NewAir AC-12100E manuale d’uso

AC-12100E PORT ABLE AIR CONDITIONER ’ OW NER S MANU AL[...]

1 CONTENT S The rating data indicated on the energy label is based on the testing condition of installing the un-extended air exhaust duct without adaptor A & B (The duct and the adaptor A & B are listed in the accessories chart of the Instruction Manual). NOT E Welcome Introduction...........................................................[...]

2 INTRODUCTION DISPOSAL: Do not dispose of this product as unsorted municipal waste. Collection of such waste separately for special treatment is necessary. It is prohibited to dispose of this appliance in domestic household waste. For disposal, the following options may be available: A) The municipality has established collection systems, where el[...]

3 To prevent injury to the user or other people and property damage, the following instructions must be followed. Incorrect operation due to ignoring of instructions may cause harm or damage. Your air conditioner should be used in such a way that it is protected from moisture. e.g. condensation, splashed water, etc. Do not place or store your air c[...]

4 Be sure the electrical service is adequate for the model you have chosen. This information can be found on the serial plate, which is located on the side of the cabinet and behind the grille. Be sure the air conditioner is properly grounded. To minimize shock and fire hazards, proper grounding is important. The power cord is equipped with a three[...]

5 IDENTIFICATION OF P ART S NAMES OF P ARTS Fig.2 Front Operation Panel Horizontal Louver Blade (Swing automatically) Caster Carrying Handle (Both sides) 1 2 3 4 1 2 3 4 1 2 3 4 5 Model A Model B Operation Panel Horizontal Louver Blade (Manual) Remote signal receptor Caster Carrying Handle (Both) 1 2 3 4 5 Fig. 1 Fig.3 Rear 9 6 7 8 1 0 11 6 7 8 9 1[...]

6 AIR CONDITIONER FEATURE S Before you begin , thoroughly familiarize yoursel f with the contro l panel and remot e controller and all it s functions, then follo w the symbol fo r the functions yo u desire. The unit ca n be controlled b y the unit contro l panel alone o r with the remot e controller . ELECTRONIC CONTRO L OPERATING INST R UCTION S F[...]

7 OPERATING INSTRUCTION S 8 Operating Instr uctions - Press the "MODE" button until the "COOL" indicator light comes on. - Press the A DJUST buttons " " or " " to select your desired room temperature. The temperature can be set within a range of 62°F-88°F /17°C-30°C. - Press the "F AN SPEED" but[...]

8 OPERATING INSTRUCTION S Other features In case of a power outage o r interruption, the unit will automatically re-start, in the settings last used, after the power is restored . Power Outage After the unit has stopped, operation cannot be restarted for the first 3 minutes after power has been restored. This is to protectthe unit. Operation will a[...]

9 INSTALL A TION INSTRUCTIONS (optiona l ) INSTALLA TION INSTRUCTIONS Locatio n Window Slider Kit Installa tion Fig.7 B A or bol t Window slider ki t bol t Window slider ki t or Vertical win d o w Window Slid er Kit Minimum : 1.84ft (56.2cm). Maximum:3.22ft (98.2cm). Minimum : 1.84ft (56.2cm). Maximum:3.22ft (98.2cm). Minimum : 1.84ft (56.2cm). Max[...]

1 0 INSTALL A TION INSTRUCTIONS (optional ) Installation in a double-hung sash window 1. Cut the foam seal (adhesive type) to the proper length and attach it to the window stool. Fig.10 2. Attach the window slider kit to the window stool. Adjust the length of the window slider kit according to the width of window; shorten the adjustable window kit [...]

22.1 ~ 38.6 11 INSTALL A TION INSTRUCTIONS (optional ) Installation in a sliding sash window 1. Cut the foam seal (adhesive type) to the proper length and attach it to the window frame,Fig.14. 2. Attach the window slider kit to the window stool. Adjust the length of the window slider kit according to the width of window; shorten the adjustable wind[...]

1 2 INSTALL A TION INSTRUCTIONS (optional ) Exhaust hose installation: The exhaust hose and adaptor must be installed or removed in accordance with the usage mode. The duct ca n be compressed or extended moderately according to th e installation requirements, bu t it is desirable to kee p the duct lengt h to a minimum . 1. Install the window exhaus[...]

1 3 INSTALL A TION INSTRUCTION S Water drainage: - During dehumidifying modes, remove the drain plug from the back of the unit; install the drain connector (5/8 universal fem ale mender) with 3 4 hose (not included). For the models without drain connector , just attach the drain hose to the hole. Place the open end of the hose directly over the dra[...]

1 4 CARE AND MAINTENANC E CARE AND MAINTENANCE 1) Be sure to unplug the unit before cleaning or servicing. 2) Do not use gasoline, thinner or other chemicals to clean the unit. 3) Do not wash the unit directly under a tap or using a hose. It may cause electrical danger . 4) If the power cord is damaged, it should be repaired by manufacturer or its [...]

TROUBLESHOOTING TIP S TROUBLE SHOOTI NG 1. Unit does not start when pressing on/off button TROUBLES POSSIBLE CAUSES SUGGEST REMEDIES Reset the temperature. Make sure all the windows and doors are closed. Remove the heat sources if possible. Connect the duct and make sure it can function properly . Decrease the set temperature. Clean the air filter [...]

LIMITED MANUF ACTURER’S W ARRANTY This appliance is covered by a limited manufacturer ’s warranty . For one year from the original date of purchase, the manufacturer will repair or repl ace any part s of this appliance that prove to be defective in materials and workmanship, provided the appliance has been used under normal operating conditions[...]