Nissan Maxima (2016) manuale d’uso

® 2016 M AXI M A OWN E R’S MAN UAL For y our s afety , read car efully and keep in this v ehicle.[...]

W elcome to the growing family of new NISSAN owners. This vehicle is delivered to you with confidence. It was produced using the latest techniques and strict quality control. This manual was prepared to help you under- stand the operation and maintenance of your vehicle so that you may enjoy many miles (kilome- ters) of driving pleasure. Please rea[...]

MODIFICA TION OF Y OUR VEHICLE This vehicle should not be modified. Modification could affect its performance, safety or durability and may even violate governmental regulations. In addition, damage or performance prob- lems resulting from modifications may not be covered under NISSAN warranties. This manual includes information for all features an[...]

If you see this symbol, it means “Do not do this” or “Do not let this happen.” If you see a symbol similar to these in an illustra- tion, it means the arrow points to the front of the vehicle. Arrows in an illustration that are similar to these indicate movement or action. Arrows in an illustration that are similar to these call attention t[...]

NISSAN CARE S... Both NISSAN and your NISSAN dealer are dedicated to serving all your automotive needs. Y our satisfaction with your vehicle and your NISSAN dealer are our primary concerns. Y our NISSAN dealer is always available to assist you with all your automobile sales and service needs. However, if there is something that your NISSAN dealer c[...]

T able of Contents Illustrated table of contents Safety—Seats, seat belts and supplemental restraint system Instruments and controls Pre-driving checks and adjustments Monitor, climate, audio, phone and voice recognition systems Starting and driving In case of emergency Appearance and care Maintenance and do-it-yourself T echnical and consumer in[...]

[...]

0 Illustrated table of contents Air bags, seat belts and child restraints ..............0 - 2 Exterior front ......................................0 - 3 Exterior rear .......................................0 - 4 Passenger compartment ...........................0 - 5 Instrument Panel ..................................0 - 6 Engine compartment check l[...]

1. T op tether strap anchor (P . 1-21) 2. Rear head restraints/headrests (P . 1-6) 3. Rear seat belts (P . 1-11) 4. Roof-mounted curtain side-impact and rollover supplemental air bag (P . 1-40) 5. Front seat-mounted side-impact supplemental air bags (P . 1-40) 6. Front head restraints/headrests (P . 1-6) 7. Front seat belt with pretensioner and sho[...]

1. Engine hood (P . 3-20) 2. Wiper and washer switch (P . 2-36) 3. Windshield (P . 8-20) 4. P ower windows (P . 2-51) 5. Door locks, NISSAN Intelligent Key®, keys (P . 3-3, 3-6, 3-2) 6. Mirrors, side view camera (if so equipped) (P . 3-28, 4-9) 7. Tire pressure (P . 8-31) 8. Flat tire (P . 6-3) 9. Tire chains (P . 8-31) 10. Headlight and turn sign[...]

1. Rear window defroster switch (P . 2-38) 2. High-mounted stop light (P . 8-27) 3. Interior trunk lid release (P . 3-21) 4. T runk lid (P . 3-21) 5. Exterior trunk lid release/request button (P . 3-6) 6. Replacing bulbs (P . 8-27) 7. Fuel-filler door, fuel recommendation (P . 3-23, 9-2) 8. Child safety rear door locks (P . 3-3) Refer to the page n[...]

1. Interior trunk access (P . 1-2) 2. P ower moonroof (if so equipped) (P . 2-55) 3. Sun visors (P . 3-27) 4. Map lights (P . 2-58) 5. Rearview mirror (P . 3-28) 6. HomeLink® Universal T ransceiver (P . 2-60) 7. Glove box (P . 2-47) 8. Cup holders (P . 2-47) 9. Console box (P . 2-47) 10. Front seats (P . 1-2) 11. Rear seats (P . 1-2) Refer to the [...]

1. V ent (P . 4-24) 2. Headlight/fog light/turn signal switch (P . 2-38) 3. Supplemental front-impact air bag/horn (P . 1-40, 2-42) 4. Meters, gauges, warning lights, indicator lights and vehicle information display (P . 2-3, P . 2-7, P . 2-15) 5. Wiper and washer switch (P . 2-36) 6. V ent (P . 4-24) 7. Hazard warning flasher switch (P . 6-2) 8. N[...]

19. Cruise control main/Intelligent Cruise Control (ICC) (if so equipped) set switches (P . 5-40, 5-42) 20. Hood release (P . 3-20) 21. Fuse box (P . 8-22) 22. Heated steering wheel switch (if so equipped) (P . 2-45) V ehicle Dynamic Control (VDC) OFF switch (P . 2-45) T runk release switch (P . 3-21) Rear power sunshade switch (if so equipped) (P [...]

VQ35DE engine 1. Engine coolant reservoir (P . 8-8) 2. Drive belt location (P . 8-18) 3. Engine oil filler cap (P . 8-10) 4. Brake fluid reservoir (P . 8-14) 5. Air cleaner (P . 8-20) 6. Fuse block (P . 8-22) 7. Fuse block/Fusible links (P . 8-22) 8. Fusible links (P . 8-22) 9. Battery (P . 8-16) 10. Engine oil dipstick (P .8-10) 11. Radiator cap ([...]

W arning light Name Page Anti-lock Braking System (ABS) warn- ing light 2-7 or Brake warning light 2-8 Charge warning light 2-8 Engine oil pressure warning light 2-8 Forward emergency braking system warning light (if so equipped) 2-9 Low tire pressure warning light 2-9 W arning light Name Page Master warning light 2-10 P ower steering warning light[...]

MEMO 0-10 Illustrated table of contents[...]

1 Safety—Seats, seat belts and supplemental restraint system Seats ............................................1 - 2 Front power seat adjustment .....................1 - 3 Folding rear seat ...............................1 - 5 Center armrest .................................1 - 6 Head restraints/headrests ..........................1 - 6 Adjustabl[...]

WARNING ● Do not ride in a moving vehicle when the seatback is reclined. This can be dangerous. The shoulder belt will not be against your body. In an accident, you could be thrown into it and receive neck or other serious injuries. Y ou could also slide under the lap belt and receive serious internal injuries. ● For the most effective protecti[...]

FRONT POWER SEA T ADJUSTMENT Operating tips ● The power seat motor has an auto-reset overload protection circuit. If the motor stops during operation, wait 30 seconds then reactivate the switch. ● Do not operate the power seat switch for a long period of time when the engine is off. This will discharge the battery . For additional information, [...]

Seat lifter (driver’s seat) Push the front or rear end of the switch up or down to adjust the angle and height of the seat cushion. Lumbar support (if so equipped for driver’s seat) The lumbar support feature provides adjustable lower back support to the driver. Push the front or back end of the switch to adjust the seat lumbar area. Thigh exte[...]

FOLDING REAR SEA T Interior trunk access The trunk can be accessed from the passenger side of the rear seat for loading and unloading, as shown. 1. Move the front passenger seat to the most forward position. 2. Open the access cover on the rear parcel shelf. 3. Push down on the button 䊊 1 on the rear parcel shelf. 4. Fold down the passenger’s s[...]

T o fold down the driver side of the rear seat, open the trunk and pull on the strap 䊊 1 . The rear seats can be locked using the mechani- cal key to prevent unauthorized access. For ad- ditional information on keys, refer to “K eys” in the “Pre-driving checks and adjustments” section of this manual. CENTER ARMREST Pull the armrest down u[...]

The illustration shows the seating positions equipped with head restraints/headrests. 䉱 Indicates the seating position is equipped with a head restraint. 䡲 Indicates the seating position is equipped with a headrest. + Indicates the seating position is not equipped with a head restraint or headrest (if applicable) . ● Y our vehicle is equipped[...]

NON-ADJUST ABLE HEAD RESTRAINT/HEADREST COMPONENTS 1. Removable head restraint/headrest 2. Single notch 3. Lock knob 4. Stalks REMOVE Use the following procedure to remove the head restraint/headrest: 1. Pull the head restraint/headrest up to the highest position. 2. Push and hold the lock knob. 3. Remove the head restraint/headrest from the seat. [...]

INST ALL 1. Align the head restraint/headrest stalks with the holes in the seat. Make sure that the head restraint/headrest is facing the correct direction. The stalk with the notch (notches) 䊊 1 must be installed in the hole with the lock knob 䊊 2 . 2. Push and hold the lock knob and push the head restraint/headrest down. 3. Properly adjust th[...]

Raise T o raise the head restraint/headrest, pull it up. Make sure the head restraint/headrest is posi- tioned so the lock knob is engaged in the notch before riding in that designated seating position. Lower T o lower, push and hold the lock knob and push the head restraint/headrest down. Make sure the head restraint/headrest is posi- tioned so th[...]

PRECAUTIONS ON SEA T BEL T USAGE If you are wearing your seat belt properly ad- justed and you are sitting upright and well back in your seat with both feet on the floor, your chances of being injured or killed in a collision and/or the severity of injury may be greatly reduced. NISSAN strongly encourages you and all of your passengers to buckle up[...]

WARNING ● Every person who drives or rides in this vehicle should use a seat belt at all times. Children should be in the rear seats and in an appropriate restraint. WARNING ● The seat belt should be properly ad- justed to a snug fit. Failure to do so may reduce the effectiveness of the entire restraint system and increase the chance or severit[...]

WARNING ● Always route the shoulder belt over your shoulder and across your chest. Never put the belt behind your back, under your arm or across your neck. The belt should be away from your face and neck, but not falling off your shoulder. ● Position the lap belt as low and snug as possible AROUND THE HIPS, NOT THE WAIST . A lap belt worn too h[...]

SEA T BEL T WARNING LIGHT Both the driver’s and passenger’s front seats are equipped with a seat belt warning light. The warning light, located on the instrument panel, will show the status of the driver and passenger seat belt. NO TE: The front passenger seat belt warning light will not light up if the seat is not occupied. For additional info[...]

Fastening the seat belts 1. Adjust the seat. For additional information, refer to “Seats” in this section. 2. Slowly pull the seat belt out of the retractor and insert the tongue into the buckle 䊊 A until you hear and feel the latch engage. ● The retractor is designed to lock dur- ing a sudden stop or on impact. A slow pulling motion permit[...]

3. Position the lap belt portion low and snug on the hips 䊊 B as shown. 4. Pull the shoulder belt portion toward the retractor to take up extra slack 䊊 C . Be sure the shoulder belt is routed over your shoul- der and across your chest. The front passenger seat and the rear seating positions three-point seat belts have two modes of operation: ?[...]

T o increase your confidence in the seat belts, check the operation as follows: ● Grasp the shoulder belt and pull forward quickly . The retractor should lock and re- strict further belt movement. If the retractor does not lock during this check or if you have any questions about seat belt opera- tion, see a NISSAN dealer. Shoulder belt height ad[...]

WARNING ● Only NISSAN seat belt extenders, made by the same company which made the original equipment seat belts, should be used with NISSAN seat belts. ● Adults and children who can use the standard seat belt should not use an extender. Such unnecessary use could result in serious personal injury in the event of an accident. ● Never use seat[...]

There are three basic types of child restraint systems: ● Rear-facing child restraints ● Forward-facing child restraints ● Booster seats The proper restraint depends on the child’s size. Generally , infants up to about 1 year and less than 20 lbs (9 kg) should be placed in rear-facing child restraints. Forward-facing child restraints are av[...]

Once a child outgrows the height or weight limit of the harness-equipped forward-facing child re- straint, NISSAN recommends that the child be placed in a commercially available booster seat to obtain proper seat belt fit. For a seat belt to fit properly , the booster seat should raise the child so that the shoulder belt is properly positioned acro[...]

WARNING Never let a child stand or kneel on any seat and do not allow a child in the cargo area. The child could be seriously injured or killed in a sudden stop or collision. PRECAUTIONS ON CHILD RESTRAINTS WARNING ● Failure to follow the warnings and in- structions for proper use and installa- tion of child restraints could result in serious inj[...]

– NISSAN recommends that all child restraints be installed in the rear seat. Studies show that children are safer when properly restrained in the rear seat than in the front seat. If you must install a forward-facing child restraint in the front seat, refer to “Forward-facing child restraint in- stallation using the seat belts” in this sectio[...]

● If the child restraint is compatible with your vehicle, place your child in the child restraint and check the various adjustments to be sure the child restraint is compatible with your child. Choose a child restraint that is designed for your child’s height and weight. Always follow all recommended procedures. ● If the combined weight of th[...]

– Inspect the lower anchors by insert- ing your fingers into the lower anchor area. Feel to make sure there are no obstructions over the anchors such as seat belt webbing or seat cushion material. The child restraint will not be secured properly if the lower an- chors are obstructed. – Child restraint anchorages are de- signed to withstand only[...]

When installing a child restraint, carefully read and follow the instructions in this manual and those supplied with the child restraint. T op tether anchor point locations WARNING Child restraint anchorages are designed to withstand only those loads imposed by correctly fitted child restraints. Under no circumstances are they to be used to at- tac[...]

Follow these steps to install a rear-facing child restraint using the LA T CH system: 1. Position the child restraint on the seat. Al- ways follow the child restraint manufactur- er’s instructions. 2. Secure the child restraint anchor attach- ments to the LA T CH lower anchors. Check to make sure the LA T CH attachment is prop- erly attached to t[...]

3. For child restraints that are equipped with webbing-mounted attachments, remove any additional slack from the anchor attach- ments. Press downward and rearward firmly in the center of the child restraint with your hand to compress the vehicle seat cushion and seatback while tightening the webbing of the anchor attachments. 4. After attaching the[...]

Do not use the lower anchors if the combined weight of the child and the child restraint exceeds 65 lbs (29.5 kg) . If the combined weight of the child and the child restraint is greater than 65 lbs, (29.5 kg) use the vehicle’s seat belt (not the lower anchors) to install the child restraint. Be sure to follow the child restraint manufacturer’s[...]

3. Pull the shoulder belt until the belt is fully extended. At this time, the seat belt retractor is in the ALR mode (child restraint mode) . It reverts to the ELR mode when the seat belt is fully retracted. 4. Allow the seat belt to retract. Pull up on the shoulder belt to remove any slack in the belt. 5. Remove any additional slack from the seat [...]

6. After attaching the child restraint, test it be- fore you place the child in it. Push it from side to side while holding the child restraint near the seat belt path. The child restraint should not move more than 1 inch (25 mm) , from side to side. T ry to tug it forward and check to see if the belt holds the restraint in place. If the restraint [...]

