Multiquip SP1CE13H18 manuale d’uso

OPERA TION AND P AR TS MANUAL P/N 35213 THIS MANU AL MUST A CCOMP ANY THE EQ UIPMENT A T ALL TIMES. T o find the latest revision of this publication, visit our website at: www .multiquip.com STREET PRO 1 SERIES MODEL SP1CE13H18 CONCRETE/ASPHAL T SA W (HONDA GX390 GASOLINE ENGINE) Re vision #3 (06/09/08)[...]

P A GE 2 — SP 1 SA W CE— OPERA TION AND P ARTS MANU AL — REV . #3 (06/09/08) Engine exhaust and some of its constituents, and some dust created of California to cause cancer , birth defects and other repr oductive harm. by power sanding, sawing, grinding, drilling and other construction activities contains chemicals kno wn to the State Some e[...]

SP 1 SAW CE— OPERATION AND PARTS MANUAL — REV. #3 (06/09/08) — PAGE 3 Grinding/cutting/drilling of masonry , concrete, metal and other materials with silica in their composition may give off dust or mists containing crystalline silica. Silica is a basic component of sand, quartz, brick clay , granite and numerous other minerals and rocks. Rep[...]

P A GE 4 — SP 1 SA W CE— OPERA TION AND P ARTS MANU AL — REV . #3 (06/09/08) MQ STREET PR O 1 CE SA W — T ABLE OF CONTENTS Proposition 65 W ar ning ............................................. 2 Silicosis/Respirator y W a r nings .................................. 3 T able Of Contents ..................................................... 4[...]

SP 1 SAW CE— OPERATION AND PARTS MANUAL — REV. #3 (06/09/08) — PAGE 5 www .m ultiquip .com Ordering parts has never been easier! Choose from three easy options: WE ACCEPT ALL MAJOR CREDIT CARDS! When ordering parts, please supply: ❒ ❒ ❒ ❒ ❒ Dealer Account Number ❒ ❒ ❒ ❒ ❒ Dealer Name and Address ❒ ❒ ❒ ❒ ❒ Shippin[...]

P A GE 6 — SP 1 SA W CE— OPERA TION AND P ARTS MANU AL — REV . #3 (06/09/08) NO TES[...]

SP 1 SAW CE— OPERATION AND PARTS MANUAL — REV. #3 (06/09/08) — PAGE 7 MQ STREET PR O 1 CE SA W — SAFETY MESSA GE ALERT SYMBOLS Safety precautions should be followed at all times when operating this equipment. F ailure to read, understand and comply with the Safety Messages and Operating Instructions could result in injury to yourself or oth[...]

P A GE 8 — SP 1 SA W CE— OPERA TION AND P ARTS MANU AL — REV . #3 (06/09/08) Accidental Starting AL W A YS place the engine ON/OFF switch in the OFF position, when the saw is not in use. Over Speed Conditions NEVER tamper with the factory settings of the engine gove r nor . P ersonal injur y and damage to the engine or equipment can result if[...]

SP 1 SAW CE— OPERATION AND PARTS MANUAL — REV. #3 (06/09/08) — PAGE 9 The following safety guidelines should always be used when operating the SP 1. SAFETY ■ DO NOT operate or service this equipment bef ore reading this entire manual . T h e manual must be kept available and accessible to the operator . ■ This equipment should not be oper[...]

P A GE 10 — SP 1 SA W CE— OPERA TION AND P ARTS MANU AL — REV . #3 (06/09/08) MQ STREET PR O 1 CE SA W — RULES FOR SAFE OPERA TION ■ Examine blade flanges f or damage and e xcessive w ear . ■ Ensure the cleanliness of the blade before blade is installed. Blade should fit snugly on the shaft and against the inside/ outside blade flanges.[...]

SP 1 SAW CE— OPERATION AND PARTS MANUAL — REV. #3 (06/09/08) — PAGE 11 Figure 1. SP 1 Decals MQ STREET PR O 1 CE SA W — RULES FOR SAFE OPERA TION EMERGENCIES ■ AL W A YS know the location of the nearest fire extinguisher . ■ AL W A YS know the location of the nearest first aid kit . ■ In emergencies always know the location of the nea[...]

