Nokia Mediamaster 9860 S manuale d’uso

GB 1 Owner’ s Manual MEDIAMASTER 9860 S[...]

GB 2[...]

GB 3 MEDIAMASTER 9860 S Contents GENERAL OPERA TION OF THE MEDIAMASTER 4 FOR YOUR SAFETY 4 REMOTE CONTROL 5 Rear and Front Panel 6 ABOUT THE SMARTCARD AND CA MODULE 7 Pay TV Services with a Smartcard (Viaccess) 7 Pay TV Services with a CA Module 7 PIN Code 7 INST ALLA TION OF THE MEDIAMASTER 8 Preparing the Remote Control 8 Connecting the Mediamast[...]

GB 4 GENERAL OPERA TION OF THE MEDIAMASTER Throughout this manual you will notice that the everyday opera- tion of your Mediamaster is based on a series of user friendly on- screen displays and menus. These menus will help you get the most from your Mediamaster , guiding you through installation, channel selection, viewing and many other functions.[...]

GB 5 T o switch the Mediamaster in and out of standby mode. EXIT TV T o return to the viewing mode from a menu without stor - ing settings (in menu mode). T o switch between TV or Radio (in viewing mode). T o turn the sound off/on (mute). - + T o adjust the volume of digital programmes. The Mediamaster’ s maximum level is controlled by the TV’ [...]

GB 6 AUDIO L R phono connectors Stereo outputs for connection to a HiFi system TV SCART for connec- tion to the TV AUX SCART for connection to a VCR, or an analogue satellite receiver * LNB cable also feeds the LNB with a supply voltage of 13/18 V (V/H polarisa- tion) and a 0/22 kHz signal (bandswitch). Max LNB current 500 mA. DIGIT AL AUDIO phono [...]

GB 7 Pay TV Services with a Smartcard (Viaccess) Only for Pay-TV services coded with the Viaccess CA system. • Insert your Smartcard fully into the lower left slot (Smart Card 2) behind the lid of the front panel of the Mediamaster . The gold chip should face downwards and inwards . PIN Code The Smartcard is loaded with a 4-digit code, also calle[...]

GB 8 The box for your Mediamaster should contain the following items: • the Mediamaster • a remote control with 2 AAA batteries • a SCART lead (fully featur ed 1,0 metre) • an aerial/RF lead (double screened 1,5 metres) • an Owner ’ s Manual (this document) • a Software License agreement INST ALLA TION OF THE MEDIAMASTER About the SCA[...]

GB 9 Connecting the Mediamaster to the TV • Connect the SCART lead between the main SCAR T socket on the TV and the TV SCART socket on the Mediamaster . • Connect an RF lead from the TV/VCR output on the Mediamaster to the RF input socket on the TV . • Connect the TV aerial to the TV AERIAL input socket on the Mediamaster . TV SCART There are[...]

GB 10 Connecting an Analogue Satellite Receiver and VCR Nokia Smart Priority Switch Analogue receiver Mediamaster Connecting a HiFi System • Connect an RCA/Cinch stereo cable from the AUDIO L R sock- ets on the Mediamaster to the LINE, AUX, SP ARE or EXTRA input sockets on your HiFi system. • If available you can connect an RCA/Cinch single cab[...]

GB 11 This procedure is necessary only if your Mediamaster is con- nected to the TV with an RF lead and no SCART leads are used. T o tune your TV to the RF signal you might also need your TV manual in addition to this manual. The steps below explain what to do if you have been unable to use SCAR T leads in your con- nection. • Plug in your Mediam[...]

GB 12 Language Select the desired menu language. This will also be the main language for audio and subtitling. General Information Once you have correctly connected the Mediamaster , you also have to perform a “ First T ime Installation. ” During this procedure, helpful information is displayed at the bot- tom of the menus. Please note! The OK [...]

GB 13 Antenna/Satellite Selection Select one of the alternatives from line 1 to 5 if you have a sin- gle antenna equipped with one LNB for receiving signals from either NILESA T , HOTBIRD, ASIASA T , ARABSA T or P ANAMSA T . Select the alternative from line 6 if you have one antenna with two LNBs or two antennas with one LNB on each for receiving s[...]

