NEC V221W manuale d’uso

V191W V221W User ’ s Manual[...]

Index W arning, Caution ............................................................................................................... .......... English-1 Registration Information ....................................................................................................... ........ English-1 Contents ....................................[...]

English English-1 W ARNING CAUTION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD IS UNPLUGGED FROM W ALL SOCKET . TO FULL Y DISENGAGE THE POWER T O THE UNIT , PLEASE DISCONNECT THE POWER CORD FROM THE AC OUTLET . DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE P AR TS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. [...]

English-2 Canadian Department of Communications Compliance Statement DOC: This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. C-UL: Bears the C-UL Mark and is in compliance with Canadian Safety Regulations according to CAN/CSA C22.2 No. 60950-1. FCC Information 1. Use the attached specif[...]

English English-3 Contents Y our new NEC LCD monitor box* should contain the following: • LCD monitor with tilt base • Power Cord •V ideo Signal Cable • Setup Manual • CD-ROM (only EU) • Base Stand • Stand Neck Quick Start To attach the Neck/Base to the LCD monitor . 1. Insert the front of the Stand neck into the holes in the front of[...]

English-4 Figure R.1 Non-abrasive surface Figure R.2 3. Connect one end of the power cord to the monitor and the other end to the power outlet ( Figure B.1 ). NOTE: Please confirm that the tabs are completely secure. NOTE: Please refer to Caution section of this manual for proper selection of power cord. 4. T urn on the monitor with the front power[...]

English English-5 Removing the Base NOTE: Always remove the Base when shipping the LCD. 1. Place monitor face down on a non-abrasive surface ( Figure R.1 ). 2. Insert the thin rod into the hole in the back of LCD monitor and using your thumbs, press the tabs on the back side of base stand in the direction of the arrows the pull out the stand as ind[...]

English-6 Controls OSD (On-Screen Display) control buttons on the front of the monitor function as follows: 1. Basic function at pressing each key 2. OSD structure Showing OSD. Shortcut to Bright adjust window . Button At No OSD showing Shortcut to Contrast adjust window . “Auto adjust” operate. At OSD showing (Icon selection stage) Go to Adjus[...]

English English-7 BRIGHTNESS Adjusts the overall image and background screen brightness. To enter the ECO MODE, press the “AUTO” button. CONTRAST Adjusts the image brightness in relation to the background. AUTO CONTRAST Adjusts the image displayed for non-standard video inputs. AUTO ADJUST Automatically adjusts the Image Position, the H. Size a[...]

English-8 OSD LOCK OUT This control completely locks out access to all OSD control functions without Brightness and Contrast. When attempting to activate OSD controls while in the Lock Out mode, a screen will appear indicating the OSD are locked out. T o activate the OSD Lock Out function, press “AUTO”, then “+” key and hold down simultaneo[...]

English English-9 Recommended use Safety Precautions and Maintenance FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN SETTING UP AND USING THE LCD COLOUR MONIT OR: • DO NOT OPEN THE MONITOR. There are no user serviceable parts inside and opening or removing covers may expose you to dangerous shock hazards or other risks. Refer all servicin[...]

English-10 CORRECT PLACEMENT AND ADJUSTMENT OF THE MONITOR CAN REDUCE EYE, SHOULDER AND NECK F A TIGUE. CHECK THE FOLLOWING WHEN YOU POSITION THE MONITOR: • For optimum performance, allow 20 minutes for warm-up. • Adjust the monitor height so that the top of the screen is at or slightly below eye level. Y our eyes should look slightly downward [...]

English English-11 Specifications - V191W Monitor Specifications V191W Monitor Notes LCD Module Diagonal: 47.01 cm/18.5 inches Active matrix; thin film transistor (TFT) V iewable Image Size: 47.01 cm/18.5 inches liquid crystal display (LCD); Native Resolution (Pixel Count): 1366 x 768 0.30 (H) mm x 0.30 (V) mm dot pitch; 280 cd/m 2 (typ) white lumi[...]

English-12 Specifications - V221W Monitor Specifications V221W Monitor Notes LCD Module Diagonal: 54.79 cm/21.6 inches Active matrix; thin film transistor (TFT) V iewable Image Size: 54.79 cm/21.6 inches liquid crystal display (LCD); Native Resolution (Pixel Count): 1920 x 1080 0.248 (H) mm x 0.248 (V) mm dot pitch; 300 cd/m 2 (typ) white luminance[...]

English English-13 Features Reduced Footprint: Provides the ideal solution for environments requiring superior image quality but with size and weight limitations. The small footprint and low weight allow it to be moved or transported easily from one location to another . No-touch Auto Adjust: No-touch Auto Adjust automatically adjusts the monitor t[...]

English-14 T roubleshooting No picture • The signal cable should be completely connected to the display card/computer . • The display card should be completely seated in its slot. • Check front power Switch and computer power switch should be in the ON position. • Check to make sure that a supported mode has been selected on the display car[...]

English English-15 TCO’03 Congratulations! The display you have just purchased carries the TCO’03 Displays label. This means that your display is designed, manufactured and tested according to some of the strictest quality and environmental requirements in the world. This makes for a high performance product, designed with the user in focus tha[...]

English-16 NEC DISPLA Y SOLUTIONS is strongly committed to environmental protection and sees recycling as one of the company’ s top priorities in trying to minimize the burden placed on the environment. W e are engaged in developing environmentally- friendly products, and always strive to help define and comply with the latest independent standar[...]