3. The back of the child restraint should be secured against the vehicle seatback. If necessary , adjust or remove the head restraint/headrest to obtain the correct child restraint fit. If the head restraint/headrest is removed, store it in a secure place. Be sure to reinstall the head restraint/headrest when the child restraint is removed. For add[...]

6. After attaching the child restraint, test it be- fore you place the child in it. Push it from side to side while holding the child restraint near the LA T CH attachment path. The child re- straint should not move more than 1 inch (25 mm) , from side to side. T ry to tug it forward and check to see if the LA T CH at- tachment holds the restraint [...]

Rear bench seat 1. Remove the head restraint/headrest and store it in a secure place. Be sure to reinstall the head restraint/headrest when the child restraint is removed. For additional informa- tion about head restraint/headrest adjust- ment, removal and installation, refer to “Head restraints/headrests” in this section. 2. Position the top t[...]

Follow these steps to install a forward-facing child restraint using the vehicle seat belt in the rear seats or in the front passenger seat: 1. If you must install a child restraint in the front seat, it should be placed in a forward-facing direction only. Move the seat to the rearmost position. Child restraints for infants must be used in the rear[...]

4. Pull the shoulder belt until the belt is fully extended. At this time, the seat belt retractor is in the ALR mode (child restraint mode) . It reverts to ELR mode when the seat belt is fully retracted. 5. Allow the seat belt to retract. Pull up on the shoulder belt to remove any slack in the belt. 6. Remove any additional slack from the seat belt[...]

8. After attaching the child restraint, test it be- fore you place the child in it. Push it from side to side while holding the child restraint near the seat belt path. The child restraint should not move more than 1 inch (25 mm) , from side to side. T ry to tug it forward and check to see if the belt holds the restraint in place. If the restraint [...]

䊊 1 T op tether strap 䊊 2 Anchor point Installing top tether strap The child restraint top tether strap must be used when installing the child restraint with seat belts. First, secure the child restraint with the seat belt. Rear bench seat 1. Remove the head restraint/headrest and store it in a secure place. Be sure to reinstall the head restra[...]

A . Low back booster seat B. High back booster seat Booster seats of various sizes are offered by several manufacturers. When selecting any booster seat, keep the following points in mind: ● Choose only a booster seat with a label certifying that it complies with Federal Motor V ehicle Safety Standard 213 or Canadian Motor V ehicle Safety Standar[...]

All U.S. states and Canadian provinces or territories require that infants and small children be restrained in an approved child restraint at all times while the vehicle is being operated. The instructions in this section apply to booster seat installation in the rear seats or the front passenger seat. Booster seat installation CAUTION T o avoid in[...]

If the seating position does not have an adjustable head restraint/headrest and it is interfering with the proper booster seat fit, try another seating position or a different booster seat. 4. Position the lap portion of the seat belt low and snug on the child’s hips. Be sure to follow the booster seat manufacturer’s in- structions for adjustin[...]

Roof-mounted curtain side-impact and rollover supplemental air bag system This system can help cushion the impact force to the head of occupants in front and rear outboard seating positions in certain side-impact or roll- over collisions. In a side impact, the curtain air bags are designed to inflate on the side where the vehicle is impacted. In a [...]

● The driver and front passenger seat belt buckles are equipped with sensors that detect if the seat belts are fastened. The NISSAN Advanced Air Bag System monitors the severity of a collision and seat belt usage then inflates the air bags as needed. Failure to properly wear seat belts can increase the risk or severity of injury in an accident. ?[...]

WARNING ● Never let children ride unrestrained or extend their hands or face out of the window. Do not attempt to hold them in your lap or arms. Some examples of dangerous riding positions are shown in the illustrations WARNING ● Children may be severely injured or killed when the front air bags, side air bags or curtain air bags inflate if the[...]

WARNING ● Even with the NISSAN Advanced Air Bag System, never install a rear-facing child restraint in the front seat. An in- flating front air bag could seriously in- jure or kill your child. For additional information, refer to “Child restraints” in this section. ARS1044 ARS1045 WRS0256 1-44 Safety—Seats, seat belts and supplemental restr[...]

WARNING Front seat-mounted side-impact supple- mental air bags and roof-mounted curtain side-impact and rollover supplemental air bags: ● The side air bags and curtain air bags ordinarily will not inflate in the event of a frontal impact, rear impact, or lower severity side collision. Always wear your seat belts to help reduce the risk or severit[...]

WARNING ● When sitting in the rear seat, do not hold onto the seatback of the front seat. If the side air bag inflates, you may be seriously injured. Be especially careful with children, who should always be properly restrained. Some examples of dangerous riding positions are shown in the illustrations. ● Do not use seat covers on the front sea[...]

NISSAN Advanced Air Bag System (front seats) 1. Roof-mounted curtain side-impact and roll- over supplemental air bag inflators 2. Roof-mounted curtain side-impact and roll- over supplemental air bags 3. Front seat-mounted side-impact supple- mental air bag modules 4. Air bag Control Unit (ACU) 5. Supplemental front-impact air bag modules 6. Crash z[...]

● Do not position the front passenger seat so it contacts the rear bench seats. If the front seat does contact the rear bench seats, the air bag system may determine a sensor malfunction has oc- curred and the front passenger air bag status light may illuminate and the supplemental air bag warning light may flash. ● If a forward-facing child re[...]

cause irritation and choking. Those with a history of a breathing condition should get fresh air promptly . Front air bags, along with the use of seat belts, help to cushion the impact force on the face and chest of the front occupants. They can help save lives and reduce serious injuries. However, an inflating front air bag may cause facial abrasi[...]

In addition to the above, certain objects placed on the front passenger seat may also cause the light to operate as described above depending on their weight. For additional information related to the normal operation and troubleshooting of this occupant classification sensor system, please refer to “Normal operation” and “T roubleshooting”[...]

used. If the air bag status light is not illuminated (indicating that the air bag might inflate in a crash) , it could be that the child restraint or seat belt is not being used properly . Make sure that the child restraint is installed properly , the seat belt is used properly and the occupant is posi- tioned properly. If the air bag status light [...]

NO TE: This vehicle’s occupant classification sen- sor system locks the classification during driving so it is important that you confirm that the front passenger is properly classi- fied prior to driving. Also, the occupant classification sensor system may recalcu- late the weight of the occupant when the vehicle comes to a stop (i.e. stop light[...]

NO TE: A system check will be performed during which the front passenger air bag status light will remain lit for about 7 seconds initially. If the light is still ON after this, the person should be advised not to ride in the front passenger seat and the vehicle should be checked by a NISSAN dealer as soon as possible. 3. If the light is OFF with a[...]

● T ampering with the front air bag system may result in serious personal injury. T ampering includes changes to the steering wheel and the instrument panel assembly by placing material over the steering wheel pad and above the instrument panel or by installing additional trim material around the air bag system. ● Removing or modifying the fron[...]

the side where the vehicle is impacted. They may not inflate in certain side collisions. Curtain air bags are also designed to inflate in certain types of rollover collisions or near roll- overs. As a result, certain vehicle movements (for example, during severe off-roading) may cause the curtain air bags to inflate. V ehicle damage (or lack of it)[...]

● T ampering with the side air bag system may result in serious personal injury. For example, do not change the front seats by placing material near the seat- backs or by installing additional trim material, such as seat covers, around the side air bag. ● Work around and on the side air bag and curtain air bag systems should be done by a NISSAN[...]

The supplemental air bag warning light is used to indicate malfunctions in the pretensioner system. For additional information, refer to ⬙ Supplemental air bag warning light ⬙ in this sec- tion. If the operation of the supplemental air bag warning light indicates there is a malfunction, have the system checked by a NISSAN dealer. When selling y[...]

If any of the following conditions occur, the front air bag, side air bag, curtain air bag and preten- sioner systems need servicing: ● The supplemental air bag warning light re- mains on after approximately 7 seconds. ● The supplemental air bag warning light flashes intermittently . ● The supplemental air bag warning light does not come on a[...]

MEMO Safety—Seats, seat belts and supplemental restraint system 1-59[...]

2 Instruments and controls Instrument Panel ..................................2 - 2 Meters and gauges ................................2 - 3 Speedometer and odometer .....................2 - 4 T achometer ....................................2 - 5 Engine coolant temperature gauge ...............2 - 5 Fuel gauge ....................................2 -[...]

Extended storage switch .......................... 2-46 Storage ......................................... 2-47 Map pockets .................................. 2-47 Seatback pockets ............................. 2-47 Sunglasses holder ............................. 2-48 Cup holders .................................. 2-49 Storage trays ................[...]

1. V ent (P . 4-24) 2. Headlight/fog light/turn signal switch (P . 2-38) 3. Supplemental front-impact air bag/horn (P . 1-40, 2-42) 4. Meters, gauges, warning lights, indicator lights and vehicle information display (P . 2-3, P . 2-7, P . 2-15) 5. Wiper and washer switch (P . 2-36) 6. V ent (P . 4-24) 7. Hazard warning flasher switch (P . 6-2) 8. N[...]

19. Cruise control main/Intelligent Cruise Control (ICC) (if so equipped) set switches (P . 5-40, 5-42) 20. Hood release (P . 3-20) 21. Fuse box (P . 8-22) 22. Heated steering wheel switch (if so equipped) (P . 2-45) V ehicle Dynamic Control (VDC) OFF switch (P . 2-45) T runk release switch (P . 3-21) Rear power sunshade switch (if so equipped) (P [...]

SPEEDOMETER AND ODOMETER This vehicle is equipped with a speedometer and odometer. The speedometer is located on the right side of the meter cluster. The odometer is located within the vehicle information display . Speedometer The speedometer indicates vehicle speed. Odometer/T win trip odometer The odometer and the twin trip odometer 䊊 1 are dis[...]

T ACHOMETER The tachometer indicates engine speed in revo- lutions per minute (rpm) . Do not rev engine into the red zone 䊊 1 . CAUTION When engine speed approaches the red zone, reduce engine speed. Operating the engine in the red zone may cause serious engine damage. ENGINE COOLANT TEMPERA TURE GAUGE The gauge indicates the engine coolant tempe[...]

FUEL GAUGE The gauge indicates the approximate fuel level in the tank. The gauge may move slightly during braking, turning, acceleration, or going up or down hills. The gauge needle returns to 0 (Empty) after the ignition switch is placed in the OFF position. The low fuel warning light is located in the lower right corner of the vehicle information[...]

Anti-lock Braking System (ABS) warning light Power steering warning light Security indicator light or Brake warning light Seat belt warning light and chime Side light and headlight indicator light (green) Charge warning light Supplemental air bag warning light Slip indicator light Engine oil pressure warning light Front fog light indicator light T [...]

If the ABS warning light illuminates while the engine is running or while driving, it may indicate the ABS is not functioning properly . Have the system checked by a NISSAN dealer. If an ABS malfunction occurs, the anti-lock func- tion is turned off. The brake system then operates normally but without anti-lock assistance. For additional informatio[...]

CAUTION Running the engine with the engine oil pressure warning light on could cause se- rious damage to the engine almost imme- diately. Such damage is not covered by warranty. T urn off the engine as soon as it is safe to do so. Forward Emergency Braking (FEB) system warning light (if so equipped) This light illuminates when the Forward Emer- gen[...]

WARNING ● Radio waves could adversely affect electric medical equipment. Those who use a pacemaker should contact the electric medical equipment manufac- turer for the possible influences before use. ● If the light does not illuminate with the ignition switch placed in the ON posi- tion, have the vehicle checked by a NISSAN dealer as soon as po[...]

● Parking Brake ON (RED) ● Low W asher Fluid ● I-K ey System Fault ● Low Tire Pressure ● CVT W arning ● Sonar Parking Sensor Error ● LED Headlight Failure (RED if no other red warnings are active) ● Chassis Control warning ● Driver Attention Alert System Fault ● Emergency Assist Pedal System Fault For additional information, ref[...]

Unless checked and repaired, the supplemental restraint system (air bag system) and/or the seat belts with pretensioner system may not function properly . For additional information, refer to “Supplemental restraint system (SRS)” in the “Safety—Seats, seat belts and supplemental re- straint system” section of this manual. WARNING If the s[...]

Operation The MIL will come on in one of two ways: ● MIL on steady — An emission control system malfunction has been detected. Check the fuel-filler cap if the L OOSE FUEL CAP warning appears in the vehicle information display . If the fuel-filler cap is loose or miss- ing, tighten or install the cap and continue to drive the vehicle. The light[...]

V ehicle Dynamic Control (VDC) OFF indicator light This indicator light comes on when the VDC off switch is pushed to OFF . This indicates the VDC system is not operating. Push the VDC off switch again or restart the engine and the system will operate normally. For additional information, refer to “Vehicle Dynamic Control (VDC) system” in the ?[...]

The vehicle information display is located to the left of the speedometer. It displays such items as: ● Home ● Audio Information ● Navigation Information ● Drive Computer Information ● Fuel Economy Information ● Driving Aids Information (if so equipped) ● Tire Pressure Information ● Sport Information (Oil pressure, Gear Oil T empera[...]

䊊 3 — Scroll up or down the vehicle infor- mation menu items. If the vehicle information display is not showing a menu with the buttons, pressing or will change to the previous/next au- dio preset. 䊊 4 — go back or forward through the vehicle information menu items or to change from one display screen to the next. The OK, and buttons also c[...]

SETTINGS The setting mode allows you to change the infor- mation displayed in the vehicle information dis- play as well as the model for several vehicle functions: ● Driver Assistance ● Customize Display ● V ehicle Settings ● Maintenance ● Clock ● TPMS Settings ● Unit/Language ● K ey-Linked Settings ● Factory Reset Driver Assistan[...]

● View History - Select to display the vehicle’s recorded fuel economy information history. T o reset the information, press the OK but- ton and confirm the reset by pressing the OK button again when prompted. Navigation Settings This setting allows the customer to configure the navigation options in the vehicle information dis- play as well as[...]

● Selective Unlock — When this item is turned on and when the door handle request switch on the driver’s or front passenger’s side door is pushed, only the corresponding door is unlocked first. The remaining doors will be unlocked if the door unlock operation is per- formed again within 1 minute. When this item is turned off, all the doors [...]

Other Other maintenance items can include such things as air filter or tire rotation. The distance for checking or replacing the items can be set or reset. Clock For additional information, refer to the separate Navigation Owner’s Manual. TPMS Settings The unit for tire pressure that displays in the vehicle information display can be changed to: [...]

