Newcon Optik LRB 6000CI manuale d’uso

Operation Manual LRB 6000CI LASER RANGE FINDER BINOCULARS 105 Sparks Ave., Toronto, ON M2H 2S5, Canada[...]

ii[...]

iii IMPORTANT INFORMATION Read prior to activation You have just purchased a sophisticated elect ro-optical device that emi ts invisible laser radi ation. To operate it properly, please read this manual carefully.  NEVER direct laser beam at the eyes of people or animals  NEVER aim the unit at the Sun or bright sources of light  NEVER subj[...]

iv  Caution - use of optical instruments such as binoculars, loupes, mi rrors, lenses, etc. with thi s product increases eye hazard  Note : Avoid eye exposure to direct l aser beam or its close reflection  Prevent bright light from focusing through t he eyepieces  Never aim the unit at highly reflective objects like mirrors and retroref[...]

TABLE OF CONTENTS 1. BRIEF DES CRIPTION.................................................. 2 2. DEVICE APPEA RANCE .............................................. 4 3. DELIVERY SET ............................................................ 7 4. SPECIFI CATIONS ........................................................ 8 5. OPERATION IN STRUCTI ONS...[...]

2 CAREFULLY READ ALL THE INSTRUCTIONS PRIOR TO USE! FAILURE TO OBEY THE INSTRUCTIONS WILL VOID THE WARRANTY AND MAY CAUSE INJURY! 1. BRIEF DESCRIPTION LRB 6000CI Laser Rangefinder Binoculars (System) is an advanced laser range finder system that enables instant distance, speed, vertical and horizont al angular measurem ents. An outstanding opti cs [...]

3 Key Features of the LRB 6000CI Laser Rangefinder Binoculars  Modern digital circuitry all ows targeting through most types of glass  First, last or the most reflective target acquisition  Meters/Yards/Mils/Degr ees/KMH/MPH display  Last 10 measurements recall  Selectable reticle shape (+ or  )  Gating capability  Speed det[...]

4 2. DEVICE APPEARANCE 1 – Eyepieces 2 – Objective / receiving lens 3 – Objective / emitting lens 4 – Dioptric adjustm ent rings 5 – Mode button 6 – Action button 7 – Body of the device 8 – Rubber grip 2 3 4 5 6 7 1 8 Fig. 1. Front view[...]

5 1 – Eyepiece 9 – Interpupillary distan ce adjustment lever 10 – Model Identificat ion label 11 – Identificatio n and certification labe l (at the bottom): 10 9 1 11 Fig. 2 Rear view[...]

6 Fig. 3 Display 1 – Low battery indicat or 2 – Reticle (either -¦- or  ) 3 – Units of measurem ent 4 – Measurement resul t 5 – Gating indicator 6 – Laser active indicator 7 – Ready mode i ndicator 8 – Setup mode indi cator 4 6 2 1 3 7 8[...]

7 3. DELIVERY SET Standard delivery set for LRB 6000CI includes: Qty LRB 6000CI Carrying case Neck strap User’s manual Warranty card Cleaning cloth Computer cable CD with comm unication soft ware Hard case 9V non-magnetic Lithium battery 1 pc. 1 pc. 1 pc. 1 pc. 1 pc. 1 pc. 1 pc. 1 pc. 1 pc. 1 pc. Optional items GPS cable Exact delivery set depend[...]

8 4. SPECIFICATIONS Optics Magnificati on 7x Objective lens diameter 50 mm Exit pupil diam eter 7.1 mm Field of view 5  Type of coating Fully multi-coated optics Interpupillary distance 58-72 mm Dioptre adjustm ent range ±4 Range Finder Laser Class 1, eye safe, 905 nm Measuring range 1 – 6,500 m Accuracy and display resolution  1 m First, [...]

9 Compass Measured azimuth range 6400 mils /360  Accuracy ±1  Inclinometer Measured elevation range ±60  Accuracy ±1  Height measuring Yes (Meters or Yards) Power Battery 9V Lithium (non-magneti c) Battery capacit y Min 5,000 measurem ents (Scanning regime) 'Low Batte ry' indicator Yes Environmental Operational tem perature[...]

10 5. OPERATION INSTRUCTIONS Installing the battery  Open the battery compartment using a suitable tool, or a coin. Insert a 9V Lithium non-magneti c battery provi ded with your device  Connect the battery to th e battery snap  Refit the battery compartment and tighten the screw. If the battery com partment cover does not close tightly and[...]

11 Using the Device The LRB 6000CI operational procedures are desi gn to allow the user to use most applicab le options in the fastest time possibl e. To activate it, press and hol d Action button (6, Fig.1) for one second. At start the unit comes into Ready to Measure mode indicated by the word ‘READY’ on the display visible through the eyepie[...]

12 Factors affecting measuring distance Though maxim um m easurement di stance depends on target reflectivit y, weather conditions and ot her conditions, for most targets the unit will provide accurate ranging for up to 4,000 mete rs. Under good conditions a large size target can be m easured up to 6,500 met ers. Target reflectivity depends on its [...]

13 Target selection logic On its way towards the target the laser beam may be reflected from various object s, thus decreasing ranging accuracy. The smaller, the farther, and the less reflective is the target – the high er is the possibility of o btaining an incorrect measurement. To improve accuracy the un it has a built-in target selection logi[...]