P A GE 12 — SP 1 SA W CE— OPERA TION AND P ARTS MANU AL — REV . #3 (06/09/08) MQ STREET PR O 1 CE SA W — SPECIFICA TIONS (SA W) Figure 2. SP 1 Dimensions Side View Front Vie w A C B F G D E * Vibration (at handle) results with SP1 Saw cutting concrete at a depth of 1-1/2 inches (38.1 mm) with an 18" (45.7 cm) blade , FULL THRO TTLE. s [...]

SP 1 SAW CE— OPERATION AND PARTS MANUAL — REV. #3 (06/09/08) — PAGE 13 MQ STREET PR O 1 CE SA W — SPECIFICA TIONS (ENGINE) ) e n i g n E ( s n o i t a c i f i c e p S . 2 e l b a T e n i g n E l e d o M A D N O H 2 T W Q 1 U 0 9 3 X G / 2 T W Q 1 K 0 9 3 X G e p y T e l g n i S , e k o r t s 4 d e l o o c - r i A e n i g n E e n i l o s a G[...]

P A GE 14 — SP 1 SA W CE— OPERA TION AND P ARTS MANU AL — REV . #3 (06/09/08) MQ STREET PR O 1 CE SA W — GENERAL INFORMA TION The MQ Whiteman SP1 series walk-behind saws are designed for wet cutting of concrete or asphalt utilizing Diamond Blades. These saws have been engineered for general and industrial flat sawing applications. The reinf[...]

SP 1 SAW CE— OPERATION AND PARTS MANUAL — REV. #3 (06/09/08) — PAGE 15 MQ STREET PR O 1 CE SA W — CONTROLS & COMPONENTS Figures 4 shows the location of the basic controls or components for the SP 1. Listed below is a brief explanation of each control or component. 1 . Hand Grips/Handlebar – When operating the saw , place both hands on[...]

P A GE 16 — SP 1 SA W CE— OPERA TION AND P ARTS MANU AL — REV . #3 (06/09/08) Figure 5. Engine Controls and Components Initial Servicing The engine (Figure 5) must be checked for proper lubrication and filled with fuel prior to operation. Refer to the manufacturers engine manual for instructions & details of operation and servicing. 1 . F[...]

SP 1 SAW CE— OPERATION AND PARTS MANUAL — REV. #3 (06/09/08) — PAGE 17 MQ STREET PR O 1 CE SA W — PREP ARA TION/PRE-INSPECTION PREP ARA TION / PRE-INSPECTION 1 . Read and fully understand this manual, the saf ety intructions in par ticular , and the engine manufacturer's manual supplied with the saw . 2 . Select the correct blade for e[...]

P A GE 18 — SP 1 SA W CE— OPERA TION AND P ARTS MANU AL — REV . #3 (06/09/08) Figure 10. Pulley Alignment 3 . Check V -belt tension by using a tension meter (3.0 lbs./ 1.36Kg) against the inside belt at a mid point between the two pulleys, or by deflecting the center belt at a mid point 3/16" (5 mm). 4. DO NO T over or under tighten the [...]

SP 1 SAW CE— OPERATION AND PARTS MANUAL — REV. #3 (06/09/08) — PAGE 19 F ailure to thoroughly inspect the diamond blade (Figure 11) for operational safety could result in damage to the blade or the saw , and may cause injury to the user or others in the operating area. Discard damaged or worn blades and replace with fresh blade. Figure 11. Di[...]

P A GE 20 — SP 1 SA W CE— OPERA TION AND P ARTS MANU AL — REV . #3 (06/09/08) W ARNING F ailure to thoroughly inspect the diamond blade for operational safety could result in damage to the blades or the saw and may cause injury to the user or others in the operating area. 2. Blade Guard - Pivot the blade guard front cover all the way back. Th[...]

SP 1 SAW CE— OPERATION AND PARTS MANUAL — REV. #3 (06/09/08) — PAGE 21 MQ STREET PR O 1 CE SA W — BLADE PLA CEMENT 6. Inner Flange (Collar) - This flange is fix ed upon the spindle. The inside surface of the flange must be free of debris and permit a tight closure on the surface of the blade. W ARNING Dropping or forcing the blade onto the [...]