K ey-Linked Settings The Key-Linked Setting can be turned ON/OFF using the OK button. It will display the key syn- chronized and in use for this vehicle. The linked items include: ● Enabled Main Content Screens ● Car Icon Color ● W elcome Effects ● Units ● Language (Meter only) ● Navigation Style (Arrow/City) ● I-K ey Link System On/O[...]

LIC3244 2-22 Instruments and controls[...]

VEHICLE INFORMA TION DISPLA Y W ARNINGS AND INDICA T ORS 1. Engine start operation 2. No Key Detected 3. Shift to Park 4. Key Battery Low 5. Engine start operation for Intelligent Key sys- tem (if I-K ey battery level is low) 6. Key ID Incorrect 7. Parking Sensor Error: See Owner’s Manual 8. Release Parking Brake 9. Low Fuel 10. Low W asher Fluid[...]

is not in P (Park) position. Also, a chime sounds when the ignition switch is in the ACC or OFF position. If this warning illuminates, move the shift lever to the P (Park) position and start the engine. Key Battery Low This indicator illuminates when the Intelligent Key battery is running out of power. If this indicator illuminates, replace the bat[...]

Headlight System Error: See Owner’s Manual This warning illuminates when there is an error with the system. For additional information, refer to “Headlight and turn signal switch” in this sec- tion. Tire Pressure Low - Add Air This warning appears when the low tire pressure warning light in the meter illuminates and low tire pressure is detec[...]

Reminder: T urn OFF headlights This warning appears when the headlights are left in the ON position when exiting the vehicle. Place the headlight switch in the OFF or AUT O position. For additional information, refer to “Headlight and turn signal switch” in this section. Chassis Control System Error: See Own- er’s Manual (if so equipped) This[...]

BSW/RCT A System Malfunction: See Owner’s Manual (if so equipped) This warning appears when the Blind Spot W arning/Rear Cross T raffic Alert systems are not functioning properly . For additional information, refer to “Blind Spot Warning system” and “Rear Cross T raffic Alert (RCT A) system” in the “Start- ing and driving” section of [...]

RECEIVING A CALL Using Bluetooth® Hands-Free Phone System, a received phone call can be operated on the ve- hicle information display as well as on the touch- screen display . 1. When there is an incoming call, the caller information and the operation keys are dis- played on the vehicle information display . 2. Use or to highlight the pre- ferred [...]

TEXT MESSAGING Using Bluetooth® Hands-Free Phone System, a received text message can be operated on the vehicle information display as well as on the touch-screen display . T o read/ignore an incoming text 1. When a new text message is received, a pop-up window and operation keys will ap- pear with the sender’s name or phone num- ber on the vehi[...]

T o reply to/exit from a text 1. When a new text message is received and [Read] is selected, operation keys are dis- played on the vehicle information display . 2. Use or to highlight the pre- ferred item and push the OK button to select the item. Available keys Action [Reply] Available pre-determined messages will be displayed on the vehicle infor[...]

NA VIGA TION S Y STEM T urn-by-turn route guidance can be displayed on the vehicle information display . T o view turn-by-turn route guidance on the ve- hicle information display, use or and scroll to on the vehicle information display menu. City view City view shows representation of intersections with road curvature and surroundings. Lane guidanc[...]

Compass view Compass view is displayed when no route is set, and shows current weather conditions and speed limit information (if available) . Far screen view Far screen view shows destination information, weather and speed limit information (if available for the street) . Navigation settings The navigation related display settings can be changed. [...]

Available items Action [Alerts] When this item is turned on, the view of the turning point with an alarm sound will interrupt the displays other than navigation screen when the vehicle approaches the guide point. [Arrow view] When this mode is selected, the Arrow view will be dis- played on the vehicle information display. [City view] When this mod[...]

The icon will not move across the screen if the vehicle is moving over speeds of 7 kph (4 mph) , yet the information will still transfer to the vehicle information display . The turn-by-turn route guidance cannot be trans- ferred to the vehicle information display if the navigation screen is already shown or if a warning is present. For additional [...]

4. Confirm that the security indicator light stays on for about 30 seconds. The vehicle security system is now pre-armed. The vehicle security system will automati- cally shift into the armed phase. The security light begins to flash once every three seconds. If during the pre-armed phase one of the following occurs, the sys- tem will not arm: ● [...]

Security indicator light The security indicator light blinks whenever the ignition switch is placed in the OFF , LOCK or ACC position. This function indicates the NISSAN V e- hicle Immobilizer System is operational. If the NISSAN Vehicle Immobilizer System is mal- functioning, the light will remain on while the ignition switch is placed in the ON p[...]

CAUTION ● Do not operate the washer continuously for more than 30 seconds. ● Do not operate the washer if the windshield-washer fluid reservoir is empty. ● Do not fill the windshield-washer fluid reservoir with windshield-washer fluid concentrates at full strength. Some methyl alcohol based windshield- washer fluid concentrates may perma- nen[...]

● When the windshield glass is coated with water repellent, the speed of the rain-sensing auto wipers may be higher even though the amount of the rainfall is small. ● Be sure to turn off the rain-sensing auto wiper system when you use a car wash. ● The rain-sensing auto wipers may not operate if rain does not hit the rain sensor even if it is[...]

CAUTION Use the headlights with the engine run- ning to avoid discharging the vehicle battery. Autolight system The autolight system allows the headlights to be set so they turn on and off automatically. The autolight system can: ● T urn on the headlights, front parking, tail, license plate and instrument panel lights au- tomatically when it is d[...]

Be sure you do not put anything on top of the autolight sensor located in the top side of the instrument panel. The autolight sen- sor controls the autolight; if it is covered, the autolight sensor reacts as if it is dark out and the headlights will illuminate. If this occurs while parked with the engine off and the key in the ON position, your veh[...]

WARNING When the daytime running light system is active, tail lights on your vehicle are not on. It is necessary at dusk to turn on your headlights. Failure to do so could cause an accident injuring yourself and others. INSTRUMENT BRIGHTNESS CONTROL Press the “+” button to increase the brightness of instrument panel lights. Press the “-” bu[...]

Lane change signal 䊊 2 Move the lever up or down until the turn signal begins to flash, but the lever does not latch, to signal a lane change. Hold the lever until the lane change is completed. Move the lever up or down until the turn signal begins to flash, but the lever does not latch, and release the lever. The turn signal will automatically f[...]

The front seats are warmed by built-in heaters. 1. Start the engine. 2. Push the L O or HI position of the switch, as desired. The indicator light in the switch will illuminate. The heater is controlled by a thermostat, automatically turning the heater on and off. The indicator light will remain on as long as the switch is on. 3. When the seat is w[...]

The climate controlled seat warms up or cools down the front seat by blowing warm or cool air from under the surface of the seat. The climate control switch is located on the center console. The climate controlled seat can be operated as follows: 1. Start the engine. 2. T urn the control knob 䊊 A to the heat side 䊊 1 or the cool side 䊊 2 . Th[...]

The heated steering wheel system is designed to operate only when the surface temperature of the steering wheel is below 68°F (20°C) . Push the heated steering wheel switch to warm the steering wheel after the engine starts. The indicator light will come on. If the surface temperature of the steering wheel is below 68°F (20°C) , the system will[...]

The power outlets are for powering electrical accessories such as cellular telephones. They are rated at 12 volt, 120W (10A) maximum. The power outlets are powered only when the ignition switch is in the ACC or ON position. CAUTION ● The outlet and plug may be hot during or immediately after use. ● Only certain power outlets are designed for us[...]

MAP POCKETS SEA TBACK POCKETS The seatback pockets are located on the back of the driver’s and passenger’s seats. The pockets can be used to store maps. WARNING T o ensure proper operation of the passen- ger’s NISSAN Advanced Air Bag System, please observe the following items: ● Do not allow a passenger in the rear seat to push or pull on t[...]

● Do not place heavy loads heavier than 2.2 lbs. (1 kg) on the seatback, head restraint/headrest or in the seatback pocket. SUNGLASSES HOLDER T o open the sunglasses holder, push and release. Only store one pair of sunglasses in the holder. WARNING Keep the sunglasses holder closed while driving to avoid obstructing the driver’s view and to hel[...]

CUP HOLDERS CAUTION ● Avoid abrupt starting and braking when the cup holder is being used to prevent spilling the drink. If the liquid is hot, it can scald you or your passenger. Spilled liquid can also damage the seat climate system. ● Use only soft cups in the cup holder. Hard objects can injure you in an accident. CAUTION ● Do not use bott[...]

ST ORAGE TRA Y S WARNING Do not place sharp objects in the trays to help prevent injury in an accident or sud- den stop. GL OVE BO X Open the glove box by pulling the handle. Use the master key when locking or unlocking the glove box. There is a trunk cancel switch in the glove box. For additional information, refer to “Cancel switch” in the ?[...]

CONSOLE BO X T o open the console box, press in on the lever 䊊 1 and raise the lid 䊊 2 . T o close, push the lid down until the lock latches. POWER WINDOWS WARNING ● Make sure that all passengers have their hands, etc . inside the vehicle while it is in motion and before closing the windows. Use the window lock switch to prevent unexpected us[...]

Driver’s side power window switch 1. Window lock button 2. Power door lock switch 3. Front passenger side automatic switch 4. Right rear passenger side 5. Left rear passenger side 6. Driver side automatic switch The driver’s side control panel is equipped with switches to open or close all of the windows. T o open a window, push the switch and [...]

Rear power window switch The rear power window switches open or close only the corresponding windows. T o open the window , push the switch to the first detent and continue to hold it down until the desired window position is reached 䊊 1 . T o close the window, pull the switch to the first detent and continue to hold up until the desired window p[...]

If the windows do not close automatically If the power window automatic function (closing only) does not operate properly, perform the fol- lowing procedure to initialize the power window system. 1. Place the ignition switch in the ON position. 2. Close the door. 3. Open the window more than halfway by operating the power window switch. 4. Pull the[...]

Auto-reverse function (when closing or tilting down the moonroof) The auto-reverse function can be activated when the moonroof is closed or tilted down by auto- matic operation when the ignition switch is placed in the ON position or for a period of time after the ignition switch is placed in the OFF position. Depending on the environment or drivin[...]

Sliding the moonroof T o slide the moonroof: ● T o fully open the moonroof, push the switch 䊊 1 toward the open position until it reaches the second detent. If the switch 䊊 1 is pushed to the first detent, only the sunshade will open. ● T o fully close the moonroof, push the switch 䊊 2 toward the close position until it reaches the second[...]

Sunshade T o open the sunshade: ● T o fully open the sunshade, push the switch 䊊 1 toward the open position until it reaches the first detent. ● T o fully open the sunshade and the moon- roof together, push the switch 䊊 1 toward the open position until it reaches the second detent. T o close the sunshade: ● T o fully close the sunshade, p[...]

CAUTION ● Do not place objects (such as newspa- pers, handkerchiefs, etc .) on the screen inlet port. Doing so may entangle these objects in the screen when it is extend- ing or retracting, causing improper op- eration or damage to the screen. ● Do not push the sun shade arm with your hands, etc ., as this may deform it. Improper operation or d[...]

The lights will go off when the ignition switch is placed in the ON position, or the driver’s door is closed and locked. The lights will also go off after a period of time when the doors are open. NO TE: The step lights illuminate when the driver and passenger doors are opened regard- less of the interior light switch position. These lights will [...]

MAP LIGHTS T o turn the map lights on, push the switches. T o turn them off, push the switches again. CAUTION Do not use for extended periods of time with the engine stopped. This could result in a discharged battery. The light illuminates when the trunk lid is opened. When the trunk lid is closed, the light goes off. For additional information, re[...]

WARNING ● Do not use the HomeLink® Universal T ransceiver with any garage door opener that lacks safety stop and re- verse features as required by federal safety standards. (These standards be- came effective for opener models manufactured after April 1, 1982) . A ga- rage door opener which cannot detect an object in the path of a closing garage[...]

2. Using both hands, simultaneously press and hold the desired HomeLink® button and handheld transmitter button. DO NO T re- lease until the HomeLink® indicator light 䊊 1 flashes slowly and then rapidly . When the indicator light 䊊 1 flashes rapidly , both but- tons may be released. (The rapid flashing indicates successful programming.) NO TE[...]

PROGRAMMING HOMELINK® FOR CANADIAN CUST OMERS AND GA TE OPENERS Canadian radio-frequency laws require transmit- ter signals to “time-out” (or quit) after several seconds of transmission – which may not be long enough for HomeLink® to pick up the signal during training. Similar to this Canadian law , some U.S. gate operators are designed to [...]

CLEARING THE PROGRAMMED INFORMA TION The following procedure clears the programmed information from both buttons. Individual buttons cannot be cleared. However, individual buttons can be reprogrammed. For additional informa- tion, refer to “Reprogramming a single HomeLink® button” in this section. T o clear all programming: 1. Press and hold t[...]

3 Pre-driving checks and adjustments K e y s .............................................3 - 2 NISSAN Intelligent K ey® . .......................3 - 2 Doors ............................................3 - 3 Locking with key ................................3 - 4 Locking with inside lock knob ....................3 - 5 Locking with power door lock s[...]

1. Intelligent Keys (two sets) 2. Mechanical keys 3. K ey number plate (one plate) NISSAN INTELLIGENT KEY® Y our vehicle can only be driven with the Intelligent K eys which are registered to your vehicle’s Intel- ligent K ey System components. Never leave these keys in the vehicle. As many as four Intelligent K eys can be regis- tered and used w[...]

Mechanical key The Intelligent Key contains the mechanical key , which can be used in case of a discharged bat- tery . T o remove the mechanical key , release the lock knob on the back of the Intelligent K ey. T o install the mechanical key, firmly insert it into the Intelligent K ey until the lock knob returns to the lock position. The mechanical [...]

L OCKING WITH KEY T o lock or unlock the vehicle, turn the key as shown. Manual (for driver’s door only) T o lock a door, turn the key toward the front of the vehicle 䊊 1 . T o unlock, turn the key toward the rear of the vehicle 䊊 2 . P ower The power door lock system allows you to lock or unlock all doors at the same time. T urning the key t[...]

