Netgear WNAP210 manuale d’uso

350 East Plumeria Drive San Jose, CA 95134 USA December 2011 202-10474-02 1.0 ProSafe Wireless-N Access Point WNAP210 User Manual[...]

2 ProSafe Wireless-N Access Point WNAP210 © 2011 NETGEAR, Inc. All rights reserved No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means without the written permission of NETGEAR, Inc. Technical Support Thank you for choosing NETGEAR. To re[...]

3 Contents Chapter 1 Getting Started System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 What Is In the Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Hardware Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .[...]

4 ProSafe Wireless-N Access Point WNAP210 Chapter 4 Monitoring System Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 Wireless Stations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 Enable Rogue AP Detection . . . . . . . . . . . . . . . . . . . . . . . [...]

5 1 1. Getting Started The ProSafe Wireless-N Access Point WNAP210 is the basic building block of a wireless LAN infrastructure. It provides connectivity between Ethernet wired networks and radio-equipped wireless computers, wireless devices, print servers, and other devices. This chapter covers the following topics: • System Requirements • Wha[...]

Getting Started 6 ProSafe Wireless-N Access Point WNAP210 System Requirements Before installing the access point, make sure that your system has the following: • A 10/100/1000 Mbps local area network device such as a hub or switch • The Category 5 UTP straight-through Ethernet cable with RJ-45 connector included in the package, or one like it ?[...]

Getting Started 7 ProSafe Wireless-N Access Point WNAP210 Hardware Description This section describes the front and rear hardware functions of the access point. Front Panel The front hardware functions are described in the following figure and table. Power Test Ethernet WLAN LAN Figure 1. Front view The following table explains the LEDs: Table 1. F[...]

Getting Started 8 ProSafe Wireless-N Access Point WNAP210 Rear Panel Power Ethernet Restore Factory Settings Figure 2. Rear panel The access point rear panel functions are described in the following list: • Power socket. This socket connects to the 12V 1.0A power adapter. • RJ-45 Ethernet port. Use the Ethernet RJ-45 port to connect to an Ether[...]

9 2 2. Installation and Configuration This chapter describes how to set up your access point for wireless connectivity to your LAN. This basic configuration will enable computers with 802.11b/g/n wireless adapters to connect to the Internet, or access printers and files on your LAN. This chapter covers the following topics: • Wireless Equipment P[...]

Installation and Configuration 10 ProSafe Wireless-N Access Point WNAP210 Wireless Equipment Placement and Range Guidelines The operating distance or range of your wireless connection can vary significantly based on the physical placement of the access point. The latency, data throughput performance, and notebook power consumption of wireless adapt[...]

Installation and Configuration 11 ProSafe Wireless-N Access Point WNAP210 Connect to the Access Point Tip: Before mounting the access point in a high location, set up and test the access point to verify wireless network connectivity.  To connect the access point: 1. Prepare a computer with an Ethernet adapter. If this computer is already part of[...]

Installation and Configuration 12 ProSafe Wireless-N Access Point WNAP210 3. The login screen displays. Enter admin for the user name and password for the password, both in lower case letters. 4. Click Login . Your web browser should automatically find the access point and display the General screen. Configure LAN Settings When you log in, the Gene[...]

Installation and Configuration 13 ProSafe Wireless-N Access Point WNAP210 3. Select Configuration > System > Basic > Time . 4. Adjust the following fields: • Time Zone . From the drop-down list, select the local time zone for your access point from a list of all available time zones. The default is USA-Pacific. The access point will get [...]

Installation and Configuration 14 ProSafe Wireless-N Access Point WNAP210  To configure the basic IP settings of your access point: 1. Select Configuration > IP . The IP Settings screen displays: 2. If necessary, edit the IP address fields described in IP Settings Fields on page 14 . 3. Click Apply to save your basic IP settings. If you chang[...]

Installation and Configuration 15 ProSafe Wireless-N Access Point WNAP210 Set Up and Test Basic Wireless Connectivity Follow the instructions in this section to set up and test basic wireless connectivity. Once you have established basic wireless connectivity, you can enable security settings appropriate for your needs. Note: If you connect wireles[...]

