National Instruments RT Series manuale d’uso

RT Series DAQ Device User Manual RT Series DAQ Device User Manual April 2001 Edition Part Number 322635 B-01[...]

Support Worldwide Technical Support and Product Information ni.com National Instruments Corporate Headquarters 11500 North Mopac Expressway Austin, Texas 78759-3504 USA Tel: 512 794 0100 Worldwide Offices Australia 03 9879 5166, Austria 0662 45 79 90 0, Belgium 02 757 00 20, Brazil 011 284 5011, Canada (Calgary) 403 274 9391, Canada (Ottawa) 613 23[...]

Important Information Warranty The RT Series DAQ hardware is warranted against defects in mat erials and workmanship for a period of one year from the date of shipment, as evidenced by receipts or other documentation. National Instruments will, at its option, repair or replace equipment that proves to be defecti ve during the warranty period. This [...]

Compliance FCC/Canada Radio Frequency Interference Compliance* Determining FCC Class The Federal Communication s Commission (FCC) has rules to protect wireless comm unications from interference. The FCC places digital electronics into two classes. These classes ar e known as Class A (for use in industrial- commercial locations only) or Class B (for[...]

interference to radio or telev ision reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measur es: • Reorient or relocate the receiving a ntenna. • Increase the separation between the equipment and receiver. • Connect the equipment i[...]

© National Instruments Corporation vii RT Series DAQ Device User Manual Contents About This Manual Conventions ............ ........... .............. ............ ........... .............. ........... ............ .............. .... i x Related Documentation ............... ........... ........... .............. ............ .............. ....[...]

Contents RT Series DAQ Device U ser Manual viii ni.com Real-Time Programming .......... .............. ........... ............ .............. ........... ........... ............ 4-4 Running a VI at Time-Cri tical Priority wit hout the RT Development System ...... ............... ........... .............. ........... ............ .............. 4[...]

© National Instruments Corporation ix RT Series DAQ Device User Manual About This Manual This manual contains inform ation about the R T Series Data Acquisition (D A Q) devices and w orking w ith LabVIEW Real-Time (R T). The R T Series D A Q hardware consists of the following de vices: • PCI-7030/6040E • PCI-7030/6030E • PCI-7030/6533 • PX[...]

About This Man ual RT Series DAQ Device U ser Manual x ni.com programs, subprograms, subroutines, device names, functions, operations, v ariables, fil enames and extensio ns, and code excerpts. Related Documentation The following documents contain information that you might find helpful as you read this manual: • LabVIEW Real- Time User Manual ?[...]

© National Instruments Corporation 1-1 R T Series D AQ Device User Manual 1 Introduction This chapter describes the RT Series DAQ devices, lists what you need to get started, explains how to unpack your RT Series DAQ device, and describes the softwa re you need to use. About the R T Series The RT Series DAQ devices are multifunction DAQ devices wi[...]

Chapter 1 Introduction RT Series DAQ Device User Manual 1-2 ni.com What Y ou Need to Get Started To set up and use your RT Series DAQ device, you need the follo wing: ❑ One of the follo wing de vices: – PXI-7030/6 XXX – PCI-7030/6 XXX ❑ This manual ❑ Hardware user manual for your D A Q daughterboard, s h o w ni nT a b l e1 - 1 ❑ LabVIEW[...]

Chapter 1 Introduction © National Instruments Corporation 1-3 R T Series D AQ Device User Manual Unpacking Your RT Series DAQ device is shipped in an antistatic packag e to prevent electrostatic damage to the device. Electrostatic discharge can damage several components on the device. To avo id such damage in handling the device, take the foll owi[...]

© National Instruments Corporation 2-1 R T Series D AQ Device User Manual 2 Installation and Configuration This chapter explains how to install and confi gure your RT Series DAQ hardware. Installing th e Hardware You can install the RT Se ries DAQ device in any available expansion slot in your computer or PXI chassis. To reduce noise, however, lea[...]