L OCKING WITH INSIDE L OCK KNOB T o lock the door without the key, move the inside lock knob to the lock position 䊊 1 , then close the door. T o unlock the door without the key, move the inside lock knob to the unlock position 䊊 2 . L OCKING WITH POWER DOOR L OCK SWIT CH T o lock all the doors without a key , push the door lock switch (driver?[...]

CHILD SAFETY REAR DOOR L OCK Child safety locks help prevent the rear doors from being opened accidentally, especially when small children are in the vehicle. The child safety lock levers are located on the edge of the rear doors. When the lever is in the unlock position 䊊 2 , the door can be opened from the outside or the inside. When the lever [...]

In such cases, correct the operating conditions before using the Intelligent K ey function or use the mechanical key . Although the life of the battery varies depending on the operating conditions, the battery’s life is approximately two years. If the battery is dis- charged, replace it with a new one. When the Intelligent Key battery is low, a y[...]

DOOR L OCKS/UNL OCKS PRECAUTION ● Do not push the door handle request switch with the Intelligent Key held in your hand as illustrated. The close distance to the door handle will cause the Intelligent Key system to have difficulty recognizing that the Intelli- gent K ey is outside the vehicle. ● After locking with the door handle request switch[...]

Locking doors 1. Move the shift lever to the P (Park) position, place the ignition switch in the L OCK posi- tion and make sure you carry the Intelligent K ey with you. 2. Close all doors. 3. Push any door handle request switch while carrying the Intelligent K ey with you. 4. All doors will lock. 5. The hazard warning lights flash twice, the outsid[...]

Lockout protection T o prevent the Intelligent Key from being acci- dentally locked in the vehicle, lockout protection is equipped with the Intelligent K ey system. When any door is open, the doors are locked, and then the Intelligent K ey is put inside the vehicle and all the doors are closed; a chime will sound and the lock will automatically unl[...]

If a door handle is pulled while unlocking the doors, that door may not be unlocked. Returning the door handle to its original position will unlock the door. If the door does not unlock after return- ing the door handle, push the door handle re- quest switch to unlock the door. All doors will be locked automatically unless one of the following oper[...]

CAUTION When locking the doors using the Intelli- gent Key, be sure not to leave the key in the vehicle. Locking doors 1. Place the ignition switch in the L OCK posi- tion. 2. Close all doors. 3. Press the button on the Intelligent Ke y. 4. The hazard warning lights flash twice, the horn beeps once, and the front and tail lights will turn on for 10[...]

Unlocking doors 1. Press the button on the Intelligent Ke y. 2. The driver’s door will unlock and the hazard warning lights flash once, and the front and tail lights will turn on for 30 seconds. 3. Press the button again within one minute, the outside buzzer sounds once and the remaining doors unlock. NO TE: If Selective Unlock is turned off in t[...]

Releasing the trunk lid Press the button for longer than 1 second to open the trunk lid. The trunk release button will not operate when the ignition switch is in the ON position or when the trunk cancel switch is in the OFF position. For additional information, refer to “Cancel switch” in this section. Using the panic alarm If you are near your[...]

Answer back horn feature If desired, the answer back horn feature can be deactivated using the Intelligent K ey . When it is deactivated and the L OCK button is pushed, the hazard indicator lights flash twice. When the UNL OCK button is pushed, nei- ther the hazard indicator lights nor the horn op- erates. NO TE: If you change the answer back horn [...]

TROUBLESHOO TING GUIDE V erify the location of all Intelligent K eys that are programmed for the vehicle. If another Intelligent K ey is in range or inside the vehicle, the vehicle system may respond differently than expected. Symptom Possible Cause Remedy When pushing the ignition switch to stop the engine The red “Shift to Park” warning appea[...]

Symptom Possible Cause Remedy When pushing the ignition switch to start the engine The Intelligent Key battery indicator appears on the display. The battery charge is low. Replace the battery with a new one. For additional information, refer to “Battery re- placement” in the “Maintenance and do-it- yourself” section of this manual. The yell[...]

The button will be on the NISSAN Intelli- gent Key® if the vehicle has remote engine start. This feature allows the engine to start from out- side the vehicle. The following features may be affected when the remote start feature is used: ● V ehicles with an automatic climate control system will default to either a heating or cooling mode dependi[...]

The following events will occur when the engine starts: ● The parking lights will turn on and remain on as long as the engine is running. ● The doors will be locked and the climate control system may come on. ● The engine will continue to run for 10 min- utes. Repeat the steps to extend the time for an additional ten minutes. For additional i[...]

● The remote start button is not pressed and held within 5 seconds of pressing the lock button. ● The brake is pressed. ● The doors are not closed and locked. ● The trunk or back door is open. ● The I–K ey Indicator Light remains solid in the vehicle information display . ● The alarm sounds due to illegal entry into the vehicle. ● T[...]

WARNING ● Do not drive with the trunk lid open. This could allow dangerous exhaust gases to be drawn into the vehicle. For addi- tional information, refer to “Exhaust gas (carbon monoxide)” in the “Starting and driving” section of this manual. ● Closely supervise children when they are around cars to prevent them from playing and becomi[...]

INTERIOR TRUNK LID RELEASE WARNING Closely supervise children when they are around cars to prevent them from playing and becoming locked in the trunk where they could be seriously injured. Keep the car locked, with the rear seatback and trunk lid securely latched when not in use, and prevent children’s access to car keys. The interior trunk lid r[...]

OPENING THE FUEL -FILLER DOOR The fuel-filler door automatically unlocks when the driver’s door is unlocked. 1. Unlock the fuel-filler door using one of the following operations. ● Unlock the driver’s door with the Intelli- gent K ey. ● Push the power door lock switch to the unlock position. ● Push the door handle request switch. 2. T o o[...]

CAUTION ● Do not use E-15 or E-85 fuel in your vehicle. For additional information, re- fer to “Fuel recommendation” in the “T echnical and consumer information” section of this manual. ● The LOOSE FUEL CAP warning will ap- pear if the fuel-filler cap is not properly tightened. It may take a few driving trips for the message to be displ[...]

L OOSE FUEL CAP warning The L OOSE FUEL CAP warning appears in the vehicle information display when the fuel-filler cap is not tightened correctly after the vehicle has been refueled. It may take a few driving trips for the message to be displayed. T o turn off the warning, perform the following: 1. Remove and install the fuel-filler cap as soon as[...]

AUT OMA TIC OPERA TION (if so equipped) Tilt and telescopic operation T o adjust the steering wheel move the switch 䊊 1 in the following directions: ● Adjust the steering wheel up or down in direction 䊊 2 to the desired tilt position. ● Adjust the steering wheel forward or back- ward in direction 䊊 3 to the desired tele- scopic position. [...]

䊊 1 T o block glare from the front, swing down the sun visor. 䊊 2 T o block glare from the side, remove the sun visor from the center mount and swing the visor to the side. 䊊 3 Slide the extension sun visor in or out as needed. CAUTION ● Do not store the sun visor before return- ing the extension to its original position. ● Do not pull th[...]

AUT OMA TIC ANTI-GLARE REARVIEW MIRROR The inside mirror is designed so that it automati- cally dims during night time conditions and ac- cording to the intensity of the headlights of the vehicle following you. The automatic anti-glare feature is activated when the ignition switch is in the ON position. The indicator light will illuminate when the [...]

WARNING ● Objects viewed in the outside mirror on the passenger side are closer than they appear. Be careful when moving to the right. Using only this mirror could cause an accident. Use the inside mirror or glance over your shoulder to properly judge distances to other objects. ● Do not adjust the mirrors while driving. Y ou could lose control[...]

The automatic drive positioner system has two features: ● Memory storage function ● Entry/exit function MEMOR Y ST ORAGE FUNCTION T wo positions for the driver’s seat, steering column (if so equipped) , and outside mirrors can be stored in the automatic drive positioner memory. Follow these procedures to use the memory system. 1. Place the ig[...]

Linking an Intelligent Key to the meter display (if so equipped) Each Intelligent Key , up to a maximum of four, can be linked to the meter display . 1. Make sure to turn ON the “Key-Linked Set- tings” in the meter to enable the system for desired Intelligent K ey. 2. When the system is enabled, the recognized Intelligent Key is displayed at st[...]

● When the adjusting switch for the driver’s seat and steering column is turned on while the automatic drive positioner is operating. ● When the seat has already been moved to the memorized position. ● When no seat position is stored in the memory switch. 3-32 Pre-driving checks and adjustments[...]

4 Monitor, climate, audio, phone and voice recognition systems RearView Monitor (if so equipped) ...................4 - 2 RearView Monitor system operation ..............4 - 3 How to read the displayed lines ..................4 - 3 Difference between predicted and actual distances ......................................4 - 4 How to park with predict[...]

1. CAMERA button WARNING ● Failure to follow the warnings and in- structions for proper use of the Rear- View Monitor system could result in se- rious injury or death. ● RearView Monitor is a convenience fea- ture and is not a substitute for proper backing. Always turn and look out the windows and check mirrors to be sure that it is safe to mov[...]

● The system is designed as an aid to the driver in showing large stationary ob- jects directly behind the vehicle, to help avoid damaging the vehicle. ● The distance guide line and the vehicle width line should be used as a reference only when the vehicle is on a level paved surface. The distance viewed on the monitor is for reference only and[...]

V ehicle width guide lines 䊊 5 Indicate the vehicle width when backing up. Predicted course lines 䊊 6 Indicate the predicted course when backing up. The predicted course lines will be displayed on the monitor when the shift lever is in the R (Re- verse) position and the steering wheel is turned. The predicted course lines will move depending on[...]

Backing up near a projecting object The predicted course lines 䊊 A do not touch the object in the display. However, the vehicle may hit the object if it projects over the actual backing up course. Backing up behind a projecting object The position 䊊 C is shown farther than the position 䊊 B in the display. However, the position 䊊 C is actual[...]

1. Visually check that the parking space is safe before parking your vehicle. 2. The rear view of the vehicle is displayed on the screen 䊊 A when the shift lever is moved to the R (Reverse) position. 3. Slowly back up the vehicle adjusting the steering wheel so that the predicted course lines 䊊 B enter the parking space 䊊 C . 4. Maneuver the [...]

ADJUSTING THE SCREEN 1. While on a RearView Monitor screen, touch the touch-screen display. The Camera Set- tings screen will come up. 2. T ouch the Display Settings key. 3. T ouch the “Brightness,” “Contrast,” “Tint,” “Color,” or “Black Level” key . 4. Adjust the item by touching the + or — key on the touch-screen display . N[...]

● Use the displayed lines as a reference. The lines are highly affected by the number of occupants, fuel level, vehicle position, road conditions and road grade. ● Make sure that the trunk is securely closed when backing up. ● Do not put anything on the rearview camera. The rearview camera is in- stalled above the license plate. ● When wash[...]

1. CAMERA button LHA3579 AROUND VIEW® MONITOR (if so equipped) Monitor, climate, audio, phone and voice recognition systems 4-9[...]

WARNING ● Failure to follow the warnings and in- structions for the proper use of the Around View® Monitor system could result in serious injury or death. ● The Around View® Monitor is a conve- nience feature and is not a substitute for proper vehicle operation because it has areas where objects cannot be viewed. The four corners of the vehic[...]

additional information on the front and rear sonar system (if so equipped) , refer to “Front and rear sonar system” in the “Starting and driving” sec- tion of this manual. The screen displayed on the Around View® Monitor will automatically return to the previous screen 3 minutes after the CAMERA button has been pressed with the shift lever[...]

V ehicle width guide lines 䊊 5 : Indicate the approximate vehicle width when backing up. Predicted course lines 䊊 6 : Indicate the predicted course when operating the vehicle. The predicted course lines will be dis- played on the monitor when the steering wheel is turned. The predicted course lines will move de- pending on how much the steering[...]

The non-viewable area 䊊 2 is highlighted in yellow for several seconds after the bird’s-eye view is displayed. It will be shown only the first time after the ignition switch is placed in the ON position. The driver can check the approximate direction and angle of the tire on the display by the tire icon 䊊 3 when driving the vehicle forward or[...]

Backing up on a steep uphill When backing up the vehicle up a hill, the dis- tance guide lines and the vehicle width guide lines are shown closer than the actual distance. Note that any object on the hill is further than it appears on the monitor. Backing up on a steep downhill When backing up the vehicle down a hill, the distance guide lines and t[...]

Backing up behind a projecting object The position 䊊 C is shown farther than the position 䊊 B in the display. However, the position 䊊 C is actually at the same distance as the position 䊊 A . The vehicle may hit the object when backing up to the position 䊊 A if the object projects over the actual backing up course. HOW T O PARK WITH PREDIC[...]

3. Slowly back up the vehicle adjusting the steering wheel so that the predicted course lines 䊊 B enter the parking space 䊊 C . 4. Maneuver the steering wheel to make the vehicle width guide lines 䊊 D parallel to the parking space 䊊 C while referring to the pre- dicted course lines. 5. When the vehicle is parked in the space completely , mo[...]

ADJUSTING THE SCREEN 1. T ouch the touch-screen display with the Around View® Monitor on. 2. T ouch the “Brightness,” “Contrast,” “Tint,” “Color,” or “Black Level” key . 3. Adjust the item by touching the + or — key on the touch-screen display . NO TE: Do not adjust any of the display settings of the Around View® Monitor whi[...]

● Do not strike the cameras. They are precision instruments. Doing so could cause a malfunction or cause damage resulting in a fire or an electric shock. There are some areas where the system will not show objects and the system does not warn of moving objects. When in the front or rear view display , an object below the bumper or on the ground m[...]

When the “[X]” icon is displayed on the screen, the camera image may be receiving temporary electronic disturbances from surrounding de- vices. This will not hinder normal driving opera- tion but the system should be inspected by a NISSAN dealer if it occurs frequently . S Y STEM MAINTENANCE CAUTION ● Do not use alcohol, benzine or thinner to[...]

1. CAMERA button LHA3579 MOVING OBJECT DETECTION (MOD) (if so equipped) 4-20 Monitor, climate, audio, phone and voice recognition systems[...]

WARNING ● Failure to follow the warnings and in- structions for proper use of the Moving Object Detection system could result in serious injury or death. ● The MOD system is not a substitute for proper vehicle operation and is not de- signed to prevent contact with objects surrounding the vehicle. When maneu- vering, always use the outside mirr[...]

● When the shift lever is in the R (Reverse) position and the vehicle speed is below ap- proximately 6 mph (10 km/h), the MOD sys- tem detects moving objects in the rear view. The MOD system will not operate if the trunk is open. The MOD system does not detect moving ob- jects in the front-side view. The MOD icon is not displayed on the screen wh[...]

