NEC MultiSync EA232WMi manuale d’uso

MultiSync EA232WMi User ’ s Manual[...]

Index W arning, Caution ............................................................................................................... .......... English-1 Registration Information ....................................................................................................... ........ English-1 Recommended use .............................[...]

English English-1 W ARNING CAUTION CA UTI ON: TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD IS UNPLUGGED FROM W ALL SOCKET . T O FULL Y DISENGAGE THE POWER TO THE UNIT , PLEASE DISCONNECT THE POWER CORD FROM THE AC OUTLET . DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE P ARTS INSIDE. REFER SERVICING TO QUALIFIED SER VICE PERSONNEL[...]

English-2 Canadian Department of Communications Compliance Statement DOC: This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. C-UL: Bears the C-UL Mark and is in compliance with Canadian Safety Regulations according to CAN/CSA C22.2 No. 60950-1. FCC Information 1. Use the attached specif[...]

English English-3 Recommended use Safety Precautions and Maintenance FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN SETTING UP AND USING THE MUL TISYNC LCD COLOUR MONITOR: • DO NOT OPEN THE MONITOR. There are no user serviceable parts inside and opening or removing covers may expose you to dangerous shock hazards or other risks. Refer al[...]

English-4 CORRECT PLACEMENT AND ADJUSTMENT OF THE MONITOR CAN REDUCE EYE, SHOULDER AND NECK F A TIGUE. CHECK THE FOLLOWING WHEN YOU POSITION THE MONITOR: • For optimum performance, allow 20 minutes for warm-up. • Adjust the monitor height so that the top of the screen is at or slightly below eye level. Y our eyes should look slightly downward w[...]

English English-5 Contents Y our new NEC MultiSync LCD monitor box* should contain the following: • MultiSync LCD monitor with tilt/swivel/pivot/height adjust stand • Power Cord • Cable cover • Video Signal Cable (15-pin mini D-SUB male to 15-pin mini D-SUB male) • Video Signal Cable (DVI-D to DVI-D) • USB Cable • Audio Cable • Setu[...]

English-6 Quick Start T o attach the MultiSync LCD monitor to your computer system, follow these instructions: 1. T urn off the power to your computer . 2. For PC or MAC with DVI digital output: Connect the DVI signal cable to the connector of the display card in your system ( Figure A.1 ). T ighten all screws. For PC with Analog output: Connect th[...]

English English-7 Figure C.2 5. T o keep the cables neatly organized, place them into the cable management system that is built into the stand. Place the Power cord and DVI cables into the specific hooks, as indicated in Figure C.2/Figure C.3 . Place the D-Sub and the USB cables into the specific hooks, as indicated in Figure C.2/Figure C.3 . 6. Ma[...]

English-8 8. Connect the power cord to the power outlet ( Figure E.1 ). NOTE: Please refer to Caution section of this manual for proper selection of AC power cord. 9. T urn on the monitor with the front power button and the computer ( Figure E.1 ). 10. No-T ouch Auto Adjust automatically adjusts the monitor to optimal settings upon initial setup fo[...]

English English-9 Remove Monitor Stand for Mounting T o prepare the monitor for alternate mounting purposes: 1. Place hands on each side of the monitor and lift up to the highest position. Remove the cable cover ( Figure S.1 ). 2. Disconnect all cables. 3. Place monitor face down on a non-abrasive surface ( Figure S.2 ). NOTE: Handle with care when[...]

English-10 Hole of “ ” mark Please assemble then together 8. Reverse this process to re-attach stand. NOTE: Use only VESA-compatible alternative mounting method. Handle with care when removing stand. NOTE: Match “TOP SIDE” mark on stand to top side of the monitor head when re-attaching stand. Flexible Arm Installation This LCD monitor is de[...]

English English-11 Menu Detects the level of ambient lighting allowing the monitor to make adjustments to various settings resulting in a more comfortable viewing experience. Do not cover this sensor . Opens OSD main menu. Exits the OSD controls. Exits to the OSD main menu. Moves the highlighted area left/right to select control menus. Moves the ba[...]

English-12 AUT O BRIGHTNESS OFF: No function. (AUTO BRIGHTNESS) 1: Automatically adjusts the brightness to the optimal setting by detecting the brightness level of the environment* 1 . (AUTO BRIGHTNESS) 2: Automatically adjusts the brightness to the optimal brightness setting based on the white display area. The environmental brightness sensor (Amb[...]

English English-13 T ools VOLUME: Controls the volume of the speakers or headphones. T o mute the speaker output, press the “RESET/ECO MODE” button. SOUND INPUT (DisplayPort only): This function selects Audio Input or DisplayPort. VIDEO DETECT : Selects the method of video detection when more than one computer is connected. FIRST : The video in[...]

English-14 ECO Information CARBON SA VINGS: Displays the estimated carbon savings information in kg. COST : Displays the electricity cost savings in balance. CARBON CONVERT SETTING: Adjusts the carbon footprint factor in the carbon saving calculation. This initial setting is based on the OECD (2008 Edition). CURRENCY SETTING: Displays electricity p[...]

English English-15 Specifications Monitor Specifications MultiSync EA232WMi Notes LCD Module Diagonal: 58.4 cm/23.0 inches Active matrix; thin film transistor (TFT) liquid crystal Viewable Image Size: 58.4 cm/23.0 inches display (LCD); 0.265 mm dot pitch; 250 cd/m 2 white Native Resolution (Pixel Count): 1920 x 1080 luminance; 1000:1 contrast ratio[...]

English-16 Features Thin-frame design creates more desktop space for you to work and play , while the flat screen’s crisp, bright images and crystal- clear text deliver a comfortable viewing experience. No T ouch Auto Adjust automatically adjusts your optimal image settings upon initial power-on. Colour Control System: Allow you to change between[...]

English English-17 T roubleshooting No picture • The signal cable should be completely connected to the display card/computer . • The monitor does not support DisplayPort converter signal. • The display card should be completely seated in its slot. • Front Power Switch and computer power switch should be in the ON position. • Check to mak[...]

English-18 Using the Auto Brightness function The brightness of the LCD screen can be set to increase or decrease depending on the amount of ambient light within the room. If the room is bright, the monitor becomes correspondingly bright. If the room is dim, then the monitor will dim accordingly . The purpose of this function is to make the viewing[...]

English English-19 TCO Displays 5 Congratulations! This display is designed for both you and the planet! The display you have just purchased carries the TCO Certified label. This ensures that your display is designed, manufactured and tested according to some of the strictest quality and environmental requirements in the world. This makes for a hig[...]

English-20 NEC DISPLA Y SOLUTIONS is strongly committed to environmental protection and sees recycling as one of the company’ s top priorities in trying to minimize the burden placed on the environment. We are engaged in developing environmentally- friendly products, and always strive to help define and comply with the latest independent standard[...]