GB 14 FIRST TIME INST ALLA TION * ) About Signal Strength (AGC) and Signal Quality (SNR) The different signal indicators at the top of the menu provide in- formation about two things: AGC: The AGC, shown with a red bar , will indicate the average strength of any incoming signal, digital as well as analogue. SNR : When a programme from a satellite c[...]

GB 15 FIRST TIME INST ALLA TION Select this alternative when you have a single antenna equipped with 2 LNBs, or two antennas with one LNB on each, and want to watch channels from NILESA T/HOTBIRD. In this case you must first connect the LNBs to an external switch since there is only one antenna input on the Mediamaster . Once installed the switch a[...]

GB 16 Line on the Antenna Satellite Selection Menu One Antenna/One LNB Configuration Select this alternative if you have one LNB mounted on the an- tenna and you want to select another , not preprogrammed, sat- ellite. LNB T ype Select the local oscillator (L. O.) frequency valid for the present LNB. The most common values, including Universal LNB,[...]

GB 17 Multisatellite/DiSEqC Switch Configuration Select this alternative if your antenna system has more than one LNB . Y ou can connect up to 4 LNBs. The selection of the different LNBs must be controlled by an external switch. Refer to page 15, “ Con- nection of a DiSEqC switch. ” FIRST TIME INST ALLA TION LNB T ype Select the local oscillato[...]

GB 18 Channel Search Progress This menu will be shown as long as the Mediamaster is search- ing for channels to download All channels found will be listed in two columns on the screen; with TV channels in one column and Radio channels in the other . Please note that the search procedure may take a few minutes. When the search procedure has ended, t[...]

GB 19 VIEWING MODE General Information The following describes the basic functions of your Mediamaster while watching satellite TV or listening to satellite radio. Some of the functions described here are dependent on the Service Provider and can only be used if they are included in the transmitted programme information. Please note , that during t[...]

GB 20 VIEWING MODE The “i” (Information) Button The Mediamaster has the ability to display information about pro- grammes currently being broadcast as well as those being broad- cast next. This procedure is the same for both TV and Radio mode. • By pressing the “ i ” button while watching TV you will get a special Programme Information Ba[...]

GB 21 List of TV or Radio Channels At the channel search procedure, two Channel lists are created. One list named “ All TV ” containing all channels, and another named “ Free TV ” containing only free channels. In the “ All TV ” list scrambled channels are marked with a picture of a Smartcard (if this information is transmitted in the s[...]

GB 22 VIEWING MODE TV Release (0) With the 0 button you can toggle between analogue terrestrial TV , video, analogue and digital satellite TV signals. (This is only valid if the units are connected via SCART cables, and not by a RF connection.) Video Recording Please note, that during the recording of a programme, every- thing shown on the screen w[...]

GB 23 MAIN MENU General Information Many of the functions of the Mediamaster are available from the Main Menu. • Press MENU to open it. TV and Radio Channels Please refer to “ List of TV and Radio channels ” on page 21. Edit Channels From these menus you can create and edit channel lists. Y ou can, among other things, create favourite lists; [...]

GB 24 Create list From here you can create your own favourite lists, containing the channels you watch most frequently . Y ou can give each list a spe- cific name, e.g. “ Sport ” or “ Films. ” When a favourite list is selected, you see only those channels defined in the list. When you have given the list a name; press OK and you will en- te[...]

GB 25 Select Channels From this menu you add and remove the channels in your Favour - ite Lists. Y ou use the “ All TV ” or “ All Radio ” list as basis to se- lect the channels from. A channel is added or removed by pressing the OK button. The square to the right on a line will be empty for removed channels, and will contain an “ x ” fo[...]

GB 26 Rearrange Channels From here you can arrange the sequence for the channels within your favourite lists. • With , mark the channel you want to move to a new posi- tion within the list. • Press again and the right side of the marked channel will change to . • Move the channel to the desired position with and press OK . It is also possible[...]

GB 27 MAIN MENU Update Channels When new TV and radio channels are added to the different sat- ellites, you can check and automatically update the main and free channel lists. New channels will be marked with a star in the channel lists. After each download, check the channel lists for new channels marked with . During the search procedure the old [...]

GB 28 MAIN MENU System Configuration Y ou will be asked to enter your access code before you can open this menu. The code is preset to 1234 from the factory . (The code can be changed from the Parental Control menu. Re- fer to page 34.) If you want to customize the system to suit you better , you can specify some settings from the submenus in the ?[...]