Installation and Configuration 16 ProSafe Wireless-N Access Point WNAP210 5. Click Apply to save any changes. 6. Select Security . For initial configuration and testing, the Security field for Profile 1 (the default profile) is set to Open System and the SSID is set to NETGEAR_11ng (for information about hot to configure a profile, see Security Pro[...]

Installation and Configuration 17 ProSafe Wireless-N Access Point WNAP210 Channel/Frequency The wireless channel in use can be from 1 to 11 for the United States and Canada, or 1 to 13 for Europe and Australia. The default is Auto. Do not change the wireless channel unless you experience interference (shown by lost connections or slow data transfer[...]

Installation and Configuration 18 ProSafe Wireless-N Access Point WNAP210 Output Power This is the transmit power of the access point. The options are Full, Half, Quarter, Eighth, and Minimum. Decrease the transmit power if two or more access points are close together and use the same channel frequency. The default is Full. (The transmit power migh[...]

Installation and Configuration 19 ProSafe Wireless-N Access Point WNAP210  To deploy the access point: 1. Disconnect the access point from the computer you used to configure it, and put the access point where it will be deployed. The best location is elevated, such as on a wall or ceiling or on the top of a cubicle, at the center of your wireles[...]

Installation and Configuration 20 ProSafe Wireless-N Access Point WNAP210 Wireless Security Options Anyone wih a compatible wireless adapter can receive your wireless data transmissions well beyond your walls. For this reason, use the security features of your wireless equipment. The access point provides highly effective security features, which a[...]

Installation and Configuration 21 ProSafe Wireless-N Access Point WNAP210 Security Profiles Security profiles let you set up unique security settings for each SSID. You can configure up to eight unique 802.11b/g/n wireless security profiles on the access point. Select Configuration > Security > Profile Settings to display the Profile Settings[...]

Installation and Configuration 22 ProSafe Wireless-N Access Point WNAP210 Network Authentication Settings The access point is set by default as an open system with no authentication. When setting up network authentication, bear in mind the following: • If you are using access point mode, then all options are available. In other modes such as repe[...]

Installation and Configuration 23 ProSafe Wireless-N Access Point WNAP210 Data Encryption The available options depend on the network authentication setting selected (see Table 2 ); otherwise, the default is None. The Data Encryption settings are explained in the follokwing table: Table 3. Data Encryption settings Data Encryption Type Description N[...]

Installation and Configuration 24 ProSafe Wireless-N Access Point WNAP210 RADIUS Server Settings You can set up or modify the RADIUS server settings to compliment network authentication security options. The RADIUS server needs to be used with Legacy 802.1x, and can be used with WPA and WPA2 network authentication. When using a RADIUS server, speci[...]

Installation and Configuration 25 ProSafe Wireless-N Access Point WNAP210 Change or Edit a Security Profile The access point allows you to set up eight different security profiles. You can configure each profile with a different security option for network authentication.  To set up a security profile: If you are using a RADIUS server, configure[...]

Installation and Configuration 26 ProSafe Wireless-N Access Point WNAP210 7. Leave Wireless Client Security Separation set to No (it is disabled by default). If this feature is enabled, the associated wireless clients will not be able to communicate with each other. 8. If the hubs and switches on your LAN support the VLAN (802.1Q) standard and this[...]

Installation and Configuration 27 ProSafe Wireless-N Access Point WNAP210 4. Select the radio button of the security profile you want to modify, and click Edit .. 5. In the Network Authentication field, select one of the following: • WPA2 with Radius • WPA with Radius • WPA2 & WPA with Radius The encryption type displayed in the Data Encr[...]

Installation and Configuration 28 ProSafe Wireless-N Access Point WNAP210 3. In the Network Authentication field, select one of the following: • WPA2-PSK • WPA-PSK • WPA2-PSK & WPA-PSK The Data Encryption field automatically updates based on your selection: • WPA2-PSK is set to AES. • WPA-PSK is set to TKIP. • WPA2-PSK & WPA-PSK[...]

Installation and Configuration 29 ProSafe Wireless-N Access Point WNAP210 5. You manually or automatically program the four data encryption keys. These values have to be identical on all wireless clients and access points in your network. Select either: - Automatic . Enter a word or group of printable characters in the Passphrase box and click the [...]