14 Scanning regime the unit repeatedly m easures and displays result s every second while A butt on is pressed. To activate Scanning regim e press and hold Action butt on in Ready mode. The unit will work in Scanning regime while Action butt on is pressed. Scanning or Individual Measurement regimes are available for any selected m ode of m easureme[...]

15  Std – allows the user to select single action measurements: o Distance only ( d) o Compass Only ( C) o Elevation Only ( E) o Speed Only (S) o Height Only (H) o Speed + Distance ( Sd) o Distance +Compass + Elevation ( dCE)  Unit – allows the user to select unit s of desired measurements, o Distance from M to Y o Compass & Elevation[...]

16 o AUtO – Last Target Measurement* o PLGr – Comm unication to PLGR GPS* o PC – Comm unication to PC * o Reticule – Change reticule from + (cross) to  (rectangle) o CAL – Compass calibration ▪ CALc – compass calibration (CI model only ) ▪ Corr – accuracy correction of active parameters *not shown in the menu i f currently sele[...]

17 Active mode of measurement ( Std ) Correction parameter Condition S, Sd, d Distance Install unit at 1 meter 1 from flat target 2 C, E Azimuth and elevation Put unit in a level p lane and aim it to the North direction 3 dCE Distance, azimuth and elevation Install unit at 1 meter 1 from flat target 2 controlling its level p osition and directi on [...]

18 Compass calibration If the System was exposed t o a strong magnetic field or was not in use for a long time, the compass accuracy m ay dimini sh. To return the compass into workin g condition:  Select CALc from CAL m enu  Keeping the unit horiz ontally, perform one full rotation around vertical axis within half a m inute and then one full [...]

19 Gating mode In this mode gati ng function is activat ed: here user can set the minimal distance to the ta rget, any object closer than the gating distance will be ignored. To select Gating Mode:  Select GAtE fro m mai n me nu Minimal gating distance of 0 m eters (display: 000 m) will be initially set, further pressin g M button will increase [...]

20 Data Recall mode In Data Recall mode results of the last 10 m easurement s can be displayed. Measurement result s are saved in on-board mem ory in sets depending on the param eters set for m easuring, for instance, if only distance is measured - the set will co nsist of one number, if distance and azi muth are m easured – the set will consist [...]

21 Computer interconnectivity The unit supports RS-232 interface. Physical connection is performed through connect or with threaded coupling mechanism , designed for the heavy-duty outdoor applications. Note: Do not apply excessive force when disconnecti ng cable. Damage t o cable or connector resulting from improper treat ment is not covered by wa[...]

22 GPS interconnectivity LRB 6000CI can transm it the acquired data to a GPS receiver using DB15 conn ector and PLGR/DAGR protocol. An optional cabl e is required. To work with GPS, perfo rm the following steps:  Switch the rangefinder to PLGr m ode;  Choose dFLt measuring mode;  Connect the rangefinder and GPS unit wi th the cable. For ea[...]

23 6. BEST MEASURING TECHNIQUE Laser range finder measures distance by catching laser beam reflected from the targ et. Everything that i mproves reflection increases the measurement reliability and max imum r an g e. 1. Use tripod when ranging rem ote targets. The longer is the distance, the greater is the beam shift due to hand tremor. 2. Aim at a[...]

24 reflections from all objects closer than the gating distance will be ignored. This is especially effective when ranging in unfavourable atm ospheric conditions, that is, in the rain, fog, haze or in the bright sun. Gating provides bett er results than the “last” target selection, but it requ ires preliminary rough distance estim ation to cut[...]

25 7. STORAGE AND MAINTENANCE The unit is a sophisticat ed precision optical instrum ent equipped with laser and electroni cs. Therefore, it should be handled with due care.  Keep away from direct sunlight.  Avoid impact s, jolts, dust, m oisture, and sharp changes of temperature.  Do not use the device at temperatures higher than 50 o C ([...]

26 8. TROUBLESHOOTING Ranging does not work. The display is t ransparent. Check the charge of the batte ry. Replace it if it is weak. Ranging does not work . The display indicates results of the last measurement. Wait for 8 seconds until the di splay becomes transparent, and press the Action button again. Black dots are visible on LCD. Liquid Cryst[...]

27 9. WARRANTY NEWCON warrants this product against defect s in materi al and workmanshi p for one year from the dat e of the original purchase. Longer warranty is avai lable, subject to the terms of t he specific sales contract. Should your Newcon product prove to be defective during t his period, please deliver the product securely packaged in it[...]

28 10. CUSTOMER SUPPORT Should you experience any difficulties with your NEWCON OPTIK product, consult the enclosed m anual. If the problem rem ains unresolved, contact our cust omer support department at (416) 663-6963 or toll free at 1- 877-368-6666. Our operating hours are 9am-5pm , Monday - Friday, Eastern Standard Ti me. At no ti me should equ[...]

29 11. QUALITY CERTIFICATE Serial number _____________________________ The unit indicated above has passed the quality inspection. Production date Quality Inspector Purchase date[...]

[...]

[...]

NEWCON OPTIK  Printed in Canada R1 – 2.11[...]