P A GE 22 — SP 1 SA W CE— OPERA TION AND P ARTS MANU AL — REV . #3 (06/09/08) MQ STREET PR O 1 CE SA W — RAISE/LO WER AND DEPTH ST OP Raise/Lower and Depth Stop The saw is equipped with a Raise/Lower and Depth Stop Assembly that is supported by the following components. (Figure 14) Figure 14. Cutting Depth - Raise/Lower System 1 . Adjusting[...]

SP 1 SAW CE— OPERATION AND PARTS MANUAL — REV. #3 (06/09/08) — PAGE 23 MQ STREET PR O 1 CE SA W — INITIAL ST ART -UP DO NOT attempt to operate the saw until this manual has been read and thoroughly understood. Engine operating steps ma y v ar y . See included engine manufacturer's operating manual. Figure 17. Engine Fuel V alve Lever 2[...]

P A GE 24 — SP 1 SA W CE— OPERA TION AND P ARTS MANU AL — REV . #3 (06/09/08) 7 . Grasp the star ter grip (Figure 22) and slowly pull it out. The resistance becomes the hardest at the compression point. Pull the starter grip briskly and smoothly for starting. Figure 22. Starter Grip 9 . Before the saw is placed into operation, run the engine [...]

SP 1 SAW CE— OPERATION AND PARTS MANUAL — REV. #3 (06/09/08) — PAGE 25 MQ STREET PR O 1 CE SA W — OPERA TION AL W A YS keep clear of r otating or mo ving par ts while operating this equipment. W ARNING 4 . When blade has reached full cutting depth, slowly walk behind the saw at a rate that will allow the engine to operate without losing opt[...]

P A GE 26 — SP 1 SA W CE— OPERA TION AND P ARTS MANU AL — REV . #3 (06/09/08) MQ STREET PR O 1 CE SA W — OPERA TION Restarting After Intervention If cutting is interrupted where the engine stops or is turned off while the blade is still in the cut: a. T ur n Engine Off s witches to "OFF" b. Raise the blade out of the cut c. Restar[...]

SP 1 SAW CE— OPERATION AND PARTS MANUAL — REV. #3 (06/09/08) — PAGE 27 Drive Belt Refer to page 16 of this manual for Drive Belt adjustment procedures and Removal and Replacement procedures. See the engine manual supplied with your machine for appropriate engine maintenance schedule and troubleshooting guide for problems. MQ STREET PR O 1 CE [...]

P A GE 28 — SP 1 SA W CE— OPERA TION AND P ARTS MANU AL — REV . #3 (06/09/08) MQ STREET PR O 1 CE SA W — MAINTENANCE Figure 24. Engine Oil Change Dispose of used oil properly . DO NO T pour used oil on the ground, down a drain, or throw in the trash. Used oil can generally be taken to your local recycling center or service station for recla[...]

SP 1 SAW CE— OPERATION AND PARTS MANUAL — REV. #3 (06/09/08) — PAGE 29 MQ STREET PR O 1 CE SA W — OPTIONAL W A TER T ANK 1 6 8 7 9 11 12 10 13 W A TER T ANK KIT (OPTION) 1 . Locate all parts listed in the parts list (see page 45). 2 . Slide the T ank Shelf (item 1, Figure 25) ov er the top of the engine so the recoil starter fits through th[...]

P A GE 30 — SP 1 SA W CE— OPERA TION AND P ARTS MANU AL — REV . #3 (06/09/08) MQ STREET PR O 1 CE SA W — OPTIONAL W A TER T ANK 9 Place the W ater T ank (with the hose assemb led), onto the T ank Shelf so the v alv e and hose are resting in the notch of the top of the T ank Shelf . (Figure 27) 10. Place the Bungee Cord (item 4) o v er the W[...]

SP 1 SAW CE— OPERATION AND PARTS MANUAL — REV. #3 (06/09/08) — PAGE 31 MQ STREET PR O 1 CE SA W — TROUBLESHOO TING (SA W) G N I T O O H S E L B U O R T E D A L B . 5 E L B A T M O T P M Y S M E L B O R P E L B I S S O P N O I T U L O S . g n i t t u c s p o t s r o s w o l s e d a l B g n i e b l a i r e t a m e h t r o f d r a h o o t e d [...]