● Do not use the MOD system when tow- ing a trailer. The system may not func- tion properly. ● Excessive noise (for example, audio system volume or open vehicle window) will interfere with the chime sound, and it may not be heard. ● The MOD system performance will be limited according to environmental con- ditions and surrounding objects such[...]

Adjust air flow direction by moving the vent slides. Open or close the vents by using the dial. Move the dial toward the to open the vents or toward the to close them. Side LHA3577 Center LHA3578 Rear (center console) LHA3599 VENTS 4-24 Monitor, climate, audio, phone and voice recognition systems[...]

1. FRONT (defroster) button 2. T emperature control dial (driver’s side)/ AUT O button 3. Display screen 4. T emperature control dial (passenger’s side)/DUAL button 5. Fresh air intake button 6. Air recirculation button 7. A/C (air conditioner) button 8. MODE (manual air flow control) button 9. (fan speed control) buttons 10. ON-OFF button 11. [...]

NO TE: ● Odors from inside and outside the vehicle can build up in the air conditioner unit. Odor can enter the passenger compartment through the vents. ● When parking, set the heater and air condi- tioner controls to turn off air recirculation to allow fresh air into the passenger compart- ment. This should help reduce odors inside the vehicle[...]

Remote engine start logic (if so equipped) V ehicles equipped with automatic climate con- trols and remote start function may go into auto- matic heating or cooling mode when remote start is activated depending on outside and cabin tem- peratures. Automatic temperature depends on outside and cabin temperatures. During this pe- riod, the climate con[...]

The sunload sensor, located on the driver’s side of the instrument panel, helps the system main- tain a constant temperature. Do not put anything on or around this sensor. The air conditioner system in your NISSAN ve- hicle is charged with a refrigerant designed with the environment in mind. This refrigerant does not harm the earth’s ozone laye[...]

When installing a CB, ham radio or car phone in your vehicle, be sure to observe the following precautions; otherwise, the new equipment may adversely affect the engine control system and other electronic parts. WARNING ● A cellular phone should not be used for any purpose while driving so full atten- tion may be given to vehicle operation. Some [...]

For additional information, refer to the separate Navigation Owner’s Manual. NISSAN VOICE RECOGNITION S Y STEM 4-30 Monitor, climate, audio, phone and voice recognition systems[...]

5 Starting and driving Precautions when starting and driving ................5 - 4 Exhaust gas (carbon monoxide) ..................5 - 4 Three-way catalyst ..............................5 - 4 Tire Pressure Monitoring System (TPMS) ..........5 - 5 Avoiding collision and rollover . . ..................5 - 8 Off-road recovery .........................[...]

FEB system operation .......................... 5-57 T urning the FEB system on/off . . ................ 5-59 FEB system limitations ......................... 5-59 System temporarily unavailable .................. 5-60 System malfunction ............................ 5-61 System maintenance ........................... 5-61 Predictive Forward Collisi[...]

Active noise cancellation/Active sound enhancement (if so equipped) ...................... 5-88 Active noise cancellation ....................... 5-88 Active sound enhancement ..................... 5-88[...]

WARNING ● Do not leave children or adults who would normally require the assistance of others alone in your vehicle. Pets should also not be left alone. They could accidentally injure themselves or others through inadvertent operation of the vehicle. Also, on hot, sunny days, temperatures in a closed vehicle could quickly become high enough to ca[...]

● Do not stop or park the vehicle over flammable materials such as dry grass, waste paper or rags. They may ignite and cause a fire. CAUTION ● Do not use leaded gasoline. Deposits from leaded gasoline will seriously re- duce the three-way catalyst’s ability to help reduce exhaust pollutants. ● Keep your engine tuned up. Malfunc- tions in th[...]

Additional information: ● The TPMS does not monitor the tire pressure of the spare tire. ● The TPMS will activate only when the vehicle is driven at speeds above 16 mph (25 km/h). Also, this system may not detect a sudden drop in tire pressure (for example a flat tire while driving) . ● The low tire pressure warning light does not automatical[...]

● When a spare tire is mounted or a wheel is replaced, tire pressure will not be indicated, the TPMS will not function and the low tire pressure warning light will flash for approximately 1 minute. The light will remain on after 1 minute. Contact a NISSAN dealer as soon as possible for tire replacement and/or system resetting. ● Replacing tires[...]

3. When the designated pressure is reached, the horn beeps once and the hazard indica- tors stop flashing. 4. Perform the above steps for each tire. ● If the tire is over-inflated more than ap- proximately 4 psi (30 kPa) , the horn beeps and the hazard indicators flash three times. T o correct the pressure, push the core of the valve stem on the [...]

3. Maintain a firm grip on the steering wheel with both hands and try to hold a straight course. 4. When appropriate, slowly release the accel- erator pedal to gradually slow the vehicle. 5. If there is nothing in the way , steer the ve- hicle to follow the road while vehicle speed is reduced. Do not attempt to drive the ve- hicle back onto the roa[...]

NISSAN is committed to safe driving. However, you must choose not to drive under the influence of alcohol. Every year thousands of people are injured or killed in alcohol-related collisions. Al- though the local laws vary on what is considered to be legally intoxicated, the fact is that alcohol affects all people differently and most people underes[...]

If the battery of the vehicle is discharged, the push-button ignition switch cannot be moved from the LOCK position. Some indicators and warnings for operation are displayed on the vehicle information display. For additional information, refer to “V ehicle informa- tion display” in the “Instruments and controls” section of this manual. OPER[...]

ACC has a battery saver feature that will turn the ignition switch to the OFF position after a period of time under the following conditions: ● All doors are closed. ● Shift lever is in P (Park) . ● Hazard lamps are off. ● T urn signals are off. The battery saver feature will be cancelled if any of the following occur: ● Any door is opene[...]

NISSAN INTELLIGENT KEY® BA TTER Y DISCHARGE If the battery of the NISSAN Intelligent K ey® is discharged, or environmental conditions interfere with the Intelligent Key operation, start the engine according to the following procedure: 1. Place the shift lever in the P (Park) position. 2. Firmly apply the foot brake. 3. T ouch the ignition switch [...]

● Make sure the area around the vehicle is clear. ● Check fluid levels such as engine oil, cool- ant, brake fluid, and window washer fluid as frequently as possible, or at least whenever you refuel. ● Check that all windows and lights are clean. ● Visually inspect tires for their appearance and condition. Also check tires for proper inflati[...]

NO TE: Care should be taken to avoid situations that can lead to potential battery discharge and potential no-start conditions such as: 1. Installation or extended use of electronic accessories that consume battery power when the engine is not running (Phone char- gers, GPS, DVD players, etc.) 2. V ehicle is not driven regularly and/or only driven [...]

The CVT can operate in two different automatic drive modes: ● D (Drive) mode - Move the shift lever to D (Drive) , the transmission is in the normal forward automatic driving mode. The posi- tion indicator in the meter shows a “D” . ● Manual shift mode - Move the shift lever over from D (Drive) to the left into the manual shift gate. The po[...]

T o move the shift lever: Press the button while depressing the brake pedal Press the button to shift Shift without pressing button Shifting After starting the engine, fully depress the brake pedal and move the shift lever from P (Park) to any of the desired shift positions. WARNING Apply the parking brake if the shift lever is in any position whil[...]

Manual shift mode The transmission enters the manual shift mode by moving the shift lever to the left side in the “D” range. Y ou can select the manual shift range either by moving the shift lever up or down, or by pulling the right-side or left-side paddle shifter (if so equipped) . T o cancel the manual shift mode, return shift lever to the r[...]

● The transmission will automatically down- shift the gears. (For example, if you select the 3rd range, the transmission will shift down between the 3rd and 1st gears.) When canceling the manual shift mode Return the shift lever to the D (Drive) position to return the transmission to the normal driving mode. ● In the manual shift mode, the tran[...]

T o move the shift lever, complete the following procedure: 1. Press the ignition switch to the LOCK posi- tion. 2. Apply the parking brake. 3. Using a protective cloth on the tip o fa3m m screwdriver, remove the shift lock release cover. ● If available, a plastic trim tool can also be used. 4. Insert the small screwdriver in the shift lock relea[...]

WARNING When the high fluid temperature protec- tion mode or fail-safe operation occurs, vehicle speed may be gradually reduced. The reduced speed may be lower than other traffic, which could increase the chance of a collision. Be especially careful when driving. If necessary, pull to the side of the road at a safe place and allow the transmission [...]

T wo driving modes can be selected by using the drive mode selector switches, NORMAL and SPORT . NO TE: ● When the drive mode select switch selects a mode, the mode may not switch quickly . This is not a malfunction. ● Select the NORMAL mode for normal driv- ing. NORMAL MODE NORMAL mode is recommended for normal driv- ing. Push the NORMAL mode [...]

The BSW system uses radar sensors 䊊 1 in- stalled near the rear bumper to detect other ve- hicles in an adjacent lane. The radar sensors can detect vehicles on either side of your vehicle within the detection zone shown as illustrated. This detection zone starts from the outside mirror of your vehicle and ex- tends approximately 10 ft (3.0 m) beh[...]

1. Side BSW/RCT A Indicator Light 2. BSW/RCT A Indicator BSW S Y STEM OPERA TION The BSW system operates above approximately 20 mph (32km/h) . If the radar sensors detect a vehicle in the detec- tion zone, the side BSW/RCT A indicator light (1) illuminates. If the turn signal is then activated, the system chimes (twice) and the side BSW/RCT A indic[...]

HOW T O ENABLE/DISABLE THE BSW S Y STEM Perform the following steps to enable or disable the BSW system. 1. Press the button until “Settings” dis- plays in the vehicle information display and then press OK. Use the button to select “Driver Assistance” . Then press the OK button. 2. Select “Blind Spot” and press the OK but- ton. NO TE: ?[...]

BSW S Y STEM LIMIT A TIONS WARNING Listed below are the system limitations for the BSW system. Failure to operate the vehicle in accordance with these system limitations could result in serious injury or death. ● The BSW system cannot detect all ve- hicles under all conditions. ● The radar sensors may not be able to detect and activate BSW when[...]

BSW DRIVING SITUA TIONS Indicator on Indicator off Indicator flashing Another vehicle approaching from behind Illustration 1: The side BSW/RCT A indicator light illuminates if a vehicle enters the detection zone from behind in an adjacent lane. Illustration 2: If the driver activates the turn sig- nal when another vehicle is in the detection zone, [...]

Overtaking another vehicle Illustration 3: The side indicator light illuminates if you overtake a vehicle and that vehicle stays in the detection zone for approximately 2 seconds. Illustration 4: If the driver activates the turn sig- nal while another vehicle is in the detection zone, then the system chimes (twice) and the side indicator light flas[...]

Entering from the side Illustration 5: The side indicator light illuminates if a vehicle enters the detection zone from either side. Illustration 6: If the driver activates the turn sig- nal while another vehicle is in the detection zone, then the system chimes (twice) and the side indicator light flashes. NO TE: ● If the driver activates the tur[...]

S Y STEM TEMPORARIL Y UNA V AILABLE When radar blockage is detected, the system will be deactivated automatically. The “Side Radar Obstruction” warning message will appear and the BSW/RCT A indicator (white) will blink 䊊 A in the vehicle information display . The system is not available until the conditions no longer exist. The radar sensors [...]

Malfunction If the BSW system malfunctions, it will turn off automatically . The system malfunction warning message with the BSW/RCT A indicator (orange) will appear in the vehicle information display . NO TE: If the BSW system stops working, the RCT A system (if so equipped) will also stop work- ing. Action to take: Stop the vehicle in a safe loca[...]

For Canada Applicable law: Canada 310 This device complies with Industry Canada licence-exempt RSS standard(s) . Opera- tion is subject to the following two condi- tions: (1) this device may not cause inter- ference, and (2) this device must accept any interference, including interference that may cause undesired operation of the de- vice. Frequenc[...]

1. Side BSW/RCT A Indicator Light 2. BSW/RCT A Indicator RCT A S Y STEM OPERA TION The RCT A system can help alert the driver of an approaching vehicle when the driver is backing out of a parking space. When the shift position is in R (Reverse) and the vehicle speed is less than approximately 5 mph (8 km/h), the RCT A system is operational. If the [...]

The RCT A system uses radar sensors 䊊 1 in- stalled on both sides near the rear bumper to detect an approaching vehicle. The radar sensors 䊊 1 can detect an approaching vehicle from up to approximately 66 ft. (20 m) away . LSD2216 LSD2362 5-34 Starting and driving[...]

HOW T O ENABLE/DISABLE THE RCT A S Y STEM Perform the following steps to enable or disable the RCT A system. 1. Press the button until “Settings” dis- plays in the vehicle information display and then press OK. Use the button to select “Driver Assistance” . Then press the OK button. 2. Select “Blind Spot” and press the OK but- ton. When[...]

RCT A S Y STEM LIMIT A TIONS WARNING Listed below are the system limitations for the RCT A system. Failure to operate the vehicle in accordance with these system limitations could result in serious injury or death. ● Always check surroundings and turn to check what is behind you before back - ing up. The radar sensors detect ap- proaching (moving[...]

– Illustration b: When the vehicle is parked in an angled parking space. – Illustration c: When the vehicle is parked on inclined ground. – Illustration d: When an approaching vehicle turns into your vehicle’s park- ing lot aisle. – Illustration e: When the angle formed by your vehicle and approaching ve- hicle is small ● The following [...]

Illustration 2 LSD2044 LSD2416 5-38 Starting and driving[...]

S Y STEM TEMPORARIL Y UNA V AILABLE When radar blockage is detected, the system will be deactivated automatically. The “Side Radar Obstruction” warning message will appear and the BSW/RCT A indicator (white) will blink 䊊 A in the vehicle information display . The systems are not available until the conditions no longer exist. The radar sensor[...]

Do not attach stickers (including transparent ma- terial) , install accessories or apply additional paint near the radar sensors. Do not strike or damage the area around the radar sensors. Consult a NISSAN dealer if the area around the radar sensors is damaged due to a collision. Radio frequency statement For USA FCC : OA Y SRR2B This device compli[...]

WARNING Do not use the cruise control when driving under the following conditions: ● When it is not possible to keep the vehicle at a set speed. ● In heavy traffic or in traffic that varies in speed. ● On winding or hilly roads. ● On slippery roads (rain, snow, ice, etc .) . ● In very windy areas. Doing so could cause a loss of vehicle co[...]