GB 29 MAIN MENU Manual Search When you perform a Manual Search you first need to enter some parameters for the channel search to work. The information you need to enter in this menu is available in magazines covering satellite TV reception, on the Internet or from your Service Provider . T ransponder frequency : Specify the frequency in GHz. If you[...]

GB 30 MAIN MENU Edit Satellites When a new satellite has been sent into orbit, or if you select a not preprogrammed satellite, you can add it to the existing sat- ellite list. T o add a new satellite • Select the line “ New Satellite ” . • Press OK . • Enter the name of the new satellite. (How to enter a name is described on page 24.) •[...]

GB 31 MAIN MENU View attributes Chech position and orientation for different satellites by select- ing the line “ View Attributes ” . Delete Satellite Y ou can also delete an added satellite. (This is not possible for the factory preprogrammed satellites.) If you want to delete the satellite from which you right now are watching a channel, you [...]

GB 32 MAIN MENU TV Settings From here you can adjust settings concerning your TV . TV screen format Select your TV screen format. The 4:3 format is the standard format for most TV screens. Select 16:9 for a wide screen TV . TV signal If the teletext function does not work when watching channels from an analogue satellite receiver connected to the M[...]

GB 33 MAIN MENU Receiver Upgrade In order to keep the Mediamaster up-to-date, it will be possible to download new versions of the system software via satellite and from the Internet. New software may include new or im- proved features for existing menus. Enter this menu to check for new software. If new software is available you will get informatio[...]

GB 34 MAIN MENU Parental Control T o open this menu you will be asked to enter your access code. From the factory the access code is set to 1234 . The following settings can be altered from this menu. Receiver lock If you select “ On, ” you will have to enter the access code every time you start the Mediamaster from stand-by . Age Rating Contro[...]

GB 35 MAIN MENU System Information If you have to contact your service provider or a service center , they might ask for information available from this menu. There- fore, it is important that you first check the information in the following menus. Diagnostics T o find out the condition of certain parts of the Mediamaster , you can run a diagnostic[...]

GB 36 Conditional Access This menu will only be activated if you have inserted a valid Smart- card in the slot behind the front lid. If more than one CA system is activated, select the one from which you want information. The Viaccess Conditional Access (CA) System is embedded in the Mediamaster . A Smartcard that supports this standard can be used[...]

GB 37 Network A number of digital channels transmitted from one source. Grouped under separate headings in the chan- nel list. Parental control A feature that allows parents to "lock" programmes that they consider unsuitable for children. A "locked" chan- nel or programme can only be "unlocked" with the spe- cial paren[...]

GB 38 Problem The display on the front panel does not light up/is not lit. No sound or picture, but the front panel shows the time or - - : - -. No sound or picture. No sound or picture on horizontal modulated transponder . Bad picture/blocking error . There is no Welcome menu on the screen after you switched on the Mediamaster for the first time. [...]

GB 39 PROBLEM SOL VING FRONT P ANEL DISPLA Y Problem The remote control is not working. Y ou see the on-screen message. Viewing card error . Y ou have forgotten your secret PIN code. CA Module is not working. Black picture. Possible causes Battery exhausted. Remote control is incorrectly aimed. The Mediamaster is in standby mode. The Mediamaster ca[...]

GB 40 T ransmission Standards DVB, MPEG 2 LNB / T uner input Connector 1x F-type (LNB) RF input frequency 920-2150 MHz RF input power level -20 to -70 dBm Supply voltage 13,5 /18,5 V ± 5% Max. current 500 mA, overload protected Control voltage 22 kHz, 0,65 V pp DiSEqC T one burst A/B or Level 1.2 RF impedance 75 Ω RF modulator Input/output conne[...]

GB 41 Main Menu 1 TV Channels 2 Radio Channels 3 Edit Channels 4 Update Channels 5 Guide 6 System Configuration 7 User Preferences 8 System Information 9 Viaccess Embedded (9 Conditional Access) System Configuration 1 Channel Search 2 Edit Satellites 3 Antenna/Satellite Configuration 4 TV Settings 5 Time Adjustment 6 Receiver Upgrade 7 Reinstall Pa[...]

GB 42 Nokia is a registered trademark of Nokia Corporation www .nokia.com 66 76964-10 © 0019 www .nokia.com[...]