Chapter 2 Installation and Configuration RT Series DAQ Device User Manual 2-2 ni.com Y our R T Series DA Q dev ice is installed. Y ou are no w ready to configure your software. PXI Installation Complete the following steps to install your RT Series PXI board. 1. T urn off and unplug your computer . 2. Choose two adjacent unused PXI slots in your sy[...]

Chapter 2 Installation and Configuration © National Instruments Corporation 2-3 R T Series D AQ Device User Manual Figure 2-1. Measurement & Automation Explorer Notice that MAX assigns s eparate de vice numbers to th e PCI/PXI-7030 de v ice and the D A Q daughterboard, as shown in Figure 2-1. The D A Q daughterboard is sho wn as a separate dev[...]

Chapter 2 Installation and Configuration RT Series DAQ Device User Manual 2-4 ni.com daughterboard directly , e ven though the D A Q daughterboard is configured as a separate device. Only LabVIEW R T applications targeted to the R T Series D A Q device can access the D A Q daughterboard. Tip If you want to test whether the DA Q daughterboard is wor[...]

© National Instruments Corporation 3-1 R T Series D AQ Device User Manual 3 Hardware Over view This chapter describes the PCI and PXI RT Series DAQ hardware. You can find most of the hardware information you need in your DAQ device user manual. Table 1-1, RT Series DAQ Device and Correspondin g DAQ Device Manual , lists the DAQ devi ce user manual[...]

Chapter 3 Hardware Over view RT Series DAQ Device User Manual 3-2 ni.com Figure 3-2. PXI RT Series Data Acquisition Hardware Processor Board The 7030 processor board contains a microprocessor and support circuitry, as shown in Figure 3-3. The support circuit ry includes a chipset with PCI controller and ISA bridge, main memory (DRAM), L2 cache (SRA[...]

Chapter 3 Hardware Over view © National Instruments Corporation 3-3 R T Series D AQ Device User Manual Figure 3-3. RT Series Processor Board Diagram Embedded ISA Bus Embedded CPU Bus Processor Board BIOS ISA Bridge Controller Shared Memory CPU I/O Daughterboard SRAM/DRAM Shared Memory Interface BIOS Extension Cache Memory PCI Controller Host PCI B[...]

Chapter 3 Hardware Over view RT Series DAQ Device User Manual 3-4 ni.com DAQ Daughterboard The daughterboard in the RT Series system pro vides the DAQ functionality. Each daught erboard is a National Instrument s DAQ device with some mechanical modifications to allow it to connect to the processor board. You can expect the same high performance and[...]

Chapter 3 Hardware Over view © National Instruments Corporation 3-5 R T Series D AQ Device User Manual information about how to use the R TSI signals. Tab le 1-1, RT Series DAQ Device and Corresponding DAQ Device Manual , lists the correspon ding manual for each available daughterboard. LEDs The RT Series processor board has two LEDs. You can use [...]

© National Instruments Corporation 4-1 R T Series D AQ Device User Manual 4 LabVIEW R T Programming This chapter provides an overview of using LabVIEW Real-Time (RT) an d your RT Series DA Q hardware. T argeting LabVIEW R T and Downloading VIs In LabVIEW RT, select Operate » Switch Execution Target to access the Select Target Platform dialog box,[...]

Chapter 4 LabVIEW R T Programming RT Series DAQ Device User Manual 4-2 ni.com Select Target Platform dialog box to launch MAX and con figure your R T Series D A Q devices . Resetting the R T Series DAQ Device Resetting the RT Series DAQ device is necessary only after you first t urn on the system or if communication wit h the RT Engine cannot be es[...]

Chapter 4 LabVIEW RT Progr amming © National Instruments Corporation 4-3 R T Series D AQ Device User Manual T o disable the Select T arget Platform dialog box, specify the target platform in the command line argument of your built ex ecutab le using –target . For e xample, c:mybuiltapp_rtengine.exe -target D AQ::3 (fo r device 3) or to run the [...]