Installation and Configuration 30 ProSafe Wireless-N Access Point WNAP210 2. Select Configuration > Security > Advanced > MAC Authetication . The MAC Authetication screen displays. 3. Select the Turn Access Control On check box to enable the access control feature. 4. Select the access control database options. The options are: • Local M[...]

31 3 3. Management This chapter covers the following topics: • Change the Password • Remote Management • Remote Console • Upgrade the Access Point Firmware • Save or Restore the Configuration File • Enable the Syslog Server • Restore Defaults[...]

Management 32 ProSafe Wireless-N Access Point WNAP210 Change the Password The default password for the user name admin is password . You should change this to a more secure password You cannot change the admin user name.  To change the administrator password: 1. Select Maintenance > Password > Change Password to display the Change Password[...]

Management 33 ProSafe Wireless-N Access Point WNAP210  To set up an SNMP management interface: 1. Select Maintenance > Remote Management > SNMP . The SNMP screen displays, as shown in the following figure: 2. Enter the following information in the SNMP fields: • SNMP . Enable SNMP to allow the SNMP network management software, such as HP[...]

Management 34 ProSafe Wireless-N Access Point WNAP210 Remote Console 1. Select Maintenance > Remote Management > Remote Console . 2. Enter the following information in the Remote Console screen. • Secure Shell (SSH) . If set to Enable, the wireless access point allows remote access only through Secure Shell and Secure Telnet. The default is[...]

Management 35 ProSafe Wireless-N Access Point WNAP210 Upgrade the Access Point Firmware The firmware is stored in flash memory, and can be upgraded as NETGEAR releases new firmware . You can download upgrade files from the NETGEAR website. If the upgrade file is compressed (.zip file), you need to first extract the image (.rmt) file before sending [...]

Management 36 ProSafe Wireless-N Access Point WNAP210 Save or Restore the Configuration File The access point settings are stored in the access point in a configuration file. This file can be saved (backed up) or restored. You can also restore the factory settings as described in Enable the Syslog Server on page 37.  To save your settings in a c[...]

Management 37 ProSafe Wireless-N Access Point WNAP210 Enable the Syslog Server The Syslog screen allows you to enable the syslog option if you have a syslog server on your LAN.  To enable a syslog server: 1. Select Configuration > System > Advanced > SysLog to display the Syslog screen. 2. Specify the following settings: • Enable Sysl[...]

Management 38 ProSafe Wireless-N Access Point WNAP210  To restore the factory settings: 1. Select Maintenance > Reset > Restore Defaults . The Restore Defaults screen displays: 2. Select the Yes radio button. 3. Click Apply . The access point password is password, the access point DHCP client is disabled, the default LAN IP address is 192.[...]

39 4 4. Monitoring This chapter covers the following topics: • System Information • Wireless Stations • Enable Rogue AP Detection • View and Save AP Lists • Activity Log • Network Traffic Statistics[...]

Monitoring 40 ProSafe Wireless-N Access Point WNAP210 System Information The System screen you access from the Monitoring tab provides a summary of the current access point configuration settings, including current IP settings and current wireless settings. This information is read-only, so any changes have to be made on other screens. To access th[...]

Monitoring 41 ProSafe Wireless-N Access Point WNAP210 Wireless Stations This screen shows all IP devices associated with this access point in the wireless network defined by the wireless network name (SSID). For each device, the screen shows the station ID, MAC address, IP address, BSSID, SSID, AID, channel rate, status (whether or not the station [...]

Monitoring 42 ProSafe Wireless-N Access Point WNAP210  To enable rogue AP detection: 1. Select Configuration > Security > Advanced > Rogue AP . The Rogue AP screen displays: 2. Click Refresh to discover the APs. See the following section for more information. 3. Click Move to add APs in the Unknown AP List to the Known AP List. 4. Click[...]

Monitoring 43 ProSafe Wireless-N Access Point WNAP210 View and Save AP Lists The access point detects nearby access points and wireless stations and maintains them in a list. You can use this list to prevent wireless stations from connecting to the access point. 1. Select Monitoring > Rogue AP . Select Unknown AP List or Known AP List as require[...]