● Push the CANCEL button. ● T ap the brake pedal. ● Push the switch off. The CRUISE in- dicator light in the instrument panel goes out. WARNING Failure to follow the warnings and instruc- tions for proper use of the ICC system could result in serious injury or death. ● ICC is not a collision avoidance or warn- ing technology. It is the driv[...]

ICC S Y STEM OPERA TION The ICC system maintains a selected distance from the vehicle in front of you within the speed range 0 to 90 mph (0 to 144km/h) up to the set speed. The set speed can be selected by the driver between 20 to 90 mph (32 to 144 km/h), based on road conditions. The vehicle travels at the set speed when the road ahead is clear. T[...]

For additional information, refer to “ Approach warning” in this section. The following items are controlled in the ICC system: ● When there are no vehicles traveling ahead, the ICC system maintains the speed set by the driver. The set speed range is between approximately 20 and 90 mph (32 and 144 km/h). ● When there is a vehicle traveling [...]

THE ICC SWIT CH The system is operated by the CRUISE switch and four control switches, all mounted on the steering wheel. 1. DIST ANCE switch: Changes the vehicle’s following distance: ● Long ● Middle ● Short 2. RES+ switch: Resumes set speed or increases speed in- crementally . 3. CANCEL switch: Deactivates the system without erasing the s[...]

2. Set vehicle speed indicator: Indicates the set vehicle speed. For Canadian models, the speed is dis- played in km/h. 3. Set distance indicator: Displays the selected distance between ve- hicles set with the distance switch. 4. V ehicle ahead detection indicator: Indicates whether it detects a vehicle in front of you. Operating ICC T o turn on th[...]

● When the shift lever is not in the D (Drive) or Manual mode ● When the parking brake is applied ● When the brakes are operated by the driver When the SET– switch is pushed under the following conditions, the system cannot be set. A warning chime will sound and a message will pop up: ● When the VDC system is off (T o use the ICC system, [...]

When passing another vehicle, the set speed indicator 䊊 B will flash when the vehicle speed exceeds the set speed. The vehicle detect indi- cator will turn off when the area ahead of the vehicle is open. When the pedal is released, the vehicle will return to the previously set speed. Even though your vehicle speed is set in the ICC system, you ca[...]

How to change the set distance to the vehicle ahead The distance to the vehicle ahead can be se- lected at any time depending on the traffic con- ditions. Each time the distance switch 䊊 A is pushed, the set distance will change to long, average, short and back to long again, in that sequence. Distance Approximate distance at 60 mph (100 km/h) [f[...]

NO TE: The approach warning chime may sound and the system display may blink when the ICC sensor detects objects on the side of the vehicle or on the side of the road. This may cause the ICC system to decelerate or accelerate the vehicle. The ICC sensor may detect these objects when the vehicle is driven on winding roads, narrow roads, hilly roads,[...]

● As there is a performance limit to the distance control function, never rely solely on the ICC system. This system does not correct careless, inattentive or absentminded driving, or overcome poor visibility in rain, fog, or other bad weather. Decelerate the vehicle speed by depressing the brake pedal, depend- ing on the distance to the vehicle [...]

The ICC system is designed to automatically check the sensor’s operation within the limita- tions of the system. The detection zone of the radar sensor is limited. A vehicle ahead must be in the detection zone to maintain the selected distance from the vehicle ahead. A vehicle ahead may move outside of the detec- tion zone due to its position wit[...]

S Y STEM TEMPORARIL Y UNA V AILABLE The following are conditions in which the ICC system may be temporarily unavailable. In these instances, the ICC system may not cancel and may not be able to maintain the selected follow- ing distance from the vehicle ahead. Condition A Under the following conditions, the ICC system is automatically canceled. A c[...]

Action to take When the conditions listed above are no longer present, turn the system off using the ICC CRUISE switch. T urn the ICC system back on to use the system. Condition B When the radar sensor area of the front bumper is covered with dirt or is obstructed, the ICC system will automatically be cancelled. If the sen- sor area is covered with[...]

S Y STEM MAINTENANCE The sensor for the ICC system 䊊 A is located on the front of the vehicle. T o keep the ICC system operating properly, be sure to observe the following: ● Always keep the sensor area clean. ● Do not strike or damage the areas around the sensor. Do not touch or remove the screw located on the sensor. Doing so could cause a [...]

WARNING Failure to follow the warnings and instruc- tions for proper use of the FEB system could result in serious injury or death. ● The FEB system is a supplemental aid to the driver. It is not a replacement for the driver’s attention to traffic condi- tions or responsibility to drive safely. It cannot prevent accidents due to care- lessness [...]

1. V ehicle ahead detection indicator 2. FEB system warning light FEB S Y STEM OPERA TION The FEB system will function when your vehicle is driven at speeds above approximately 3 mph (5 km/h). If a risk of a forward collision is detected, the FEB system will provide an initial warning to the driver by both a visual and audible alert. If the driver [...]

Depending on vehicle speed and distance to the vehicle ahead, as well as driving and roadway conditions, the system may help the driver avoid a forward collision or may help mitigate the conse- quences of a collision, should one be unavoid- able. If the driver is handling the steering wheel, accelerating or braking, the FEB system will func- tion l[...]

TURNING THE FEB S Y STEM ON/OFF Perform the following steps to turn the FEB sys- tems ON or OFF . 1. Press the button until “Settings” dis- plays in the vehicle information display and then press OK button. Use the button to select “Driver Assistance” . Then press the OK button. 2. Select “Emergency Brake” and press the OK button. 3. Se[...]

S Y STEM TEMPORARIL Y UNA V AILABLE Condition A When the radar sensor picks up interference from another radar source, making it impossible to detect a vehicle ahead, the FEB system is automatically turned off. The FEB system warning light (orange) will illu- minate. Action to take When the above conditions no longer exist, the FEB system will resu[...]

Action to take If the warning light (orange) comes on, stop the vehicle in a safe place, place the shift lever in the P (Park) position and turn the engine off. Clean the radar cover on the lower grille with a soft cloth, and restart the engine. If the warning light continues to illuminate, have the FEB system checked by a NISSAN dealer. NO TE: If [...]

For Canada This device complies with Industry Canada licence-exempt RSS standard(s) . Opera- tion is subject to the following two condi- tions: 1. This device may not cause interference, 2. This device must accept any interfer- ence, including interference that may cause undesired operation of the de- vice. WARNING Failure to follow the warnings an[...]

1. V ehicle ahead detection indicator 2. FEB system warning light LSD2424 Starting and driving 5-63[...]

PFCW S Y STEM OPERA TION The PFCW system operates at speeds above approximately 3 mph (5 km/h). If there is a potential risk of a forward collision, the PFCW system will warn the driver by blinking the vehicle ahead detection indicator, and sounding an audible alert. LSD2263 5-64 Starting and driving[...]

TURNING THE PFCW S Y STEM ON/OFF Perform the following steps to turn the PFCW system ON or OFF . 1. Press the button until “Settings” dis- plays in the vehicle information display and then press OK button. Use the button to select “Driver Assistance” . Then press the OK button. 2. Select “Emergency Brake” and press the OK button. 3. Sel[...]

PFCW S Y STEM LIMIT A TIONS Illustration A LSD2312 5-66 Starting and driving[...]

WARNING Listed below are the system limitations for the PFCW system. Failure to operate the vehicle in accordance with these system limitations could result in serious injury or death. ● The PFCW system cannot detect all ve- hicles under all conditions. ● The radar sensor does not detect the following objects: – Pedestrians, animals or obstac[...]

● The system is designed to automatically check the sensor’s functionality, within certain limitations. The system may not detect some forms of obstruction of the sensor area such as ice, snow, stickers, etc . In these cases, the system may not be able to warn the driver properly. Be sure that you check, clean and clear the sensor area regularl[...]

Illustration D LSD2313 Starting and driving 5-69[...]

S Y STEM TEMPORARIL Y UNA V AILABLE Condition A When the radar sensor picks up interference from another radar source, making it impossible to detect a vehicle ahead, the PFCW system is automatically turned off. The FEB system warning light (orange) will illu- minate. Action to take When the above conditions no longer exist, the PFCW system will re[...]

Action to take If the warning light (orange) comes on, stop the vehicle in a safe place, place the shift lever in the P (Park) position and turn the engine off. Clean the radar cover on the lower grille with a soft cloth, and restart the engine. If the warning light continues to illuminate, have the PFCW system checked by a NISSAN dealer. NO TE: If[...]

For Canada This device complies with Industry Canada licence-exempt RSS standard(s) . Opera- tion is subject to the following two condi- tions: 1. This device may not cause interference, 2. This device must accept any interfer- ence, including interference that may cause undesired operation of the de- vice. WARNING Failure to follow the warnings an[...]

DRIVER A TTENTION ALERT S Y STEM OPERA TION If the system detects driver fatigue or that driver attention is decreasing, the message “T ake a break?” appears in the vehicle information display and a chime sounds when the vehicle is driven at speeds above 37 mph (60 km/h). The system continuously monitors driver atten- tion and can provide multi[...]

HOW T O ENABLE/DISABLE THE DRIVER A TTENTION ALERT S Y STEM Perform the following steps to enable or disable the Driver Attention Alert system. 1. Press the button until “Settings” dis- plays in the vehicle information display and press the OK button. Use the button to select “Driver Assistance” . Then press the OK button. 2. Select “Driv[...]

CAUTION During the first 1,200 miles (2,000 km), follow these recommendations to obtain maximum engine performance and ensure the future reliability and economy of your new vehicle. Failure to follow these rec- ommendations may result in shortened engine life and reduced engine performance. ● Avoid driving for long periods at constant speed, eith[...]

6. Plan for the Shortest Route ● Utilize a map or navigation system to de- termine the best route to save time. 7. Avoid Idling ● Shutting off your engine when safe for stops exceeding 30–60 seconds saves fuel and reduces emissions. 8. Buy an Automated Pass for T oll Roads ● Automated passes permit drivers to use special lanes to maintain c[...]

WARNING ● Do not stop or park the vehicle over flammable materials such as dry grass, waste paper or rags. They may ignite and cause a fire. ● Safe parking procedures require that both the parking brake be set and the transmission placed into P (Park) . Fail- ure to do so could cause the vehicle to move unexpectedly or roll away and re- sult in[...]

WARNING ● If the engine is not running or is turned off while driving, the power assist for the steering will not work. Steering will be harder to operate. ● When the power steering warning light illuminates with the engine running, there will be no power assist for the steering. Y ou will still have control of the vehicle but the steering will[...]

WARNING ● While driving on a slippery surface, be careful when braking, accelerating or downshifting. Abrupt braking or accel- erating could cause the wheels to skid and result in an accident. ● If the engine is not running or is turned off while driving, the power assist for the brakes will not work. Braking will be harder. W et brakes When th[...]

WARNING Do not pump the brake pedal. Doing so may result in increased stopping distances. Self-test feature The ABS includes electronic sensors, electric pumps, hydraulic solenoids and a computer. The computer has a built-in diagnostic feature that tests the system each time you start the engine and move the vehicle at a low speed in forward or rev[...]

When the VDC system operates, the indi- cator in the instrument panel flashes to note the following: ● The road may be slippery or the system may determine some action is required to help keep the vehicle on the steered path. ● Y ou may feel a pulsation in the brake pedal and hear a noise or vibration from under the hood. This is normal and ind[...]

● When driving on extremely inclined sur- faces such as higher banked corners, the VDC system may not operate prop- erly and the indicator may flash or the indicator light may illuminate. Do not drive on these types of roads. ● When driving on an unstable surface such as a turntable, ferry, elevator or ramp, the indicator may flash or the indic[...]

WARNING The active trace control may not be effec- tive depending on the driving condition. Always drive carefully and attentively. When the Active T race Control is operating, you may feel a pulsation in the brake pedal and hear a noise. This is normal and indicates that the Active T race Control is operating properly. Even if the Active T race Co[...]

The sonar (parking sensor) system sounds a tone to inform the driver of obstacles near the bumper. When the “DISPLA Y” key is ON, the sonar view will automatically appear in the meter. WARNING ● The sonar (parking sensor) system is a convenience but it is not a substitute for proper parking. ● The driver is always responsible for safety dur[...]

Sonar Operation T able FR Sensor RR Sensor Range Sound Display Sound Display Px † x † R ooo o Nx†x † Do o x † o – Display/Beep when detect † – Display on camera view x – No Display and Beep The system is deactivated at speeds above 6 mph (10 km/h). It is reactivated at lower speeds. The intermittent tone will stop after 3 seconds [...]

FREEING A FROZEN DOOR L OCK T o prevent a door lock from freezing, apply de- icer through the key hole. If the lock becomes frozen, heat the key before inserting it into the key hole or use the remote keyless entry function on the Intelligent K ey. ANTIFREEZE In the winter when it is anticipated that the tem- perature will drop below 32°F (0°C) ,[...]

● Allow more stopping distance under these conditions. Braking should be started sooner than on dry pavement. ● Allow greater following distances on slippery roads. ● Watch for slippery spots (glare ice) . These may appear on an otherwise clear road in shaded areas. If a patch of ice is seen ahead, brake before reach- ing it. T ry not to brak[...]

ACTIVE NOISE CANCELLA TION This system uses three microphones 䊊 1 located inside the vehicle to detect engine booming noises. The system then automatically generates a noise cancelling sound through the speakers and woofer to reduce engine booming noise. NO TE: T o operate the active noise cancellation system properly: ● Do not cover the speake[...]

6 In case of emergency Hazard warning flasher switch ......................6 - 2 Emergency engine shut off .........................6 - 2 Flat tire ...........................................6 - 3 Tire Pressure Monitoring System (TPMS) ..........6 - 3 Changing a flat tire .............................6 - 3 Jump starting ............................[...]

Push the switch on to warn other drivers when you must stop or park under emergency condi- tions. All turn signal lights flash. WARNING ● If stopping for an emergency, be sure to move the vehicle well off the road. ● Do not use the hazard warning flashers while moving on the highway unless unusual circumstances force you to drive so slowly that[...]

TIRE PRESSURE MONIT ORING S Y STEM (TPMS) This vehicle is equipped with the Tire Pressure Monitoring System (TPMS) . It monitors tire pres- sure of all tires except the spare. When the low tire pressure warning light is lit and the “Tire Pressure Low-Add Air” warning appears in the vehicle information display , one or more of your tires is sign[...]