Chapter 4 LabVIEW R T Programming RT Series DAQ Device User Manual 4-4 ni.com Real-T ime Programming This section provides an overview of real-tim e programming using your RT Series DAQ hardware. Running a VI at T ime-Critical Priority without the R T Development System Instead of using TCP/IP or VI Server t o communicate data to a host PC applicat[...]

Chapter 4 LabVIEW RT Progr amming © National Instruments Corporation 4-5 R T Series D AQ Device User Manual hardware for these changes to take ef fect. How ever, unlike virtual channels, you can set device parameters or accessory configuration information programmatically inside a VI wit hout running MAX. Therefore, you can programmatically change[...]

© National Instruments Corporation A-1 RT Series DAQ Device User Manual A Specifications This appendix lists t he specifications of the embedded processor syst em. Processor Processor ............. .......................... ......... AMD 486 DX5 32-bit architecture Processor clock speed ............. ............... 133 MHz CPU bus speed ........[...]

Appendix A Specifications RT Series DAQ Device User Manual A-2 ni.com Power Requirement PCI-7030 only (without daughterboard) .......... .............. .1.9 A at +5 VDC (±5%) PXI-7030 only (without daughterboard) .......... .............. .2.0 A at +5 VDC (±5%) Note T o calculate the total power requirement, add the p rocessor board requirement f[...]

© National Instruments Corporation B-1 RT Series DAQ Device User Manual B T echnical Support Resources W eb Support National Instruments W eb support is your first stop for help in solving installation, configuration, and application pro blems and questions. O nline problem-solving and di agnostic resources include frequ ently asked questions, kno[...]

Appendix B T echnical Support Resources RT Series DAQ Device User Manual B-2 ni.com W orldwide Support National Instruments has of fices located around the world to help address your support needs. Y ou can access our branch of fice W eb sites from the W orldwide Of fices section of ni.com . Branch off ice W eb sites provide up-to-date contact info[...]

© National Instruments Corporation G-1 RT Series DAQ Device User Manual Glossar y B BIOS basic input/output system — BIOS functions are t he fundamental le vel of an y PC or compatible co mputer . BIOS functions embo dy the basic operations needed for successful use of the computer hardware resources. bus the group of conductors that in terconne[...]

Glossary RT Series DAQ Device User Manual G-2 ni.com de v ice Instrument or control ler that is addressable as a single entity and controls or monitors real-world I/O points. A device is often connected to the host computer through some type of communicatio n network or can be a plug-in de vice. For data acquisition (D A Q) applicatio ns, a D A Q d[...]

Glossary © National Instruments Corporation G-3 RT Series DAQ Device User Manual V VI SA virtual instrume nt software archi tecture — an e wd r i v e rs o f t w a r e architecture developed by Nation a l Instruments to u nify instrumentation software GPIB, DAQ, a nd VXI. It has been accepted as a standard fo r VXI by the VX Iplug&p lay Syste[...]

© National Instruments Corporation I-1 RT Series DAQ Device User Manual Index B board configuration, 2-2 to 2-4 bus interface specifications, A-1 C command-line arguments, 4-2 to 4-3 communication host-embedded communication shared memory, A-1 host-to-RT Series DAQ device communication, 3-4 configuration board configuration, 2-2 to 2-4 real-time p[...]

Index RT Series DAQ Device User Manual I-2 ni.com LabVIEW RT programming, 4-1 to 4-5 creating stand-alone executables, 4-2 to 4-3 downloading VIs, 4-1 to 4-2 LabVIEW functions not supported on DAQ hardware, 4 -3 real-time programming, 4-4 to 4-5 configuration issues, 4-4 to 4-5 running VI at time-critical priority, 4-4 shared memory, 4-4 resetting [...]

Index © National Instruments Corporation I-3 RT Series DAQ Device User Manual S shared memory host-embedded communication shared memory, A-1 real-time programming, 4-4 software programming ch oices, 1-3 specifications, A-1 to A-2 stand-alone executables, creating, 4-2 to 4-3 command-line arguments, 4-2 to 4-3 embedded applications, 4 -2 system int[...]