Monitoring 44 ProSafe Wireless-N Access Point WNAP210 Activity Log The Activity Log screen displays the access point system activity. 1. Select Monitoring > Logs . The Logs screen displays: 2. Click Refresh to update the display, click Clear to clear the log content, or click Save As to save the log contents into a file on your computer or to sa[...]

Monitoring 45 ProSafe Wireless-N Access Point WNAP210 You can click Refresh to update the statistics information for each interface. The following information fields are displayed on the Statistics screen. • Packets . The number of packets sent and received since the access point was restarted. • Bytes . The number of bytes sent and received si[...]

46 5 5. Advanced Configuration This chapter describes how to configure the advanced features of your access point. This chapter includes the following sections: • 802.1Q VLAN • Hotspot Settings • Advanced Wireless Settings • Advanced QoS Settings • Wireless Bridging and Repeating[...]

Advanced Configuration 47 ProSafe Wireless-N Access Point WNAP210 802.1Q VLAN The 802.1Q VLAN protocol on the access point logically separates traffic on the same physical network. Select Configuration > System > General to display the following screen: Untagged VLANs When the Untagged VLAN check box is selected, one VLAN can be configured as[...]

Advanced Configuration 48 ProSafe Wireless-N Access Point WNAP210 Hotspot Settings If you want the access point to capture and redirect all HTTP (TCP, port 80) requests, use this feature to redirect the requests to the specified URL. For example, a hotel might want all wireless connections to go to its server to start a billing transaction. Note: T[...]

Advanced Configuration 49 ProSafe Wireless-N Access Point WNAP210  To configure advanced wireless settings: 1. Select Configuration > Wireless > Advanced > Wireless Settings . The Wireless Settings screen displays: 2. Enter the appropriate information in the following fields: 3. Click Apply to enable the wireless settings. Advanced Wire[...]

Advanced Configuration 50 ProSafe Wireless-N Access Point WNAP210 • RIFS Transmission. Reduced interframe space. RIFS transmissions are shorter than other interframe spaces, and if this feature is enabled, the access point allows transmission of successive frames at different transmit powers. The default is disabled. • DTIM Interval . The deliv[...]

Advanced Configuration 51 ProSafe Wireless-N Access Point WNAP210 The following table describes the settings for QoS queues. Table 4. QoS queues and parameters QoS queue Description Data 0 (Voice) High-priority queue, minimum delay. Time-sensitive data such as VoIP and streaming media are automatically sent to this queue. Data 1 (Video) High-priori[...]

Advanced Configuration 52 ProSafe Wireless-N Access Point WNAP210 Select the access point mode you want to use for your environment: • Wireless Point-to-Point Bridge . In this mode, the access point can communicate with another bridge-mode wireless station and with wireless clients if you select the Enable Wireless Client Association check box. T[...]

Advanced Configuration 53 ProSafe Wireless-N Access Point WNAP210 Point-to-Point Bridge LAN Segment 2 LAN Segment 1 Hub or switch AP 2 APs in point-to-point bridge mode AP 1 Router Figure 3. Point-to-point bridge mode  To configure a point-to-point bridge: 1. Select Configuration > Wireless Bridge > Bridging and Repeating . The Bridging an[...]

Advanced Configuration 54 ProSafe Wireless-N Access Point WNAP210 5. Configure the other access point (AP 2) on LAN Segment 2 in point-to-point bridge mode. AP 1 needs to have AP 2’s MAC address in its Remote MAC Address field, and AP 2 needs to have AP 1’s MAC address in its Remote MAC Address field. 6. Configure and verify the following param[...]

Advanced Configuration 55 ProSafe Wireless-N Access Point WNAP210  To configure a point-to-multi-point wireless bridge: 1. For the first access point (AP 1) on LAN Segment 1, select Configuration > Wireless Bridge > Bridging and Repeating . The Bridging and Repeating screen displays. 2. Select the Enable Wireless Bridging and Repeating che[...]

Advanced Configuration 56 ProSafe Wireless-N Access Point WNAP210 Wireless Repeater LAN Segment 2 LAN Segment 1 AP 2 All APs in repeater mode AP 1 Router AP 3 Router Figure 5. Wireless repeater  To configure the access point as a wireless repeater: 1. For the first access point (AP 1) on LAN Segment 1, select Configuration > Wireless Bridge &[...]

