NEC MDG5-BNDN1 manuale d’uso

MD2 1 1G5[...]

Disclaimer * Windows and MS-DOS are trademarks and/or registered trademarks of Microsoft Corporation in the United States and/or other countries. * VESA is a trademark of the V ideo Electronics Standard Association. * All other products and company names are trademarks of their respective owners.[...]

English[...]

English-1 English Inde x Registration Information ...............................................................................................................English-2 Intended Use ................................................................................................................................English-4 Recommended use ............[...]

English-2 Registration Inf ormation Dec laration Means of Conformity Device Classifi cation: Class I, non-measuring function Applicable Rules: Annex IX, Rules 1.4 (Section 1) and 1.1 (Section 3) Product Name: MD21 1G5 21.3” Diagnostic Imaging LCD Monitor Model Number: MD21 1G5 UMDNS Code: 16-603 NEC Display Solutions Europe GmbH declares that th[...]

English-3 English TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT T O RAIN OR MOISTURE. ALSO, DO NOT USE THIS UNIT’S POLARIZED PLUG WITH AN EXTENSION CORD RECEPT ACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULL Y INSER TED. REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOL T AGE COMPONENTS INSIDE. REFER SERVICING TO QUALIFIED SE[...]

English-4 Intended Use The MD21 1G5 grayscale display is intended to be used for displaying and viewing of digital images for diagnosis, including digital mammography , by trained physicians. Caution: The MD21 1G5 grayscale display cannot be used for a life-support system. This device is designed as component of a fi nal system which is in complia[...]

English-5 English Recommended use Safety Precautions and Maintenance FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN SETTING UP AND USING THE LCD GRA YSCALE MONITOR: W ARNING: Do not modify this equipment without authorization of the manufacturer . W ARNING: T o disconnect this product from the mains supply disconnect the mains plug from th[...]

English-6 Image P ersistence: Image persistence exists, when a residual or “ghost” image of a previous image remains visible on the screen. Unlike with CRT monitors, image persistence on LCD monitors is not permanent, but constant images being displayed for a long period of time should be avoided. T o alleviate image persistence, turn off the m[...]

English-7 English Contents Y our new NEC monitor box* should contain the following: • MD21 1G5 monitor with tilt/swivel/pivot/height adjust stand • Power Cord • Video Signal Cable (DVI-D to DVI-D cable)* 1 • DisplayPort cable • USB Cable • Quick Reference Guide Quick Reference Guide DVI-D to DVI-D cable* 1 DisplayPort cable Power Cord* [...]

English-8 Quic k Star t T o connect the LCD monitor to your system, follow these instructions: NO TE: Make sure to read “Recommended Use” before installation. In order to display the maximum resolution, a display controller that can output a resolution of 2048 x 2560 is needed. 1. T urn off the power to your computer . 2. For a PC with D VI dig[...]

English-9 English 5. T o keep the cables neatly organized, place them into the cable management system that is built into the stand. Place the cables in the hooks fi rmly and evenly ( Figure D ). Figure D 6. Slide down the cable cover ( Figure E ). 7. Please check that you can still rotate, raise and lower the monitor screen, when you have install[...]

English-10 Contr ols 1 Power Switch T o turn the monitor on and off. 2 LED Indicates that the power is on. T urns off automatically , when the luminance is stabilized. 3 Front Sensor For luminance stabilization and calibration. 4 Ambient Light Sensor Measures ambient light during calibration process. 5 + (plus) Button T o open the OSD (On Screen Di[...]

English-11 English Specifi cations Monitor Specifi cations MD211G5 Notes LCD panel color Clear Base LCD 21.3-inch (54 cm), monochrome, TFT active matrix, anti-glare Pixel pitch (H x V) 0.165 x 0.165 mm Display area (H x V) 337.9 x 422.4 mm Pixel (H x V) 2048 x 2560 Grayscale 256 steps of gray out of a palette of 12277 Backlight Edge Light T ype w[...]

English-12 Additional Installation Inf ormation Adv anced OSD Several control functions are available by entering the advanced OSD. These control functions are additional OSD menu items, which are always accessible after opening the standard OSD. Control Function Description EDID Change the picture format to be recognized by the operating system ?[...]

English-13 English 3. After selecting your preferred EDID mode, hold down the (+) plus button and the (-) minus button simultaneously for over 2 seconds again. Then displayed (Information) OSD and Selected (Landscape) EDID data is displayed as (FIXED). Then confi rm the EDID line (Portrait/Landscape) on the “INFORMA TION” OSD. 4. Click the (+)[...]

English-14 How to Change Confi guration (Preset 1, 2, 3) The NEC model MD21 1G5 is shipped with 3 factory preset confi gurations, as listed below . Confi guration Luminance (cd/m 2 ) Gamma Remark Maximum Minimum Ambient 1 500 1.0 0.0 DICOM [Factory Default] 2 550 1.0 0.0 DICOM 3 400 1.0 0.0 DICOM The confi guration can be changed via an OSD men[...]

English-15 English P erforming the DICOM conf ormance test This function is available only when the display has been calibrated to DICOM GSDF . Performing the DICOM conformance test ensures DICOM conformance of the display by measuring and checking the display properties. The DICOM conformance test is recommended to be performed after 60 minutes of[...]

English-16 4. Showing the test results When the measurement is completed, the test results are shown. T est results A. T est results Passed: Max. deviation ≤ 10% Failed: Max. deviation > 10% Canceled: T est has been canceled. Passed(!), Failed(!) “(!)” following Passed and Failed indicates that the recommended condition has not been met. ([...]

English-17 English Attaching a wall mount or m ulti-display mounting arm The tilt and swivel stand, as shipped with the display , is interchangeable with commercially available wall mounts or multi-dis play mounting arms that: • Come with a mount plate with 4 slotted screw holes at 100 mm x 100 mm and • Can bear the total weight of the LCD pane[...]

English-18 NEC DISPLA Y SOLUTIONS is strongly committed to environmental protection and sees recycling as one of the company’ s top priorities in trying to minimize the burden placed on the environment. We are engaged in developing environmentally- friendly products, and always strive to help defi ne and comply with the latest independent standa[...]

NEC Display Solutions, Ltd. 4-28, Mita 1-chome, Minato-ku, T okyo, Japan NEC Display Solutions of America 500 Park Blvd. Suite 1 100 Itasca, Illinois 60143 USA Phone: +1-630.467.3000 Fax: +1-630.467.3010 NEC Display Solutions Europe GmbH Landshuter Allee 12-14 D-80637 Muenchen Germany Phone: +49(0)89/99699-0 Fax: +49(0)89/99699-500 V ol. 1, 1 st Ed[...]