIDE 2 6 29018-087 SCREW, C/S 1/4 ” UNC X 1-1/4 ” 2 7 0[...]

DFG-SERIES SURFACE GRINDERS OPERATION AN D PARTS MANUAL REV #4 (05/ 28/09) PAGE 74 GRINDING BLOCK ASSY. GRINDING BLOCK ASSY.[...]

DFG-SERIES SURFACE GRINDERS OPERATION AN D PARTS MANUAL REV #4 (05/ 28/09) PAGE 75 GRINDING BLOCK ASSY. GRINDING BLOCK ASSY. NO. PART NO. PART NAME QTY. REMARKS 1 SFG242101010 BLOCK 1 2 SFG242101030 O-RING 3 3 SF83040901 PIN, RETAINING, STAINLESS STEEL 3 4 29019-017 WEDGE, PLASTIC 1 5 SFSG242100020 PIN, DI AMOND PURPLE 40-50 GRIT ........... 3 ....[...]

DECALS. DFG SERIES SURFACE GRINDERS OPERATION AND PARTS MANUAL REV #3 (07/13/06) PAGE 76 DECALS. KEEP GU ARDS IN PLA CE SP8-5050 W ARNING W ARNING BEFORE HOISTING THIS MACHINE CONSUL T THE APPLICABLE OPERA TOR MANUAL. IMPR OPER HOISTING PROCEDURES CAN RESUL T IN PROPER TY DAMAGE AND/OR PERSONAL INJURY . KEEP CLEAR OF R O T A TING PA RT S W ARNING S[...]

DECALS. DFG SERIES SURFACE GRINDERS OPERATION AND PARTS MANUAL REV #3 (07/13/06) PAGE 77 DECALS NO. PART NO. PART NAME QTY. REMARKS 1 29020-045 DECAL, WARNING 1 2 29022-033 DECAL, OPERATION 1 3 29020-048 DECAL, WARNING 2 4 29022-035 DECAL, WARNING 2 5 SFSG245020 DECAL, THROTTLE 2 6 512910 DECAL, MQ LOGO 1 7 29020-049 DECAL, WARNING 1 8 SFSP85070 DE[...]

DFG SERIES SURFACE GRINDERS OPERATION AND PARTS MANUAL REV #3 (07/13/06) PAGE 78 Effective : February 22, 2006 TERMS AND CONDITION OF SALE— PARTS PAY M E N T T E R M S Te r m s of p a yment f or p a rt s a re net 3 0 d a y s . FREIGHT POLI CY All p a rt s order s will b e s hipped collec t or prep a id with the ch a rge s a dded to the in voice. [...]

DFG SERIES SURFACE GRINDERS OPERATION AND PARTS MANUAL REV #3 (07/13/06) PAGE 79 NOTE PAGE[...]

OPERATION AND PARTS MANUAL Yo u r Loc a l De a ler i s : HERE’S HOW TO GET HELP PLEA S E HA VE THE MODEL AND S ERIAL NUMBER ON-HAND WHEN CALLING © COPYRIGHT 2009, MUL TIQUIP INC. M u lti qu ip Inc a nd the MQ logo a re regi s tered tr a dem a rk s of M u lti qu ip Inc. a nd m a y not b e us ed, reprod u ced, or a ltered witho u t written per mi [...]