P A GE 32 — SP 1 SA W CE— OPERA TION AND P ARTS MANU AL — REV . #3 (06/09/08) MQ STREET PR O 1 CE SA W — TROUBLESHOO TING (ENGINE) ) E N I G N E ( G N I T O O H S E L B U O R T . 6 E L B A T M O T P M Y SE S U A C E L B I S S O PN O I T U L O S o n t u b , e l b a l i a v a s i l e u f " , t r a t s o t t l u c i f f i D . " g u l[...]

SP 1 SAW CE— OPERATION AND PARTS MANUAL — REV. #3 (06/09/08) — PAGE 33 MQ STREET PR O 1 CE SA W — TROUBLESHOO TING (ENGINE) ) D E U N I T N O C , E N I G N E ( G N I T O O H S E L B U O R T . 6 E L B A T M O T P M Y SE S U A C E L B I S S O PN O I T U L O S r e p o r p s i n o i s s e r p m o c " r e w o p n i k a e W " . e r i f [...]

P A GE 34 — SP 1 SA W CE— OPERA TION AND P ARTS MANU AL — REV . #3 (06/09/08) The contents and part numbers listed in the parts section are subject to change without notice . Multiquip does not guarantee the availibility of the parts listed. When ordering a part that has more than one item number listed, check the remarks column f or help in [...]

SP 1 SAW CE— OPERATION AND PARTS MANUAL — REV. #3 (06/09/08) — PAGE 35 MQ STREET PR O 1 CE SA W — SUGGESTED SP ARE P ARTS MQ STREET PRO 1 CE CONCRETE/ASPHAL T SA W 1 T O 3 UNITS WITH HONDA GX390K1QWT2/GX390U1QWT2 ENGINES 1 to 3 Units Qt y . ...... P/N ........................... Description 3 20478 ................... HAND GRIP 4 2621 .....[...]

P A GE 36 — SP 1 SA W CE— OPERA TION AND P ARTS MANU AL — REV . #3 (06/09/08) MQ STREET PR O 1 SA W — DECALS DECALS E n g i n e ex h a u s t a n d s o m e o f i t s c o n s t i t u e n t s , a n d s o m e d u s t c r e a t e d o f C a l i f o r n i a t o c a u s e c a n c e r ,b i r t h d e f e c t s a n d o t h e r r e p r o d u c t i v e [...]

SP 1 SAW CE— OPERATION AND PARTS MANUAL — REV. #3 (06/09/08) — PAGE 37 MQ STREET PR O 1 CE SA W — DECALS DECALS NO . P AR T NO . P AR T NAME QTY . REMARKS 1 35137 DECAL, W ARNING, READ MANU AL1 .......... SAFETY ITEM 2 20525 DECAL, PR OP 65 W ARNING ......... 1 .......... SAFETY ITEM 3 13118 DECAL, PO WDER COA TED 1 4 25782 DECAL, MQ DIAMON[...]

P A GE 38 — SP 1 SA W CE— OPERA TION AND P ARTS MANU AL — REV . #3 (06/09/08) MQ STREET PR O 1 CE SA W — ENGINE, BEL TS AND PULLEYS ENGINE, BEL TS AND PULLEYS[...]

SP 1 SAW CE— OPERATION AND PARTS MANUAL — REV. #3 (06/09/08) — PAGE 39 MQ STREET PR O 1 CE SA W — ENGINE, BEL TS AND PULLEYS ENGINE, BEL TS AND PULLEYS NO . P AR T NO . P AR T NAME QTY . REMARKS 1 15103 ENGINE 13 HP HOND A RED 1 2 9152 K E Y , 1/4 X 1-3/4 1 3 0669 A SCREW . HHCS 5/16-18 x 2-1/4" 4 4 0300B FL A T W ASHER 5/16" 1 0 [...]

P A GE 40 — SP 1 SA W CE— OPERA TION AND P ARTS MANU AL — REV . #3 (06/09/08) UNDERCARRIAGE ASSY MQ STREET PR O 1 CE SA W — UNDERCARRIA GE ASSY .[...]