Advanced Configuration 57 ProSafe Wireless-N Access Point WNAP210 A computer on any LAN segment should be able to connect to the Internet or share files and printers with computers or servers connected to any of the three WLAN segments. 8. Click Apply to save your settings. You can extend repeating by adding up to two additional access points confi[...]

58 6 6. Troubleshooting and Debugging This chapter includes the following sections: • Troubleshooting with the LEDs • Cannot Connect to the Access Point to Configure It • Wireless Access to the Network • Time-Out Error for URL or IP Address Note: For up-to-date WNAP210 installation details and troubleshooting guidance, visit http://support.[...]

Troubleshooting and Debugging 59 ProSafe Wireless-N Access Point WNAP210 Troubleshooting with the LEDs All LEDs Are Off It takes a few seconds for the Power LED to light. Wait a minute and check the Power LED on the access point. If the access point has no power: • Make sure that the power cord is connected to the access point. • Make sure that[...]

Troubleshooting and Debugging 60 ProSafe Wireless-N Access Point WNAP210 Cannot Connect to the Access Point to Configure It Check these items: • The access point is installed correctly, LAN connections are OK, and it is powered on. Check that the LAN port LED is green to verify that the Ethernet connection is OK. • The default configuration of [...]

Troubleshooting and Debugging 61 ProSafe Wireless-N Access Point WNAP210 • If the access point is configured correctly, check your Internet connection (DSL or cable modem, and so on.) to make sure that it is working correctly. • Try again.[...]

62 A A. Supplemental Information This chapter includes the following topics: • Factory Default Settings • Technical Specifications[...]

Supplemental Information 63 ProSafe Wireless-N Access Point WNAP210 Factory Default Settings You can use the Restore Factory Settings button on the rear panel to reset all settings to their factory defaults. This is called a hard reset. Pressing this button for a shorter period of time simply causes your device to reboot. Restore Factory Settings ?[...]

Supplemental Information 64 ProSafe Wireless-N Access Point WNAP210 Spanning Tree Protocol Disabled Secure Telnet Enabled Wireless operating mode Access Point Access point name netgearxxxxxx, where xxxxxx represents the last 6 digits of the wireless access point MAC address. Wireless communication Enabled 11 b/g/n wireless network name (SSID) NETGE[...]

Supplemental Information 65 ProSafe Wireless-N Access Point WNAP210 Technical Specifications Table 6. Technical specifications Feature Description 802.11g data rates 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, & 54 Mbps (Auto-rate capable) 802.11ng data rates, channel width 20 MHz and Guard Interval short (400 ms) Best, 7.2 Mbps, 14.4 Mbps, 21.7 M[...]

66 B B. Command Line Reference The ProSafe Wireless-N Access Point WNAP210 (AP) can be configured through either the command-line interface (CLI), a web browser, or a MIB browser. The CLI allows viewing and modification of the configuration from a terminal or computer through a Telnet connection. Command Sets keyword Description -------------------[...]

Command Line Reference 67 ProSafe Wireless-N Access Point WNAP210 | | | | |-macacl-add --add wireless access control (ACL) | | | | |-macacl-database --delete wireless access control (ACL) database | | | | |-macacl-del --delete wireless access control (ACL) | | | | |-mcsrate --transmit data rate | | | | |-mode --enable wireless access control (ACL) [...]

Command Line Reference 68 ProSafe Wireless-N Access Point WNAP210 | | | | | | |-key3 --wireless wep key 3 | | | | | | |-key4 --wireless wep key 4 | | | | | | |-keyno --key number | | | | | | |-name --profile name | | | | | | |-presharedkey --pre-shared key | | | | | | |-security-separation --disable associated wireless client communication | | | | [...]

Command Line Reference 69 ProSafe Wireless-N Access Point WNAP210 | | | | | | |-presharedkey --pre-shared key | | | | | | |-security-separation --disable associated wireless client communication | | | | | | |-ssid --network name (1-32 chars) | | | | | | |-status --profile status | | | | | | |-vlan-id --VLAN id | | | | | | |-wep-pass-phrase --wirele[...]