5. Raise the hood to warn other traffic and to signal professional road assistance person- nel that you need assistance. 6. Have all passengers get out of the vehicle and stand in a safe place, away from traffic and clear of the vehicle. WARNING ● Make sure the parking brake is securely applied and the CVT is shifted into P (Park) . ● Never cha[...]

Remove the tool box from the spare tire. Remove the spare tire. Jacking up vehicle and removing the damaged tire WARNING ● Never get under the vehicle while it is supported only by the jack. If it is nec- essary to work under the vehicle, sup- port it with safety stands. ● Use only the jack provided with your vehicle to lift the vehicle. Do not[...]

● Use the correct jack -up points. Never use any other part of the vehicle for jack support. ● Never jack up the vehicle more than necessary. ● Never use blocks on or under the jack. ● Do not start or run the engine while vehicle is on the jack. It may cause the vehicle to move. This is especially true for vehicles with limited slip differe[...]

Installing the spare tire The spare tire is designed for emergency use. For additional information, refer to “ Wheels and tires” in the “Maintenance and do-it-yourself” section of this manual. 1. Clean any mud or dirt from the surface be- tween the wheel and hub. 2. Carefully put the spare tire on and tighten the wheel nuts finger tight. 3.[...]

T o start your engine with a booster battery , the instructions and precautions below must be fol- lowed. WARNING ● If done incorrectly, jump starting can lead to a battery explosion, resulting in severe injury or death. It could also damage your vehicle. ● Explosive hydrogen gas is always pres- ent in the vicinity of the battery. Keep all spar[...]

WARNING Always follow the instructions below. Fail- ure to do so could result in damage to the charging system and cause personal injury. 1. If the booster battery is in another vehicle, position the two vehicles to bring their bat- teries near each other. Do not allow the two vehicles to touch. 2. Apply the parking brake. Move the shift lever to P[...]

CAUTION ● CVT models cannot be push-started or tow-started. Attempting to do so may cause transmission damage. ● Do not push start this vehicle. The 3-way catalyst may be damaged. If your vehicle is overheating (indicated by an extremely high temperature gauge reading) or if you feel a lack of engine power, detect abnormal noise, etc., take the[...]

6. After the engine cools down, check the cool- ant level in the engine coolant reservoir tank with the engine running. Add coolant to the engine coolant reservoir tank if necessary. Have your vehicle repaired at a NISSAN dealer. When towing your vehicle, all State (Provincial in Canada) and local regulations for towing must be followed. Incorrect [...]

T OWING RECOMMENDED BY NISSAN NISSAN recommends that your vehicle be towed with the driving (front) wheels off the ground or place the vehicle on a flat bed truck as illustrated. CAUTION ● Never tow CVT models with the front wheels on the ground or 4 wheels on the ground (forward or backward) , as this may cause serious and expensive damage to th[...]

VEHICLE RECOVER Y (freeing a stuck vehicle) There are two options to recover a stuck vehicle: pulling and rocking. For additional information regarding these options, please refer to the fol- lowing sections. Pulling a stuck vehicle WARNING T o avoid vehicle damage, serious personal injury or death when recovering a stuck vehicle: ● Contact a pro[...]

MEMO 6-14 In case of emergency[...]

7 Appearance and care Cleaning exterior ..................................7 - 2 W ashing ......................................7 - 2 W axing ........................................7 - 2 Removing spots ................................7 - 3 Underbody ....................................7 - 3 Glass .........................................7 - 3 Alumi[...]

In order to maintain the appearance of your ve- hicle, it is important to take proper care of it. T o protect the paint surfaces, please wash your vehicle as soon as you can: ● after a rainfall to prevent possible damage from acid rain ● after driving on coastal roads ● when contaminants such as soot, bird drop- pings, tree sap, metal particl[...]

REMOVING SPO TS Remove tar and oil spots, industrial dust, insects, and tree sap as quickly as possible from the surface of the paint to avoid lasting damage or staining. Special cleaning products are available at a NISSAN dealer or any automotive accessory store. UNDERBOD Y In areas where road salt is used in winter, it is necessary to clean the u[...]

● Do not apply wheel cleaners to the wheels when they are hot. The wheel temperature should be the same as am- bient temperature. ● Rinse the wheel to completely remove the cleaner within 15 minutes after the cleaner is applied. CHROME P ARTS Clean all chrome parts regularly with a non- abrasive chrome polish to maintain the finish. TIRE DRESSI[...]

CAUTION ● Never use benzine, thinner or any simi- lar material. ● Small dirt particles can be abrasive and damaging to leather surfaces and should be removed promptly. Do not use saddle soap, car waxes, polishes, oils, cleaning fluids, solvents, deter- gents or ammonia-based cleaners as they may damage the leather’s natural finish. ● Never [...]

AIR FRESHENERS Most air fresheners use a solvent that could affect the vehicle interior. If you use an air freshener, take the following precautions: ● Hanging-type air fresheners can cause per- manent discoloration when they contact ve- hicle interior surfaces. Place the air fresh- ener in a location that allows it to hang free and not contact a[...]

SEA T BEL TS The seat belts can be cleaned by wiping them with a sponge dampened in a mild soap solution. Allow the belts to dry completely in the shade before using them. For additional information, refer to “Seat belt maintenance” in the “Safety – Seats, seat belts and supplemental restraint sys- tem” section of this manual. WARNING Do [...]

CAUTION ● NEVER remove dirt, sand or other de- bris from the passenger compartment by washing it out with a hose. Remove dirt with a vacuum cleaner or broom. ● Never allow water or other liquids to come in contact with electronic compo- nents inside the vehicle as this may damage them. Chemicals used for road surface de-icing are extremely corr[...]

8 Maintenance and do-it-yourself Maintenance requirements ..........................8 - 2 General maintenance ..............................8 - 2 Explanation of general maintenance items .........8 - 2 Maintenance precautions ...........................8 - 5 Engine compartment check locations ................8 - 7 Engine cooling system ............[...]

Y our NISSAN has been designed to have mini- mum maintenance requirements with long ser- vice intervals to save you both time and money . However, some day-to-day and regular mainte- nance is essential to maintain your NISSAN’s good mechanical condition, as well as its emis- sions and engine performance. It is the owner’s responsibility to make[...]

When driving in areas using road salt or other corrosive materials, check lubrication frequently . Lights* Clean the headlights on a regular basis. Make sure that the headlights, stop lights, tail lights, turn signal lights, and other lights are all operating properly and installed securely . Also check headlight aim. Road wheel nuts (lug nuts)* Wh[...]

Steering wheel Check for changes in the steer- ing system, such as excessive freeplay, hard steering or strange noises. Warning lights and chimes Make sure all warning lights and chimes are operating properly. Windshield wiper and washer* Check that the wipers and washer operate properly and that the wipers do not streak. Windshield defroster Check[...]

additional information, refer to the “ Appearance and care” section of this manual. Windshield-washer fluid* Check that there is adequate fluid in the reservoir. When performing any inspection or maintenance work on your vehicle, always take care to prevent serious accidental injury to yourself or damage to the vehicle. The following are genera[...]

CAUTION ● Do not work under the hood while the engine is hot. T urn the engine off and wait until it cools down. ● Avoid contact with used engine oil and coolant. Improperly disposed engine oil, engine coolant and/or other vehicle fluids can damage the environment. Al- ways conform to local regulations for disposal of vehicle fluid. ● Never l[...]

VQ35DE engine 1. Engine coolant reservoir 2. Drive belt location 3. Engine oil filler cap 4. Brake fluid reservoir 5. Air cleaner 6. Fuse block 7. Fuse block/Fusible links 8. Fusible links 9. Battery 10. Engine oil dipstick 11. Radiator cap 12. P ower steering fluid reservoir 13. Windshield-washer fluid reservoir LDI2749 ENGINE COMPARTMENT CHECK LO[...]

The engine cooling system is filled at the factory with a pre-diluted mixture of 50% Genuine NISSAN Long Life Antifreeze/Coolant (blue) and 50% water to provide year-round antifreeze and coolant protection. The antifreeze solution con- tains rust and corrosion inhibitors. Additional en- gine cooling system additives are not necessary. WARNING ● N[...]

CHECKING ENGINE COOLANT LEVEL Check the coolant level in the reservoir when the engine is cold. If the coolant level is below the MIN level 䊊 B , add coolant to the MAX level 䊊 A . If the reservoir is empty, check the coolant level in the radiator when the engine is cold. If there is insufficient coolant in the radiator, fill the radiator with [...]

CHECKING ENGINE OIL LEVEL 1. Park the vehicle on a level surface and apply the parking brake. 2. Start the engine and let it idle until it reaches operating temperature. 3. T urn off the engine. Wait more than 10 minutes for the oil to drain back into the oil pan. 4. Remove the dipstick and wipe it clean. Re- insert it all the way . 5. Remove the d[...]

CHANGING ENGINE OIL 1. Park the vehicle on a level surface and apply the parking brake. 2. Start the engine and let it idle until it reaches operating temperature, then turn it off. 3. Remove the oil filler cap 䊊 A by turning it counterclockwise. 4. Remove clips 䊊 B from the under-engine pro- tector. 5. Place a large drain pan under the drain p[...]

WARNING ● Prolonged and repeated contact with used engine oil may cause skin cancer. ● T ry to avoid direct skin contact with used oil. If skin contact is made, wash thoroughly with soap or hand cleaner as soon as possible. ● Keep used engine oil out of reach of children. CAUTION Be careful not to burn yourself. The engine oil may be hot. 7. [...]

4. Remove pins 䊊 A from the right engine pro- tector located inside the right wheel well and then remove protector. Remove oil filter 䊊 B with an oil filter wrench by turning it counter- clockwise. Then remove the oil filter by turn- ing it by hand. CAUTION Be careful not to burn yourself. The engine oil may be hot. 5. Wipe the engine oil filte[...]

Check the fluid level in the reservoir. The fluid level should be checked when the fluid is cold at fluid temperatures of 32 to 86ºF (0 to 30ºC) . The fluid level can be checked with the level gauge which is attached to the cap. T o check the fluid level, remove the cap. The fluid level should be between the MAX 䊊 A and MIN 䊊 B lines. If the [...]

● Brake fluid is poisonous and should be stored carefully in marked containers out of reach of children. CAUTION Do not spill the fluid on any painted sur- faces. This will damage the paint. If fluid is spilled, immediately wash the surface with water. Check the fluid level in the reservoir. If the brake fluid is below the MIN line 䊊 B , the br[...]

● K eep the battery surface clean and dry. Clean the battery with a solution of baking soda and water. ● Make certain the terminal connections are clean and securely tightened. ● If the vehicle is not to be used for 30 days or longer, disconnect the negative (-) battery terminal cable to prevent discharge. NO TE: Care should be taken to avoid[...]

1. Remove the vent caps with a screwdriver as shown. Use a cloth to protect the battery case. 2. Check the fluid level in each cell. If it is necessary to add fluid, add only distilled water to bring the level up to the bottom of the filler opening. Do not overfill. Reinstall the vent caps. V ehicles operated in high temperatures or under severe co[...]

CAUTION ● Do not ground accessories directly to the battery terminal. Doing so will by- pass the variable voltage control sys- tem and the vehicle battery may not charge completely. ● Use electrical accessories with the en- gine running to avoid discharging the vehicle battery. Y our vehicle is equipped with a variable voltage control system. T[...]

1. Visually inspect the belt for signs of unusual wear, cuts, fraying or looseness. If the belt is in poor condition or is loose, have it replaced or adjusted by a NISSAN dealer. 2. Have the belt checked regularly for condi- tion and tension in accordance with the maintenance schedule found in the “NISSAN Service and Maintenance Guide”. REPLACI[...]

The air cleaner filter should not be cleaned and reused. Replace it according to the maintenance log shown in the “NISSAN Service and Mainte- nance Guide.” When replacing the filter, wipe the inside of the air cleaner filter housing and the cover with a damp cloth. T o remove the air cleaner filter: ● Unlatch the clips 䊊 A and move the air [...]

REPLACING Replace the wiper blades if they are worn. T o replace the windshield wiper blades, follow the procedure below: 1. Lift the wiper arm away from the windshield. 2. Push the release tab 䊊 B . 3. Move the wiper blade 䊊 A down and remove. 4. Insert the new wiper blade onto the wiper arm until it clicks into place. 5. Push wiper on to wind[...]

If the brakes do not operate properly, have the brakes checked by a NISSAN dealer. Self-adjusting brakes Y our vehicle is equipped with self-adjusting brakes. The front and rear disc-type brakes self-adjust every time the brake pedal is applied. WARNING See a NISSAN dealer for a brake system check if the brake pedal height does not return to normal[...]

ENGINE COMP ARTMENT CAUTION Never use a fuse of a higher or lower amperage rating than specified on the fuse box cover. This could damage the electrical system or cause a fire. If any electrical equipment does not come on, check for an open fuse. 1. Be sure the ignition switch and the headlight switch are in the OFF position. 2. Open the engine hoo[...]

P ASSENGER COMP ARTMENT CAUTION Never use a fuse of a higher or lower amperage rating than specified on the fuse box cover. This could damage the electrical system or cause a fire. If any electrical equipment does not operate, check for an open fuse. 1. Be sure the ignition switch and the headlight switch are in the OFF position. 2. Pull the fuse b[...]

CAUTION Be careful not to allow children to swallow the battery or removed parts. NISSAN INTELLIGENT KEY® Replace the battery in the Intelligent K ey as fol- lows: 1. Remove the mechanical key from the Intelli- gent K ey. 2. Insert a small flathead screwdriver 䊊 A into the slit 䊊 B of the corner and twist it to sepa- rate the upper part from t[...]

3. Replace the battery with a new one. Recommended battery: CR2032 or equiva- lent. ● Do not touch the internal circuit and elec- tric terminals as doing so could cause a malfunction. ● Hold the battery by the edges. Holding the battery across the contact points will seriously deplete the storage capacity . ● Make sure that the + side faces t[...]

HEADLIGHTS Replacing the halogen headlight bulb (if so equipped) The headlight is a semi-sealed beam type which uses a replaceable headlight (halogen) bulb. They can be replaced from inside the engine compartment without removing the headlight as- sembly . If headlight bulb replacement is required, see a NISSAN dealer. CAUTION ● Aiming is not nec[...]