SP 1 SAW CE— OPERATION AND PARTS MANUAL — REV. #3 (06/09/08) — PAGE 41 UNDERCARRIAGE ASSY MQ STREET PRO 1 CE SA W — UNDERCARRIA GE ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 1 08233-005 LOCKNUT , 5/16 - 18 1 2 18637-001 KNOB 1 3 0161 D HEX NUT , 5/16 - 18 3 4 25496 BU S HI N G 1 5 28808-002 CRANK HANDLE 1 6 26164-001 LOCK PIN 1 7 456[...]

P A GE 42 — SP 1 SA W CE— OPERA TION AND P ARTS MANU AL — REV . #3 (06/09/08) MQ STREET PR O 1 CE SA W — BLADE ASSEMBL Y & W A TER SYSTEM BLADE ASSEMBL Y & W A TER SYSTEM 1 PULLEY ASSEMBL Y . SEE P AGE 30. 1 33 34 40 37 41 36 1 2 2 3 3 4 4 5 7 6 8 11 13 14 22 24 25 2 21 27 16 16 18 19 20 17 26 28 26 25 30 32 31 26 35 35 30 38 29 39 [...]

SP 1 SAW CE— OPERATION AND PARTS MANUAL — REV. #3 (06/09/08) — PAGE 43 MQ STREET PR O 1 CE SA W — BLADE ASSEMBL Y & W A TER SYSTEM BLADE ASSEMBL Y & W A TER SYSTEM NO . P AR T NO . P AR T NAME QTY . REMARKS 1 22129-001 CLAMP 2 2 0948 F L A T W ASHER, 1/4 5 3 0181B LOCK W ASHER 1/4 5 4 0949 HEX NUT 1/4 - 20 5 5 0424 SCREW , HHCS 1/4 [...]

P A GE 44 — SP 1 SA W CE— OPERA TION AND P ARTS MANU AL — REV . #3 (06/09/08) MQ STREET PR O 1 CE SA W — POINTER ASSEMBL Y POINTER ASSEMBL Y 1 2 3 7 8 4 6 5 5[...]

SP 1 SAW CE— OPERATION AND PARTS MANUAL — REV. #3 (06/09/08) — PAGE 45 MQ STREET PR O 1 CE SA W — POINTER ASSEMBL Y POINTER ASSEMBL Y NO . P AR T NO . P AR T NAME QTY . REMARKS 1 21017 SCREW , POINTER ARM 1 2 29043-001 WHEEL, POINTER 1 3 1007 N U T , HEX JAM 3/8 - 16 2 4 1456 N U T , HEX FINISH 3/8 - 16 2 5 10133 N U T , NYLOC 3/8 - 16 2 6 [...]

P A GE 46 — SP 1 SA W CE— OPERA TION AND P ARTS MANU AL — REV . #3 (06/09/08) MQ STREET PR O 1 CE SA W — W A TER T ANK (OPTIONAL) 2 1 8 6 9 7 5 2 14 15 13 11 10 12 4 3 W A TER T ANK (OPTION)[...]

SP 1 SAW CE— OPERATION AND PARTS MANUAL — REV. #3 (06/09/08) — PAGE 47 MQ STREET PR O 1 CE SA W — W A TER T ANK (OPTIONAL) W A TER T ANK (OPTION) NO . P AR T NO . P AR T NAME QTY . REMARKS 1 29290-351 SHELF , T ANK 1 2 14821-001 CLAMP , HOSE 2 3 27040-001 HOSE, CLEAR PVC 19" (482.6mm) 1 4 28862-001 CORD , BUNGEE 1 5 24778-003 CONNECTOR[...]

P A GE 48 — SP 1 SA W CE— OPERA TION AND P ARTS MANU AL — REV . #3 (06/09/08) AIR CLEANER ASSY . HOND A GX390K1QWT2/GX390U1QWT2 ENG.— AIR CLEANER ASSY .[...]

SP 1 SAW CE— OPERATION AND PARTS MANUAL — REV. #3 (06/09/08) — PAGE 49 HOND A GX390K1QWT2/GX390U1QWT2 ENG.— AIR CLEANER ASSY . AIR CLEANER ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 1      16271ZE2000 GASKET , ELBOW 1 1 ◊ ◊ ◊ ◊ ◊ 16271ZE2010 GASKET , ELBOW 1 2 17210ZE3010 ELEMENT , AIR CLEANER ...............[...]