Command Line Reference 70 ProSafe Wireless-N Access Point WNAP210 | | | | | | |-status --profile status | | | | | | |-vlan-id --VLAN id | | | | | | |-wep-pass-phrase --wireless wep passphrase key | | | | | | |-wepkeytype --wireless wep key type | | | | | | | | | | | |-7> --7th security profile | | | | | | |-authentication --authentication type |[...]

Command Line Reference 71 ProSafe Wireless-N Access Point WNAP210 | | | | | | | | | | | | | | | |-wireless-bridge> --wireless bridge setting | | | | | |-security-profile> --create security profile | | | | | | |-1> --1st security profile | | | | | | | |-authentication --authentication type | | | | | | | |-encryption --data encryption | | | [...]

Command Line Reference 72 ProSafe Wireless-N Access Point WNAP210 | | | | | | | |-remote-mac --remote MAC | | | | | | | |-status --profile status | | | | | | | |-wep-pass-phrase --wireless wep passphrase key | | | | | | | |-wepkey --wireless wep key | | | | | | | |-wepkeytype --wireless wep key type | | | | | | | | | | | | | | | | | | | | | | |-wmm[...]

Command Line Reference 73 ProSafe Wireless-N Access Point WNAP210 | | |-authentication-server-primary --primary authentication server | | |-authentication-server-primary-port --primary system accounting server shared secret | | |-authentication-server-primary-sharedsecret --primary authentication server shared secret | | |-authentication-server-sec[...]

Command Line Reference 74 ProSafe Wireless-N Access Point WNAP210 |-restore-default-password --restore default system password |-show> --show system settings | |-configuration --show system configuration | |-interface> --show wireless lan interface | | |-eth> --ethernet interface | | | |-statistics --show ethernet statistics | | | | | |-wl[...]

75 C C. Notification of Compliance NETGEAR Wireless Routers, Gateways, APs Regulatory Compliance Information Note: This section includes user requirements for operating this product in accordance with National laws for usage of radio spectrum and operation of radio devices. Failure of the end-user to comply with the applicable requirements may resu[...]

ProSafe Wireless-N Access Point WNAP210 Notification of Compliance 76 Español [Spanish] Por medio de la presente NETGEAR Inc. declara que el Radiolan cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE. Ελληνική [Greek] ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ NETGEAR Inc. ΔΗΛΩΝΕ[...]

ProSafe Wireless-N Access Point WNAP210 Notification of Compliance 77 This device is a 2.4 GHz wideband transmission system (transceiver), intended for use in all EU member states and EFTA countries, except in France and Italy where restrictive use applies. In Italy the end-user should apply for a license at the national spectrum authorities in ord[...]

ProSafe Wireless-N Access Point WNAP210 Notification of Compliance 78 • For product available in the USA market, only channel 1~11 can be operated. Selection of other channels is not possible. • This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter. Canadian Department of Communi[...]

ProSafe Wireless-N Access Point WNAP210 Notification of Compliance 79 Interference Reduction Table The following table shows the recommended minimum distance between NETGEAR equipment and household appliances to reduce interference (in feet and meters). Household Appliance Recommended Minimum Distance (in feet and meters) Microwave ovens 30 feet / [...]

80 Index Numerics 192.168.0.210, static IP address 11 255.255.255.0 default subnet 11 A access control 30 access point default name 18 access point mode 40 access point, deployment of 19 access points, placement of multiple 10 activity logs 44 aggregation length 49 AMPDU 49 AP EDCA parameters 50 AP lists 43 authentication 22 B beacon interval 49 C [...]

81 ProSafe Wireless-N Access Point WNAP210 LEDs 7 LEDs, troubleshooting with 59 logs, activity 44 logs, syslog 37 M MAC address 11 , 12 , 40 restricting access 20 , 29 MAC authentication 30 MCS Index 17 N NetBIOS name 12 , 40 NetBIOS name, logging in 11 network authentication 22 network traffic statistics 44 NTP, enabling 13 O output power 18 P pac[...]

82 ProSafe Wireless-N Access Point WNAP210 wireless network name 16 wireless radio, turning off and on 16 wireless range 10 wireless repeater, configuring 56 wireless security options 20 wireless settings, advanced 49 wireless stations 41 wireless stations, trusted 30 WPA with RADIUS 27[...]