EXTERIOR AND INTERIOR LIGHTS Item W attage (W) Bulb No. Headlight assembly (T ype A) (if so equipped)* High 65 H9 Low 55 H11 Daytime running/Park — — T urn signal 28/8 7444NA Side marker 5 W5W Headlight assembly (T ype B) (if so equipped)* High 65 H9 Low — — Daytime running/Park — — T urn 28/8 7444NA Side marker 5 W5W Front fog light* 1[...]

1. Map light 2. Personal light 3. Step light 4. Door mirror turn signal light (if so equipped) 5. Headlight assembly 6. Fog light 7. High-mounted stop light 8. License plate light 9. Backup (reversing) 10. Rear combination light Replacement procedures All other lights are either type A , B, C or D. When replacing a bulb, first remove the lens, lamp[...]

Use a cloth 䊊 1 to protect the housing. Use a cloth 䊊 1 to protect the housing. V anity mirror light LDI2096 Step light LDI0341 T runk light LDI2135 8-30 Maintenance and do-it-yourself[...]

If you have a flat tire, refer to “Flat tire” in the “In case of emergency” section of this manual. TIRE PRESSURE Tire Pressure Monitoring System (TPMS) WARNING Radio waves could adversely affect electric medical equipment. Those who use a pacemaker should con- tact the electric medical equipment manufacturer for the possible influ- ences b[...]

If the tires are used at speeds above 100 MPH (162 km/h) where it is legal to do so (on a race track for example) , the cold tire inflation pressure must be in- creased. For additional information, refer to “Checking tire pressure” in this section. Set the tire pressure to the normal cold tire inflation pressure when the vehicle speed or load i[...]

Tire and loading information label 䊊 1 Seating capacity: The maximum num- ber of occupants that can be seated in the vehicle. 䊊 2 V ehicle load limit: Refer to the loading information in the “T echnical and consumer information” section of this manual. 䊊 3 Original tire size: The size of the tires originally installed on the vehicle at th[...]

Checking tire pressure 1. Remove the valve stem cap from the tire. 2. Press the pressure gauge squarely onto the valve stem. Do not press too hard or force the valve stem side- ways, or air will escape. If the hissing sound of air escaping from the tire is heard while checking the pressure, reposition the gauge to eliminate this leakage. 3. Remove [...]

TIRE LABELING Federal law requires tire manufacturers to place standardized information on the sidewall of all tires. This information iden- tifies and describes the fundamental characteristics of the tire and also pro- vides the tire identification number (TIN) for safety standard certification. The TIN can be used to identify the tire in case of [...]

䊊 2 TIN (Tire Identification Number) for a new tire (example: DO T XX XX XXX XXXX) 1. DO T : Abbreviation for the “Depart- ment Of T ransportation”. The symbol can be placed above, below or to the left or right of the Tire Identification Number. 2. T wo-digit code: Manufacturer’s identification mark. 3. T wo-digit code: Tire size. 4. Three-[...]

Manufacturer or brand name is shown. Other Tire-related T erminology In addition to the many terms that are defined throughout this section, Intended Outboard Sidewall is (1) the sidewall that contains a whitewall, bears white lettering or bears manufacturer, brand, and/or model name molding that is higher or deeper than the same molding on the oth[...]

Generally , snow tires have lower speed ratings than factory equipped tires and may not match the potential maximum vehicle speed. Never ex- ceed the maximum speed rating of the tire. If you install snow tires, they must be the same size, brand, construction and tread pattern on all four wheels. For additional traction on icy roads, studded tires m[...]

Tire wear and damage 1. Wear indicator 2. Location mark WARNING ● Tires should be periodically in- spected for wear, cracking, bulg- ing or objects caught in the tread. If excessive wear, cracks, bulging or deep cuts are found, the tire(s) should be replaced. ● The original tires have built-in tread wear indicators. When the wear indicators are[...]

● If the wheels are changed for any rea- son, always replace with wheels which have the same off-set dimension. Wheels of a different off-set could cause premature tire wear, degrade ve- hicle handling characteristic s, affect the VDC system and/or interference with the brake disc s. Such interference can lead to decreased braking efficiency and/[...]

Spare tire (TEMPORARY USE ONL Y spare tire) Observe the following precautions if the TEM- PORAR Y USE ONL Y spare tire must be used. Otherwise, your vehicle could be damaged or involved in an accident: WARNING ● The spare tire should be used for emer- gency use only. It should be replaced with the standard tire at the first oppor- tunity to avoid[...]

MEMO 8-42 Maintenance and do-it-yourself[...]

9 T echnical and consumer information Recommended fluids/lubricants and capacities .......9 - 2 Fuel recommendation ...........................9 - 5 Engine oil and oil filter recommendations ..........9 - 7 Air conditioner system refrigerant and oil recommendations ..............................9 - 8 Specifications .................................[...]

The following are approximate capacities. The actual refill capacities may be slightly different. When refilling, follow the procedure described in the “Maintenance and do-it-yourself” section to determine the proper refill capacity. Capacity (Approximate) Recommended Fluids and Lubricants US measure Imp measure Liter Fuel 18 gal 15 gal 68 L ?[...]

Capacity (Approximate) Recommended Fluids and Lubricants US measure Imp measure Liter Continuously Variable T ransmission (CVT) fluid — — — • Genuine NISSAN CVT Fluid NS-3 • NISSAN recommends using Genuine NISSAN CVT Fluid NS-3 ONL Y in NISSAN CVT s. Do not mix with other fluids. Using fluids that are not equivalent to Genuine NISSAN CVT [...]

Capacity (Approximate) Recommended Fluids and Lubricants US measure Imp measure Liter Air conditioning system oil — — — • Genuine NISSAN A/C System oil ND-OIL8 or equivalent • For additional information, refer to “ Air condi- tioner system refrigerant and oil recommenda- tions” in this section of the manual. Windshield-washer fluid 1-[...]

FUEL RECOMMENDA TION NISSAN recommends the use of unleaded pre- mium gasoline with an octane rating of at least 91 AKI (Anti-Knock Index) number (Research octane number 96) . If unleaded premium gaso- line is not available, you may use unleaded regular gasoline with an octane rating of at least 87 AKI number (Research octane number 91) , but you ma[...]

● If a methanol blend is used, it should contain no more than 5% methanol (methyl alcohol, wood alcohol) . It should also contain a suitable amount of appropriate cosolvents and corro- sion inhibitors. If not properly formu- lated with appropriate cosolvents and corrosion inhibitors, such methanol blends may cause fuel system damage and/or vehicl[...]

ENGINE OIL AND OIL FIL TER RECOMMENDA TIONS Selecting the correct oil It is essential to choose the correct grade, quality and viscosity engine oil to ensure satisfactory engine life and performance. For additional infor- mation, refer to “Recommended fluids/lubricants and capacities” in this section. NISSAN recom- mends the use of an energy co[...]

Y our engine was filled with a high-quality engine oil when it was built. Y ou do not have to change the oil before the first recommended change interval. Oil and filter change intervals depend upon how you use your vehicle. Operation under the following conditions may require more frequent oil and filter changes: ● repeated short distance drivin[...]

ENGINE Model VQ35DE T ype Gasoline, 4-cycle, DOHC Cylinder arrangement 6-cylinder, V-block, Slanted at 60° Bore x Stroke in (mm) 3.760 x 3.205 (95.5 x 81.4) Displacement cu in (cm 3 ) 213.45 (3,498) Firing order 1–2–3–4–5–6 Idle speed No adjustment is necessary. CVT in N (Neutral) position Ignition timing (degree B.T.D.C. at idle speed) [...]

WHEELS AND TIRES Wheels Size Offset in (mm) Aluminum 18 x 8.5J 1.97 (50) Aluminum 19 x 8.5J 1.97 (50) Spare wheel- steel 17 x 4T 1.18 (30) Spare wheel- aluminium 19 x8.5J 1.97 (50) Tires 245/45R18 245/40R19 245/40WR19 Spare tires T145/80D17 245/40/R19 DIMENSIONS AND WEIGHTS Overall length in (mm) 192.8 (4,897) Overall width in (mm) 73.2 (1,860) Ove[...]

When planning to drive your NISSAN ve- hicle in another country, you should first find out if the fuel available is suitable for your vehi- cle’s engine. Using fuel with an octane rating that is too low may cause engine damage. All gasoline vehicles must be operated with unleaded gasoline. There- fore, avoid taking your vehicle to areas where app[...]

ENGINE SERIAL NUMBER The number is stamped on the engine as shown. F .M.V .S.S./C.M.V .S.S. CERTIFICA TION LABEL The Federal/Canadian Motor V ehicle Safety Standard (F .M.V .S.S./C.M.V .S.S.) certification la- bel is affixed as shown. This label contains valu- able vehicle information, such as: (GVWR) , (GA WR) , month and year of manufacture, (VIN[...]

TIRE AND L OADING INFORMA TION LABEL The cold tire pressure is shown on the Tire and Loading Information Label. The label is located as shown. AIR CONDITIONER SPECIFICA TION LABEL The air conditioner specification label is affixed to the underside of the hood as shown. Use the following steps to mount the front license plate: 1. Make holes on the p[...]

WARNING ● It is extremely dangerous to ride in a cargo area inside a vehicle. In a collision, people riding in these areas are more likely to be seri- ously injured or killed. ● Do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts. ● Be sure everyone in your vehicle is in a seat and using a se[...]

VEHICLE L OAD CAP ACITY Do not exceed the load limit of your ve- hicle shown as “The combined weight of occupants and cargo” on the Tire and Loading Information label. Do not exceed the number of occupants shown as “Seating Capacity” on the Tire and Load- ing Information label. T o get “the combined weight of occu- pants and cargo” , ad[...]

Steps for determining correct load limit 1. Locate the statement “The combined weight of occupants and cargo should never exceed XXX lbs or XXX kg” on your vehicle’s placard. 2. Determine the combined weight of the driver and passengers that will be riding in your vehicle. 3. Subtract the combined weight of the driver and passengers from XXX [...]

5. Determine the combined weight of luggage and cargo being loaded on the vehicle. That weight may not safely exceed the available cargo and luggage load capacity calculated in step 4. Before driving a loaded vehicle, confirm that you do not exceed the Gross Vehicle W eight Rating (GVWR) or the Gross Axle W eight Rating (GAWR) for your vehicle. For[...]

Do not tow a trailer with your vehicle. FLA T T OWING T owing your vehicle with all four wheels on the ground is sometimes called flat towing. This method is sometimes used when towing a vehicle behind a recreational vehicle, such as a motor home. CAUTION ● Failure to follow these guidelines can result in severe transmission damage. ● Whenever [...]

WARNING The traction grade assigned to this tire is based on straight-ahead braking traction tests, and does not include acceleration, cornering, hydroplaning, or peak traction characteristic s. T emperature A , B and C The temperature grades are A (the highest) , B, and C, representing the tire’s resistance to the generation of heat, and its abi[...]

For USA If you believe that your vehicle has a de- fect which could cause a crash or could cause injury or death, you should immedi- ately inform the National Highway T raffic Safety Administration (NHTSA) in addi- tion to notifying NISSAN. If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exis[...]

Due to legal requirements in some states and Canadian Provinces, your vehicle may be re- quired to be in what is called the “ready condi- tion” for an Inspection/Maintenance (I/M) test of the emission control system. The vehicle is set to the “ready condition” when it is driven through certain driving patterns. Usually, the ready condition [...]

Genuine NISSAN Service Manuals for this model year and prior can be purchased. A Genuine NISSAN Service Manual is the best source of service and repair information for your vehicle. This manual is the same one used by the factory- trained technicians working at NISSAN dealer- ships. Genuine NISSAN Owner’s Manuals can also be purchased. For USA Fo[...]

10 Index A Air bag (See supplemental restraint s y s t e m ) ..................... 1 - 4 0 Air bag system Front (See supplemental front impact air bag system) ............... 1 - 4 7 A i r b a g w a r n i n g l i g h t ........... 1 - 5 7 , 2 - 1 1 Air bag warning light, supplemental . .1-57, 2-11 A i r C l e a n e r ................... 8 - 2 0 Air[...]

Cold weather driving ............... 5 - 8 6 C o n s o l e b o x ................... 2 - 5 1 C o n s o l e l i g h t ................... 2 - 5 9 Continuously Variable T ransmission (CVT) . . .5-15 Continuously Variable T ransmission (CVT) fluid ...................... 8 - 1 3 Driving with Continuously V ariable T ransmission (CVT) ............. 5 - [...]

Fuel octane rating ............... 9 - 6 Fuel recommendation .......... 9 - 2 , 9 - 5 Loose fuel cap warning ........... 2 - 2 4 Fuel Cell Vehicle (FCV) System T i r e p r e s s u r e ................. 8 - 3 1 Fuel-filler door .................. 3 - 2 3 Fuel gauge ..................... 2 - 6 F u s e s ....................... 8 - 2 2 Fusible links .[...]

W arning labels (for SRS) .......... 1 - 5 7 LA T CH (Lower Anchors and T ethers for CHildren) System ...................... 1 - 2 3 License plate Installing the license plate .......... 9 - 1 3 Light A i r b a g w a r n i n g l i g h t ......... 1 - 5 7 , 2 - 1 1 Brake light (See stop light) ......... 8 - 2 8 Bulb check/instrument panel ......... [...]

Parking/parking on hills ........... 5 - 7 7 Parking brake ................... 5 - 2 1 P e r s o n a l l i g h t s .................. 2 - 5 9 Power Power door locks ............... 3 - 5 Power outlet ................. 2 - 4 6 Power rear windows ............. 2 - 5 3 Power steering fluid ............. 8 - 1 4 Power steering system ........... 5 - 7 [...]

Power steering system ........... 5 - 7 8 Steering wheel .................. 3 - 2 5 S t o p l i g h t ..................... 8 - 2 8 S t o r a g e ...................... 2 - 4 7 Storage tray ................... 2 - 5 0 S u n g l a s s e s c a s e ................. 2 - 4 8 S u n g l a s s e s h o l d e r ................ 2 - 4 8 S u n r o o f .......[...]

[...]

FUEL RECOMMENDA TION: NISSAN recommends the use of unleaded pre- mium gasoline with an octane rating of at least 91 AKI (Anti-Knock Index) number (Research octane number 96) . If unleaded premium gaso- line is not available, you may use unleaded regu- lar gasoline with an octane rating of at least 87 AKI number (Research octane number 91) , but you[...]