P A GE 50 — SP 1 SA W CE— OPERA TION AND P ARTS MANU AL — REV . #3 (06/09/08) CAMSHAFT ASSY . HOND A GX390K1QWT2/GX390U1QWT2 ENG.— CAMSHAFT ASSY .[...]

SP 1 SAW CE— OPERATION AND PARTS MANUAL — REV. #3 (06/09/08) — PAGE 51 HOND A GX390K1QWT2/GX390U1QWT2 ENG.— CAMSHAFT ASSY . CAMSHAFT ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 1 14100ZF6W01 CAMSHAFT ASSEMBL Y .......................... 1 ......... INCLUDES ITEM W/ * 2 14410ZE3013 ROD , PUSH 2 3 14431ZE2010 ARM, V AL VE ROCKER 2 4 144[...]

P A GE 52 — SP 1 SA W CE— OPERA TION AND P ARTS MANU AL — REV . #3 (06/09/08) CARBURET OR ASSY . HOND A GX390K1QWT2/GX390U1QWT2 ENG.— CARBURET OR ASSY .[...]

SP 1 SAW CE— OPERATION AND PARTS MANUAL — REV. #3 (06/09/08) — PAGE 53 HOND A GX390K1QWT2/GX390U1QWT2 ENG.— CARBURET OR ASSY . CARBURET OR ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 1 16010ZE2812 CARBURET OR, GASKET SET 1 INCLUDES ITEMS W/ + 2 $ 16011ZA0931 V A L V E SE T , FL OA T 1 3 $ 16013ZA0931 FL OA T SE T 1 4 $ 16015ZE8005 CHA[...]

P A GE 54 — SP 1 SA W CE— OPERA TION AND P ARTS MANU AL — REV . #3 (06/09/08) CONTROL ASSY . HOND A GX390K1QWT2/GX390U1QWT2 ENG.— CONTROL ASSY .[...]

SP 1 SAW CE— OPERATION AND PARTS MANUAL — REV. #3 (06/09/08) — PAGE 55 HOND A GX390K1QWT2/GX390U1QWT2 ENG.— CONTROL ASSY . CONTROL ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 2 16551ZE3000 ARM, GO VERNOR 1 3 16555ZE3000 ROD , GO VERNOR 1 4 16561ZE3000 SPRING, GO VERNOR 1 5 16562ZE3000 SPRING, THR O TTLE RETURN 1 6 16570ZE3W20 CONTROL [...]

P A GE 56 — SP 1 SA W CE— OPERA TION AND P ARTS MANU AL — REV . #3 (06/09/08) CRANKCASE CO VER ASSY . HOND A GX390K1QWT2/GX390U1QWT2 ENG.— CRANKCASE ASSY .[...]

SP 1 SAW CE— OPERATION AND PARTS MANUAL — REV. #3 (06/09/08) — PAGE 57 HOND A GX390K1QWT2/GX390U1QWT2 ENG.— CRANKCASE ASSY . CRANKCASE CO VER ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 2      11300ZE3602 CO VER ASSY ., CRANKCASE ......................... 1 ................ S/N 3287256 AND BELOW ........................[...]

P A GE 58 — SP 1 SA W CE— OPERA TION AND P ARTS MANU AL — REV . #3 (06/09/08) CRANKSHAFT ASSY . HOND A GX390K1QWT2/GX390U1QWT2 ENG.— CRANKSHAFT ASSY .[...]

SP 1 SAW CE— OPERATION AND PARTS MANUAL — REV. #3 (06/09/08) — PAGE 59 HOND A GX390K1QWT2/GX390U1QWT2 ENG.— CRANKSHAFT ASSY . CRANKSHAFT ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 2      13310ZF6W10 CRANKSHAFT .......................................... 1 ......... INCLUDES ITEM W/ * 2 ◊ ◊ ◊ ◊ ◊ 13310ZF6W11 CR[...]

P A GE 60 — SP 1 SA W CE— OPERA TION AND P ARTS MANU AL — REV . #3 (06/09/08) CYLINDER BARREL ASSY . HOND A GX390K1QWT2/GX390U1QWT2 ENG.— CYLINDER B ARREL ASSY .[...]

SP 1 SAW CE— OPERATION AND PARTS MANUAL — REV. #3 (06/09/08) — PAGE 61 HOND A GX390K1QWT2/GX390U1QWT2 ENG.— CYLINDER B ARREL ASSY . CYLINDER BARREL ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 1      12000ZF6W13 CYLINDER ASSY . (ALERT) .................... 1 .............. INCLUDES ITEMS W/ % 1 ◊ ◊ ◊ ◊ ◊ 12000Z[...]

P A GE 62 — SP 1 SA W CE— OPERA TION AND P ARTS MANU AL — REV . #3 (06/09/08) CYLINDER HEAD ASSY . HOND A GX390K1QWT2/GX390U1QWT2 ENG.— CYLINDER HEAD ASSY .[...]

SP 1 SAW CE— OPERATION AND PARTS MANUAL — REV. #3 (06/09/08) — PAGE 63 HOND A GX390K1QWT2/GX390U1QWT2 ENG.— CYLINDER HEAD ASSY . CYLINDER HEAD ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 1      12200ZF6W01 CYLINDER HEAD ............................................. 1 ................ INCLUDES ITEMS W/ * 1 ◊ ◊ ◊ ?[...]

P A GE 64 — SP 1 SA W CE— OPERA TION AND P ARTS MANU AL — REV . #3 (06/09/08) F AN CO VER ASSY . HOND A GX390K1QWT2/GX390U1QWT2 ENG.— F AN CO VER ASSY .[...]

SP 1 SAW CE— OPERATION AND PARTS MANUAL — REV. #3 (06/09/08) — PAGE 65 HOND A GX390K1QWT2/GX390U1QWT2 ENG.— F AN CO VER ASSY . F AN CO VER ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 4 16731ZE2003 CLIP , TUBE 1 7 19610ZE3010ZB C O VER, F AN *NH1* (BLACK) 1 1 0 19631ZE3W00 SHROUD 1 13      36100ZH7003 SWITCH ASSY ., ENGI[...]

P A GE 66 — SP 1 SA W CE— OPERA TION AND P ARTS MANU AL — REV . #3 (06/09/08) FL YWHEEL ASSY . HOND A GX390K1QWT2/GX390U1QWT2 ENG.— FL YWHEEL ASSY .[...]

SP 1 SAW CE— OPERATION AND PARTS MANUAL — REV. #3 (06/09/08) — PAGE 67 HOND A GX390K1QWT2/GX390U1QWT2 ENG.— FL YWHEEL ASSY . FL YWHEEL ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 1 19511ZE3000 F AN, COOLING 1 3 28450ZE3W11 PULLEY , ST ARTER (SCREEN GRID) 1 7 31100ZE3701 FL YWHEEL 1 10      90201ZE3V00 NUT , SPECIAL (16M[...]

P A GE 68 — SP 1 SA W CE— OPERA TION AND P ARTS MANU AL — REV . #3 (06/09/08) FUEL T ANK ASSY . HOND A GX390K1QWT2/GX390U1QWT2 ENG.— FUEL T ANK ASSY .[...]

SP 1 SAW CE— OPERATION AND PARTS MANUAL — REV. #3 (06/09/08) — PAGE 69 HOND A GX390K1QWT2/GX390U1QWT2 ENG.— FUEL T ANK ASSY . FUEL T ANK ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 1 16854ZH8000 R UBBER, SUPPOR TER (107MM) 1 3 16955ZE1000 JOINT , FUEL T ANK 1 6      17510ZE3010ZB T ANK, FUEL *NH1* 1 6 ◊ ◊ ◊ ◊ ?[...]

P A GE 70 — SP 1 SA W CE— OPERA TION AND P ARTS MANU AL — REV . #3 (06/09/08) IGNITION COIL ASSY . HOND A GX390K1QWT2/GX390U1QWT2 ENG.— IGNITION COIL ASSY .[...]

SP 1 SAW CE— OPERATION AND PARTS MANUAL — REV. #3 (06/09/08) — PAGE 71 HOND A GX390K1QWT2/GX390U1QWT2 ENG.— IGNITION COIL ASSY . IGNITION COIL ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 1      30500ZF6W02 COIL ASSY ., IGNITION 1 1 ◊ ◊ ◊ ◊ ◊ 30500ZF6W02 COIL ASSY ., IGNITION ...................................[...]

P A GE 72 — SP 1 SA W CE— OPERA TION AND P ARTS MANU AL — REV . #3 (06/09/08) MUFFLER ASSY . HOND A GX390K1QWT2/GX390U1QWT2 ENG.— MUFFLER ASSY .[...]

SP 1 SAW CE— OPERATION AND PARTS MANUAL — REV. #3 (06/09/08) — PAGE 73 HOND A GX390K1QWT2/GX390U1QWT2 ENG.— MEFFLER ASSY . MUFFLER ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 2 18310ZE2W61 MUFFLER 1 3 18320ZE2W61 PRO TECT OR, MUFFLER 1 5 18330ZE2W00 PIPE, EX. 1 6      18331ZE3810 CA P , MUFFLER 1 6 ◊ ◊ ◊ ◊ ◊ 1[...]

P A GE 74 — SP 1 SA W CE— OPERA TION AND P ARTS MANU AL — REV . #3 (06/09/08) PIST ON ASSY . HOND A GX390K1QWT2/GX390U1QWT2 ENG.— PIST ON ASSY .[...]

SP 1 SAW CE— OPERATION AND PARTS MANUAL — REV. #3 (06/09/08) — PAGE 75 HOND A GX390K1QWT2/GX390U1QWT2 ENG.— PIST ON ASSY . PIST ON ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 1 13010ZF6005 RING SET , PIST ON (STD) 1 1 13011ZF6005 RING SET , PIST ON (0.25) 1 1 13012ZF6005 RING SET , PIST ON (0.50) 1 1 13013ZF6005 RING SET , PIST ON (0.[...]

P A GE 76 — SP 1 SA W CE— OPERA TION AND P ARTS MANU AL — REV . #3 (06/09/08) RECOIL ST ARTER ASSY . HOND A GX390K1QWT2/GX390U1QWT2 ENG.— RECOIL ST A TER ASSY .[...]

SP 1 SAW CE— OPERATION AND PARTS MANUAL — REV. #3 (06/09/08) — PAGE 77 HOND A GX390K1QWT2/GX390U1QWT2 ENG.— RECOIL ST A TER ASSY . RECOIL ST ARTER ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 1 28400ZE3W01ZB ST AR TER ASSY ., RECOIL *NH1* (BLA CK) .............. 1 ...... INCLUDES ITEMS W/ * 2 * 28410ZE3W01ZB CASE, RECOIL ST AR TER *NH1[...]

P A GE 78 — SP 1 SA W CE— OPERA TION AND P ARTS MANU AL — REV . #3 (06/09/08) LABELS ASSY . HOND A GX390K1QWT2/GX390U1QWT2 ENG.— LABELS ASSY .[...]

SP 1 SAW CE— OPERATION AND PARTS MANUAL — REV. #3 (06/09/08) — PAGE 79 HOND A GX390K1QWT2/GX390U1QWT2 ENG.— LABELS ASSY . RECOIL ST ARTER ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 1 28400ZE3W01ZB ST AR TER ASSY ., RECOIL *NH1* (BLA CK) .............. 1 ...... INCLUDES ITEMS W/ * 2 * 28410ZE3W01ZB CASE, RECOIL ST AR TER *NH1* (BLA CK[...]

P A GE 80 — SP 1 SA W CE— OPERA TION AND P ARTS MANU AL — REV . #3 (06/09/08) P A YMENT TERMS T erms of payment f or par ts are net 30 days. FREIGHT POLICY All parts orders will be shipped collect or prepaid with the charges added to the invoice. All shipments are F .O .B. point of origin. Multiquip’ s responsibility ceases when a signed ma[...]

SP 1 SAW CE— OPERATION AND PARTS MANUAL — REV. #3 (06/09/08) — PAGE 81 NO TE P A GE[...]

OPERA TION AND P AR TS MANUAL Y our Local Dealer is: HERE’S HOW TO GET HELP PLEASE HA VE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING © COPYRIGHT 2008, MUL TIQUIP INC. Multiquip Inc, the MQ logo and the Diamond Back logo are registered trademarks of Multiquip Inc. and may not be used, reproduced, or altered without written permission. All ot[...]